Re: Ok I'm done. I need one of you wiring gurus

Posted by DANWV on July 30, 2004 at 07:47:31 from (24.159.165.144):

In Reply to: Ok I'm done. I need one of you wiring gurus posted by DANWV on July 29, 2004 at 21:28:18:

I have cleaned and polished all the connection that are on every wire on that tractor. When I put the battery on a 4amp charger it only takes an hour or two to charge it up to full capacity. the battery is not that old and it reads 6.19v to 6.26v when I just checked it this morning.
I did notice one thing this morning, when I started the tractor and went to check the voltage, at the battery, with my digital volt meter, it would not read anything! The lcd screen on the meter just lite up with every symbol that it had on it. Does that make sense to anyone?
It acted like it confused the meter.
Oh and by the way I fixed the wires on the generator that were crossed before I put the new regulator on the tractor. So I don't think I have a bad regulator.
Could it be possible that there is a wire shorting out somewhere on the frame of the tractor causing the meter to act like that?

Follow Ups:

• Re: Ok I'm done. I need one of you wiring gurus Bob 08:22:41 07/30/04 (1)
  • Re: Ok I'm done. I need one of you wiring gurus DANWV 08:49:00 07/30/04 (0)
• Re: Ok I'm done. I need one of you wiring gurus john *.?-!.* cub owner 08:21:55 07/30/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]