Lower Lift Link Yoke, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, Compatible with John Deere Combine(s) 2240, Replaces John Deere OEM number R48595, For a new version of this item use Item #: 111346, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411346)$23.76
No Picture
Needle Bearing - For John Deere tractor models 1020, 1520, 2020, 2030, 2440 (s/n: 340999-earlier), 2510, 2520, 2630, 2640 (s/n: 340999-earlier), 3020, 4000, 4020, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 440, 440A, 440B, 500, 500A, 500B, 510, 540, 540A, 600, 644B, 644C, 646C, 760A, Compatible with John Deere Lawn and Garden (s) 110 (s/n: 3571-earlier), 110 (H, s/n: 3571-earlier), Replaces John Deere OEM number 368372R91, A57046, G13604, 18-693, 142090, 18-1643, (Item #: 176563)$3.24
PTO Bearing Housing / Quill - This is the Bearing Housing / Quill, Rear PTO Shaft used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400. Replaces T22237, R47514 (Item #: 172961, Ref: R47514)$231.00
PTO Brake Band - This PRO Brake Band is used on John Deere 1020, 1520, 2020, 830, 930, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 301A, 401B, 401D. Replaces AR58605 and RE44253 (Item #: 163796, Ref: RE44253)$80.00
PTO Clutch Disc - 45 internal splines, 5.250" O.D.. For tractor models (1020, 1520, 2020, 2640 with hi-lo shift), (1530 SN# xxxxxx and up), (2030, 2630 with hi-lo shift and SN# xxxxxx and up), 2240, (2440, 2640 with ind. 540-1000 PTO and hi-lo trans.), 2940, 2955. Replaces AR78361. (Item #: 127048, Ref: AR108105)$12.00
PTO Clutch Drum, Used - For John Deere tractor models 1830, 2030, 2135, 2440 (s/n 305273-later), 2630, 2640 (s/n 305273-later), Replaces John Deere OEM nos AL23188, AL29817, Depth Inside of Hub: 3", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497219)$670.01
PTO Clutch Plate - 5.20" O.D., 3.903" I.D., .179" thick. For tractor models (1020 with independent 540 PTO), (1520 with indp PTO SN# xxxxxx and up), (1530 with indp 540 PTO used with AL29818 frum), (2020 with indp PTO used with AL29181 drum), (2030 with indp 540-1000 PTO SN# 187301 and up used with AL29820 drum), (2040 with 540 PTO SN# 350000 and up), 2155, 2240, 2355, 2355N, 2440, 2630 with indp 540-1000 PTO), 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. AL23113, AT32058. (Item #: 127061, Ref: L33563)$21.50
PTO Countershaft, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R33852, 540-1000 RPM Independent PTO, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497636)$25.01
No Picture
PTO Friction Disc - PTO FRICTION DISC For 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2440 LESS HI-LO, 2630, 2640, 2640 LESS HI-LO, 2840 (Item #: 127057, Ref: TP-RE37011)$8.90
PTO Guide, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1640, 1830, 2020, 2030, 2040, 2040S, 2130, 2140 (s/n 430000-later), 2155, 2350, 2355, 2355N, 2400, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3020, 3030, 3040, 3055, 3120, 3140 (s/n 430000-later), 3150, 3155, 3255, 4000, 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R45126, R38220, 16 Drive Splines, For a new version of this item use Item #: 121740, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421740)$40.01
PTO Plate, Remanufactured, AT21675 - For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2440, 2450, 2550, 2630, 2640, Replaces John Deere OEM number AT21675, AL19092, Clutch Size: 9", Clutch Hub: 1-1/2", Clutch Spline: 23, Clutch Center: Spring, For a New version of this sku use Item #: 150755, (Item #: 205870)$109.01
PTO Shaft, Used - For John Deere tractor models 301, 820, 830, 1020, 1030, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2040 (s/n 430000-later), 2140 (s/n 430000-later), 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 401B (s/n 339687-later), 401C, 401D, Replaces John Deere OEM number R69509, Splines: 6 and 21, Length: 31 1/4", Raised section on shaft for bearing guides., With snap rings use Item #: 498486, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429331)$390.01
PTO Shift Collar, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2755, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM nos T26337, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437950)$60.01
Universal Parts and Accessories Category: PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124837, Ref: AB4111WY138)$122.00
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$176.91
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
Overrun Coupler with Quick Release - This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. Rated up to 70 horsepower. (Item #: 182532, Ref: S.23639)$56.00
PTO Adapter - I.D. 1.125 inch 6 spline Female to O.D. 1.375 inch 6 spline Male, ExtendsL 1.125 inches, Length: 3 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103190, Ref: PA01)$11.60
PTO Adapter - Inside diameter 1.375 inch 21 spline female to outside diameter 1.375 inch 6 spline male. Extends: 4.125 inch, length: 6.375 inch. Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103188, Ref: PA08)$31.00
PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inches, Length: 6.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103187, Ref: PA09)$70.00
PTO Adapter - Extends and increases: 1 1/8" female 6 spline to 1 3/8" male 6 spline. 4-5/8" length. Extends PTO 2-3/4" . Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". Also Replaces T353F. (Item #: 103191, Ref: PA04)$21.00
PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.125 inch 6 spline male, Extends: 2.750 inches, Length: 5.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103192, Ref: PA05)$19.80
PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends PTO Shaft 4.00 inches, Length: 5.75 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 121311, Ref: PA06)$24.00
PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.125 inches, Length: 5.875 inches, Max HP: 70 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 152729, Ref: PA11)$37.00
PTO Adapter - I.D. 1.750" 20 spline female to O.D. 1.375" 6 spline inch male, Extends: 4.625", Length: 7.50", Max HP: 100. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: PA12)$64.58
PTO Adapter - I.D. 1.750 inch 20 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.625 inches, Length: 7.00 inches, Max HP: 100 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103195, Ref: PA14)$50.00
PTO Driveline - Weasler Driveline 14006127ST is designed for fertilizer spreader and general applications., Designed for fertilizer spreader general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 1, Compressed (Closed) Length: 27", Extended Length: 30", Compressed Overall Length: 34.08", Extended Overall Length: 37.08", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 15 HP at 540 RPMS and 23 HP at 1000 RPMS, (Item #: 131232)$124.00
PTO Driveline - Weasler Driveline 14006340ST is designed for fertilizer spreader and general applications., Designed for finishing mower general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 3, Compressed (Closed) Length: 31.89", Compressed Overall Length: 39.93", Extended Length: 48.94", Extended Overall Length: 56.98", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 29 HP at 540 RPMS and 44 HP at 1000 RPMS, (Item #: 131234)$159.00
PTO Driveline - Weasler Driveline 14006430ST is designed for for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 4, Compressed (Closed) Length: 22.05", Compressed Overall Length: 30.00", Extended Length: 30.28", Extended Overall Length: 40.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, Rated for 36 HP at 540 RPMS and 56 HP at 1000 RPMS, (Item #: 131238)$169.98
PTO Driveline - Weasler Driveline 14006432ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 24.02", Compressed Overall Length: 31.97", Extended Length: 35.55", Extended Overall Length: 43.50", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131239)$162.00
PTO Driveline - Weasler Driveline 14006437ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 37.00", Compressed Overall Length: 46.39", Extended Length: 43.67", Extended Overall Length: 53.06", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131241)$170.00
PTO Driveline - Weasler Driveline 14006442ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 33.86", Compressed Overall Length: 41.81", Extended Length: 53.88", Extended Overall Length: 63.27", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round�, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131242)$179.00
PTO Driveline - Weasler Driveline 14006448ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 39.76", Compressed Overall Length: 48.18", Extended Length: 61.81", Extended Overall Length: 70.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131243)$169.00
PTO Driveline - Weasler Driveline 14006542ST is designed designed for rotary cutter general applications, Designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 33.86", Compressed Overall Length: 42.44", Extended Length: 51.26", Extended Overall Length: 59.84", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131246)$210.00
PTO Driveline - Weasler Driveline 14006546ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 37.80", Compressed Overall Length: 46.70", Extended Length: 57.83", Extended Overall Length: 63.73", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131248)$226.00
PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103167, Ref: C690F)$76.00
PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 191020, Ref: C680F)$73.00
PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 3/8 inch male, 6-Spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103168, Ref: C660F)$64.00
PTO Overide Clutch - Override coupler for converting 1 1/8 inch female to 1 3/8 inch male, (has 1 1/8 inch female at one end and 1 3/8 inch male at the other end) 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103169, Ref: C670F)$51.00
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$258.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 5/8 inch round bore with keyway. (Item #: 183772, Ref: B6691)$57.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 3/4 inch round bore with 1/4 inch keyway. (Item #: 183766, Ref: B2711)$63.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183768, Ref: B2712)$51.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 1 inch round bore with keyway. (Item #: 183770, Ref: B2713)$50.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 3/4 inch round bore with keyway. (Item #: 183763, Ref: B2902)$53.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183764, Ref: B2903)$48.00
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
