FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 165 Parts

Category: Hitch / Drawbar

[Categories] [All MF165 Parts] [All Massey Ferguson Models]

Beam, Center Link - For tractor models 135, 165, 175, 180, 235, 240 serial number 522354-A20286, 245, 250, 255, 265, 298, 362, 375, 390, 398, 399. Replaces 1863393M92, 3811673M92 (Item #: 172729, Ref: 1863393M92) $118.00

Center Link Bracket Pin - For Massey Ferguson tractor models 135, 165, 175, 180, 235, 245, 255, 265, 275, Compatible with Massey Ferguson Construction and industrial models 30, 40, Replaces Massey Ferguson OEM number 523947M1, (Item #: 163479) $52.04

No
Picture
Check Chain Bracket - For Massey Ferguson tractor models 65, 135, 150, 165, 175, 235, 240, 245, 255, 265 (s/n 9A349239-earlier), 275 (s/n 9A349239-earlier), Replaces Massey Ferguson OEM number 184368M1, (Item #: 173677) $12.50

No
Picture
Check Chain Clevis Pin - For Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 175, 240, 1080, 1155, Replaces Massey Ferguson OEM number 195396M1, Diameter: .500", Length: 1.250", (Item #: 173711) $3.00

Clevis Assembly - Clevis Assembly with pin, for SDA75. This has a mounting hole spacing of 3 1/2 inches center-to-center. For tractor models MF135, MF150, MF165, MF35, MF50, MF65. (Item #: 178499, Ref: SDA2-75) $179.00

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

Draft Control Lever Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 173059, Ref: 1660324M91) $39.00

Drawbar - Used on 135, 135 UK, 150, 165 UK, 165, 175 UK, 175, 178, 35 UK, 35, 35X, 50, 65 UK, 65, 765. Will also work on 235, 240, 245, 250, 202, 203, 204, 205 but is not exactly like the original. Replaces 872149M1, 189344M1, 0011091U91, 1690718M1 (Item #: 184798, Ref: 872149M1) $149.62

Drawbar - Drawbar for 35, 50, 65, 235, 240, 150, 165, 175, 180. 28 inches long, 1.25 inches thick, 2 inches wide, 25.5 inches center-to-center on holes. (Item #: 165137, Ref: VPL4434) $66.00

No
Picture
Drawbar Pin - For Massey Ferguson tractor models TEA20, 35, 35X (FE), 65, 135, 165, 175, Replaces Massey Ferguson OEM number 824393M1, Replaces manufacturer number VPL4413, Used with drawbar 872149M1, (Item #: 174469) $11.54

Drawbar Pin, Front - For Massey Ferguson tractor models 135 (UK), 165 (UK), 175 (UK), 178 (UK), 231, 240 (s/n N01001-A20286), 250, 253, 261, 263, 270, 275 (UK), 283, 290 (UK), 290, 365 (s/n B18009-earlier), 375 (s/n B18008-earlier, s/n B18009-later), 383, 390 (s/n B18008-earlier, s/n B18009-later), 390T (s/n B18008-earlier, s/n B18009-later), 393, 396, 398 (s/n B18008-earlier, s/n B18009-later), 399 (With 1006.6 engine), 670, 690, 4243, 4253, 4325, 4335, Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 20F, 30E, 40E, 50E, Replaces Massey Ferguson OEM number 886166M1, (Item #: 170267) $15.70

Drawbar, Straight - For tractor models TO35, 135, 150, 165, 20, 30, 3165, 35, 50, 65. This drawbar is 35 3/4 inches OVERALL LENGTH, 2 inches WIDE, 1 1/8 inches THICK. (Item #: 160846, Ref: 184611M1) $59.00

Drawbar, Swinging - Swinging Drawbar is 35.75 inches in length, 2 inches wide, 1.125 inches thick. Also replaces 184611M1. Three 1.032 inch diameter holes at 1.25, 3.25, and 3.25 inches from front. For models:130, 135, 150, 165, 202, 205, 20C, 235, 245, 255, 265, 275, 30B, 35, 40B, 50, 65, TO35. (Item #: 110371, Ref: 531468M1) $85.00

Fork - Fork, leveling box, extra heavy-duty, for 1 inch shaft. 1 inch threads 17 5/16 inches long and 7/8 inch fork spread. Used with extra heavy-duty leveling box 8907649EX-HD on tractors: MF65, MF165, MF175, MF265. Fork can also be used on tractors: MF185, MF275, MF283, MF285, MF375, MF383. For MF165, MF175, MF185, MF265, MF275, MF283, MF285, MF375, MF383, MF65. (Item #: 172795, Ref: 1861392M3) $42.08

Fork - Fork, leveling box, heavy-duty, for 1 inch shaft. Use with heavy-duty leveling box 897649M95. For tractor models MF65, MF165, MF175, MF265. (Item #: 117372, Ref: 893405M3) $25.00

Heavy Duty Leveling Box Assembly, Right Hand - For tractor models 65, 165, 175, 265. Heavy Duty Leveling Box Assembly, RH. Has 1 inch shaft and pinion 14 3/4 inch Long, includes fork. Adjusts form Adjustment is 20 1/2 inches to 26 1/2 inches center to center on pin hole. (Item #: 110256, Ref: 897649M95) $77.00

No
Picture
Heavy Duty Leveling Box Knuckle - For Massey Ferguson tractor models 65, 165 (UK), 175 (UK), 175, 180, 185, 235 (UK), 240, 245, 250, 255, 265, 270 (UK), 271, 275 (UK), 275, 281, 283 (UK), 283, 285, 290 (UK), 298 (UK), 350 (UK), 360, 362, 375, 383 (UK), 383, 390, 390T, 393, 398, 399, 461, 543, 670, 690, 698, 699, 1080, 1085, 3050, 3060, 3065, 3070, 3075, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 30, 30E, 31, 40E, 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 897653M2, 893560M1, 897653M1, 897653V2, (Item #: 176231) $14.80

No
Picture
Hydraulic Lift Shaft Bushing - For Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 393, 398, 399, 670, 680, 698, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40E, 50C, 50D, 50E, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 1870934M1, Dimensions: 2-3/16" x 2-3/8" x 2-55/64", With oil spot, (Item #: 173699) $12.70

No
Picture
Left Hand Stabilizer Bracket - For Massey Ferguson tractor models 135, 165, 175, 180, 255, 265, 275, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 30, 31, 40, 3165, Replaces Massey Ferguson OEM number 49B58, Fits Massey Ferguson tractor models 145, All with out roll bar and with square axle, 7/8" Stabilizer Pin Hole, For Right and Bracket use Item #: 174074, (Item #: 174073) $59.00

Level Rod Yoke - Left hand rod and yoke assembly, 3/4 inch thread, 4-1/8 inch thread length, 14-7/8 inches long. For tractors: MF65, MF165, MF235 Orchard, MF245 Orchard, MF265, MF275 Low-Profile with 16 inch rims. (Item #: 184782, Ref: 897683M92) $59.00

Leveling Box Assembly - With Hand Crank adjusts from 20.5 inches to 26 inches. For tractor models 65, 175, 180, 205, 230, 240, 245, 250, 253, 255, 270, 283, 290, 298, 302, 304, 360, 362, 390, 390T, 393, 399, 670, 690, 3090, 3120, 3140, 3165, 30E, 40E, 50E. Replaces 893569M92, 1884760M92, 1884760M94. (Item #: 110256, Ref: 1884760M92) $77.00

Leveling Box Assembly - Adjusting from 20 inches center to center to 25 inches center to center, this leveling box assembly replaces OEM numbers 193502M91, 195644M1, 3580777M93, 184347M92, 193501M91, 184347M93, 184346M93, 897679M91, 897679M92 (Item #: 110402, Ref: 184347M92) $70.00

Leveling Box Assembly - Adjusting from 21 inches to 25 inches center to center on the pin holes, this right hand leveling box assembly replaces Massey Ferguson part numbers: 1887372M91, 893570M92, 897649M9, 897649M95 (Item #: 110256, Ref: 1887372M91) $77.00

No
Picture
Leveling Box Assembly Without Fork, Right Hand - For Massey Ferguson tractor models 35X, 135, 150, 165, 175, 230, 240, 245, 255, 265, 275, 285, 360, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 30, 202, 203, 204, 205, 302, 304, 2135, 2200, Replaces Massey Ferguson OEM number 193178M91, Right Hand, Thread: 3/4" - 10 Right Hand, (Item #: 172530) $74.00

Leveling Box Assembly, Right Hand - For 50, 65, 135, 150, 165. Leveling Box Assembly, right hand. For Hi-Clearance tractors. Adjusts 23 inches to 27 inches center hole to center hole. Includes 14 5/8 inch shaft and pinion 897681M1 and fork 184358M1. (Item #: 179006, Ref: HLBMF62) $107.00

Leveling Box Assembly, Right Hand - For tractor models 50, 65, 150, 165. Leveling Box Assembly, RH. For Lo-Clearance tractors. Includes 12 9/32 inch by 3/4 inch shaft and pinion 897680M1 and fork 184358M1. Adjustable 21 to 25 inches.Clevis holes 5/8 inch dia. (Item #: 112522, Ref: HLBMF63) $73.00

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Item #: 182821, Ref: 193181M1) $20.98

No
Picture
Leveling Box Knuckle Pin - For Massey Ferguson tractor models 35X (FE), 135, 150, 165, 175, 230, 231, 240, 245, 250 (UK), 255, 265, 275, 285, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D (UK), 20F (UK), 30, 30B (UK), 30D (UK), 30E (UK), 40B (UK), 40E (UK), 202, 203, 204, 205, 302, 304, 2135, 2200, Replaces Massey Ferguson OEM number 376399X1, Overall Length: 3.59", Diameter: .618", (Item #: 173854) $3.00

No
Picture
Lift Arm Ball - Cat 1 - For Massey Ferguson tractor models 135, 165, 231, 235, 240, 250, 253, 261, 360, 362, 390, Replaces Massey Ferguson OEM number 886428M1, (Item #: 165858) $6.60

Lift Arm End, LH - Lift arm end, category I, left hand, 7/8 inch pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Item #: 150266, Ref: 184464M92_) $52.00

Lift Arm End, RH - Lift arm end, category I, right hand, 7/8 inch pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Item #: 150265, Ref: 184463M92) $49.60

No
Picture
Lift Link Yoke Clevis Pin - For Massey Ferguson tractor models 65, 135, 165, 168, 175, 178, 180, 185, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 394, 399, 451, 461, 471, 481, 491, 492, 543, 575, 583, 590, 596, 670, 675, 690, 698, 699, 1080, 1085, 3050, 3060, 3070, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 20F, 30, 30E (UK), 31, 40, 40B, 40E, 40E (UK), 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 3582662M1, 893567M1, Fits Massey Ferguson tractor models 299, 765, (Item #: 174723) $8.90

Lower Lift Arm Attaching Shaft - Replacing Massey Ferguson part numbers 184356M1, 893419M1, this shaft comes with hardware. It is 3/4 UNF thread on both sides. Used on Massey Ferguson 1080, 133, 135, 140, 145, 150, 152, 155, 165, 175, 178, 180, 30, 31, 40, 50, 65, 765, 865. Verify part number or thread size before ordering. Many of the models used more than one size. (Item #: 174701, Ref: 893419M1) $12.80

Lower Lift Arm Pin - Used on tractors with square axles, this pin is 5 1/2 inches long and 1 1/8 inches in diameter. Replaces part numbers 906263M2, 1695314V1, 1695314M1, 1695531M1, 1867243M1, 354101X1 (Item #: 173351, Ref: 1695314M1) $15.90

Lower Lift Arm, RH or LH, CAT II - This replacement Lower Lift Arm is Category II on both ends. It measures approximately 38 inches center to center on the balls. Used on 165, 168, 185, 188, 260, 261, 265, 275, 282 UK, 282 US Built, 285 (FR), 360, 362, 365, 372, 375, 375E Brazilian, 390, 390T, 575, 675. Replaces 1869218M1, 1863435M94, 1863435M95, 1863436M94, 1869219M1, 810285M92, 886428M1, 893430M93. (Item #: 173308, Ref: 1863435M95) $168.95

Lower Link Adapter, LH - For tractor models 150, (165, 170, 180 serial number 9A130003), 175 UK, 178 UK, 30, (65 High Clearance). (Item #: 172691, Ref: 885985M1) $65.00

Lower Link Adapter, RH - For tractor models 150, (165, 170, 180 serial number 9A130003), 175 UK, 178 UK, 30, (65 High Clearance). (Item #: 172692, Ref: 885984M1) $71.00

No
Picture
Lower Link Arm Pin - For Massey Ferguson tractor models 135, 165 (s/n 9A130003-later), 175 (s/n 9A130003-later), 180 (s/n 9A130003-later), 235, 245, 265, 275, Compatible with Massey Ferguson Construction and industrial models 30, 40, Replaces Massey Ferguson OEM number 530227M91, (Item #: 174193) $98.00

Pin - Pivot Pin. For swinging drawbar. 1 inch outside diameter by 1-7/8 inch working length. Not for swinging drawbar kit SDA6 which requires part number Pt3, 7/8 inch diameter pin. Fits original swinging drawbar 184611M1. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF230, MF235, MF245, MF255 industrials: MF20C, MF30B, MF40B, MF3165. For MF165, MF65. (Item #: 155129, Ref: 184630M1) $7.70

Response Control Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 172613, Ref: 1661918M91) $26.80

Retaining Clip Ring - For Massey Ferguson tractor models TE20, TEA20, 35, 35X, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 461, 543, 575, 590, 675, 690, 698, 699, 3050, 3060, 3070, 3080, 3090, 3095, 3140, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 193092M1, (Item #: 173702) $3.90

No
Picture
Right Hand Stabilizer Bracket - For Massey Ferguson tractor models 135, 165, 175, 180, 255, 265, 275, Compatible with Massey Ferguson Construction and industrial models 30, 31, 40, 3165, Replaces Massey Ferguson OEM number 49B59, Fits Massey Ferguson tractor models 145, All with out roll bar and with square axle, 7/8" Stabilizer Pin Hole, For Left Hand Bracket use Item #: 174073, (Item #: 174074) $54.00

Rocker Link - For tractor models 135, 150, 165, 20, 203, 205, 20C, 2135, 2200, 230, 245, 30, 302, 304, 3165, 40, 50, F40, FE35. (Item #: 165755, Ref: 180973M2) $22.60

No
Picture
Rod Yoke - For Massey Ferguson tractor models 35X, 135, 150, 165, 175, 230, 231, 240, 245, 250, 255, 265, 275, 285, 431, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 30, 202, 203, 204, 205, 302, 304, 2135, Replaces Massey Ferguson OEM number 826410M92, 1660372M91, 1660372V91, 184350M91, 897683M91, Left Hand, (Item #: 174479) $41.70

Shaft - Shaft and pinion, leveling box. 15.120 inches long, 1.000 inch diameter, 5.620 inches of thread. For heavy-duty and extra heavy-duty leveling boxes 897649M1 and 897649EXHD. For tractors: MF65, MF165, MF175, MF265. Replaces 1860833M1. (Item #: 173271, Ref: 1860833M2) $9.01

Shaft Level Box - Shaft and pinion, leveling box, 14-5/8 inches long, 3/4 inch NC threads. For tractors: MF65 Hi-Clearance, MF150 Row Crop, MF165 Row Crop Industrials: 30, 40. (Item #: 113926, Ref: 897681M2) $15.10

Stabilizer Arm - For Massey Ferguson tractor models 65, 165, 175, 180, Right or Left stabilizer arm, 7/8" Pin holes, 34" Center to center, (Item #: 115668) $16.50

Stabilizer Arm End Left Hand - End only for JSA1003 stabilizer arm. 7/8 inch national fine left hand thread, 7/8 inch pin hole, 9-1/8 inch length, center of hole to end. For MF165, MF175, MF180, MF65. (Item #: 180376, Ref: 506799M1) $15.40

Stabilizer Bar - Stabilizer Arm, complete with both ends. Adjustable from 27-1/2 inches to 35 inches, body length 22 inches, thread size 7/8 inch, pin holes 7/8 inch. For MF165, MF175, MF180, MF65. Both ends are adjustable to obtain desired length. (Item #: 164616, Ref: JSA1003) $23.30

Stabilizer Bracket - Stabilizer bracket, right hand or left hand used on flat axle tractors. For tractor models 165, 175, 180, 65. 5-1/2 inch drop below the axle. (Item #: 179556, Ref: SKB150) $94.00

No
Picture
Stabilizer Bracket Kit Left Hand - Bracket kit, Left Hand for SK-6756 std. incl. SKB-70 bracket, P-7056 pin, hex nut with lockwasher and linch pin with chain. For MF165, MF175, MF180, MF65 (Item #: 183765, Ref: SKB3240) $80.00

Stabilizer Bracket Kit Right Hand - Bracket kit, Right Hand for SK-6756 std. incl. SKB-69 bracket, P-7056 pin, hex nut with lockwasher and linch pin with chain. For MF165, MF175, MF180, MF65 (Item #: 183767, Ref: SKB3250) $66.00

Stabilizer Bracket Left Hand High Clearance - Stabilizer bracket, left hand for high-clearance tractors (SK65-HCJ) with a 6.5 inch drop under axle. For tractor models MF165, MF175, MF180, MF65. (Item #: 180234, Ref: SKB62) $114.00

Stabilizer Bracket Left Hand Low Clearance - Stabilizer bracket, left hand for low-clearance tractors (SK65J) with a 3.5 inch drop under axle. For tractor models MF165, MF175, MF180, MF65. (Item #: 180235, Ref: SKB67) $124.00

Stabilizer Bracket Left Hand Standard Clearance - Stabilizer bracket, left hand for standard clearance tractors (SK-6756 and SBK-3240) with a 3 inch drop under axle. For tractor models MF165, MF175, MF180, MF65. (Item #: 179551, Ref: SKB70) $126.00

Stabilizer Bracket Right Hand High Clearance - Stabilizer bracket, right hand for high-clearance tractors (SK65-HCJ). For MF165, MF175, MF180, MF65 (Item #: 180237, Ref: SKB63) $126.00

Stabilizer Bracket Right Hand Low Clearance - Stabilizer bracket, right hand for low-clearance tractors (SK65J). For tractor models MF165, MF175, MF180, MF65. (Item #: 180238, Ref: SKB68) $122.00

Stabilizer Bracket Right Hand Standard Clearance - Stabilizer bracket, right hand for standard clearance tractors (SK-6756 and SBK-3250). For tractor models MF165, MF175, MF180, MF65. (Item #: 179553, Ref: SKB69) $123.00

Stabilizer Kit - Stabilizer kit, flat axle models. For tractors: MF150, MF165, MF175, MF180. Contains 2 adjustable arms, right and left brackets, pins and hardware for mounting. (Item #: 180151, Ref: SK150FA) $145.00

Stabilizer Kit - Stabilizer Kit, high-clearance. For tractors: MF65, MF165, MF175, MF180. Contains 2 adjustable arms, right and left brackets, pins and hardware for mounting. Replaces 677187 and 677188. 6 1/2 inch drop. (Item #: 178909, Ref: SK65HCJ) $187.00

Stabilizer Kit Low Clearance - This Stabilizer Kit is for tractor models MF65, MF165, MF175, MF180. Contains 2 adjustable arms, right and left brackets, pins and hardware as pictured. Replaces 677172 and 677173. (Item #: 184545, Ref: SK65J) $199.00

Stabilizer Pin - This Pin is used with telescoping stabilizers and with 514992M2 bracket. Uses 186809M1 Nut, sold separately. It replaces original part number 521006M1. Large shoulder 1.10 in. dia x 1.23 in. long, smaller shoulder .862 in. dia x 2.28 in. long. Threads 3/4 - 16 UNF Right Hand Thread (Item #: 170300, Ref: 521006M1) $21.60

Stabilizer Pin - For Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 168, 175, 180, 185, 265, 275, 282, 360, 383, 398, 399, 565, 575, Compatible with Massey Ferguson Construction and industrial models 20, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, 220, 302, 304, 356, 2135, 3165, Replaces Massey Ferguson OEM number 893420M1, 354568X1, Length: 3", Pin Diameter: .867", Pin Hole: .388", Thread: UNF - 3/4" -16, (Item #: 170492) $6.70

Stabilizer Pin Nut - This Stabilizer Pin Nut is used with 521006M1 Pin. It is 3/4 16 UNF Right Hand Thread. It replaces original part number 3609473M1, 186809V1, 186809M91, 186809M1, 767743 (Item #: 116643, Ref: 186809M1) $2.50

Swinging Drawbar - Off-Set drawbar is 35 3/4 inches long, 2 inches wide, 1 1/8 inches thick with a 3 inch offset. For tractor models 135, 150, 165, 20, 50, 65. (Item #: 153796, Ref: 184629M1) $44.98

No
Picture
Top Link Pin - Category 2 - For Massey Ferguson tractor models 135, 165, 175, 180, 235, 275, 285, 1080, 1085, 1100, 1105, 1135, 1150, Replaces Massey Ferguson OEM number 523954M1, Replaces Case IH OEM number B500188, Replaces Ford OEM number 81718903, Replaces John Deere OEM number PM03011, Replaces manufacturer number VLK7005, VPL7015, Diameter: 1", Overall length: 5-3/4", Useable length: 3-3/4", (Item #: 176695) $3.60

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $5.40

Universal Parts and Accessories
Category: Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.48

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $8.90

Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 180485M1) $44.30

$Massey Ferguson 165 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $60.00

$Massey Ferguson 165 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $40.30

$Massey Ferguson 165 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$Massey Ferguson 165 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $58.00

$Massey Ferguson 165 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $58.00

$Massey Ferguson 165 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $138.00

$Massey Ferguson 165 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $99.00

$Massey Ferguson 165 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $95.30

$Massey Ferguson 165 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $104.00

$Massey Ferguson 165 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $298.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $77.00

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $47.71

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.30

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.20

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $42.70

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $39.30

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $58.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $60.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $63.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $63.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $40.00

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $335.41

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $328.58

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $22.00

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $28.00

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $97.32

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $28.00

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.50

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $86.02

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $67.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $85.44

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.00

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $92.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $23.98

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $70.00

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $98.07

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $71.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $263.00

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $26.10

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All MF165 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy