FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2130 Parts

Category: Fuel System / Air Intake

[Categories] [All 2130 Parts] [All John Deere Models]

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794) $8.20

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Item #: 121925, Ref: T23262) $6.30

Air Cleaner Hose, Suction - A= 2.75", B=2.00". For tractor models 1020, 1030, 1120, 1130, 1530, 1630, (1830, 2030 SN# 115792 TO 292145), (2040 SN# UP TO 349999), (2130 SN# 115792 TO 292145), (2240 SN# UP TO 349999), 820, 920, 830, 930. (Item #: 172346, Ref: L29373) $22.90

Air Filter, Inner - For tractor models (1020, 1030, 1120, 1130, 1630, 2020, 830, 930 SN# 190320 and up), (1040, 1140, 1640, 1840, 2040, 2040S, 2120, (1350, 1550, 1750, 1850, 1850N SN# up to 621999), 1830, 2030, 2130 SN# 115792 and up). (Item #: 114333, Ref: AE31724) $28.10

Air Filter, Outer - For tractor models (1020, 1030, 1120, 1130, 1630, 2020, 830, 930 SN# 190320 and up), (1040, 1140, 1640, 1840, 2040, 2040S, 2120, (1350, 1550, 1750, 1850, 1850N SN# up to 621999), 1830, 2030, 2130 SN# 115792 and up). (Item #: 114332, Ref: AR84228) $36.70

Air Filter, Single - Fits the following tractors using a single air filter: (1020, 1030, 1120, 1130, 1630, 2020, 2120, 830, 930 All with SN# greater than 115792), (1830, 2030, 2130 All with SN# less than 115791). (Item #: 123198, Ref: AT20728) $26.70

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

Fuel Injector - Nozzle, Injector. Pencil-type injector For tractor models 840, 940, 1020, 1030, 1040, 1129, 1139, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2840, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3350, 3640, 4020. Replaces: AT25502, AT30299, AR49877, AR56290, AR73673, AR88239, AT18064, SE500822, SE500823, ROOSA # 22202. (Item #: 113965, Ref: AR89564) $32.00

Fuel Injector, Remanufactured, AR49877, AR73673, AR88236, AR88239, AR89563, AR89564 - For John Deere tractor models 820, 830, 940, 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2020, 2030, 2040, 2130, 2150, 2155, 2255, 2320, 2350, 2355, 2355N, 2440, 2520, 2530, 2535, 2550, 2555, 2730, 2735, 2840, 2940, 2950, 2955, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3330, 3350, 3530, 4020, 4030, 4530, 5300, Compatible with John Deere Combine (s) 1075, 2240, 3300, 4400, 4420, 4435, 6600, Compatible with John Deere Harvester (s) 5200, 5400, 7440, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 210, 210C, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315, 315C, 350, 350B, 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 410, 410B, 440, 440A, 440B, 444, 444C, 444CH, 444D, 444E, 444H, 450, 450B, 450C, 450D, 450G, 455D, 455G, 480, 480A, 480B, 480C, 482C, 540, 540A, 544, 544A, 550G, 555G, 570, 570A, 610, 610B, 650G, 710, 710B, 710C, Compatible with John Deere Hay Cutting (s) 2270, 2280, 2420, 3430, Replaces John Deere OEM number AR49877, AR73673, AR88236, AR88239, AR89563, AR89564, SE500822, SE501099, 22202, 27333, For a New version of this sku use Item #: 113965, (Item #: 210575) $107.01

No
Picture
Fuel Line Clamp, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2240 (s/n 349999-earlier), 2355, 2510, 2555, 3020, 3030, 3040, 3055, 3120, 3130, 3140, 3155, 3255, 4000 (s/n 201000-later), 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4630, 4640, 4840, 5020, 6030, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine(s) 4425, 4435, 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 484, 5200, 5400, 5440, 5460, 5720, 5820, 7440, 7445, 7450, 7455, 9910, 9920, 9930, 9940, 9950, Compatible with John Deere Hay Cutting(s) 800, 830, 2250, 2270, 2320, 2420, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, 6700, Replaces John Deere OEM nos R34766, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448132) $1.51

Fuel Return Tee - This Tee sits on top of the injector and connects to the diesel return line. (Item #: 176360, Ref: AT27622) $12.40

Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656) $13.60

Fuel Shutoff Cable - For John Deere tractor models 940, 1040, 1140, 1640 (With cab, s/n 429999-earlier), 1840 (Without cab), 2030 (Without cab), 2040 (With cab, s/n 429999-earlier), 2130 (Without cab), 2140 (With cab, s/n 429999-earlier), 2150, 2155, 2255, 2350 (Without cab), 2355 (Without cab), 2355, 2355N, 2550 (Without cab), 2555 (Without cab), 2750 (Without cab), 2755 (Without cab), 2840 (s/n ending in "T"), 2855, 2940 (Without cab), 2950 (Without cab), 2955 (Without cab), 3030 (Without cab), 3040 (With cab, s/n 429999-earlier), 3055, 3130 (Without cab), 3140 (With cab, s/n 429999-earlier), 3155 (With lucas or roto pump), 3255, 4030, 4230, 4430 (s/n 017499-earlier), 4630 (s/n 383898-earlier), 4840, 8430, 8440, 8630, 8640, Replaces John Deere OEM number AL120054, AL16327, AL16817, AL28976, AL36900, AL36901, AL36902, AL36921, AL38885, AL38886, AL41425, AL58239, AL58240, AL58243, AL58247, AL58248, AL58528, AT25387, AT29305, AL36924, For Diesel only, Overall Length: 83", Mount to Mount: 77", (Item #: 152818) $20.80

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $15.00

Manifold Heater - Thermostart Intake Manifold Heater Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: AAU8491, AR63103, 47P606 (Item #: 118792, Ref: 3583543M2) $11.80

No
Picture
Precleaner Assembly - For 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2250, 2450, 2650, 840, 940. Precleaner Assembly. 6.89" Bowl Diameter 2.953" Inlet Diameter 4.921" Body Height. (Item #: 123120, Ref: AL39934) $29.80

Sending Unit, Fuel - Sending Unit, fuel (spade type terminals). For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830 (serial number <294961), 2030 (serial number <294961), 2130 (serial number <294961), 2140, 2240 (serial number <349999), 2840, 3030, 3130, 820 (3 cylinder), 830 (3 cylinder), 920, 930. Replaces AT31619. (Item #: 114952, Ref: AT31619) $40.00

Universal Parts and Accessories
Category: Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72) $18.80

No
Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49) $15.80

Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500) $120.00

$John Deere 2130 Fuel Filter Kit, In-Line, 5\16 inch$
Fuel Filter Kit, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. Contains: Filter, 2 - hoses, 4 - clamps. (Item #: 119295, Ref: BF840) $6.40

$John Deere 2130 Fuel Filter, In-Line, 1\4 inch$
Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Item #: 119294, Ref: 6511393) $8.80

$John Deere 2130 Fuel Filter, In-Line, 3\8 inch$
Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Item #: 120082, Ref: BF836) $7.92

$John Deere 2130 Fuel Filter, In-Line, 5\16 inch, Clear$
Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Item #: 110863, Ref: BF7736) $4.90

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043) $70.00

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259) $109.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494) $5.20

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003) $13.30

Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622) $57.00

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397) $20.50

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A) $33.40

Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23) $94.68

Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5) $137.82

$John Deere 2130 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP) $11.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories] [All 2130 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy