FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 245 Parts

Category: Hydraulic System

[Categories] [All MF245 Parts] [All Massey Ferguson Models]

Adapter Plate Bushing, Set of 4 - Set of 4 Rubber Bushing for front mount hydraulic adapter plates. For tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF235 orchard, MF245 orchard industrials: 20, 20C, 30, 30B, 30D, 35, 40, 40B, 40E, 50, 50A, 50C, 50D, 202, 203, 204, 205, 2135, 2200, 3165. Used in adapter plates 704812M93 and 708639M91. For 1134, 1143, 1144, 1153, 1163, 1164, 1183, 24, 260, 33, 34, 43, 44, 44-0, 44S, 540, 54C, 62, 63, 63C, 64, 82, 83 NOTE: Order 1 for a set of 4. (Item #: 173266, Ref: 1400022M91) $22.60

Auxiliary Hydraulic Pump - This Auxiliary Hydraulic Pump is for models: 135 UK, 165, 165 UK, 175, 178, 180, 1080, 1085, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 298, 670, 690, 698, 699. Replaces OEM Numbers 1663627M92, 1686765M1, 1686765M91, 1686766M91, 1869458M92, 526099M93, 531604M92, 5316073M92, 531607M92, 531607M93, 886367M95, 886367M96, 531607M91. (Item #: 112404, Ref: 1663627M92) $316.37

Auxiliary Pump Drive Gear - This Auxiliary Pump Drive Gear has 58 teeth and 21 splines. It is used on Massey Ferguson models 135, 150, 165, 175, 20C, 20E, 230, 235, 240, 240S, 243, 245, 250, 250X Brazilian, 253, 255, 265, 270, 275, 283, 290, 30, 30E, 31, 40B, 451, 50C, 50E. Replace OEM number 1868540M1 (Item #: 187207) $179.00

Center Housing - For tractor models 231, 240, 245 serial number up to 9A349239, 250, 255 serial number after 9A250920, 265, 270, 290, 276 serial number up to T192032, 690 2WD serial number up to T192032, 690 4WD serial number up to T314008, 20C, 20D, 30B with rear axle serial number CE17398 and up, 30E, 50C with rear axle serial number CE17398 and up, 50F. center housing. Part number stamped on right side. (Item #: 179945, Ref: 1664511M3) $1249.01

Control Lever Roller - Used on Mark I and Mark II Massey Ferguson hydraulic pumps, this roller fits some of the following models: 20, 20C, 202, 203, 205, 2135, 2200, 30, 302, 304, 31, 3165, 40, FE135, 135, 135 UK, 150, 165, 175, 180, 230, 245 (Item #: 179419, Ref: 898202M1) $5.20

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.80

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $10.90

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Item #: 163454, Ref: 898136M1) $21.30

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.00

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $13.50

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.40

No
Picture
Draft Control Shaft - This Draft Control Shaft is used on 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E. Replaces 1870243M92 (Item #: 170866, Ref: 1870243M92) $12.80

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $6.00

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $430.00

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $117.00

Hydraulic Filter Kit - This Kit contains 521451M1 filter, 185839M91 cap and 185555M1 bowl. It is used on Massey Ferguson models: 1080, 135, 145, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 245, 30, 31, 3165, 35, 35X, 40, 50, 65, FE35 (Item #: 184914, Ref: 185839M92) $28.10

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Lift Pump - For tractor models 230, 245, 250, 255, 265, 275, 283, 298, 50C, 670, 690, 698, 699), (20C, 30 Ind. all axle serial number FE101> without pressure control), (30B, 40 all axle serial number FF100> without pressure control), (30E, 50E all less auxiliary hydraulic) 240 8/91>. Hydraulic Lift Pump. Replaces 1661616M91, 1672148M92, 1675125M91, 1872449M96. (Item #: 113740, Ref: 1683301M92) $480.00

Hydraulic Lift Pump - For MF 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 290, 298, 670, 690, 698, 699, Ind 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C. Replaces Hydraulic Pump that has a Pressure Control Valve. Pressure control valve does not come with pump. Also note that your old valve may not fit this pump as there were more than one size. Uses valve number 1681789M91. Also replaces 1675125M92, 1675126M92, 1868439M98. (60468S) (Item #: 113740, Ref: 1672251M92) $480.00

Hydraulic Lift Pump Rebuild Kit - Repairs OEM pump. Replaces OEM Kit number 1810860M91. Chamber has 4 holes. Bottom hole = 1/2 inch. For tractor models 135, 165, 230, 235, 240, 245, 250, 255, 265, 275, 285, 290, 298, 350, 390, 398, 399, 675, 690, 698, 698T, 699, 1080, 1085. (Item #: 173258, Ref: 556603) $191.00

Hydraulic Piston - This is an early style 3-3/8 inch, three ring piston. It uses 3 - 897597M1 rings, sold separately. Used on 135, 135 UK, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31 combine, 20, 30, 175 UK, 178 UK, 20C, 30B, 40B, 50C, 50D, MF 40. Replaces 899596M91 (Item #: 179572, Ref: 899596M91) $36.00

Hydraulic Piston - For tractor models 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50D, 50E, 670, 698, 699. Seal kit is available as part number 2528201K1 . Piston is 3.375 inch diameter. (Item #: 173143, Ref: 1665738M91) $48.37

Hydraulic Piston Ring - Used on 899596M91 3 -3/8 inch piston. Three are required. Priced and sold individually. Replaces original part number 897597M1. For tractor models 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31, 20, 30, 175, 178, 20C, 30B, 40B, 50C, 50D and 40. (Item #: 176230, Ref: 897597M1) $6.10

Hydraulic Pump - Dynamatic - For Massey Ferguson tractor models 135, 150, 165, 175, 178, 235, 245, 255, 265, 275, 451, 471, 481, Compatible with Massey Ferguson Construction and industrial models 20C, 30E, 40B, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 886821M94, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 119896, (Item #: 157747) $365.00

No
Picture
Hydraulic Pump Kit, MK III, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 230, 231, 233, 234, 235, 240, 243, 245, 250, 253, 254, 255, 260, 261, 263, 265, 265S, 273, 274, 275, 283, 284, 285, 285S, 290, 294, 298, 340, 342, 350, 353, 353LX, 355, 356, 360, 362, 363, 364, 364S, 365, 372, 373, 374, 374S, 375, 377, 382, 383, 384, 384S, 387, 390, 390T, 393, 394, 394S, 396, 397, 398, 399, 440, 550, 560, 565, 575, 590, 592, 595, 675, 690, 698, 699, 1200, 1250, 4225, 4235, 4240, 4245, 4260, 4265, 4270, 4315, 4325, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 20B, 20D, 20E, 30D, 30E, Replaces Massey Ferguson OEM number 1810860M93, 1810860M92, Mark III Pump, 25 mm, (Item #: 168738) $214.50

Hydraulic Pump O-Ring and Gasket Kit - This O-Ring Kit with Gaskets is used on 230, 235, 245, 255, 265, 275, 1080, 1085, 285, 231, 240, 250, 253, 360, 362, 270, 282, 283, 290, 298, 20D, 30E, 40E Replaces 1810680M91 (Item #: 165750, Ref: 1810680M91) $14.80

Hydraulic Pump Piston Ring - Hydraulic Pump Piston Ring is used with 1860038M1. Two are used per piston, 4 per Tractor. Sold individually. (Item #: 165929, Ref: 897493M1) $1.90

Hydraulic Pump Rear Cam Block, Used - For Massey Ferguson tractor models F40, TO35, 30, 31, 35, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 205, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 565, 575, 590, 595, 675, 690, 698, 699, 1080, 1085, 2135, Compatible with Massey Ferguson Combine(s) 40, 550, 765, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 302, 304, 765, 2200, 2220, 3165, Replaces Massey Ferguson OEM number 894608M1, For a new version of this item use Item #: 113790, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460533) $17.22

No
Picture
Hydraulic Pump Response Spring - For Massey Ferguson tractor models 178, 230, 231, 235, 240, 240P, 245, 250, 251XE, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290, 298, 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 543, 670, 690, 698, 699, 1085, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1868454M2, (Item #: 173689) $1.30

Hydraulic Pump Strainer Assembly - Verify measurements of 2 7/16 inch outside diameter, 1 5/8-7/16 inch inside diameter, 3 3/4 inch height. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1687042M91, 1687042V91, 1810744M91, 1870199M92, 1687042M1. (Item #: 116132, Ref: 1687042M91) $10.60

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.90

Hydraulic Valve - For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. Replaces 3000261X1, 1870763M92, 1681786M1 (Item #: 165752, Ref: 1870763M92) $39.80

No
Picture
Hydraulic Valve Kit - For Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 175, 178, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, (Item #: 176627) $351.61

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 164384, Ref: S.65502) $509.00

Hydraulic valve - This is a Single Hydraulic Remote Valve. It bolts to the lift cover in place of 180908M1 cap. (Item #: 166954, Ref: 12012002) $253.00

Lever, Draft Control - This Draft Control Lever is used on 230, 235, 245, 255, 265, 275, 231, 240, 250, 270, 282, 283, 290, 298. Replaces 1870340M92, 1870340M91 (Item #: 179600, Ref: 1870340M92) $16.40

Lever, Position Control - This Position Control Lever is used on 230, 235, 245, 255, 265, 275, 231, 240, 250, 270, 282, 283, 290, 298. Replaces 1870341M92 (Item #: 170906, Ref: 1870341M92) $18.60

Lift Arm - Hydraulic Ram Lift arm for tractor models MF 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 670, 690, 698, 1080, 1085. (Item #: 151047, Ref: 886404M2) $88.00

Lift Arm - For tractor models 135, 175, 235, 230, 245, 202, 204, 203, 205, 302, 304, 2135, 3165, 2200, 30, 20, 40, 40B, 40C. Hydraulic Lift Arm, right or left. 51 Spline. Used with 897567M3 Cross Shaft REPLACES : 885445M91 Check Side Before Ordering Because Arm Is Used As RH On Some Models And RH and LH On Others (A) (Item #: 160183, Ref: 885444M91) $66.00

Lift Arm - Left Hand Lift Arm. For tractor models 135, 150, 165, 175, 20, 203, 205, 235, 245, 255, 265, 275, 285, 30, 30B, 30D, 3165, 40, 40B. (Item #: 160184, Ref: 885446M1) $144.00

Lift Clevis - This lift clevis, has on the inside of the yoke, a multi-level face. If you need a smooth face on the inside of the yoke, this is not the correct part and we do not have what you need available. For tractor models 135UK, 165, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 30, 302, 304, 31, 3165, 35, 40, 50, F40, MH50, TO35. Hydraulic Lift Clevis. (Item #: 173304, Ref: 180972M2) $26.90

Lift Clevis Bushing RH - Right hand slotted bushing for rocker on draft control clevis. For 135, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 230, 245, 30, 302, 304, 31, 3165, 35, 40, 50, 65, F40, FE35, MH50, TO35. Replaces 181982M1, 180974M1 (Item #: 153600, Ref: 181982M1) $6.50

Lift Clevis Bushing, LH - Left hand slotted bushing for rocker on draft control clevis. For 135, 150, 165, 165UK, 175, 175UK, 185UK, 180, 20, 200, 202, 203, 204, 205, 20C, 20D, 2135, 2200, 230, 235, 240, 240S, 245, 265S, 271, 281, 285S, 30, 302, 304, 31, 3165, 35, 40, 50, 65, FE35, MH50, TO35. (Item #: 153601, Ref: 180974M1) $6.60

Lift Cover - This lift cover is used on many Massey Ferguson Tractors. It uses a 3 1/8 inch Piston. It replaces those marked: 1861320M1, 1870951M2, 884615M1, 1870955M2, 1693551M1. Replaces 1693547M1, 1693547M91, 1693551M91, 3761903M91, 884612M92, 190861M2, 1870950M91. (Item #: 173139, Ref: 3761903M91) $582.00

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Item #: 112052, Ref: 886549M2) $1.70

Lift Cylinder - Cylinder, hydraulic lift for 3-1/8 inch diameter piston. For tractors: MF135, MF150, MF165, MF230, MF235, MF240, MF245, MF250, MF282 Industrials: 20, 20C, 20D, 30, 30E, 40 202, 203, 204, 205, 302, 304, 2135, 3165. Use with 1665737M91 piston with rings. Replaces 897560M1, 897560M2 (Item #: 163456, Ref: 897560M3) $134.00

Lift Cylinder - For MF 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 290, Ind. 20, 20C, 30, 30B, 40, 40B, 50C. Lift cylinder for 3 3/8 inch piston. (Item #: 163480, Ref: 1671082M1) $106.00

Lift Cylinder Piston Seal Kit - Used with 1665738M91 piston. For tractor models 20, 20C, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50E, 135, 165, 175, 180, 230, 235, 245, 255, 265, 270. (Item #: 173353, Ref: 2528201K1) $6.80

Lift Cylinder Piston with Rings - For tractor models 135, 150, 165, 230, 235, 240, 245, 250, 255, 265, 282, Ind: 20, 20C, 20D, 30, 30E, 40, 202, 203, 204, 205, 302, 304, 2135, 3165. Hydraulic Lift Cylinder Piston with Rings. 3 1/8 inch diameter. Replaces 897561M91. (Item #: 184692, Ref: 1665737M91) $47.90

Lift Handle Knob and Stud - Knob For tractor models 35, 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 270, 275, 282, 283, 285, 290, 298, 698, 699, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 2135, 3165. Replaces 1860403M1, 898201M1 (Item #: 163511, Ref: 1860403M1) $10.30

Lift Pump - For tractor models 135, 150, 165, 175, 180, and (230, 245 fitted with MkII Pump). All late production models with late 21 spline camshaft in old MkII pump. Replaces 1684583M92, 1868965M92, 535087M91. (Item #: 170929, Ref: 535225M94) $481.00

Lift Pump - For tractor models 135, 150, 165, 175, 20C, 235, 245, 255, 265, 275, 30, 31, 40B, 50C, 50D, (30E, 50E, 178 ALL UK). 12 Spline Shaft. (Item #: 119896, Ref: 886821M94) $227.00

Lift Pump Adapter Plate - For 35, 150, 65, 135, 50, 235, 245, IND: 20, 20C, 30, 30B, 30D, 35, 40, 50, 202, 203, 204, 205, 2135, 2200. Front Mounted Hydraulic Pump Adapter Plate. 5 1/4 inch diameter with 3 bushings, mounting holes 3 3/8 inch on center, 3/4 inch left hand threaded center hole. (Item #: 118288, Ref: 704812M93) $68.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $9.80

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.60

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.80

Lift Pump Piston - This Lift Pump Piston has a 0.980 Inch Piston. Uses 897493M1 rings, not included. For tractors: 135, 150, 165, 175, 180, 230, 235, 245, 1080, 1085, 255, 265, 275, 285, 231, 240, 250, 253, 360, 362, 20D, 30E, 40E, 270, 282, 283, 290, 298. Replaces 1860038H1, 1860038M91, 1860038V1, 3158071M1, 518476M1 (Item #: 173306, Ref: 1860038M1) $5.70

Lift Pump Vertical Relief Valve - This Lift Pump is the same as 1684582M92 except that it has a vertical relief valve. You need to ensure that the position of this valve will fit your tractor models (135 UK serial number <116248 with multi-power transmission), 135, 150, 165, 175, 178, 180, Industrials 20, 30, 40, 2135. All with 10 spline camshaft. Replaces 1684582M92, 194698M91, 519343M98. (Item #: 113267, Ref: 1684582M92VERT) $293.00

Lift Ram 2.50 Inch - Used with 897567M3 cross shaft, 2.50 inch on both ends, 54 splines. For tractor models FE135, 135, 150, 165, 20, 20C, 20D, 20E, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 265, 30, 30E, 302, 304, 3165, 40, 40E. (Item #: 167068, Ref: 886405M1) $81.00

Lift Response Plate - This Lift Response Plate is used on Massey Ferguson Tractors: 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1884877M93, 1872648M93 (Item #: 173307, Ref: 1872648M93) $54.00

Lift Shaft - 51 spline, 2 3/16 inch diameter. (1 hole in end). Replaces 897567M3, 897567V3. (Item #: 151049, Ref: 897567M3) $82.00

Link Head - For tractor models 135, 165, 175, 180, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 298, 30, 30B, 30D, 30E, 31, 362, 383, 390T, 391, 392, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. (Item #: 172689, Ref: 1863389M1) $46.24

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

$Massey Ferguson 245 Piston Ring, Hydraulic - 3 1\8, Pack of 3$
Piston Ring, Hydraulic - 3 1/8, Pack of 3 - For tractor models 135, 135 UK, 150, 165, 165 UK, 230, 231, 235, 245, (265 serial number up to 9A349239), 282, 20, 20C, 30, 40, 2135, 3165. (Item #: 176222, Ref: 897564M1) $4.10

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $30.00

Pressure Control Diaphram - Used on Mark III pumps, this diaphram has a 0.779 inch stud diameter. For tractor models 135, 150, 165, 175, 180, 20C, 230, 231, 235, 240P, 245, 255, 265, 282, 285, 298, 30, 30B, 31, 40, 40B, 50C, 698, 699. Replaces 1860114M91, 1860114V91 (Item #: 172378, Ref: 1860114M91) $13.57

Pressure Control Shaft - Used on some or the following Massey Ferguson Models: 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E, this part measures 10 - 9/16 inches. Verify measurement before ordering as many of these models used more than one size. (Item #: 170902, Ref: 1870219M93) $19.30

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $4.20

Pressure Control Valve - This hydraulic pressure control valve fits the following tractor models: 30, 40, 235, 245, 261, 275, 282, 285 (serial number 9A349239 and below), 298, and 698. It replaces part numbers: 1680061M91, 1869966M94, and VPK1806. (Item #: 167933, Ref: 1680061M91) $145.00

Quadrant Support - This Quadrant Support is used on Massey Ferguson 135UK serial 439191 and up, 165UK serial number 132849 and up, 230 with Lift Cover 1870952M91, 231, 235 with Lift Cover 1870955M1, 255, 265, 270, 275, 282, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 390, 698, 699, Industrial 20 with Lift Cover 1870955M1, 20C with Lift Cover 1870950M91, 20D, 20E, 20F, 30 with Lift Cover 1870955M1, 30B, 30D, 30E, 40 with Lift Cover 1870955M1, 40B, 40E, 50C, 50D, 50E. Replaces 1870240M1 (Item #: 164696, Ref: 1870240M1) $31.27

Relief Valve - For tractor models TO35, 135, 150, 165, 175, 180, 235, 245, 255, 265, 2705, 2745, 35, 50, 66. (2750 psi) Replaces 884747M93, 884747M92, 884747M93, 883402M1, 40A63 (Item #: 163455, Ref: 883402M1) $18.00

Response Control Shaft - This Response Control Shaft is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 898208M2 (Item #: 179593, Ref: 898208M2) $22.20

Response Cover - This Response Cover is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1668053M1 (Item #: 180324, Ref: 1668053M1) $15.70

Response Lever - This Response Lever is used on 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1662278M2 (Item #: 180325, Ref: 1662278M2) $4.30

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Stand Pipe, Hydraulic Oil Pressure - 12.500 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Item #: 124227, Ref: 898229M1) $20.50

Standpipe, Hydraulic - Used on models with pressure control, 12.5 inches long. For tractor models 150, 175, 180, 235, 245, 30, 31, (175, 178 serial number up to 709936), (135 serial number up to 79481), (165 serial number up to 520708), (185 serial number up to 320843). (Item #: 173347, Ref: 883788M91) $23.00

Standpipe, Hydraulic Oil Pressure - 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Item #: 155347, Ref: 1869119M1) $16.90

Universal Parts and Accessories
Category: Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.95

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $117.34

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $359.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $696.00

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $148.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $868.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $74.00

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $20.98

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1307.44

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.70

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $12.30

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $14.40

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $8.98

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $311.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All MF245 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy