FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2040 Parts

Category: Steering

[Categories] [All 2040 Parts] [All John Deere Models]

Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124660, Ref: L35603) $382.00

Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124661, Ref: L35604) $230.00

Axle Knee, Left Hand, Used - For John Deere tractor models 301, 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models TC44H, TC54H, TC62H, 300, 301, 400, 401, 444H, 444HLL, 450J (s/n 159986-earlier), 544H, 544HLL, 550J (s/n 159986-earlier), 550K (s/n 217276-275527, 275977-303907), 624H, 624HLL, 650J (s/n 159986-earlier), 650K (s/n 216396-275533, 275978-303837), Replaces John Deere OEM number AT22222, Replaces John Deere Casting nos T21512, Left Hand, Swept Back Axle, Height: 9 1/2", For Axle Knee, Right Hand use Item #: 430382, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430383) $234.01

Axle Knee, Right Hand, Used - For John Deere tractor models 301, 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2630, 2640, Compatible with John Deere Lawn and Garden(s) 300, 400, Replaces John Deere OEM number AT22221, Replaces John Deere Casting nos T21511, Right Hand, Swept Back Axle, Height: 9 1/2", For Axle Knee, Left Hand use Item #: 430383, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430382) $234.01

Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref: AL33349) $240.62

Axle Shaft and Yoke, MFWD - Used on ZF APL1351 Mechanical Four Wheel Drive front end, this shaft is 9.39 inches long with 21 teeth. Replaces OEM numbers 3216599R91, 81927571, AL32883, ZP1927571. John Deere models 940, 1040, 1140, 1550, 1750, 1850, 2040, 2040S, 2140, 2150, 2240 (Item #: 115716, Ref: AL32883) $111.98

Axle Shaft with Yoke - Used on ZF APL351 Mechanical Four Wheel Drive front ends, this shaft and yoke is 35.50 inches from center of the u-joint to the end. It has 21 teeth. This part replaces OEM numbers ZP1927573, 3230278R1, AL32884. John Deere 940, 1040, 1140, 1550, 1750, 1840, 1850, 2040, 2040, 2040S, 2140, 2150, 2240 (Item #: 160162, Ref: AL32884) $338.00

No
Picture
Back-Up Ring - For John Deere tractor models 1640 (s/n 429999-earlier, Europe), 1840 (s/n 429999-earlier, Europe), 2040 (s/n 429999-earlier, Europe), 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040, 3055, 3140, 3150, 3155, 3255, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 7445, 7450, 7455, 9930, 9935, 9960, 9965, 9970, 9976, Replaces John Deere OEM number L58009, Back-up Ring for Hydrostatic Steering Unit, (Item #: 165395) $15.98

Bellcrank - For tractor models (2440, 2640 serial number up to 308804 with 49 inch-79 inch swept back adj. axle), (2040, 2240 serial number up to 349999 with swept back adj. axle), (1530 with straight or swept back adj. axles), (JD301, JD401, 2630, 820, 830 with swept back adj. axle), (1020, 2020, with 44 inch-66 inch or 48 inch-78 inch swept back adj. axle), (1520 with 48 inch-78 inch swept back adj. axle), (JD300, JD400 without loader/backhoe with swept back adj. axle). (Item #: 104915, Ref: AR92944) $328.68

Bellcrank - Casting #T21504. For tractor models (300, 301, 400, 401, 820, 830, 1020, 1520, 1530, 2020, 2630 all with swept back axle), (2030 SN# up to 187300 with swept back axle), (2040, 2240 SN# up to 349999 with swept back axle), (2440, 2640 SN# up to 308804 with swept back axle). (Item #: 104914, Ref: AT19794) $276.00

Bellcrank - For John Deere tractor models 1640, 1840 (W/Center Knuckle), 2040, 2250, 2350, 2355, 2555, 2755, Replaces John Deere OEM number AL55151, (Item #: 104920) $159.00

Bellcrank - For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, Replaces John Deere OEM number AL55149, (Item #: 104921) $199.00

Bellcrank, Used - For John Deere tractor models 820, 830, 920, 1020, 1120, 1530, 2020, 2030 (s/n187300-earlier W/Swept Back Adjustable Axle), 2040, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number AT19794, Replaces Casting nos T21504, For a new version of this item use Item #: 104914, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404914) $184.01

Center Steering Arm Pin - Please check dimensions before ordering. Pin is 5.690" long X 1.499" diameter. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Center Steering Arm Pin. Used with Center Steering Arms: AR91812, AR92945, AR91811 and AR92944. (Item #: 173277, Ref: 91811S) $38.94

Center Steering Arm Pin Bushing - Measuring 1.500 inches inside diameter, 1.875 inches outside diameter and 1.000 inches wide, this bearing is used on John Deere models: 820, 1020, 1520, 2020, 3120, 830, 1530, 2630, 3030, 3130, 2040, 2240, 2444, 2640, 2840, 2150, 2155, 301, 302, 401, 401B (Item #: JD8827) $21.76

Center Steering Arm Pin Bushing - Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Item #: 179918, Ref: JD10137) $28.67

No
Picture
Differential Cross Shaft, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, Compatible with John Deere Combine(s) 1165, 1175, 4425, 4435, Replaces John Deere OEM nos L29226, T21875, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436093) $20.01

Differential Lock Pedal, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 478686-earlier), 1830, 2030, 2040, 2040S (s/n 478686-earlier), 2240, 2440, 2640, Replaces John Deere OEM nos T27430, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434013) $66.01

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $42.10

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $42.10

No
Picture
Differential Thrust Washer, Used - For John Deere tractor models 1030, 1130, 1630, 1640 (s/n 430000-later), 1830, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2155 (s/n 765146-earlier), 2255, 2350, 2355, 2355N, 2550, 2555, 2651, 2750, 2755, 2840, 2855N, 2940, 2950, 2951, 2955 (s/n 765516-earlier), 3030, 3030 (s/n 184540-later), 3055, 3120, 3130, 3130 (s/n 184540-later), 3141, 3150, 3155 (s/n 738221-earlier), 3255, 3351, 3640, 3641, 3651, Replaces John Deere OEM number L31793, For a new version of this item use Item #: 161853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449535) $4.76

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

Drag Link Assembly - This Drag Link Assembly is used on 1640, 1840, 2040, 2040S, 2140, 2350, 2550, 2650, 2650N, 2850, 2355, 2555, 2755, 2855N. Replaces OEM Part Numbers AL38638, AL82836 (Item #: 165952, Ref: AL38638) $86.00

Drag Link Assembly - 35.781 Long For 820, 830, 1020, 1520, 1530, 2040, 2240 (To S#349999). (Item #: 102274, Ref: AR68818) $85.00

Drang Link Shaft Cover Gasket - For John Deere tractor models 830 (3 Cyl.), 840, 930, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1750, 1830, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2355N, 3030, 3130, Replaces John Deere OEM number L62423, L35654, T21527, (Item #: 161827) $3.20

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Front Axle Bushing - For John Deere tractor models 1020, 1520, 1640, 1840, 2020, 2030, 2040, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2750, 2755, 2850, 2855, Replaces John Deere OEM number T21553, (Item #: 121434) $9.20

Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Item #: 111973, Ref: T21669) $12.00

Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Item #: 113981, Ref: T23170) $9.20

Front Axle Pin - This Pin Measures 1.575 inches outside diameter and is 3.735 inches long. Replaces John Deere part numbers L55437, AL55410, 47M7003, L34070 (Item #: 161647, Ref: L55437) $36.00

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855, 2855N (Item #: 124593, Ref: L60747) $13.30

Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following John Deere models: 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2855N (Item #: 124592, Ref: L60748) $15.20

Hub - For tractor models 300, 301, 400, 401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 serial number under 340999. Hub, 6 Bolt. Uses wheel bolt # WB916 9/16-18 x 1.69 inch. (Item #: 104768, Ref: T25809) $49.80

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $64.00

Hub, Front Wheel, 6 Bolt - 6 Bolt Hub uses p/n WBKJD3 wheel bearing kit and p/n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755 (Mid-Hi axle), 820, 830, 840. (Item #: 102233, Ref: R47076) $62.00

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839) $63.00

Joint Assembly, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this part replaces OEM part numbers 1968450C1, 81430C1, 83961165, AL63606, AL38018, AL64250, ZP7029910201. This axle was used on John Deere models: 1640 axle serial number 048739 and up, 2040 axle serial number 048739 and up, 2040S axle serial number 048739 and up, 2350 axle serial number 048739 and up, 2355 serial number prior to 629298, 2550 axle serial number 048739 and up, 2555 serial number prior to 629299, 2650 serial number prior to 629299. (Item #: 156193, Ref: AL63606) $612.00

Oil Seal - Used in Mechanical Four Wheel Drive front axles, this seal measures 75mm inside diameter, 95mm outside diameter and 10mm wide. Used on John Deere 940, 1040, 1140 up to serial number 621999, 1550, 1640, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2850, 3040, 3050, 3140, 3350, 533, 633, 733, 833, 485, 585, 685, 785, 885, 743, 644, 744, 844, 844S, 745, 745S, 856, 5600, 6600, 5700, 6700. Used on ZF APL1251, APL1351, APL1552 axles. (Item #: 186986, Ref: AL32888) $6.30

Orbital Steering Unit Seal Kit - Used on Danfoss Orbital Steering units on John Deere models: 1640, 2040, 2140, 3040, 3140, 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050, 3350, 3650. This Kit replaces John Deere part number AL112819 (Item #: 165413, Ref: 1810503M92) $29.80

No
Picture
Packing - Washer, R39304 - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2440 (s/n 340999-earlier), 2550, 2555, 2630, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 3640 (s/n 341000-later), 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8630, 8640, 8850, Compatible with John Deere Construction and industrial models 415B, 515B, Replaces John Deere OEM number R39304, (Item #: 117267) $2.40

Pivot Pin - Rear - For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 380, 400, 401, 401B, 401C, 401D, 480, 480A, 480B, 480C, Replaces John Deere OEM number R54195, Length: 4.100", Diameter: 1.5727", (Item #: 128476) $46.00

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 2040, 2040S, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855N (Item #: 124690, Ref: L53819) $2.40

Pivot Pin, Rear - 4.22" long, 1.49" O.D.. For tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N. (Item #: 172464, Ref: L57725) $51.00

Planetary Carrier Housing - Used on ZF APL-325 Axles. Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Item #: 127236, Ref: VPR6067) $1199.01

Planetary Drive Shaft - Left Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1630, 1640 (s/n 430000-later), 1830, 2020 (s/n 430000-later), 2030, 2040 (s/n 430000-later), 2150 (s/n 430000-later), 2240 (s/n 350000-later), 2255 (s/n 430000-later), 2350, 2440 (s/n 340999-earlier), Replaces John Deere OEM number L34353, L41167, T28908, T21820, T31086, T71926, Left Hand, Splines: 23, Teeth: 12, For a new version of this item use Item #: 126904, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430032) $89.01

Planetary Drive Shaft - Right Hand, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2355N, 2550, 2555, 2750, 2755, 2855N, Replaces John Deere OEM nos L36201, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430030) $100.01

Planetary Drive Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2355N, 2550, 2555, 2750, 2755, 2855N, Replaces John Deere OEM nos L36202, Teeth: 15, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430028) $160.01

Planetary Gear - Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Item #: 124631, Ref: VPJ7852) $108.00

Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Item #: 164180, Ref: L40010) $279.00

Planetrary Drive Shaft - Right Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 350000-earlier), 2040 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-earlier), 2255, 2350, 2440 (s/n 340999-earlier), Replaces John Deere OEM number L41166, T28907, L34168, T21821, Right Hand, Splines: 23, Teeth: 12, For a new version of this item use Item #: 126897, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430033) $100.01

Power Steering Column Repair Kit - Used on John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 3030, 3120, 3130, 820, (3 cylinder) 830 (3 cylinder), 940, this kit repairs columns on tractors with Power Steering. Replaces John Deere part numbers AT315816, AT26188 (Item #: 109848, Ref: AT315816) $75.00

Power Steering Hand Pump - For John Deere tractor models 1640, 2040, 2040S, 2140, 2141, 2251, 2351, 2541, 2651, 2941, 2951, 3040, 3050, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3650, 3651, Replaces John Deere OEM number AL41291, (Item #: 164832) $208.98

Power Steering Kit - Contains all parts necessary to convert manual steering to power steering includes belt driven pump and reservoir, mounting flange, power steering cylinder, hydraulic pump, oil tank, pressure tube, inlet hose, 2 tie rod ends, pump connection, v-belt, pulley, and hardware. For tractor models 2030, (2040 diesel), 2130. (Item #: 191064, Ref: PSKJD2) $1068.51

Power Steering Overhaul Kit - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, Replaces John Deere OEM number AT315816, (Item #: 115328) $76.98

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Item #: 113860, Ref: R79152) $64.98

Power Steering Shaft - This Power Steering Shaft is used on John Deere 820, 830, 1020, 1520, 2020, 1030, 1530, 2030, 2130, 2630, 2040, 2240, 2640, 2150, 2350, 2155, 2355, 300, 400, 310, 401, 302. Replaces L29199 (Item #: 112629, Ref: L29199) $242.98

Power Steering Valve Tie Rod - This Power steering valve tie rod measures 5.625 inches (136.25mm) Center to Center, an Inside Diameter of 0.624 inch (15.86mm) on one side and 0.75 inch (19mm) on the other side. Used on 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 300 Indust/Const, 301 Indust/Const, 310 Indust/Const, 400 Indust/Const, 401 Indust/Const, 820, 830 It replaces original part number T25324 (Item #: 162164, Ref: T25324) $90.00

Roller Bearing with Cup MFWD - Used on ZF APL315, APL325, and APL330 Mechanical Four Wheel Drive Axles, the pivot bearing replaces OEM part numbers 1342525C2, 1342525C1, 81416C1, 81417C1, 83958377, AL63617, ZP0750117306, LM72848 and LM72810. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 1950, 2040, 2250, 2450, 2650 (Item #: 124691, Ref: AL63617) $45.90

No
Picture
Spider U-Joint Assembly - For John Deere tractor models 1550 (s/n 750789-later), 1550 (s/n 720000-750788), 1640 (s/n 038265-048738), 1750 (s/n 720000-750788), 1850 (s/n 720000-later), 1850N, 1950 (s/n 720000-later), 1950N, 2040 (s/n 038265-048738, 450000-later), 2040S (s/n 038265-048738, 450000-later), 2250, 2350 (s/n 038265-048738), 2355, 2450, 2550 (s/n 038265-048738), 2555, 2650, 2650N, 2755, 2850, Replaces John Deere OEM number AL64255, AL65195, AL64126, AL71316, (Item #: 176288) $88.00

Spindle - This is used as right or left hand spindle. Vertical length is 14.98 inches, 1.750 inches shaft Diameter. Fits row crop tractors with adjustable axles. For tractor models 1640, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 3040, 3140. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 102220, Ref: TP-AR74606) $193.00

Spindle - Right Hand and Left Hand, Used - For John Deere tractor models 1640, 1840, 2040, 2140, 2250, 2350, 2450, 2550, 2555 (heavy-duty axles), 2650, 2750, 2755 (heavy-duty axles), 2840, 2850, 2855, 2940, 2950, 3030, 3040, 3130 (s/n after 186270), 3140, 3150 (standard duty), Replaces John Deere OEM number AR74606, Right or Left Side, Dimension A: 14.750", Dimension B: 1.750", Dimension C: 1.795", Dimension D: 1.312", For a new version of this item use Item #: 102220, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402220) $112.01

$John Deere 2040 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For John Deere tractor models 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2140, 2250 (with 44.5mm king pin), 2350, 2355, 2450, 2550, 2555, 2650, 2755 (Hi-Version), 2850, Replaces John Deere OEM number AL28222, Dimension A: 14.875", Dimension B: 1.500", Dimension C: 1.795", Dimension D: 1.312", Left or Right Side, (Item #: 102217) $156.00

Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Item #: 113923, Ref: T21539) $11.60

Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2282T (Item #: 115287, Ref: M2282T) $4.70

$John Deere 2040 Spindle LH\RH$
Spindle LH/RH - Vertical shaft length 11.875 inches, shaft diameter 1.375 inches, spindle inside bearing flat 1.375 inch, spindle outside bearing flat .842 inch. Keyway is to the rear. REPLACES: AR52861. Fits 1020, 1520, 1530, 2020 (swept back), 2030, 2040, 2240, 2440 (< serial number 340999), 2630, 2640 (< serial number 340999), 820, 830. Wheel Bearing Kit available separately part number WBKJD3. Replaces AR103472, AR52861. (Item #: 102210, Ref: AR103472) $143.00

$John Deere 2040 Spindle LH\RH$
Spindle LH/RH - Measures A = 9.875 inch, B = 1.375 inch C = 1.375 inch, D =.842 inch. REPLACES OEM numbers: AR52862, AR58608. Fits: 1020 and 1520 (swept back), 1530, 1641, 1641F, 2020 (swept back), 2030 (< serial number 187300), 2040, 2240, 820, 830. Wheel Bearing Kit available separately as part number WBKJD3. (Item #: 102212, Ref: AR103473) $96.00

$John Deere 2040 Spindle LH\RH$
Spindle LH/RH - Measures A = 11.875", B = 1.375", C = 1.375", D =.842" REPLACES OEM numbers : AR49589, AT23636. Fits:1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2040, 2120, 2150, 2155 (mid-hi axle), 2250 (swept back), 2350 (low profile), 2355 (mid-hi axle), 2450, 2550, 2555 (mid-hi axle), 2755 (mid-hi axle), 820, 830, 840, 920, 930, 940, 1035. Wheel Bearing kit available separately as p/n WBKJD3. (Item #: 102216, Ref: AR58606) $148.00

Spindle Thrust Bearing - This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Item #: 104207, Ref: JD8407) $10.30

Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2283T (Item #: 115286, Ref: M2283T) $2.62

Steering Arm - Left Hand - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, 4555, Replaces John Deere OEM number L28315, LH Steering Arm, (Item #: 104932) $78.98

Steering Arm - Right Hand - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, 4555, Replaces John Deere OEM number L28314, RH Steering Arm, (Item #: 104931) $127.00

Steering Arm - Right Hand, Used - For John Deere tractor models 820, 830, 840, 920, 930, 1020, 1120, 1140, 1520, 1530, 1630, 1641, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number T21517, Right Hand, For a new version of this item use Item #: 104955, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404955) $50.01

Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Item #: 115654, Ref: T23118) $9.90

Steering Arm Pin, Center - 1.249" diameter, 5.230" long. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Used with AT52868, AT52867, AT19793, AR93359, AR93358 and AT19794 center steering arms. Please check dimensions before ordering. (Item #: 163531, Ref: 93358S) $49.60

Steering Arm, LH - For tractor models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Item #: 104954, Ref: T21518) $289.34

Steering Arm, LH, Used - For John Deere tractor models 820, 830, 840, 920, 930, 1020, 1120, 1140, 1520, 1530, 1630, 1641, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2355N, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number T21518, Left Hand, With Swept Back Front Axle, For a new version of this item use Item #: 104954, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404954) $75.01

Steering Arm, Left Hand, Used - For John Deere tractor models 1640, 1830, 1840, 2040, 2140, 2250, 2350, 2355, 2450, 2555, 2650, 2755, 2850, Replaces John Deere OEM number L28315, Left Hand, For a new version of this item use Item #: 104932, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404932) $87.01

Steering Arm, RH - For tractor models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Item #: 104955, Ref: T21517) $165.00

Steering Arm, Used - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2440, 2630, 2640, 3120, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number T28272, Replaces Casting nos T22525, For a new version of this item use Item #: 163451, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498801) $158.01

Steering Column Sleeve, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955, 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 1166, 1169, 1174, 1174H4, 1177, 1177H4, 1188, 1188H4, 4435, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 7455, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976, Compatible with John Deere Construction and industrial models 762, 762A, 762B, 862, 862B, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos R51153, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434514) $23.76

Steering Control Unit - For tractor models (1640, 2040, 2040S, 2140 SN# up to 558049 with SG2 Cab), (2940 SN# up to 376553), (3040, 3140 all SN# up to 557668 or with cab SN# up to 558049), (1640, 2040, 3040, 3140 all european edition SN# up to 429999), (2040S, 2140 european edition SN# up to 429999 with OPU Cab), (3140, 3340 spain edition). Replaces AL35832, AL28268. (Item #: 164461, Ref: AL55954) $537.08

No
Picture
Steering Coupler, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430 (1974-1981), 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Combine(s) 1166, 1169, 1174, 1177, 1188, 4435, Compatible with John Deere Harvester(s) 7440, 9920, 9940, 9950, 9970, Compatible with John Deere Scraper(s) 762, 762A, 762B, 862, 862B, Replaces John Deere OEM nos R50869, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446969) $29.01

Steering Lever, Used - For John Deere tractor models 2040 (s/n 350000-later), 2150, 2240 (s/n 350000-later), 2255, Replaces John Deere OEM nos L37326, L42081, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452456) $140.01

No
Picture
Steering Motor - For John Deere tractor models 1641, 2040, 2140, 2141, 2251, 2351, 2541, 2651, 2941, 2951, 3141, 3351, 3641, Replaces John Deere OEM number AL41604, (Item #: 164463) $597.00

Steering Motor - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2755, 2850, 3050, 3350, Replaces John Deere OEM number AL41631, (Item #: 164464) $414.00

Steering Release Rod, Used - For John Deere tractor models 1640 (with SG2 s/n 43000-later), 2040 (with SG2 s/n 43000-late), 2040S (with SG2 s/n 43000-later), 2140 (with SG2 s/n 43000-late), 2350 (with SGB), 2355 (with SGB), 2550 (with SGB), 2555 (with SGB), 2650 (with SGB), 2650N (with SGB), 2750 (with SGB), 2755 (with SGB), 2850, 2940, 2950 (with SGB), 2955 (with SGB), 3040 (with SGB s/n 43000-later), 3055, 3140 (with SGB s/n 43000-later), 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560 (4630), 4630, 4640, 4650, 4755, 4760, 4840 (4850), 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Combine(s) 4435, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 9920, 9930, 9935, 9940, 9960, 9965, 9970, 9976, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos AR54808, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499865) $15.51

Steering Shaft, Used - For John Deere tractor models 820, 830 (1020), 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM nos T36482, L42079, Replaces John Deere Casting nos T21546, Casting No T21546, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498407) $375.01

No
Picture
Steering Valve Assembly - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, AL31515, AL70699, AT23175, RE10800, Only for use with closed center hydraulic system, Tall Housing - 15-1/2", Comes primered (color may vary). Prior to painting check fitment, For a Remanufactured version of this sku use Item #: 205195, (Item #: 109847) $750.00

Steering Valve Assembly, Remanufactured, AL31515 - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31515, AL31262, AL70699, AT23175, RE10800, Marked L34450, R58041, R77312, R77314, T25295, For a New version of this sku use Item #: 109847, (Item #: 205195) $660.01

Steering Valve Assembly, Remanufactured, AL31515 - For John Deere tractor models 820, 830 (s/n 258365-earlier), 920, 930 (s/n 258365-earlier), 2040 (s/n 266749-earlier), Replaces John Deere OEM number AL31515, AL70699, AT23175, RE10800, All using open center hydraulic system, Marked L34450, R58041, R77312, R77314, T25295, Universal hydraulic oil (2.5 gallon) use Item #: 124173, Additional Handling and Oversize Fees Apply To This Item, (Item #: 205392) $1100.01

Steering Valve Assembly, Used - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, RE10800, AL31515, AL70699, AT23175, For a new version of this item use Item #: 205195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409847) $530.01

Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 and up, 4000, 4020 serial number 201000 and up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Item #: 113508, Ref: T22875) $62.00

Steering Wheel - 16-5/8" dia. 7/8 splined hub, textured finish. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2520, 2630, 2640. (Item #: 101450, Ref: AL28457) $48.00

No
Picture
Steering Wheel - This steering wheel is 16-5/8" inch diameter and has a 7/8 inch splined hub, with smooth finish. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2520, 2630, 2640. The proper cap to order for this steering wheel is part number AL155227. (Item #: 101448, Ref: AL28457-S) $58.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Item #: 157780, Ref: 353435X1) $1.00

No
Picture
Steering Wheel, Used - For John Deere tractor models 940, 1030, 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1850, 2040, 2040S, 2130, 2140, 2650, 2750, 2840, 2850, 2940, 2950, 3030, 3040, 3130, 3140, Replaces John Deere OEM number AL28458, L28988, 17-1/2" diameter, 7/8", 36 splined hub, 3 covered spokes, For a new version of this item use Item #: 101449, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435285) $26.01

Thrust Washer - For John Deere tractor models 301, 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355 (HD Axles), 2450, 2550, 2555 (HD Axles), 2640 (With Straight Non-Adj. Axle s/n 341000-later), 2650, 2750, 2755 (HD Axles), 2840, 2850, 2940, 3040, 3130 (s/n 186270-later), 3140, 3150 (STD Duty), 3350 (STD Duty), Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310 (s/n 237997-earlier), 400, 401, 480A, 480B, Replaces John Deere OEM number T31749, (Item #: 158880) $6.00

Thrust Washer - For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2640 (s/n 341000-later), 2650, 2750, 2755, 2840, 2850, 2940, 2950, 3040, 3130 (s/n 186270-later), 3140, 3150, 3350, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310 (s/n 237997-earlier), 400, 401, 480A, 480B, Replaces John Deere OEM number T34548, (Item #: 163643) $1.60

Tie Rod - 3.880" long, 24mm dia. For tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N. Replaces AL37504. (Item #: 104795, Ref: AL82826) $25.50

Tie Rod - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110L, 6120L, 6200, 6200L, 6210L, 6300, 6300L, 6310L, 6310S, 6400, 6400L, 6410L, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, Replaces John Deere OEM number AL37204, Length: 18.750", Width: 1.250", (Item #: 160188) $36.98

Tie Rod Assembly - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950 (with APL315/325 Front Axle, Hydro Steering), 2040, 2040S (with APL325 Front Axle, s/n 430000 - later), 2140 (Mfg in Spain, s/n 133493 - later, with APL735 Front Axle, s/n 430000 - later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750 (with APL735 Front Axle), 2755 (with APL735 Front Axle, s/n 676090 - earlier), 2850 (Mfg in Spain), Replaces John Deere OEM number AL38097, (Item #: 104849) $143.00

Tie Rod Assembly - For John Deere tractor models 1640 (Standard Clearance Axle), 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, Replaces John Deere OEM number AL82828, AL37505, AL32308, AL82826, L32307, L64251, (Item #: 160190) $146.98

No
Picture
Tie Rod Boot - For John Deere tractor models 1640, 1840, 2040, 2940, 3040, 3140, 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4955, 4960, 7210, 7410, 7510, 7600, 7610, 7700, 7710, 7810, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, Compatible with John Deere Combine (s) 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, Compatible with John Deere Harvester (s) 7200, 7400, 7800, Replaces John Deere OEM number R78027, (Item #: 110514) $5.98

Tie Rod End - This Tie Rod End is 12.620 Inches long, 0.865 Inch Diameter Shaft with 6 notches. Used on 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2555, 2650, 2755, 2850, 2940, 2955, 3055, 3255. It replaces AL177945, AL27533, AL37505, AL82825 (Item #: 104796, Ref: AL37505) $22.50

Tie Rod End - Measures Overall Length 7" (177.8 mm); top M20 X 1.5 RH Thread; bottom M18 X 1.5 RH Thread. Used on 1550, 1640, 1750, 1850, 1950, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2850. Replaces 6000103261, AL178240, AL39320 (Item #: 105181, Ref: AL39320) $51.00

Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Replaces AT23885 (Item #: 102249, Ref: AT23885) $29.40

No
Picture
Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830 (Item #: 102249, Ref: TP-AT23885) $29.40

Tie Rod Tube - 11.156" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 820, 830, 840, 920, 930, 1020, 1030, 1040, 1120, 1140, 1350, 1530, 1550, 1750, 1950N, 2020, 2030, 2040, 2150, 2155, 2240, 2355N, 2440, 2630, 2640, 2855N, 301A, 302, 401B, (JD300, JD400 SN# 118105 and up), JD301, JD401. (Item #: 104823, Ref: T25901) $21.40

Tie Rod Tube - This Tie Rod Tube measures: 7.920 inches long, 0.812 inches inside diameter, 1.125 inch - 12 thread outside diameter. It is used on 1020, 1030, 1040, 1120, 1140, 1530, 1630, 1641F, 1750, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2355N, 2630, 820 (3 Cyl), 830 (3 Cyl), 920. Replaces T29106 (Item #: 104824, Ref: T29106) $22.50

Tie Rod Tube - For John Deere tractor models 1640, 1830, 1840, 2040, 2130, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, Replaces John Deere OEM number L32308, 13.940" Long, (Item #: 104831) $73.00

No
Picture
Tie Rod Tube - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500, 6500L, 6510, 6510L, 6510S, 6520, 6520L, Replaces John Deere OEM number L39324, 32.75" Long, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104833) $180.54

Tie Rod, Outer, 8 Notch - A= 9.250", B= .781". For tractor models 1020, 1120, 1130, 1140, 1530, 1630, 1641F, 2020, 2030, 2040, 2120, 2150, 2240, 2255, 820, 830, 920, 940, 1030. (Item #: 102245, Ref: AT27131) $37.20

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Wheel Hub Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL1351 Mechanical Four Wheel Drive front ends. This part replaces, L35606, ZP1927576, 3216588R1, 81927576. Some of the models listed used more than one 4 wheel drive front end. Verify part number or axle number before ordering. Used on John Deere: 2040 serial number 350000 and up, 2150, 2240 serial number 350000 and up. (Item #: 124686, Ref: L35606) $33.20

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N serial number 430000 and up, 2550, 2555, 2650, 2855N (Item #: 124687, Ref: E1NN3B626AA) $78.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 2040 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy