FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 3050 Parts

Category: Steering

[Categories] [All 3050 Parts] [All John Deere Models]

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $42.10

Hub Seal - Used on ZF Mechanical For Wheel Drive hubs, this seal measures 5.374 inches inside diameter, 6.516 inches outside diameter and 0.507 inches wide. Replaces AL68616, ZP0750110156, 1964236C1, 81867542, 83946555. (Item #: 104717, Ref: AL68616) $48.10

Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref: ZP0750110134) $17.40

Oil Seal - Used in Mechanical Four Wheel Drive front axles, this seal measures 75mm inside diameter, 95mm outside diameter and 10mm wide. Used on John Deere 940, 1040, 1140 up to serial number 621999, 1550, 1640, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2850, 3040, 3050, 3140, 3350, 533, 633, 733, 833, 485, 585, 685, 785, 885, 743, 644, 744, 844, 844S, 745, 745S, 856, 5600, 6600, 5700, 6700. Used on ZF APL1251, APL1351, APL1552 axles. (Item #: 186986, Ref: AL32888) $6.60

Orbital Steering Unit Seal Kit - Used on Danfoss Orbital Steering units on John Deere models: 1640, 2040, 2140, 3040, 3140, 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050, 3350, 3650. This Kit replaces John Deere part number AL112819 (Item #: 165413, Ref: 1810503M92) $27.80

Pivot Bushing, Rear - For John Deere tractor models 2840, 2940, 3030, 3040, 3050, 3130, 3140, 3350, Replaces John Deere OEM number L62837, L58228, T29199, Length: 2.000", I.D. 1.526", (Item #: 170430) $16.40

Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Item #: 164180, Ref: L40010) $351.00

Power Steering Hand Pump - For John Deere tractor models 1640, 2040, 2040S, 2140, 2141, 2251, 2351, 2541, 2651, 2941, 2951, 3040, 3050, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3650, 3651, Replaces John Deere OEM number AL41291, (Item #: 164832) $208.98

Spindle - Right Hand Or Left Hand, Used - For John Deere tractor models 2955, 3050, 3055, 3255, 3350, 6010, 6100, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500L, 6505, 6510, 6510L, 6510S, 6520, 6520L, 6603, 6605, 6610, 6620, 6715, Replaces John Deere OEM number AL57855, Dimension A: 12.250", Dimension B: 1.750", Dimension C: 1.968", Dimension D: 1.312", RH/LH Spindle, For a new version of this item use Item #: 104777, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404777) $338.01

Spindle Thrust Washer - This Spindle Thrust Washer measures 1 3/4 inches inside diameter, 3 inches outside diameter. Two are used per spindle, 4 per tractor. Sold individually. (Item #: 109830, Ref: R49838) $4.80

No
Picture
Spindle Thrust Washer, Used - For John Deere tractor models 2955, 3050, 3055, 3255, 3350, 4030, 4040, 4050, 4230, 4250, 4255, 4430, 4440, 4450, 6010, 6100, 6120, 6200, 6210, 6300, 6310, 6320, 6400, 6410, 6420, 6510, 6520, 6605, 7210 (Prior S/N 010920), 7410 (Prior S/N 011540), 7510, 7600, 7610, 7700, 7710, 7810, Compatible with John Deere Combine(s) 6620, Compatible with John Deere Harvester(s) 6610, 7200, 7400, 7800, Replaces John Deere OEM number R49838, 2 Required Per Spindle, ID: 1.750", OD: 3.000", For a new version of this item use Item #: 109830, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435455) $2.70

Steering Motor - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2755, 2850, 3050, 3350, Replaces John Deere OEM number AL41631, (Item #: 164464) $414.00

No
Picture
Steering Motor - For John Deere tractor models 3050, 3140, 3350, 3640, 3650, Replaces John Deere OEM number AL55296, (Item #: 164465) $323.00

Tie Rod Assembly - Left - For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. Tie Rod Assembly - Left Hand. (Item #: 104848, Ref: AL69818) $301.00

Tie Rod Assembly - Left Hand - For John Deere tractor models 2140, 2750 (All with APL345 Front Axle), 3040, 3050, 3140 (All with APL345 Front Axle), 3150, 3350 (European Model), Replaces John Deere OEM number AL56439, Fits Left Hand Side, (Item #: 104842) $201.00

Tie Rod Assembly - Right - For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. Tie Rod Assembly - Right Hand. (Item #: 104854, Ref: AL69819) $137.00

Tie Rod Center - Measuring 9 inches overall with M24 X 1.5 right hand thread on one side and M28 X 1.5 right had thread on the other, this part is used on John Deere 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650. This part replaces AL168703, AL68253. It used with AL68254 and AL68255. (Item #: 127440, Ref: AL68253) $64.00

Tie Rod End - For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 6010, 6020, 6100, 6110, 6120, 6130, 6140J, 6155J, 6200, 6210, 6220, 6230, 6300, 6310, 6320, 6330, 6400, 6403, 6405, 6410, 6410L, 6410S, 6420, 6430, 6500, 6510, 6520, 6530, 6534, 6603, 6605, 6610, 6620, 6630, 7130, 7230, 7405, 7420, 7425, 7500, 7525, Replaces John Deere OEM number AL68724, Dimension A: 26.25", Dimension B: 1.250", Notched end, (Item #: 108720) $237.00

Tie Rod End - Right Hand - For John Deere tractor models 2140, 2750 (All with APL345 Front Axle), 3040, 3050, 3140 (All with APL345 Front Axle), 3150, 3350 (All European Model), Replaces John Deere OEM number AL56440, Fits Right Hand Side, (Item #: 104841) $141.98

Tie Rod End Left Side - Used on John Deere 3050 and 3350 with mechanical four wheel drive and heavy duty ZF APL Axle, this tie rod end is 11.750 inches long with M24 x 1.5 right hand thread. (Item #: 104843, Ref: AL69816) $194.00

Tie Rod End. Left Side - This Tie Rod End is 11.750 Inches long from the center of the post to the end of the tube. It has M24 X 1.5 Right Hand Thread. It is used on (2140, 2750 Axle Serial number 024906 and up), (2950, 3040, 3140 Axle Serial Number 026317 and up), 3050, 3350. Replaces AL58013, AL168705 (Item #: 104856, Ref: AL58013) $86.92

Tie Rod End. Right Side - This Tie Rod End is 11.750 Inches long from the center of the post to the end of the tube. It has M24 X 1.5 Right Hand Thread. It is used on (2140, 2750 Axle Serial number 024906 and up), (2950, 3040, 3140 Axle Serial Number 026317 and up), 3050, 3350. Replaces (Item #: 104857, Ref: AL58014) $95.08

Tie Rod, Left Side - This Tie Rod Is 10.750 inches overall and has - M28 X 1.5 Right Hand Threads. It fits the following tractors with MFWD 2955, 3050, 3055, 3150, 3155, 3255, 3350, 3640, 3650, (3040, 3140 ALL WITH MFWD Serial Number 430000 and up) Replaces AL168701, AL68254 (Item #: 104850, Ref: AL68254) $42.30

Tie Rod, RH Thread, 4WD - This Tie Rod is 8.250 inches long. It has - M22 X 1.5 R/H Threads on one side and - M24 X 1.5 R/H Threads on the other. It is used on John Deere 2140, 2750, 2950, 3040, 3050, 3140, 3350, 210C, 300D, 310C, 310D, 315C, 315D, 410C, 410D, 482C, 510C, 510D, 610C. It Replaces AL60161, AL39316, AL178074, AL55011 (Item #: 104855, Ref: N14377) $56.00

Tie Rod, Right Side - This This Tie Rod Is 10.750 inches overall and has - M28 X 1.5 Right Hand Threads. It fits the following tractors with MFWD 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650 (Item #: 104851, Ref: AL68255) $65.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.30

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 3050 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy