Belt - Fan - For Allis Chalmers tractor models 180, 185, 190 (s/n 2G-05728), 190XT (s/n 2G-05728), Replaces Allis Chalmers OEM number 243021, Replaces OEM number 70243021, Replaces Massey Ferguson OEM number 767141M1, Color: Black, Length: 53.25", Material: Polyester Cord, Thickness: 0.4, Type: REC (Raw Edge Cogged), Width: 1/2", (Item #: 197004)$9.90
Brakes
No Picture
Actuating Drum Assembly, Used - For Allis Chalmers tractor models D19, 190, 190XT, Compatible with Allis Chalmers Harvester(s) 880 Replaces Allis Chalmers OEM number 70235603, , Compatible with Gleaner Combine(s) C, F2 (s/n 588-36201), F3 (s/n 588-36201), G (s/n 17001-earlier), Replaces Gleaner OEM nos 70235603, For a new version of this item use Item #: 173470, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437600)$84.01
No Picture
Brake Backing Plate, Used - For Allis Chalmers tractor models D19, 190, 190XT, Replaces Allis Chalmers OEM nos 70235607, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454139)$151.01
Brake Band - Sold individually, 4 required per tractor. For tractor models 170, 175, 180, 185, 190, 190XT, 190XT III, (200 serial number less than 4000), (D17 serial number 42001 and above), D19, D21. Also replaces 70276940, 70235610, 70277438. (Item #: 105398, Ref: 70277379)$32.00
Brake Band Hardware Kit - Compatible with Allis Chalmers Tractor(s) D17 (s/n 42001-Later), D19, D21, 170, 175, 180, 185, 190, 190XT, 200 (s/n 4000-earlier). Replaces Allis Chalmers OEM Number(s) 70235616, 70918448, 70235615, 70235614. Recommended 2 kits per side of tractor. Kit Contains: Inner Link, Outer Link, Pin, and Cotter Pin. (Item #: 1039432)$13.00
Brake Band Return Spring - For Allis Chalmers tractor models D19, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70250446, 0.063" Wire Diameter, 0.369" to 0.497" O.D., 1.293" O/A Length, (Item #: 164313)$6.60
Brake Drum - Also replaces 70235603. For tractor models 880 Cotton Picker, D19, 190 serial number before 21700, 190XT before serial number 21700. (Item #: 173470, Ref: 70277329)$149.00
Brake Lining - Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Prior to serial number 21699. For 190, 190XT, D19, F, F2, L. 70252562, 70277200. (Item #: 105400, Ref: 70235628)$29.00
Brake Shoe Spring - Diameter of wire is 0.088 of an inch, outside diameter is 0.525-0.666 of an inch, and has an overall length of 1.389 inches. 4 used per tractor, sold individually. For the following models: D17 (serial number 42001 and up), D19, D21, 170, 175, 180, 185, 190, 190XT, 200 (up to serial number 4000). Replaces 235609, 250435, and 70250435. (Item #: 162368, Ref: G48508)$8.50
Clutch Hub, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70235678, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442347)$120.01
Clutch Release Throw Out Bearing - Greaseable - Compatible with Allis Chalmers Construction & Industrial(s) HD3, HD4. Compatible with Allis Chalmers Tractor(s) B, C, CA, D10, D12, D14, D15, D17, D19, 180, 185, 190, 190XT, 200. Replaces Allis Chalmers OEM nos 70235079 (Item #: 113482)$20.60
Power Director Clutch Plate - Used on Allis Chalmers D15, D17, D19, D21, 170, 175 below serial number 5461, 180 below serial number 12800, 185 below serial number 12800, 190, 190XT, 190XT Series III, 200, and 7000. Replaces OEM numbers 70257672, 70261212 (Item #: 151816, Ref: 70261212)$45.00
Pressure Plate Assembly, Remanufactured, 70255689 - For Allis Chalmers tractor models 190XT, 200, Replaces Allis Chalmers OEM number 70255689, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, Flywheel Step: 1.437", Cast Center I.D.: 7", For 4 pad clutch disc use Item #: 206315, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206373)$156.00
No Picture
PTO Clutch Separator Plate - This PTO Clutch Separator Plate is for tractor models (180, 185 all use 6), (190, 190XT, 190XT III, 200 all use 8), (4W-220, 7045, 7060, 7080, 7580, 8050, 8070 all use 5), (4W-305, 8550 both use 7), (7000 use 3), (7010, 7020, 7030, 7040, 7050, 8010, 8030 all use 4). (Item #: 172652, Ref: 70265486)$28.60
Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Item #: 107007, Ref: N1087)$18.00
No Picture
Transmission Disc, 12", 4-Botton, Spring Loaded - For Allis Chalmers tractor models 180, 185, 190, 190XT (With 7" Hub), 200, 7000, Replaces Allis Chalmers OEM number 70247071, 70261029, Hub: 7", Spline Count: 10, Spline Diameter: 1.250", For a Remanufactured version of this sku use Item #: 206313, (Item #: 172878)$192.20
Cooling System
Cooling Fan - 5 Blade, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, Replaces Allis Chalmers OEM number 70255751, Blades: 5, 18.500" Diameter, 1.500" Pilot Hole, Mounting Holes on 2" Centers, For a new version of this item use Item #: 162267, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 462267)$100.01
Fan Blade, 5 Blade - 18-1/2 inches in diameter, 1-1/2 inch pilot hole, mounting holes on 2 inch centers. For tractor models 180, 185, 190, 190XT. (Item #: 162267, Ref: 70255751)$167.00
Gasket - Thermostat, 74025101, Gleaner, 74025101 - For Allis Chalmers tractor models D21, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Compatible with Allis Chalmers Construction and industrial models TL345B, TL545, Compatible with Allis Chalmers Engine (s) 649 (diesel) Replaces Allis Chalmers OEM number 74025101, 71364767, 74007956, , Compatible with Gleaner Combine (s) F, F2, F3, G, K2, L, L2, L3, M, M2, M3, N5, N6, Replaces Gleaner OEM number 74025101, 71364767, 74007956, Thermostat Housing to Block, (Item #: 158245)$3.40
Oil Cooler - Core size 6 inches high, 19.75 inches wide. For tractor models (185 up to serial number 14553), 190, 190XT, 200, 210, 220. (Item #: 124408, Ref: 70272180)$385.00
Radiator - Fits 190, 190XT, 190XT III. Core size: 23.00 inches wide, 18.25 inches high, 5 rows of tubes 7 Fins per Inch. (Item #: 101885, Ref: 70250729)$663.00
Radiator Cap - Allis Chalmers, 228545, 228722, A39359, A45176, G45179 - For Allis Chalmers tractor models B (s/n 61221-later), C (s/n 18580-later), CA, D10, D12, D14, D15, D17, D19, D21, G, WC (s/n 74430-later), WD, WD45, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Compatible with Allis Chalmers Construction and industrial models H3, HD3, I40, I60, I400, I600 Replaces Allis Chalmers OEM number 70228545, 70228722, 70228817, 70254891, , Compatible with Case Construction and industrial models W3, 210B, 310, 320, 430, 430CK, 480, 480B, 480C, 480CK, 530, 530CK, 545, 580, 580B, 580BCK, 580C, 580CK, 584, 584C, 585, 585C, 586, 586C, Replaces Case OEM number A39359, A45176, G45179, Chrome Plated, 2.239" Inner cap I.D, 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area, 4 PSI (for pressurized systems), (Item #: 113099)$27.00
Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Item #: 110011, Ref: 70254891)$6.40
Radiator Hose Lower - This lower radiator hose has an inside diameter at one end of 2 1/8 inches and an inside diameter at 1 3/4 inches. For 180, 185, 190, 190XT (Item #: 114557, Ref: 70248233)$15.70
Radiator Hose, Lower - A = 1.690 inches, B = 2.125 inches. For tractor models (190 serial number up to 14449), 190XT, (190XT III serial number up to 14450). (Item #: 114556, Ref: 70243015)$14.40
Radiator Hose Upper - Our new upper radiator hose has an an inside diameter of 1.75 inches on the smaller side and 2.12 inches on the larger side. For tractor models 180, 185, 190, 190XT, (Item #: 114555, Ref: 70243014)$17.20
Thermostat - For tractor models 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, (D17 serial number 119938 and up), (D19 diesel), D21. Replaces 74025103. (Item #: 113939, Ref: EAF8575BWG)$14.90
Water Pump - Water Pump for gas or diesel engines, with hub and inlet and outlet gaskets, (o-ring for early models not included). This pump is for tractors with a steel line that screws into pump housing with 7/8 inch 18 thread. For 180, 185, 190, 190XT, D21. (Item #: 100039, Ref: 74007554)$94.00
Water Pump O-Ring - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70923971, For water pump use 100040, (Item #: 153397)$2.00
Decal Set - HOOD Decal Set for Allis Chalmers Model 190XT. (Item #: 183191, Ref: R4034)$62.00
No Picture
Decal Set - COMPLETE Decal Set for Allis Chalmers Model "One-Ninety XT" only. Creme background with Black lettering. If you are ordering for a Diesel, you need to add 2 pieces of R0670. (Item #: 100211, Ref: R2624)$210.00
No Picture
Diesel Decal - Individual decal, black lettering on creme. For tractor models 160, 170, 180, 190, 190XT, 210, 220. (Item #: 183252, Ref: R0670)$10.10
Bearing Cup - Rear axle outer cup, Timken number 29620. For tractor models 190, 190XT, D17. (Item #: 112126, Ref: 70057005)$15.80
Bearing Cup - Rear axle inner cup, Timken number 3920. For tractor models 190, 190XT, D17. (Item #: 116984, Ref: 70202584)$18.70
Coupling - For 180, 185, 190, 190XT, 200. Coupling can be used with 70246529 Gear. (Item #: 163405, Ref: 70261442)$112.00
Gear Collar, 3rd and 4th - 15 outer teeth, 12 inner teeth, .838 inch wide. For tractor models 190XT, 190XT III, (200 serial number 4001 and up). (Item #: 172449, Ref: 70257033)$117.00
Gear Shift Lever Pins - These Standard Gear Shift Lever Pins are 0.325 inches wide on the square end and 0.250 inch round pin diameter. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 203465, 70203465. Price is for two. (Item #: 153119, Ref: 70203465)$12.20
Gear Shift Lever Pins, Oversize - These OVERSIZE Gear Shift Lever Pins are 0.375" wide on the square end and 0.285" round pin diameter. They are used to tighten up worn shift lever and must be ground to fit the existing worn lever. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 218859, 70218859 Price is for two. (Item #: 180156, Ref: 70218859)$15.90
Gear Shift Lever Pins - Pair - For Allis Chalmers tractor models B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70203465, 203465, Pin Measures 0.325" Wide Square End, 0.285" Round Pin Diameter, Used to "tighten up" worn shift lever., Must be ground to fit existing worn lever., Sold in pairs, For Standard Size Pins use Item #: 153119, (Item #: 129236)$16.30
Reverse Shift Fork, Used - For Allis Chalmers tractor models 180 (s/n 12800-earlier), 185, 190 (s/n 9001-later), 190XT (s/n 9001-later), 200, Replaces Allis Chalmers OEM nos 70246554, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432522)$147.01
Second Gear - For tractor models 180, 185, 190, 190XT, 200. Second Gear. (Item #: 163408, Ref: 70246531)$224.00
Shift Fork, 3rd And 4th - This new 3rd And 4th Shift Fork fits Allis Chalmers 180, 185, (190 and 190XT (serial number 9001 and up), 200; Replaces: 246556, 261385, 70261385 (Item #: 125699, Ref: 70261385)$104.00
Third Gear - For tractor models 180, 185, 190, 190XT, 200. Third Gear. (Item #: 163407, Ref: 70246529)$184.00
Third Gear Transmission Countershaft - For tractor models 180, 185, 200, (190, 190XT serial number above 9001). (Item #: 112374, Ref: 70246543)$154.00
Transmission Input Shaft - For tractor models 180, 185, 200, 190XT, (190 serial number 9001 and up). Transmission Input Shaft. (Item #: 165427, Ref: 70256571)$179.00
No Picture
Transmission Main Splined Collar - For 180, 185, 200, (190, 190XT serial number 9001 and up). Transmission Main Splined Collar. (Item #: 172588, Ref: 70246532)$117.00
Electrical System
Alternator - New Alternator 12 volt, 61 Amp. For 160, 190, 190XT, D21 (Item #: 113606, Ref: 1100883)$123.00
Alternator with Tach Drive - This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. NOTE, for Allis Chalmers application, the tach drive needs to be replaced with part number 720046764 to have the correct gear ratio. Use part number ADR9209 to make this a single wire self exciting alternator (not included). Replaces 02453306, 90048463 (Item #: 164228, Ref: ADR0382)$127.00
No Picture
Condenser - For Allis Chalmers tractor models 170, 175, 180, 185, 190, 190XT, Compatible with International tractor models 454, 464, 544, 574, 674, Compatible with John Deere tractor models 1010, 2010, 2020, 2510, 3010, 3020, 4000, 4010, 4020, 4230, Compatible with Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 175, 180, 205, 255, 265, 285, 1100, 2135, 2200, 3165, Compatible with Massey Ferguson Construction and industrial models 20, 40, 202, 203, 204, 302, 304, 2200, 2220, 3165 Replaces Massey Ferguson OEM number 1024924M91, , Compatible with Minneapolis Moline tractor models G900, G950, G1000, G1050, G1350, G1355, Jet Star 3, M670, U302, Compatible with Oliver tractor models 1600, 1800, 1900, Replaces Case IH OEM number 702325R91, All models listed with Delco distributors with screw held cap, (Item #: 173747)$4.60
Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325)$18.00
No Picture
Distributor, Rebuilt - Complete remanufactured distributor for 190 and 190 XT tractors with Delco Distributor 1111311, 74022922. A refundable $150.00 core charge will be added to your order. (Item #: 205105, Ref: 1111311)$265.01
Electronic Ignition Conversion Kit, 12 Volt Negative Ground - Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. For 12 Volt Negative Ground systems only. For Delco 1112624, 1112466, 1112682, 1112687. Tractor models D19, 180, 185, 190 and 190XT. (Item #: 105074, Ref: 1163A)$144.00
Fuse Holder - Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces 230246, 70230246 (Item #: 112273, Ref: 376852R91)$10.90
Key Switch - 5 terminal, 3 position, with keys. For tractor models 170, (D15 from serial number 9001 and up with Indak switch), (D17 from serial number 75001 and up), 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces 241965. (Item #: 128485, Ref: 233759)$16.60
Light Switch - For tractor models 160, 170, 175, 180, 185, 190, (190XT from serial number 19001 and up), 200, 210, 220, 6040. Replaces 70249142, 70249142V, 249142 (Item #: 113760, Ref: 249142)$15.50
Spark Plug Wire Set - 6 Cylinder - Carbon Core - 90 Degree Boots - For Allis Chalmers tractor models D19, 180, 185, 190, 190XT, Compatible with Ford tractor models 6000, Compatible with International tractor models 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2806, 2856, Compatible with John Deere tractor models 4010, 4020, Compatible with Massey Ferguson tractor models 1100, Compatible with Minneapolis Moline tractor models G705, G706, G707, G708, G900, G1000, GVI, Compatible with Oliver tractor models 70, 77, 88, 770, 880, 950, 1600, 1800, 2055, 2155, 2655, Fits 6 cylinder tractors, Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems, For use with agricultural and off-road vehicles, (Item #: 108071)$20.00
Starter - This new starter for Diesel models 180, 190, 190XT, 7000, 7010, 7020, 8010, and Gleaner models F, G, L, M. (Item #: 184754, Ref: 1113657NEW)$389.00
No Picture
Starter - For tractor models TL 545 Gas Loader 1965, D21 Gas 1967-68, 180 1964-72, 190 and 190XT both with Gas 1965. REBUILT Starter. 12 Volt. No exchange. Replaces 1108416. (Item #: 203449, Ref: 1107356)$350.86
Starter Assembly, Diesel Engine - New Lucas style 12V starter assembly with solenoid (Replaces 273902), for tractors: 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010. With diesel engines. (Item #: 113173, Ref: 70273901)$225.00
Starter Drive - For D17 with Diesel Engine serial number up to 38964, (F, G, L all combine with Diesel Engine), (180, 185, 190, 190XT all with Diesel Engine. Starter Drive. 10 Teeth. (Item #: 113469, Ref: 1941157)$31.00
No Picture
Starter, Rebuilt - For tractor models 180, 185, 190, 190XT all with diesel engines and Delco starter. Add $80.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203418, Ref: 1113657)$435.01
Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch, number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch and manifold heater switch. Replaces: 227029, 240962, 242988, 245866, 245936, 253322, 70253322, 71191589, 72160068. (Item #: 121141, Ref: R7994)$11.70
Voltage Regulator, 12 Volt - For tractor models D21, 190XT, 160, 170, 175, 180, 185, 190, 200. Replaces 1100822, 1100710. (Item #: 105289, Ref: 581710)$21.70
Engine Bearings
No Picture
Cam Bushing Set - For tractor models (6060, 6080 with D2200 diesel), (801 Cotton Picker, 860, 180, 185, 190, with 301 CID diesel 2800 series engine), (TL-345B, TL-545, 545, 190, 190XT, 190XT III, 200, 7000, with 301 CID diesel 2900 series engine), 7010, 7020, 8010. Replaces 74025025, 74025238. (Item #: 105994, Ref: CB2800)$54.00
Main Bearing Set, .010 Oversize - For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. 74062171 (Item #: 105990)$149.00
Main Bearing Set, .020 Oversize - For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. (Item #: 105991)$165.00
Main Bearing Set, .030 Oversize - For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. (Item #: 105992)$176.00
Main Bearing Set, Standard - For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. YTO MBK190XT. Replaces 74062170 (Item #: 105989, Ref: MBK190XT)$146.00
Power Director Clutch Plate, Used - For Allis Chalmers tractor models D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 7000, Replaces Allis Chalmers OEM number 70257672, 70261212, 7" O.D., 3.89" I.D., 32 Tooth, For a new version of this item use Item #: 151816, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436045)$30.01
Rod Bearing - Rod Bearing in .020. For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Sold individually. Replaces YTO CRK190XT-020. (Item #: 105982)$14.10
Rod Bearing - Rod Bearing in standard. For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Sold individually. Replaces YTO CRK190XT-STD. (Item #: 105980)$16.60
Rod Bearings - Rod Bearing in .010. For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Sold individually. Replaces YTO CRK190XT-010. (Item #: 105981)$18.30
Rod Bearings - Rod Bearing in .030. For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Sold individually. Replaces YTO CRK190XT-030. (Item #: 105983)$15.30
Throw-Out Bearing Holder, Used - For Allis Chalmers tractor models D17, 180 (s/n 128000-earlier), 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70241874, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437589)$95.01
Engine Gaskets
No Picture
Conversion Gasket Set - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Construction and industrial models 345B, 545, 545B, 840B, 940, Compatible with Allis Chalmers Engine (s) D2800, D2900, 649, 649I, 649T Replaces Allis Chalmers OEM number 74009451, , Compatible with Gleaner Combine (s) F, F2, G, L, L2, L3, M, M2, M3, Includes crank seals, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 105996)$197.00
No Picture
Engine Overhaul Kit - Standard - For Allis Chalmers tractor models 190, 190XT, 200, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Construction and industrial models TL345B, TL545, 545, Kit Includes: Piston Liner Kit, Main Bearing Set, Connecting Rod Bearing, Connecting Rod Bushing, Camshaft Bearing Set, and Overhaul Gasket Set with Seals, Bore: 3 7/8" - Standard, (Item #: 173381)$1809.01
Front Crankshaft Seal - This Front Crankshaft / Timing Cover Seal, is used on Allis Chalmers D2200, 2800 and 2900 Series Diesel Engines. It has a 3.005 inch outside diameter, 0.312 inch width and is for a 1.875 inch shaft size. It replaces Chicago Rawhide CR18823; National 473239 Allis Chalmers 74024561, 74024561V (Item #: 106001, Ref: 74024561)$33.00
Head Gasket - For Allis Chalmers G2500, G2800, D2800, D2900 Engines. Tractor models 180, 190, 190XT, 185, 200, 7000, 7010, 7020 and 8010. (Item #: 168317, Ref: 74007790)$85.00
Head Gasket Set - For tractor models 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series Engine. All with 301 CID 6 cylinder. (Upper gasket set with head gasket). (Item #: 105998, Ref: VGK6894D)$149.00
Head Gasket Set - For Allis Chalmers tractor models 180, 190, 190XT, Compatible with Allis Chalmers Construction and industrial models 545, Replaces Allis Chalmers OEM number 74008180, 70277058V, 4008180, 70277058, (Item #: 167806)$1019.01
Liner Sealing Ring Kit - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Harvester (s) 880, Compatible with Allis Chalmers Construction and industrial models I600, 345B, 545, 545B, 615, 650, 653, 840B, 940, Compatible with Allis Chalmers Engine (s) D2200, D2800, D2900, G2500, 433I, 433T, 649, 649I, 649T Replaces Allis Chalmers OEM number 74023827, 4023827, , Compatible with Gleaner Combine (s) F, F2, F3, G (s/n 17000-earlier), K2, L, L2, L3, M, M2, M3, Black o-ring: top groove, Red o-ring: bottom groove, (Item #: 128671)$21.90
Lower Gasket Set - No front or rear seal included For 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010 All with D301 6-Cylinder Diesel and D301T 6-Cylinder Turbo Diesel Engine (Item #: 185121, Ref: 51-5056)$270.00
Oil Pan Gasket - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Construction and industrial models 345B, 545, 545B, 840B, 940, Compatible with Allis Chalmers Engine (s) D2800, D2900, G2500, 649, 649I, 649T Replaces Allis Chalmers OEM number 74021022, , Compatible with Gleaner Combine (s) F, F2, G, L, L2, L3, M, M2, M3, Oil Pan Gasket Only, (Item #: 106000)$12.10
No Picture
Rear Crank Seal - Rear Crankshaft Seal. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7/8 inch standard bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For 170, 180, 185, 190, D17, D19, D21. (Item #: 179721, Ref: BS219)$64.00
No Picture
Rear Main Seal - For tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020 with 301 Diesel Engine. (Item #: 106002, Ref: SS64550)$45.00
Valve Cover Gasket - For tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020 with 301 Diesel Engine. Replaces original part numbers 74008074, 4008074. (Item #: 128626, Ref: 74008074)$18.50
Engine Rebuild Kits
Basic Overhaul Kit - Basic Engine Kit. For 301 CID 6 cylinder, 3-7/8 inch standard bore, 30 degree exhaust valve face angle. 2800 series engine, 2900 series diesel engine. Kit contains: sleeves, pistons and rings, pins and retainers, and gasket set. For tractor models 180, 185, 190, 190XT. (Item #: 130513, Ref: BEKA1190XT-LCB)$1229.01
Engine Parts
Camshaft - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Construction and industrial models 345B, 545, 545B, 840B, 940, Compatible with Allis Chalmers Engine (s) D2900, 649, 649I, 649T Replaces Allis Chalmers OEM number 74023915, , Compatible with Gleaner Combine (s) F, F2, G, L, L2, L3, M, M2, M3, Replaces Gleaner OEM number 74023915, Timing gear not included, (Item #: 160896)$360.00
Connecting Rod, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010, Replaces Allis Chalmers OEM nos 74007975, Replaces Casting nos 4020888, 4007878, 4020039, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430335)$50.01
No Picture
Countershaft Gear 3rd, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190, 190XT, Replaces Allis Chalmers OEM nos 70247728, 70240939, Teeth: 23, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437484)$256.01
No Picture
Crankshaft, Remanufactured, 4020345 - For Allis Chalmers tractor models 180, 185, 190XT, Replaces Casting number 4020345, 4022256, With 3-1/2" nose, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200017)$900.01
No Picture
Driven Gear, Used - For Allis Chalmers tractor models D17, WD, WD45, 170, 175, 190, 190XT, Replaces Allis Chalmers OEM nos 70232409, Teeth: 37, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437606)$165.01
No Picture
Flywheel Ring Gear - For Allis Chalmers tractor models 180, 190, 190XT, Replaces Allis Chalmers OEM number 74020211, 143 Teeth, (Item #: 164572)$123.00
No Picture
Flywheel Ring Gear - For Allis Chalmers tractor models 185, 190, 190XT, 200, 7000, 7010, 7020, 8010 Replaces Allis Chalmers OEM number 74023904, , Compatible with Gleaner Combine (s) F, F2, G, L, L2, L3, M, M2, M3, Replaces Gleaner OEM number 74023904, 114 Teeth, (Item #: 164573)$84.00
No Picture
Gear Mainshaft, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70246535, For a new version of this item use Item #: 163406, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437479)$110.01
No Picture
Intermediate Drive Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70231941, Teeth: 27, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454691)$134.01
Lifter - For tractor models 180, 185, (190, 190XT, 190XT III gas or diesel), 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7060, 7080, 7045, (7050 diesel). Replaces 74026699, 4026699, HC474026699 (Item #: 74026699_)$21.26
Lifter, Used - For Allis Chalmers tractor models D21, 4W-220, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Compatible with Allis Chalmers Harvester(s) 880, Compatible with Allis Chalmers Construction and industrial models I600, 7GB, 345B, 545, 545B, 615, 645B, 650, 653, 840B, 940, Compatible with Allis Chalmers Engine(s) D2200, D2800, D2900, D3400, D3500, D3700, D3750, G2500, 433I, 433T, 649, 649I, 649T, 670H, 670HI, 670I, 670T Replaces Allis Chalmers OEM number 74026699, , Compatible with Gleaner Combine(s) F, F2, F3, G (s/n 17000-earlier), K2, L, L2 (engine s/n 70-25867-later), L3, M, M2, M3, N5, N6, R5, R6, Replaces Gleaner OEM nos 74026699, For a new version of this item use Item #: 160907, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439716)$4.76
No Picture
Pinion Gear, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 180 (s/n 12800-earlier), 185 (s/n 12800-earlier), 190, 190XT, Replaces Allis Chalmers OEM nos 70227644, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437608)$89.01
Push Rod - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Construction and industrial models HD4, I600, 345B, 545, 545B, 615, 650, 653, 840B, 940, Replaces Allis Chalmers OEM number 74020185, 4020185, (Item #: 167567)$133.00
Push Rod, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 6060 (s/n 8001-earlier), 6070 (s/n 8001-earlier), 6080 (s/n 8001-earlier), 7000 (s/n 8001-earlier), 7010, 7020, 8010 (s/n 8001-earlier), Compatible with Allis Chalmers Harvester(s) 880 Replaces Allis Chalmers OEM number 74020185, , Compatible with Gleaner Combine(s) F (s/n 12201-earlier), F2, F3, G (s/n 17001-earlier), K2 (s/n 24201-27200), L (s/n 13000-earlier), M, MH2, MH3, Replaces Gleaner OEM nos 74020185, For a new version of this item use Item #: 167567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439715)$78.60
No Picture
Reverse Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190 (s/n 9001-earlier), 190XT (s/n 9001-earlier), Replaces Allis Chalmers OEM nos 70232530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437485)$189.01
Rocker Arm and Shaft Assembly, Used - For Allis Chalmers tractor models 180 (s/n 12800-earlier), 185, 190XT, 200, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Harvester(s) 860 Replaces Allis Chalmers OEM nos 74009186, 74025188, 74020143, , Compatible with Gleaner Combine(s) F (s/n 12201-earlier, 12201-32201), F2, F3, G, L (s/n 13000-earlier), L2 (s/n 13001-28000), L3 (s/n 13001-28000), M (& Hill Side s/n 15401-earlier), M2 (s/n 15401-25900), M3 (s/n 15401-25900), MH2 (& Hillside s/n 19901-25900), MH3 (& Hillside s/n 19901-25900), Includes: Rocker Arms, Shaft and Rocker Arm Bracket, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439758)$204.01
No Picture
Second Gear, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70246531, Teeth: 31 and 15, For a new version of this item use Item #: 163408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436331)$130.01
No Picture
Third Gear, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70246529, Teeth: 27 and 15, For a new version of this item use Item #: 163407, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436330)$106.01
Timing Gear Cover, Used - For Allis Chalmers tractor models 180 (s/n 12800-earlier), 185, 190, 190XT, 200, 6060, 6070, 6080, 7000 Replaces Allis Chalmers OEM nos 74023858, , Compatible with Gleaner Combine(s) L (s/n 13000-earlier), M, M (Hillside s/n 15401-earlier), Replaces Gleaner OEM nos 74023858, Replaces Casting nos 74023272, 74020099, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433556)$175.01
Transmission Input Shaft, Used - For Allis Chalmers tractor models 180 (s/n 12800-later), 185, 190 (s/n 9001-later), 190XT, 200, Replaces Allis Chalmers OEM number 70256571, 70256571V, Teeth: 21 - 19 - 15, For a new version of this item use Item #: 165427, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437458)$104.01
No Picture
Valve, Exhaust Set of 2 - This pair of exhaust valves is for models 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series engine. All with 301 CID 6 cylinder. Exhaust Valves Set of 2. 30 Degree face angle. Replaces 4023379 older 45 degree valves. Requires replacement of seats. (Item #: 128706, Ref: 74009936)$24.70
Valve, Intake - Intake valve for tractor models (180, 185, 190, all with 2800 Series Engine), (190XT, 200, 7000 with 2900 Series Diesel Engine), (7010, 7020, 8010, all with 649I-649T Series engine or 301 CID 6 cylinder). (Item #: 172655, Ref: 74023378)$21.00
Valve Lifter - For Allis Chalmers tractor models D21, 4W-220, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Compatible with Allis Chalmers Harvester (s) 880, Compatible with Allis Chalmers Construction and industrial models I600, 7GB, 345B, 545, 545B, 615, 645B, 650, 653, 840B, 940, Compatible with Allis Chalmers Engine (s) D2200, D2800, D2900, D3400, D3500, D3700, D3750, G2500, 433I, 433T, 649, 649I, 649T, 670H, 670HI, 670I, 670T Replaces Allis Chalmers OEM number 74026699, , Compatible with Gleaner Combine (s) F, F2, F3, G (s/n 17000-earlier), K2, L, L2 (engine s/n 70-25867-later), L3, M, M2, M3, N5, N6, R5, R6, Replaces Gleaner OEM number 74026699, (Item #: 160907)$19.10
No Picture
Valve Rotator, Used - For Allis Chalmers tractor models D21, 4W-220, 180, 185, 190, 190XT, 210, 220, 7030, 7040, 7045, 7050, 7080, 7580, 8030, 8050, 8070 Replaces Allis Chalmers OEM nos 74028644, , Compatible with Gleaner Combine(s) L, L3, M, MH2, N5, Replaces Gleaner OEM nos 74028644, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 451274)$7.01
No Picture
Valve Service Kit - For tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010. Contains: springs, guides, locks, (no valves). (Item #: VSKA301)$131.21
Engine Pistons and Sleeves
Pin Bushing - Piston Pin Bushing. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7/8 inch standard bore, 30 degree exhaust valve face angle. For tractor models 7010, 7020, 8010. For 180, 185, 190, 190XT, D21. (Item #: 128670, Ref: 74020049)$16.10
Piston and Sleeve Kit - This is a set of 6. For 200, 7000, both with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Piston and Sleeve Kit contains: sleeves, pistons, rings, pins and retainers for 3 7/8 inch standard bore. (Item #: PKA3010)$866.67
Engine Rings
Piston Rings - This is a ring set for one piston. It contains 3 Compression Rings at .094 inches and one Oil Ring at .188 inches. Order one set per piston. Replaces 4062157, 156408AS, AT14706, 74062157, 106571AS, 4062157, 156408AS, 106571AS. (Item #: 120676, Ref: 2C7174)$48.00
Exhaust System
Exhaust Elbow - For 190, 190XT, 200, Gleaners G, L2, M, M2. (Item #: 101492, Ref: R3207)$87.00
Exhaust Manifold, Diesel - For Diesels only on: G, L, L2, L3, M, M2, M3, 190XT, 200, 7000, 7010, 7020, 8010. Does not come with Gaskets. Gasket Set can be ordered separately as part number R0280G. Replaces OEM 74007652, 4007653, 74007653, 4007652. (Item #: 179172, Ref: R0280)$165.00
No Picture
Exhaust Manifold Gasket Set - Manifold Gasket Set for Diesel engine on models G, L, L2, L3, M, M2, M3, 190XT, 200, 7000, 7010, 7020, 8010. Used for the R0280 manifold (OEM 74007652). (Item #: 101487, Ref: R0280G)$32.00
Exhaust Manifold, Used - For Allis Chalmers tractor models 190, 190XT, 200, 7000, 7010, 7020, 8010 (all with D2900 Engine) Replaces Allis Chalmers OEM number 74007652, 74007653, , Compatible with Gleaner Combine(s) L, L2, L3, M2 (s/n 15401-25900), M3 (s/n 15401-25900), Length: 25", For a new version of this item use Item #: 101486, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401486)$74.01
Manifold - For diesel models: 190, 190XT, 200, 7000, 7010, 7020, 8010. Gaskets NOT included. (Item #: 101486, Ref: 74007652)$123.00
No Picture
Manifold - For 190, 190XT, 200, 7000, 7010, 7020, 8010 ALL with DIESEL ENGINE. Exhaust Manifold.Gasket Set is sold separately(P/N 0280G) (Item #: 101486, Ref: 74007652)$123.00
Muffler - Muffler, vertical, gas and non-turbo diesel. Serial number 19001 and up. For 190, 190XT. (Item #: 100054, Ref: 70250632)$111.00
Muffler - Vertical Exhaust Inlet. Inside diameter of the inlet is 3 inches, outside diameter of the outlet is also 3 inches. Overall length is 40 inches. For 190XT, Early 200, 210, 220 Diesel. OEM number, use R1756 clamp, use R1805 rain cap. (Item #: 100055, Ref: R1571)$76.00
Turbocharger - For tractor models 190XT, 200, 7010, 8010 all TO4B80 turbo models. (Item #: 100543, Ref: 74009171)$370.00
Fuel System / Air Intake
No Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching:13327. For the following tractor models: 190XT. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203234, Ref: 1136-CARB)$265.01
Fuel Cap - For models D21, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces: 241174, 243025, 254013, 262788, 70254013, 70262788. Includes gasket, 3.475 inch outside diameter, 2.505 inch tang to tang. (Item #: 124142, Ref: 70262788)$23.00
Fuel Injector, Remanufactured, 74036044 - For Allis Chalmers tractor models 190, 190XT, Compatible with Allis Chalmers Engine (s) D2900, Replaces Allis Chalmers OEM number 74036044, (Item #: 210782)$310.01
Fuel Injector Tube - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Construction and industrial models TL345B, TL545 Replaces Allis Chalmers OEM number 74009255, , Compatible with Gleaner Combine (s) F, F2, F3, G, K2, L, L2, M, M2, M3, Replaces Gleaner OEM number 74009255, (Item #: 155896)$35.00
No Picture
Fuel Injector Tube O-Ring - For Allis Chalmers tractor models 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010, Compatible with Allis Chalmers Harvester (s) 860, 880, Compatible with Allis Chalmers Construction and industrial models 345B, 545, 545B, 840B, 940, Compatible with Allis Chalmers Engine (s) D2800, D2900, 433I, 433T, 649, 649I, 649T Replaces Allis Chalmers OEM number 70928953, 70928953V, , Compatible with Gleaner Combine (s) F, F2, F3, K2, L, L2, L3, M, M2, M3, MH3, Replaces Gleaner OEM number 928953, (Item #: 185614)$2.10
No Picture
Fuel Sending Unit - For tractor models 190, 190XT, 190XT III, D21. Replaces 70239788. (Item #: 119773, Ref: 70276224)$53.00
Precleaner Bowl - Clear plastic pre-cleaner bowl, for air intake on diesel models D2900, 649T prior to serial number 12201. (A) Bowl outside diameter at top: 10-1/2 inches. (B) Cone inside diameter at top: 5-9/16 inches. (C) Bowl side height: 3 inches. (D) Overall height: 4 inches. Large bowl 10-1/2 inch diameter, for 3 to 4 inch. For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, D21, G, L, L2, M, M2. (Item #: 107972, Ref: 70651270)$9.80
Sediment Bowl Assembly - Large bowl, single inlet type. Used on; (D15 Gas serial number 9001 and up and All Diesel using 2.315 Long Glass Bowl), (D17 Gas serial number 42001 and up and all Diesel using 2.315 Long Glass Bowl), (D19 Gas serial number 12001 and up and all Diesel using 2.315 Long Glass Bowl), (D21, WD45, 170, 175, 180, 185 all 2.315 Long Glass Bowl), (U Gas only using 2.315 Long Glass Bowl and single outlet ), (UC Gas only using 2.315 Long Glass Bowl and single outlet), (190, 190XT Gas, Diesel. Using 2.315 Long Glass Bowl). Fittings are 3/8 inch pipe inlet, 1/8 inch pipe outlet, 2.315 inch tall glass bowl. Replacement bowl available as part S.65504. Replaces: 237946 and 70237946. (Item #: 105393, Ref: S.61581)$20.00
Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: D15 Gas (SN: 9001 and up), and all diesel, D17 Gas (SN: 42001 and up) and all diesel, D19 Gas (SN: 12001 and up) and all diesel, D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT. Replaces 70237947V, 237947. (Item #: 105365, Ref: S.65504)$6.10
Sediment Bowl Bail with Brass Nut - For Allis Chalmers tractor models D15 (gas, s/n 9001-later), D17 (gas, s/n 42001-later), D19 (gas, s/n 12001-later), D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT Replaces Allis Chalmers OEM number 70223248, 223248, , Compatible with Case tractor models C, L (gas, 1939-earlier), LA (gas, s/n 4600027-earlier), LI (gas, 1939-earlier), 400, 410, 411, 412, 700, 730CK, 800, 840, Compatible with Case Construction and industrial models W5, W5A, W7, W8, W9, W10, 500, 680CK Replaces Case OEM number A11206, A11207, , Compatible with CockShutt / CO OP tractor models E3, E4, 20, 30, 40, 50, 540, 550 Replaces CockShutt / CO OP OEM number T07088, 12084G, , Compatible with International tractor models A, B, C, F12, F14, F20, F30, H, HV, Hydro 70, I4, I6, I9, OS4, OS6, Super C, Super M, Super MTA, Super W4, Super W6, Super W9, TD6 (s/n 29964-earlier), W12, W30, W40, 10-20, 15-30 (s/n 45513-later), 22-36, 100, 130, 140, 200, 230, 300, 340, 350, 400, 450, 460, 504, 560, 606, 656, 660, 666, 766, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 500 Replaces International OEM number 17564D, , Compatible with John Deere tractor models A (Styled and Unstyled), AI, AI (Styled and Unstyled), ANH (Styled and Unstyled), AO (Styled and Unstyled), AR, AR (Styled and Unstyled), AW, AW (Styled and Unstyled), B, B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Styled and Unstyled), BR (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G, G (Styled and Unstyled), GH, GH (Styled and Unstyled), GM, GM (Styled and Unstyled), GN, GN (Styled and Unstyled), GW, GW (Styled and Unstyled), H, HNH, HWH, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2010, 4030, 4230, Compatible with John Deere Combine (s) 45, 55, 95, 105, 3300, 4400, 6600, 6602, 7700 Replaces John Deere OEM number AA517R, , Compatible with Massey Ferguson tractor models Super 90 (s/n 888673-earlier), 50 (s/n 536843-later), 65, 85 (s/n 807752-later), 135, 150, 165, 175, 180, Compatible with Massey Ferguson Construction and industrial models 20, 30, 50, 202, 204, 302 (s/n 119701046-later), 304 (s/n 119751024-later), 356, 2135, 3165 Replaces Massey Ferguson OEM number 505472M91, 1018079M91, , Compatible with Massey Harris tractor models Colt, Mustang, 20, 22, 30, 44, 55, 81, 82, 101, 102, 303, 333, 555 Replaces Massey Harris OEM number 12084G, , Compatible with Minneapolis Moline tractor models G, G707, G708, GB, GTA, GTB, GTC, R (s/n 404800-earlier), RTN (s/n 404800-earlier), RTU (s/n 404800-earlier), U (s/n 544001-later), U, UB, UB (Special), UDLX, UT (s/n 317400), UT, UTS (s/n 317400), UTS, Z (s/n 571686-earlier), ZAS (late, s/n 701911-later), ZB (late), ZBE (late), ZBN (late), ZBU (late), ZTU (s/n 611511-earlier), Compatible with Oliver tractor models Super 66, Super 99, 60, 66, 70, 80, 90, 99, 660, 950, Compatible with Oliver Construction and industrial models HG, OC3, Replaces Oliver OEM number BS5305A, CS5305A, Replaces White OEM number 1BS-5305A, O.D. 2-1/8", Length 2.970", (Item #: 126520)$10.00
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Item #: 105364, Ref: 49923D)$3.40
Throttle, Traction Booster, Hydraulic and PTO Levers Knob - Plastic Knob, 3/8 inch fine thread. For tractor models 190, 190XT, 200, 210, 220. Diameter of knob may vary. (Item #: 126604, Ref: R4572)$6.00
Gauges
Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. Replaces 70254407, 254407 (Item #: 187035, Ref: ACS1833)$30.00
Dash Light with 12V Bulb - Used on the following Allis Chamlers models: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Item #: 105311, Ref: 70234404)$32.00
Dash Warning Light - Know when you oil pressure is low with this Dash Warning Light. This is a 12 - volt light with red dome. It is 2.191 inches over all length, with 0.675 inch outside diameter threads. 2 Spade Terminals. Used on Allis Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces part numbers 240837, 240838, 240869, 276390, 70240837, 70240838, 70240869, 70276390 (Item #: 182846, Ref: 240837)$27.30
Fuel Gauge - Just like the original, this fuel gauge is used on Allis Chamlers 190, 190XT, 200, 210, 220. Replaces 252368 (Item #: 190682, Ref: 70252368)$107.14
Oil Pressure Switch - Know if you lose oil pressure when it happens. This switch is used with 240837 Dash Warning Light. This switch is used on Allis Chalmers models: D21, 180, 185, 190, 190XT, 200, 210, 220, 4W305, 7000, 7030, 7040, 7050, 7060, 7080. Replaces Allis Chalmers part numbers 74020666, 74021445 (Item #: 162437, Ref: 74021445)$22.50
Proofmeter Drive Assembly - With Cover, 2 gears, 2 gaskets. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, D21 Has 12 and 45 teeth. Replaces original part numbers 246764, 70246764. (Item #: 128421, Ref: 720046764)$40.00
Tachometer - Tach drive runs off the alternator. For tractor models 180, 185, (190 from serial number 20600 and up), 190XT, 200, 210, 220. Replaces 252409, 255036, 70252409, 70255036. Uses 70256526 cable. Note, this part must be used with original tach drive assembly on the rear of altherenter, using 12 and 45 tooth gears, and a 3 inch OD alternator pulley, in order for this gauge to read property. (Item #: 110420, Ref: 70252409)$152.00
Tachometer Cable - 56 inch total length, threaded ends are 5/8-18 x 7/8-18, one Keyed and one Square end. For tractor models (D15 diesel), (D17 gas), (D21, 190, 190XT diesel with camshaft driven tachometer). Replaces 229751, 233639, 244107, 261607, 261609, 70229751, 70233639, 70244107, 70261607, 70261608. (Item #: 110181, Ref: AM3131T)$36.00
Tachometer Cable - Measuring 64.5 inches long with square ends. One end measures 5/8 with 18 threads, and one end measures 7/8 with 18 threads. For the following models: D21, 170, 175, 190, 190XT, 210, and 220. Used with 70252409 tachometer. Replaces 251791, 251792, and 256526, 70256526. (Item #: 167223, Ref: 70256526)$38.00
Tachometer Cable - For Allis Chalmers tractor models 180 (With alternator driven tachometer), 185 (With alternator driven tachometer), 190 (gas, With tachometer driven off camshaft), 190XT (gas, With tachometer driven off camshaft), 200 (With alternator driven tachometer), Replaces Allis Chalmers OEM number 243694, 70257353, 244110, 257353, Overall Length: 72-1/2", Mount to Mount: 71-1/2", Has Square Ends, 5/8 - 18 x 7/8 - 18 threads, (Item #: 158870)$39.00
Tachometer Gauge, Used - For Allis Chalmers tractor models 190, 190XT, Replaces Allis Chalmers OEM number 70252409, For a Remanufactured version of this part use Item #: 204160, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404160)$73.01
Temperature Sensor - Water - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, Replaces Allis Chalmers OEM number 70241249, (Item #: 162434)$11.10
Water Temperature Gauge - For Allis Chalmers tractor models 175, 180, 185, 190, 190XT (s/n 2695-later), 200, 210, 220, Replaces Allis Chalmers OEM number 70240989, (Item #: 162431)$53.00
No Picture
Water Temperature Gauge, Used - For Allis Chalmers tractor models 175, 180, 185, 190, 190XT (s/n 2695-later), 200, 210, 220, Replaces Allis Chalmers OEM number 70240989, For a new version of this item use Item #: 162431, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436302)$28.44
Hitch / Drawbar
Drawbar - 52.25 inches long, 2.50 inches wide, 1.250 inches high with holes at 1.720 inches, 4.331 inches, 5.692 inches, 8.332 inches from front. For tractor models 190, 190XT, 200, 7000, D19. Additional $30 shipping due to weight. (Item #: 110133, Ref: 70239813)$311.00
Lift Arm Latch Coupler Spring - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XT, Replaces Allis Chalmers OEM number 70235881, 70327360, 235881, 327360, Overall Length 3-1/4", (Item #: 126680)$6.70
Lift Link Clevis - Part is 7 3/4 inch overall length, 3/4 inch pin holes, 1 inch space in stirrup, and 1 1/8 inch threaded female end. For tractor models D17, 170, 175, 180, 185, 190, 190XT. (Item #: 108892, Ref: 70257726)$102.00
Sway Block - Left Hand, Used - For Allis Chalmers tractor models D19, 190, 190XT, 200, 7000, Replaces Allis Chalmers OEM nos 70241223, Replaces Casting nos AM5357, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437665)$57.01
Hydraulic Pump, Dual - For tractor models 200, 210, 220, (190XT, 190XT III diesel SN# 26612 and up), (190 gas SN# 26855 and up, diesel SN# 26857 and up). (Item #: 104236, Ref: 70257005)$1949.01
No Picture
Hydraulic Pump, Dual - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 210, 7000, Replaces Allis Chalmers OEM number 70260831, With standard and heavy duty front axle, Priority flow control hose connection out the side of the pump, Front hose connection has a #12 O-ring, Flow Rate: 4 GPM, Relief valve setting of the controlled flow section is 1, 700 psi, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 159049)$2259.01
Hydraulic Pump - Dual, Used - For Allis Chalmers tractor models 190 (Gas s/n 26855-earlier, Diesel s/n 26857-earlier), 190XT (Diesel s/n 26612-earlier), Replaces Allis Chalmers OEM number 70248736, For a new version of this item use Item #: 168909, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 455295)$1200.01
Hydraulic Pump Seal Kit - For Allis Chalmers tractor models D17, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6080, 7000, 7580, 8550, Replaces Allis Chalmers OEM number 70255947, For single stage pumps, (Item #: 167583)$167.00
No Picture
Hydraulic Pump, Triple - For tractor models 190 gas serial number less than 26855, diesel serial number less than 26857, 190XT diesel serial number less than 26612. (Item #: 104223, Ref: 70248735)$2499.01
Lights
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces 239804, 1164605, 70239804, 71164605 (Item #: 111242, Ref: 28A116)$14.70
Headlight Washer - Used with light part number 164089AS. For the following tractors: (170, 175, 180, 185, 190, 190XT all with flat top fenders), 200, 7000, 7030, 7040, 7050, 7060, 7080. (Item #: 154899, Ref: 504781M1)$5.40
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Used on Allis Chalmers Combines: A, C, E, EIII, F, K, L, L2, M, M2. Tractors : D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 5040, 5050, 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED)$33.00
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 230232, 70232232, 70276858, 70230232. (Item #: 111241, Ref: 373662R91)$9.10
Light ring - The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. For the following tractors D14 with serial number 19001 and up, D15, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7030, 7050. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Item #: 154743, Ref: 371449R91)$22.60
Light Switch - For tractor models (190, 190XT, 190XT III all serial number up to serial number 19000), D10, D12, D14, D15, D17. (Item #: 121149, Ref: 70234409)$8.20
Light Switch - Comes with knob. For tractor models D10, D12, D15, D17, D19, D21, 190, 190XT, 190XT III. Replaces 70235977, 70235976. (Item #: 114720, Ref: AA4667R)$16.60
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357)$18.70
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Item #: 150699, Ref: TLBULB12V)$0.50
Work Tail Light Assembly - 12 VOLT WOK LIGHT. For AC models: D10, D12, D14, D15, D17, D19, D21, 190, 190XT, 190XT III. (Item #: 124573, Ref: 70243313)$103.00
Miscellaneous
No Picture
Belt Pulley Cover, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70227672, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453971)$39.01
No Picture
Hydraulic Pump Bearing - For Allis Chalmers tractor models 190 (gas s/n 26855-earlier), 190 (diesel s/n 26857-earlier), 190XT (diesel s/n 26612-earlier), Replaces Allis Chalmers OEM number 70234692, Used to repair OEM 70248735 triple hydraulic pump, (Item #: 174270)$4.98
Hydraulic Oil Cooler, Used - For Allis Chalmers tractor models 185 (s/n 14553-earlier), 190, 190XT, 200, 210, 220, Replaces Allis Chalmers OEM number 70272180, Core Length: 19.750", Core Height: 6.000", For a new version of this item use Item #: 124408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 424408)$228.01
Oil Fill Breather Cap, NO Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Fits over 1-1/2 inch pipe. Replaces OEM numbers 203196, 205298, 200267. (Item #: 110064, Ref: R4459)$27.50
Oil Fill Elbow, Used - For Allis Chalmers tractor models D21, 180, 185, 190, 190XT, 200, 7000, 7010, 8010, Replaces Allis Chalmers OEM nos 74021498, Replaces Casting nos 4020512, 4025108, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449233)$60.01
Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Item #: 126591, Ref: C5NE6730B)$8.50
Oil Pan Drain Plug Washer - This washer is used with C5NE6730B Oil Drain Plug. (Item #: 140612, Ref: EBU6734A)$1.80
Paint
No Picture
Paint, Cream, 1 Gallon - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108324, Ref: TP270GAL)$65.00
No Picture
Paint, Cream, 1 Quart - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108323, Ref: TP270QT)$35.00
No Picture
Paint, Cream, Spray Can - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108322, Ref: TP270SP)$10.10
No Picture
Paint, Persian Orange #2, 1 Gallon - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108317, Ref: TP285GAL)$53.00
No Picture
Paint, Persian Orange #2, 1 Quart - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108316, Ref: TP285QT)$22.30
No Picture
Paint, Persian Orange #2, Spray Can - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108315, Ref: TP285SP)$8.40
PTO / Driveline
PTO and Lift Shaft Housing Seal - PTO Outer Seal for 1 speed, 1 3/8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779 (Item #: 128541, Ref: 70241779)$7.70
PTO Coupling-Shaft, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70229310, 70227579, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437456)$75.01
No Picture
PTO Shaft, Used - For Allis Chalmers tractor models 180 (s/n 12800-earlier), 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70256875, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437457)$385.01
Seats
Back Rest Cushion - Black & white vinyl covered backrest. 2" wood-backed heavy duty bonded foam. Includes mounting bolts. Made in the USA. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Item #: 101195, Ref: 70236460-OE)$76.00
Seat Back - Black and White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178464, Ref: R4357)$164.00
Seat Back - Black and White Vinyl on Wood For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Item #: 178469, Ref: R0853)$91.00
Seat Back - Black Vinyl on Steel For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. Replaces 70255581, 70255581-1 (Item #: 101203, Ref: 70255581)$230.00
Seat Back - Black and White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. YTO R4360 (Item #: 109277)$204.00
Seat Back - White Vinyl on Wood For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat (Item #: 115689, Ref: R0858)$202.00
Seat Back Cushion on Steel - White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. Replaces 70243517, 243517 (Item #: 115689, Ref: R0855)$202.00
Seat Back Cushion on Wood - Lower (wrap-around) arm rest cushion. On Wood. Used on Allis Chalmers 180, 190, 190XT, 200, 210, 220 using deluxe three cushion seat. Replaces 70243517, 243517 (Item #: 185753, Ref: 70243517)$124.00
Seat Back Cushion on Wood - This is the upper back cushion on a three cushion Seat. White Vinyl on Wood. Used on Used on Allis Chalmers 180, 190, 190XT, 200, 210, 220 using deluxe three cushion seat. Replaces 70243516, 243516, 70256765, 256765, 70256766, 256766 (Item #: 179800, Ref: 70256765)$25.70
Seat Back-MADE IN USA - Black and White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178461, Ref: R0851)$309.00
Seat Bottom - Black and White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178463, Ref: R0850)$315.00
Seat Bottom - Black and White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178465, Ref: R4356)$344.00
Seat Bottom - Black and White Vinyl on Wood. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Item #: 178471, Ref: R0852)$113.00
Seat Bottom - Black Vinyl on Steel For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030. Replaces 70256350, 70256350-1 (Item #: 101202, Ref: 70256350)$164.00
Seat Bottom - Black and White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat (Item #: 178443, Ref: R4359)$330.00
Seat Bottom - White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. Replaces 70243515 (Item #: 115690, Ref: R0854)$177.00
Seat Bottom - White Vinyl on Wood. For tractor models 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. (Item #: 115690, Ref: R0857)$177.00
Seat Bottom Cushion - This Seat Bottom Cushion Restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces 236461, 70236461 (Item #: 178946, Ref: 70236461-OE)$286.00
Seat Bottom Cushion, Wood Base - This is a high quality replacement for Allis Chalmers D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). It has a wood base. Not exactly like the original. Replaces 236461, 70236461 (Item #: 179372, Ref: 70236461W)$103.00
Seat Cushion Set - This Black and white vinyl two piece cushion set is steel backed. Consists of R4356, R4357 plus the Seat Frame. Original style pleated covering. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. Replaces: 236318 (Item #: 178950, Ref: R4358)$571.00
Seat Frame - Used with two cushions on Allis Chalmers models: 170, 175, 180, 185, 190, 190XT, 200, 220, 7030, 7050, D10, D12, D14, D15, D17, D19 (Item #: 134726, Ref: 70243740PAN)$219.00
Seat Shock Absorber - Compatible with Allis Chalmers Tractors: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580. Replaces Allis Chalmers OEM nos 70227917, 227916, 227917, 70227916. Includes Shock, Spring, Retainers, Collar and Bushings. 11-3/4 iches center to center when extended, 8-1/8 inches center to center when compressed. (Item #: 105315)$110.00
Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1)$2.30
Seat Upper Back - Black and White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. (Item #: 178445, Ref: R4361)$127.00
Seat Upper Back - White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat (Item #: 115692, Ref: R0856)$66.00
Seat, Upper Back - White vinyl on wood. For tractor models 180, 185, 190, 190XT, 200, 210, 220. (Item #: 185570, Ref: R0859)$31.00
Small Backrest - Small backrest custion complete. For 180, 190, 190XT using deluxe seat. For 180, 190, 190XT Replaces 243516, 70243516, A-70243516-4 (Item #: 179800, Ref: 243516)$25.70
Pivot Pin Assembly - Includes: 70916896 (7/8 inch NF slotted nut) and 70925721 (5/32 inch X 2 inch cotter pin). For tractor models (170, 175 gas with roll shift front axle), (180, 185, 190, 190XT, 200, D19 all with roll shift front axle), (D17 serial number 38136 and up with roll shift front axle). (Item #: 104301, Ref: 70235154)$67.00
Seal - Seal with wear sleeve for tractors with dual front wheels, except HD axle, serial number 42001 and up. For tractor models 160, 170, 175, 180, 190, 190XT, 200, 6060, 6070, 6080, 7000, D10, D12, D15, D17. (Item #: 164159, Ref: 70235120)$14.30
Seal Kit - For Allis Chalmers tractor models D21, 170, 175, 180 (s/n 12800-earlier), 185 (s/n 12800-earlier), 190, 190XT, 200, 440, 7020, 7030, 7040, 7045, 7050, 7060, 7080 Replaces Allis Chalmers OEM number 70239229, 70239192, , Compatible with Gleaner Combine (s) E3 (s/n 25001-later), F (s/n 12201-earlier), G (s/n 17001-earlier), K (s/n 24200-earlier), (Item #: 168995)$12.20
No Picture
Shaft With Pinion, Used - For Allis Chalmers tractor models 190, 190XT, Replaces Allis Chalmers OEM nos 70242596, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437487)$250.01
Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 110538, Ref: 70211743)$13.40
Spindle, LH/RH - This spindle measures A=14 inch, B=1.610 inch, C=1.625 inch, D=1.187 inch. For tractor models 180, 185, 190, 190XT, 200, D19. Uses wheel bearing kit part number WBKAC2. (Item #: 100094, Ref: 70262782)$163.00
No Picture
Spindle Support Knee, RH - For tractor models (180, 185 Hi clearance), (190, 190XT, 190XT III, 200 all std.). (Item #: 172653, Ref: 70257605)$353.98
Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 111696, Ref: 70218762)$6.40
No Picture
Steering Arm - Left Hand For D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200 (Item #: 100105, Ref: R2824)$120.00
Steering Arm, LH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Item #: 100105, Ref: 70245867)$120.00
Steering Arm, RH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Item #: 100106, Ref: 70245868)$120.00
Steering Arm - Right Hand, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70245868, (1.610 inches inside diameter), Right Hand, For a new version of this item use Item #: 100106, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497155)$83.01
Steering Wheel - 16 inch diameter, 7 inch dish. Fits 36 Splined 7/8 inch shaft for tractor models: 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. Uses cap part number 70246722. (Item #: 113315, Ref: 70256852)$64.00
Steering Wheel Cap - Use with 242933 steering wheel. For tractor models 170, 180, 185, (190 from serial number 2485), 190XT, 200, 210, 220, 440, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7045, 7060, 7080, 7580. (Item #: 71362581)$31.13
No Picture
Steering Wheel Cap - Clear cap with the AC Allis Chamers logo. Fits steering wheel part number 70256852. For tractor models 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. (Item #: 104210, Ref: 70246722)$22.00
Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51)$7.60
Tie Rod Assembly - Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For (D14, D15, D17, D19, WD, WD45 Fits these models if cut to length), (170, 175, 180, 185, 190XT, 200 fits these models with standard front end). (Item #: 100082, Ref: 70254660)$53.00
Tie Rod End, Female - 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Item #: 100083, Ref: 70254661)$24.90
Tie Rod Male - Tie rod end with tube, outer. For adjustable front axles. 16-1/2 inches to center of post. 0.812 inch diameter. 50 inch minimum thread, not for Hi-Clear. For 180, 185, 190, 190XT, 200, D17, D19. (Item #: 100084, Ref: 70254662)$29.00
Bar Clamp - Wheel clamp, disc to rim. For power shift rear wheels. Serial number 42001 and up. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 5045, 5050, 6060, 6070, 6080, 6140, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, D15, D17. Replaces 70235676 (Item #: 124526, Ref: 898021M1)$18.10
Eccentric Pin Block, Used - For Allis Chalmers tractor models CA, D10, D12, D14, D15, D17, WD, WD45, 160, 170, 175, 180, 185, 190, 190XT, 6040, 6060, 6070, 6080, 6140, Replaces Allis Chalmers OEM nos 70220032, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430928)$13.26
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 235727, 237405, 70235727, 70237405 (Item #: 103768, Ref: FW60166)$100.00
Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156)$109.00
Front Rim-Heavy Duty - Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Also replaces OEM # 70235086, 70248460. Fits Models: (D15 with serial number below 9001), (D17 with serial number below 75001), D19, ED40, 160, 170, 175, 180, 185, 190, 190XT, 6060, 6070. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D)$56.00
Front Wheel Bearing Kit - This is a complete Front Wheel Bearing Kit for 1 wheel, with a 6 bolt hub. Verify individual part numbers to ensure you are ordering the correct kit. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 500, 600, 6060, 6070, 6080, 615, 7000, (D15 serial number 9001 and up with 6 bolt hub), (D17 serial number 42001 with 6 bolt hub), D19, I60, I600. Kit contains one of the following 15250B, 15118, 26823, 26882, 70235120. (Item #: 100099, Ref: WBKAC2)$53.00
Front Wheel Hub Cap - Threaded Style, Used - For Allis Chalmers tractor models D15 (s/n 22414-later), D17, D19, WC (Use only with hub 70220404), WF (Use only with hub 70220404), 160, 170, 175 (s/n 7091-earlier), 180 (s/n 12800-earlier), 185, 190, 190XT, 200, 7000, Replaces Allis Chalmers OEM number 70220403, 70220403V, Threaded for 6 bolt hubs, For a new version of this item use Item #: 104560, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404560)$8.51
Front Wheel Lug Bolt - Used in many applications, this wheel stud has 1/2 inch - 20 NF thread, 1 inch thread length and 13/16 inch hex head. Used on Allis Chalmers 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, B, C, CA, D10, D12, D14, D15, D17, D19, G as rear rim lug bolt, WC, WD, WD45, WF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863. (Item #: 111560, Ref: 512581M1)$1.70
Power Adjust Rim Clamp - For Allis Chalmers tractor models D15, D17 (s/n 42001 - later), 160, 170 (with 28" rims), 175 (with 28" rims), 180 (with 28" and 30" Rims), 185 (with 28" and 30" Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28" and 34" Rims), 6070 (with 28" and 34" Rims), 6080 (with 28" and 34" Rims), 6140 (with 28" rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, Replaces Allis Chalmers OEM number 70235676, (Item #: 118628)$15.00
Power Adjust Rim Clamp, Used - For Allis Chalmers tractor models D15, D17 (s/n 42001 - later), 160, 170 (with 28" rims), 175 (with 28" rims), 180 (with 28" and 30" Rims), 185 (with 28" and 30" Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28" and 34" Rims), 6070 (with 28" and 34" Rims), 6080 (with 28" and 34" Rims), 6140 (with 28" rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, Replaces Allis Chalmers OEM number 70235676, For a new version of this item use Item #: 118628, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 418628)$10.01
Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A)$6.90
Wheel Hub - For use with threaded hub cap, 4.620 inch diameter pilot hole, 6.00 inch wheel bolt circle, replaces OEM number 236706. For tractor models 170, 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060 with 96 inch tread), 6070, 6080, 615, (7000 early), D15, D17, D19, 160, 1600. (Item #: 100102, Ref: 70261418)$65.00
Wheel Hub Cap - This is a threaded type front wheel hub cap for tractor models 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080, (7000 early), D15, D17, D19. (Item #: 104560, Ref: 70220403)$16.10
Universal Parts and Accessories Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127)$365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153)$100.55
Decals and Emblems
AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Item #: 183055, Ref: R4634)$14.20
AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Item #: 183122, Ref: R4633)$12.20
AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Item #: 183053, Ref: R4632)$10.10
AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Item #: 183049, Ref: R5234)$2.60
AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Item #: 100153, Ref: R0675)$3.80
AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Item #: 100154, Ref: R0676)$9.40
AC Logo Decal - 24 inches long, Black and Orange. (Item #: 183479, Ref: R0677)$28.00
AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Item #: 100163, Ref: R5168)$3.80
AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Item #: 100152, Ref: R5169)$10.20
AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Item #: 183047, Ref: R5233)$24.00
No Picture
Power Shift Decals - One pair, white. For the cab on some Allis models. (Item #: 183474, Ref: R0674)$28.00
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 and newer). Just call us at 800-853-2651.
NOTE
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209)$13.10
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209)$13.10
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302)$25.20
No Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010)$53.00
Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Item #: 105281, Ref: D4PE12029AA)$13.10
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6)$24.70
Spark Plug - Fits all models 1953 thru 1975 using 1/2" reach, 7/8" heck size. (Item #: 113918, Ref: AL3116)$4.90
No Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85)$5.50
NOTE
STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Item #: 182636, Ref: 1871662)$110.00
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6)$15.80
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12)$15.80
Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR)$10.60
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C)$76.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C)$103.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C)$123.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR)$167.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C)$147.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C)$170.00
Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR)$89.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114)$3.30
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134)$4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138)$2.80
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214)$4.58
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234)$8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300)$7.30
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312)$8.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400)$8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500)$14.30
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799)$10.10
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800)$8.80
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802)$11.10
Rain Cap - This rain cap is for a 2.75 inch pipe. (Item #: 108636, Ref: R1804)$11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807)$11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14)$14.30
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15)$18.38
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A)$6.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A)$7.50
Fuel System / Air Intake
Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553)$5.00
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949)$9.92
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R)$3.90
Gauges
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771)$59.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672)$41.00
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095)$14.90
Hitch / Drawbar
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X)$11.50
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2)$37.00
Hydraulic System
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317)$15.50
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$180.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215)$123.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH)$39.00
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311)$50.00
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H. Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH)$53.00
No Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP)$21.50
Lights
Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R)$16.60
Miscellaneous
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B)$245.00
Tractor Umbrella with Frame & Mounting Bracket - Orange - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161192)$119.70
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250)$24.00
No Picture
Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100109, Ref: TP280QT)$23.50
No Picture
Paint, Allis Orange, Spray Can - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100108, Ref: TP280SP)$7.90
No Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_)$8.50
No Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP)$8.50
No Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Item #: 108409, Ref: TP447GAL)$69.00
No Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT)$29.50
No Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT)$22.50
No Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP)$8.30
No Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL)$62.00
No Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT)$23.50
No Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT)$18.20
No Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP)$7.90
No Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL)$84.67
No Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL)$68.39
No Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Item #: BL116KIT)$99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$47.00
PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$176.91
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$282.00
Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V)$1518.86
Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056)$2161.57
Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V)$1518.86
Seat, Universal - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP)$100.00
Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012)$59.00
Sheet Metal / Body Parts
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140)$41.19
Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K)$178.00
Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417)$49.00
Tools
No Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891)$24.30
Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352)$3.20
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166)$70.00
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB)$17.15
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$47.00
Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16)$112.00
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050)$17.50
No Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059)$56.00
No Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058)$63.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061)$111.00
No Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062)$67.00
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
