FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 4630 Parts

Category: Hitch / Drawbar

[Categories] [All 4630 Parts] [All John Deere Models]

Cable - Shift Control, AR54617 - For John Deere tractor model 4630 (with Power Shift Transmission), Replaces John Deere OEM number AR54617, Length: 47-1/2", (Item #: 162037) $98.00

Cat III Top Link - For tractor models 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8650. Assembly consists of the following items: (1) RE44561, (1) RE44559, (1) RE50533 and (1) R64084 This part adjusts from 26.50 to 38 inches center to center on the pins. This assembly requires a 1.250 inch pin, not included. Replaces original part numbers AR78229, AR93043 and RE44558 (Item #: 102074, Ref: R0710) $235.00

No
Picture
Center Link Assembly - For tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8200, 8300, 8400, 8440, 8450, 8640, 8650. (Item #: 102074, Ref: RE44558) $235.00

Center Link Body - Part number R47067 measures 10.750 inches long. It has 1.375 inch -8 thread. Left hand thread on one side, right hand thread on the other. Used on John Deere: 4000 Serial Number 250001 and up, 4020 Serial Number 250001 and up, 4230 HI-CROP, 4320, 4430 HI-CROP, 4440 Serial Number 013166 and below, 4520 Serial Number 010019 and up, 4620, 4630 Serial Number 030390 and below, 5020 Serial Number 028137 and up, 6030, 7020, 7520. (Item #: 170285, Ref: R47067) $102.00

Center Link Body - For John Deere tractor models 4555, 4560, 4630 (s/n 030391-later), 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T, 8430 (s/n 004504-later, Model year 1974-1981), 8440, 8450, 8560, 8570, 8630 (s/n 006170-later), 8640, 8650, 8760, 8770, 8850, 8960, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, Replaces John Deere OEM number RE50533, R107281, R64083, R70589, (Item #: 170010) $82.00

Center Link End - For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number RE44561, AR76114, AR87888, Thread: Left Hand, Pin Hole : 1.264", (Item #: 170302) $143.00

Center Link Handle - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number R42495, R27007, (Item #: 164548) $5.98

No
Picture
Center Link Handle, Used - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number R42495, R27007, For a new version of this item use Item #: 164548, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436410) $6.01

No
Picture
Draft Link, LH, Used - For John Deere tractor models 700, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM nos AR55151, AR35803, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431074) $338.01

No
Picture
Draft Link, RH, Used - For John Deere tractor models 700, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM nos AR55150, AR35802, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431073) $338.01

No
Picture
Drawbar - For John Deere tractor models 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R36608, Length: 63.250", Width: 3", Height: 1-1/2", Offset: 2.25", Hole Spacing: (2) 1.312" diameter holes @ 2.130" and 5.380" from front, (Item #: 110313) $372.00

No
Picture
Drawbar - For John Deere tractor models 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630, Replaces John Deere OEM number R50984, Length: 63.250", Width: 3", Height: 1.750", Offset: 1.87", Hole Spacing: 1.312" diameter holes @ 2.730" and 4.540" from front, (Item #: 110327) $304.00

Drawbar Hammerstrap - For John Deere tractor models 4050 (Hi Crop), 4250 (Hi Crop), 4450, 4455, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (From S/N 25000), 6030, 7020, 7520, 8430, 8630, Replaces John Deere OEM number R80447, AR53877, RE19377, 2" Drawbar opening, For 1-3/8" Drawbar Pin, Used with R50984 or R62081 Drawbars, (Item #: 109693) $111.00

Drawbar Support, Front, Used - For John Deere tractor models 4630, 4640, 4840, Replaces John Deere OEM nos AR70263, RE21313, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436706) $256.01

Front Drawbar Support, Used - For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM nos RE21320, RE12565, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496867) $445.01

Front Pull Arm Washer - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, (Item #: 121442) $14.30

No
Picture
Front Pull Arm Washer, Used - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, For a new version of this item use Item #: 121442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435774) $8.26

Hammerstrap Pin Retainer - For tractor models 4520, 4555, 4560, 4620, 4630, 4650, 4755, 4760, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8630. (Item #: 128176, Ref: R54064) $31.00

Handle - For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Replaces John Deere OEM number R64084, (Item #: 170291) $15.50

Link Bracket, Used - For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos AR80154, Replaces John Deere Casting nos R57281, R64389, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431671) $105.01

Load Control Bushing - For John Deere tractor models 4520, 4620, 4630, 7020, 7520, Replaces John Deere OEM number R43316, 1.332" I.D., 1.736" O.D., (Item #: 151993) $26.40

Load Control Shaft - For John Deere tractor models 4630, 7020 (s/n 2700 - later), 7520 (s/n 1572 - later), Replaces John Deere OEM number R52185, 20" Long, 1.3" Diameter, (Item #: 117940) $107.00

Load Control Shaft Bushing - For John Deere tractor models 4620, 4630, 7020 (s/n 2670 - later), 7520 (s/n 1572 - later), Replaces John Deere OEM number AR56769, AR85460, With O-Ring, (Item #: 117935) $80.00

Load Control Shaft Washer - For John Deere tractor models 4630, 7020 (s/n 2700 - later), 7520 (s/n 1572 - later), Replaces John Deere OEM number R52184, (Item #: 117937) $6.40

O-Ring, Load Control Shaft - For John Deere tractor models 4620, 4630, 7020, 7520, Replaces John Deere OEM number R53198, (Item #: 117936) $2.40

No
Picture
Sway Block - Left Hand For 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520 (Item #: 110476, Ref: R3141) $107.10

No
Picture
Sway Block - Right Hand For 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520 (Item #: 110475, Ref: R3142) $106.00

Sway Block - Left Hand, Used - For John Deere tractor models 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 700, Replaces John Deere OEM number R48816, Left Hand, For a new version of this item use Item #: 110476, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410476) $64.01

Top Link - Top Link, Category III. For tractor models 4630, 4640, 4650, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650. For 1530, 2020, 2030, 2240, 2440, 2630, 2640 (Item #: 102074, Ref: TP-AT34208TL3) $235.00

Top Link Assembly, Used - For John Deere tractor models 4555, 4560, 4630 (s/n 030391-later), 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T, 8430 (s/n 004504-later), 8440, 8450, 8560, 8570, 8630 (s/n 006170-later), 8640, 8650, 8760, 8770, 8850, 8870, 8960, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9360R (s/n 000101-014999), 9370R (s/n 015000-later), 9400, 9400T, 9410R (s/n 000101-014999), 9420, 9420R (s/n 015000-later), 9420T, 9430, 9430T, 9460R (s/n 000101-014999), 9460RT (s/n 900101-905999), 9470R (X), 9470R (s/n 015000-later), 9470R (T s/n 906000-later), 9510R (s/n 000101-014999), 9510RT (s/n 900101-905999), 9520, 9520R (X), 9520R (s/n 015000-later), 9520R (T s/n 906000-later), 9520T, 9530, 9530T, 9560R (s/n 000101-014999), 9560RT (s/n 900101-905999), 9570R (X), 9570R (s/n 015000-later), 9570R (T s/n 906000-later), 9620, 9620R (X), 9620R (s/n 015000-later), 9620T, 9630, 9630T, Replaces John Deere OEM number RE50533, R70589, R10615, R106916, R107281, R122360, R127582, R204255, RE44549, RE63412, Replaces John Deere Casting nos R64083, R107281, Drag Link Assembly, For a new version of this item use Item #: 102074, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402074) $141.01

Top Link End - For John Deere tractor models 4455, 4560, 4630 (after SN 030391), 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8200, 8300, 8400, 8430 (after SN 004504), 8440, 8450, 8630 (after SN 006170), 8640, 8650, Replaces John Deere OEM number RE44559, Tractor End, Catagory III, RH Thread, 1.264" Pin hole, (Item #: 110323) $124.00

Universal Parts and Accessories
Category: Hitch / Drawbar

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $8.90

$John Deere 4630 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $60.00

$John Deere 4630 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $40.40

$John Deere 4630 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$John Deere 4630 Drawbar, Universal Cat I, 30-1\8 Inch$
Drawbar, Universal Cat I, 30-1/8 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $44.30

$John Deere 4630 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $58.00

$John Deere 4630 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $58.00

$John Deere 4630 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $138.00

$John Deere 4630 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $99.00

$John Deere 4630 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $71.00

$John Deere 4630 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $104.00

$John Deere 4630 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $298.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $47.71

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.20

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.10

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $43.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $39.30

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $58.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $60.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $63.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $64.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $38.10

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $335.41

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $328.58

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $21.50

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $28.00

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $97.32

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.50

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $26.10

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All 4630 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy