FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 1840 Parts

Category: Steering

[Categories] [All 1840 Parts] [All John Deere Models]

Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124660, Ref: L35603) $382.00

Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124661, Ref: L35604) $230.00

Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref: AL33349) $240.62

Axle Shaft with Yoke - Used on ZF APL351 Mechanical Four Wheel Drive front ends, this shaft and yoke is 35.50 inches from center of the u-joint to the end. It has 21 teeth. This part replaces OEM numbers ZP1927573, 3230278R1, AL32884. John Deere 940, 1040, 1140, 1550, 1750, 1840, 1850, 2040, 2040, 2040S, 2140, 2150, 2240 (Item #: 160162, Ref: AL32884) $338.00

No
Picture
Back-Up Ring - For John Deere tractor models 1640 (s/n 429999-earlier, Europe), 1840 (s/n 429999-earlier, Europe), 2040 (s/n 429999-earlier, Europe), 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040, 3055, 3140, 3150, 3155, 3255, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 7445, 7450, 7455, 9930, 9935, 9960, 9965, 9970, 9976, Replaces John Deere OEM number L58009, Back-up Ring for Hydrostatic Steering Unit, (Item #: 165395) $15.98

Bellcrank - For John Deere tractor models 1640, 1840 (W/Center Knuckle), 2040, 2250, 2350, 2355, 2555, 2755, Replaces John Deere OEM number AL55151, (Item #: 104920) $159.00

Bellcrank - For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, Replaces John Deere OEM number AL55149, (Item #: 104921) $199.00

Center Steering Arm Pin Bushing - Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Item #: 179918, Ref: JD10137) $28.67

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $42.10

Drag Link Assembly - This Drag Link Assembly is used on 1640, 1840, 2040, 2040S, 2140, 2350, 2550, 2650, 2650N, 2850, 2355, 2555, 2755, 2855N. Replaces OEM Part Numbers AL38638, AL82836 (Item #: 165952, Ref: AL38638) $86.00

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Front Axle Bushing - For John Deere tractor models 1020, 1520, 1640, 1840, 2020, 2030, 2040, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2750, 2755, 2850, 2855, Replaces John Deere OEM number T21553, (Item #: 121434) $9.20

Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Item #: 111973, Ref: T21669) $12.00

Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Item #: 113981, Ref: T23170) $9.20

Front Axle Pin - This Pin Measures 1.575 inches outside diameter and is 3.735 inches long. Replaces John Deere part numbers L55437, AL55410, 47M7003, L34070 (Item #: 161647, Ref: L55437) $36.00

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839) $63.00

Oil Seal - Used in Mechanical Four Wheel Drive front axles, this seal measures 75mm inside diameter, 95mm outside diameter and 10mm wide. Used on John Deere 940, 1040, 1140 up to serial number 621999, 1550, 1640, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2850, 3040, 3050, 3140, 3350, 533, 633, 733, 833, 485, 585, 685, 785, 885, 743, 644, 744, 844, 844S, 745, 745S, 856, 5600, 6600, 5700, 6700. Used on ZF APL1251, APL1351, APL1552 axles. (Item #: 186986, Ref: AL32888) $6.30

Pivot Pin, Rear - 4.22" long, 1.49" O.D.. For tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N. (Item #: 172464, Ref: L57725) $51.00

Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Item #: 164180, Ref: L40010) $279.00

Power Steering Column Repair Kit - Used on John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 3030, 3120, 3130, 820, (3 cylinder) 830 (3 cylinder), 940, this kit repairs columns on tractors with Power Steering. Replaces John Deere part numbers AT315816, AT26188 (Item #: 109848, Ref: AT315816) $75.00

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Item #: 113860, Ref: R79152) $64.98

Spindle - Right Hand and Left Hand, Used - For John Deere tractor models 1640, 1840, 2040, 2140, 2250, 2350, 2450, 2550, 2555 (heavy-duty axles), 2650, 2750, 2755 (heavy-duty axles), 2840, 2850, 2855, 2940, 2950, 3030, 3040, 3130 (s/n after 186270), 3140, 3150 (standard duty), Replaces John Deere OEM number AR74606, Right or Left Side, Dimension A: 14.750", Dimension B: 1.750", Dimension C: 1.795", Dimension D: 1.312", For a new version of this item use Item #: 102220, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402220) $112.01

$John Deere 1840 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For John Deere tractor models 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2140, 2250 (with 44.5mm king pin), 2350, 2355, 2450, 2550, 2555, 2650, 2755 (Hi-Version), 2850, Replaces John Deere OEM number AL28222, Dimension A: 14.875", Dimension B: 1.500", Dimension C: 1.795", Dimension D: 1.312", Left or Right Side, (Item #: 102217) $156.00

$John Deere 1840 Spindle LH\RH$
Spindle LH/RH - Measures A = 11.875", B = 1.375", C = 1.375", D =.842" REPLACES OEM numbers : AR49589, AT23636. Fits:1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2040, 2120, 2150, 2155 (mid-hi axle), 2250 (swept back), 2350 (low profile), 2355 (mid-hi axle), 2450, 2550, 2555 (mid-hi axle), 2755 (mid-hi axle), 820, 830, 840, 920, 930, 940, 1035. Wheel Bearing kit available separately as p/n WBKJD3. (Item #: 102216, Ref: AR58606) $148.00

Steering Arm - Left Hand - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, 4555, Replaces John Deere OEM number L28315, LH Steering Arm, (Item #: 104932) $78.98

Steering Arm - Right Hand - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, 4555, Replaces John Deere OEM number L28314, RH Steering Arm, (Item #: 104931) $127.00

Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Item #: 115654, Ref: T23118) $9.90

Steering Arm, Left Hand, Used - For John Deere tractor models 1640, 1830, 1840, 2040, 2140, 2250, 2350, 2355, 2450, 2555, 2650, 2755, 2850, Replaces John Deere OEM number L28315, Left Hand, For a new version of this item use Item #: 104932, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404932) $87.01

Steering Motor - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2755, 2850, 3050, 3350, Replaces John Deere OEM number AL41631, (Item #: 164464) $414.00

Thrust Washer - For John Deere tractor models 301, 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355 (HD Axles), 2450, 2550, 2555 (HD Axles), 2640 (With Straight Non-Adj. Axle s/n 341000-later), 2650, 2750, 2755 (HD Axles), 2840, 2850, 2940, 3040, 3130 (s/n 186270-later), 3140, 3150 (STD Duty), 3350 (STD Duty), Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310 (s/n 237997-earlier), 400, 401, 480A, 480B, Replaces John Deere OEM number T31749, (Item #: 158880) $6.00

Thrust Washer - For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2640 (s/n 341000-later), 2650, 2750, 2755, 2840, 2850, 2940, 2950, 3040, 3130 (s/n 186270-later), 3140, 3150, 3350, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310 (s/n 237997-earlier), 400, 401, 480A, 480B, Replaces John Deere OEM number T34548, (Item #: 163643) $1.60

Tie Rod - 3.880" long, 24mm dia. For tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N. Replaces AL37504. (Item #: 104795, Ref: AL82826) $25.50

Tie Rod - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110L, 6120L, 6200, 6200L, 6210L, 6300, 6300L, 6310L, 6310S, 6400, 6400L, 6410L, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, Replaces John Deere OEM number AL37204, Length: 18.750", Width: 1.250", (Item #: 160188) $36.98

Tie Rod Assembly - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950 (with APL315/325 Front Axle, Hydro Steering), 2040, 2040S (with APL325 Front Axle, s/n 430000 - later), 2140 (Mfg in Spain, s/n 133493 - later, with APL735 Front Axle, s/n 430000 - later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750 (with APL735 Front Axle), 2755 (with APL735 Front Axle, s/n 676090 - earlier), 2850 (Mfg in Spain), Replaces John Deere OEM number AL38097, (Item #: 104849) $143.00

Tie Rod Assembly - For John Deere tractor models 1640 (Standard Clearance Axle), 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, Replaces John Deere OEM number AL82828, AL37505, AL32308, AL82826, L32307, L64251, (Item #: 160190) $146.98

No
Picture
Tie Rod Boot - For John Deere tractor models 1640, 1840, 2040, 2940, 3040, 3140, 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4955, 4960, 7210, 7410, 7510, 7600, 7610, 7700, 7710, 7810, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, Compatible with John Deere Combine (s) 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, Compatible with John Deere Harvester (s) 7200, 7400, 7800, Replaces John Deere OEM number R78027, (Item #: 110514) $5.98

Tie Rod End - This Tie Rod End is 12.620 Inches long, 0.865 Inch Diameter Shaft with 6 notches. Used on 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2555, 2650, 2755, 2850, 2940, 2955, 3055, 3255. It replaces AL177945, AL27533, AL37505, AL82825 (Item #: 104796, Ref: AL37505) $22.50

Tie Rod Tube - For John Deere tractor models 1640, 1830, 1840, 2040, 2130, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, Replaces John Deere OEM number L32308, 13.940" Long, (Item #: 104831) $73.00

No
Picture
Tie Rod Tube - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500, 6500L, 6510, 6510L, 6510S, 6520, 6520L, Replaces John Deere OEM number L39324, 32.75" Long, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104833) $180.54

Tie Rod, Inner - Inner Tie Rod. 1-1/8" inner diameter, 5-3/4" to center of post. For JD JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F, 1840, 2020, 2120, 2150, 2240, 2255, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, 840, 920, 930, 940 tractors (Item #: 102248, Ref: AT27130) $29.00

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1840 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy