FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Oliver 1550 Parts

Category: Steering

[Categories] [All 1550 Parts] [All Oliver Models]

Char-Lynn, Oliver Power Steering Conversion Kit - For Oliver tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1800, 1850, 1900, 1950, 2050, 2150, Used to convert Saginaw to Char-Lynn (5.9ci motor), Motor requires 4 gpm (minimum) to 8 gpm (maximum), Priority Flow Divider recommended to supply motor with 4 gpm (not included), Pump and hoses not included, (Item #: 111645) $1750.00

Sector Shaft Retainer - For Oliver tractor models 1550 (s/n 160000-later), 1555 (s/n 160000-later), 1650 (s/n 147569-later), 1655 (s/n 147569-later), 1755 (s/n 220000-later), 1855 (s/n 220000-later), 1955 (s/n 220000-later), 2255 (s/n 235650-later) Replaces Oliver OEM number 72160297, , Compatible with White tractor models 2-62 (s/n 160000-later), 2-70, 2-85, 2-88, 2-105, 2-110, 2-135, 2-155, 60 American, 80 American, 100, 120, 125, 140, 145, Compatible with White Construction and industrial models 2-78, 4-78, Replaces White OEM number 30-3045641, (Item #: 166922) $35.50

Spindle - For Oliver tractor models 770, 880, 1550, 1600, 1650, Vertical Length: 13-3/8", Shaft Diameter: 1-5/8", Spline Diameter: 1-5/8", Seal Diameter: 2.188", Inner Bearing Diameter: 1.625", Outer Bearing Diameter: 1.250", (Item #: 120118) $217.75

Spindle Thrust Washer - For Oliver tractor models 77, 88, 770, 880, 1550, 1555, 1600 (s/n 147569 - later), 1655 (s/n 147569 - later), 1750 (s/n 180537 - 201090), 1850 (s/n 150421 - 169758), Replaces Oliver OEM number K727, (Item #: 115285) $10.90

$Oliver 1550 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 16.250", B= 1.50", C= 1.625", D= 1.250". For tractor models 1550, 1555, 77, 770, 88, 880, (1600, 1655 SN# 147569 and up), (1850 SN# 150421 to 169758), (1750 SN# 180537 to 201090). Replaces KS713A, 161341A. The wheel bearing kit used on this spindle is kit part number WBKWH4. (Item #: 102697, Ref: 161340A) $255.00

$Oliver 1550 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 12.125", B= 1.50", C= 1.625", D= 1.250". For tractor models (1550, 1555 utility), (1650, 1655 utility SN# 147569), (White 2-62 utility), (White 2-78, 4-78, G750 all utility SN# 147569 and up). The wheel bearing kit used on this spindle is kit part number WBKWH4. (Item #: 105271, Ref: 107282A) $260.00

Steering Arm - Center, Used - For Oliver tractor models 1550, 1555, 1600, 1650, 1750, 1755, 1800, 1850, 1855, 1950, 1950T, 1955, Replaces Oliver OEM number 161424A, Splines: 10, Tie rod Hole: Top - .740" and Bottom .640", Same arm as 102716 except the tapered tie rod holes are drilled in the opposite direction, For a new version of this item use Item #: 102715, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402715) $198.01

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .640 inch, bottom tie rod hole is .750 inch. From center of splined hole to a line between the center of tie rod holes is 5.25 inches. For tractor models (1550, 1555, 1650 all with adjustable axles), (1600 with adj. axles SN# 124420 and up), (1655 adj axles narrow tread SN# 147569 and up), (1750 adj. axles narrow tread SN# 180537 and up), (1755, 1855 adj. axles marrow tread SN# 220000 and up), (1800 adj. axles SN# 115377 and up), (1850 adj. axles SN# 150421 to 168127), (White 2-62 with adj. axles SN# 160000 to 168915). (Item #: 105235, Ref: 107010A) $277.00

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .740 inch, bottom tie rod hole is .640 inch. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, (1850 regular tread SN# 168128 and up), 1855, 1950, 1950T, (1955 with 10 spline shaft). (Item #: 102715, Ref: 161424A) $363.00

Steering Arm, Center - This is the same as 161424A except tapered holes are drilled from opposite direction, .640" dia at top of hole and .740" dia at bottom of hole. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555, 1955 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, 1850, 1855, 1950, 1950T. (Item #: 102716, Ref: 161424SPL) $392.00

Steering Arm, Center - 6 spline center hole, for use with small tie rods and 72160341 shaft. For tractor models (1550, 1555 regular tread SN# 160000 and up), (1650, 1655 row crop SN# 147569 and up), (1755 regular tread SN# 220000 and up), (1855, 1955 row crop SN# 220000 and up), (White 2-105 SN# 255216 to 271913), (2255 SN# 235650 and up), (White 2-62 regular tread SN# 160000 and up), White 2-70, (White 2-78 row crop SN# 147569 and up), (White 2-85 SN# 263341 to 271719), (White 4-78 row crop SN# 147569 and up). (Item #: 105239, Ref: 303089991) $291.00

Steering Shaft - 9.160" long, 10 spline. For tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, (White 2-62, White 2-78, White 4-78 all industrial). Replaces 155800A, 107009A. (Item #: 105229, Ref: 303110311) $175.00

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

$Oliver 1550 Steering Wheel 11\16 Hub$
Steering Wheel 11/16 Hub - 15" diameter, 11/16" splined shaft, dished, covered spokes. Measure splined shaft before ordering, there is a 13/16 splined shaft also part number 30-3051951. For tractor models (550 late), 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150. Also replaces 159082A. (Item #: 110018, Ref: 159082A) $70.00

$Oliver 1550 Steering Wheel 13\16 Hub$
Steering Wheel 13/16 Hub - 15" Diameter - 13/16" x 36 Splined Hub - 4 1/2" Deep - 3 Covered Spokes. Measure splined shaft before ordering, there is 11/16 also available part number 159082A. Replaces 1142487, 71142487, and 30-3051951. (Item #: 110017, Ref: 30-3051951) $64.00

Steering Wheel Cap - Black Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101472, Ref: 101431AA) $45.40

Steering Wheel Cap - Black Face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150 (Item #: 101474, Ref: 101432AA) $41.30

Steering Wheel Cap - White Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101471, Ref: 101431A) $41.64

Steering Wheel Cap - White face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101473, Ref: 101432A) $39.30

Steering Wheel, Keyed Hub - 3 spoke (covered). 18" diameter, 7/8" - 13/16" tapered shaft. For tractor models Super 55, 550, Super 66, 66, 660, (late 70 SN# 243686 and up), 77, 770, late 80, 88, 880, Super 77, Super 88, 1550 Rowcrop, 1555 Rowcrop, White 2-62, 1600, 1650 and 1800 (with manual steering), 99 and Super 99 (replaces 4 spoke wheel with 3 spoke). (Item #: 101468, Ref: 1B767C) $51.00

Tie Rod Tube - A= 19.56 inch, B= 11/16 inch inside diameter, 18 right hand thread. For tractor models 1550, 1555, 1650, 1655, White 2-62, White 2-78, White 4-78. (Item #: 172501, Ref: K6958A) $29.90

Tie Rod, Long - A= 18.625", B= .750". For tractor models 1550, 1555, 1650, 1655, 1800, 1900, White 2-62, White 2-78, White 4-78, 770, 880. (Item #: 108172, Ref: 106673AS) $62.00

Tie Rod, Short - A= 3.50", 11/16" diameter, 18 RH thread. For tractor models 1550, 1555, 1650, 1655, 1755, (1800 row crop SN# 90525 to 115376 and wheatland SN# 90525 and up), 1855, (1900 wheatland SN# 90525 and up), 1955, White 2-62, White 2-78, White 4-78, (60 row crop SN# 600001 and up), (770, 880 row crop). Replaces KS1160. (Item #: 108171, Ref: 107291AS) $25.90

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.30

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1550 Parts] [All Oliver Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy