FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 4450 Parts

Category: Hitch / Drawbar

[Categories] [All 4450 Parts] [All John Deere Models]

Center Link Assembly (Cat III) - Consisting of the following items: (1) R80052, (1) RE56211, (1) AR74181 and (1) R66297. This Category III top link assembly is used on John Deere 4250, 4255, 4440 serial number 013167 and up, 4450, 4455 (Item #: 126892, Ref: AR34210) $260.00

Center Link Bracket, Used - For John Deere tractor models 4250, 4255, 4440, 4450, 4455, Replaces John Deere OEM nos R60766, Pin Hole Diameter: 1 1/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497128) $75.01

Center Link End, Tractor Side - Used on John Deere models: 4250, 4255, 4440, 4450, 4455. This Top Link end is used on the tractor side. It has a 1.268 inch pin hole and 1.375 inch 8 Left Hand Tread. Replaces AR74181, AL39749. (Item #: 170272, Ref: AR74181) $198.58

Drawbar - This Drawbar has a 2 inch offset. It is 45.625 inches long, 3.000 inches wide and 1.500 inches high. Holes are 1.031 inches in diameter and are located at 1.656, 2.963, 5.532 and 8.581 inches from the front. It replaces original John Deere part number R61184. (Item #: 108946, Ref: R61184) $180.00

No
Picture
Drawbar - 2 Offset 1.50 x 3 x 45.625 1.031 Holes at 1.656, 2.963, 5.532, and 8.581 For tractor models 4050, 4050 Hi-Crop, 4055 with Cat II, 4240, 4250, 4250 Hi-Crop, 4255 with Cat III, 4440, 4450 with Wide Swing. (Item #: 108946, Ref: R3100) $180.00

Drawbar Hammerstrap - The Hammerstrap is used with R36608, R50984, R61184, R51771 Drawbars. It Replaces�RE19375, AR35912, AR74170, AR35912 (Item #: 109529, Ref: R78214) $113.00

Drawbar Hammerstrap - For John Deere tractor models 4050 (Hi Crop), 4250 (Hi Crop), 4450, 4455, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (From S/N 25000), 6030, 7020, 7520, 8430, 8630, Replaces John Deere OEM number R80447, AR53877, RE19377, 2" Drawbar opening, For 1-3/8" Drawbar Pin, Used with R50984 or R62081 Drawbars, (Item #: 109693) $111.00

Drawbar Hammerstrap Pin - T-Shaped Pin measures 6.181 inches long and 1.248 inch diameter. Also replaces AR937R. For tractor models using this pin: 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555. (Item #: 128172, Ref: AR69988) $21.50

Drawbar Pin, Front - Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Item #: 121853, Ref: R56728) $19.70

Drawbar Rear Support Bracket LH - Used on John Deere 4055, 4250, 4255, 4350, 4440, 4450, 4455. Replaces John Deere part numbers AR96600, R64749, John Deere Casting number R72870. Includes pins. (Item #: 180480, Ref: AR96600) $205.00

Drawbar Rear Support Bracket RH - Used on John Deere 4055, 4250, 4255, 4350, 4440, 4450, 4455. Fits John Deere Tractor (s) 4055, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere part numbers AR96599, R64750. John Deere Casting number R72869. Pins included. (Item #: 180478, Ref: AR96599) $203.00

Drawbar Support Spacer - Used on John Deere Tractors 4050, 4055 with Regular Drawbar, 4250 with Cat 3 Narrow, 4255 with Regular or Cat 3 Narrow Drawbar, 4440 with Regular Drawbar, 4450 with Cat 3 Narrow, 4455 with Cat 3 Narrow. (Item #: 110118, Ref: R64753) $27.60

Front Drawbar Dowel Pin - This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121851, Ref: R26503) $3.98

No
Picture
Front Drawbar Dowel Pin, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R56728, Overall Length: 3.307", Shank Length: 2.323", Diameter: 1.25", Shank Diameter: 1", For a new version of this item use Item #: 121853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435795) $10.01

Front Drawbar Support - For John Deere tractor models 4055, 4250, 4255, 4450, 4455, Replaces John Deere OEM number RE21317, AR93599, Replaces John Deere Casting number R82338, R82339, (Item #: 161246) $840.00

Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438) $3.98

Front Pull Arm Washer - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, (Item #: 121442) $14.30

No
Picture
Front Pull Arm Washer, Used - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, For a new version of this item use Item #: 121442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435774) $8.26

Handle - For John Deere tractor models 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3640, 4040, 4050, 4055, 4240, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM number R66297, (Item #: 170295) $15.20

Lift Link Assembly, Used - For John Deere tractor models 4050, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4755, 4760, 4840, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos AR78526, R106408, R117872, R54614, R58934, R61253, RE44555, RE50532, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497240) $176.01

Load Control Arm Support, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R51195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431755) $25.01

No
Picture
Load Control Shaft - For John Deere tractor models 4040S, 4050, 4055, 4240S, 4250, 4255, 4350, 4450, 4455, Replaces John Deere OEM number R71375, Length: 24.250", Diameter: 1.186", Additional Handling and Oversize Fees Apply To This Item, (Item #: 123288) $146.00

Load Control Shaft Seal - For John Deere tractor models 4040, 4040S, 4050, 4055, 4240, 4240S, 4250, 4255, 4350, 4450, 4455, Replaces John Deere OEM number R79779, R78733, Sold Individually, (Item #: 123289) $3.10

Lower Drawbar Support Plate - For John Deere tractor models 4055 (with Regular Drawbar), 4250 (with Cat 3 Narrow), 4255 (with Regular or Cat 3 Narrow Drawbar), 4440 (with Regular Drawbar), 4450 (with Cat 3 Narrow), 4455 (with Cat 3 Narrow), Replaces John Deere OEM number R64751, Thickness: 3/4", Width: 3", Length: 15-3/4", (Item #: 110117) $61.00

Lower Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121852, Ref: R40558) $8.40

Pin, Pull Arm - For John Deere tractor models 4250 (Rear), 4255 (Rear), 4440 (Rear), 4450 (Rear), 4555 (Rear), Replaces John Deere OEM number AR70865, (Item #: 170307) $53.00

No
Picture
Rear Drawbar Support Pin - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM number R65530, Used to Stabilize Swinging Drawbar, (Item #: 171607) $11.90

Straight Drawbar - For John Deere tractor models 4050, 4055, 4240, 4240S, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM number R61184SPL, Length: 45.620", Width: 3.00", Thickness: 1.500", Additional Handling and Oversize Fees Apply To This Item, (Item #: 165077) $332.00

Sway Block - Right Hand, Used - For John Deere tractor models 4050, 4055, 4250, 4255, 4440, 4450, 4455, Replaces John Deere OEM number R61254, R104901, Right Hand, For a new version of this item use Item #: 410812, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410812) $81.60

Sway Block Support Bracket - Right Hand, Used - For John Deere tractor models 4055, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM nos AR96599, R64750, Replaces John Deere Casting nos R72869, Right Hand, Car III Narrow, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497632) $117.01

Sway Block Support Bracket, LH, Used - For John Deere tractor models 4055, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM nos AR96600, R64749, Replaces John Deere Casting nos R72870, Left Hand, Car III Narrow, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497633) $95.01

Toplink Transfer Hook - S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Item #: 114007, Ref: R53762) $5.10

Upper Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.283 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 114099, Ref: R40557) $6.50

Universal Parts and Accessories
Category: Hitch / Drawbar

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $8.90

$John Deere 4450 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $60.00

$John Deere 4450 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $40.40

$John Deere 4450 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$John Deere 4450 Drawbar, Universal Cat I, 30-1\8 Inch$
Drawbar, Universal Cat I, 30-1/8 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $44.30

$John Deere 4450 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $58.00

$John Deere 4450 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $58.00

$John Deere 4450 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $138.00

$John Deere 4450 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $99.00

$John Deere 4450 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $71.00

$John Deere 4450 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $104.00

$John Deere 4450 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $298.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $47.71

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.20

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.10

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $43.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $39.30

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $58.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $60.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $63.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $64.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $38.10

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $335.41

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $328.58

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $21.50

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $28.00

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $97.32

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.50

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $26.10

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All 4450 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy