FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 285 Parts

Category: Wheels

[Categories] [All MF285 Parts] [All Massey Ferguson Models]

No
Picture
Bearing Cone - Inner bearing cone. For tractor models 30, MF1085, MF255, MF265, MF275, MF285, MF85, MF90, Super 90. (Item #: 118730, Ref: 701114M1) $11.90

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. For the following models: 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 122, 1250, 130, 133, 135, 140, 145, 148, 1500, 1505, 152, 155, 158, 165, 168, 175, 178, 1800, 1805, 185, 188, 230, 235, 240, 245, 25, 250, 255, 260, 2620, 2625, 2640, 265, 265 S (TR), 2680, 2720, 2725, 275, 285 (FR), 285 S (TR), 290, 298, 35, 35 Gas / 35 Petrol, 35X, 3610, 3630, 3650, 500, 550, 560, 565, 575, 590, 592, 595, 65, 675, 690, 698, 765, 825, 835. Replaces 828217V1, 180876M1, 82817M1, 353615X1, 353427X1, 353 427X1. (Item #: 182520, Ref: S.04352) $3.20

Cap - Hub Cap, front wheel, threaded outside 2-3/4 inch, with grease fitting. For front hubs with threaded recess. For tractors: MF250 with split rim 6.00 x 10, MF253 with 179MM high axle, MF270, MF282, MF283 except Brazil, MF290, MF360, MF375, MF383, MF390, MF398, MF399, MF670, MF690. Industrials: 20D fixed axle, 30E, 40E. For 1134, 1143, 1144, 1153, 1163, 1164, 1183. Replaces 882637M1, 882636M91 (Item #: 104975, Ref: 882637M1WF) $9.30

Front Hub Seal - Measuring 1.8720 inches inside diameter, 2.6840 inches outside diameter and 0.544 inches wide, this front hub seal is used on Massey Ferguson models: 135, 150, 165, 175, 180, 185, 205, 230, 235, 245, 255, 265, 285, 1080, 1085, 20C. Replaces OEM numbers VPJ2807, 18265, 833342M1, 897242M1, 1204-4915 (Item #: 111672, Ref: 833342M1) $6.30

Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 (Item #: 167680, Ref: FW55186) $135.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $112.00

Front Wheel Bearing Kit - Kit contains one each: 25590 (cone), 25520 (cup), LM67048 (cone), LM67010 (cup), 22322 (seal). Wheel Bearing Kit, for front wheels using 5-1/4 inch wide hubs 532781M91 on tractors: MF225 serial number 9A324146 and up, MF265 serial number 9A324139 and up, MF 275 serial number 9A324137 and up, MF285, MF1085 late production with fixed or adjustable axle, not for tricycle axle or hub using 9/16 inch National Fine Wheel Bolts. For 30, MF1085, MF255, MF265, MF275, MF285. (Item #: 102488, Ref: FW86) $36.10

Hub Cap - Threaded. Used with 532781M92 Front Wheel Hub. For tractor models 1080, 1085, 165, 175, 180, 185, 255, 265, 275, 285, 2200. 2 1/2 inch diameter on threaded end. (Item #: 104977, Ref: 191495M1) $7.20

Rear Spinout Rim Stop - For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751 (Item #: 152053, Ref: 1755060M1) $17.80

Rear Wheel Center - This Wheel Center is used with 1688674M91 Rim. Additional $20shipping due to weight. Replaces 1678718M1 (Item #: 178805, Ref: 1678718M1) $378.51

Rim 14x30 with 8 Loop - Rim, 14 inch x 30 inch de-mountable rim with 8 loop clamps. Add $30.00 extra shipping per rim due to weight. Replaces 1678716M91, 1688674M91, 1884726M91 (Item #: 178988, Ref: 1688674M91) $597.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 1751403M1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Wheel Bearing Kit - This front wheel bearing kit Includes 1 each: LM48548 (Cone), LM48510 (Cup), LM11949 (Cone), LM11910 (Cup), 18265 (Seal). For tractor models 1080, 1085, 135, 150, 165, 175, 180, 185, 202, 203, 204, 205, 20C, 230, 235, 245, 255, 265, 275, 285. Replaces 835965M91. (Item #: 102487, Ref: WBKMF2) $21.10

No
Picture
Wheel Bearing Kit - Kit contains 1 each of the following 25590 bearing, 25520 bearing cup, LM67048 bearing, LM67010 bearing cup, 22322 seal (lip type). For tractor models 1080, 165, 175, 180, 185, (202 serial number up to 306677), (203 serial number 65900300), (204 serial number up to 342537), (205 up to serial number 659100150), (2135 up to serial number 646992326), 255, 265, 275, 285, 40. (Item #: 102488, Ref: WBKMF3) $36.10

Wheel Bolt - This wheel bolt fits the following Massey Ferguson tractor models using the 532781M92 and 519278M91 hubs: 135, 165, 175, 180, 185, 230, 235, 245, 255, 265, 275, 285, 1080, 1085, 20, 20C, and 30. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1.5 inches. It has an overall length of 1.81 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1.12 inches. Head size is 7/8. Replaces part numbers: 15597A, 518611M91, 519278M91 and MP1584. (Item #: 108605, Ref: WB916) $2.30

Wheel Hub - For tractor models 1080, 1085, 165, 175, 180, 185, 255, 265, 275, 285. Uses WBKMF3 wheel bearing kit. (Item #: 104978, Ref: 532781M92) $85.90

$Massey Ferguson 285 Wheel Nut, 5\8 inch NF Special$
Wheel Nut, 5/8" NF Special - For Massey Ferguson tractor models 150, 165, 168, 175, 178, 180, 185, 188, 240, 250, 255, 265, 270, 271, 275, 282, 285, 290, 565, 575, Compatible with Massey Ferguson Construction and industrial models 30, 50C, 50D, 3165, Replaces Massey Ferguson OEM number 645735M2, 881162M1, 881162M2, 5/8" NF Special, Use With Bolt 108655, (Item #: 108654) $0.98

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A. For the following tractors: 135, 148, 165, 168, 175, 178, 20B, 20D, 20E, 2135, 230, 231, 240, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30D, 30E, 340, 342, 35, 350, 352, 355, 360, 375, 375E, 383, 390, 390E, 393, 398, 40, 550, 565, 575, 590, 65, 670, 675, 690, 765, MHMustang, MHPacer, MHPony, MH101JR, MH101SR, MH102JR, MH102SR, MH20, MH22, MH30, MH33, MH44, MH44 Special, MH44-6, MH444, MH81, MH82 (Item #: 111560, Ref: 512581M1) $1.60

Wheel Stud Nut - Nut is 9/16x18 inches For tractor models 135, 148, 150, 20, 202, 204, 205, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 265, 285, 30, 30D, 3165, 35, 50, 65, F40, FE135, FE35, TO35. May come in a silver metal color or as pictured. (Item #: 126617, Ref: 180004M1) $1.60

Universal Parts and Accessories
Category: Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Power Adjust Rim - Here is an 11 inch x 28 inch, 4-rail type Power Adjust Rim. For double ramp clamp. Holes for stop adjustment are drilled 90 degrees perpendicular to side of rim not 90 degrees to rail. Stop holes are angled. Uses differen1 stop bodies, screws and clamps, depending on the application. Fits tire size 12.4 inches x 28 inches, 13.6 inches x 28 inches. Verify OEM Part number before ordering. (Item #: 103777, Ref: C5NN1050H) $485.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $136.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $160.00

Rim 12X28 6 Clamp - This rim is 12 inch x 28 inch with 6 loop clamps. Loops are designed for 5/8 inch bolts. (Item #: 103720, Ref: R2068) $155.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $150.00

No
Picture
Small Tire Repair Kit - Kit includes: Spiral design augering probe, Chrome plated open eye insertion needle, 20 Permanent Repairs, 4 inches long with carbon black added to strengthen repairs and match the color of the tire, Tool Lube and Case, BJK20SC, (Item #: 112213) $41.80

Stop Body - Fits various tractors models with power adjust rims. Replaces part number C0NN1057A. (Item #: 122098, Ref: C0NN1057A) $18.00

Tire Inner Tube - This Tire Inner Tube is used with 4.00 x 12, 4.50 x 12 and 4.80 x 12 tires. Has a TR-13 valve stem. Valve height 1.38 inch, diameter 0.46 inch. (Item #: 118300, Ref: 400X12TB) $18.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

No
Picture
Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Item #: 185194, Ref: E844Q) $26.50

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 7.50 x 24, 8 x 24, 8.3 x 24, 9 x 24, 9.5 x 24. (Item #: 178959, Ref: WHS060) $36.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00

No
Picture
Tire Tube 34 and 36 Inch - This tire tube is used for all tractors with the following tires: 10.00 x 34, 11.00 x 34, 11.2 x 34, 12.00 x 34, 12.4 x 34, 10.00 x 36, 11.00 x 36, 11.2 x 36, and 12.4 x 36. (Item #: 178888, Ref: WHS063) $79.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for radial tires. (Item #: 183819, Ref: WHS064) $80.00

Tire Valve Fluid Adapter - For ballast. (Item #: 182502, Ref: S.61167) $13.40

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire, Three Rib - Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118215, Ref: 650X16) $122.01

Tire, Three Rib - Front Tire, 3 Rib, 6.00 inches x 16 inches. Designed to be used with tube (part number WHS050). 4 Ply. Additional $25 shipping due to size and weight. (Item #: 118214, Ref: 600X16) $111.00

Tire, Three Rib - Front Tire, 3 Rib, 5.00 inches x 15 inches. Designed to be used with tube (part number 500X15TB). 6 Ply. (Item #: 118362, Ref: 500X15) $103.00

Wheel Rim Lug - Welded onto blank rear rims. Used on Tractors with Standard Rims. (Item #: 178744, Ref: NPN1050A) $18.80

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Wheels

[Categories] [All MF285 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy