Bearing - Bearing, outer, for PTO Output Shaft (inside diameter 1.771 inch X outside diameter 2.952 inch x .629 inch thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239. For tractors using snap rings on bearing. (Item #: 172368, Ref: 195498M1)$31.00
Bearing - Bearing, for PTO front drive shaft housing, 2.8120 inch outside diameter determine bearing outside diameter before ordering. For 6 and 8 speed and multi-power transmissions. Replaces 899377M1, 3760514M1, 899377M2 (Item #: 176234, Ref: 899377M2)$23.90
Output Shaft, PTO Seal - A PTO output shaft outer oil seal measures 2.323 inches inside diameter, 3.150 inches inside diameter and is .394 inches wide. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. Verify measurements to make sure you are ordering the correct seal. (Item #: 107013, Ref: 834216M1)$9.50
NOTE
PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.
PTO Gear - This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STANDARD TRANSMSSION/MULTI-POWER SERIAL NUMBER 130774->. For 8 speed transmission, 53 teeth, 21 splines. (Item #: 166907, Ref: 1868532M1)$21.98
PTO Gear, Constant Mesh - This Constant Mesh Gear has 53 Teeth and 15 Splines. Used on Massey Ferguson 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590. It replaces part number 899329M1 (Item #: 153626, Ref: 899329M1)$98.00
PTO Gear, Used - For Massey Ferguson tractor models 30, 31, 40, 135, 150, 165, 175, 178, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 565, 575, 590, Compatible with Massey Ferguson Construction and industrial models 20, 30, 31, 40, 50, 50C, 202, 203, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 899329M1, Splines: 15, Teeth: 53, For a new version of this item use Item #: 153626, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460709)$70.01
PTO Lever Knob - This PTO Lever Knob is used with 1672622M94 PTO Lever. It replaces original part number 1877461M1 (Item #: 167635, Ref: 1877461M1)$5.20
PTO Lever, Aluminum - This is an Aluminum PTO Lever used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 240, 250, 270, 282, 283, 20, 20B, 20C, 20F, 30B, 30E, 40B, 40E, 50E (Item #: 155294, Ref: 1863502M1)$48.00
PTO Lever, Steel - This is a Steel PTO Lever used on 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 240, 250, 270, 282, 283, 20, 20B, 20C, 20F, 30B, 30E, 40B, 40E, 50E. Order 1877461M1 knob if needed. Replaces original part number 1672622M94 (Item #: 123092, Ref: 1672622M94)$13.70
PTO Retainer Housing - Retainer Housing, PTO Pinion Shaft, Multi-Power Transmission. Inside diameter of tube is 2.21 inches. Unit is less bearing and seal. For MF135, MF150, MF165, MF175, MF180, MF235, MF245, MF255, MF265, MF275, MF35, MF50, MF65, FE35. Note: If replacing old style housing that uses a bushing: seal number 1860867M3, bearing number 886668M1 and throw out bearing carrier number 886727M4 must be used also. (Item #: 110786, Ref: 1860889M91)$167.00
PTO Seal Retainer Housing - This Seal Retainer Housing is used on many Massey Ferguson tractors. Uses 195522M1 o-ring, not included. Replaces part numbers 180465M1, 180465V1 (Item #: 151850, Ref: 180465M1)$23.60
PTO Seal Shield - This PTO Seal Shield is used on many Massey models with single speed PTO, including; (165UK Engine Serial number 144682 and up), (230 Rear Axle Serial Number FD101, CD8020 and up), 231, 231S, (235 Transmission Serial Number FD101 and up), 240 up to Engine Serial Number P38370), 245, 250, (253 up to Engine Serial P38370), (255 Wet Brakes), 282, 283, )283 Brazil up to Serial Number 2915), 290, (360, 375, 383, 390, 390T up to Engine Serial Number P38370), 670, 690, 698, 699, (20 Rear Axle Serial Number FD101, CD8028 and up), 20C, 20D, 20E, (20F up to Serial Number 5101D0782), (30 Wet Brakes), 30B, 30D, 30E, (31 Rear Axle Serial Number FD101, CD8020 and up), (40 Wet Brakes), 40B, 40E, 50C, 50D, 50E. Replaces 533183M1. Verify Part Number before ordering. (Item #: 179732, Ref: 533183M1)$4.20
PTO Shaft - For 30 late production with dry brakes and Live PTO 165 UK serial number 130773-144682 with Live PTO, 135 UK serial number 439191 and up with Live PTO, 230 with rear axle serial number below FD101 or CD8028 with Live PTO, (255, 265, 275 all with dry brakes and Live PTO), 40 with dry brakes rear axle serial number below FD101 or CD8028 with Live PTO, (135, 150, 175, 20, 31 all with Live PTO), 165 with multi-power and standard transmission with Live PTO, 235 with rear axle serial number below FD101 with Live PTO. PTO Shaft 540 RPM, 24 1/32 inches long, 21 drive splines. (Item #: 166771, Ref: 1868557M93)$158.00
PTO Shifter Assembly Kit - This Kit contains one each of: 3760665M1 PTO Cover, 1870594M92 PTO Fork, 1672622M94 Lever, 1877461M1 Lever Knob, 180417M1 Plunger Spring, 180418M2 Detent Plunger and 181217M1 Gasket. (Item #: 182983, Ref: 888108KIT)$82.00
Pinion Shaft, PTO - 17 teeth, 25 spline. For tractor models 135, 150, 165, 235, 245, 255, 265, 275, 285, (290 with multi power trans). Replaces 1868528M91 and 1868528M92 (Item #: 166864, Ref: 1868528M91)$39.98
Universal Parts and Accessories Category: PTO / Driveline
Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600)$91.00
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124837, Ref: AB4111WY138)$122.00
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$176.91
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
Overrun Coupler with Quick Release - This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. Rated up to 70 horsepower. (Item #: 182532, Ref: S.23639)$56.00
PTO Adapter - I.D. 1.125 inch 6 spline Female to O.D. 1.375 inch 6 spline Male, ExtendsL 1.125 inches, Length: 3 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103190, Ref: PA01)$11.60
PTO Adapter - Inside diameter 1.375 inch 21 spline female to outside diameter 1.375 inch 6 spline male. Extends: 4.125 inch, length: 6.375 inch. Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103188, Ref: PA08)$31.00
PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inches, Length: 6.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103187, Ref: PA09)$70.00
PTO Adapter - Extends and increases: 1 1/8" female 6 spline to 1 3/8" male 6 spline. 4-5/8" length. Extends PTO 2-3/4" . Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". Also Replaces T353F. (Item #: 103191, Ref: PA04)$21.00
PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.125 inch 6 spline male, Extends: 2.750 inches, Length: 5.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103192, Ref: PA05)$19.80
PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends PTO Shaft 4.00 inches, Length: 5.75 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 121311, Ref: PA06)$24.00
PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.125 inches, Length: 5.875 inches, Max HP: 70 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 152729, Ref: PA11)$37.00
PTO Adapter - I.D. 1.750" 20 spline female to O.D. 1.375" 6 spline inch male, Extends: 4.625", Length: 7.50", Max HP: 100. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: PA12)$64.58
PTO Adapter - I.D. 1.750 inch 20 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.625 inches, Length: 7.00 inches, Max HP: 100 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103195, Ref: PA14)$50.00
PTO Driveline - Weasler Driveline 14006127ST is designed for fertilizer spreader and general applications., Designed for fertilizer spreader general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 1, Compressed (Closed) Length: 27", Extended Length: 30", Compressed Overall Length: 34.08", Extended Overall Length: 37.08", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 15 HP at 540 RPMS and 23 HP at 1000 RPMS, (Item #: 131232)$124.00
PTO Driveline - Weasler Driveline 14006340ST is designed for fertilizer spreader and general applications., Designed for finishing mower general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 3, Compressed (Closed) Length: 31.89", Compressed Overall Length: 39.93", Extended Length: 48.94", Extended Overall Length: 56.98", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 29 HP at 540 RPMS and 44 HP at 1000 RPMS, (Item #: 131234)$159.00
PTO Driveline - Weasler Driveline 14006430ST is designed for for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 4, Compressed (Closed) Length: 22.05", Compressed Overall Length: 30.00", Extended Length: 30.28", Extended Overall Length: 40.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, Rated for 36 HP at 540 RPMS and 56 HP at 1000 RPMS, (Item #: 131238)$169.98
PTO Driveline - Weasler Driveline 14006432ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 24.02", Compressed Overall Length: 31.97", Extended Length: 35.55", Extended Overall Length: 43.50", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131239)$162.00
PTO Driveline - Weasler Driveline 14006437ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 37.00", Compressed Overall Length: 46.39", Extended Length: 43.67", Extended Overall Length: 53.06", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131241)$170.00
PTO Driveline - Weasler Driveline 14006442ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 33.86", Compressed Overall Length: 41.81", Extended Length: 53.88", Extended Overall Length: 63.27", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round�, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131242)$179.00
PTO Driveline - Weasler Driveline 14006448ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 39.76", Compressed Overall Length: 48.18", Extended Length: 61.81", Extended Overall Length: 70.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131243)$169.00
PTO Driveline - Weasler Driveline 14006542ST is designed designed for rotary cutter general applications, Designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 33.86", Compressed Overall Length: 42.44", Extended Length: 51.26", Extended Overall Length: 59.84", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131246)$210.00
PTO Driveline - Weasler Driveline 14006546ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 37.80", Compressed Overall Length: 46.70", Extended Length: 57.83", Extended Overall Length: 63.73", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131248)$226.00
PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103167, Ref: C690F)$76.00
PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 191020, Ref: C680F)$73.00
PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 3/8 inch male, 6-Spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103168, Ref: C660F)$64.00
PTO Overide Clutch - Override coupler for converting 1 1/8 inch female to 1 3/8 inch male, (has 1 1/8 inch female at one end and 1 3/8 inch male at the other end) 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103169, Ref: C670F)$51.00
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$258.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 5/8 inch round bore with keyway. (Item #: 183772, Ref: B6691)$57.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 3/4 inch round bore with 1/4 inch keyway. (Item #: 183766, Ref: B2711)$63.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183768, Ref: B2712)$51.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 1 inch round bore with keyway. (Item #: 183770, Ref: B2713)$50.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 3/4 inch round bore with keyway. (Item #: 183763, Ref: B2902)$53.00
PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183764, Ref: B2903)$48.00
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
