FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 4600 Parts

Category: Steering

[Categories] [All 4600 Parts] [All Ford Models]

Axle Pin Locking Plate - This locking plate is used with 312659 Pin. Replaces C5NN3128B. (Item #: 153968, Ref: C5NN3128B) $11.70

Axle Pin, Front - Front axle pin, manual or power steering. Outside diameter 1.750 inches, inside diameter 1.125 inches, length 4.960 inches. For tractor models 2000, 3000, 4000 and their variant. (Item #: 151913, Ref: C5NN3127B) $32.00

Axle Pin, Front - This Heavy Duty Front Axle Pin is threaded. 1.750 inch outside diameter, 4.71 inch long, 4.00 inch usable length. For the following models built after 7/1958: 601, 701, 801, 901, 2000, 2100, 2600, 2610, 2810, 2910, 3100, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610. Uses C5NN3128B Flange. (Item #: 172932, Ref: 312659) $101.00

Axle Pivot Pin, Front - For Ford tractor models 3600 (1/75-12/81), 4100 (1/75-12/81), 4600 (1/75-12/81), 5200 ('67-later), 6600 ('75-9/76), 7000 ('67-later), 7200 ('67-later), 7600 ('75-9/76), Replaces New Holland OEM number C5NN3N159C, Front Axle Pivot Pin, (Item #: 170380) $92.00

Axle Spacer - For tractor models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Item #: 182791, Ref: C5NN3N030G) $5.10

Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751) $92.58

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $19.30

Ball Bearing, Steering Gear - Used with E1ADKN3556 Ball Race. 14 used for main nut, 10 used in upper shaft bearing, 10 used in lower shaft bearing. For tractor models Major, Super Major, 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Replaces 353075S. (Item #: 167684, Ref: 83424343) $0.50

Ball Joint Clamp - For Ford tractor models 2000, 3000, 3400, 3600, 4410, 4600, Compatible with Ford Construction and industrial models 230A, 231, 234, 335, 531, 532, Replaces Ford OEM number CLP16, Bolt not included, (Item #: 104711) $3.50

Bushing - Bushing Assembly, Upper. For tractor models 2600, 3600, 4100, 4600 (4/1976-1981); 5600, 6600, 7600 with manual steering (4/1976-1981);2610, 3610, 4110, 4610, 5610, 6610, 7610 with power steering (1981-3/1985).D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.10

Drag Link End - End, Rear, Right Hand, 29.625 inches to center of post, for Drag Link with Power Steering. For 2000, 2100, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3330, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340 (All 1/65 - 12/74), 4600, 4610 (All 10/84 - later). Compatible with Ford Construction and Industrial(s) 230A, 231, 234, 334, 335, 530, 531. (Item #: 104591, Ref: C5NN3307G) $100.00

Drag Link End - End, Rear, Left Hand, 28.125 inch tube length, for Drag Link with Power Steering. (2000, 3000 1965 to 1975), 2600, 3600, 4100 (1975 to 1981, less cab), 2610, 3610, 4110 (1981 to 9/1984). Replaces C3NN3308E, C5NN3306E, C5NN3308E, 81802895. (Item #: 104590, Ref: C5NN3308E) $116.00

Drag Link End - End, rear, 41.25 inches to center of post, for Drag Link with Power steering. For 4000, 1972-1975 and 4600. Replaces D0NN3307A, 81825596. (Item #: 104612, Ref: D0NN3307A) $84.00

Drag Link End, Rear - A= 40.00 inches long. For tractor models (4000 from 4/1970 to 1975 with manual steering), 4100, (4600 from 8/1970 to 12/1971 with power steering and from 1975 to 1981 with manual steering), (4610 1981 with manual steering). Replaces 81821968. Due to the length of this part, $22 addtional shipping is required. This will be added to the shipping total of your order. (Item #: 104611, Ref: C7NN3307A) $47.80

Drag Link Tube - 5.00 inches long. For tractor models 2000, 2031, 2100, 2110, 2120, 2131, 2150, 230A, 231, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 334, 3600, 3611, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4131, 4600, 4610, 530A, 531, 600, 601, 800, 801, NAA. All with serial number less than 78836. (Item #: 104582, Ref: C5NN3349A) $31.00

Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651) $79.00

Front Axle Bracket - Less Bushing - Fits 3230, 3430, 3930, 4000 (1965 and newer), 4100, 4130, 4330, 4340, 4600, 4610, 4630, 4830, 5030. Bushing part number C5NN3N052A is available separately. (Item #: 125388, Ref: C5NN3N050B) $113.00

Front Axle Bracket Bushing - This Front Axle Bracket Bushing is used with C5NN3N050B Front Axle Bracket. It replaces C5NN3N052A, 81802773 (Item #: 153973, Ref: C5NN3N052A) $8.10

Front Axle Support Bushing - For Ford tractor models 3230, 3430, 3930, 4000, 4100, 4130, 4330, 4340, 4600, 4610, 4630, 4830, 5030, Replaces Ford OEM number C5NN3A443A, 81802938, Length: 1.26" (32mm), I.D.: 1.63" (41.7mm), Wall Thickness: .07" (1.7mm), (Item #: 146706) $7.40

Front Socket - Drag Link End, front, 9.00 inch to center of post for drag link. 7/8 diameter, used with manual or power steering. Tractors: 3430, 3930, 4000 (1965 to 1975), 4130, 4600 (1975 to 1981), 4830, 5030 (with manual steering, 4/1970 and up). Replaces C5NN3A300A, 81825595, 83980679. (Item #: 100675, Ref: D0NN3A300A) $23.80

Front Wheel Hub Assembly - Fits Dexta, Super Dexta, (4600SU with P.S.). (Item #: 100659, Ref: C9NN1104F) $67.00

Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675) $9.60

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $143.28

Pitman Arm - This Steering Pitman Arm is used on manual and power steering gear boxes with a single drop arm. It has 36 splines and replaces original part numbers C5NN3590A and 81803153. For tractor models 2310, 2610, 2910, 3430, 3610, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 535, 5100, 5110, 5600, 5610, 6600, 6610 and 7600. (Item #: 104740, Ref: C5NN3590A) $189.54

No
Picture
Planetary Gear - For Ford tractor models 2310, 2810, 2910, 3055, 3230, 3430, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 575E, 655, 655A, 655C, 655D, 675D, 675E Replaces Ford OEM number 86584272, 81803330, , Compatible with New Holland tractor models TV140, TV145, TV6070, Compatible with New Holland Construction and industrial models B95, B95LR, B95TC, B110, B110B, LB75, LB75B, LB90, LB90B, LB110, LB110B, Replaces New Holland OEM number 86584272, (Item #: 176413) $98.00

Power Steering Ball Joint - Cylinder end with 7/16 inch internal threads. For OEM and Tisco power steering cylinders E2NN3A5AOBA with 1/2 inch diameter rod and D4NN3A54OA with 5/8 inch diameter rod. For models: 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 4600, 530A. (Item #: 104710, Ref: C5NN3A302B) $15.30

Power Steering Ball Joint Male - This Power Steering Ball Joint end measures 2.125 inches from the end of the threads to the center of the knuckle, and 5/8 diameter threads with 18 threads per inch. Cylinder end. For tractor models 2000, 230A, 231, 234, 2600, 3000, 334, 3400, 3600, 4000, 4410, 4600, 530A, 531, 532, 601, 801. (Item #: 161148, Ref: E2NN3A540BJ) $20.30

Power Steering Conversion Kit - Contains all parts necessary to convert manual steering to power steering. Does not work on tractors with a Loader. For the following 3 cylinder Models: 4000 and 4600 (except SU and Rowcrop). Kit contains mounting flange, power steering cylinder, long rod, hydraulic pump, oil tank, pressure tube, inlet hose, emptying tube, 2 tie rod ends, steering arm, hardware. (Item #: 104049, Ref: PSKF2) $540.00

Power Steering Conversion Kit - This kit contains all parts needed to convert manual steering on some FORD 4000 with straight front axle and 4600 tractors to power steering. NOTE: Not recommended for applications with front end loaders. For tractor models 4000 (1965 YEAR> 3 CYLINDER TRACTORS, 4600. (Item #: 104049, Ref: FD100) $540.00

$Ford 4600 Power Steering Cylinder - 1\2$
Power Steering Cylinder - 1/2 - For Ford tractor models 601, 611, 621, 631, 641, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 2110, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610, 4610SU, Compatible with Ford Construction and industrial models 230A, 231, 234, 334, 335, 530A, 531, 532, Replaces Ford OEM number E4NN3A547AA, E4NN3A540AA, Rod Diameter: 1/2", Thread: 7/16", 1/4" JIC Male Fittings, For use as left hand or right hand side, Do not mix rod sizes on tractor, For Tie Rod End use Item #: 104710, (Item #: 118803) $255.00

Power Steering Cylinder Repair Kit - For tractor models 2000, 230A, 231, 234, 3000, 335, 3600, 4600, 531, 601, 801. (Item #: 115362, Ref: E2NN3A540SK) $42.60

Power Steering Cylinder Repair Kit - This Power Steering Cylinder Repair Kit fits Ford Steering Cylinders with .625 inch rod, includes seals, piston and retainer. (Item #: 178078, Ref: CAPN3301A) $31.00

Power Steering Filter Kit - Power Steering Filter - Power Steering Filter for Pump Reservoir. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 5600, 5610, 5610S, 5700, 5900, 6600, 6610, 6610S, 6700, 6710, 7000, 7600, 7610, 7610S, 7700, 7710, 7810S, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5 Replaces 81818748, 84536381, 83936985, 83923728, EDPN3K758A, E0NN3K58AA, E0NN3K758AA, EDPN3K58A, K964924, K964931, K964954, 1004, CR1004, CR665, 665, 84419022, K262979, K964954. (Item #: 113433, Ref: EDPN3K758A) $11.70

Power Steering Hose Assembly - Flexible Power Steering Hose designed to replace rigid Ford tube assemblies. 54 inches long, 3/8 inch inside diameter. SAE 100 R1A single wire braid hose with 5/8 inch-18 thread, straight SAE flare female swivel on one end, 5/8 inch-18 thread SAE straight inverted flare on other. For tractor models 2000, 2600, 3000, 3500, 3600, 4000, 4600, 5000, 5600, 6600, 7000, 7600. Can replace tube assemblies C5NN3A562C, C7NN3A562C, C5NN3A541A, C7NN3A541A, C7NN3A541B, D0NN3A562A. (Item #: 178207, Ref: FPH54) $57.00

No
Picture
Power Steering Hydraulic Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number D7NN3A674B, E6NN3K514DA, 83959532, Front inlet hole size: 9/16" UNF, Front outlet hole size: 5/8" UNF, Inner maximum liters per minute: 12.5, Inner maximum gallon per minute: 2.75, Top hole spacing: 107, (Item #: 170931) $522.48

Power Steering O-Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655C, 655D, 675, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number D2NN3D587A, D7NN3D587A, (Item #: 154787) $0.50

Power Steering Pump - This power steering pump used with flair fitting on models using Steering Gear Box, pump has Relief Valve. For tractor models 2310, 234, 2610, 2810, 2910, 3230, 334, 335, 3430, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5100, 5600, 5610, 5900, 6600, 6610, 6710, 7100, 7600, 7610, 7710. Rated Pressure 725-1305 at 500-2000rpm. Safety valve Opening Pressure 942-1087 PSI, Safety Valve Full Open: 1087-1305 PSI. Unit designed for o-ring fitting, not supplied w/pump. This pump fits tractors with JIC fittings. Replaces 82858430, E6NN3K514PA99M (Item #: 113208, Ref: E6NN3K514PA99M) $270.00

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $182.80

No
Picture
Power Steering Pump - For Ford tractor models 4000 (1965-later w/ 3 cly. engine and straight axle), 4600 (all 3 cylinder), Replacement pump for power steering conversion kit, (Item #: 168052) $267.00

Power Steering Pump - E6NN3K514CA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (R (1/75-12/81), 2600 (N (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3600 (R (1/75-12/77), 3600 (1/75-12/81), 3600 (N (1/75-12/81), 3600 (NO, V (1/75-12/81), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600 (NO (10/75-12/81), 4600SU (1/75-7/78), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5600, 5700, 6600, 6600 (O), 6600, 6700, 7000, 7100, 7200, 7600, 7600, 7700, For Ford Construction and industrial models 231, 233, 333, 335, 420, 515, 531, 532, Replaces Ford OEM number E6NN3K514CA, 83959550, 850 PSI at 1000 RPM, 2.74 GPM, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157811) $307.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9/1968), (8000, 8600, 9000, 9600 1/1968-2/1973), (Industrials 3400, 3500, 4400, 4500 1965-4/1970). NOTE: This kit is for pumps that used 2 - single lip seals. If your pump uses one double lip seal, use kit 83910651. (Item #: 113930, Ref: DHPN3A674B) $12.10

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.20

Power Steering Seal Kit - Orbital Control Valve and Gear Box Gasket and Seal Kit. For tractor models (4000, 5000 from 7/1970 and up), 4600, 5600. 5610, 6600, 6610, 7000, 7600, 7610. NOTE If you are working on a 5600, 6600, 7600, 5610, 6610 or 7610 you will also need three E0NN3A590AA Teflon seals, sold seperately. Replaces EGPN3N503AA, C9NN3R668A, E1NN3N632AA, C9NN3N598A, C9NN3R669A, C9NN3C615A, 81803034. (Item #: 164631, Ref: EDPN3500A) $15.50

Power Steering Seal Kit - This Power Steering Seal Kit is used on steering gear assemblies. It contains (1) C9NN3747A, (1) C9NN3E614A, (2) C9NN3A590A, (2) C9NN3D624B, (1) E1NN3N632AA. Replaces EGPN3N503AA, 83957121 (Item #: 168433, Ref: EGPN3N503AA) $8.70

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Rocker Shaft - For Ford tractor models Major, Power Major, Super Major, 2310, 2610, 2910, 3500, 3610, 3910, 4000, 4110, 4400, 4500, 4600, 4610, Compatible with Ford Construction and industrial models 233, 334, 335, 420, 535, Replaces Ford OEM number C9NN3575C, Replaces New Holland OEM number 81822292, (Item #: 161600) $178.00

Spindle - LH - Used on Low-Clearance, Orchard, Vineyard and some 2WD industrial models, the dimensions on the spindle are A: 8.625 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The keyway is located at 9 o'clock. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104535, Ref: E9NN3106BA) $259.00

Spindle - RH - Used on Low-Clearance, Orchard, Vineyard and some 2WD industrial models, the dimensions on the spindle are A: 8.625 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The keyway is located at 9 o'clock. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104534, Ref: E9NN3105BA) $268.00

Spindle Bushing - FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Item #: 100617, Ref: 2N3109) $3.60

Spindle Bushing - Used on multiple Ford Tractors. It measures 1.6 inches outside diameter, 1.5 inches inside diameter and is 1.5 inches long. It replaces original part number C5NN3110B and 81802798. (Item #: 100628, Ref: C5NN3110B) $4.20

Spindle Left Hand - If you are using 10.00 x 16 inch tires on your Ford Tractor, this may be the left hand spindle you need. The measurements are A - 10.687 inches, B - 1.498 inches, C - 1.748 inches, D - 1.797 inches, E - 1.125\ inches. This spindle uses C0NN3A299A Thrust Bearing, C5NN3109A Upper Bushing, C5NN3110A Lower Bushing, -WBKFD7 Wheel Bearing Kit and 313020 Front Wheel Hub, 6 Bolt. Used on some of the following models: 3600, 4100, 4600, 5000, 5100, 5600, 6600, 7000, 7100, 7600. (Item #: 100639, Ref: D2NN3106C) $319.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Thrust Bearing - This spindle bearing is for models 2310, 2600, 2610, 2910, 3430, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4200, 4600, 4610, 4630 all replacing part numbers 81802806, and 81802871. Inside Diameter 1.496 inches. Outside Diameter 2.208 inches. Width 0.624 inches. (Item #: 100635, Ref: C5NN3A299A) $7.00

Spindle, LH - This spindle is for tractor models 4600, 4600SU, 4610. The spindle is Keyed and measures 12.25 inches in length, has a diameter of 1.46 inches and axle is 1.37 inches on the Inner axle and .750 inches on the Outer axle. Spindle for diesel and gas applications. The wheel bearing kit used for this spindle is part number EHPN1200C. (Item #: 100637, Ref: D4NN3106A) $78.00

Spindle, LH - This left spindle measures A= 15.937 inches, B= 1.498 inches, C= 1.638 inches, D= 1.748 inches, E 1.624 inches, F= .842 inch. For tractor models 5200 used with 7.50 x 18 x 16 front tires, 6600C used with 10.00 x 16 front tires, 7200 used with 7.50 x 18 x 16 front tires, 7600C used with 10.00 x 16 front tires. The wheel bearing kit used for this spindle is part number WBKFD6. (Item #: 104550, Ref: D2NN3106B) $336.00

Spindle, LH - This spindle measures A= 9.812 inches, B= 1.50 inches, C= 1.937 inches, D= 1.794 inches, E= 1.124 inches. For tractor models 3000, 335, 3400, 3600, 4000, 4100, 4410, 4600, 532. Replaces F2NN3105AA. The wheel bearing kit used for this spindle is part number WBKFD7. (Item #: 104539, Ref: C5NN3106E) $299.00

Spindle, RH - This spindle is for tractor models 4600, 4610, 4610SU. It has a Keyed, shaft measuring 12.25" inches in length and diameter of 1.46 inches. The measurement on the axle are 1.37inches on the inner axle and .750 inches on the outer axle. Spindle for diesel and gas applications. The wheel bearing kit used for this spindle is part number EHPN1200C. (Item #: 100636, Ref: D4NN3105A) $60.00

Spindle, RH - This spindle measures A= 9.812 inches, B= 1.50 inches, C= 1.937 inches, D= 1.794 inches, E= 1.124 inches. For tractor models 3000, 335, 3400, 3600, 4000, 4100, 4410, 4600, 532. Replaces F2NN3105AA. The wheel bearing kit used for this spindle is part number WBKFD7. (Item #: 104538, Ref: C5NN3105F) $270.00

Spindle, Right Hand - If you are using 10.00 x 16 inch tires on your Ford Tractor, this may be the right hand spindle you need. The measurements are A - 10.687 inches, B - 1.498 inches, C - 1.748 inches, D - 1.797 inches, E - 1.125\ inches. This spindle uses C0NN3A299A Thrust Bearing, C5NN3109A Upper Bushing, C5NN3110A Lower Bushing, -WBKFD7 Wheel Bearing Kit and 313020 Front Wheel Hub, 6 Bolt. Used on some of the following models: 3600, 4100, 4600, 5000, 5100, 5600, 6600, 7000, 7100, 7600. (Item #: 100638, Ref: D2NN3105C) $281.00

Steering Arm - This is a Left Hand Steering Arm used on Ford 4600 with Power Steering. It has a 1.464 Inch Diameter Spindle Shaft Opening. Replaces original part number D4NN3131C (Item #: 104734, Ref: D4NN3131C) $113.98

Steering Column Grommet - For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2-7/8 inch outside diameter X 1-1/4 inch inside diameter. (Item #: 126705, Ref: D2NN3A566B) $3.90

No
Picture
Steering Cylinder Rod - For Ford tractor models 2000, 3000, 3600, 4600, Compatible with Ford Construction and industrial models 230A, 231, 234, 335, 531, Replaces Ford OEM number E2NN3A540RDCTD, Diameter: .5", (Item #: 176492) $92.35

Steering Rocker Shaft Oil Seal - Oil Seal, Inner for Rocker Shaft. For tractor models 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, Major, Super Major. (Item #: 161601, Ref: DDN3539) $8.50

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Steering Shaft Bearing - Bearing is for the upper and lower ends of the steering shaft. Verify measurements of .49 inches wide, 2.04 inches outside diameter and 1.18 inches inside diameter. For tractor models Major, Power Major, Super major. Replaces 353075S. (Item #: 169746, Ref: E1ADKN3556) $9.90

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with manual and power steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.10

Steering Shaft Bushing - For Ford tractor models 2310, 2600, 2610, 2910, 3000, 3230, 3430, 3500, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4330, 4340, 4400, 4500, 4600, 4610, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 233, 234, 333, 334, 335, 420, 515, 535, Replaces Ford OEM number E1ADKN3558, (Item #: 161602) $4.70

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.90

Steering Wheel - This Steering wheel is 15 inch diameter with a 36 spline center hub. PVC grained cover material with covered spokes. For tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010, Industrials: 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 545A, 555B. Replaces OEM number D2NN3600A, D7NN3600A. (Item #: 101427, Ref: D7NN3600A) $53.00

Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 splined hub. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Item #: 101425, Ref: D6NN3600B) $33.00

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $5.70

Steering Wheel Nut - Steering Wheel Retaining Nut. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 7000, 7600. 11/16 inch - 20 NF thread. Replaces 356130S8, 83906211, C5NN3N602A, D5NN3N602A. (Item #: 101426, Ref: D5NN3N602A) $6.20

Tapered Roller Bearing - For Ford tractor models 4600, 4610 Replaces Ford OEM number 83930332, 905845R91, , Compatible with Landini tractor models 5500, 6500, 7500 Replaces Landini OEM number 1442550X1, , Compatible with Long tractor models 350 (DT), 445 (DT), 550 (DT), Replaces Long OEM number TX51030, Replaces Bearing number 32305, Inside Diameter: 25 mm, Outside Diameter: 62 mm, Width: 25.25 mm, (Item #: 180596) $20.98

Tie Rod - Tie Rod is 1.187 diameter rod, left hand, straight, drilled, 8 holes, 31 inches to center of post. For 4600, 532, 5610, 5700, 6610, 6700, 6710, 7410, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 3600. Replaces 83906922, 83929292, E1NN3280AA (Item #: 100688, Ref: E1NN3280AA) $48.40

Tie Rod End - This Tie Rod End is used on Carraro MFWD front ends. It measures 3.75 inches from the center of the ball joint to the end of the shaft. It has M22 x 1.5 Right Hand Thread. Replaces K965270, CAR98854, 98854, 48084970, 83930053, 80691 (Item #: 104470) $38.50

Tie Rod End - For Ford tractor models 4600, 4600SU, 4610, Compatible with Ford Construction and industrial models 250C, 260C, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 655, 655A, 655C, 655D, 675D Replaces Ford OEM number CAR87031, 83930617, , Compatible with Massey Ferguson Construction and industrial models 25 (with Carraro 4WD), 40E (with Carraro 4WD), 50E (with Carraro 4WD), 50H (with Carraro 4WD), 50H, 50HX (with Carraro 4WD), 50HX, 60H (with Carraro 4WD), 60H, 6500H (with Carraro 4WD), 6800H (with Carraro 4WD), Replaces Massey Ferguson OEM number 3475543M91, Replaces Carraro manufacturer number 87031, 4.250", M24 X 1.5 RH Thread, For left hand use Item #: 105037, (Item #: 128330) $59.00

Tie Rod End - Left Hand - This Tie Rod End is used on Carraro MFWD front ends. It measures 3.75 inches from the center of the ball joint to the end of the shaft. It has M22 x 1.5 Left Hand Thread. 83930054, CAR98855, K965269, 48084969, 80694, 98855 (Item #: 104471) $85.00

No
Picture
Tie Rod End, Carraro - Left Hand - For Ford tractor models 4600, 4600SU, 4610, Compatible with Ford Construction and industrial models 250C, 260C, 345, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655A, 655C, 655D, 675, 675D (all with FWD), Replaces Ford OEM number 83930620, CAR87031, 83930617, CAR88759, Replaces Carraro manufacturer number 87031, 88759, Fits Left Hand Side, Length 4.160", M24 x 1.5 Left Hand Thread, Manufactured by Carraro to exact OEM specifications, For an economy version use Item #: 104703, (Item #: 159935) $115.00

Tie Rod End, Economy - Left Hand - For Ford tractor models 4600, 4600SU, 4610, Compatible with Ford Construction and industrial models 250C, 260C, 345, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655A, 655C, 655D, 675, 675D (all with FWD), Replaces Ford OEM number 83930620, CAR87031, 83930617, CAR41447, CAR88759, Replaces Carraro manufacturer number 88759, 87031, Fits Left Hand Side, Length 4.160", M24 x 1.5 Left Hand Thread, For Carraro Version use Item #: 159935, (Item #: 104703) $41.90

Tie Rod Outer - Tie Rod End, left hand, 19.00 inches by 3/4 inch diameter, for manual or power steering equipped tractors. Left hand and right hand 1965 to 5/1967; Left hand only 6 of 1967 to 1975. Tie Rod End for diesel and gas applications. For 4000, 4600, 4610. (Item #: 100677, Ref: C5NN3278A) $22.50

Tie Rod Outer - End, right hand outer, female, .750 inch-16 thread, 3.75 inch to center of post, for tie rod with manual or power steering. For 3430, 3930, 4000, 4000 US Built, 4100, 4130, 4600, 4610, 4630, 4830, 5030. Replaces C5NN3289C, 81815989, 1815989 (Item #: 100676, Ref: C5NN3289C) $19.30

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Universal Joint - Used between the two halves of an axle assembly on Carraro MFWD front ends, this universal joint has 27mm cup diameter and is 74.60mm across. Replaces OEM numbers 107625, 83930383, CAR107625, 84355315, 21.00.00, K262161 (Item #: 156164, Ref: CAR107625) $27.98

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 4600 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy