FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 1840 Parts

Category: Hydraulic System

[Categories] [All 1840 Parts] [All John Deere Models]

Hydraulic Lift Shaft - For tractor models (1020 up to SN# 117499), 1120, 1030, 1130, 1630, 1520, 1530, 1640, 1840, 2040, 1830, 2030, 2130, 2020, 2120, 2030, (2040 SN# 350000 and up), 2150, 2255, 2155, 2355N, 2240, 2440, 2630, 2640, 2755, 2855N, 300B, 820, 920, 830, 930. (Item #: 125402, Ref: T29931) $153.00

Hydraulic Pump - New pump has 8 pistons, keyed shaft with needle bearing 23cm, 13.5 G.P.M, 2750 P.S.I - no flow, 2000 P.S.I - max flow. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2755, 2840, 2850, 2855, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650. (Item #: 109916, Ref: AR103033) $500.00

Hydraulic Pump - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Item #: 165242, Ref: AR94660) $1199.01

Hydraulic Pump - Hydraulic Pump has 1 1/16 inch Left inlet, 7/8 inch Top Inlet, 1 5/8 Right Inlet, 1 1/16 inch Discharge. Verify measuerments before ordering. It is used on 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 300 Indust/Const, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 500 Indust/Const, 5010, 600 Indust/Const, 9950 Cotton Picker, 9960 Cotton Picker, 9965 Cotton Picker, 9970 Cotton Picker. It replaces AR39168, AR90459, AR97872, R39695 (Item #: 114592, Ref: AR97872) $930.00

No
Picture
Hydraulic Pump - For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 5010, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970 (Power Shift), Compatible with John Deere Construction and industrial models 300, 500, 600, Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", Right Inlet: 1-5/8", Left Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200410, (Item #: 121710) $1000.00

Hydraulic Pump Drive Coupler, Front, Used - For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1840, 1850, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450, 8560, Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 210, 300, 310, 315, 415, 515, Replaces John Deere OEM number L34569, For a new version of this item use Item #: 154894, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499212) $5.01

Hydraulic Pump Drive Coupler, Rear, Used - For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1840, 1850, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, Compatible with John Deere Construction and industrial models 210, 300, 310, 315, 415, Replaces John Deere OEM number L34432, For a new version of this item use Item #: 154893, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499211) $5.01

Hydraulic Pump Drive Cushion, Used - For John Deere tractor models 1040, 1640, 1840, 2040, 2040S, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 3640, 4040 (European), 4050, 4055, 4240 (European), 4250, 4255, 4350, 4440 (European), 4450, 4455, 4555, 4560, 4640 (Power Front Wheel Drive), 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8400, 8450, 8650, 8850, 9400, Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 210C, 300B, 300D, 301A, 302A, 310A, 310C, 310D, 315C, 315D, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 444C, 444CH, 482C, 500C, 510, 510B, 510C, 510D, 515B, 570B, 610B, 610C, 644C, 710B, 710C, 710D, 762A, 762B, Replaces John Deere OEM number R78202, T58196, For a new version of this item use Item #: 114011, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414011) $4.71

Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is 7.785 inches long with a 0.877 inch diameter, keyed hole. It is used with coupling parts R78202, L34432 and L34569. It replaces original part number L34572 (Item #: 160350, Ref: L34572) $66.00

Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is 7.370 inches long and has 14 splines. It replaces original part number L34573 (Item #: 112005, Ref: L34573) $91.00

Hydraulic Pump Inlet Valve - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 4240, 4250, 4255, 4320, 4430, 4450, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number AR53301, 2.4 cu. in. Serialized and Non-Serialized, 3 cu. in. Serialized and Non-Serialized, 4 cu. in. Serialized and Non-Serialized, (Item #: 113886) $27.20

Hydraulic Pump Packing - For John Deere tractor models 301, 500, 600, 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2951, 2955 (s/n 767516-earlier), 3010 (s/n 049999-earlier), 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8100, 8200, 8300, 8400, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 7445 (s/n 275483, 4.219 engine), Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 310, 310A, 310B, 350, 350B, 350C, 350D, 380, 401B, 410, 410C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 444D, 444E, 450 (with 3320 or 3325 winch), 450B, 450C, 480, 480A, 480B, 480C, 500A (s/n 123113-earlier), 500A (s/n 123114-152141), 500B, 500C, 510, 540, 540A, 540B, 540E, 544, 544A, 544B, 544D, 544E, 548E, 570, 570A, 624E, 640, 640E, 644A, 644B, 644C, 644D, 646, 646B, 646C, 648E, 690, 690A, 710B, 710C, 740, 740A, 740E, 748E, 760 (s/n 123113-earlier), 844, 860, 860A, 862, Compatible with John Deere Engine (s) 6359T, 6466D, 6466T, Compatible with John Deere Hay Cutting (s) 2270 (s/n 275483, 4.219 engine), Replaces John Deere OEM number R26149, (Item #: 113996) $1.90

Hydraulic Pump Repair Kit - For John Deere tractor models 930, 940, 1020, 1030, 1040, 1140, 1350, 1520, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2250, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, Compatible with John Deere Construction and industrial models 300, 301, 301A, 302, 400, 401, 401B, 401D, 840, Replaces John Deere OEM number AL35755, (Item #: 113896) $149.00

Hydraulic Pump Seal Kit - Repairs AR103033 (23CMS) and AR103035 (11.3 CMS) Hydraulic Pumps. For JD 300, 301, 400, 401, 1020, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2135, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2941, 2951, 301A, 302, 3030, 3040, 3050, 3120, 3130, 3135, 3140, 3141, 3150, 3340, 3350, 3351, 3640, 3641, 3650, 3651, 4010, 7440, 7445, 830, 840, 930, 940, 1040. Industrials: 301, 400, 401. (Item #: 113893, Ref: S-AR98993) $24.60

Hydraulic Pump Seal and O-Ring Kit - 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Item #: 114400, Ref: RE29107) $99.33

Hydraulic Pump Seal and O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Item #: 113864, Ref: RE29103) $56.00

No
Picture
Hydraulic Pump, Remanufactured, AR94660 - For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 5010, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300, 500, 600, Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", RH Inlet: 1-5/8", LH Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 121710, (Item #: 200410) $1223.01

Hydraulic Pump, Used - For John Deere tractor models 500, 600, 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 5010, Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970, Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", RH Inlet: 1-5/8", LH Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a new version of this item use Item #: 200410, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400410) $660.01

Hydraulic Pump, Used - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2130, 2140, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040, 3130, 3140, 4010, 4030, 5010, Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300, 440, 440A, 500, 600, Replaces John Deere OEM number AR90459, AR97872, Replaces Casting nos R45228, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 7/8", Left Inlet: 1-1/16", 40cm, 2.4ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a new version of this item use Item #: 114592, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414592) $600.01

Hydraulic Selector Control Valve Pinion - Used in both single and double lever hydraulic selector control valves on John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2250, 2350, 2355, 2450, 2550, 2650, 2750, 2755, 2850, 2855N, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3155, 3255, 3350, 3640, 3650, 840, 940. The rack for this pinion is available separately as part number T32132 (Item #: 179677, Ref: T32547) $55.12

Hydraulic Selector Control Valve Rack - Used in conjunction with T32547, this rack is used in both single and double lever hydraulic selector control valves. (Item #: 179400, Ref: T32132) $95.94

Needle Bearing Race - For John Deere tractor models 1640 (s/n 430000-later), 1830, 1840, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 767516-earlier), 3010 (s/n 049999-earlier), 3020, 3030, 3040 (s/n 430000-later), 3050, 3055, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 3350, 3640, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300, 300A, 300B, 300D, 300GLC, 300-2, 302A, 310, 310A, 310B, 340D, 400, 400-3, 400D, 400G, 401, 401C, 401D, 410, 410B, 410C, 410D, 415B, 500, 500A (s/n 152141-earlier), 500B, 510, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540D, 544, 544A, 544B, 544C, 548D, 570, 570A, 570B, 600, 610B, 610C, 640, 640D, 644A, 644B, 644C, 646, 646B, 646C, 648D, 670, 670A, 670B, 672A, 672B, 700A, 710B, 710C, 710D, 740, 740A, 743, 743A, 760A, 762, 762A, 762B, 770, 770A, 770AH, 770B, 772A, 772AH, 772B, 862, 862B, Replaces John Deere OEM number R80558, R72509, R72506, (Item #: 113863) $39.98

Remote Break-Away Coupler, RH, Used - For John Deere tractor models 940, 1020, 1040, 1140, 1520, 1530, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2240, 2440, 2630, 2640, 2840, 2940, 3030, 3130, Replaces John Deere Casting number R39109, Replaces John Deere OEM nos AR39036, Right Hand Side, For a Remanufactured version of this part use Item #: 207101, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499381) $321.01

Rockshaft Cover Gasket - This Rockshaft Cover Gasket (Lift Cover Gasket) Fits John Deere Tractor (s) 820 (3 Cyl.), 830 (3 Cyl.), 920, 930, 1020, 1030, 1040, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040 (s/n 349999-earlier), 2040S, 2120, 2130, 2140, 2240 (s/n 349999-earlier), 2440, 2630, 2640. Construction and Industrial: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C. Replaces L41551, L34401, T21641 (Item #: 161832, Ref: T21641) $13.90

Rockshaft Cover Gasket Kit - Rockshaft Cover Gasket Kit (Lift Cover) includes a metal gasket. John Deere TRACTOR: 1040, 1140, 1350, 1640 (serial number 430, 000 and up), 1641, 1641F, 1750, 1840, 1850, 1950, 2040 (serial number 430, 000 and up), 2040S (serial number 430, 000 and up), 2140 (serial number 430, 000 and up), 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (before serial number 767517), 3040 (serial number 430, 000 and up), 3050, 3055, 3140 (serial number 430, 000 and up), 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, 840, 940. Replaces AL57974 (Item #: 164140, Ref: AL57974) $59.00

No
Picture
Selective Control Valve Kit - For John Deere tractor models 1020, 1040, 1140, 1520, 1530, 1640, 1840, 2020, 2030, 2040, 2040S, 2140, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3020, 3040, 3140, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640, Replaces John Deere OEM number AR45647, AR52629, AR78396, AR86535, RE10924, Includes: Selective Control Valves with Teflon Seat, SCV Overhaul Kit and Breakaway Coupler Overhaul Kit, (Item #: 177053) $361.00

No
Picture
Selective Control Valve Kit - For John Deere tractor models 1020, 1040, 1140, 1520, 1530, 1640, 1840, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3020 (s/n 123000-later), 3040, 3140, 3150, 3155, 3255, 4000, 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number AR45647, AR52629, AR78396, AR86535, RE10924, Includes; Selective Control Valves with Teflon Seat and SCV Overhaul Kit, (Item #: 177055) $305.00

Valve Kit, Hydraulic Pump - For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650. Replaces R48738, R83508, R48738, R49297 (Item #: 113883, Ref: S-RE23382) $6.80

Valve, Hydraulic Pump - For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650. (Item #: 180714, Ref: AL71019) $34.40

Universal Parts and Accessories
Category: Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.90

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $378.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $696.00

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $20.98

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1307.44

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.80

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $12.30

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.50

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $14.90

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $8.98

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.50

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All 1840 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy