FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 830 Parts

Category: Electrical System

[Categories] [All 830 Parts] [All John Deere Models]

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator - 12 volt, 35 amp. For tractor models 925, 930VU, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 940, (940 1980-84), 940V, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1040, (1130 1970-84), 1140F, 1140V, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1640, 1640F, (1830 1973-82), 1840, 1840F, (2020 1970-79), 2030, 2030OU, 2035, 2035EF, (2040 1976-82 with 164 dsl and 1979-85 with 152 dsl), 2040F, 2040S, (2120 1970-79), 2130, 2135, 2140, (2750 1983-86 with 239 dsl), (2840 1977-79 with 329 dsl), (2940 1980-84 with 359 dsl), (2950 1983-86 with 359 dsl), (3030 1979-82), 3130, 3135, 3140, (820 1968-72 with 3 cyl eng. and internal reg.), (830 1972-75 with 3 cyl), (920 1970-75), (930 1972-79), (1530 1974-75), (2150 1982-87 with 179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 179 dsl), (2350 1983-86 with 239 dsl). Replaces 0120339512, 0120339545. (Item #: 113331, Ref: ABO0208) $113.00

Alternator - 12 volt, 55 amp. For tractor models (1030 1970-82 with 2.7L dsl), (1130 1970-82), 1350, 1550, (1630 1973-82), 1750, 1750V, 1850, 1850F, 1850V, 1950, 1950F, 2155, 2250, 2250F, 2355, 2450, 2450F, (2555 1987-92 with 239 dsl), 2650, 2650F, (2750 1983-86 with 239 dsl), (2755 1987-92 with 239 dsl), (2840 1977-79 with 329 dsl), 2850, (2855N 1987-93 with 239 dsl), (2950 1983-86 with 359 dsl), (2955 1987-92 with 359 dsl), (3040 1980-84), 3050, (3150 1985-87 with 359 dsl), 3350, 3640, (830 1972-75 with 3 cyl eng.), 840, (930 1972-79), (2150 1982-87 with 179 dsl), (2155 1987-92 with 179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 179 dsl), (2350 1983-86 with 239 dsl), (2355 1986-92 with 239 dsl), (2550 1982-87 with 239 dsl). Replaces 0120488218, 0120488267, 0120488217. (Item #: 113332, Ref: ABO0198) $131.00

Ammeter, Black - Black ammeter for John Deere. Fits A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720 gas or diesel, 730 gas or diesel, 820, 830. Replaces AF2749R, AM1864T (Item #: 150259, Ref: 2348944) $28.70

Battery Cable - Battery Cables. 820 and 830 Mannhiem, 2020 and 2240 with swing batt. 1020, 1520 and 2020 with 41 and 71 amp. batt. 4 guage, length 25, terminal type 2-3+. For 1020, 1520, 2020, 2240, 820, 830 (Item #: 173478, Ref: TP-T21887) $25.90

Battery Strap - Battery Ground Straps. A to SN# 676000/up, B SN# 286910/up, G SN# 51143/up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 2 gauge, length 7 inches terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Item #: 115790, Ref: TP-AB4100R) $12.30

Condenser - Pony Motor Distributor - For John Deere tractor models 70, 80, 720, 730, 820, 830, Replaces John Deere OEM number X9263, Two required per engine, (Item #: 124003) $17.00

Distributor - Wico B-4 - For tractor models 70, 720, 730, 80, 820, 830 FOR PONY STARTING MOTOR ENGINE. Wico Model B-4 Distributor, complete, new. (Item #: 121924, Ref: AR1370R) $414.30

External Voltage Regulator - External Voltage Regulator. For Bosch System. For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2840, 3030, 3120, 3130, 820, 830 LOADER, 830 WINDROWER, 920, 930 All with Bosch system. Replaces 01160376, 01163008, 190601009. (Item #: 113314, Ref: AT31413) $24.20

No
Picture
Generator - Delco Style (9974), Remanufactured, Delco Remy, 1103021, AR11007 - For John Deere tractor models 80, 720, 730, 820, 830, Replaces John Deere OEM number AR11007, Replaces Delco Remy manufacturer number 1103021, Replaces manufacturer number 9974, 340-87, 92-01-3043, Delco Style, Voltage: 24, Rotation: Clockwise, Amperage: 10, Regulator: External, Additional Handling and Oversize Fees Apply To This Item, (Item #: 203523) $394.90

Governor Bearing and Race - For John Deere tractor models H, R, 80, 820, 830, 840 (2 cylinders only), Replaces John Deere OEM number JD7150, JD7151R, JD7152R, JD7153R, (Item #: 115159) $59.00

Ignition Key - Only - For John Deere tractor models A, AO, AR, B, G, 80, 420, 820 (2-Cylinder), 830 (2-Cylinder), 1010, 2010, 2510, 3010, 3020, 4010, 4020, 5010, 5020, 8020 Replaces John Deere OEM number A4700R, , Compatible with Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, Compatible with Massey Ferguson Construction and industrial models 200, Replaces Massey Ferguson OEM number 180292M1, 192427M1, (Item #: 121147) $3.10

Ignition Switch - This is a 12 volt, 20 amp, 4 position ignition switch used on multiple John Deere models. It has a 1.024" thread diameter. Replaces original part number AL35864. (Item #: 170186, Ref: AL35864) $29.40

Key Switch, 2 Terminal - With keys. For tractor models 420, (A from SN# 662874 and up), (AO, AR from SN# 275533 and up), (B from SN# 268820 and up), (G from SN# 46501 and up), 80, (820, 830 2-cylinders). Replaces A4699R, AA5592R, AB4063R, AB4087R. (Item #: 111037, Ref: AB4063R) $33.00

Point Set - Pony Motor Distributor - For John Deere tractor models 70, 80, 720, 730, 820, 830, For John Deere Magneto number X9021, Two required per engine, Sold individually, Gap points at 0.020", (Item #: 124002) $28.51

Push Button Starter Switch - 3 Terminal Push Button Starter Switch with Rubber Cap. Fits 80, 720, 730, 820 2 cylinder, 830 2 cylinder (with Pony start)530, 630, 730 (Gas, LP, All fuel. This starter switch has 5/8 - 32" thread O.D., 3 screw terminals. Switch is rate up to 36 volts. Replaces: AR21219, AR21823, AR20431, AR1324R (Item #: 121158, Ref: AR21219) $11.10

$John Deere 830 Push Button Starter\Horn Switch, Used$
Push Button Starter/Horn Switch, Used - For John Deere tractor models 530, 630, 730, 830, 2510, 2520, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4630, 4640, 4650, 4760, 4840, 4850, 4960, 5010, 5020, 6030, 7520, 8020, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 7700, Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, Replaces John Deere OEM number AR21823, For a new version of this item use Item #: 121158, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421158) $5.01

Solenoid Starter - Solenoid for starter AR70436 and other Bosch Starters. For tractors: 830 (3-cyl), 1530, 2030, 2040, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 6200, 6300, 6400, 6500. For 1530, 2030, 2040, 2240, 2840, 2940, 830. Replaces AL55046, AL117012, AL25268, SB-172, TX13149, VPF2213, VPF2219, AL25266, AL41524, AV103908, E9NN11390BA, F0NN11390AA. (Item #: 119940, Ref: TP-AL55046) $33.20

Solenoid, 6 Volt - 3 terminal, Delco starters 1107466, 1107474, 1107155. Replaces 1119799, DR1465 (Item #: 105670, Ref: 142364HA) $23.30

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H10, H10C, H10J, H11, H12, H8, H8J, RH10, RH12, RH8 spark plugs. For tractor models 320, 330, 420, 430, 820, 830. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type (Item #: 111743, Ref: AL295) $4.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter - 12 volt, 13 tooth, clockwise rotation. For tractor models 1133, (820 1968-72 with 3 cyl), (830 1972-75 with 3 cyl), 840, (920 1970-75), (1020 1965-73 with 152 dsl), (1520 1968-73 with 164 dsl), (1530 1974-75 with 164 dsl), (2020 1965-72 with 202 dsl), (2030 1971-75 with 219 dsl), (2040 1972-85 with 152 dsl), (2150 1982-87 with 3-179 dsl), (2155 1987-92 with 3-179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 3-179 dsl), (2350 1983-86 with 4-239 dsl), (2355 1986-92 with 4-239 dsl), (2550 1982-87 with 4-239 dsl), (880 1970-80 with 202 dsl), (270 1975-78 with 4-219 dsl), (2280 1975-85), (2320 1981-83 with 4-219 dsl), (2360 1984-93 dsl), (2420 1975-85 with 219 dsl). Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Item #: 156209, Ref: SND0044) $144.00

Starter - This is a new Bosch design starter. 12v, 10 tooth, Direct Drive Bosch type unit. 3.0KW, two (2) bolt mount. Uses AL55046 solenoid and AL25275 drive. Uses correct 13.5mm mounting hole diameter on DE. Fits multiple John Deere Tractors. Replaces; John Deere part numbers: AL110597, AR70436, AT23401, SE501411, SE501412, TY25290, TY25292, TY6720, TY6726, TY6780. (Item #: 109770, Ref: AR70436) $165.00

Starter - The length of this starter is 12.250 inches over all. Many of the models listed have a very tight space for the stater. This is a 12 volt, Delco style starter with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Item #: 113951, Ref: RE239087) $160.00

No
Picture
Starter - Delco Style (3798), Remanufactured, Delco Remy, 1113830, AR11073 - For John Deere tractor models 80, 720, 730, 820, 830, Compatible with John Deere Construction and industrial models 644B, Replaces John Deere OEM number AR11073, AR102776, Replaces Delco Remy manufacturer number 1113830, 1113801, Replaces manufacturer number 3798, Voltage: 24, Rotation: Clockwise, Teeth: 13, (Item #: 204401) $630.01

No
Picture
Starter - Delco Style DD (4063), Remanufactured, Delco Remy, 1107155, AR1203R - For John Deere tractor models 80, 720, 730, 820, 830, Replaces John Deere OEM number AR1203R, Replaces Delco Remy manufacturer number 1107155, Replaces manufacturer number 4063, 140-091, 91-01-3675, Delco Style: Direct Drive, Voltage: 6, Rotation: Clockwise, Teeth: 16, (Item #: 203429) $406.64

Starter Armature - Used with Delco Starter # 1107155, 1107424, 1107445 on John Deere (B with serial number 96000 to 200999), BO, BR, (70, 730, 80, 820, 830 with a pony start diesel). Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $93.58

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $64.00

Starter Solenoid - Used with AR70436 starter. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1640, 1830, 1840, 2020, 2030, 2120, 2130, 2140, 2250, 2450, 2940, 3030, 3040, 3120, 3130, 3140, 820, 830, 840, 920, 930, 940. Replaces AL113664. (Item #: 119940, Ref: AL25268) $33.20

Starter Solenoid - 2 bolt, Used with Bosch starters. For tractor models 1020, 1120, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, 920, (1530 engine SN# up to 152929), 820, 830. (Item #: 115851, Ref: AL19192) $39.30

Starter Switch, Keyed - This starter switch comes with 2 keys, has seven terminals on the back and is for models: 1020, 1030, 1120, 1130, 1630, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, 820, 830, 920, 930. Starter Switch replaces AR55721, AL16046. (Item #: 173332, Ref: AL19890) $31.10

Starter Switch, Used - For John Deere tractor models 820, 830, 920, 930, 940, 955, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2955, 3020, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester(s) 9900, Compatible with John Deere Construction and industrial models 300B, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM number AR58126, For a new version of this item use Item #: 156037, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456037) $9.01

Switch, Thermostart - For tractor models 1020, 1030, 1120, 1130, 1630, 1640, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2255, 2350, 2550, 2750, 2950, 3030, 3120, 3130, 820, 830, 920, 930. Replaces AL25064, AL36365. (Item #: 169994, Ref: AL62707) $24.20

Tune-up Kit - For Pony Engine With Foreign Coils Contains Points, Condensor, universal Plug Wires and Coil. Consists of: 2 Point Sets, 2 Condensers, 2 Plug Wire Sets, and 2 Foreign Ignition Coils (Item #: 109868, Ref: R2531) $223.00

Voltage Regulator - Voltage Regulator, (6 Volt). Fits 720, 730, 820, 830 tractors (Item #: 105284, Ref: 1118786) $33.00

Voltage Regulator, 12 Volt - Voltage Regulator, (12 Volt). For Motorola Alternator R3JD1B, AR40420. Fits JD24, JD310, JD500, JD600, JD760A, 2250, 2270, 2280, 2320, 2420, 2510, 2520, 3020, 310A, 310B, 3430, 3830, 4000, 4020, 410, 410B, 4320, 4520, 4620, 500C, 5010, 5020, 510, 510B, 5200, 5400, 5400, 6030, 610B, 710B, 710C, 7520, 830. (410C, 510C, 610 All <-736175, JD550A, SN<-123113, (210C, 315C, 482C All SN# <-736175) RED - ISO DIODE (+); BLACK - GROUND; GREEN - FIELD. Regulator for diesel and gas applications. Replaces AR38459, AR78298 (Item #: 105708, Ref: AR78298) $31.10

Voltage Regulator, 24 Volt - Used on 24-Volt systems using Delco generator # 1103021 and 1103026. 3010, 4010, (3020 Diesel up to Serial Number 122999), (4020 Diesel up to Serial Number 200999), (500 Diesel up to Serial Number 67999), 5010, (600 Diesel up to Serial Number 90999), (720 Electric start diesel Serial Number 7222600 and up), (730 Electric start diesel), (830 2 cylinder Electric start), (840 Electric start up to Serial Number 8400199) Replaces: 1118292, 1118347, 1118957, 1119282, AR11008, AR30155 Flat Mount. For 24-Volt generator system, 4 terminals, 8 - 12 AMPS, works on negative or positive polarity (Item #: 105546, Ref: TP-AR30155) $182.51

Universal Parts and Accessories
Category: Electrical System

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Item #: 114088, Ref: 2348258) $49.80

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Battery Hold Down - For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Item #: 104047, Ref: NCA10718A) $13.60

Battery Hold Down J-Bolts, Pair - This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Item #: 125150, Ref: 393161R1) $9.00

Battery Joining Cable - This cable is 2 gauge measuring 10 inches. (Item #: B204) $18.75

Battery Joining Cable - This cable is 2 gauge measuring 18 inches. (Item #: B207) $21.00

Battery Joining Cable - The cable is 2/0 gauge measuring 18 inches. (Item #: B1937) $36.00

Battery Joining cable - The cable is 2/0 gauge measuring 12 inches (Item #: 186350, Ref: B1936) $40.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 12 inches. (Item #: 183882, Ref: B1931) $33.30

Battery to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: B1932) $25.50

Battery to Starter Cable - This cable is 2/0 gauge measuring 36 inches (Item #: 184665, Ref: B1934) $53.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 48 inches. (Item #: 117381, Ref: B1935) $34.70

Cable, Battery to Starter - This cable is 2 gauge measuring 8 inches. (Item #: 184847, Ref: B188) $16.60

Cable, Battery to Starter - This cable is 2 gauge measuring 12 inches. (Item #: 184028, Ref: B189) $15.10

Cable, Battery to Starter - This cable is 2 gauge measuring 18 inches. (Item #: 184391, Ref: B190) $19.80

Cable, Battery to Starter - This cable is 2 gauge measuring 36 inches. (Item #: 184406, Ref: B192) $24.60

Cable, Battery to Starter - This cable is 2 gauge measuring 48 inches. (Item #: 173479, Ref: B227) $37.50

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Item #: 140520, Ref: D5TE12029AB) $16.20

Coil Bracket - Universal Coil Bracket (Item #: 107072, Ref: R1940) $6.10

Coil, 12 Volt with Resistance - This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Item #: 105299, Ref: 189673M1) $18.50

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 192483, Ref: 40611) $70.00

Coil, High Performance (Black), 12 Volt, Oil Filled - Heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 105092, Ref: 40511) $38.00

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Item #: 182566, Ref: 40111) $69.00

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Item #: 125199, Ref: 40011) $29.00

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Item #: 182567, Ref: 40601) $79.00

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 182550, Ref: 40501) $71.00

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Item #: 182585, Ref: 40001) $31.98

Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 183385, Ref: 45111) $83.00

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 108304, Ref: 45011) $22.90

Coil, Ultra High Performance (Chrome), Oil Filled - Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 182456, Ref: 45001) $73.00

No
Picture
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Item #: 111468, Ref: 1904376) $14.40

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. This is as a universal part, please verify measurements before ordering. (Item #: 172973, Ref: R52159) $18.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4-inch reach. Replace Autolite AL65. OEM 834236M1 and 157803A. NOTE: Verify spark plug type before ordering. (Item #: 172892, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Item #: 130074, Ref: AL3076) $10.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. Copper core. (Item #: 107985, Ref: S2097) $19.70

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems. (Item #: 108070, Ref: CPN12259EI) $20.00

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (�Mag Wire�) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Item #: 178803, Ref: S66465) $30.80

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Item #: 103156, Ref: SWS260) $20.30

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Item #: 103155, Ref: CPN12259) $16.60

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Switch to Starter Cable - This cable is 2 gauge measuring 18 inches. (Item #: 184822, Ref: B194) $16.40

Switch to Starter Cable - This cable is 2 gauge measuring 24 inches. (Item #: 185368, Ref: B195) $15.10

Switch to Starter Cable - This cable is 2 gauge measuring 36 inches. (Item #: B196) $21.00

Switch to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: 185109, Ref: B1938) $38.50

Switch to Starter Cable - This cable is 2/0 gauge measuring 24 inches. (Item #: 134614, Ref: B1939) $43.70

Switch to Starter Cable - This cable is 2/0 gauge measuring 36 inches. (Item #: 184663, Ref: B1940) $56.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

$John Deere 830 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories] [All 830 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy