FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 350 Parts

[Categories] [All John Deere Models] [Print]

Clutch

No
Picture
Clutch Alignment Tool - Clutch Alignment Tool. 1-1/4" 10 spline, 1-3/4" 27 spline, .67 pilot. Verify dimensions to the hubs on your clutch. For tractor models 1010, 2010, 2840, 350, 400, 400G, 440, 440A, 440B, 440C, 480. (Item #: 179690, Ref: S.70925) $35.40

Pilot Bearing - I.D . .590", O.D. 1.375", Thickness .430". For tractor models 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Industrials: 300, 300B, 301, 302, 302A, 350, 350B, 401, 401B, 401C, 401D, 420, 430, 440, 440B, 450, 450C, 450D, 450E, 450G, 480A, 480B, 510, 540, 548B, 548D, 570, 640, 648D, 670. (Item #: 108447, Ref: AL10107) $1.90

Cooling System

Fan, 4 Blade - Fan is 16.00" diameter with 1-1/2" pilot hole, mounting holes on 1-3/4" centers. For tractor models 1020, 1520, 2040, 2240, 820, 830, JD300, JD350, JD350B. (Item #: 108498, Ref: AT23180) $53.00

$John Deere 350 Radiator Hose - Bulk 10ft x 1\2 inch$
Radiator Hose - Bulk 10ft x 1/2" - For John Deere tractor models 350, 420, 430, 450, 500, 1010, 2010, 2510, 2520, 3010, 3020 (s/n 122999-earlier), 4040, 4240, 4440, 4520, 4620, 5085M, 5100M, 5220, 5320, 5420, 5520, Compatible with John Deere Construction and industrial models 70, 210C, 290D, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 315D, 350A, 350B, 350C, 380, 400G, 401B, 401C, 410, 440, 440A, 440B, 450B, 450C, 450D, 455D, 480A, 480B, 482, 482C, 485E, 486E, 488E, 500A (s/n 123113-earlier), Compatible with John Deere Hay Cutting (s) 2320, 2420, 3430, 3830, 4890, 4895, Replaces John Deere OEM number R31543, T11171, TY22562, R32641, R33678, T12397, T12815, T438T, T592T, I.D. (A): 1/2", O.D.: 27/32", Length: 10', Fits Engines: 3164D, 4219DF, 4239D, 4239T, 4039, 4045, 4239D, 4239T, 4239A, 3179DF, 3179TF, 4045HLV68, 4045HLV70, For Hose Clamp use Item #: 130452, (Item #: 150857) $19.00

Thermostat Housing Bypass Hose - Measuring 0.50 inches inside diameter on both end, this Bypass Hose is used in many John Deere models. Verify size or OEM number T20277 before ordering. (Item #: 125600, Ref: T20277) $8.50

Water Pump - For tractor models JD350, JD350B, JD440, JD440A, JD440B, JD450, JD480A, JD480B, 210C, 310A, 310B, 400G, 401B, 401C, 401D, 410, 450C, 450D, 455D, 480C, 482C, 2510 Diesel, (2030, 2520, both with Gas). Replaces Casting #RT29521, R29521, R55164, T29521, AR65262, RE19717, AT26708, AT21204, AT29620, AT27019. Comes with gasket and pulley. (Item #: 107989, Ref: RE25043) $142.00

Water Pump Pulley, Bolt On - This Water Pump Pulley is for tractor models 820, 830, 1020, 1520, 2020, 2030, 2510, 2520, 210C, 290D, 300B, 301A, 302, 302A, 310A, 310B, 350, 350B, 350C, 350D, 400G, 401B, 401C, 401D, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 480C, 482C, JD380, JD401, JD480, JD480A, JD480B. Replaces T30721. Bolt on. (Item #: 150383, Ref: T23628) $90.00

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. (Item #: 164008, Ref: AR101549) $10.10

Water Pump, with out Cooler Tubes - For tractor models 2030 gas, 210C, 2510 diesel, 2520 gas, (310A, 310B, diesel), 400G, 401B, 401C diesel, 401D, 410 diesel, 450C, 450D, 455D, 480C diesel, 482C, 350, (350B, 440, 440A, 440B all diesel), 450, 450B, 480A, 480B. (Item #: 173137, Ref: R29521) $205.00

Drive Train

Gear Shift Lever Washer And Snap Ring Kit - Retains the gear shift lever into the housing. Measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. L, LA, LI, M, MC, MI, MT, MTN, MTW, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 210C, 2120, 2130, 2135, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855, 2940, 2941, 2950, 2951, 2955, 300B, 300D, 301A, 302A, 3030, 3040, 3050, 310A, 310B, 310C, 310D, 3120, 3130, 3135, 3140, 3141, 3150, 315C, 315CH, 315D, 320, 330, 3340, 3350, 3351, 350B, 350C, 350D, 355D, 3641, 3651, 40, 401B, 401C, 401D, 410B, 410C, 410D, 415B, 420, 430, 435, 440, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, [820 3 cylinder, 830 3 cylinder, 840 (3 cylinder)], 920, 930, 940, 940V, Industrial: 300, 301, 302, 310, 350, 380, 400, 401, 410, 480. Replaces: L4027, L4035. (Item #: 129237, Ref: 70202875) $15.50

Electrical System

Alternator - New Motorola type alternator. It is 12-volt, 51 Amp. Note, the orange wire is for dash light and the purple wire is for keyed ignition. The large stud connection is battery positive. Replaces AR40420, AR47937, AT21229, AR38458, TY26016, TY1427, TY26016, TY26017, Dixie-924, RA12NJD604, RA12N55JD6, RA12N55JD7, RA12N600D, SE501357, TY1430, 10A31126, 110-157, 110157, 11039, 1400-0568, 36-7365, 49130, 7365, 8AR2006, 8AR2015K, 90-05-9077, AMO0071 (Item #: 117621, Ref: SE501356) $164.00

Distributor Cap - This new Distributor cap is for 3 cylinder models with Prestolite Distributor #'s - IBT-4301B, IBT-4301C and IBT-4301D. Replaces AT21717 and 21A447. (Item #: 108147, Ref: AT21717) $26.40

Electronic Ignition Conversion Kit, 12 volt negative ground - Use on the following tractors: 1020 and 1520 with 3-cylinder engine sizes 135, 152, 164 using Prestolite distributor # IBT4301B, IBT4301C, IBT4301D. Also used on industrial 300, 300B, 301, 301A, 302, 302A, 310, 350, 350B, 380. Electronic ignition conversion kit by Pertronix. Replaces points and condenser with an electronic module. Used Only on tractors with 12 volt NEGATIVE ground systems. (Item #: 105087, Ref: 1531) $200.00

Starter - This is a brand new Delco 10MT type starter. For Gas Applications. It is 12 volt, 10 teeth with clockwise rotation, and has a 2 hole mount. It fits multiple John Deere Tractor and Combine models; 1020, 135 Eng, 1520, 2020, 2510, 2520, 300 Indust/Const, 301 Indust/Const, 301A Indust/Const, 302 Indust/Const, 310 Indust/Const, 310A Indust/Const, 310B Indust/Const, 329G Eng, 3300 Combine, 350 Crawler, 350B Crawler, 350C Crawler, 380 Forklift, 40 Combine, 400 Indust/Const, 401 Indust/Const, 401A Indust/Const, 401B Indust/Const, 401C Indust/Const, 401D Indust/Const, 410 Indust/Const, 45 Combine, 450B Crawler, 480 Forklift, 480A Forklift, 480B Forklift, 480C Forklift, 499 Cotton Picker, 55 Combine, 600 Indust/Const, 600 Sprayer, 600A Sprayer, 6600 Combine, 700, 880 Windrower, 95 Combine. Replaces TS-1172, AM1108319, AR91813, AT18025, SE501435, SE501436, S14211, S14326, TY1465, TY26035, TY6639, TY6706, 10461600, 1107339, 1108319, 1109421, 1109576, 12301485, 1400-0172, 14000172, 323-652, 323652 (Item #: 160375, Ref: TY26037) $188.00

Starter - This is a 12 volt, Delco style starter OSGR with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Item #: 113951, Ref: RE239087) $160.00

Engine Bearings

No
Picture
Rod Bearing, .010, Gas - SINGLE rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 2520 SN# 157354>, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODEL, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G (Item #: 106752, Ref: AT21117) $19.00

Rod Bearing, .020, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Item #: 106753, Ref: AT21119) $18.70

Rod Bearing, .030, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Item #: 106754, Ref: AT10519) $37.70

Rod Bearing, STD, Gas - SINGLE (STD size) rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 GAS with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G, JD544 EARLY, JD544 LATE (Item #: 106751, Ref: AT10123) $17.40

Engine Gaskets

Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516. (Item #: 176661, Ref: R97351) $11.10

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 1032, 1042, 1052, 1055, 1065, 1068H, 1020, 3300, 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, 710D, 350, 350B, 350C, 350D, 350D, 355D, 355D, 400G, 450, 450B. Replaces: AR67942, AT21608 (Item #: 106849, Ref: AT21608) $7.40

No
Picture
Upper Gasket Set - For tractor models (1020 gas), 300, 350. (Item #: 106875, Ref: HGS135) $108.00

Engine Rebuild Kits

No
Picture
Engine Major Overhaul Kit, 135 CID Gas - This engine overhaul kit is for 1020 Gas with SN<162078, 300 Crawler and 350 Wheel Tractor, all early models, all with 135 CID, 3 cylinder, 3.86" bore, 3 ring pistons. VERIFY YOUR SLEEVE SEAL O-RING GROOVES ARE IN THE LINER. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Item #: 173370, Ref: OK245) $1559.01

No
Picture
Engine Major Overhaul Kit, 135 CID Gas - This engine kit for 1020 Gas with SN# 162079>, 300 Crawler and 350 Wheel Tractor, all late models, all with 135 CID, 3 cylinder, 3.86" bore, 3 ring pistons. VERIFY YOUR SLEEVE SEAL O-RING GROOVES ARE IN THE BLOCK. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Item #: 173369, Ref: OK246) $1549.01

Engine Parts

Steering Clutch Disc - For John Deere Construction and industrial models 350, 350B, 350C (s/n 752882-earlier), 350D, 355D, 400G, Replaces John Deere OEM number T21315, (Item #: 127159) $21.10

Steering Clutch Disc - For John Deere Construction and industrial models 340D, 350, 350B, 350C, 350D, 355, 355D, 440D, 448D, 540D, 548, 640D, 648D, Replaces John Deere OEM number T44128, AT117553, 8.958" O.D., 30 Tooth, Fiber, (Item #: 151113) $25.60

Valve, Intake - Used on John Deere 152, 164, 179 - 3 cylinder, 202, 219, 239, 276 4 cylinder, and 329. 359 6 cylinder diesel engines. 1.772 inch Head O.D., 0.371 inch Shaft O.D., 5.168 inch Overall Length. Replaces John Deere R79623, R52251 (Item #: 128629, Ref: R79623) $7.40

Engine Pistons and Sleeves

No
Picture
Sleeve and Piston Kit - For one hole. Fits Models: (1020 gas with SN# up to 162078), (2020 SN# up to 159926), (2510 gas with block # T23405, T24960, T26932), (300, 350, 400, 450, 480 early models). Reference SK404 (Item #: 189185, Ref: SK404) $201.00

Fuel System / Air Intake

Carburetor - New carburetor with reversible linkage. For M, MC, MT (VD Engine serial number 1000up), 40, 77 Crawler, 300 (135G), 320, 330, 350 Crawler, 1020, 2010, 2020, 2500, 2510, Combines 45 (HA145, HA165D, 145GH, 180G4H Engine), 55 (HA217 gas), 95 (303G5H, 303G6H), 8x6 and 99 Cotton Pickers, NA217, 135 G Sprayer. Replaces Marvel -Schebler numbers TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX959. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 100752, Ref: 14996) $475.00

Carburetor - This New Zenith Style Carburetor with reversible linkage. Replaces TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX945, TSX945SL, TSX959, TSXU963, TSXU9631. John Deere Part Numbers AM1613T, AM1794T, AM2067T, AM3061T, AM3227T, AM3611T, AM3611T, AM3612T, AM3612T, AM366T, AM771T, AR62244, AR67706, AT10181, AT10428, AT10576, AT11158, AT11637, AT11680, AT12357, AT13064, AT14028, AT14047, AT14095, AT14387, AT17374, AT17629, AT18036, AT18098, AT18110, AT21142, AT21183, AT21184, AT21185, AT21358, AT21411, AT21786, AT21848, AT22994, AT22997, AT23000, AT23013, AT23016, AT23132, AT23136, AT23264, AT26120, AT27783, AT359T, AT420T, AT453T, RE19402. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 183805, Ref: 14996B) $300.00

Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on John Deere (820 3 cylinder), 920, 1020, 1120, 1520, 300, 300B, 301, 301A, 302, 302A, 310B, 350, 350B, 380, (2020, 2120 Europe), 3120. Replaces original part number R56434 (Item #: 112513, Ref: 1039071M1) $5.20

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

Fuel Lift Transfer Pump - Also replaces AR52159, RE42211. For tractor models 290D, 300, 300A, 300B, 300D, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 34, 3420, 344E, 344G, 350, 2155, RE27667 (Item #: 112524, Ref: TP-RE42211B) $26.50

Gauges

No
Picture
Temperature Gauge - For John Deere Construction and industrial models 340D, 350, 350B, 350C, 350D, 355D, 380, 410B, 415B, 440C, 440D, 444, 444C, 444CH, 444D, 448D, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 510B, 515B, 540B, 540D, 540E, 544, 544A, 544B, 544C, 544D, 548D, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570, 570A, 610, 610B, 640, 640D, 640E, 643, 643D, 644, 644A, 644B, 644C, 644D, 646, 648D, 690B, 693B, 710B, 740, 740A, 740E, 740G, 743, 743A, Replaces John Deere OEM number AT104755, (Item #: 176352) $112.00

Hydraulic System

Hydraulic Pump - For John Deere Construction and industrial models 350, 350B, 350C, 350D, 355D, 450, 450B, 450C, 450D, Replaces John Deere OEM number AT436900, AT38801, (Item #: 170203) $943.72

No
Picture
Hydraulic Seal Kit - Arm Cylinder - For John Deere Construction and industrial models 330, 350, 370, Replaces John Deere OEM number 4640118, Rod: 115 MM, Bore: 170 MM, (Item #: 153201) $243.00

Hydraulic Seal Kit - Backhoe Crowd Cylinder - For John Deere Construction and industrial models 300, 302, 350, 355, 400, 401, 444, 450, 455, 544, 550, Replaces John Deere OEM number RE18755, Rod: 1-3/4", Bore: 3-1/2", (Item #: 152974) $71.00

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 310, 350, 410, 450, 500, 544, 550, 555, 640, 644, 646, 655, 693, 740, 743, 760, Replaces John Deere OEM number AR105355, (Item #: 152895) $80.00

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 300, 302, 350, 355, 400, 401, 444, 450, 455, 544, 550, Replaces John Deere OEM number RE18732, Rod: 2", Bore: 4", (Item #: 153347) $92.00

Hydraulic Seal Kit - Boom Lift Cylinder - For John Deere Construction and industrial models 350, 400, 401, 440, 450, 500, 544, 644, Replaces John Deere OEM number RE10640, Rod: 2-1/4", Bore: 4-1/2", (Item #: 152946) $66.00

No
Picture
Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 350, 350B, 350C, 355D, Replaces John Deere OEM number RE19222, (Item #: 152986) $35.60

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 310, 310A, 310B, 350, 350B, 350C, 350D, 355D, 400, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 455E, 500A, 500C, 544, 544B, 550, 550A, 550B, 555, 555A, 555B, 644, Replaces John Deere OEM number RE18757, (Item #: 153011) $84.00

No
Picture
Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 160, 350, Replaces John Deere OEM number AH155040, Rod: 75 MM, Bore: 105 MM, (Item #: 153132) $98.00

No
Picture
Hydraulic Seal Kit - Lift Angle Cylinder - For John Deere Construction and industrial models 350, 350B, 350C, 350D, 570, 570A, 570B, Replaces John Deere OEM number AR105454, (Item #: 152897) $53.00

No
Picture
Hydraulic Seal Kit - Lift Cylinder - For John Deere Construction and industrial models 350, 350B, 350C, 355D, 510, 844, Replaces John Deere OEM number AR105381, Rod: 2", Bore: 3-3/4", (Item #: 153086) $43.20

$John Deere 350 Hydraulic Seal Kit - Lift\Angle Cylinder$
Hydraulic Seal Kit - Lift/Angle Cylinder - For John Deere Construction and industrial model 350, Replaces John Deere OEM number AR99795, (Item #: 152907) $48.40

Hydraulic Seal Kit - Loader Bucket Cylinder - For John Deere Construction and industrial models 300, 300B, 350 (s/n 59100-later), 350B (s/n 59100-later), 350C, 400, 401A, 401D, 570, 570B, 760A, 762, 762A, 762B, Replaces John Deere OEM number RE19217, Rod: 1-1/2", Bore: 2-1/2", (Item #: 152933) $29.30

Hydraulic Seal Kit - Stabilizer Cylinder - For John Deere Construction and industrial models 300, 302, 310, 350, 400, 401, 410, 440, 444, 450, 455, 500, 544, 550, 555, 644, 670, 770, Replaces John Deere OEM number RE18754, Rod: 1-3/4", Bore: 3-1/2", (Item #: 152932) $61.00

Hydraulic Seal Kit - Stabilizer Cylinder - For John Deere Construction and industrial models 300, 310, 350, 355, 400, 410, 440, 440C, 444, 444D, 450, 500, 540, 544, 646, Replaces John Deere OEM number AR105387, (Item #: 152999) $57.00

Hydraulic Seal Kit - Swing Cylinder - For John Deere Construction and industrial models 300, 302, 350, 355, 401, 444, 444C, 450, 455, 544, 550, Replaces John Deere OEM number RE18756, Rod: 1-3/4", Bore: 3-1/2", (Item #: 152918) $31.40

No
Picture
Hydraulic Seal Kit - Swing Cylinder - For John Deere Construction and industrial models 300, 350, 400, 450, Replaces John Deere OEM number AR105393, Rod: 2", Bore: 4", (Item #: 153142) $57.00

Hydraulic Seal Kit - Tilt Cylinder - For John Deere Construction and industrial models 350, 480, 500, Replaces John Deere OEM number AR105430, Rod: 1-1/2", Bore: 2-3/4", (Item #: 153145) $29.90

Hydraulic Seal Kit - Tilt Cylinder - For John Deere Construction and industrial models 300, 350, 400, 401, 450, 455, 550, 555, 570, 743, Replaces John Deere OEM number AR105453, (Item #: 153146) $66.00

Hydraulic Seal Kit - Track Adjuster Cylinder - For John Deere Construction and industrial models 350, 400, 440, 450, 455, 550, 555, 1010, 2010, Replaces John Deere OEM number 905000, Rod: 2-3/8", Bore: 2-3/8", (Item #: 153686) $18.10

No
Picture
Tilt Cylinder Packing Kit - For John Deere Construction and industrial models 350, 350B, 350C, 350D, Replaces John Deere OEM number AR99792, (Item #: 153277) $68.00

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116) $14.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $10.10

Miscellaneous

Seal - For John Deere Construction and industrial models 350, 400, 450, 455, 550, 555, 605, 650, Replaces John Deere OEM number AT124100, (Item #: 154287) $7.65

Seal - Hydraulic Track Tension Adjuster - For John Deere Construction and industrial models 350, 350B, 350C, 350D, 400G, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 550, 550A, 550B, 550G, 555A, 555B, 555G, Replaces John Deere OEM number T37660, (Item #: 154284) $7.30

Oil System

Oil Pump Drive Gear, Used - For John Deere tractor models 301, 350, 450, 820, 830, 920, 1020 (s/n 248000-earlier), 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2950, 2955 (s/n 767516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040S, 4050, 4240S, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 7200, 7400, 7500, 7600, Compatible with John Deere Combine(s) 925, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 1032, 1042, 1052, 1055, 1065, 1068, 1072, 1075, 1085 (s/n 689245-later), 1133, 1144, 1155, 1157, 1158, 1166, 1169, 1174, 1174H4, 1177, 3300, 4400, 4420, 4425, 4435, 6600, 9400, Compatible with John Deere Skid Steer Loader(s) 24, 240, 250, 260, 8875, Compatible with John Deere Harvester(s) 484, 7440, 7445, 7450, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70, 70D, 190E, 210C, 290D, 300B, 300D, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 340D, 344E, 344G, 350B, 350C, 350D, 355D, 380, 400G, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 444E, 444G, 448D, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 482C, 490, 490E, 493, 495, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540D, 540E, 540G (s/n 701059-earlier), 544, 544A, 544B, 544D, 544E, 544G, 548D, 548E, 548G (s/n 701059-earlier), 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570, 570A, 570B, 590D, 595, 595D, 610C, 624E, 624G, 640, 640D, 640E, 640G (s/n 701059-later), 643, 643D, 648D, 648E, 648G (s/n 701059-later), 650G, 653E, 655, 655B, 670, 670A, 670B, 672A, 672B, 690D, 690DR, 690ELC, 693D, 710B, 710C, 710D, 740E, 748E, 750, 750B, 750C (s/n 715797-earlier), 755, 755A, 755B, 790ELC, 4400, 4500, Compatible with John Deere Engine(s) 135, 152, 180, 202, 219, 3029, 4039, 4045, 4045 (s/n 100000-499999), 4219, 4239D, 4239T, 4276, 6059 (s/n 100000-499999), 6068 (s/n 100000-499999), 6329D, 6359, 6359D, 6359T, 6414D, 6414T, Compatible with John Deere Hay Cutting(s) 2270, 2280, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20298, Teeth: 33, For a new version of this item use Item #: 121172, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411172) $141.60

PTO / Driveline

PTO Seal Shield - This PTO Seal Shield is used on many Massey models with single speed PTO, including; (165UK Engine Serial number 144682 and up), (230 Rear Axle Serial Number FD101, CD8020 and up), 231, 231S, (235 Transmission Serial Number FD101 and up), 240 up to Engine Serial Number P38370), 245, 250, (253 up to Engine Serial P38370), (255 Wet Brakes), 282, 283, )283 Brazil up to Serial Number 2915), 290, (360, 375, 383, 390, 390T up to Engine Serial Number P38370), 670, 690, 698, 699, (20 Rear Axle Serial Number FD101, CD8028 and up), 20C, 20D, 20E, (20F up to Serial Number 5101D0782), (30 Wet Brakes), 30B, 30D, 30E, (31 Rear Axle Serial Number FD101, CD8020 and up), (40 Wet Brakes), 40B, 40E, 50C, 50D, 50E. Replaces 533183M1. Verify Part Number before ordering. (Item #: 179732, Ref: 533183M1) $4.00

Seats

Cushion, Arm Rest, Black - Fits Industrial/Construction: 350, 450, 450B, 450C, 550. (Item #: 182148, Ref: AT10140-1) $94.00

Cushion, Back, Black - Fits Industrial/Construction: 350, 450, 450B, 450C, 550. (Item #: 172610, Ref: AT10138-1) $106.00

Sheet Metal / Body Parts

No
Picture
Guard - For tractor models 1207, 1209, 1214, 1380, 350, 450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 163427, Ref: TP-E62000) $11.70

Wheels

Wheel Center, 8 Bolts, Used - For John Deere tractor models 301, 320, 330, 350, 420, 430, 435, 440, 450, 455, 480, 1010, 1020, 1050, 1070, 1250, 1450, 1520, 1650, 2020, 2030, 4044M, 4044R, 4049M, 4049R, 4052M, 4052R, 4066M, 4066R, 4120, 4320, 4500, 4520, 4600, 4610, 4700, 4710, 4720, 5105, 5200, 5205, 5210, 5220 (s/n 420000-earlier), 5300, 5310, 5310N, 5320 (s/n 420000-earlier), 5320N, 5400, 5400N, 5410, 5415, 5420 (s/n 420000-earlier), 5420N, 5425N, 5500N, 5510, 5510N, 5520 (s/n 420000-earlier), 5520N, 5725 (N), Compatible with John Deere Construction and industrial models 301A, 302, 401B, Replaces John Deere OEM nos T19065, Bolts: 8, Pilot Hole: 6", Diameter: 25.5", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433044) $176.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.80

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.70

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $40.00

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $40.00

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.60

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere 350 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$John Deere 350 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

$John Deere 350 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 350 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$John Deere 350 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 350 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 350 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$John Deere 350 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $35.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.90

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $385.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $278.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.10

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $60.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $7.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15