Adapter - Adaptor Pin and Bushing, adapts top link TP-AR34208 to tractors: 520, 530, 620, 630, 720, 730, 3010, 4010. Pin 4" usable length, 3/4" diameter, bushing .90" outer diameter, .765", inner diameter 1.750" long. For 3010, 4010, 520, 530, 620, 630, 720, 730. (Item #: 112555, Ref: TP-AR34208AK)$10.50
Center Link Body Only - For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4020 (s/n 201000-later), 4030, 4230, 4520, 5010, 5020, Replaces John Deere OEM number R47524, R26811, Length: 10.75", Thread: 1.250"- 7, UNC LH/RH, (Item #: 170288)$104.00
Center Link End - For John Deere tractor models 3010, 4010, Replaces John Deere OEM number AR26527, 1-1/4" x 7 Left Hand Thread, (Item #: 170515)$115.00
Center Link Handle - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number R42495, R27007, (Item #: 164548)$6.98
Draft Arm Tube - Right Hand, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4030, Compatible with John Deere Construction and industrial models 500, 500A (s/n 123113-earlier), Replaces John Deere OEM number AR32547, AR27241, Right Hand, For a new version of this item use Item #: 110986, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410986)$164.01
Draft Arm Tube, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4030, Compatible with John Deere Construction and industrial models 500, 500A (s/n 123113-earlier), Replaces John Deere OEM number AR32548, AR27242, Left Hand, For a new version of this item use Item #: 110985, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410985)$158.01
Drawbar - For John Deere tractor models 2510 (Row-Crop), 2520 (Row-Crop), 3010, Replaces John Deere OEM number R27692, 45.00" long, 2.00" Wide, 1.25" Thick, 1.875" Offset, Four .765" diameter holes @ 1.440", 2.440", 7.440" and 12.690" from front, (Item #: 112181)$195.00
Drawbar Pin, Front - Used on John Deere 2510 Row Crop, 2520 Row Crop and 3010 tractors, the diameter of this pin is 0.750 inches. Replaces John Deere part number AR26415 (Item #: 128126, Ref: AR26415)$47.00
Drawbar Pin, Front - Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Item #: 121853, Ref: R56728)$19.70
Drawbar, Offset - 2.50" Offset. Size is 1.250" x 2.50" x 44.750" Bar has 1.010" Holes at 1.060 and 2.310 and 4.360 and 7.050 and 9.050 and 12.30 inches. For 2510 Hi-Crop, Row Crop Wide Swing, 2520 Hi-Crop, Row Crop Wide Swing, 3010 Row Crop, Std Wide Swing, 3020 Rop Crop, Orchard, 4000 Hi-Crop, 4010 Row Crop, 4010 Row Crop with Wide Swing, 4020 Hi-Crop, 4030 Row Crop. *An additional $10 shipping charge applies due to weight/size. (Item #: 110260, Ref: RE20662)$161.00
Drawbar, Used - For John Deere tractor models 2510 (Row-Crop), 2520 (Row-Crop), 3010, Replaces John Deere OEM number R27692, 45.00" long, 2.00" Wide, 1.25" Thick, 1.875" Offset, Four .765" diameter holes @ 1.440", 2.440", 7.440" and 12.690" from front, For a new version of this item use Item #: 112181, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412181)$103.01
Drawbar, Used - For John Deere tractor models 2510 (Row Crop Wide-Swing), 2520 (Row Crop Wide-Swing), 3010 (Row Crop Wide-Swing), 3020 (Row Crop Wide-Swing), 4010 (Row Crop Wide-Swing), 4020, 4030 (Row Crop), Replaces John Deere OEM number R28057, R34288, RE20662, Length: 44.750", Width: 2-1/2", Thickness: 1.250", Offset: 2.50", For a new version of this item use Item #: 110260, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410260)$91.80
Front Drawbar Dowel Pin - This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121851, Ref: R26503)$7.10
No Picture
Front Drawbar Dowel Pin, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R56728, Overall Length: 3.307", Shank Length: 2.323", Diameter: 1.25", Shank Diameter: 1", For a new version of this item use Item #: 121853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435795)$11.51
Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438)$7.30
No Picture
Front Drawbar Support, Used - For John Deere tractor model 3010, Replaces John Deere OEM nos AR31276, Replaces John Deere Casting nos R32179, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 487649)$176.01
Front Pull Arm Pin, Used - For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, For a new version of this item use Item #: 114090, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435641)$7.01
Front Pull Arm, LH - Left Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Item #: 110985, Ref: AR32548)$273.00
Front Pull Arm, RH - Right Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Item #: 110986, Ref: AR32547)$329.00
Hydraulic Cylinder Hanger, LH, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 5020, Replaces John Deere OEM nos R32118, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498953)$20.01
Leveling Link Adjusting Shaft - Used on John Deere 2010, 2510, 3010, 3020, 4010, 4020, 600, this part replaces John Deere part number T13859 (Item #: 111630)$55.00
Lift Arm Adjusting Handle - Used on John Deere 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. This part replaces T13858 (Item #: 110130)$25.30
Lift Link Knuckle - Used on John Deere Tractor 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. Replaces AR26691, Marked R26612 (Item #: 121856, Ref: AR26691)$65.00
Lift Link Rod - Rod is 25 5/8 inches in length. For 2510, 3010, 3020, 4010, 4020, 600. Verify length needed. (Item #: 110577, Ref: R26611)$85.00
No Picture
Lift Link Rod - For tractor models 3010, 3020, 4010, (4020 up To S#200999). (Item #: 110577, Ref: R3115)$85.00
Lift Link Seal - For John Deere tractor models 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Replaces John Deere OEM number AR26616, Inside Diameter; 1", Outside Diameter: 1.503", (Item #: 110138)$7.60
Lift Link, Adjustable - Works on either RH or LH side. For tractor models 3010, 3020, 4010, (4020 SN# up to 200999). (Item #: 110250, Ref: AR44555)$501.00
No Picture
Load Control Shaft - Shaft is 20.937 inches long and 1 inch diameter. For tractor models 500, 2510, 2520, 3010, 3020, 4030. (Item #: 128555, Ref: R33883)$103.00
No Picture
Load Control Shaft Bushing - Bushing with O-Ring. For tractor models 500, 2510, 2520, 3010, 3020, 4030. Also available in oversizes .003, .006 and .030. State size required in comments section of order form if oversize is required. 2 required per tractor. (Item #: 113995, Ref: R27018_)$16.40
Load Control Shaft Retainer - For John Deere tractor models 2510, 3010 (s/n 049999-earlier), 3020 (s/n 122999-earlier), Compatible with John Deere Construction and industrial models 500, 500A, Replaces John Deere OEM number R33884, R28125, (Item #: 167359)$24.10
Load Control Shaft Seal - 2 Seals required per tractor. For tractor models 500, 2510, 2520, 3010, 3020, 4030 (Item #: 115050, Ref: AR27371)$6.40
Load Control Shaft, Used - For John Deere tractor models 500, 600, 2510, 3010 (s/n 049999-earlier), 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier), Replaces John Deere OEM nos R26630, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444803)$32.01
Load Control Shaft, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4030, Compatible with John Deere Construction and industrial models 500, Replaces John Deere OEM number R33883, R27017, For a new version of this item use Item #: 128555, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435942)$58.51
Load Control Shims - For John Deere tractor models 2510, 2520, 3010, 3020, 4030, Compatible with John Deere Construction and industrial models 500, 500A, 500C, Replaces John Deere OEM number R66425, (Item #: 140546)$19.30
Lower Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121852, Ref: R40558)$8.70
Lower Lift Link Housing Yoke - For John Deere tractor models 2510, 3010, 3020 (Early), 4010, 4020 (Early), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R26615, (Item #: 110512)$142.00
Lower Lift Link Pin - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030 (s/n 6719-earlier), 4230 (s/n 13087-earlier), 4320, 4430 (s/n 17613-earlier), 4455, Replaces John Deere OEM number R54170, R26618, (Item #: 164340)$7.20
Pin, Drawbar, Front - For John Deere tractor models 2510 (Row Crop), 2520 (Row Crop), 3010 (Row Crop, Standard, Row Crop Utility, Orchard), Replaces John Deere OEM number AR38256, For Regular Drawbar, Not Swinging, Diameter Hole: .75", (Item #: 170305)$1.98
Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 and 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Item #: 108900, Ref: AR28570)$155.00
Rockshaft Arm Bushing - For John Deere tractor models 2010 (s/n 29001-later), 2510, 3010, 3020, 4010, 4020, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R26619, (Item #: 168631)$6.50
Rockshaft Control Cable - For tractor models 2510, 3010 and early 3020 before SN# 122999. (Item #: 114691, Ref: AR26810)$80.00
Rockshaft, Used - For John Deere tractor models 600, 2420, 2520, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4030, 4230, 4320, 4430, Replaces John Deere OEM nos R34487, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433683)$95.01
No Picture
Sway Block - Left Hand For 3010 (Item #: 108932, Ref: R3135)$131.00
No Picture
Sway Block - Right Hand For 3010 (Item #: 108931, Ref: R3136)$123.00
Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R)$12.00
Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R)$1.50
Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R)$1.40
Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R)$2.70
Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716)$0.80
Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R)$0.70
Top Link Assembly - For John Deere tractor models 3010, 4010, Replaces John Deere OEM number AR30830, 1-1/4" x 7 Right Hand Thread, Contains items to replace R47524, AR46298, AR26527, (Item #: 111266)$260.00
Top Link Bracket - For tractor models 3010, 4010. (Item #: 110134, Ref: R27803)$127.00
Top Link End - Used on John Deere models: 500, 500A below serial number 123113, 600, 2510, 2520 Row Crop, 3010 below serial number 049999, 3020, 4000 serial number 201000 and up, 4010, 4020, 4030, 4230. 15.250 inches long with 1.250 inch Right Hand thread. Uses F2680R Cat I ball or F2681R Cat II ball, not included. Replaces AR46298, R26813. (Item #: 110204, Ref: AR46298)$99.00
Top Link Pin - Quick Lock - For John Deere tractor models 2010, 2520, 3010, 3020, 4010, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 7200, 7210, 7400, 7410, 7510, Replaces John Deere OEM number RE56991, AR39784, AR67881, Catagory II, Quick Lock Top Link Pin, (Item #: 153787)$27.60
Toplink Transfer Hook - S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Item #: 114007, Ref: R53762)$5.90
Upper Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.283 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 114099, Ref: R40557)$6.40
Universal Parts and Accessories Category: Hitch / Drawbar
Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560)$1.90
Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A)$8.90
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123)$60.00
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009)$41.00
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196)$50.00
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126)$58.00
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155)$58.00
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134)$139.00
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394)$100.00
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156)$95.30
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081)$105.00
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139)$300.00
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X)$11.50
Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152)$33.00
Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04)$2.70
Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14)$1.20
Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91)$1.30
Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316)$1.10
Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332)$44.00
Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324)$40.00
Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326)$74.00
Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328)$60.00
Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330)$63.00
Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322)$65.00
Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1)$42.00
Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168)$358.00
Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465)$106.00
Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101)$337.00
Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1)$22.60
Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350)$27.30
Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH)$64.00
Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232)$28.00
Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91)$26.90
Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29)$26.60
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2)$37.00
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
