FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 420 Parts

Category: Clutch

[Categories] [All 420 Parts] [All John Deere Models]

Clutch Alignment Tool - Clutch alignment tool for 1 3/8 inch 10 spline disc and .67 inch pilot hole. For tractor models: M, MT, 320, 420, 330, 430, 440, 40, 40C, 40 Utility. Note, for .60 inch pilot hole, order ATLT130 (Item #: 119892, Ref: 1112-5996) $11.70

Clutch Alignment Tool - Clutch alignment tool for 1 3/8 inch 10 spline disc and .60 inch pilot hole. For tractor models: M, MT, 320, 420, 330, 430, 440, 40, 40C, 40 Utility. Note, for .67 inch pilot hole, use 1112-5996 (Item #: 185510, Ref: ATLT130) $3.00

Clutch Bearing - Release bearing for Models 1010, 2510, 2520, 3020, 40, 4000, 4010, 4020, 420 INDUST/CONST, 430 INDUST/CONST, 4320 COMPACT TRACTOR, 440 SKIDDER, 450 RIDING MOWER, 450B INDUST/CONST, 450C INDUST/CONST, 450D INDUST/CONST, 450E INDUST/CONST, 450G INDUST/CONST, 455, M, MT. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces AM3983T. (Item #: 107007, Ref: N1087) $21.00

Clutch Disc - 10", 1.375" spline diameter, 10 spline. For tractor models (320 SN# 321209 and up), 330, 40, 40C, (420, 430 up to SN# up to 99999), 435, 440, M, MT. Replaces AT141682, AM2577T. (Item #: 172284, Ref: AM2575T) $61.00

Clutch Disc - For John Deere tractor models 420, 430, 435, Replaces John Deere OEM number AM3404T, AT12159, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 17, Clutch Center: Solid, Clutch Type: Woven, (Item #: 122805) $200.00

Clutch Disc, Remanufactured - For John Deere tractor models M, MT, 40, 320, 330, 420, 430, 435, 440, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 205714) $95.01

No
Picture
Clutch Kit - For John Deere tractor models M, MT, 40, 320, 330, 420, 430, 435, Kit Includes: 6202-2RS, 6203-2RS, AT LT130, AT 5325, N1087, R2576, Clutch Diameter: 10", Clutch Hub Diameter: 1-1/4", Clutch Splines: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, Pressure Plate Size: 10", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Type: Single Stage, (Item #: 173363) $238.00

Clutch Kit, 10 Inch - This new single stage clutch kit includes a new pressure plate, a 10 inch, 10 spline, 1 3/8 inch hub, woven clutch disc. The release bearing (N1087), has an outside diameter of 3.500 inches, and inside diameter of 2.062 inches, and a thickness of .750 inches. This kit has two pilot bearings and two alignment tools (not shown) to accommodate different flywheels. The first pilot bearing (6202-2RS), has an outside diameter of 1.375 inches, and inside diameter of .590 inches, and a thickness of .470 inches. The second pilot bearing (6203-2RS), has an outside diameter of 1.574 inches, and inside diameter of .669 inches, and a thickness of .470. Used on tractors M, MI, MT, 320, 330, 435, 40, 420, 430, 440, MC. Replaces AM2575T, AM2576T, AM3983T (Item #: 173360, Ref: R2576NKIT) $191.00

Clutch Release Throw Out Bearing - Greaseable - Compatible with John Deere Tractor(s) M, MT, 40, 420, 430, 435, 1010, 2510, 2520, 3020, 4000, 4010, 4020, 4030, 4320. Replaces John Deere OEM nos AR41942, AM3983T, AR41794 (Item #: 113482) $19.10

Pilot Bearing - .6693" I.D. For tractor models 2840, (3010 synchro range), (3020 power shift and synchro range), (320 SN# 321209 and up), (3300 early), 40, (4000 power shift SN# 201000 and up), (4000, 4010 synchro range), 4020, 40C, (4230, 4240 power shift), 430, 4320, 435, 440, (4430 power shift SN# 022373 and up), 45, 4520, 4620, (4630, 4640, 4840 power shift), 5200, 5300, 5400, 55 single, 5500, (7020 synchro range), 830, 95, M, MT. Replaces CH12908, JD8504, JD8511, JD9281, JD9449 (Item #: 107933, Ref: C5NN7600A) $3.40

Pilot Bearing - I.D . .590", O.D. 1.375", Thickness .430". For tractor models 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Industrials: 300, 300B, 301, 302, 302A, 350, 350B, 401, 401B, 401C, 401D, 420, 430, 440, 440B, 450, 450C, 450D, 450E, 450G, 480A, 480B, 510, 540, 548B, 548D, 570, 640, 648D, 670. (Item #: 108447, Ref: AL10107) $1.80

Pilot Bearing - Measures .596 ID, 1.378 OD. For tractor models 300, 301, 400, 401, 1020, 2030 early, 420, 430, 435, 310, 450, 480, 1010, 1020, 2010, 2030 early, 320 early, 330, 40, 850. Replaces CH19289, AL24903, AL28037, JD10107, JD8511, JD9464 (Item #: 108447, Ref: JD8511) $1.80

Pressure Plate - 10", 3 lever. For tractor models G, M, MT, 105, 3300, 320, 330, 40, 45, 55, 95, 40C, (420, 430, SN# 99999 and below), 440. Replaces: AM227T, AM2576T, AM650T . (Item #: 162165, Ref: AM2576T) $126.00

Pressure Plate Assembly, Remanufactured, AM2576T - For John Deere tractor models M, 40, 320, 330, 420, 430, 435, 440, Replaces John Deere OEM number AM2576T, Pressure Plate Size: 10", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Type: Single Stage, (Item #: 204607) $113.01

Pressure Plate Assembly, Remanufactured, AT11853T - For John Deere tractor models 420, 430, 1010, Compatible with John Deere Construction and industrial models 40, 440, Replaces John Deere OEM number AT11853T, Pressure Plate Size: 8-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Type: Single Stage, (Item #: 205810) $120.01

No
Picture
Transmission Disc - For John Deere tractor models M, MT, 40, 420, 430, Compatible with John Deere Combine (s) 45 (s/n 35001-later), 55, 95, 105, 3300, Compatible with John Deere Construction and industrial models 440, Replaces John Deere OEM number AH64100, Size: 10", Hub Size: 1-3/8", Splines: 10, Center: Solid, Type: Woven, (Item #: 177013) $154.00

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $1969.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1119.01

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All 420 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy