Posted by Mike on March 02, 1998 at 16:36:52:
In Reply to: Dead TEA20 posted by Mike Smith on March 01, 1998 at 21:55:34:
: Have a dead TEA20!
: Have repalced plugs,points,cond.,coil,reg..
: Cpmpression between 90-80 on all valves.
: Replaced clutch while machine was down.
: Rebuilt carb.
: Motor tries to fire (pops on a couple of cyls) when starter is engaged. When starter is not engaged it stops firing.
: Could it simply be the starter switch?
: Am pretty frustrated at this point. Any tips?
Sounds like maybe your plug wires are mixed up. Check the firing order and make sure the wires are on the dist cap right. Firing order is probably 1-3-4-2, but it could also be 1-2-4-3.