Center Steering Arm - This Center Steering Arm is used on the following non-adjustable front axles: 300B, 302, 302A, 310B, 401B, 401C, 2640 serial number 341000 and up, 301A. Replaces AT52867, AT32476 (Item #: 104928, Ref: AT52867)$372.00
Center Steering Arm - Used on John Deere models with adjustable swept back axles: 302 below 341648, 401B below serial number 341648, 2440 below serial number 340999, 2640 below serial number 340999, 301A below serial number 341648. This Center Steering Arm (Bellcrank) replaces those marked R71081 (Item #: 104927, Ref: AR93358)$306.00
Center Steering Arm Pin Bushing - Measuring 1.500 inches inside diameter, 1.875 inches outside diameter and 1.000 inches wide, this bearing is used on John Deere models: 820, 1020, 1520, 2020, 3120, 830, 1530, 2630, 3030, 3130, 2040, 2240, 2444, 2640, 2840, 2150, 2155, 301, 302, 401, 401B (Item #: JD8827)$21.76
Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Item #: 111973, Ref: T21669)$12.70
Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Item #: 113981, Ref: T23170)$9.20
Hub - For tractor models 300, 301, 400, 401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 serial number under 340999. Hub, 6 Bolt. Uses wheel bolt # WB916 9/16-18 x 1.69 inch. (Item #: 104768, Ref: T25809)$50.00
Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839)$63.00
Power Steering Shaft - This Power Steering Shaft is used on John Deere 820, 830, 1020, 1520, 2020, 1030, 1530, 2030, 2130, 2630, 2040, 2240, 2640, 2150, 2350, 2155, 2355, 300, 400, 310, 401, 302. Replaces L29199 (Item #: 112629, Ref: L29199)$242.98
Spindle, RH/LH - Measures A= 10.125", B= 1.750", C= 1.795", D= 1.312". For tractor models (300 SN# 136912 and up), 300B, 302, 302A, (310 SN# up to 237997), (400 SN# 136912 and up), 401, 401B, 401C, (480 SN# 136912 and up), 480A, 480B, (2640 SN# 341000 and up with straight non adjustable axle), 301A. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 104772, Ref: AT33636)$572.00
Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Item #: 115654, Ref: T23118)$9.90
Steering Arm, LH - For tractor models JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 301A, 302, 302A, 401B, 401C, (1020, 1520, 2030, 2640, 300B all with fixed front axle). (Item #: 104947, Ref: T21520)$259.00
Steering Arm, RH - For tractor models JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 301A, 302, 302A, 401B, 401C, (1020, 1520, 2030, 2640, 300B all with fixed front axle). (Item #: 104946, Ref: T21519)$269.00
Tie Rod Assembly - For JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 1020, 1520, 2030, 300B, 301A, 302, 302A, 401B, 401C all with Fixed Front Axles. Tie Rod Assembly (Item #: 104861, Ref: AT19823)$80.00
Tie Rod Tube - 14.44 inches long, .875 inch left hand/right hand thread. For tractor models (JD380, JD480A, JD480B all with fixed axles), (JD300, JD400, JD480, 1020, 1520, 2030, 300B, 301A, 302, 302A, 401B, 401C all with fixed front axles), (JD310 with fixed front axle serial number up to 237997), (JD401 all with fixed front axle standard with JD401A loader). (Item #: 104822, Ref: T22948)$62.00
Tie Rod, Inner - Inner Tie Rod. 1-1/8" inner diameter, 5-3/4" to center of post. For JD JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F, 1840, 2020, 2120, 2150, 2240, 2255, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, 840, 920, 930, 940 tractors (Item #: 102248, Ref: AT27130)$28.80
Universal Parts and Accessories Category: Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275)$8.00
Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279)$10.10
Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278)$13.40
Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323)$16.10
Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277)$8.90
Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280)$8.00
No Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276)$9.60
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
