FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 445C Parts

Category: Steering

[Categories] [All 445C Parts] [All Ford Models]

Axle Fork and Shaft, Outer - Carraro 4WD front ends on Ford models 5610, 6610, 6810, 7610, 7710, 250C, 260C, 345C, 345D, 445A, 445C, 445D, 450, 455C, 545A, 545C, 545D, 555B, 555C, 555D, 655, 655A, 655C. This part replaces 83952526, CAR40760, N13510 (Item #: 156151, Ref: CAR40760) $259.00

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $13.98

Half Shaft Inner Seal - The measurements on this seal are: 62mm outside diameter, 42mm inside diameter, 14mm wide. This seal is used on the inner portion of a half shaft on Carraro front axles. Replaces OEM numbers 9968001, 73403999, CAR116723, 83952335, 1966164C1, 09968001, 3475332M1, KH1213, VKH1213 (Item #: 129289, Ref: CAR116723) $13.70

Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref: 247877A1) $60.00

Hydraulic Cylinder Seal Kit - For Ford Construction and industrial models 345C, 345D, 445C, 445D, 545C, 545D Replaces Ford OEM number FP459, , Compatible with New Holland Construction and industrial models B95, B95LR, B95TC, B110, B115, LB75, LB75B, LB90, LB90B, LB110, LB110B, LB115, LB115B, Replaces New Holland OEM number 87428620, (Item #: 168944) $26.40

Kingpin - MFWD Lower - For Ford / New Holland tractors with Mechanical Four Wheel Drive: 345C, 345D, 445, 445A, 445C, 445D, 450, 455C, 455D, 545, 545A, 545D, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D, 250C, 260C, 4610N, 5640, 6640, 6640O, 7740, 7740O, 7840, 7840O, 8240, 8340. This part replaces OEM numbers 83952503, CAR118526, 3475348M1, 153326212, 137700410835, N13504 (Item #: 156167, Ref: 83952503) $87.00

Power Steering Cylinder - This power steering cylinder is right hand on 4 wheel drive and left hand on 2 wheel drive. It measures 14.75 inches long and comes with ball joints has hydraulic ports of 1/4 inch 18 NPT. For models 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 450, 540A, 540B, 545A, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D, 250C, 260C. Also replaces 85999104, D8NN3D547AA, D8NN3D547AB. (Item #: 160294, Ref: 85999337) $215.00

Power Steering Cylinder - This power steering cylinder is left hand on 4 wheel drive and right hand on 2 wheel drive on 2 cylinder systems. Hydraulic ports of 1/4 inch 18 NPT. For models 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 450, 540A, 540B, 545A, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D, 250C, 260C. Replaces 85999338, 85999103, D8NN3A540AA, D8NN3A540AB. VERIFY PART NUMBER TO ENSURE YOU ARE ORDERING THE CORRECT CYLINDER. (Item #: 160295, Ref: 85999338) $200.00

Power Steering Motor - This power steering motor is used on the following Ford/New Holland models: 3910N, 3910V, 4110V, 4610V, 555C, 555D, 575D, 655C, 655D, 675D, 250C, 260C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 450, 540, 540A, 540B, 545, 545C, 545D. It replaces original part numbers 86585454, E3NN3A244DA, D8NN3A244AA. (Item #: 160077, Ref: E3NN3A244DA) $1000.00

Power Steering Pump - For tractor models 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A. Replaces D8NN3K514DC, E6NN3K514GA, E7NN3K514CA-E (Item #: 157714, Ref: E7NN3K514CA) $314.00

Power Steering Pump - E9NN3K514BA - For Ford Construction and industrial models 445C (12/88-8/93), 445D (9/92-9/96), 555C (11/88-8/93), 555D (9/93-7/96), 575D (9/93-7/96), 655C (11/88-8/93), 655D (9/93-7/96), 675D (9/93-7/96), Replaces Ford OEM number E9NN3K514BA, E9NN3K514BB, 81871798, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157744) $572.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.20

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Seal, Spindle Pin - For tractor models 1801, 250C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 3550, 4000, 4040, 4140, 420, 4400, 445, 445A, 445C, 450, 4500, 455, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6610O, 6810, 7010, 4610O, 8010, TT55, TT75. (Item #: 128511, Ref: TDBA3125A) $2.90

Spindle Repair Kit, Less Spindle - 1.23 inch pin, less spindle, with unfinished bushings. For tractor models 7010, 8010, 250C, 260C, 340B, 345C, 345D, 445A, 445C, 445D, 450, 540B, 545A, 545C, 545D, 555A, 555B, 655A. (Item #: 125386, Ref: EFPN3115A) $100.00

No
Picture
Spindle Repair Kit, With Spindle - 1.23" pin, with spindle, finished bushings. For tractor models 7010, 8010, 250C, 260C, 340B, 345C, 345D, 445A, 445C, 445D, 450, 540B, 545A, 545C, 545D, 555A, 555B, 655A. (Item #: 178370, Ref: S.75083) $455.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $40.00

Steering Motor Seal Kit - This Steering Motor Seal Kit has a 1.776 inch seal. It is used on Ford / New Holland models 5110, 5610, 5900, 6410, 6610, 7610, 7710, 7810, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35, 445C, 445D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655C, 655D, 675D. Replaces 83945793, F1NN3N991AA, E3NN3R513BA, E3NN3N991BA, 81871236, 86585241 (Item #: 178956, Ref: F1NN3N991AA) $171.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Tie Rod End, Carraro - Right Hand - For Ford Construction and industrial models 250C, 260C, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D (All with FWD), Replaces Ford OEM number 83930617, CAR87031, Length 4.160", 24 x 1.5 RH MM Thread, Right Hand Tie Rod End, Manufactured by Carraro to exact OEM specifications, For an economy version use Item #: 104702, (Item #: 159941) $92.00

Tie Rod End, Economy - Right Hand - For Ford Construction and industrial models 250C, 260C, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D (All with FWD), Replaces Ford OEM number 83930617, CAR87031, Length 4.160", 24 x 1.5 RH MM Thread, Right Hand Tie Rod End, For Carraro Version use Item #: 159941, (Item #: 104702) $28.90

Tie Rod LH Thread - This New Tie Rod End is used on Ford / New Holland (TRACTOR: 250C, 340), (INDUSTRIAL/CONSTRUCTION: 340A, 340B, 345C, 345D, 445, 445A, 445C, 450, 540A, 540B, 545A, 545C, 545D). It has 11/16 inch-18 LH Thread. Replaces D8NN3290AA (Item #: 168533, Ref: D8NN3290AA) $77.00

Tie Rod RH Thread - This New Tie Rod End is used on Ford / New Holland (TRACTOR: 250C, 340), (INDUSTRIAL/CONSTRUCTION: 340A, 340B, 345C, 345D, 445, 445A, 445C, 450, 540A, 540B, 545A, 545C, 545D). It has 11/16 inch-18 RH Thread. Replaces D8NN3289AA (Item #: 168142, Ref: D8NN3289AA) $65.00

Universal Joint - Many mechanical four wheel drive front axles use this universal joint. This part has 27mm cup diameter and is 70.9mm across (1.063 X 2.791 inches). Replaces OEM numbers 247543A1, 81882C1, 1-33-742-629, 137700420872, 144461A1, 137700420874, 195215A1, 337260A1, D149733, B507526, CAR40869, N14156, N14411, 9968059, 84355357, 85807283, 84990205, 9970163, 85805996, 87306931, CAR40889, 81874740, 85805996, 9968059, 09968059, 1-33-742-629, CAR40825, 84355357, AL71316, RE212902, ABP3002508, 508360, ABP3004431 (Item #: 158432, Ref: CAR40825) $34.80

Upper King Pin - Upper King Pin is used on Ford / New Holland models: 345C Indust/Const, 345D Indust/Const, 445C Indust/Const, 445D Indust/Const, 545C Indust/Const, 545D Indust/Const, 555C Indust/Const, 555D Indust/Const, 555E Indust/Const, 5610S, 5640, 575D Indust/Const, 575E Indust/Const, 655C Indust/Const, 655D Indust/Const, 655E Indust/Const, 6610S, 6640, 6640O, 675D Indust/Const, 675E Indust/Const, 6810S, 7610S, 7740, 7740O, 7840, 7840O, 8240, 8340, B110 Indust/Const, B110B Indust/Const, B90B Indust/Const, B95 Indust/Const, B95B Indust/Const, B95BTC Indust/Const, B95LR Indust/Const, B95TC Indust/Const, LB110 Indust/Const, LB110.B Indust/Const, LB75 Indust/Const, LB75.B Indust/Const, LB90 Indust/Const, LB90.B Indust/Const, LB95 Indust/Const, TB100, TB110, TB120, TB80, TB85, TB90, TS6000, TS6020, TS6030. Replaces CAR14063, CAR128880, 122260A1, 3523549M1, 47108555, 9968923 (Item #: 153436, Ref: 9968023) $56.00

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $123.80

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.30

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 445C Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy