FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2355N Parts

Category: Steering

[Categories] [All 2355N Parts] [All John Deere Models]

Axle Ring Gear Housing, LH, Used - For John Deere tractor models 2355N, 2555, 2651, 2755, 2855N, Replaces John Deere OEM nos AL38159, Replaces John Deere Casting nos L40373, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431025) $840.01

Ball Joint - Length is 9.25 in, diameter is 0.781". For tractor models 1020, 1030, 1120, 1140, 1530, 1550, 1630, 1641, 1641F, 1750, 1850, 1850N, 2020, 2120, 2150, 2155 (with SWEPT BACK AXLE), 2255, 2355N (with SWEPT BACK AXLE), 920, 940, 1040. (Item #: 102245, Ref: AL39019) $37.20

Ball Joint - Length is 5.00", female end diameter is 1.125" I.D.. Fits 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1641F, 1750, 1950N, 2020, 2120, 2150, 2155 (with SWEPT BACK AXLE), 2250, 2251N, 2255, 2350, 2355, 2355N (with SWEPT BACK AXLE), 2450, 2550, 2555, 2755, 2855 (with SWEPT BACK AXLE), 820, 830, 840, 920, 930. Replaces: DE16303, 14M3290, AL39020, AL68629, AT27130 (Item #: 102248, Ref: AL39020) $29.00

Ball Joint, 11 Notch - A= 12.250", B= .781". For tractor models 1120, 1350, 1950N, 2150, 2255, 820, 830, 840, 920, 930, (1750, 2155, 2355N, 2855N, 1040 all with swept back axle), 1030. (Item #: 102249, Ref: AL39022) $29.40

Bellcrank - For John Deere tractor models 2155, 2355N, 2755, 2855N, Replaces John Deere OEM number AL58215, (Item #: 104922) $152.00

Center Steering Arm Pin Bushing - Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Item #: 179918, Ref: JD10137) $28.67

No
Picture
Differential Cross Shaft, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, Compatible with John Deere Combine(s) 1165, 1175, 4425, 4435, Replaces John Deere OEM nos L29226, T21875, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436093) $20.01

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $42.10

No
Picture
Differential Thrust Washer, Used - For John Deere tractor models 1030, 1130, 1630, 1640 (s/n 430000-later), 1830, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2155 (s/n 765146-earlier), 2255, 2350, 2355, 2355N, 2550, 2555, 2651, 2750, 2755, 2840, 2855N, 2940, 2950, 2951, 2955 (s/n 765516-earlier), 3030, 3030 (s/n 184540-later), 3055, 3120, 3130, 3130 (s/n 184540-later), 3141, 3150, 3155 (s/n 738221-earlier), 3255, 3351, 3640, 3641, 3651, Replaces John Deere OEM number L31793, For a new version of this item use Item #: 161853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449535) $4.76

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

Drang Link Shaft Cover Gasket - For John Deere tractor models 830 (3 Cyl.), 840, 930, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1750, 1830, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2355N, 3030, 3130, Replaces John Deere OEM number L62423, L35654, T21527, (Item #: 161827) $3.20

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855, 2855N (Item #: 124593, Ref: L60747) $13.30

Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following John Deere models: 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2855N (Item #: 124592, Ref: L60748) $15.20

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $64.00

Hub, Front Wheel, 6 Bolt - 6 Bolt Hub uses p/n WBKJD3 wheel bearing kit and p/n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755 (Mid-Hi axle), 820, 830, 840. (Item #: 102233, Ref: R47076) $62.00

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839) $63.00

No
Picture
Packing - Washer, R39304 - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2440 (s/n 340999-earlier), 2550, 2555, 2630, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 3640 (s/n 341000-later), 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8630, 8640, 8850, Compatible with John Deere Construction and industrial models 415B, 515B, Replaces John Deere OEM number R39304, (Item #: 117267) $2.40

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 2040, 2040S, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855N (Item #: 124690, Ref: L53819) $2.40

Planetary Carrier Housing - Used on ZF APL-325 Axles. Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Item #: 127236, Ref: VPR6067) $1199.01

Planetary Drive Shaft - Right Hand, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2355N, 2550, 2555, 2750, 2755, 2855N, Replaces John Deere OEM nos L36201, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430030) $100.01

Planetary Drive Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2355N, 2550, 2555, 2750, 2755, 2855N, Replaces John Deere OEM nos L36202, Teeth: 15, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430028) $160.01

Planetary Gear - Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Item #: 124631, Ref: VPJ7852) $108.00

$John Deere 2355N Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For John Deere tractor models 1950N, 2150, 2155, 2355N, 2440, 2640 (All Low Knee 9.4"), 2855N, Compatible with John Deere Construction and industrial models 301, 302, 401, 401B, Replaces John Deere OEM number AT34973, Dimension A: 9.500", Dimension B: 1.500", Dimension C: 1.795", Dimension D: 1.312", Left or Right Side, (Item #: 104764) $528.00

Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Item #: 113923, Ref: T21539) $11.60

Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2282T (Item #: 115287, Ref: M2282T) $4.70

$John Deere 2355N Spindle LH\RH with fender mtg brkt.$
Spindle LH/RH with fender mtg brkt. - Measures A = 15.312", B = 1.375", C = 1.375", D =.842". Fits 1020, 1030, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2120, 2155 (hi-straight axle, 2355N, 940, 1040. Wheel Bearing kit available separately p/n WBKJD2 or WBKJD3 Depending on application. Verify OEM of individual parts needed your your application. (Item #: 102219, Ref: AR58607) $130.00

Spindle Thrust Bearing - This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Item #: 104207, Ref: JD8407) $10.30

Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2283T (Item #: 115286, Ref: M2283T) $2.62

Steering Arm - Left Hand, Used - For John Deere tractor models 1950N, 2150, 2155, 2240, 2251N, 2355, 2355N, 2440, 2640, 2855N, Compatible with John Deere Construction and industrial models 301, 301A, 302, 401, 401B, Replaces John Deere OEM number T36705, Left Hand, For a new version of this item use Item #: 104949, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404949) $95.01

Steering Arm, LH - For tractor models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Item #: 104954, Ref: T21518) $289.34

Steering Arm, LH, Used - For John Deere tractor models 820, 830, 840, 920, 930, 1020, 1120, 1140, 1520, 1530, 1630, 1641, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2355N, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number T21518, Left Hand, With Swept Back Front Axle, For a new version of this item use Item #: 104954, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404954) $75.01

Steering Arm, RH - For tractor models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Item #: 104955, Ref: T21517) $165.00

Tie Rod End - Used on John Deere 1850N, 1950F, 1950N, 2130, 2150, 2155, 2355N, 2840, 3030, 3120, 3130, this tie rod end measures 4.060 inches from the center of the ball joint to the end of the shaft. The threads are 24mm - 1.50. This part replaces John Deere part numbers AL26880, AL38645 (Item #: 104798, Ref: AL38645) $39.94

Tie Rod Tube - 11.156" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 820, 830, 840, 920, 930, 1020, 1030, 1040, 1120, 1140, 1350, 1530, 1550, 1750, 1950N, 2020, 2030, 2040, 2150, 2155, 2240, 2355N, 2440, 2630, 2640, 2855N, 301A, 302, 401B, (JD300, JD400 SN# 118105 and up), JD301, JD401. (Item #: 104823, Ref: T25901) $21.40

Tie Rod Tube - This Tie Rod Tube measures: 7.920 inches long, 0.812 inches inside diameter, 1.125 inch - 12 thread outside diameter. It is used on 1020, 1030, 1040, 1120, 1140, 1530, 1630, 1641F, 1750, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2355N, 2630, 820 (3 Cyl), 830 (3 Cyl), 920. Replaces T29106 (Item #: 104824, Ref: T29106) $22.50

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N serial number 430000 and up, 2550, 2555, 2650, 2855N (Item #: 124687, Ref: E1NN3B626AA) $78.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 2355N Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy