FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 550 Parts

Category: Steering

[Categories] [All 550 Parts] [All Ford Models]

Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751) $92.58

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $19.30

Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651) $79.00

No
Picture
Front Axle Bearing - For tractor models 250C, 260C, 340A, 340B, 345C, 345D, 3500, 3550, 4400, 445, 445A, 4500, 455, 515, 535, 545, 550, 555, 555A, 555B, 655, 655A, 5400. (Item #: 128504, Ref: C7NN3123A) $18.50

Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref: CAR115715) $8.70

Front Axle Thrust Washer - Used in some Carraro Mechanical Four Wheel Drive front axles, this part replaces CAR115776, 47109296, CAR123478, 83944351, 9967994, K395022 (Item #: 156133, Ref: CAR115776) $23.90

Power Steering Cylinder - This Power Steering Cylinder is used on 3910V, 4110V, 445 Indust/Const, 4610V, 550 Indust/Const, 555 Indust/Const, 5550 Indust/Const, 555A Indust/Const, 555B Indust/Const, 655 Indust/Const, 655A Indust/Const, 7500 Indust/Const, 755B Indust/Const. It has a 3/4 inch rod. It is used both left and right side. Replaces original part numbers 86516202, E6NN3A540CA, E3NN3A540AA (Item #: 158214, Ref: E6NN3A540CA) $533.94

Power Steering Cylinder End - This end is 2.370 inches long, has a 1.000 inch threaded shaft with 0.687 inch diameter and 18 right hand threads. Replaces D9NN3A302AA, E3NN3A302AA, C5NN3A302D, 83958351, 83936699, 83918929, 83901713. (Item #: 104713, Ref: D9NN3A302AB) $25.08

Power Steering Cylinder End - This Steering Cylinder end is 2 inches from the center of the ball joint to the end of the threaded rod. The shaft is 0.687 inch-18 right hand thread. Used on 445, 550, 555, 5550, 555A, 555B, 655, 655A, 7500, 755B. Replaces 83901714, 83918928, 83936901, 83958352, C5NN3A303A, D9NN3A303AA, E3NN3A303AA. VERIFY OEM PART NUMBER TO ENSURE CORRECT FIT. (Item #: 104709, Ref: D9NN3A303AB) $23.20

Power Steering Cylinder Seal Kit - Used to repair original equipment cylinders on Ford/ New Holland models: 4200, 550, 5500, 555, 555A, 555B, 6500, 655, 655A, 7500. (Item #: 158418, Ref: C5NN3N713A) $34.50

Power Steering Pump - For tractor models 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A. Replaces D8NN3K514DC, E6NN3K514GA, E7NN3K514CA-E (Item #: 157714, Ref: E7NN3K514CA) $314.30

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.20

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Seal, Spindle Pin - For tractor models 1801, 250C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 3550, 4000, 4040, 4140, 420, 4400, 445, 445A, 445C, 450, 4500, 455, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6610O, 6810, 7010, 4610O, 8010, TT55, TT75. (Item #: 128511, Ref: TDBA3125A) $2.90

Spindle Kit, Complete - Spindle repair kit less spindle with unfinished bushings Contains (2) TDBA3110A bushings (Unfinished), (2) 87414 grease fittings, (1) D8NN3115BA 1.13 inch diameter pin, (1) C7NN3123A thrust bearing, (2) TDBA3125A seals, (1) 81T3122 spindle pin locking pin, (1) 81547 lock washer and (1) 50456 nut. Replaces DEPN3115A. (Item #: 125389, Ref: S.75082) $109.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $40.00

Steering Motor Seal Kit - This Steering Motor Seal Kit has a 1.776 inch seal. It is used on Ford / New Holland models 5110, 5610, 5900, 6410, 6610, 7610, 7710, 7810, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35, 445C, 445D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655C, 655D, 675D. Replaces 83945793, F1NN3N991AA, E3NN3R513BA, E3NN3N991BA, 81871236, 86585241 (Item #: 178956, Ref: F1NN3N991AA) $175.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Item #: 124494, Ref: 8N3586) $2.10

No
Picture
Tie Rod Assembly - For Ford Construction and industrial models 455 (07/1987 - later), 550, 555, 655, Replaces Ford OEM number E6NN3280AA, Dimension A: 54.060", Dimension B: 1.440", Additional Handling and Oversize Fees Apply To This Item, (Item #: 104704) $197.00

Tie Rod End - Left Hand - For Ford Construction and industrial models 455 (07/1987 - later), 550, 555, 655, Replaces Ford OEM number E6NN3290AA, Fits Left Hand Side, Dimension A: 4.250", Dimension B: 1.000"-16 UN 2A Left Hand Thread, (Item #: 104705) $38.40

Tie Rod End - Right Hand - Used on Ford models: 455 (07/1987 - later), 550 (4/1987-10/1988), 555 (4/1987-10/1988), 555A (4/1987-10/1988), 555B (4/1987-10/1988), 655A (4/1987-10/1988) Center to End Length: 4.250 inches. Spindle Height: 1.00 inch, 16 UN RH Thread. Replaces E6NN3289AA (Item #: 104706) $43.90

Tie Rod End, Carraro - Right Hand - For Ford Construction and industrial models 250C, 260C, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D (All with FWD), Replaces Ford OEM number 83930617, CAR87031, Length 4.160", 24 x 1.5 RH MM Thread, Right Hand Tie Rod End, Manufactured by Carraro to exact OEM specifications, For an economy version use Item #: 104702, (Item #: 159941) $92.00

Tie Rod End, Economy - Right Hand - For Ford Construction and industrial models 250C, 260C, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D (All with FWD), Replaces Ford OEM number 83930617, CAR87031, Length 4.160", 24 x 1.5 RH MM Thread, Right Hand Tie Rod End, For Carraro Version use Item #: 159941, (Item #: 104702) $37.70

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 550 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy