Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford 9N, 2N & 8N Discussion Forum
:

Hey Mike A

Welcome Guest, Log in or Register
Author 
Ron/PA

08-08-2004 07:42:40




Report to Moderator

In response to your question yesterday, here is a site with all your diagrams. You never said which ignition you have, but both styles are here.
Good luck, I'm thinkin yer gonna need it. Ron




[Log in to Reply]   [No Email]
Ron/PA

08-08-2004 13:15:14




Report to Moderator
 Sad Facts in reply to Ron/PA, 08-08-2004 07:42:40  
We've chased a few of the best away from this board. Clause is gone and I can't even find his webpage anymore. Don B isn't here any longer. We've lost the best of the best.
I'm lucky, I've got a couple of these types around my area, and they are always ready to lend me a hand. Unless they're in the field. All I know is If I talked to any one of these guys the way the folks on here are talked to, I'd get a swat on the head with a tire iron. If Mike had the nerve to talk to me, in person the way he talked to Dell, I'd either give or get a beating.
Nuff said
Ron

[Log in to Reply]  [No Email]
DON TX

08-08-2004 15:15:55




Report to Moderator
 Re: Sad Facts in reply to Ron/PA, 08-08-2004 13:15:14  
Well, we all know what the A stands for now! The Grant bunch may be the best explanation yet. don b, & Clause still post here, and even Dave Smith <'((>< posted a week or so ago. Again, post are read with a tone, if it sounds bad then read it again in a different tone. Usually it sounds better the second time. That's what I do. HTH
DON TX



[Log in to Reply]  [No Email]
Jeb2N

08-08-2004 13:03:25




Report to Moderator
 Re: Hey Mike A in reply to Ron/PA, 08-08-2004 07:42:40  
AS far as responses go, If someone asks a question, I will answer it if I can. That's why the board is here. Even if there is a possibility that they are 'trolling', then i'll still answer it because someone else might benefit from it, and I'll give that person the benefit of the doubt.

Jeb



[Log in to Reply]  [No Email]
Rob

08-08-2004 08:02:18




Report to Moderator
 Not likely he needs 12v. He was baiting Dell. in reply to Ron/PA, 08-08-2004 07:42:40  
Mike not even have a tractor.

Mike is the same fellah who posted the libelous joke.

Mike posts under even more nics, attacking Dell, on this board and other boards.

Mike is totally dishonest so you should just dismiss his questions as insincere.

Mike does what he can to tick-off Dell with libelous jokes, inappropriate comments about Dell and his ex, profane names, and then complains the gruff Dell is 'mean.' I've seen this same stuff many times on this board. Mike is a snake and you should take your hoe after him, not offer him help.

Between you and me, Mikeis a craphead and you should ignore him. His type won't hang long unless they get attention.

That is most likely Mike's problem you know, Dell gets attention the craphead craves but can't get on his own merit. His type tears down the people around so he can feel better than those people. He can't do it by improving himself so he runs down everyone else.

[Log in to Reply]  [No Email]
H kutzler

08-08-2004 15:16:14




Report to Moderator
 Re: Not likely he needs 12v. He was baiting Dell. in reply to Rob, 08-08-2004 08:02:18  
I think Dell is playing it smart as he is not responding. Maybe if nobody responded to mike in the future he would go away as he is sick and this is the only he can get attention



[Log in to Reply]  [No Email]
CargoCult

08-08-2004 08:35:41




Report to Moderator
 Re: Not likely he needs 12v. He was baiting Dell. in reply to Rob, 08-08-2004 08:02:18  
third party image

Maybe Mike is one of the Gang at Dave's place. They are doing their Annual Grant's Mountain get-together this weekend. Nothing wrong with having fun, but let's leave Dell alone, OK? He is really an asset to this board! Answers several questions every day, some the same ones! Cut him some slack!!

[Log in to Reply]  [No Email]
Rob

08-08-2004 08:51:15




Report to Moderator
 Re: Not likely he needs 12v. He was baiting Dell. in reply to CargoCult, 08-08-2004 08:35:41  
That's interesting. I imagine you're on to something.

As for slack...I don't know about that!

My dad was a grouch and someone needed to call him now and then. I would and we would both get over it. People are people ya' know. We got along better after I started calling him when he was a jerk, actually. I don't feel sorry for Dell, he's who he is and he's got broad shoulders...although I'm not sure they are his most 'broad' feature these days...teasing Dell...just teasing.

Now Mike, well he's way over the line and says more about Mikie than he does about Dell. My experience is that the bunch Mike is in with will trash someone for some reason after they get done with Dell and Kim. This is about Mike, not Dell.

[Log in to Reply]  [No Email]
cargocult again

08-08-2004 09:29:56




Report to Moderator
 Re: Not likely he needs 12v. He was baiting Dell. in reply to Rob, 08-08-2004 08:51:15  
third party image

This sort of activity was taking place several years ago. Always will , in a free society. Alternative=Censorship, which is bad!! Kim seems to have deleted the post that started this whole thing,which will cause other folks to wonder what we are talking about! You should have been here back during the "Tractor Wars"..was pure mayhem back then! I have nothing against folks having fun, but let's keep it relatively benign. Dell does not deserve the harassment. He is asset to this board, and we don't wanna see him run off!!! My opinion only!!!

[Log in to Reply]  [No Email]
Rob

08-08-2004 09:51:42




Report to Moderator
 Re: Not likely he needs 12v. He was baiting Dell. in reply to cargocult again, 08-08-2004 09:29:56  
Oh, I was here when that bunch ran off to make another board. Was that the 'tractor wars' or was there another blow-up? Oh, it doesn't matter. I got my say in, maybe it's best to let it drop. Those fellahs have heard from me long before now anyway.



[Log in to Reply]  [No Email]
cargocult again

08-08-2004 10:27:06




Report to Moderator
 Re: Not likely he needs 12v. He was baiting Dell. in reply to Rob, 08-08-2004 09:51:42  
third party image

Way before then!! Several years, in fact! Many years too many! They ran off a few good folks.



[Log in to Reply]  [No Email]
Rob

08-08-2004 10:42:29




Report to Moderator
 Reoccurring mess, huh? in reply to cargocult again, 08-08-2004 10:27:06  
You mentioned a gettogether. I wonder if Mikie traveled and got on someone elses puter to spew his crap?
Probably afraid he would get his ip address banned but not worried if one of his comrades' ip was banned.
I hope he didn't screw over someone.



[Log in to Reply]  [No Email]
Bob

08-08-2004 10:47:49




Report to Moderator
 Re: Reoccurring mess, huh? in reply to Rob, 08-08-2004 10:42:29  
Check out the bashing I got over on the Ford board for clarifying coil connections.



[Log in to Reply]  [No Email]
txblu

08-09-2004 12:33:00




Report to Moderator
 Re: Reoccurring mess, huh? in reply to Bob, 08-08-2004 10:47:49  
Bob,

Great job in your "bashed post". I was around the electron tube era and heard about/read/studied/used proper polarity in cathode/heater terminals.

Never thought about spark plugs, but you are exactly correct in your analysis about thermonic emission of the center electrode.

You handled your basher very well. Can't say I'd have the intestinal fortitude to do that.

I too was wondering what the Mike A thing was all about so I typed the handle in the archives and found the 12v conversion conversation on 8/7. Now I know what went on.

When a person asks for help and then refuses to do what is offered (for whatever reason), one has to ask why the post in the first place?

Mark

Mark

[Log in to Reply]  [No Email]
Lucas

08-08-2004 15:25:17




Report to Moderator
 Re: Coil polarity in reply to Bob, 08-08-2004 10:47:49  
Bob, very nice explanation of the coil polarity theory. I was an automotive teacher at a tech. center for over 20 years, and your theory is dead on. As you said, just check it out on a scope. I usually would see approx. 5000 more volts to fire the same plugs if the polarity was wrong.
It's nice to see someone with knowledge reply on this board.
Thanks again.
Lucas



[Log in to Reply]  [No Email]
Bob

08-08-2004 16:17:22




Report to Moderator
 Re: Coil polarity in reply to Lucas, 08-08-2004 15:25:17  
Lucas,

Thanks for the "vote of confidence".



[Log in to Reply]  [No Email]
Rob

08-08-2004 11:22:36




Report to Moderator
 Re: Reoccurring mess, huh? in reply to Bob, 08-08-2004 10:47:49  
That was nice...not.

Well you know guys have good days and then they have bad days. Some more than others. You get close to people you'll notice only the most very sweet people don't ever show up grouchy. Rare indeed.

All and all, this board is tame to lame, as boards go.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy