FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford Super Major Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Actuator Rod Seal - For model Super Major. (Item #: 179665, Ref: E104FB9) $5.40

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Disc Brake Lining Kit - Fits Super Major. Kit contains 4 linings with 48 rivets for 1 side, 2 required for tractor. (Item #: 105505, Ref: E1ADDN2284) $22.98

Spring, Pedal Return - Brake Pedal Return Spring with disc brakes. (Item #: 179688, Ref: E1ADDN2456) $11.70

Clutch

No
Picture
Clutch Disc - This clutch disc is solid, organic, measures 11.811 diameter, has a 10 splined hub that measures 1.375. Replaces E1ADKN7550D, 81805300, SW00331, SW01848. For models Major, Super Major and Power Major (Item #: E1ADDN7550C) $154.50

Clutch Disc - For tractor models: Fordson Major, Power Major, Super Major. 11 inch Clutch disc, 1-3/8 inch, 10 spline. Replaces 83916952, 82006017, 81866441, D8NN7550DA, F0NN7550DA. Used in single clutch configurations. (Item #: 176933, Ref: D8NN7550DA) $101.00

No
Picture
Clutch Disc - For Ford tractor models Major, Power Major, Super Major, Replaces Ford OEM number E1ADDN7550C, Size: 11.811", Spline Count: 10, Spline Diameter: 1.375", (Item #: 169845) $57.00

Clutch Disc, Remanufactured - For Ford tractor models Major, Super Major, Clutch Size: 12", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, For a New version of this sku use Item #: 130113, (Item #: 206197) $108.01

Clutch Disc, Remanufactured - For Ford tractor models Major, Super Major, Compatible with New Holland Bale Movers (s) 1065, 1068, 1069, 1075, 8500, Clutch Size: 12-7/8", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206198) $116.01

Clutch Disc, Remanufactured - For Ford tractor models Major, Super Major, Compatible with New Holland Bale Movers (s) 1049, 1065, 1068, 1069, 1075, 8500, Clutch Size: 12-7/8", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 206199) $129.01

Clutch Disc, Remanufactured, FD850DA - For Ford tractor models Dexta, Major, Super Dexta, Super Major, Replaces Ford OEM number FD850DA, Clutch Size: 11", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206196) $114.01

Clutch Plate - For Ford tractor model Super Major, Replaces Ford OEM number 82006017, F0NN7550DA, Spline Count: 10, Spline Diameter: 1.375", Diameter: 11", (Item #: 167701) $100.72

No
Picture
PTO Disc - This PTO Disc is solid, organic, measures 12 inches in diameter, hub is 16 spline and 2.125 inches in diameter. Replaces E1ADDN7764, VPG002, 81808611 and SW01770. For models Major, Super Major and Power Major (Item #: E1ADDN77641) $115.87

Pilot Bearing - For Fordson Major, Power Major, Super Major. (Item #: 185130, Ref: E1ADKN7600A) $6.98

Pressure Plate Assembly, Remanufactured, 957E7563B - For Ford tractor models Dexta, Major, Super Dexta, Super Major, Replaces Ford OEM number 957E7563B, FE563A, 957E7563BRM, E1ADDN7563A, 81718002, 81718005, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206229) $128.00

No
Picture
Single Stage Pressure Plate, 11" - For Ford tractor models Dexta, Major, Super Dexta, Super Major, Replaces Ford OEM number FE7563BN, Size: 11", PPA Levers: 3, PPA Springs: 9, Flywheel Step: Flat, (Item #: 176962) $193.00

Cooling System

Fan Belt - Narrow fan belt. For Major Diesels prior to 1965. (Item #: 112180, Ref: DKN8620C) $17.70

Fan Belt - This belt has a length of 44.25 inches, thickness measures 0.354 of an inch, and has a width measuring .531 of an inch. Fits Dexta, Super Dexta, Fordson Major, Power Major, Super Major. (Item #: 115592, Ref: E1ADKN8620C) $8.90

Radiator - Radiator Fits Major, Power Major, Super Major. Radiator core measures 18 1/2 inches wide and 18 3/4 inches tall. Has attaching lugs on outer edge. Replaces 211000, AR2106, SW07550, SW15423. (Item #: 119632, Ref: E1ADDN8005C) $426.00

Radiator Cap - For tractor models Dexta, Super Dexta, Major, Power Major, Super Major. (Item #: 169633, Ref: E62A8100A) $11.60

Radiator Hose - Filler - For Ford tractor models Major, Power Major, Super Major, Replaces Ford OEM number E1ADKN8333, 1.75" I.D., For Hose Clamp use Item #: 130455, (Item #: 159659) $7.90

Radiator Hose - Upper - For Ford tractor models Major, Super Major, Replaces Ford OEM number E1ADKN8260, 1.75" I.D., For Hose Clamp use Item #: 130455, (Item #: 159658) $7.60

Radiator Hose Kit - Kit contains upper, lower and filler hoses. For tractor models Major, Power Major, Super Major diesel only. (Item #: 178828, Ref: S.66641) $24.60

Radiator Hose, Bottom - For tractor models Fordson Major, Power Major, Super Major. (Item #: 159657, Ref: E1ADDN8286) $11.70

Thermostat - 172 degree with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Major, Super Major. (Item #: 185072, Ref: D8NN8575CAWG) $18.90

Water Pump - Comes with Hub and mounting gasket. For tractor models: Major, Power Major, Super Major - 220 CID Engine Except With Power Steering. Replaces E1ADKN8501B, DKN8501AB (Item #: 116843, Ref: DKN8501AB) $43.70

Water Pump Repair Kit - For tractor models Major, Power Major, Super Major. (Item #: 182806, Ref: E1ADKN8591) $53.00

Water Pump Replacement Kit - Kit includes DKN8501AB water pump with gasket, S.66641 three-piece hose set, E1ADKN8620C fan belt, 6 hose clamps, and clamp key. This kit is used on Fordson Major 1952 - 1958, Super Major 1961 to 1964 and Power Major 1958 � 1961. YTO-119849 (Item #: 184653, Ref: 119849) $97.00

Decals and Emblems

Emblem - For Ford tractor model Super Major, Replaces Ford OEM number E1ADDN16605F, (Item #: 155846) $2.70

Ford Emblem - For Ford tractor models Dexta, Major, Super Dexta, Super Major, (Item #: 155845) $40.26

Hood Emblem, Front - Chrome plated. For model Fordson Super Major. (Item #: 111705, Ref: S.67278) $210.00

Hood Emblem, Side - Chrome plated. For model Fordson Super Major. Replaces E1ADDN16605F (Item #: 125414, Ref: S.67277) $154.00

Drive Train

Gear Shift Lever Assembly - Comes with Houseing. For Fordson Super Major, Major, Power Major. Also replaces E1ADDN7203A (Item #: E1ADDN7210A) $170.00

Oil Filler Plug - For transmission and rear end. For tractor models 2000 3 cylinder, 231, 233, 234, 2600V, 333, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 2100, 2110, 2120, 2150, 2300, 2600, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000 3 cylinder, 4100, 4110, 4140, 4190, 4200, 4300, 4340, 4400, 4410, 4500, 4600, Dexta, Power Major, Super Dexta, Super Major. Please verify the thread size before ordering. This plug measures 1-5/8 inch x 12 thread. Does not come with gasket. Use NAA9160A for gasket. (Item #: 113703, Ref: 957E7010) $15.10

Seal, Inner Planetary - Check Dimensions of the seal before ordering, many of the models listed used more than one axle configuration. This seal measures 2 5/8 inches insdie diameter, 3 1/2 inches outside diameter and is 1/2 inch wide. Used on the following some configurations Major, Power Major, Super Major. Replaces OEM E88GE9, 81717081, 81710683, 510E6362, 881991M1 (Item #: 106294, Ref: 881991M1) $9.60

Spider Gear - Gear, Differential Spider. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Major, Super Dexta, Super Major. Replaces 81728114, 957E4292B, E1ADDN4213B. (Item #: 172809, Ref: DDN4213B) $41.60

Electrical System

Control Box - For tractor models Dexta, Major, Power Major, Super Dexta, Super Major all after serial number 957E-58225. 5 CONDUCTORS. (Item #: E27N10505F-Late) $78.00

Control Box - Control Box - For tractor models Dexta and Super Dexta 01/57-10/62, Major 02/1960-12/1964, Power Major, Super Major all before serial number 957E-58225. 4 CONDUCTORS. Can Replace OEM number 81718302. (Item #: 172512, Ref: E27N10505F) $59.97

Generator, 12 Volt - 11 amp. For tractor models Dexta, Super Dexta, Major, Power Major, Super Major. Replaces Ford/New Holland:81806433, ADN10001, E27N10000, Fordson: E1ADN10001, Perkins: 2871182. (Item #: 113578, Ref: E1ADN1001) $162.00

Starter - Lucas Style (16604), Remanufactured, E1ADDN11000C, Lucas, 26072 - For Ford tractor models Major, Super Major, Replaces Ford OEM number E1ADDN11000C, E1ADDN11000D, E7ADDN11000D, Replaces Lucas manufacturer number 26072, 26072J, 26109, 26109E, 26125, 26125A, 26172, 26172K, 26172L, Replaces New Holland OEM number 81712422, Replaces manufacturer number 16604, 180-351, LRS01005, 91-17-8856, Lucas Style, Voltage: 12, Rotation: Clockwise, Teeth: 11, (Item #: 203537) $560.01

Starter Boot - This Starter Rubber Boot is for tractor models Major, Power Major, Super Major, Dexta, Super Dexta all with original starter. (Item #: 113514, Ref: E1ADDN11535) $17.50

Starter Conversion Kit - This Starter Conversion Kit including key switch and instructions for converting Fordson Major, Power Major and Super Major from mechanical push rod activated starter to key activated starter. (Item #: 183682, Ref: B1391) $391.00

Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Item #: 183911, Ref: SRK403) $33.90

Starter Solenoid - Fits Fordson Major, Power Major, Super Major, Dexta, Super Dexta. (Item #: 168321, Ref: E1ADDN11450C) $18.30

Starter Switch - This new starter switch fits Fordson Major, Power Major, Super Major, Dexta and Super Dexta, all when using an original starter. Replaces OEM part numbers: 81712538, E1ADDN11500, DDN11500, 705383R91, 3114409R92. (Item #: 154742, Ref: E1ADDN11500) $21.50

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A (Item #: 181969, Ref: 80855520) $165.00

Wiring Harness Main - For Power Major and Super Major. Replaces E1ADDN14401N. (Item #: 113576, Ref: E1ADDN14401J) $82.98

Engine Bearings

Connecting Rod Bearing - .010" Oversize - Journal - For Ford tractor models Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Replaces Ford OEM number 703F6211BBA, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106364, (Item #: 106361) $8.10

Connecting Rod Bearing - .020" Oversize - Journal - For Ford tractor models Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Replaces Ford OEM number 703F6211BCA, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106364, (Item #: 106362) $12.60

Connecting Rod Bearing - .030" Oversize - Journal - For Ford tractor models Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Replaces Ford OEM number 703F6211BDA, Sold per journal, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106364, (Item #: 106363) $12.98

Connecting Rod Bearing - .040" Oversize - Journal - For Ford tractor models Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Replaces Ford OEM number 703F6211BEA, Sold per journal, Bearing Size: .040" Oversize, For Standard connecting rod bearing use Item #: 106363, (Item #: 106364) $8.55

Connecting Rod Bearing - Standard - Journal - For Ford tractor models Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Replaces Ford OEM number 703F6211BAA, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106364, (Item #: 106360) $18.40

No
Picture
Main Bearing Set - .010 inch undersize set, 5 pair. For FORDSON Major, Super Major. Set comes with .STD Thrust Washers. (Item #: 106405, Ref: MBK-FMD-010) $46.10

No
Picture
Main Bearing Set - .020 inch undersize set, 5 pair. For FORDSON Major, Super Major. Set comes with .STD Thrust Washers. (Item #: 185475, Ref: MBK-FMD-020) $100.00

No
Picture
Main Bearing Set - .030 inch undersize set, 5 pair. For FORDSON Major, Super Major. Set comes with .STD Thrust Washers. (Item #: 184812, Ref: MBK-FMD-030) $134.00

No
Picture
Main Bearing Set, .010 - .010 inch undersize set, 5 pair. For FORDSON Major, Super Major. Kit comes with .STD Thrust Washers. (Item #: 106405, Ref: MBK-FMD-010) $46.10

No
Picture
Main Bearing Set, .020 - .020 inch undersize set, 5 pair. For FORDSON Major, Super Major. Kit comes with .STD Thrust Washers. (Item #: 185475, Ref: MBK-FMD-020) $100.00

Main Bearing Set, .030 - .030 inch undersize set, 5 pair. For FORDSON 5000, 5110, 5610, 5900, 6410, 655, 6610, Major, Power Major, Super Major. Kit comes with .STD Thrust Washers. (Item #: 184812, Ref: MBK-FMD-030) $134.00

Main Bearing Set, .040 - For tractor models Major, Power Major, Super Major. Replaces 528E6K371E, 81823485, 81823490, 528E6K371K (Item #: S.65217) $40.74

Main Bearings - .020" Oversize - Set - For Ford tractor models Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Sold in complete set (does not include thrust washers), Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106407, (Item #: 106406) $54.00

Main Bearings - .020" Oversize - Set - For Ford tractor models Super Major, 4830, 5000 (1965-3/68), 5030, 5100, 5600 (1975-9/80), 5610 (1981-'93), 5900, 6600, 6610 (1981-93), 6710, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 555C, 555D, 575D, 650, 655, 655A, 655C, 750, 755, 755A, 755B, Compatible with Ford Engine (s) 268, 268T, Replaces Ford OEM number 87790359, 87790492, Sold in complete set, Bearing Size: .020", Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106418, (Item #: 106416) $75.00

Main Bearings - .030" Oversize - Set - For Ford tractor models Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Sold in complete set (does not include thrust washers), Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106406, (Item #: 106407) $58.00

Main Bearings - .030" Oversize - Set - For Ford tractor models Super Major, 4830, 5000 (1965-3/68), 5030, 5100, 5600 (1975-9/80), 5610 (1981-'93), 5900, 6600, 6610 (1981-93), 6710, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 555C, 555D, 575D, 650, 655, 655A, 655C, 750, 755, 755A, 755B, Compatible with Ford Engine (s) 268, 268T, Replaces Ford OEM number 87790360, 87790493, Sold in complete set, Bearing Size: .030", Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106418, (Item #: 106417) $79.00

Main Bearings - Standard - Set - For Ford tractor models Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Sold in complete set (does not include thrust washers), Bearing Size: Standard, For .010" main bearing use Item #: 106407, (Item #: 106404) $58.00

No
Picture
Rod Bearing Set, .010 inch - For tractor models Major, Super Major with 220 CID 4 Cylinder Diesel. (Item #: 185576, Ref: CRK-FMD-010) $63.00

No
Picture
Rod Bearing Set, .020 inch - For tractor models Major, Super Major with 220 CID 4 cylinder Diesel Engine. Replaces 81854544 (Item #: CRK-FMD-020) $38.15

No
Picture
Rod Bearing Set, .030 inch - For tractor models Major, Super Major with 220 CID 4 Cylinder Diesel. (Item #: 184832, Ref: CRK-FMD-030) $57.00

No
Picture
Rod Bearing Set, .040 inch - For tractor models Major, Power Major, Super Major. (Item #: S.65193) $31.12

No
Picture
Rod Bearing Set, Std - For tractor models Major, Super Major with 220 CID 4 Cylinder Diesel. (Item #: CRK-FMD) $35.64

No
Picture
Thrust Washer - For Ford tractor models Major, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5110, 5600, 5610, 5640, 5700, 5900, 6000, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8340, Compatible with Ford Construction and industrial models 3500, 3550, 4500, Replaces Ford OEM number 508E4230A, (Item #: 174131) $4.30

No
Picture
Thrust Washer Set, Std - For tractor models Fordson Major, Power Major, Super Major. Replaces E160Z9. (Item #: E159Z9) $29.48

Engine Gaskets

Full Gasket Set - For Ford tractor models Major, Power Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Replaces Ford OEM number E1ADDN6008, 82845229, Includes crank seals, Contains all gaskets necessary for a complete engine overhaul, (Item #: 106298) $102.00

Head Gasket - For Major, Power Major and Super Major; all with 220 Engine. (Item #: 172626, Ref: E1ADDN6051E) $35.80

Head Gasket Set - For Ford tractor models Major, Power Major, Super Major, Compatible with Ford Engine (s) 220 (diesel), Contains all gaskets necessary to replace the cylinder head (valve seals not included), (Item #: 106304) $59.00

Oil Pan Gasket Set - Fits Major, Super Major. (Item #: 106308, Ref: E1ADDN6781C) $12.70

Oil Seal, Front - 60mm x 89mm x 12mm. For tractor models Major, Power Major, Super Major. All with 220CID engine. (Item #: 106294, Ref: 510E6362) $9.60

Overhaul Gasket Kit - 6 Holes in valve cover gasket. Kit also contains front lip type and rear rope type seals. For Major and Super Major Diesel 1618653 and up, 4-1957 to 8-1961. Overhaul Gasket Kit. (Item #: 184578, Ref: DDN6008AB) $92.00

Rear Crankshaft Seal - For Ford tractor models Major, Power Major, Super Major, Compatible with Ford Engine (s) 220 (diesel) Replaces Ford OEM number 793F6701, , Compatible with New Holland Combine (s) TR70, TR75, 985, 995, 1400, Replaces New Holland OEM number 793F6701, (Item #: 106296) $8.00

Rocker Cover Gasket - With bolt holes. For tractor models Power Major, Super Major from 5/1957 and up. (Item #: 186288, Ref: 528E6584B) $19.80

Engine Rebuild Kits

$Ford Super Major Engine Rebuild Kit - Less Bearings - 2\61-4\61, 592E, 220$
Engine Rebuild Kit - Less Bearings - 2/61-4/61, 592E, 220 - For Ford tractor models Super Major (engine s/n 1591023-1599500), 5000, Compatible with Ford Engine (s) 220 (diesel), 592E, Bore: 3.9375", Stroke: 4.526", Models 2/61-4/61, 4.706" liner flange, 1.375" piston pin, 9/16" and 5/8" main bolts, 3 bolt camshaft, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For thrust washer set use Item #: 106407, (Item #: 130954) $640.00

$Ford Super Major Engine Rebuild Kit - Less Bearings - 4\57-2\61, 592E, 220$
Engine Rebuild Kit - Less Bearings - 4/57-2/61, 592E, 220 - For Ford tractor models Major (engine s/n 1425098-1481090), Power Major (engine s/n 1481091-1578885), Super Major (engine s/n 1578886-1591022), Compatible with Ford Engine (s) 220 (diesel, s/n 1425098-1591022), 592E, Bore: 3.9375", Stroke: 4.526", Models 4/57-2/61, 4.622" liner flange, 1.375" piston pin, 1/2" main bolts, In-line head ports, Open vent system, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For thrust washer set use Item #: 106407, (Item #: 130773) $752.00

$Ford Super Major Engine Rebuild Kit - Less Bearings - 4\61-12\64, 592E, 220$
Engine Rebuild Kit - Less Bearings - 4/61-12/64, 592E, 220 - For Ford tractor models Super Major (engine s/n 1599501-later), 5000, Compatible with Ford Engine (s) 220 (diesel), 592E, Bore: 3.9375", Stroke: 4.526", Models 4/61-12/64, 4.706" liner flange, 1.375" piston pin, 9/16" and 5/8" main bolts, 1 bolt camshaft, Kit includes: Pistons, Piston Ring Set, Liners, and Gasket set with Crank Seals, Kit does not include connecting rod bushings, connecting rod or main bearings, For thrust washer set use Item #: 106407, (Item #: 130774) $691.00

Overhaul Kit, 220 Diesel without Bearings - Complete Overhaul Kit. For tractor models Major, Super Major with 1.25 inch wrist pins, 3-15/16 inch bore size and 4.622 inch sleeve flange outside diameter. Engine has 1 seal per sleeve. Contains same parts as FMDK1 less bearings. (Item #: 130772, Ref: FMDK1-LCB) $798.00

No
Picture
Overhaul Kit, 220 Diesel without Bearings - Complete Overhaul Kit. For tractor models Major, Super Major with 1.375 inch wrist pins, 4.622 inch sleeve flange outside diameter and 3-15/16 inch bore size. Kit contains, sleeve, sleeve seals (1 per sleeve), pistons, rings, pins and retainers, complete gasket kit, intake and exhaust valves, springs, guides. Bearings are available, must be ordered separately. (Item #: FMDK2-LCB) $928.62

Overhaul Kit, 220 Diesel without Bearings - 220 CID 4 cylinder diesel 3-15/16 inch standard bore. Complete overhaul kit. For Super Major, Power Major with 1.375 inch wrist pins and sleeve flange outside diameter of 4.706 inch. Kit contains, sleeves, sleeve seals (2 seals per sleeve), pistons, rings, pins and retainers, complete gasket kit, intake and exhaust valves, springs, guides. Bearings are available, must be ordered separately. (Item #: FMDK3-LCB) $915.59

Valve Train Kit - For Ford tractor models Major (engine s/n 1481090-earlier), Power Major (engine s/n 1481091-1578885), Super Major (engine s/n 1578886-1591022), Compatible with Ford Engine (s) 220 (diesel), Bore: 3.9375", Models 1/52-3/61, Models 1/52-3/61, Kit includes: Intake and exhaust valves, guides, and springs, Does not include valve keepers, For Keepers use Item #: 128566, (Item #: 160654) $195.98

Engine Parts

Connecting Rod Bushing - 1.375 inch pin. For tractor models Major, Power Major, Super Major. (Item #: 162420, Ref: E1ADDN6207) $4.20

Connecting Rod, Used - For Ford tractor models Super Major, TW5, TW10, 3230, 3430, 3610, 3910, 3930, 4000 (1965-1975), 4110, 4120, 4130, 4140, 4330, 4340, 4600, 4610, 4630, 4830, 5000 (1965-1975), 5030, 5100, 5600 (1975-1981), 5610, 5900, 6600 (1975-1981), 6610, 6700, 6710, 7810, 7910, 8000, 8210, 8530, 8600, 8700, Compatible with Ford Construction and industrial models A64, 345, 445, 455, 515, 535, 540, 545, 545D, 550, 555, 655, Replaces Ford OEM number C7NN6205A, C7NN6205, E5NN6205AA, E1TN6205AD, Solid non-drilled Beam, ID Pin Bushing: 1.500", For a new version of this item use Item #: 128642, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435947) $40.01

Crankshaft - 76 Tooth Gear - Late - For Ford tractor models Super Major, 5000, 5100, 5190, 5200, 5600, 5610, 5700, 6000, 6500, 6600, 6610, 6700, 6710, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 650, 655, 750, 5500, 5550, 7500, Compatible with Ford Engine (s) BSD442, 256, Replaces Ford OEM number 81804029, C5NE6303K, F0NN6300FB, Replaces Casting number 6110A, Engine: 256 CID - 4.2 Stroke, 4 Cylinder, Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole, Balance Drive Gear: 76 Tooth Right Hand Helix, 15MM Wide - Installed, Snout: 1 Bolt Hole, 1 Keyway, Verify gear tooth count before ordering, Additional Handling and Oversize Fees Apply To This Item, (Item #: 100553) $428.58

Crankshaft, Less Bearings - New Crankshaft Fits Major, Super Major. (Item #: 182855, Ref: E1ADDN6303F) $597.00

No
Picture
Cylinder Head, Remanufactured, 683F609GAB - For Ford tractor model Super Major, Replaces Ford Casting number 683F609GAB, Cylinders: 6, Casting No. 683F609GAB, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 203943) $870.01

No
Picture
Cylinder Head, Used - For Ford tractor model Super Major, Replaces Ford Casting number E1ADDN6050F, Engine(s): 220, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200136, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400136) $620.01

No
Picture
Cylinder Liner - For Ford tractor model Super Major, Replaces Ford OEM number E1ADDN6055E, 81710303, Bore Diameter: 99.924mm, Outside Diameter: 110.820mm, Overall Height: 222.770mm, Flange Diameter: 119.583mm, Flange Width: 11.176mm, Wet Type Sleeve, (Item #: 176489) $82.00

Flywheel Ring Gear - For Ford tractor model Super Major, Replaces Ford OEM number E1ADDN6384, (Item #: 155124) $72.00

Thrust Washer Set - For Ford tractor models Major, Super Major, Sold in complete set, (Item #: 106408) $27.00

Valve Guide - For FORDSON Major, Super Major. (Item #: 179825, Ref: DDN6510A) $2.98

Valve, Exhaust - Exhaust valve for Fordson Major and Super Major with 220 CID 4 Cylinder Diesel. (Item #: 161030, Ref: 723F6505ABA) $15.30

Valve, Intake - Intake valve. For Fordson Major and Super Major with 220 CID 4 Cylinder Diesel. (Item #: 161029, Ref: DDN6507) $10.80

Engine Pistons and Sleeves

Piston Kit, 220 CID Diesel - For 220 CID Diesel engine (serial number 1425098 to 1591022) using 1.375 inch piston wrist pins. Contains (4) pistons, sleeves and rings. Sleeve dimensions: Barrel outside diameter 4.321 inch, flange outside diameter 4.622 inch. For FORDSON Major, Super Major. (Item #: PK16A) $725.65

No
Picture
Piston Kit, 220 CID Diesel - For 220 CID Diesel engine (to serial number 1425097) using 1.25 inch piston wrist pins. Contains (4) Pistons, sleeves and rings. Sleeve dimensions: Barrel outside diameter 4.321 inch, Flange outside diameter 4.622 inch. (Item #: PK16) $634.12

Piston Kit, STD, 220 CID Diesel - For 220 CID Diesel engine after serial number 1591022 (Mid 1961 and up). Contains (4) Pistons, sleeves, pins, retainers and rings. Sleeve flange outside diameter 4.706 inch. (1.375 inch wrist pins). For FORDSON Major, Super Major. (Item #: PK16B) $750.54

Engine Rings

Piston Ring Set - Standard - 4 Cylinder - For Ford tractor models Major, Power Major, Super Major, Fits Ford Engine (s) 199 (gas), Bore: 3.740”, Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil, Sold as a complete 4 cylinder set, (Item #: 129083) $268.00

No
Picture
Piston Ring Set, 220 CID Diesel - Sizes available are STD, .010 inch, .020 inch, .030 inch or .040 inch (Specify size needed in Comments Box when ordering. For tractor models Major, Super Major all with 220 CID Diesel Engine. This set is for 4 cylinders, each using (3) 3/32 inch compression rings and (2) 3/16 inch oil rings (5 rings per cylinder). Made in USA. (Item #: 128934, Ref: 2C5837) $38.60

Exhaust System

Exhaust Elbow - Fits Fordson Major, Power Major, Super Major. Gasket, part number E1ADKN9450B available separately. Replaces E1ADKN9488, 81796352. Used with vertical exhaust with inlet inside diameter of 1 7/8, such as part number K924341. (Item #: 110441, Ref: E1ADKN9488) $73.00

Exhaust Elbow Gasket - Used with E1ADKN9488 Elbow. It replaces E1ADKN9450B, 81712052 (Item #: 110440, Ref: E1ADKN9450B) $2.30

Exhaust Manifold Gasket - Major, Power Major and Super Major. Used with S.61645 Manifold. Replaces E1ADDN9448B (Item #: 179779, Ref: S.66557) $4.10

Exhaust Manifold with Angled Mtg Holes - For 220 CID 4-cylinder DIESEL in: Fordson Major, Power Major and Super Major. ALL using angled mounted holes on manifold. Exhaust Manifold without gasket. Gaskets available as part number S.66557. Replaces E1ADDN9429, E1ADN9429B, 2701E9430B (Item #: 178619, Ref: S.61645) $140.00

Muffler, Vertical - This vertical round muffler fits Fordson Major, Power Major, Super Major. It measures 1 7/8 inlet inside diameter, 20 inch shell length, 2 inch outlet outside diameter and 35 inches overall length. (Item #: 100563, Ref: E1ADDN5230A) $47.80

Fuel System / Air Intake

Fuel Cap - This fuel cap is for tractor models Major, Power Major, Super Major. (Item #: 172945, Ref: E1ADDN9030) $9.60

Fuel Filter - Fuel filter element, cartridge type. Comes with 3 o-rings. Overall length measures 3.504, outer diameter of 2.835, and inner diameter of 1.259 on both ends. For the following models: Major, Power Major and Super Major. Replaces P551167, FF5364, and 81715763. (Item #: 172359, Ref: 1850450M2) $6.00

Fuel Filter Assembly - This Fuel Filter Assembly is used on Fordson Major and Super Major Tractors. Includes base, filter element and top mounting plate. It replaces original part numbers E1ADDN9155C, 81805786 (Item #: 179305, Ref: E1ADDN9155C) $40.00

Fuel Filter Diesel - Fuel filter measures 3 1/4 inches long, 2 3/4 inches outside diameter and 1 5/16 inside diameter on big end. For tractor models Dexta, Super Dexta, Major, Power Major, Super Major (thru 1964). (Item #: 172796, Ref: EPN99162A) $6.00

Fuel Lift Pump Repair Kit - Used to repair original equipment fuel lift pumps on Ford / New Holland models: 2150, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5610, 5900, 6410, 650, 6500, 655, 655A, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Major, Super Major, TW10, TW15, TW20, TW25, TW30, TW35, TW5. This repair kit replaces OEM numbers 81458909, 500093, 693F9K340AA, B1016 (Item #: 172699, Ref: 693F9K340AA) $20.60

Fuel Lift Transfer Pump - For Ford tractor models Major, Super Major, Replaces Ford OEM number E1ADDN9350, 81711941, DDN9350, Mounting holes: 2, Inlet Position: 6 o'clock (with cam lever pointing at you), Outlet Position: 12 o'clock (with cam lever pointing at you), Includes Gasket, (Item #: 117595) $38.00

Fuel Pump Repair Kit - For tractor models Major, Power Major, Super Major. (Item #: 116895, Ref: K262265) $17.00

Fuel Pump Repair Kit - This Fuel Pump Repair Kit is used to repair fuel pump part numbers: D8NN9350AB, 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. (Item #: 172699, Ref: S40569) $20.60

Fuel Tank Valve - plastic handle - For Ford tractor models Major, Super Major, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5550, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8400, 8600, 9000, 9200, 9600, Compatible with Ford Construction and industrial models 230A, 233, 234, 340A, 340B, 345C, 345D, 550, 555 (DTC), 655, 5500 Replaces Ford OEM number D1NN9N024B, 83935915, 83917402, C5NN9N024A, D1NN9N024A, D2NN9N024C, E1ADDN9189B, E0NN9N024AA, E2NN9N024AA, E2NN9N200A, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TT55, TT75, Replaces New Holland OEM number D8NN9N024AB, 81830037, 83926534, D8NN9N024AA, Plastic Knob, 1/2" Pipe Thread Inlet, 5/16" Tube Outlet, For brass handle use Item #: 181076, (Item #: 111712) $7.98

Fuel Transfer Pump - Lift Pump, 2-bolt. Mounts to Injection Pump. For Super Major (8-1961/1964), 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4410, 5000, 5100, 5110, 5200, 5610, 6600, 6610, 7000, 7100, 7200, 7610, 7710. Fuel Transfer Pump. Used on 3, 4 and 6 Cylinder Diesel Engines. Replaces: 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. Uses S40569 Repair Kit. (Item #: 106200, Ref: D8NN9350AB) $21.60

Injector Nozzle - For tractor models Dexta, Super Dexta, Power Major, Super Major. Replaces Ford New Holland: 81718678, 957E993149, 960E993149 and Perkins: 2646607, 31990. (Item #: 113541, Ref: 960E993149) $25.20

Injector Pump Drive - For tractor models Major, Power Major, Super Major. Replaces, E1ADDN993184, E1ADDN993188, E238CL9. For late models with Roosa Pump. (Item #: 179672, Ref: E1ADDN993187) $90.00

Injector Pump Drive Pad - Fits Major, Power Major, Super Major. (Item #: 112026, Ref: E1ADDN993184) $29.71

Injector Pump Governor Diaphragm - For tractor models Major, Power Major, Super Major up to 4/1962. (Item #: 112027, Ref: E1ADDN993115B) $32.10

Gauges

Gauge Cluster, Temerature, Oil, Generator - For tractor models Power Major, Super Major 8-1958 and up. (Item #: 162828, Ref: E1ADDN10849) $99.00

Proofmeter - For tractor models Major, Power Major, Super Major 8/1958 and up. (Item #: 110517, Ref: E1ADDN17360A) $72.00

Proofmeter - Proofmeter. For model Dexta, Super Dexta diesel only, Super Major. Replaces 957E17360A. Use cable part number 957E17365C. (Item #: 110442, Ref: 957E17360D) $72.00

Proofmeter Cable - 49 inch long, ends are 13/16 inch inside diameter and 5/8 inch inside diameter. For tractor models Major, Super Major diesels less exhauster from 4/1962 and up, Major, Super Major, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3300, 3310, 3550, 420, 445, 515, 535, 545, 5500. Note type of ends in picture. Replaces C7NN17365B, D3NN17365A, D3NN17365C, E1ADDN17365C, E1NN17365BA, E9NN17365AA, VPM5212, 1500491C1, 1970910C1, 81807558, 81817090, 81837768, 81837769, 82847520, 83931709, 83933021, 83935157, 83983613. (Item #: 104134, Ref: E1ADDN17365C) $10.80

Proofmeter Cable - Same size ends at 5/8 inch. For tractor models (Major gas or diesel), Power Major, (Super Major with exhauster). (Item #: 179258, Ref: E1ADDN17365A) $29.50

Hitch / Drawbar

No
Picture
Stabilizer Pin - For Ford tractor models Major, Power Major, Super Major, 3230, 3430, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5610S, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7810, 7810S, 7910, 8210, Replaces Ford OEM number 355278S36, 81824450, 5/8" x 2 3/8", (Item #: 173864) $5.00

Hydraulic System

Hydraulic Filter - Hydraulic Filter is used on 5000, 5100, 5200, 5500, 7000, 7100, 7200, Major, Power Major, Super Major. Replaces 81802003, 84277202, C5NNN832C (Item #: 170936, Ref: C5NNN832C) $9.90

Hydraulic Pump Safety Valve - For (4000, 5000, 7000), (Major, Super Major, Power Major all 1952-1964. Hydraulic Pump Safety Valve. (Item #: 170946, Ref: E1ADDN984) $44.20

Hydraulic Upper Lift Arms - Used on Fordson Power Major, Super Major, this part replaces E1ADDN994620A, 81718793 (Item #: 182898, Ref: E1ADDN994620A) $137.00

Lift Cover, Cylinder and Pump Seal Kit - For Fordson Major, Power Major and Super Major tractors. (Item #: 128571, Ref: 1934247) $27.10

No
Picture
Valve Assembly - Blue - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 6710, 7000, 7100, 7200, 7600, 7700, 7710, Replaces Ford OEM number C7NN488J, C7NN481E, C7NN488H, 82847532, 81819038, 81819039, 81819030, Valve Assembly - Blue, (Item #: 170943) $111.00

No
Picture
Valve Assembly - Green - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number C7NN481G, C7NN418G, DDN481E, C7NN488M, C7NN488N, C5NN488T, 81819043, 81819032, 81819042, Valve Assembly - Green, (Item #: 170945) $81.00

No
Picture
Valve Assembly - White - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 81819036, C5NN488L, 81819029, 81819037, 82847531, 82847550, C7NN481D, C7NN488G, C7NN488F, Valve Assembly - White, (Item #: 170942) $87.00

No
Picture
Valve Assembly - Yellow - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 81819031, 81819040, 81819041, 82847559, C5NN488N, C7NN488L, C7NN488K, C7NN588K, C7NN481F, Valve Assembly - Yellow, (Item #: 170944) $87.00

Lights

Fender Light Assembly - Works on either Right or Left hand side. Fits Fordson Major, Power Major, Super Major. (Item #: 113345, Ref: E1ADKN13202B) $58.28

Headlight Assembly, Inset In Grill - These Grill Headlight Assemblies fit Dexta, Major, Power Major, Super Dexta, Super Major. Also replaces 957E13200B. Mounts in grill. (Item #: 113252, Ref: D2NN13005D) $44.30

Rear Fender Light, LH - Fits Fordson Major, Power Major, Super Major. Fits LEFT hand side. (Item #: 113346, Ref: E1ADKN13405B) $96.00

Rear Fender Light, RH - Fits Fordson Major, Power Major, Super Major. Fits RIGHT hand side. (Item #: 113347, Ref: E1ADKN13404B) $32.60

Miscellaneous

Historical Tractor Photographs - These beautiful black and white photo reproductions are of 1920's and 1930's Fordson tractors. Set of 7 photos (12 inch x 18 inch). These are good semi-glossy prints suitable for framing. (Item #: S.22993) $33.16

Oil System

Oil Filter Cartridge Type with Gasket - For tractor models Dexta, Super Dexta, Power Major, Super Major (1959-1964). This filter is (4 1/2 inches in length, 2 3/4 inch outside diameter, 3/4 inch inside diameter). Replaces 957E6731, 957E6731A, 957E6731B. (Item #: 126048, Ref: 837595M91) $7.30

Oil Pressure Switch - For tractor models (Dexta, Super Dexta from 12/1958 to 1964), Major, Power Major, Super Major. (Item #: 182837, Ref: E1ADDN9278) $19.70

Oil Pump - Oil pump replaces 528E6600. Fits Major and Super Major built from 4/1957 to 12/1964. (Item #: 173231, Ref: 82847515) $187.00

PTO / Driveline

PTO Plate - For Ford tractor models Major, Power Major, Super Major, Replaces Ford OEM number E1ADDN7764, Clutch Size: 12", Clutch Hub Diameter: 2-1/8", Clutch Spline: 16, Clutch Center: Solid, Clutch Type: Woven, (Item #: 122815) $123.98

Seal, PTO - 89 x 44.5 x 19.1mm. For tractor models Major, Power Major, Super Major. Replaces 81805050. (Item #: 178423, Ref: E1ADDN7279A) $18.60

Seal, PTO - 89 x 54 x 12.5mm. Seals used in pairs sold individually. For tractor models Major, Power Major, Super Major. Replaces 81717958. (Item #: 178424, Ref: E1ADKN7297B) $8.40

Seal, PTO - 63.7 x 36.8 x 18.8mm. For tractor models Major, Super Major, Power Major. Replaces 81717963. (Item #: 178432, Ref: E2NN7305A) $23.20

Paint

No
Picture
Paint, Brownish Medium Gray, 1 Gallon - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 185240, Ref: TP245GAL) $120.00

No
Picture
Paint, Medium Gray, 1 Gallon - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100719, Ref: TP240GAL) $62.00

Seats

Seat Cushion Set - Blue with Orange Trim for Major, Power Major and Super Major. Two piece base and back for original 2 piece seat. (Item #: 178483, Ref: S.66517) $119.00

Seat Pan - With bracket on back. For tractor models (Dexta, Super Dexta, Power Major, Super Major all built after 11/1960). (Item #: 182926, Ref: 957E400C) $81.22

Sheet Metal / Body Parts

Fender, LH - For tractor models without brake drums. Fits Fordson Super Major. LEFT hand side fender. Additional $20 shipping due to weight. Note: Picture is for reference only. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 108059, Ref: E1ADDN16313E) $303.00

Fender, RH - For model without brake drums. Fits Fordson Super Major. Additional $20 shipping due to weight. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 108058, Ref: E1ADDN16312B) $297.00

Grill Set, With Light Holes - Left and Right Hand sides. Fits Fordson Super Major, Power Major (11/60 to 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 182848, Ref: E1ADDN8163) $153.34

Hood Handle - For tractor models Fordson Super Dexta, Super Major. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 168901, Ref: DDN16644) $53.88

Hood Latch - Right Hand - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 3000, 4000, 5000, 7000, 7100, 7200, Replaces Ford OEM number 85700110, E1ADKN16658, DKN16658, Without Handle, Fits Right Hand Side, (Item #: 163647) $14.60

Step Plate - For Major, Power Major, and Super Major, replaces E1ADDN16486. (Item #: 194511, Ref: E1ADDN16487) $42.80

Step Plate Set, Right and Left Sides - Fits Fordson Power Major, Super Major (12/1960 and newer). Replaces E1ADDN16450A-RH and E1ADDN16451A-LH. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155829, Ref: E1ADDN16450A) $241.88

Steering

Ball Bearing, Steering Gear - Used with E1ADKN3556 Ball Race. 14 used for main nut, 10 used in upper shaft bearing, 10 used in lower shaft bearing. For tractor models Major, Super Major, 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Replaces 353075S. (Item #: 167684, Ref: 83424343) $0.50

Bushing - Steering Rocker Shaft - For Ford tractor models Super Major, 2000, 2600, 3000, 3600, 5100, 5110, 5600, 5610, 5900, 6410, 6610, 7100, Replaces Ford OEM number C5NN3N652A, E27N3109A, E27N3110A, 81717388, 81717391, 81803198, 81803202, 87295840, O.D.: 1.625", I.D.: 1.498", Length: 2.0", (Item #: 146687) $8.80

Drag Link Assembly - A= 45.25 inch, B= 1.187 inch. For tractor models: Major, Super Major. Replaces 81717426, E1ADDN3304B, E1ADDN3304C. (Item #: 104576, Ref: E1ADDN3304B) $129.60

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Major, Power Major, Super Major (without original Ford pump with reservoir on top of pump). Replaces: AE33538A, E101LD9. (Item #: 111126, Ref: AE33538A) $12.60

King Pin Repair Kit - Fixes both spindles. For tractor models Major, Power Major, Super Major. (Item #: 178592, Ref: S.65737) $60.00

Rocker Shaft - For Ford tractor models Major, Power Major, Super Major, 2310, 2610, 2910, 3500, 3610, 3910, 4000, 4110, 4400, 4500, 4600, 4610, Compatible with Ford Construction and industrial models 233, 334, 335, 420, 535, Replaces Ford OEM number C9NN3575C, Replaces New Holland OEM number 81822292, (Item #: 161600) $178.00

Spindle, LH - Left hand spindle fits: Fordson Major, Power Major and Super Major. A=7.5 inch, B=1.5 inch, C=1.5 inch, D=0.87inch. (Item #: 104527, Ref: E1ADKN3108) $329.08

Spindle, LH, Front - This left side spindle has a vertical shaft measuring 7.750 inches, shaft diameter 1.50 inch, inner bearing land 1.75 inch, and outer bearing land 1.18 inch. For tractor models: FMD, Major, Power Major. Replaces E1ADKN3108, 81821186 (Item #: 104527, Ref: E1ADKN3106) $329.08

Spindle, RH - Right hand spindle fits: Fordson Major, Power Major and Super Major. A=7.5 inch, B=1.5 inch, C=1.5 inch, D=0.87 inch. (Item #: 104526, Ref: E1ADKN3107) $326.00

Steering Arm, LH - Left hand arm fits: Fordson Major, Power Major, Super Major. (Item #: 182849, Ref: E1ADKN3133B) $108.68

Steering Arm, RH - Right hand steering arm fits Fordson Major, Power Major and Super Major. (Item #: 179730, Ref: E1ADKN3132) $69.00

Steering Rocker Shaft Oil Seal - Oil Seal, Inner for Rocker Shaft. For tractor models 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, Major, Super Major. (Item #: 161601, Ref: DDN3539) $8.50

Steering Shaft - Shaft is 24 inches long. Fits: Fordson (Major, Power Major, Super Major from 1/1952 to 8/1958). (Item #: 179269, Ref: E1ADKN3524B) $83.98

Steering Shaft - Steering Shaft (25 7/8" LONG). Fits Fordson (Major 8/1958 to 12/1964), (Power Major and Super Major 8/1958-12/1965. (Item #: 170958, Ref: E1ADDN3524) $238.00

Steering Shaft Bearing - Bearing is for the upper and lower ends of the steering shaft. Verify measurements of .49 inches wide, 2.04 inches outside diameter and 1.18 inches inside diameter. For tractor models Major, Power Major, Super major. Replaces 353075S. (Item #: 169746, Ref: E1ADKN3556) $9.90

Steering Shaft Upper Bearing and Race - Use (1) 8N3571-OE and (1) 8N3552 This upper steering shaft bearing and race are for models Super Major, 2600, 2610, 3000 (1/65-8/68), 3600, 3610, 3910, 4100, 4110. Replaces C5NN3552A, C5NN3N615A, 8N3571, 8N3552 (Item #: 111857, Ref: C5NN3552A) $12.50

Steering Shaft and Nut Assembly - Overall length is 25 7/8 inches. For tractor models Major, Power Major, Super Major. (Item #: 170958, Ref: 81717457) $238.00

No
Picture
Steering Wheel - No Cap - For Ford tractor models Major, Super Major, Replaces Ford OEM number 81717476, E1ADKN3600A, 18" Diameter, 6 Spline, Steering Wheel That Includes Cap use Item #: 101423, (Item #: 101423) $47.80

Wheels

Front Wheel Rim 5.50 x 16 - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166) $70.00

Rear Axle Stud - This Rear Axle Stud connects the rear axle to the wheel center disc. It is used with C5NN1120E nut. 3/4 inch x 2 5/16 inch 16 (UNF) Thread. Replaces C5NN1N118J, C5NN1N118H, 81815740, 81815607, 81815739 (Item #: 115382, Ref: C5NN1N118H) $3.50

Wheel Bearing Kit - Complete for 1 wheel. For tractor models Major, Power Major, Super Major. Outer bearing is 1.181 inch ID, 2.838 inch OD, and .725 inch wide, inner bearing is 1.750 inch ID, 3.548 inch OD and .859 inch wide, and the Seal is 3.550 inch OD and 2.250 inch ID. Replaces OEM 81825779, E2158T9 (Item #: 104757, Ref: VPJ2201) $103.00

Wheel Nut - This Cone Wheel Nut is 3/4 - 16 Thread (UNF). It is used for the center disc to rear axle. It is used with C5NN1N118H Studs. Replaces 81816136, 81833776, C5NN1120E, D3NN1120B (Item #: 156987, Ref: C5NN1120E) $3.50

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $1.04

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.87

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.60

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $6.70

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $18.70

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Ford Super Major Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Ford Super Major Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford Super Major Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Ford Super Major Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Ford Super Major Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Ford Super Major Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.40

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $8.60

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $38.10

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2 inch L hole center to hole center, 2 1/2 inch wide, 1 1/8 inch thick (drawbar fits lift between lift arms). (Item #: 103174, Ref: 9N5182) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $20.40

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.58

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.30

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $20.80

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $117.34

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Item #: 112067, Ref: L601-14) $124.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $23.50

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $30.80

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $68.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $780.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $600.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $74.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $28.40

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $52.92

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $280.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $51.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $24.20

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $119.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $52.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $57.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $23.30

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.40

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $82.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $7.80

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $58.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $20.70

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $8.90

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.10

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $91.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $37.10

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

Seats

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $42.60

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $35.20

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.00

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $111.00