Air Cleaner Grommet - 3-3/16" O.D., 1-7/8" I.D.. For tractor models Super 55, Super 66, 66, 550, 660, 770, 880, White 2-44. (Item #: 126376, Ref: 101291A)$14.00
Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Oliver and White tractors, it is used on the following carburetors: TSX49, TSX120, TSX138, TSX168, TSX181, TSX186, TSX221, TSX363, TSX374, TSX380, TSX384, TSX397, TSX399, TSX405, TSX418, TSX477, TSX581, TSX603, TSX610, TSX665, TSX738, TSX755, TSX791, TSX807, TSX811, TSX868, TSX880, TSX903, USX29, USX32, USX32-1. These carburetors are possible on the following models 2-44, 2-70, 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 99, Super 99, Super 44, Super 55, Super 66, 440, 550, 900, 950, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, OC-4, OC-9, OC-12. Replaces 1H7610, H7610 (Item #: 126116, Ref: CT29-81)$5.10
Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 77, 88HC, Super 88, 770, Super 77, 880, 1550, Industrials using Continental FG226 Engine. Replaces Marvel-Schebler numbers TSX181, TSX374, TSX610, TSX755, TSX903, TSX499, TSX397, TSX755, TSX903, TSXU835, TSXU836. Center to center on the 2 mounting bolts is 2 3/8 inches. Made in USA, 1 year warranty. (Item #: 100749, Ref: 14991)$560.00
No Picture
Carburetor - Zenith carburetor outperforms the original carbs used on: 77, 88HC, Super 88, 770, Super 77, 880, 1550, Industrials using Continental FG226 Engine. This new Zenith carburetor replaces obsolete Zenith 1629, 12259 and 14981 model carburetors (wider bolt pattern than the Marvel). Center to center on the 2 mounting bolts is 2 9/16 inches. Made in USA, 1 year warranty. (Item #: 14981)$745.20
Carburetor Float - Fits Marvel TSX374, TSX610, TSX633, TSX713, TSX755, TSX775, TSX811 large bowl carbs. For tractor models Super 77, 88, Super 88, 550, 660, 770, 880.KS7605 (Item #: 105095, Ref: R2383)$18.10
No Picture
Carburetor Kit, Basic - Marvel-Schebler "Viton", includes gaskets, float valve and throttle shaft. For tractor models 550, 560, 770, 88, 880 all with Marvel-Schebler Carb. #s TSX374, TSX755, TSX811. (Item #: 113822, Ref: MSCK03)$34.00
Carburetor Kit, Basic - Kit for Marvel TSX903, TSX775, TSX374, TSX181, TSX221, TSX610, TSX755 carbs used on 1550, 1555, 550, 66, 660, 77, 88, 880, Super 77, Super 88. (Item #: 100734, Ref: MS102)$15.60
Carburetor Kit, Basic - Kit for Zenith 8543, 9739, 12259 carbs used on 70, 770, 880. Oliver part number 101605AS (Item #: 100742, Ref: Z105)$19.98
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX755, TSX374. For the following tractor models: 770, 880. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203357, Ref: 1920-CARB)$255.01
Fuel Filler Grommett - (BLACK) 2 7/16" I.D. - 3 5/8" O.D.. Replaces Oliver OEM# 100619A and 72162460 and 30-3209865. For tractor models Super 55, Super 66, Super 77, Super 88 (DSLs) 550, 660, 770, 880, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2255. Replaces White OEM# 100619A and 72162460 and 30-3209865. For tractor models WHITE 2-78 and 4-78. (Item #: 113652, Ref: R4805)$20.00
Fuel Filter - The fuel filter measures 3 7/16 inches diameter, 2 3/4 inches tall. Comes with two large and one small rubber seal rings. Replaces A51346, A37187, A39109, G45288, 45288, 3602788R91, 309991, C3TZ9365B, 86546599, 309531, C3TA9176A, C3TZ9155B, C3TA9155B, 1021350M91, 1021351M1, 835944M91, 1596257M91, 1021351M3, A35668, 70000-14632, 7000014632 (Item #: 159728, Ref: 309991)$23.00
Fuel Filter, Final - Fuel Filter for tractor models 550, 660, 770, 880, 1600, 1650 up to serial number 187586, 1550, 1555. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. All with Diesel Engines. Replaces 609689AS, 159044AS, 159044AS, 20-7100980, 20-7100980 243190601, 163953AS. (Item #: 158868, Ref: CAV7111296)$7.50
Fuel Filter, Primary - For tractor models 550, 770, 880, 990, 995, 1550, 1600, 1650, 1800, 1850, 1900, 1950. For tractors with the Roosa-Master injection system. (Item #: 126008, Ref: 156289AS)$15.00
Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166)$7.10
Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 1J-5304, 1J5304. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061)$2.60
Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following models:60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, Super 99, Super 44, Super 55, Super 66, 440, 550, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950T, 2050, 2150. Replaces IJ5301 and IJA-5301. (Item #: 105382, Ref: 9N9162)$3.20
No Picture
Fuel Tank Grommet - For tractor models 550, 660, 770, 880. (Item #: 113652, Ref: 100619A)$20.00
Intake Manifold - For gas Models: 88, Super 88, 880.Gaskets NOT included. (Item #: 101654, Ref: 190241B)$109.98
Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: Super 77 (late), 88, Super 88, 660 (late), 770, 880, 90, 99, 550 (late), 1550, 1555, 1600. (Item #: 179751, Ref: C3NN9D532A)$6.40
Pre Cleaner Assembly - Air Pre-Cleaner Assembly with a 2 inch base inner diameter and a 5 1/2 inch bowl. Fits models 1250, 550, 660, 77, 770, 880, OC-4, OC-6, Super 55, Super 77. Replaces 101579AS. (Item #: 186846, Ref: 101579AS)$84.00
Precleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractor models 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1855 gas only, 1900, 1950, White 2-70. Can replace Donaldson Bowl part number P02-0227. Replaces 101965A. (Item #: 157279, Ref: R28794)$8.90
Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models (OC4 Gas/Diesel, some), OC6, Super 55, Super 77, 1250, 660, 77, 770, 880, 550 (Diesel, Fits some). It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Item #: 186846, Ref: B9NN9A660A)$84.00
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 1BS-5307A, 1J-5307 (Item #: 105364, Ref: 49923D)$3.40
Universal Parts and Accessories Category: Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231)$12.60
Carburetor Elbow and Strainer - Fits some Oliver and Cockshutt models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553)$5.50
Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72)$19.30
No Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49)$15.80
Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500)$120.00
Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043)$70.00
Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259)$113.00
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949)$9.92
Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494)$5.30
Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003)$13.30
Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622)$55.00
Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397)$21.50
Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A)$33.00
Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23)$94.68
Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5)$137.82
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R)$3.90
Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP)$11.80
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
