FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 7000 Parts

Category: Steering

[Categories] [All 7000 Parts] [All Ford Models]

Axle Knee, Left Hand - This is a Left Hand Axle Knee used on Ford 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610. It replaces original part number C5NN3007A (Item #: 169481, Ref: C5NN3007A) $273.00

Axle Knee, Right Hand - This is a Right Hand Axle Knee used on Ford 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610. It replaces original part number C5NN3006A (Item #: 192769, Ref: C5NN3006A) $345.65

Axle Pivot Pin, Front - For Ford tractor models 3600 (1/75-12/81), 4100 (1/75-12/81), 4600 (1/75-12/81), 5200 ('67-later), 6600 ('75-9/76), 7000 ('67-later), 7200 ('67-later), 7600 ('75-9/76), Replaces New Holland OEM number C5NN3N159C, Front Axle Pivot Pin, (Item #: 170380) $92.00

Axle Spacer - For tractor models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Item #: 182791, Ref: C5NN3N030G) $5.10

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $19.30

Ball Bearing, Steering Gear - Used with E1ADKN3556 Ball Race. 14 used for main nut, 10 used in upper shaft bearing, 10 used in lower shaft bearing. For tractor models Major, Super Major, 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Replaces 353075S. (Item #: 167684, Ref: 83424343) $0.50

Bushing - Bushing, 1.375 long. For Power Steering Center Arm Pivot Shaft, Upper Bushing. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 153967, Ref: C5NN3179B) $3.80

Center Arm - Center Arm, for Power Steering Pivot Shaft. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 100667, Ref: D6NN3N670A) $84.00

Drag Link - Drag Link for power steering, 50.50 inch center post to center post. For 5000, 5600, 6600, 7000, 7600. Replaces C7NN3304B, E0NN3308CA, 81822052, 83925158. (Item #: 100689, Ref: E0NN3304CA) $62.00

Drag Link Assembly - Front - For Ford tractor models 5000, 5100, 5340, 7000, 7100, Replaces Ford OEM number C5NN3304U, Length 51.250", Diameter 1.250", Additional Handling and Oversize Fees Apply To This Item, (Item #: 104614) $139.00

Drag Link End - Front - For Ford tractor models 5000, 5100, 5600, 5610, 6410, 6600, 6610 (81 with manual steering), 7000 (68 - 75), 7100 (with manual steering), 7600 (75 - 81 with manual steering), Replaces Ford OEM number C7NN3A300A, 81825395, 877554825, C5NN3A300D, Front Drag Link End, Length 7.875", Diameter .935", (Item #: 104617) $31.00

Drag Link End - Rear - For Ford tractor models 5000 (65-75 replacement thread style link used 65-12/67), 5100 (with manual steering), 5600 (71-81 with manual steering), 5610 (81 with manual steering), 6410 (with manual steering), 6600 (71-81 with manual steering), 6610 (81 with manual steering), 7000 (65-75 replacement thread style link used 65-12/67), 7100 (with manual steering), 7600 (71-81 with manual steering), Replaces Ford OEM number C7NN3304C, C5NN3304T, Length 47.500" long from center of ball joint to end, (Item #: 104615) $133.00

Drag Link End - Rear - For Ford tractor models 5000, 5100, 7000 (All 65-12/67 with manual steering for Original Style), Replaces Ford OEM number C5NN3307E, Rear Drag Link End, Length 5.031", Diameter 1.000", 16 Right Hand Thread, (Item #: 104618) $17.98

Drag Link End - Rear - For Ford tractor models 5000 (68-75 and 65-12/67 when replacing non thread link), 5100 (with manual steering), 5600 (75-81 with manual steering), 5610 (81 with manual steering), 6410 (with manual steering), 6610 (81 with manual steering), 7000 (68-75 and 65-12/67 when replacing non thread link), 7100 (with manual steering), 7600 (75-81 with manual steering), 7610 (with manual steering), Replaces Ford OEM number C5NN3307N, C7NN3307B, Rear Drag Link End, Length 47.500", (Item #: 104619) $95.00

Drop Arm - For Ford tractor models 5000, 5600, 5610, 5900, 6600, 6610, 7000, 7600, 7610, Replaces Ford OEM number C7NN3590B, 81822063, (Item #: 154911) $57.98

Drop Arm, Used - For Ford tractor models 5000, 5600, 5610, 5900, 6600, 6610, 7000, 7600, 7610, Replaces Ford OEM number C7NN3590B, 81822063, For a new version of this item use Item #: 154911, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454911) $80.01

Front Axle Bushing - This Front Axle Pin Bushing is used on 5000, 5100, 7000, 7100, 5600, 6600, 7600, 5610, 6610, 7610, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 3500, 4400. It has a 2.132 inch outside diameter, a 1.893 inch inside diameter and is 2 inches long. It replaces original part number C5NN3153A (Item #: 111728, Ref: C5NN3153A) $5.90

Front Axle Pin, Front - Front Axle Pin, Manual or Power Steering. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 162989, Ref: C5NN3N159A) $34.90

Front Axle Pin, Rear - 1.250 inch outside diameter, 5.150 inches long, Manual or Power Steering. For tractor models 3550, 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3N160A, 81802839, 81802839GV, E6NN3N160AA (Item #: 128484, Ref: C5NN3N160A) $28.80

Front Axle Support - For models: (5000 from 9/1970 and up), 7000, 5600, 5900, 6600, 7600, 5610, 6610, 7610. Steering Shaft Bushings (C5NN3179B and C5NN3179A) not included. Replaces Part Numbers E5NN3029BA D0NN3029A. (Item #: 153934, Ref: E5NN3029BA) $960.00

Front Socket - End, front, 1.00 inch-16, left hand threads, 3.75 inch to center of post, for original style drag link with threaded ends and manual steering. For 5000, 7000. (Item #: 104616, Ref: C5NN3308C) $25.00

Front Socket - End, front, 1.00 inch-16, left hand threads for drag link with power steering, 3.75 inch to center of post. For tractor models 5000, 7000. (Item #: 104624, Ref: E3NN3308BA) $24.90

No
Picture
Hydraulic Lift Cylinder Piston Ring - For Ford tractor models 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700, Replaces Ford OEM number D1NN473B, Piston Diameter: 3.75", (Item #: 176453) $5.10

No
Picture
O-Ring and Plug Assembly - For Ford tractor models TW10, TW20, TW30, 5000, 5200, 5700, 6700, 7000, 7200, 7700, 8000, 8400, 8600, 8700, 9000, 9600, 9700, Replaces Ford OEM number D1NN3R684A, 036147A1, (Item #: 126955) $2.98

Power Steering Control Valve Housing - This Power Steering Control Valve Housing is used on Ford Models: 5000, 7000, 5600, 6600, 7600. It replaces original part number C9NN3C516B (Item #: 180253, Ref: C9NN3C516B) $133.51

Power Steering Cylinder Seal Kit - This Power Steering Cylinder Seal Kit is used on C5NN3N500C and C5NN3N500D cylnders. It contains: 86629540, C5NN3N509A, C5NN3B543A, 2 - 87149S94, C5NN3N548A, 87037S94 (C5NN3N558A), C5NN3N574A, 511836, 9849109 (Item #: 169538, Ref: CFPN3301C) $51.00

Power Steering Hose Assembly - Flexible Power Steering Hose designed to replace rigid Ford tube assemblies. 54 inches long, 3/8 inch inside diameter. SAE 100 R1A single wire braid hose with 5/8 inch-18 thread, straight SAE flare female swivel on one end, 5/8 inch-18 thread SAE straight inverted flare on other. For tractor models 2000, 2600, 3000, 3500, 3600, 4000, 4600, 5000, 5600, 6600, 7000, 7600. Can replace tube assemblies C5NN3A562C, C7NN3A562C, C5NN3A541A, C7NN3A541A, C7NN3A541B, D0NN3A562A. (Item #: 178207, Ref: FPH54) $57.00

No
Picture
Power Steering Hydraulic Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number D7NN3A674B, E6NN3K514DA, 83959532, Front inlet hole size: 9/16" UNF, Front outlet hole size: 5/8" UNF, Inner maximum liters per minute: 12.5, Inner maximum gallon per minute: 2.75, Top hole spacing: 107, (Item #: 170931) $522.48

Power Steering O-Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655C, 655D, 675, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number D2NN3D587A, D7NN3D587A, (Item #: 154787) $0.50

Power Steering Pump - For tractor models 2000, 2100, 2110, 3000, 3100, 4000, 4100, 4110, 4500, 5000, 5100, 5200, 535, 7000, 7100, 7200. Output capacity is 1250 PSI, 4.2 gallons at 1000 RPM. Also replaces 81816585. (Item #: 114294, Ref: C7NN3A674F) $401.00

Power Steering Pump - For (2000, 3000, 4000, 4500, 5000 all 1965-1974) (3055, 4140 all 1970-1974) (3150 1970- 11/1975) (3500 1965-1971) (7000 10/1971-1974). Power Steering Pump. (Item #: 157724, Ref: D8NN3K514KC) $868.00

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $182.80

Power Steering Pump - C7NN3A674G - For Ford tractor models 4000 (1/65-12/74), 4200 (1/65-12/74), 5000 (1/65-1/75), 5200 (1/67-12/74), 7000 (10/71-12/74), 7200 (10/71-12/74), Replaces Ford OEM number C7NN3A674G, C5NN3A674G, 81851286, 3.5 GPM, 1100 PSI at 1000 RPM, Used in systems with separate reservoir, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157697) $600.00

Power Steering Pump - E6NN3K514CA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (R (1/75-12/81), 2600 (N (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3600 (R (1/75-12/77), 3600 (1/75-12/81), 3600 (N (1/75-12/81), 3600 (NO, V (1/75-12/81), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600 (NO (10/75-12/81), 4600SU (1/75-7/78), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5600, 5700, 6600, 6600 (O), 6600, 6700, 7000, 7100, 7200, 7600, 7600, 7700, For Ford Construction and industrial models 231, 233, 333, 335, 420, 515, 531, 532, Replaces Ford OEM number E6NN3K514CA, 83959550, 850 PSI at 1000 RPM, 2.74 GPM, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157811) $307.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9/1968), (8000, 8600, 9000, 9600 1/1968-2/1973), (Industrials 3400, 3500, 4400, 4500 1965-4/1970). NOTE: This kit is for pumps that used 2 - single lip seals. If your pump uses one double lip seal, use kit 83910651. (Item #: 113930, Ref: DHPN3A674B) $12.10

Power Steering Pump Repair Kit - This Seal and O-Ring Kit is for Power Steering Pumps with External Reservoirs. Fits; (2000, 3000, 4000 and 5000 1/1965-9/1968), (7000, 8000, 8600, 9000, 9600 1/1968-2/1973), Industrial; (3400, 3500, 4400, 4500 1/1965-4/1970), (2110LCG, 4110LCG 1965-9/1968). Contains: (2) D2NN3R542A O-Ring, (2) D2NN3R543A O-Ring, (2) E0NN3N529AA Seal, (1) E1ADKN994567 Seal, (2) 9861410 O-Ring, (1) 134373 O-Ring, (1) 9991976 O-Ring, (1) 379275S94 O-Ring, (1) 9617873 O-Ring. Replaces OEM part number DHPN3A674A. (Item #: 168490, Ref: DHPN3A674A) $56.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.20

Power Steering Seal Kit - Orbital Control Valve and Gear Box Gasket and Seal Kit. For tractor models (4000, 5000 from 7/1970 and up), 4600, 5600. 5610, 6600, 6610, 7000, 7600, 7610. NOTE If you are working on a 5600, 6600, 7600, 5610, 6610 or 7610 you will also need three E0NN3A590AA Teflon seals, sold seperately. Replaces EGPN3N503AA, C9NN3R668A, E1NN3N632AA, C9NN3N598A, C9NN3R669A, C9NN3C615A, 81803034. (Item #: 164631, Ref: EDPN3500A) $15.50

Power Steering Seal Kit - This Power Steering Seal Kit is used on steering gear assemblies. It contains (1) C9NN3747A, (1) C9NN3E614A, (2) C9NN3A590A, (2) C9NN3D624B, (1) E1NN3N632AA. Replaces EGPN3N503AA, 83957121 (Item #: 168433, Ref: EGPN3N503AA) $8.70

Power Steering Seal Kit - For Ford tractor models 4000, 4100, 5000, 5100, 7000, 7100, Replaces Ford OEM number EDPN3500A, 83936975, (Item #: 158421) $15.80

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Sector Shaft Oil Seal - Oil Seal, inner for Pitman Arm Sector Shaft. Used on 5000, 7000 (1965-1975), 5600, 6600, 7600 (1975-1981), 5610, 6610 (1981 and UP), POWER STEERING 5000, 7000 (1965-7/1970). Measures 2.000 Inches Outside Diameter, 1.500 Inches Inside Diameter and 0.250 Inches Wide. Wide. Replaces 81803190, C5NN3C615B (Item #: 161888, Ref: C5NN3C615B) $7.90

Shaft - Pivot Shaft for Center Power Steering Arm, 4.28 inches long. For tractor models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 152060, Ref: C5NN3N703C) $28.00

Spindle Bushing, Bearing and Seal Kit - This Spindle Bushing, Bearing and Seal Kit contains: 2 - C5NN3109A (1 5/8 inch X 2 inch X 1 7/8 inch) Bushings, 2 - C5NN3110A (1 3/4 inch X 2 inch X 1 7/8 inch) Bushings, 2 C0NN3A299A (2 inch ID X 2 7/8 inch OD) Thrust Bearings, 2 - C0NN3A208A (1 1/2 inch X 2 inch X 1/4 inch) Dust Seals. Used on Ford New Holland 5000, 5100, 5110, 5200, 5600, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610 (Item #: 104568, Ref: SBBSKIT05) $34.20

Spindle Bushing, Lower - This Lower Spindle Bushing is measures 2.004 inch outside diameter, 1.760 inch inside diameter, wall thickness .119 inch, 1.860 inch long. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802797, C5NN3110A (Item #: 100641, Ref: C5NN3110A) $4.50

Spindle Bushing, Upper - This Upper Spindle Bushing measures 2 inch outside diameter, 1.645 inch inside diameter, 1.856 inch long, and wall thickness .176 inches. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802792, C5NN3109A (Item #: 100640, Ref: C5NN3109A) $5.30

Spindle Left Hand - If you are using 10.00 x 16 inch tires on your Ford Tractor, this may be the left hand spindle you need. The measurements are A - 10.687 inches, B - 1.498 inches, C - 1.748 inches, D - 1.797 inches, E - 1.125\ inches. This spindle uses C0NN3A299A Thrust Bearing, C5NN3109A Upper Bushing, C5NN3110A Lower Bushing, -WBKFD7 Wheel Bearing Kit and 313020 Front Wheel Hub, 6 Bolt. Used on some of the following models: 3600, 4100, 4600, 5000, 5100, 5600, 6600, 7000, 7100, 7600. (Item #: 100639, Ref: D2NN3106C) $319.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.40

Spindle, High Clearance - LH - For Ford tractor models 5100 (1/1968-later), 5200, 5340 (1/1968-later), 5600 (1/1975-10/31/75), 6600 (1/1975-10/31/75), 7000 (10/1971-12/74), 7100 (1/1968-later), 7200, 7600 (1/1975-10/31/75), Replaces Ford OEM number C5NN3106K, Length: 16", Diameter: 1.75", Stem Diameter: 1.625", Stem Diameter: .843", Fits Left Hand Side, (Item #: 161169) $269.98

Spindle, High Clearance - RH - For Ford tractor models 5100 (1/1968-later), 5200, 5340 (1/1968-later), 5600 (1/1975-10/31/75), 6600 (1/1975-10/31/75), 7000 (10/1971-12/74), 7100 (1/1968-later), 7200, 7600 (1/1975-10/31/75), Replaces Ford OEM number C5NN3105N, Length: 16", Diameter: 1.75", Stem Diameter; 1.625", Stem Diameter: 0.843", Fits Right hand side, (Item #: 160192) $597.00

Spindle, LH - This spindle is used on tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses Bushing Kit SBK6581. Uses front wheel hub part number C9NN1104D. Also uses wheel bearing kit part number WBKFD6. (Item #: 100643, Ref: C5NN3106J) $87.00

Spindle, RH - This spindle is for tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses Bushing Kit SBK6581. Uses front wheel hub part number C9NN1104D. Also uses wheel bearing kit part number WBKFD6. (Item #: 100642, Ref: C5NN3105M) $89.00

Spindle, Right Hand - If you are using 10.00 x 16 inch tires on your Ford Tractor, this may be the right hand spindle you need. The measurements are A - 10.687 inches, B - 1.498 inches, C - 1.748 inches, D - 1.797 inches, E - 1.125\ inches. This spindle uses C0NN3A299A Thrust Bearing, C5NN3109A Upper Bushing, C5NN3110A Lower Bushing, -WBKFD7 Wheel Bearing Kit and 313020 Front Wheel Hub, 6 Bolt. Used on some of the following models: 3600, 4100, 4600, 5000, 5100, 5600, 6600, 7000, 7100, 7600. (Item #: 100638, Ref: D2NN3105C) $281.00

Steering Arm - Left Hand - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3131A, All Models With Power Steering, Left Side, Tie Rod attaches from bottom of steering arm, (Item #: 100665) $69.30

Steering Arm - Left Hand, Used - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3131A, All Models With Power Steering, Left Side, Tie Rod attaches from bottom of steering arm, For a new version of this item use Item #: 100665, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410665) $35.01

Steering Arm - Right Hand - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3130A, With Power Steering, Right Side, Tie Rod attaches from bottom of steering arm, (Item #: 100666) $71.44

Steering Arm - Right Hand, Used - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3130A, With Power Steering, Tie Rod attaches from bottom of steering arm, Right Hand, For a new version of this item use Item #: 100666, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410666) $44.01

Steering Arm Dust Seal - This Steering Arm Dust Seal fits between the Steering Arm and the Spindle. It measures 1 7/8 Inches (48mm) Outside Diameter, 1 1/2 Inches (38mm) Inside Diameter, 1/4 Inches (6mm) Thick. Replaces 81802845, C0NN3A208A (Item #: 104573, Ref: C0NN3A208A) $4.00

Steering Arm Right Hand - For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7700. Right Hand Steering Arm used with D2NN3105C, C5NN3105M, C7NN3105D. (Item #: 104736, Ref: C5NN3130J) $62.00

Steering Arm, Left Hand - This Left Hand Steering Arm is used on Ford / New Holland Tractors: 5000, 5100, 5340, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600. Replaces C5NN3131B, C5NN3131J, 81813163 (Item #: 104737, Ref: C5NN3131B) $194.00

Steering Column Grommet - For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2-7/8 inch outside diameter X 1-1/4 inch inside diameter. (Item #: 126705, Ref: D2NN3A566B) $3.90

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Item #: 124494, Ref: 8N3586) $2.10

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with manual and power steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.10

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.90

Steering Shaft and Nut Assembly - Left Hand Spiral. For models: 5000, 5100, 7000 and 7100, 1965 to 8/1970 with power steering. Power steering cylinder in front support. This shaft is approximately 28 13/16 inches long. It replaces C5NN3A710A. (Item #: 114038, Ref: C5NN3A710A) $150.00

Steering Shaft with Nut - This Steering Shaft for manual steering is 28.750 inches long. It has right hand spiral. Turning the steering wheel clockwise causes the worm nut to travel up the shaft. It replaces original part numbers C5NN3A710B, D2NN3A710A and 81842811. If you need steering wheel nut order D5NN3N602A also. (Item #: 114039, Ref: D2NN3A710A) $73.00

Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 splined hub. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Item #: 101425, Ref: D6NN3600B) $33.00

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $5.70

Steering Wheel Nut - Steering Wheel Retaining Nut. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 7000, 7600. 11/16 inch - 20 NF thread. Replaces 356130S8, 83906211, C5NN3N602A, D5NN3N602A. (Item #: 101426, Ref: D5NN3N602A) $6.20

Steering center arm pivot shaft bushing - Bushing, 1 inch long, for power steering center arm pivot shaft. Tractors 5000, 7000, 2 used from 1965 to 1/1966. Upper bushing for center arm pivot shaft, 1 used on tractors 5000, 7000 (2/1966-1975); 5600, 6600, 7600 (1975-1981); 5610, 6610, 7610 (1981-3/1985). (Item #: 153962, Ref: C5NN3179A) $4.30

Tie Rod Clamp - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 (All 01/65 - later), Replaces Ford OEM number C5NN3287C, 81816724, (Item #: 104623) $8.60

Tie Rod End - End, Tie Rod, left hand outer, 17.500 inches to center of post and .940 inch diameter. For tractor models: 5000, 5600, 5610, 660, 6610, 7000, 7600. (Item #: 104621, Ref: C7NN3280F) $36.10

Tie Rod End - End, Tie Rod, right hand outer, female end 0.937 inch 16 right hand threads, 4.250 inches to center of post. For tractor models: 5000, 5600, 5610, 6600, 6610, 7000, 7600. (Item #: 104622, Ref: C7NN3289E) $34.41

Tie Rod End - For Ford tractor models 4400, 4410, 5000, 5100, 5200, 5600, 5610, 6000, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number E3NN3307AA, C5NN3307F, 3.812" Long, 1" Diameter, 16 Right Hand Thread, (Item #: 100687) $19.10

Tie Rod Inner - End, right hand inner, 1.00 inch-16 thread. For tie rod with power steering, 3.75 inch to center of post. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610, 8000, 8200, 8600, 9000, 9200, 9600. (Item #: 100682, Ref: C7NN3289D) $14.80

Tie Rod Inner - End, left hand inner, for tie rod with power steering, 18.125 inches to center of post. For tractor models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces 81822048, D6NN3B161A. (Item #: 100681, Ref: C7NN3B161A) $22.50

Tie Rod Outer - End, right hand outer, 15.375 inch to center of post, .937 inch diameter. For Tie Rod with Power Steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3280E, 1802851, 81802851, 81822049, 1822049, 81859488, C5NN3208B, C5NN3280C. (Item #: 100680, Ref: C7NN3280E) $23.70

Tie Rod Outer - End, left hand outer, 15.375 inches to center of post. Rod diameter is 0.937 inches. For Tie Rod with Power Steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3281B, C5NN3281B, 81822050, 1822050. (Item #: 100679, Ref: C7NN3281A) $28.60

Tie Rod Tube - This is a Right Hand Tie Rod Tube used on 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610 (1981-3/1985). 16 inches. Replaces 86547157, C7NN3B624B. (Item #: 153561, Ref: C7NN3B624B) $37.80

Tie Rod Tube - This Tie Rod Tube measures 19.15 inches. If a 16 inch tube is needed, order part number C7NN3B624B. Replaces 86547157, C5NN3B624B. (Item #: 104613) $127.00

Tie Rod, Outer, LH - Used on the outer left side of manual steering models 5000, 5100, 5340, 7000, 7100, 7200 all from 1965-1967 with manual steering. This part measures 17.500 inches from the center of the ball joint to the end of the shaft. The shaft diameter is 0.940 inches. Replace 81802856, C5NN3281C (Item #: 104620, Ref: C5NN3281C) $42.10

Tie Rod, Outer, rh - Used on the outer right side of manual steering models 5000, 5100, 5340, 7000, 7100, 7200 all from 1965-1967 with manual steering. This part measures 17.500 inches from the center of the ball joint to the end of the shaft. The shaft diameter is 0.940 inches. Replaces 81802851, C5NN3280F (Item #: 100678, Ref: C5NN3280F) $35.70

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 7000 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy