FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers 5050 Tractor Parts

[Categories] [All Allis Chalmers Models] [Print]

Accessories / Supplies

No
Picture
Engine Block Heater - With 36mm Core Plug. For tractor models 5040, 5045, 5050. (Item #: 180769, Ref: S.70746) $75.00

Brakes

Brake Band - This Brake Band is 50mm wide. It is used on Allis Chalmers 5040, 5045, 5050. It replaces 31-2902130, 40 35 028, 5112676, 72093677 (Item #: 105813, Ref: TX12850) $56.00

Brake Band Assembly - For tractor models 5045, 5050. (Item #: 105813, Ref: 72094484) $56.00

Brake Lever, Right Hand - This is a Right Hand Brake Lever used on Allis Chalmers 5050. Replaces 72090644 (Item #: TX16900) $21.30

Clutch

No
Picture
Clutch Alignment Tool - 1-9/16" x 14 and 1" x 10 Spline, Pilot .667 - For Allis Chalmers tractor models 5040, 5045, 5050, 6060, 6070, Large Shaft 1-9/16", Spline: 14, Small Shaft: 1", Spline: 10, Pilot Diameter: 0.667", (Item #: 172149) $28.80

No
Picture
Clutch Disc - 11 Inch - 14 Spline, 1.563 inch hub, organic, solid. For tractor models 5040, 5045, 5050, 6060. (Item #: 172306, Ref: 72093924) $103.00

Clutch Finger Kit - This Clutch Finger Kit is for the Main Clutch (11 inch, 6 Finger). Fits most Fiat built tractors. Models 5040, 5045, 5050, 5060, 6060, 6070. Replaces OEM part numbers 9959900 and 9962518. (Item #: 185037, Ref: S.62177) $110.00

Clutch Kit - This new dual clutch kit contains a new 11 inch (280 mm) dual IPTO with 6 lever pressure plate assembly fitting a 9 or 12 bolt flywheel (1-9/16 inch x 14 spline captive disc), a 11 inch (280 mm), 10 spline, 0.984 inch (25 mm) hub, rigid woven PTO disc, new transmission release bearing, PTO release bearing and pilot bearing. Tractors: 5040, 5045, 5050, 6060, 6070. Replaces 30-3040917 31-2903290 31-2904633 47512408 5085402 5088627 5150646 5171137 72090947 72093472 72093675 72093676 72093910 72093924 72093925 72093988 72093989 72094411 72094422 72094463 72094502 72094512 79022018 84177325 84177326 (Item #: 122750, Ref: 5171137KT) $625.00

Clutch PTO Disc - Part number TX14989 is a new PTO clutch disc. It is used in in dual clutch configurations The rigid disc measures 11 inches with a 1 inch, 10 spline hub. Used on Allis Chalmers models 5040, 5045, 5050, 6060, 6070. This disc also has applications for Long and Fiat tractors. Replaces OEM numbers: TX14989, 128281, 328018616, 3280186161, 5106854, 5145715, 5152710, 5154703, 5154703, 72091671, 5101585, 5085404, 1LUA20. (Item #: 122055, Ref: TX14989) $82.00

Pressure Plate, 11 inch - 6 Lever, Cast Iron, Independent PTO, comes with Rigid Metallic Clutch Disc. Casting O.D. - 11 inches, Levers - 6, Springs - Belleville, Hub/Spline - 1-9/16 inches x 14, Flywheel Step - .079 inches. For tractor models (5040 8 and 12 speed), 5045, 5050, 6040, 6060, 6070. Replaces 72094463, 50 16 042, 5121198, 5145712, 5154879. (Item #: 122924, Ref: 5154879) $395.00

PTO Clutch Finger Kit - This PTO clutch finger kit has 90 degree fingers. (11 inch, 6 Finger). Fits most Fiat built tractors. Models 5040, 5045, 5050, 5060, 6060, 6070. Replaces OEM part number 9959899. (Item #: 179365, Ref: S.62178) $102.00

Cooling System

No
Picture
Fan - 4 Blade, 15 1/2 inch diameter. 1 1/8 inch pilot hole. 3 Bolt mount on 1 5/8 centers. . For tractor models 5040, 5045, 5050. Replaces 72089485 (Item #: 155454, Ref: 676700A) $45.81

Fan Belt - This Fan Belt measures 45.57 inches length and 0.453 inch width wedge belt. Direct replacement to A4897, A4897R, TX10276, 102752A, 303045080, 4796327, 4796328, 72090561, 72091544. For tractor models 5040, 5045, 5050. Please verify measurements before ordering (Item #: 168335, Ref: A4897R) $9.10

No
Picture
Radiator - Also replaces 72093205. For tractor models 5040, 5045, 5050. (Item #: 152250, Ref: 72090517) $348.00

Radiator Cap - 7 lb. For tractor models 5040, 5045, 5050, 6060, 6070, 6080, 8010, 8030, 8050, 8070. Replaces 72089869, 72090620. (Item #: 175936, Ref: 70263761) $8.10

Radiator Hose, Lower - 1.437 inch inside diameter. For tractor models 5040, 5045, 5050. (Item #: 124409, Ref: 72089314) $8.10

Radiator Hose, Upper - Our new upper radiator hose has an inside diameter of 1.750 inches. For tractor models 5040, 5045, 5050. (Item #: 124411, Ref: 72089692) $11.10

Thermostate Housing Gasket - This gasket is used with 72089651 thermostat housing. Replaces 153625460, 82982308, 4837222, 4599809, 76033370, 79055572, 4599809, TX10283, 18608447, 11511141 (Item #: 175890) $1.20

Thermostat Housing - Three bolt flange. For tractor models 5040, 5045, 5050. For Gasket, order 175890 (Item #: 173997, Ref: 72089651) $12.00

Water Pump - Less pulley. Comes with gasket. For tractor models 5040, 5045, 5050. Replaces casting numbers 2090472, 4784454, 4603862. Replaces TX10252, VPE1045, 11511010, 11511025, 312900665, 312903228, 4612675, 4655054, 4679242, 4784454, 4813370, 677209AS, 72089683, 72090472, 82847745, 93191101. (Item #: 104186, Ref: 72089683) $81.00

Water Pump Gasket Set - Fits Models: 5040, 5045, 5050. Replaces 72089504V, 72089504 (Item #: 154686, Ref: 677201A) $7.10

No
Picture
Water Pump Pulley - For water pump 72090472. For tractor models 5040, 5045, 5050. (Item #: 175876, Ref: 72089641) $25.60

Decals and Emblems

$Allis Chalmers 5050 Decal, 2-1\2 inch Diamond, Blue Background, Mylar$
Decal, 2-1/2" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" Blue Background, Mylar decal, (Item #: 100149) $3.40

$Allis Chalmers 5050 Decal, 2-1\2 inch Diamond, Orange Background, Mylar$
Decal, 2-1/2" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" with Orange Background, Mylar decal, (Item #: 100148) $3.40

Decal, 6" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Blue Background, Mylar decal, (Item #: 100147) $5.10

Decal, 6" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Orange Background, Mylar decal, (Item #: 100146) $5.10

No
Picture
Decal, Blue with Border, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers w/Border, Blue, Mylar decal, (Item #: 100145) $8.50

Decal, Blue with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, W/O Border, Long A&S, Blue, Mylar decal, (Item #: 100143) $8.50

No
Picture
Decal Set - HOOD ONLY Decal Set for Allis Chalmers Model 5050. (Item #: 100226, Ref: R4039) $65.00

$Allis Chalmers 5050 Decal, Triangle, Black and Orange with White Background, 1-1\2 inch x 1-1\2 inch, Mylar$
Decal, Triangle, Black and Orange with White Background, 1-1/2" x 1-1/2", Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, 1 1/2" x 1 1/2", Black and orange on white background, Mylar decal, (Item #: 100162) $2.60

Diamond Decal, 6" Clear, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Clear Background, Mylar decal, (Item #: 100173) $5.10

Drive Train

Axle Half Shaft - Used on Allis Chalmers, part number 72090434 is for models 5040 Type 2, 5045, 5050. This part also has Fiat and Oliver / White applications. Replaces OEM numbers: 4995340, TX10752, RDR1006, RDR1008, RRT2072, 40 25 116, 4025116 (Item #: 179354, Ref: 72090434) $178.98

Axle Seal, Inner - Our new replacements seal measures: 5mm x 35mm x 12mm. For tractor models 5040, 5045, 5050. Also replaces OEM #31-2903392, 677332A, 30-3030121, 72090424, 72090076, 72091892, 40000382, 40000380. (Item #: 168019, Ref: 31-2902234) $5.40

Rear Axle Bearing - Part number 63092RS is a bearing with two contact seals. The inside diameter is 1.772 inch (45.008mm), outside diameter 3.937 inch (99.999mm), width 0.984 inch (24.993mm). USed on Allis Chalmers 5040, 5045, 5050. Replaces OEM part numbers 6309, 63092RS, JD9268, 391069X1, 72090055. (Item #: 172867, Ref: 63092RS) $25.40

Electrical System

Alternator - This is a 12 volt, 33 amp, Internally Regulated, External Fan, Clockwise, Iskra style. Replaces 4762563, 4766127, 4998353, 5101645, 9972269, 4998353 (Item #: 120159, Ref: 5101645) $185.00

Flasher Unit - 12 volt, round, 2 terminal, 4 light max. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5045, 5050, 6040, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8550, D21. (Item #: 114128, Ref: 70248109) $4.90

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on Allis Chalmers models: 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 4W220, 4W305, 616, 5040, 5045, 5050, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $29.30

Starter - 12 volt, 9 tooth, clockwise rotation. For tractor models 5045 1981-1983 with 3-158 Fiat diesel, 5050 1977-1983 with 3-168 Fiat diesel. Replaces MT68AA, MT71AA, 1362032. (Item #: 117442, Ref: SND0050) $221.00

$Allis Chalmers 5050 Starter \ Light Switch with Keys$
Starter / Light Switch with Keys - This Switch is used on Allis Chalmers 5040, 5045 and 5050 tractors. Replaces 72093881, 72089440, 72090051 (Item #: 163794, Ref: 72093881) $29.20

Starter Switch with Cold Start - For 5040, 5050. Starter Switch with COLD START. Also replaces 72089444, TX10954. Back of switch has 2 wire connectors and 2 plug connectors (each plug is double spade). (Item #: 167807, Ref: 677481A) $54.98

No
Picture
Wiring Harness, Main - Main wiring harness for DEUTZ/AC models: 5045, 5050. (Item #: 182658, Ref: 72091825) $126.00

Engine Bearings

Bearing - For Allis Chalmers tractor models 5040, 5050, 6060, 6070, Compatible with Long tractor models 350, 360, 360C, 445, 445SD, 445V, 460, 460SD, 460V, 510, 550, 560 Replaces Long OEM number TX50405, TX51844, , Compatible with Oliver tractor models 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, Compatible with White tractor models 2-50, Replaces Carraro manufacturer number CAR27307, Replaces Case IH OEM number 26799990, Replaces Massey Ferguson OEM number 390859X1, Replaces New Holland OEM number 83930328, Replaces Bearing number 30211, Inside Diameter: 55 mm, Outside Diameter: 100 mm, Width: 22.75 mm, (Item #: 176134) $17.98

No
Picture
Main Bearings - .030 - For Allis Chalmers tractor models 5040, 5045, 5050 Replaces Allis Chalmers OEM number 1901806, 72094358, , Compatible with Hesston tractor models 580, 680, 780, 880-5, 980, Compatible with Minneapolis Moline tractor models G450, Compatible with Oliver tractor models 1255, 1265, 1270, 1355, 1365, 1370, Compatible with White tractor models 2-50, 2-60, Bearing size: .030" oversize, Sold per journal, (Item #: 106047) $19.10

Engine Gaskets

Oil Pan Gasket - For Allis Chalmers tractor models 5040, 5045, 5050 Replaces Allis Chalmers OEM number 72089515, , Compatible with Long tractor models 350, 360, 360C, 445, 445SD, 445V, 460, 460SD, 460V, 510, 550, 2360, 2460, 2510 Replaces Long OEM number TX10113, , Compatible with Oliver tractor models 1250, 1255, 1265, 1270 Replaces Oliver OEM number 676758A, , Compatible with White tractor models 2-50, Replaces White OEM number 98484809, 4602067, (Item #: 154746) $10.00

Overhaul Gasket Set - Used on 3 Cylinder 8035.04 and 8035.05 engines. The complete gasket set replaces: 153632376, 1930257, 1909056, 1940072, 1940098, 1909559 (Item #: 168515, Ref: 1909559) $235.00

Upper Gasket Set - Used on the following engines: 8035.04, 8035.05, 8035.05, 8035.06, 8045.05. This kit replaces OEM numbers 1909057, 1909979, 1930258, 1940073, 1940096, 1909264, 01930258, 1909560, 01940073, 1909560, 1909264, 1909057, 1940073, 1940096, 1909979, 1930258 (Item #: 182624, Ref: 1930258) $123.00

Engine Parts

No
Picture
Cylinder Head, Remanufactured, 2090497 - For Allis Chalmers tractor models 5040, 5045, 5050, 6040, Replaces Allis Chalmers Casting number 2090497, Engine 143, 3 Cylinders, Casting No. 2090497, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200048) $1200.01

No
Picture
Cylinder Head, Used - For Allis Chalmers tractor models 5040, 5045, 5050, 6040, Replaces Allis Chalmers Casting number 2090497, Engine(s): 143, Cylinders: 3, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200048, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400048) $349.01

Ring Gear, Flywheel - This Flywheel Ring Gear has 110 teeth. Replaces 04602143, 4602143, 4602143, 153623541, 153623568, 82982157, 0673743, 0673742 (Item #: 159146, Ref: 676786A) $46.70

Exhaust System

Exhaust Elbow - For tractor models 5040, 5045, (5050 engine serial number 600000-699999). Replaces 72089361, 72091541. (Item #: 167918, Ref: 72091261) $66.00

Intake Manifold Gasket - One of these gaskets is used with 4602345 manifold. Gasket 4851921 is also need to complete a set. Replaces original part numbers 677136A and 72089518 (Item #: 175845, Ref: 98400791) $1.20

Intake Manifold Gasket - One of these gaskets is used with 4602345 manifold. Gasket 98400791 is also need to complete a set when used with 4602345 manifold. Replaces original part numbers 677134A and 72089512 (Item #: 175896, Ref: 4851921) $2.10

Manifold - For 3 cylinder Models: 5040, 5045, 5050. Gasket available as part S.62446 requires 3 sold separately. Replaces original part numbers 677138A and 72089552 (Item #: 175878, Ref: 4607842) $64.00

Manifold Gasket - These gaskets are used with 4607842 and 4606570 manifolds. Three or four are required depending on application. Sold individually. Replaces original part numbers 651911, 677135A, 72089513 (Item #: 168606, Ref: S.62446) $4.10

Fuel System / Air Intake

Fuel Bowl - Fuel filter bowl, uses 251397 or 70251397 element. For 5040, 5050, 6040 (Item #: 112513, Ref: 2091267) $5.20

Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on Allis Chalmers 5040, 5050 and 6040. Replaces original part numbers 72091267. Also replaces various manufacturers part numbers 26560111, 676989A, 9918123, A 587675, A587575, FC25 00 02, GL55, T19119, TX10383, R56434 (Item #: 112513, Ref: 1039071M1) $5.20

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Replaces original part numbers 70251307, 70251315, 72089560. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $26.40

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.90

Fuel Filter, CAV type - Fuel filter for tractor models 160, 170, 175, 4660, 5040, 5045, 5050, 5670, 5680, 6040, 6140, 6670, 6680, 6690, 4650. Replaces 70251397, 70252050, 72091264, 72099490 . NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

Fuel Pump - For tractor models 5040, 5045, 5050. Fuel Pump with 0-ring replaces 2089595, 2091469 and 2092036. (Item #: 113518, Ref: 72093848) $22.00

Fuel Tank - For tractor models 5040, 5045, 5050. (Item #: 113523, Ref: 72089848) $346.00

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $15.00

Intake Manifold Heater - This Intake Manifold Heater (Thermostart, Glow Plug) is used in Diesel manifolds on Allis Chalmers 160, 170, 175, 5040, 5045, 5050, 6040, 8745, 8765; Replaces: 72080137, 72089442, 74910312 (Item #: 129233, Ref: 893501M1) $14.70

Gauges

No
Picture
Instrument Cluster Assembly - Instrument housing with all gauges and lights. For tractor models 5045, 5050. (Item #: 104166, Ref: 72093725) $187.91

Tach Drive Cable - This cable if for tractor models 5040, 5045 and 5050. Replaces OEM number 72093805. This Cable has 18mm on the engine side and 16mm on the gauge side. Verify before ordering. Different sizes were used. (Item #: 121697, Ref: 72091198) $24.80

Tach Drive Right Angle - 16 MM. For tractor models 5040, 5045, 5050. Replaces 598816, 677530A, 7209119, 72091195, TX12361 (Item #: 128411, Ref: 72091195) $35.30

Tachometer Drive Adapter - This Tachometer Drive Adapter is engine mounted. It has 18mm cable threads and 20mm engine side threads. Verify measurements, as more than one size cable side were used. Replaces 72091912, 676855AS, 31-2905869. Used on Allis Chalmers 5040, 5045, 5050. Also used on Long 350, 360, 360C, 445, 460, 510, 560, 610 (Item #: 128412, Ref: 4717707) $20.20

Tractor Meter - For tractor models 5040, 5045, 5050. Also replaces OEM numbers 4334916, 4334916V, 52 21 000, 677532A, 72089939, 72091876, TX12360 (Item #: 128407, Ref: 72089939) $93.00

Hydraulic System

No
Picture
Hydraulic Cover Bushing - For tractor models 5040, 5045, 5050. (Item #: 179921, Ref: 72089163) $8.60

Hydraulic Filter - For tractor models 5040, 5045, 5050. Replaces 72093722. (Item #: 167255, Ref: 5103031) $23.60

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces 239804, 1164605, 70239804, 71164605 (Item #: 111242, Ref: 28A116) $14.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Used on Allis Chalmers Combines: A, C, E, EIII, F, K, L, L2, M, M2. Tractors : D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 5040, 5050, 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $26.80

Sealed Beam Bulb, 12 Volt - Hi/Low, 4-1/2 inch diameter. For tractor models 5040, 5045, 5050, 6040, 6060, 6070, 6080, 7000, (7010, 7020 less cab), 7030, 7040, 7045, 7050, 7060, 7080. (Item #: 124720, Ref: 70268648) $26.80

No
Picture
Tail Light Set - Red - For tractor models 5045, 5050. Replaces OEM numbers 677505AS, 30-3014177, 72094112. (Item #: 167703, Ref: 72094112) $34.00

Miscellaneous

Hydraulic Remote Valve, Auxiliary, Right Hand - For Allis Chalmers tractor models 5040, 5045, 5050, Compatible with Long tractor models 260C, 310, 310C, 350, 360, 360C, 445, 445SD, 445V, 460SD, 510, 560, 610, 610C, 2360, 2460, 2510, 2610 Replaces Long OEM number TX11266, , Compatible with Oliver tractor models 1250, 1250A, 1255, 1265, 1270, 1365, 1370, 1450, 1465, 1470, Compatible with White tractor models 2-50, 2-60, Replaces White OEM number 31-2906077, Pressure control valve not included, (Item #: 175949) $170.00

Oil System

No
Picture
Dipstick - For Allis Chalmers tractor model 5050 Replaces Allis Chalmers OEM number 596428, , Compatible with Long tractor model 310, 310C, 350, 360, 445, 445SD, 445V, 460, 460SD, 460V, 510, 610, 610C, 2360, 2460, 2510, 2610 Replaces Long OEM number TX17084, , Compatible with Oliver tractor model 1250A, 1255, 1265, 1270, 1355, 1365 Replaces Oliver OEM number 4024029, , Compatible with White tractor model 2-50, 2-60, Replaces White OEM number 40 24 029, (Item #: 180963) $8.10

Oil Pump - For tractor models 5040, 5045, 5050. (Item #: 113519, Ref: 72091632) $91.00

Paint

No
Picture
Paint, Allis Orange, 1 Gallon - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100110, Ref: TP280GAL) $59.00

No
Picture
Paint, Gloss Black, 1 Gallon - Allis Chalmers Gloss Black was used as trim color on models 5010, 5020, 5030, 5045, 5050, 6140, 6060, 6070. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - Allis Chalmers Gloss Black was used as trim color on models 5010, 5020, 5030, 5045, 5050, 6140, 6060, 6070. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - Allis Chalmers Gloss Black was used as trim color on models 5010, 5020, 5030, 5045, 5050, 6140, 6060, 6070. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

Seats

Complete Suspension Seat - Vinyl, Black. For tractor models 5040, 4045, 5050. (Item #: 184768, Ref: S.68483) $311.00

Sheet Metal / Body Parts

Bumper - Fits tractor models: 5040, 5045, 5050. (Item #: 156289, Ref: S.61053) $90.00

Cowl, Rear - For tractor models 5040, 5045, 5050. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Also fits Long 350, 445, 445DT, 445SD and Fiat 450, 480, 500, 540, 550, 600, 640. Replaces 72089709. (Item #: 157715, Ref: 677618A) $640.35

No
Picture
Fender, LH - For tractor models 5040, 5045, 5050. Replaces 72091387. This part ships via truck freight. Please call for pricing and ordering. (Item #: 157725, Ref: 72090418) $370.00

No
Picture
Fender, RH - For tractor models 5040, 5045, 5050. Replaces 72091386. This part ships via truck freight. Please call for pricing and ordering. (Item #: 157728, Ref: 72090417) $491.61

Fender Right Hand - This is the right hand fender for Allis Chalmers 5050 Orchard without Roll Over Protection (ROPS). Replaces 72088937, 72093264 (Item #: 157720, Ref: 677654A) $266.00

Fender, Round Style, LH - This is the Left Hand Fender for Allis Chalmers 5050 Orchard, without Roll Over Protection (ROPS). It replaces 72093265, 72088937 (Item #: 157722, Ref: 677655A) $266.00

Fuel and Radiator Inspection Lid - For tractor models 5040, 5045, 5050. (Item #: 157718, Ref: 72089341) $29.90

Grill - Front Grill without upper screen. This is not original. Will work 5040, 5045, 5050. If replacing original grill you will also need Upper Screen, part number 673392A, sold separately. Also fits Long 350, 445, 445DT, 445SD and Fiat 450, 480, 500, 540, 550, 600, 640. Replaces 72088526, TX11128, 4950401, 04950401 (Item #: 157701, Ref: 673407A) $175.00

No
Picture
Grill Pad - Two used per tractor, sold individually. For tractor models 5040, 5045, 5050. (Item #: 157735, Ref: 72089763) $1.70

Grill Retaining Pin - This Grill Retaining Pin is used with replacing an original grill with 673407A. Used on Allis Chalmers 5040, 5045, 5050. Also fits Long 350, 445, 445DT, 445SD and Fiat 450, 480, 500, 540, 550, 600, 640. (Item #: 157706, Ref: 77615A) $12.50

Grill Screen, Upper - This Upper Grill Screen is used with 673407A when replacing the original grill on Allis Chalmers Will work 5040, 5045, 5050. Also fits Long 350, 445, 445DT, 445SD and Fiat 450, 480, 500, 540, 550, 600, 640. (Item #: 157703, Ref: 673392A) $17.70

Handle - Hood Catch - For Allis Chalmers tractor models 5040, 5045, 5050 Replaces Allis Chalmers OEM number 72089275, , Compatible with Long tractor models 350, 445, 445SD Replaces Long OEM number TX11152, , Compatible with Oliver tractor models 1250 (s/n 711542 - later), 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1450, 1465, 1470 Replaces Oliver OEM number 674396A, , Compatible with White tractor models 2-50, 2-60, (Item #: 157733) $11.90

Hood - For tractor models Allis Chalmers 5040, 5045, 5050. Also fits Long 350, 445, 445DT, 445SD and Fiat 450, 480, 500, 540, 550, 600, 640.Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 72089711 (Item #: 155841, Ref: 677620A) $258.00

Hood Cowl, Front - Inspection Lid for top of cowl is available as part number 677607A. Used on Allis Chalmers 5040, 5045, 5050. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Also fits Long 350, 445, 445DT, 445SD and Fiat 450, 480, 500, 540, 550, 600, 640. Replaces 72089368 (Item #: 157705, Ref: 677609A) $371.12

Hood Pad - For tractor models 5040, 5045, 5050. Replaces 72089763, 72089767, 72089747 (Item #: 157736, Ref: 72089747) $2.00

Side Panel, Left - For tractor models 5040, 5045, 5050. Will work 5040, 5045, 5050. If replacing original grill you will also need Upper Screen, part number 673392A, sold separately. Also fits Long 350, 445, 445DT, 445SD and Fiat 450, 480, 500, 540, 550, 600, 640. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 720093803, 4950917, TX1131 (Item #: 157713, Ref: 677622A) $148.00

Side Panel, Right - For Allis Chalmers, 5040, 5045, 5050. Also fits Long 350, 445, 445DT, 445SD and Fiat 450, 480, 500, 540, 550, 600, 640. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 72089712, TX11132 (Item #: 157710, Ref: 677621A) $167.00

Steering

King Pin Thrust Bearing - Used on Carraro 4WD Axles, this King Pin Thrust Bearing (Trunion Bearing) replaces OEM numbers 5119699, 05119699, TX51785, OSA 206S, OSA206S (Item #: 156139, Ref: 5119699) $106.00

Power Steering Cylinder Seal Kit - This Steering Cylinder Repair Kit Repairs 72090551 Power Steering Cylinders on Allis Chalmers 5040, 5045, 5050. Contains 70931976 Seal, 70935239 Seal, 72090244 Seal, 72090255 Gasket, 72093888 Scraper, 72090259 Gasket, 72090260 Gasket, 72090261 Seal, 72090273 Gasket, 72090276 Seal, 72090801 Gasket. Either 70931976 OR 70935239 is used depending on the Rod in your Cylinder. Replaces 72093623 (Item #: 182664, Ref: 1930229) $192.00

Power Steering Filter - With and inside diameter of 5/16 inches and length 4-7/8 inches, this filter replaces OEM numbers TX14841, 1909144, 566999, 72093701, 30-3033597. Used on Allis Chalmers 5040, 5045, 5050. (Item #: 180745, Ref: TX14841) $28.20

Power Steering Pump Hub - This Power Steering Pump Hub / Coupler is used on Allis Chalmers models: 5040, 5045, 5050. It replaces OEM part numbers 4630543, 5118570, 05118570, 5118570, TX11903, 40 58 356, 40 58 355, 4058355, 30-3042685 (Item #: 163988, Ref: TX11903) $12.00

Spindle Bushing - For model 5040, 5045, 5050 all with adj. front axle. (Item #: 153511, Ref: 72094403) $18.00

Spindle, LH - This spindle measures A = 10.750 inch, B = 1.496 inch, C = 1.377 inch, D = .984 inch. For tractor models 5045, 5050 with adjustable front axle. This spindle uses wheel bearing kit part number WBKAC8. (Item #: 104270, Ref: 72090685) $216.32

Spindle, RH - This spindle measures A = 9.437 inch, B = 1.493 inch, C = 1.377 inch, D = .984 inch. For model 5040 with adjustable front axle. Replaces TX10808, 40 30 015, 588326, 672554AS, 72089232. (Item #: 176014, Ref: 72089232) $80.00

Spindle, RH - This spindle measures A = 10.750 inch, B = 1.496 inch, C = 1.377 inch, D = .984 inch. For tractor models 5045, 5050 with adjustable front axle. This spindle uses wheel bearing kit part number WBKAC8. (Item #: 104269, Ref: 72090684) $161.00

Steering Arm, LH - This Steering Arm is used on the left side on Allis Chalmers 5040, 5045 and 5050 tractors. Replaces TX10826, 40 30 104, 588768, 672624A, 72090116 (Item #: 153814, Ref: 72090116) $53.00

Steering Arm, RH - This Steering Arm is used on the right side on Allis Chalmers 5040, 5045 and 5050 tractors. It replaces TX10825, 40 30 103, 588299, 672545A, 72090113 (Item #: 153423, Ref: 72090113) $44.40

Steering Wheel - For Allis Chalmers tractor models 5045, 5050 Replaces Allis Chalmers OEM number 72091550, , Compatible with Long tractor models 260, 310, 350, 360, 445, 460, 550, Replaces Long OEM number TX10409, Replaces manufacturer number 3834023, 902080, (Item #: 153803) $61.41

Tapered Roller Bearing and Cup - For Allis Chalmers tractor models 5050, 6060, 6070, 6080 Replaces Allis Chalmers OEM number 71355915, 72090766, , Compatible with Oliver tractor models 1265, 1270, 1365, 1370 Replaces Oliver OEM number 24903470, , Compatible with White tractor models 2-50, 2-60, 700, Replaces White OEM number 31-2900283, Replaces Long OEM number TX51794, Replaces Massey Ferguson OEM number 3383324M1, I.D.: 70 mm, O.D.: 110 mm, Width: 25 mm, (Item #: 156179) $64.00

$Allis Chalmers 5050 Tapered Roller Bearing W\ Cup$
Tapered Roller Bearing W/ Cup - For Allis Chalmers tractor models 5040, 5045, 5050 Replaces Allis Chalmers OEM number 72091587, , Compatible with Long tractor models 310, 350, 360, 445, 460, 510, 610, 2360, 2460, 2510, 2610, Replaces Long OEM number TX51692, Replaces OEM number 24903450, 32012, (Item #: 156178) $46.50

Tie Rod Assembly - This new Tie Rod Assembly is used on Allis Chalmers 5045 and 5050. It also fits Long 310, 350, 360, 445, 460, 460V, 510, 550, 560, 610 when using TX10817 tie rod assembly. It replaces Allis Chalmers part number 72093230 (Item #: 152347, Ref: 31-2900155) $127.00

Tie Rod End - 20 mm adjustment thread, A= 3.156 inch, B= M20 1.0 right hand thread. For tractor models 5045, 5050. (Item #: 152168, Ref: 72090115) $29.70

Tie Rod End, Long - A = 15.750 inches, B = .789 inches. For tractor models 5045, 5050, (400, 480, 500, 540, 550, 600, 640 all with 2WD front axle). (Item #: 109635, Ref: 72090710) $42.70

Wheels

Bar Clamp - Wheel clamp, disc to rim. For power shift rear wheels. Serial number 42001 and up. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 5045, 5050, 6060, 6070, 6080, 6140, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, D15, D17. Replaces 70235676 (Item #: 124526, Ref: 898021M1) $18.00

Hub Cap - Used on Allis Chalmers models 5040, 5045, 5050. This part replaces 92312150, 92312550, 9231 268 0, 9231 215 0, 9231 255 0, 92312680, TX10867, 4957312, 72089777 (Item #: 155273, Ref: 4957312) $12.80

Power Adjust Rim Clamp - For Allis Chalmers tractor models D15, D17 (s/n 42001 - later), 160, 170 (with 28" rims), 175 (with 28" rims), 180 (with 28" and 30" Rims), 185 (with 28" and 30" Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28" and 34" Rims), 6070 (with 28" and 34" Rims), 6080 (with 28" and 34" Rims), 6140 (with 28" rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, Replaces Allis Chalmers OEM number 70235676, (Item #: 118628) $15.00

Power Adjust Rim Clamp, Used - For Allis Chalmers tractor models D15, D17 (s/n 42001 - later), 160, 170 (with 28" rims), 175 (with 28" rims), 180 (with 28" and 30" Rims), 185 (with 28" and 30" Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28" and 34" Rims), 6070 (with 28" and 34" Rims), 6080 (with 28" and 34" Rims), 6140 (with 28" rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, Replaces Allis Chalmers OEM number 70235676, For a new version of this item use Item #: 118628, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 418628) $10.01

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

No
Picture
Wheel Bearing Kit - Kit includes 1 each of bearings 6305, 2389930 and 1 seal 72090687. For tractor models 5045, 5050 with adj. front axle. (Item #: 104312, Ref: WBKAC8) $58.00

Wheel Stud - Measuring M16 x 1.5P x24.5mm, this wheel lug bolt has front and rear wheel applications, check measurements before ordering. Replaces 4959002, VPH6540, 562324, 76608128, 495002, 4959002, 04959002, TX10863, 4301104. Also used in Fiat, Long Tractor, and Universal Tractor applications. (Item #: 172851, Ref: 4959002) $2.30

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Item #: 183055, Ref: R4634) $13.80

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Item #: 183122, Ref: R4633) $11.60

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Item #: 183053, Ref: R4632) $9.60

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Item #: 183049, Ref: R5234) $2.50

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Item #: 100153, Ref: R0675) $3.40

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Item #: 100154, Ref: R0676) $8.50

AC Logo Decal - 24 inches long, Black and Orange. (Item #: 183479, Ref: R0677) $26.80

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Item #: 100163, Ref: R5168) $3.40

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Item #: 100152, Ref: R5169) $10.00

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Item #: 183047, Ref: R5233) $22.90

No
Picture
Power Shift Decals - One pair, white. For the cab on some Allis models. (Item #: 183474, Ref: R0674) $26.80

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Item #: 105281, Ref: D4PE12029AA) $15.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

Spark Plug - Fits all models 1953 thru 1975 using 1/2" reach, 7/8" heck size. (Item #: 113918, Ref: AL3116) $4.90

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

NOTE

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

$Allis Chalmers 5050 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Allis Chalmers 5050 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Allis Chalmers 5050 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Allis Chalmers 5050 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Allis Chalmers 5050 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Allis Chalmers 5050 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Allis Chalmers 5050 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.75 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.50

$Allis Chalmers 5050 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H. Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Orange - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161192) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100109, Ref: TP280QT) $23.30

No
Picture
Paint, Allis Orange, Spray Can - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100108, Ref: TP280SP) $7.80

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Universal - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012) $58.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.20

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00