FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 1750 Parts

Category: Steering

[Categories] [All 1750 Parts] [All John Deere Models]

Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124660, Ref: L35603) $382.00

Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124661, Ref: L35604) $230.00

Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref: AL33349) $240.62

Axle Shaft and Yoke, MFWD - Used on ZF APL1351 Mechanical Four Wheel Drive front end, this shaft is 9.39 inches long with 21 teeth. Replaces OEM numbers 3216599R91, 81927571, AL32883, ZP1927571. John Deere models 940, 1040, 1140, 1550, 1750, 1850, 2040, 2040S, 2140, 2150, 2240 (Item #: 115716, Ref: AL32883) $111.98

Axle Shaft with Yoke - Used on ZF APL351 Mechanical Four Wheel Drive front ends, this shaft and yoke is 35.50 inches from center of the u-joint to the end. It has 21 teeth. This part replaces OEM numbers ZP1927573, 3230278R1, AL32884. John Deere 940, 1040, 1140, 1550, 1750, 1840, 1850, 2040, 2040, 2040S, 2140, 2150, 2240 (Item #: 160162, Ref: AL32884) $338.00

Ball Joint - Length is 9.25 in, diameter is 0.781". For tractor models 1020, 1030, 1120, 1140, 1530, 1550, 1630, 1641, 1641F, 1750, 1850, 1850N, 2020, 2120, 2150, 2155 (with SWEPT BACK AXLE), 2255, 2355N (with SWEPT BACK AXLE), 920, 940, 1040. (Item #: 102245, Ref: AL39019) $37.20

Ball Joint - Length is 5.00", female end diameter is 1.125" I.D.. Fits 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1641F, 1750, 1950N, 2020, 2120, 2150, 2155 (with SWEPT BACK AXLE), 2250, 2251N, 2255, 2350, 2355, 2355N (with SWEPT BACK AXLE), 2450, 2550, 2555, 2755, 2855 (with SWEPT BACK AXLE), 820, 830, 840, 920, 930. Replaces: DE16303, 14M3290, AL39020, AL68629, AT27130 (Item #: 102248, Ref: AL39020) $29.00

Ball Joint, 11 Notch - A= 12.250", B= .781". For tractor models 1120, 1350, 1950N, 2150, 2255, 820, 830, 840, 920, 930, (1750, 2155, 2355N, 2855N, 1040 all with swept back axle), 1030. (Item #: 102249, Ref: AL39022) $29.40

Ball Joint, 13 Notch - Measure 14.509 inches from center of ball joint to the end of the shaft. The shaft is 0.781 inches in diameter. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1850, 1950, 2020, 2120, 2150, (2155 with straight axle), 2250, 2350, 2355, 2550, 2555, 2755. Replaces John Deere part numbers AL178098, AL39024 (Item #: 102246, Ref: AL39024) $26.40

Bellcrank - This bellcrank is used on models 1040, 1140, 1350, 1550, 1750, 1850, 1950, 1950N, 2155, 840, 940, 2150. (Item #: 104919, Ref: AL55148) $190.00

Bellcrank - For 1140, 1350, 1550, 1750, 1850, 1850N, 2155, 2255, 830, 840, 930. Bellcrank. (Item #: 104918, Ref: AL55150) $199.00

Center Steering Arm Pin Bushing - Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Item #: 179918, Ref: JD10137) $28.67

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $42.10

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $42.10

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

Drag Link Assembly - For 1040, 1140, 1350, 1550, 1750, 1850, 840, 940. Complete Drag Link Assembly. (Item #: 104800, Ref: AL39036) $166.00

Drag Link Assembly - For 1140, 1350, 1550, 1750, 1850, 840, 940. Drag Link Assembly, 35.75" long, 1.1" wide. (Item #: 104800, Ref: AL39036) $166.00

Drang Link Shaft Cover Gasket - For John Deere tractor models 830 (3 Cyl.), 840, 930, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1750, 1830, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2355N, 3030, 3130, Replaces John Deere OEM number L62423, L35654, T21527, (Item #: 161827) $3.20

E1NN1N050AA - Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. Used on ZF Mechanical Four Wheel Drive axles. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Item #: 156198, Ref: E1NN1N050AA) $6.70

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Item #: 111973, Ref: T21669) $12.00

Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Item #: 113981, Ref: T23170) $9.20

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855, 2855N (Item #: 124593, Ref: L60747) $13.30

Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following John Deere models: 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2855N (Item #: 124592, Ref: L60748) $15.20

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $64.00

Hub, Front Wheel, 6 Bolt - 6 Bolt Hub uses p/n WBKJD3 wheel bearing kit and p/n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755 (Mid-Hi axle), 820, 830, 840. (Item #: 102233, Ref: R47076) $62.00

Orbital Steering Unit Seal Kit - Used on Danfoss Orbital Steering units on John Deere models: 1640, 2040, 2140, 3040, 3140, 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050, 3350, 3650. This Kit replaces John Deere part number AL112819 (Item #: 165413, Ref: 1810503M92) $29.80

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 2040, 2040S, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855N (Item #: 124690, Ref: L53819) $2.40

Planetary Carrier Housing - Used on ZF APL-325 Axles. Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Item #: 127236, Ref: VPR6067) $1199.01

Planetary Gear - Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Item #: 124631, Ref: VPJ7852) $108.00

Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Item #: 164180, Ref: L40010) $279.00

Planetary Ring Gear - For Mechanical Four Wheel Drive, this planetary ring gear has 114 spines and an outside diameter of 8.16 inches. This part replaces OEM numbers 81452C1, 83927789, L40043 (Item #: 124630, Ref: L40043) $386.00

Roller Bearing with Cup MFWD - Used on ZF APL315, APL325, and APL330 Mechanical Four Wheel Drive Axles, the pivot bearing replaces OEM part numbers 1342525C2, 1342525C1, 81416C1, 81417C1, 83958377, AL63617, ZP0750117306, LM72848 and LM72810. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 1950, 2040, 2250, 2450, 2650 (Item #: 124691, Ref: AL63617) $45.90

No
Picture
Spider U-Joint Assembly - For John Deere tractor models 1550 (s/n 750789-later), 1550 (s/n 720000-750788), 1640 (s/n 038265-048738), 1750 (s/n 720000-750788), 1850 (s/n 720000-later), 1850N, 1950 (s/n 720000-later), 1950N, 2040 (s/n 038265-048738, 450000-later), 2040S (s/n 038265-048738, 450000-later), 2250, 2350 (s/n 038265-048738), 2355, 2450, 2550 (s/n 038265-048738), 2555, 2650, 2650N, 2755, 2850, Replaces John Deere OEM number AL64255, AL65195, AL64126, AL71316, (Item #: 176288) $88.00

$John Deere 1750 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For John Deere tractor models 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2140, 2250 (with 44.5mm king pin), 2350, 2355, 2450, 2550, 2555, 2650, 2755 (Hi-Version), 2850, Replaces John Deere OEM number AL28222, Dimension A: 14.875", Dimension B: 1.500", Dimension C: 1.795", Dimension D: 1.312", Left or Right Side, (Item #: 102217) $156.00

No
Picture
Spindle - Right Hand/Left Hand, Used - For John Deere tractor models 940, 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2120, 2155 (hi-straight axle), 2355, Replaces John Deere OEM number AR58607, T29214, R47078, For a new version of this item use Item #: 102219, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453579) $40.20

Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Item #: 113923, Ref: T21539) $11.60

Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2282T (Item #: 115287, Ref: M2282T) $4.70

$John Deere 1750 Spindle LH\RH$
Spindle LH/RH - Measures A = 11.875", B = 1.375", C = 1.375", D =.842" REPLACES OEM numbers : AR49589, AT23636. Fits:1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2040, 2120, 2150, 2155 (mid-hi axle), 2250 (swept back), 2350 (low profile), 2355 (mid-hi axle), 2450, 2550, 2555 (mid-hi axle), 2755 (mid-hi axle), 820, 830, 840, 920, 930, 940, 1035. Wheel Bearing kit available separately as p/n WBKJD3. (Item #: 102216, Ref: AR58606) $148.00

$John Deere 1750 Spindle LH\RH with fender mtg brkt.$
Spindle LH/RH with fender mtg brkt. - Measures A = 15.312", B = 1.375", C = 1.375", D =.842". Fits 1020, 1030, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2120, 2155 (hi-straight axle, 2355N, 940, 1040. Wheel Bearing kit available separately p/n WBKJD2 or WBKJD3 Depending on application. Verify OEM of individual parts needed your your application. (Item #: 102219, Ref: AR58607) $130.00

Spindle Thrust Bearing - This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Item #: 104207, Ref: JD8407) $10.30

Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2283T (Item #: 115286, Ref: M2283T) $2.62

Steering Arm - For John Deere tractor models 940, 1020, 1120, 1130, 1140, 1520, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2120, 2150, 2155, 2250, 2440, 2630, 2640, Replaces John Deere OEM number L25879, (Item #: 104933) $95.00

Steering Arm - Left Hand - For John Deere tractor models 840, 940, 1020 (All w/ Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w/ Straight Fron Axle), 1530 (All w/ Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w/ Straight Fron Axle), 2030 (All w/ Straight Fron Axle), 2120, 2150, 2155 (All w/ Straight Fron Axle), 2240 (All w/ Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w/ Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w/ Straight Fron Axle), 2630 (All w/ Straight Fron Axle), 2640 (All w/ Straight Fron Axle), 2755 (All Middle Version w/ Straight Fron Axle), Compatible with John Deere Construction and industrial models 301, 401, Replaces John Deere OEM number T21619, Fits Left Hand Side, For Right Hand Side use Item #: 104957, (Item #: 104956) $153.00

Steering Arm - Right Hand - For John Deere tractor models 840, 940, 1020 (All w/ Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w/ Straight Fron Axle), 1530 (All w/ Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w/ Straight Fron Axle), 2030 (All w/ Straight Fron Axle), 2120, 2150, 2155 (All w/ Straight Fron Axle), 2240 (All w/ Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w/ Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w/ Straight Fron Axle), 2630 (All w/ Straight Fron Axle), 2640 (All w/ Straight Fron Axle), 2755 (All Middle Version w/ Straight Fron Axle), Compatible with John Deere Construction and industrial models 301, 401, Replaces John Deere OEM number T21618, Fits Right Hand Side, For Left Hand Side use Item #: 104956, (Item #: 104957) $84.98

Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Item #: 115654, Ref: T23118) $9.90

Steering Arm, Used - For John Deere tractor models 940, 1020, 1120, 1130, 1140, 1520, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2120, 2150, 2155, 2250, 2440, 2630, 2640, Replaces John Deere OEM number L25879, Front Axle, Heavy Duty, For a new version of this item use Item #: 104933, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404933) $52.01

Steering Arm, Used - For John Deere tractor models 940, 1020, 1120, 1130, 1140, 1520, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2120, 2150, 2155, 2250, 2440, 2630, 2640, Replaces John Deere OEM number L25880, Front Axle, Heavy Duty, For a new version of this item use Item #: 104934, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404934) $50.01

Steering Motor - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2755, 2850, 3050, 3350, Replaces John Deere OEM number AL41631, (Item #: 164464) $414.00

Steering Shaft Arm - 4 teeth, .641" hole dia. For tractor models (1020, 1520, 1530, 2020 manual or power steering), (1030, 1120, 1130, 1630, 2120 european manual or power steering), (1040, 1140 european 2WD with clutch housing #AL33368), (1350, 1550, 1750, 1850 european with collar shift trans), (2030 power steering). (Item #: 163451, Ref: T28272) $265.00

No
Picture
Steering Valve Assembly - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, AL31515, AL70699, AT23175, RE10800, Only for use with closed center hydraulic system, Tall Housing - 15-1/2", Comes primered (color may vary). Prior to painting check fitment, For a Remanufactured version of this sku use Item #: 205195, (Item #: 109847) $750.00

Steering Valve Assembly, Remanufactured, AL31515 - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31515, AL31262, AL70699, AT23175, RE10800, Marked L34450, R58041, R77312, R77314, T25295, For a New version of this sku use Item #: 109847, (Item #: 205195) $660.01

Steering Valve Assembly, Used - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, RE10800, AL31515, AL70699, AT23175, For a new version of this item use Item #: 205195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409847) $530.01

No
Picture
Steering Wheel, Used - For John Deere tractor models 940, 1030, 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1850, 2040, 2040S, 2130, 2140, 2650, 2750, 2840, 2850, 2940, 2950, 3030, 3040, 3130, 3140, Replaces John Deere OEM number AL28458, L28988, 17-1/2" diameter, 7/8", 36 splined hub, 3 covered spokes, For a new version of this item use Item #: 101449, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435285) $26.01

Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $70.00

Tie Rod - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110L, 6120L, 6200, 6200L, 6210L, 6300, 6300L, 6310L, 6310S, 6400, 6400L, 6410L, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, Replaces John Deere OEM number AL37204, Length: 18.750", Width: 1.250", (Item #: 160188) $36.98

Tie Rod Assembly - For 1020, 1030, 1040, 1120, 1130, 1630, 2020, 2120, 840, 940, (1140, 1350, 1550, 1750, 1850, 1950, 2250 all with Straight Front Axle), 1640 with Low Clearance Axle. Complete Tie Rod Assembly. The assembly consists of one each of AL39024, T29109, R50507 and AL39020. (Item #: 104827, Ref: AL39023) $138.42

Tie Rod Assembly - For 1030, 1040, 1120, 1350, 1550, 840, (1750, 1950N both with Swept Back Axle). Complete Tie Rod Assembly. This Assembly consists of one each of: AL39022, T25901, R50507 abd AL39020 (Item #: 104826, Ref: AL39021) $171.00

Tie Rod Assembly - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950 (with APL315/325 Front Axle, Hydro Steering), 2040, 2040S (with APL325 Front Axle, s/n 430000 - later), 2140 (Mfg in Spain, s/n 133493 - later, with APL735 Front Axle, s/n 430000 - later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750 (with APL735 Front Axle), 2755 (with APL735 Front Axle, s/n 676090 - earlier), 2850 (Mfg in Spain), Replaces John Deere OEM number AL38097, (Item #: 104849) $143.00

Tie Rod End - Tie rod end with nut, 285.75 MM (11 1/4 inches) length and open metric end port of 18 MM with 1.5 metric right hand thread pitch. 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850. Replaces AL39319, AL168693. (Item #: 104829, Ref: AL39319) $50.00

Tie Rod End - Measures Overall Length 7" (177.8 mm); top M20 X 1.5 RH Thread; bottom M18 X 1.5 RH Thread. Used on 1550, 1640, 1750, 1850, 1950, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2850. Replaces 6000103261, AL178240, AL39320 (Item #: 105181, Ref: AL39320) $51.00

Tie Rod Tube - 11.156" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 820, 830, 840, 920, 930, 1020, 1030, 1040, 1120, 1140, 1350, 1530, 1550, 1750, 1950N, 2020, 2030, 2040, 2150, 2155, 2240, 2355N, 2440, 2630, 2640, 2855N, 301A, 302, 401B, (JD300, JD400 SN# 118105 and up), JD301, JD401. (Item #: 104823, Ref: T25901) $21.40

Tie Rod Tube - 12.218" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 1950, (2020 with swept back axle), 2030, 2120, 2150, 2155, 2240, 2250, 2350, 2355, 2550, 2555, 2630, 2640, 2755, JD301, JD401. (Item #: 128344, Ref: T29109) $34.90

Tie Rod Tube - This Tie Rod Tube measures: 7.920 inches long, 0.812 inches inside diameter, 1.125 inch - 12 thread outside diameter. It is used on 1020, 1030, 1040, 1120, 1140, 1530, 1630, 1641F, 1750, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2355N, 2630, 820 (3 Cyl), 830 (3 Cyl), 920. Replaces T29106 (Item #: 104824, Ref: T29106) $22.50

No
Picture
Tie Rod Tube - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500, 6500L, 6510, 6510L, 6510S, 6520, 6520L, Replaces John Deere OEM number L39324, 32.75" Long, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104833) $180.54

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N serial number 430000 and up, 2550, 2555, 2650, 2855N (Item #: 124687, Ref: E1NN3B626AA) $78.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1750 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy