FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 420 Parts

Category: Steering

[Categories] [All 420 Parts] [All John Deere Models]

No
Picture
Axle Shaft Bearing - For John Deere tractor models M (s/n 44475 - later), MC (s/n 13907 - later), MT (s/n 27913 - later), 40, 320, 330, 420, 430, 435, 440, 1010, 1020, 2010, 2030 (s/n 187300 - earlier), Compatible with John Deere Combine (s) 45 (s/n 3500 - earlier), Compatible with John Deere Harvester (s) 9900, 9910, Compatible with John Deere Construction and industrial models 300, 301, 310 (s/n 192065 - earlier), 350, 350B, 380 (s/n 192065 - earlier), 400, 401, 410 (s/n 192065 - earlier), 440, 440 (s/n 17057 - earlier), 440A, 440A (s/n 17057 - earlier), 440B, 440B (s/n 17057 - earlier), 450, 480, 480A (s/n 193099 - earlier), 480B (s/n 193099 - earlier), 540, 540A, 540B, 540D, 548D, 640, 640D, 648D, Replaces John Deere OEM number JD8511, AL28037, Replaces Bearing number 7109, (Item #: 173783) $18.10

Drag Link - Right hand threaded end, A= 3.12, B= .687. For tractor models M, 40, 320, 330, 420, 430, 435, 1010 (Also subs for AM498T). (Item #: 104785, Ref: AM496T) $19.90

Front Support Pivot Shaft - For MT, (40, 420, 430 all row crop). Front Support Pivot Shaft. (Item #: 172643, Ref: M4156T) $110.48

No
Picture
Needle Bearing - For John Deere tractor models 40 (Standard Axle, s/n: 69404-later), 320 (Standard Axles), 330 (Standard Axles), 420 (Standard Axles), 430 (Standard Axles), 1010 (Single Row Crop, s/n: 010001-042000), Replaces John Deere OEM number JD8820, (Item #: 176562) $28.50

Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Item #: 113923, Ref: T21539) $11.60

Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2282T (Item #: 115287, Ref: M2282T) $4.70

Spindle Thrust Bearing - This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Item #: 104207, Ref: JD8407) $10.30

Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2283T (Item #: 115286, Ref: M2283T) $2.62

Steering Clutch Disc, Fiber - Disc is 8.554 inches O.D. 26 Internal Teeth. (Item #: 112073, Ref: M3293T) $28.10

Steering Clutch Disc, Steel - Disc is 9.268 inches O.D., 6.380 inches I.D. 6 External Ears. (Item #: 127279, Ref: M872T) $26.70

Steering Clutch Pressure Plate - 8.5", 3 lever. For tractor models 1010, 40C, 420, 420 Crawler, 430 Crawler, 440, 440D, MC. Replaces AT11853, AM1930T, AT11486, AM987T, AP23494. (Item #: 173463, Ref: AT16121) $262.00

Steering Pin - For John Deere tractor models M, 40, 320, 330, 420, 430, 435, 450, 1010, Replaces John Deere OEM number AM1514T, AM1515T, Length 1", 405 Pin Diameter, 590 Diameter Stop Ring, 307 Height of Taper, Taper .358-.475, (Item #: 126708) $28.60

Steering Tube - For John Deere tractor models M, MT, 40, 420, 430, 435, Replaces John Deere OEM number AM1830T, AM2589T, AM2595T, AM3936T, AM3948T, AM438T, AT10263T, AT10768, AT10768T, AT10969T, T10677T, T11977T, (Item #: 126715) $83.00

Steering Wheel - 18" diameter, 11/16"-3/4" keyed, stepped hub, 3 steel spokes. For tractor models (320 SN# 325000 and up), 330, (420 SN# 125000 and up), 430, 435. not in stock 28feb07 jeff (Item #: 101443, Ref: AM3914T) $60.00

Steering Wheel - 3 Spoke (covered). 18 inches in diameter. 11/16-3/4 shaft, keyed hub. Tractors 320 (SN# 325000 and up), 330, 420 (SN# 125000 and up with slant steering), 430, 435, 440. (Item #: 101443, Ref: TP-AM3914T) $60.00

Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227) $55.00

Steering Wheel Cap - For tractor models 320, 330, (420 with slant steering to SN# 139999), 430, 435, (520 from SN# 5208100 with power steering), (530, 630, 730 with power steering), (830 2-cyl with power steering), (620 from SN# 6213100 with power steering), (720 from SN# 7214900 with power steering), (820 2-cyl from SN# 8203100 with power steering). Replaces AL155227, F3629R (Item #: 101452, Ref: R3859) $45.00

Steering Wheel Cap - For 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820, 830 without Power Steering. Replaces OEM3630, F3630R (Item #: 101451, Ref: R4266) $65.00

Steering Wheel Nut - For John Deere tractor models H, HWH, M, MC, MT, 40, 320 (s/n 325000-earlier), 420 (s/n 124999-earlier), Replaces John Deere OEM number 14H398, AL2315, 5/8" - 18 NF Thread, .550" Tall, (Item #: 126724) $4.00

Steering Wheel Shaft Bushing - For John Deere tractor models 40 (Two Row Utility s/n 60001-later), 40 (Standard s/n 69404-later), 40 (Special s/n 60001-later), 40 (Utility s/n 63120-later), 40 (Tricycle s/n 75499-later), 320 (s/n 325000-earlier), 420 (s/n 125000-earlier), Replaces John Deere OEM number M2757T, AM1830T, Length 0.989", Thickness 0.065", Hole Diameter 0.750", (Item #: 126726) $18.80

Tie Rod - A= 11.125", B= .608". For tractor models 1010, (320, 330, 40, 420, 430, M all with std front axle). Replaces AM2001T. (Item #: 104786, Ref: AM3951T) $76.00

Tie Rod - For John Deere tractor models 420 (Row Crop Utility), 430 (Row Crop Utility), Replaces John Deere OEM number AM2984T, Length: 11", Width: 0.608", (Item #: 160191) $94.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 420 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy