Posted by Don K. on March 23, 1998 at 04:56:13:
In Reply to: Tractor paint posted by Craig Duff on March 20, 1998 at 06:10:50:
I would recommend sandblasting your parts to get rid of the rust and have bare metal. Next I would use a 2 part epoxy primer to fill pits and seal the metal. If you're going to get it to showroom condition then use Basecoat Clearcoat, if it's going to be worked, use Acrilic enamel with hardener. The hardener will resist gas, oil and help keep the paint from chipping.