Posted by Doug Curtis on February 15, 1998 at 07:47:02:
In Reply to: Re: Farmall A Engine to Super C engine posted by Rick B on February 15, 1998 at 04:37:31:
: : I have A 1946 Farmall A can I turn this engine into a super C engine by changing sleeves and pistons I am looking for some more power is this
: : all I need to do or if I can at all are the cam's
: : or head different?help!!!
: The lower sleeve bore in a C113 block is smaller than a C123 block. There may be overbore kits available to increase your stock bore to 3 1/8", but C123 sleeves will not fit. If you need a new cam, get one for a C135, but if yours is good, run it. The head for the C123 has slightly larger valves, but again, if you can grind your seats and have a good head, run it. Semi dome pistons will help raise compresion/hp, but be prepared to go to 12volt start/charge system.
I'm also wanting to swap a farmall A engine with
a Super C ( put the A engine on the C ), will it
work ? bolt up etc. Other than horsepower it looks
like the same engine. I really need some advice on
this. Thanks,Doug Curtis