Axle Hardware Kit 4 PCS. - Bolt Kit, front axle bolt, nut and washer. Holds right and left axles to center axle. Bolts are 3 1/2 inches and 5/8x18. Nuts have 1 1/6 head. For tractors: 8N, 9N, 2N {1939-1952}. For 600, 700, 800, 900, NAA. (Item #: 178012, Ref: 350789-KIT)$16.90
Axle Pin Support Bushing - This Axle Pin Bushing for models 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, NAA, Jubilee. Front Axle Bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778 inch inside diameter, 1.913 inch outside diameter, 1.5 inch length (not for heavy, industrial or grove axles). (Item #: 110832, Ref: 2N3039)$7.90
Axle Washers 16 Per PKG - Flat washer kit, 5/8, rear wheels and front axle bolts. Set of 16. For tractors: {1939-1954}. 8N, 9N, 2N, NAA. (Item #: 178595, Ref: 351505K16)$13.10
Ball Bearing, Steering Gear - 3/8 inch ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee.22 required per gear box (Item #: 167684, Ref: 83424343)$0.50
Differential Pinion Bearing Cup - For Ford tractor models Dexta (1957-1964), NAA (1953-1954), 2N (1939-1952), 8N (1939-1952), 9N (1939-1952), 600 (With 4 Speed Transmission, s/n 54166-later, 1958-1962), 601 (With 4 Speed Transmission, s/n 54166-later, 1958-1962), 2000 (1965-later), 2120 (With 4 Speed Transmission, s/n 54166-later, 1958-1962), 3000 (1965-later), 4110 (1965-later), Compatible with Ford Construction and industrial models A64, Replaces Ford OEM number BB4422, 3920, (Item #: 109577)$18.30
Drag Link Assembly - This Tie Rod Assembly includes 8N3314D tube with both ends with clamps. Tube measures 32.75 inches. Overall measures 35 inches center to center when both ends adjusted in to stop, 9/16 inch by 18 pitch stud, includes Zerk fittings. For tractor models 8N, 9N, 2N. (Item #: 113709, Ref: 8N3314COMPLT)$76.00
Drag Link Assembly, LH OEM - This Drag Link Assembly is manufactured to look exactly like the original on an 8N before serial number 216989, left side. It adjusts from approximately 36 inches to 39-1/2 inches, center to center tie rod studs. It replaces 8N3270C, 8N3305A, 8N3314D, NAA33271A (Item #: 182954, Ref: 8N3305A)$110.00
Drag Link Assembly, LH OEM - This Drag Link Assembly is manufactured to look exactly like the original on an 8N after serial number 216988, left side. It adjusts from approximately 36 inches to 39-1/2 inches, center to center tie rod studs. (Item #: 182951, Ref: 8N3305B)$86.00
Drag Link Assembly, RH OEM - This Drag Link Assembly is manufactured to look exactly like the original on an 8N before serial number 216989 with early 4 bolt side sector steering gear box. Right side. It adjusts from approximately 36 inches to 39-1/2 inches, center to center tie rod studs. It Replaces: 8N3270C, 8N3304A, 8N33315, NAA33271A. (Item #: 182953, Ref: 8N3304A)$121.00
Drag Link Assembly, RH OEM - This Drag Link Assembly is manufactured to look exactly like the original on an 8N after serial number 216988, right side. It adjusts from approximately 36 inches to 39-1/2 inches, center to center tie rod studs. (Item #: 182952, Ref: 8N3304B)$108.00
Drag Link Clamp - This Drag Link Clamp is used on Ford tractor models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 and 1801, 1939-1964. It replaces 8N3287. (Item #: 184034, Ref: 8N3287)$6.30
Drag Link Clamp - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2100, 2110, 2120, 2130, 2131, 2300, 2310, 2600, 2610, 2910, 3000, 3100, 3110, 3120, 3300, 3310, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4131, 4140, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 530, 531, Replaces Ford OEM number 957E3287, 8N3287, (Item #: 104589)$5.40
Drag Link Dust Cover - Steering Drag Link Rear Ball Joint Cover. For tractors: 8N, 9N, 2N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5/8 inch hole, Large end is 1 7/16 inch inside diameter. (Item #: 178186, Ref: 9N3324)$12.30
Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models: Jubilee, NAA, NAB, 2000 4 cylinder, 2030, 2031, 2120, 2130, 2131, 2N, 4000 4 cylinder, 4030, 4031, 4120, 4121, 4130, 4131, 600, 601, 800, 801, 8N, 9N. All 4 cylinder 1939 to 1964. 1.425 inch base, .850 inches tall, .700 inch hole. Replaces: 9N3324, A0NN3324. (Item #: 178150, Ref: 9N3324OE)$17.20
Drag Link End, Front - This Drag Link End is exactly like the NAA3270A except it is sealed, meaning you never have to grease them! Sealed, A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Price shown is for each, sold only in multiples of 2 items. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Item #: 100671, Ref: NAA3270A-N)$10.60
Drag Link End, Front - A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Item #: 100671, Ref: NAA3270A)$10.60
Drag Link End, Greasable - Fits 8N 1948-1952. Used on front of drag link. Left hand threads. 3.375 inches long from center of post to end of large thread. Large thread diameter is .687 inches (11/16 inch). (Item #: 100669, Ref: 8N3270)$14.00
No Picture
Drag Link End, Non-Greasable - Sealed, fits 8N 1948-1952. Used on front of drag link. Left hand threads. 3.375 inches long from center of post to end of large thread. Large thread diameter is .687 inch (11/16 inch). (Item #: 100669, Ref: 8N3270-N)$14.00
Drag Link End, Rear - Length 4.250 inches, .687 inch diameter, 18 right hand thread. For tractor models: 8N, 9N, 2N, 2000 4 cylinder 1962-1964, 2031, 2120 1963-1964, 2131, 4000 1962-1963, 4031, 4120, 4131, 600, 601, 800, 801, NAA, NAB. (Item #: 100670, Ref: NAA33271A)$13.20
Drag Link Tube - 34.5 inches long. Uses one right hand (NAA33271A) and one left hand (NAA3270A) Tie Rod End. For tractor models 9N, 2N, (used on right hand side on early 8N and left hand side on late 8N), Dexta, Super Dexta. (**BEFORE ORDERING: Measure your drag link tube length, part number 8N33314D drag link tube was also used on 9N, 2N and 8N tractors. It is 32-3/4 inches long). (Item #: 114042, Ref: 8N33315)$56.00
Drag Link Tube - 32-3/4 inches long. Outside diameter 0.875 inch. Includes clamps (on each end), For 8N, 9N, 2N (For complete tie rod assembly add front drag link ends 8N3270 AND rear drag link ends NAA33271A. (**BEFORE ORDERING: Measure your drag link tube length. Part number 8N33315 drag link tube was also used on these tractors. It is 34-1/2 inches long). (Item #: 105276, Ref: 8N3314D)$54.00
Front Axle Assembly with Bushing - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000 (with Manual 7-57/PS 55), 4000 (with Manual 7-57/PS 55), Dexta, Super Dexta. This axle is for tractor models that have a standard front end (NOT for adjustable axle). Not warrantied for use with front end loaders. Replaces NAA3010B2. (Item #: 112019, Ref: D9NN3010EA)$192.00
Front Axle Spacer - This Front Axle Spacer is on the back of the front axle assembly. It measures 1.77 inches I.D. X 2.75 inches O.D. Used on 8N and NAA/Jubilee tractors, 1948-1954 (Item #: 182957, Ref: 8N3027)$2.60
Front Axle Support Pin Spacer - 1.783 inch inside diameter, 2.023 inch outside diameter, .758 inch length. For tractor models 8N, NAA, Jubilee (1948-1954). (Item #: 178040, Ref: 8N3024)$6.40
Pin, Front Axle - Outside diameter 1.743 inch, inside diameter 1.310 inch, length 4 inches. For tractor models 9N, 2N (serial number 164489 and up), 8N. Hardened steel. The part has a fully open end which will accommodate a loader pump shaft. If you need OEM style with smaller opening, order 2N3126E. (Item #: 112069, Ref: 2N3126D)$31.85
Pitman Arm (LH/RH) - Steering Gear Pitman Arm for tractor models 8N (serial number 216989 and up 1949-1952), NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. Replaces NCA3590A. Measures 10 inches in length. Big end is splined at 1.06 inside diameter. Small end is smooth at .688 inches. (Item #: 116149, Ref: 86542743)$85.00
Radius Rod Ball Spacer, Used - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 4000, 4030, 4100, 4110, 4120, 4121, 4130, 4131, 4410, 4600SU, 4610, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 531, 532, 540, 541, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4140, Replaces Ford OEM number E0NN3N442BA, For a new version of this item use Item #: 115083, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459476)$10.92
Radius Rod to Front Axle Pin - This model is for model 8N 1948-52. (Item #: 178162, Ref: 357623S8)$4.40
Radius Rod, Socket Cap - Used with Socket E0NN3N442BA. Replaces: E0NN3N406BA, 8N3440B, C7NN3N406A, 957E3440B, 83924040, 957E3440A, 313319. (Item #: 108088, Ref: E0NN3N406BA)$10.40
Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1. Used with optional Monroe seat (Item #: 109602, Ref: 72696R1)$2.30
Sector Bushing - Steering Gear Sector Bushing is 1 1/2 inches long. For tractors: 8N, 8NAN to serial number 216988 {1948-1949}. 4 required per tractor, sold individually. (Item #: 178187, Ref: 8N3576A)$14.50
Sector Bushing - Steering Gear Sector Bushing .84 inches long. For tractors: 8N, 8NAN, NAA, NAB serial number 216988 and up. 2 required per tractor, sold individually. (Item #: 124503, Ref: 8N3576B)$9.10
Sector Shaft Seal - This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Item #: 124153, Ref: C5NN3C615A)$4.70
Spindle / King Pin Repair Kit - For 8N, 9N, 2N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: upper spindle seal C5NN3125A, spindle top bushing 2N3109, spindle bottom bushing 2N3109, and thrust bearing C0NN3123B. (Item #: 180785, Ref: S.65986)$36.00
Spindle Bushing - FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Item #: 100617, Ref: 2N3109)$4.00
Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36)$1.10
Spindle Thrust Bearing - Thrust Bearing for Spindle measures 1.345 inch inside diameter, 2.2 inch outside diameter, and width of .622 inch. For tractor models 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Jubilee, Super Dexta. (Item #: 100623, Ref: C0NN3123B)$5.50
Spindle, Front - Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3/4 inches with notch on outside and 1/4 inch keyway on inside. Used with Steering Arm part number 310799, bushing part number 2N3109, wheel hub part number 86511582, thrust bearing part number C0NN3123B, wheel bearing kit part number CBPN1200A. (Item #: 100615, Ref: 8N3105B)$50.00
Spindle, Front - Left Hand Spindle. For 8N, NAA, Jubilee. REPLACES F3NN3106AA. Spindle shaft is 10 3/4 inches with notch on outside and 1/4 inch keyway on inside. Used with Steering Arm part number 310799, bushing part number 2N3109, wheel hub part number 86511582, thrust bearing part number C0NN3123B, wheel bearing kit part number CBPN1200A. (Item #: 100616, Ref: 8N3106B)$50.00
Steering Arm Dust Seal - For tractor models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Item #: 104572, Ref: 8N3528)$2.50
Steering Arm, Used - For Ford tractor models Dexta, NAA, 8N, 600, 700, 800, 900, 2100, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3300, 3310, 3330, 3600, 3610, 3900, 3910, 4000, 4100, 4610, Replaces Ford OEM number 957E3130, 310799, For a new version of this item use Item #: 104731, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444054)$23.46
No Picture
Steering Box Assembly, Remanufactured, 8N3548 - For Ford tractor model 8N (Late), Replaces Ford OEM number 8N3548, For a New version of this sku use Item #: 111099, (Item #: 204465)$910.01
Steering Box Side Cover Gasket - This is an Aluminum Gasket for Steering Box Side Cover used on Ford 8N prior to serial number 216989. (Item #: 183026, Ref: 8N3581A)$5.60
Steering Column Bearing Kit - Used on manual steering column. Kit contains column spring, seat and bearing. Replaces Ford OEM Numbers 8N3520, 8N3517, 8N3518, C5NN3N716A. (Item #: 118504)$42.00
Steering Column Bearing Spring - This Steering Column Bearing Spring is for tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Item #: 178087, Ref: 8N3520)$5.20
Steering Column Seal - This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). Replaces D8NN3N898AA, 83911611, 81803114 (Item #: 124493, Ref: 8N3570)$2.90
Steering Column Spring Seat - For Steering Column Bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Item #: 179692, Ref: 8N3518)$6.70
Steering Gear Assembly - Manual steering gear assembly fits late 8N [2 bolt - Sector Shaft Cover] (1949-52). NOTE: Can replace EARLY style Gear Box [4 bolt - Sector Shaft Cover] by swapping drag links side to side. Does not include arms. Order 86542743. (Item #: 111099, Ref: 8N3505B)$771.00
Steering Gear Pitman Arm, Used - For Ford tractor models NAA, 8N, 600, 700, 800, 900, 901, 2000, 4000 (all 1949 - 1964), Replaces Ford OEM number 86542743, NCA3590A, Left Hand or Right Hand, For a new version of this item use Item #: 116149, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 416149)$50.40
Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref: 8N3581B)$1.30
Steering Gear, Aftermarket Box - This Double Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Item #: 181987, Ref: S.67671)$128.57
Steering Gear, Aftermarket Box - This Single Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Item #: 184515, Ref: S.67670)$141.42
Steering Gear, Shaft - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Item #: 179431, Ref: S.67668)$154.01
Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For tractor models (8N 1950-1952), Jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. Replaces the following OEM numbers: 1023837M1, 180560M1, 180562X1, 1A6763A, 1A-6763-A, 1AS6822, 1AS-6822, 1E-6757-A, 1E6757A, 1E6764, 1E-6764, 1E6784, 1E-6784, 1L6774, 1L-6774, 1L6784, 1L-6784, 22-456X, 251294, 33544, 33545, 34690S, 34692S, 34813S, 353428X1, 353436X1, 353440X1, 44730S, 830628M91, 833455M1, 87073S91, 87073S94, 8N33544A, 8N33544B, 8N33544C, 8N33544D, 8N33545, 8N3585, 8N3586, 8N3591, 915086, 920089, 9636445, D5UZ3591A (Item #: 178090, Ref: S.67109)$22.60
Steering Sector Retainer Seal - This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. Measures 1.125 inch I.D., 1.442 inch O.D. and 0.200 inch wide. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Item #: 124153, Ref: 8N3591B)$4.70
Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586)$2.20
Steering Sector, Left Hand - Double Steering Sector [7 Teeth and 1 Double Tooth). Replaces OEM numbers 251294, C3NN3527A. For 4-Cylinder Fords Only [1950 to 1964]. (Item #: 111898, Ref: 251294)$202.00
Steering Sector, Left Hand - Left Hand Steering Sector Shaft (Single Gear) 5 tooth. For 8N serial number 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM numbers 251293 and C3NN3526A. (Item #: 114749, Ref: 251293)$219.00
Steering Shaft Bearing - For Ford tractor models NAA, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000 (1964-earlier), 2031, 2111, 2120, 2130, 2131, 4000 (1964-earlier), 4031, 4120, 4121, 4130, 4140, Replaces Ford OEM number 8N3571, Bearing Only, For Complete Bearing - Cup And Cone use Item #: 111857, (Item #: 179748)$13.50
Steering Shaft Bearing - For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 111857, Ref: 8N3571-OE)$11.30
Steering Shaft Bearing And Cup Assembly - Replacement for bearing type. For tractor models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft/top and bottom. (Item #: 178073, Ref: 8N3571-52)$22.20
Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A, 310875, B7NN3517A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Item #: 124501, Ref: 8N3517)$21.50
Steering Shaft Bearing Cup - This Steering Shaft Bearing cup is used with Bearing Cone part number 8N3571-OE and measures 1.75 inches outside diameter. For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 173338, Ref: 8N3552)$13.10
Steering Shaft Bearing and Cup Assembly - 1-3/4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for one set. Two required for the listed models. Replaces 8N3571 and 8N3552. (Item #: 111857, Ref: 8N3505)$11.30
Steering Shaft Grommet - Steering Column to Instrumental Panel Grommet measures 1 1/2 inches inside diameter, 2 1/8 outside diameter and is 1/4 inch thick. For tractors: 8N {1948-1952}. (Item #: 126704, Ref: 8N3578)$6.70
Steering Shaft Upper Bearing and Race - Use (1) 8N3571-OE and (1) 8N3552 This upper steering shaft bearing and race are for models Super Major, 2600, 2610, 3000 (1/65-8/68), 3600, 3610, 3910, 4100, 4110. Replaces C5NN3552A, C5NN3N615A, 8N3571, 8N3552 (Item #: 111857, Ref: C5NN3552A)$11.30
Steering Shaft and Nut Assembly - Right hand spiral with single bolt sector adjustor. For tractor models 8N (1950->1952). (Item #: 125545, Ref: 8N3575B)$117.00
Steering Shaft and Nut Assembly - For 8N 1948-1949 with 4 bolt Sector Adjustor. LEFT HAND SPIRAL. Serial number less than 216989 (1948-1949). (Item #: 115049, Ref: 8N3575A)$241.00
Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 splined hub. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Item #: 101425, Ref: D6NN3600B)$34.00
Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS)$14.30
Universal Parts and Accessories Category: Steering
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275)$8.00
Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279)$10.10
Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278)$13.40
Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323)$16.10
Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277)$8.90
Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280)$8.00
Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS)$14.30
No Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276)$9.60
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
