FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers 7080 Tractor Parts

[Categories] [All Allis Chalmers Models] [Print]

Belts

No
Picture
Belt - Fan, Set of 2, .688" x 61.25" - For Allis Chalmers tractor models 7080 (s/n 3829-earlier), 7080 (s/n 3829-later), 7580 (s/n 2612-earlier), 7580 (s/n 2612-later), Replaces OEM number 70269183, Replaces AGCO OEM number 70269183V, .688" x 61.25", Set of 2, (Item #: 199062) $52.00

Clutch

Clutch Disc - This is a new Ceramic, four button Clutch Disc, 12 inch, 1-1/2 inch hub, 23 spline. Tractors: 4W220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070. Replaces 70269728GV, D269728, 70269728. (Item #: 182965, Ref: 70269728) $167.00

Clutch Disc, Remanufactured, 70269728 - For Allis Chalmers tractor models 4W-220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70269728, 70272058, Clutch Size: 12", Clutch Hub: 1-1/2", Clutch Spline: 23, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 206318) $140.00

Clutch Disc, Remanufactured, 70269728 - For Allis Chalmers tractor models 4W-220, 7010, 7020, 7030, 7040 (s/n 5214 - earlier), 7045, 7050, 7060 (s/n 3893 - earlier), 7080 (s/n 1873 - earlier), 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70269728, 70272058, Clutch Size: 12", Clutch Hub: 1-1/2", Clutch Spline: 23, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 206319) $184.00

Clutch Disc, Remanufactured, 70269728 - For Allis Chalmers tractor models 4W-220, 7010, 7020, 7030, 7040, 7045, 7060, 7080, 7580, 8010, 8030, 8050, 8070 (All with Cummins conversion), Replaces Allis Chalmers OEM number 70269728, 70272058, Clutch Size: 12", Clutch Hub: 1-1/2", Clutch Spline: 23, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 206321) $138.01

No
Picture
PTO Clutch Separator Plate - This PTO Clutch Separator Plate is for tractor models (180, 185 all use 6), (190, 190XT, 190XT III, 200 all use 8), (4W-220, 7045, 7060, 7080, 7580, 8050, 8070 all use 5), (4W-305, 8550 both use 7), (7000 use 3), (7010, 7020, 7030, 7040, 7050, 8010, 8030 all use 4). (Item #: 172652, Ref: 70265486) $27.90

Cooling System

Gasket - Thermostat, 74025101, Gleaner, 74025101 - For Allis Chalmers tractor models D21, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Compatible with Allis Chalmers Construction and industrial models TL345B, TL545, Compatible with Allis Chalmers Engine (s) 649 (diesel) Replaces Allis Chalmers OEM number 74025101, 71364767, 74007956, , Compatible with Gleaner Combine (s) F, F2, F3, G, K2, L, L2, L3, M, M2, M3, N5, N6, Replaces Gleaner OEM number 74025101, 71364767, 74007956, Thermostat Housing to Block, (Item #: 158245) $2.40

Gasket - Thermostat, 74029324, Gleaner, 71364762 - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Allis Chalmers Engine (s) 670HI (diesel) Replaces Allis Chalmers OEM number 74029324, 71364762, , Compatible with Gleaner Combine (s) L2, L3, N5, N6, Replaces Gleaner OEM number 71364762, 74029324, (Item #: 158260) $5.70

No
Picture
Oil Cooler Elbow, Used - For Allis Chalmers tractor models 4W-220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Replaces Allis Chalmers OEM nos 74036091, Replaces Allis Chalmers Casting nos 4035342, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453645) $85.01

Pulley, Water Pump - Double groove. For tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. (Item #: 172523, Ref: 74037185) $134.00

Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Item #: 110011, Ref: 70254891) $7.00

No
Picture
Radiator Cushion Foam Kit - For Allis Chalmers tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, (Item #: 176925) $123.00

Radiator Hose, Lower - A = 2.250 inch, B = 2.375 inch. For tractor models 7080, (8050 late), 8070. (Item #: 159564, Ref: 70268974) $22.80

Radiator Hose, Upper - Our new upper radiator hose has an inside diameter of 2.250 inches on the larger end, and 2.375 inches on the smaller end. For tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580. (Item #: 159562, Ref: 70267816) $23.10

No
Picture
Radiator Pad - For Allis Chalmers tractor models D17, D21, 185, 190, 190XT, 200, 210, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Compatible with Ford tractor models 2N, 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5610S, 5700, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7810S, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 450, 455, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 650, 655, 655A, 755, 755A, 755B Replaces Ford OEM number 81811605, C5NN8125A, 81718154, 82988223, , Compatible with New Holland tractor models 6610S, 7010, 8010, Replaces Case IH OEM number 82988223, 81811605, C5NN8125A, Overall Width: 36 mm, Thickness: 5 mm, (Item #: 185148) $3.40

Thermostat - For tractor models 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, (D17 serial number 119938 and up), (D19 diesel), D21. Replaces 74025103. (Item #: 113939, Ref: EAF8575BWG) $14.70

Water Pump - For tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. Water pump with gasket and o-rings, less pulley and back housing. Replaces 74035859, 74062317. (Item #: 100040, Ref: 74036573) $137.00

Water Pump Gasket - For Allis Chalmers tractor models D19, D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 74029327, For water pump use 100040, (Item #: 153396) $3.40

Water Pump Gasket, Outlet - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 200, 210, 220, 7000, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 740251062, For water pump use 100039, (Item #: 153403) $2.30

Water Pump Gasket, Pump to Plate - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 200, 210, 220, 7000, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 74026887, Pump to Plate, For water pump use 100039, (Item #: 153402) $5.00

Water Pump O-Ring - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70923971, For water pump use 100040, (Item #: 153397) $1.90

Decals and Emblems

No
Picture
Decal Set - Side Panel set for Allis Chalmers Model 7080. (Item #: 183625, Ref: R4046) $70.00

Drive Train

Gear Shift Boot - For tractor models D17, D19, 170, 175, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 115401, Ref: 233767) $9.10

Gear Shift Lever Pins - These Standard Gear Shift Lever Pins are 0.325 inches wide on the square end and 0.250 inch round pin diameter. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 203465, 70203465. Price is for two. (Item #: 153119, Ref: 70203465) $11.20

Gear Shift Lever Pins, Oversize - These OVERSIZE Gear Shift Lever Pins are 0.375" wide on the square end and 0.285" round pin diameter. They are used to tighten up worn shift lever and must be ground to fit the existing worn lever. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 218859, 70218859 Price is for two. (Item #: 180156, Ref: 70218859) $15.90

Gear Shift Lever Pins - Pair - For Allis Chalmers tractor models B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70203465, 203465, Pin Measures 0.325" Wide Square End, 0.285" Round Pin Diameter, Used to "tighten up" worn shift lever., Must be ground to fit existing worn lever., Sold in pairs, For Standard Size Pins use Item #: 153119, (Item #: 129236) $16.00

Electrical System

Alternator - New, internal regulated, 72 Amp. 3 terminal three o-clock position, use repair kit ARK-4. For 7030, 7040, 7050, 7060, 7080 (Item #: 110572, Ref: 1102920) $116.00

Alternator - 12 volt, 61 amp. For tractor models (F2 1978 to 1980 with either 292 gas, 4-200 diesel, or 2350 diesel), (G 1978 to 1979 with either 250 gas or 2300 diesel), (K2 with 1978 to 1981 with either 250 gas or 4-200 diesel), (L 1972 to 1976 with either 350 gas or 6-301 diesel), (L2 1977 to 1979 with either 6-301 diesel or 6-426 diesel), (M 1973 to 1977 with either 350 gas or 6-301 diesel), (M2 1977 to 1979 with either 350 gas, 6-301 diesel or 6-426 diesel), (6060, 6070, 6080 1980 to 1986 with 4-200 diesel), (7000, 7010, 7020 1978 to 1981 with 6-301 diesel), (7040, 7050, 7060, 7080 1974 to 1975 with 6-426 diesel), (8010 1982 to 1985 with 6-301 diesel). Replaces 1102936, 1103165, 1103035. (Item #: 110572, Ref: ADR0133) $116.00

No
Picture
Alternator - For tractor models (5040 1976 to 1980 with 3-143 Uzina diesel), (7030, 7040, 7045, 7060, 7080, 7580 1976 to 1981 with 6-426 diesel). Replaces A1-151. Please allow up to 2 weeks delivery on this item. (Item #: ANE0001) $902.52

No
Picture
Alternator Pulley - For Allis Chalmers tractor models 7030, 7040, 7050, 7060, 7080, 8010, Replaces Allis Chalmers OEM number 70267872, OD: 3.55", ID: .671", Grooves: 2, (Item #: 176918) $70.00

No
Picture
Alternator Pulley - For Allis Chalmers tractor models 4W-220, 7040, 7045, 7060, 7080, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70269548, OD: 3.55", ID: .671", Grooves: 2 with Keyway, (Item #: 176919) $70.00

Blower Motor - 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. For tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 9130, 9150, 9170, 9190, 9435, 9455, 9630, 8635, 9650, 9655, 9670, 9675, 9690, 9695, 9815. Replaces BM333812, 72162089, 578041. (Item #: 108656, Ref: 72162089) $74.00

Flasher Unit - 12 volt, round, 2 terminal, 4 light max. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5045, 5050, 6040, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8550, D21. (Item #: 114128, Ref: 70248109) $4.90

Ignition Key Switch - For Allis Chalmers tractor models 6060, 6070, 6080, 7010 (s/n 2409 - later), 7020 (s/n 4323 - later), 7045 (s/n 3732 - later with electric fuel pump), 7060 (s/n 7824 - later), 7080 (s/n 3660 - later), 7580 (s/n 2505 - later), 8550 (s/n 1642 - later), Replaces Allis Chalmers OEM number 70270334, (Item #: 118500) $32.70

Light Switch - For Allis Chalmers tractor models 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550, Replaces Allis Chalmers OEM number 70258800, (Item #: 124291) $39.00

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on Allis Chalmers models: 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 4W220, 4W305, 616, 5040, 5045, 5050, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $29.30

No
Picture
Solenoid - Starter solenoid, 12-volt. Services Delco starters 1113412, 1113419. For tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580. (Item #: 105682, Ref: 70269209) $32.80

No
Picture
Solenoid, 12 Volt - Starter solenoid. For tractor models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 all using Delco starters 1114142, 1113419, 1113657. (Item #: 105682, Ref: 608844) $32.80

Solenoid, 12 Volt - Starter solenoid. For tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 all using Nippondenso starters 028000-3290, 028000-3930, 028000-3970, 028000-4930. (Item #: 105696, Ref: 603068) $51.00

Starter - 12 volt, 12 tooth, clockwise rotation. For tractor models (7030, 7050 1974 with 6-426 diesel), (7040 1975-1977 with 6-426 diesel), (7045, 7060, 7080 1978-1981 with 6-426 diesel), (4580 1977-1981 with 6-426 diesel), (8030, 8050, 8070 1982-1985 with 6-426 diesel). Replaces 028000-4930. (Item #: 118626, Ref: SDR0054) $263.00

Starter - Delco Style (4893), Remanufactured, 70268757, Delco Remy, 1113413 - For Allis Chalmers tractor models 4W-220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 Replaces Allis Chalmers OEM number 70268757, 9004857-0, , Compatible with Gleaner Combine (s) L, L2, L3, M, M2, M3, N5, N6, N7, R5, R6 Replaces Gleaner OEM number 70268757, , Compatible with International tractor models 4366, 4386, 5088, 5288, 5488, 7388, Replaces International OEM number 678441C91, 67928C91, 107677C9, Replaces Delco Remy manufacturer number 1113413, 1113419, 1113425, 12301399, 1113582, Replaces manufacturer number 4893, 141-271, 141-277, 91-01-4087, 91-01-4134, Delco Style, Voltage: 12, Rotation: Clockwise, Teeth: 12, (Item #: 203488) $488.10

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch, number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch and manifold heater switch. Replaces: 227029, 240962, 242988, 245866, 245936, 253322, 70253322, 71191589, 72160068. (Item #: 121141, Ref: R7994) $12.50

Engine Bearings

Camshaft Bearing Set - Standard - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Allis Chalmers Engine (s) 670HI, 670I Replaces Allis Chalmers OEM number 74025025, 74025238, , Compatible with Gleaner Combine (s) N5, N6, Sold as complete set, Set includes: 1 front bearing 74025025, 5 rear and intermediate 74025238, (Item #: 105973) $83.58

Connecting Rod Bearing - .030 - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Allis Chalmers Engine (s) 670HI, 670I Replaces Allis Chalmers OEM number 74036428, , Compatible with Gleaner Combine (s) N5, N6, Bearing size: .030" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105964, (Item #: 105967) $7.98

Main Bearings - .010 Oversize - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. Replaces 74035037, 74035042 (Item #: 105970) $201.00

Main Bearings - .020 Oversize - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. Replaces 74025273, 74035043 (Item #: 105971) $331.00

No
Picture
Main Bearings - .020" Oversize - Set - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 74061650, 74061816, Set Includes: 6 Main Bearings and 1 Thrust Washer, Bearing Size: .020" Oversize, (Item #: 174362) $288.00

Main Bearings - .030 Oversize - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. Replaces 74025273, 74035043 (Item #: 105972) $264.00

Main Bearing Set, Standard - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. Replaces 74025006, 74035008 (Item #: 105969, Ref: MS-2002P) $270.00

Rod Bearing - Single rod bearing in 0.010 undersize. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1/4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold individually. YTP CRK-A426-010. (Item #: 105965, Ref: CRK-A426-010) $20.30

Rod Bearing - Single rod bearing in 0.020 undersize. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1/4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold individually. YTO CRK-A426-020. (Item #: 105966, Ref: CRK-A426-020) $22.40

Rod Bearing - Single Rod Bearing. For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Connecting Rod Bearing Set (6). YTO CRK-A426. (Item #: 105964, Ref: CRK-A426) $22.30

Rod Bearing Set - Internal Engine Parts. Standard rod bearing. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1/4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold Individually. YTO CRK-A426. (Item #: 105964, Ref: CRK-A426) $22.30

Engine Gaskets

Conversion Gasket Set - For Allis Chalmers tractor models D21, 4W-220, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Allis Chalmers Construction and industrial models 7GB, 645B, Compatible with Allis Chalmers Engine (s) D3400, D3500, D3700, D3750, 670H, 670HI, 670I, 670T, Compatible with Gleaner Combine (s) L, L2, L3, N5, N6, R5, R6, Includes crank seals, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 105974) $273.00

Crankshaft Seal - Rear - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, Replaces Allis Chalmers OEM number 74062088, (Item #: 167627) $111.00

Front Crankshaft Seal - For Allis Chalmers tractor models D21, 4W-220, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Allis Chalmers Construction and industrial models HD11 (s/n 6427-later), HD21, HD21A, HD21P, TL30, TL745, 7GB, 45, 145, 645B, Compatible with Allis Chalmers Engine (s) D3400, D3500, D3700, D3750, 670H, 670HI, 670I, 670T Replaces Allis Chalmers OEM number 74036340, , Compatible with Gleaner Combine (s) L, L2, L3, N5, N6, R5, R6, Engine: 670 Diesel, 670HI Diesel, 10000 Diesel, 11000 Diesel, (Item #: 105977) $41.40

Head Gasket Set - For tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Head Gasket set. Used in 426 CID 6 Cylinder Diesel Engine. Replaces 4036897, 74036897, 4035933, 74035933, 74037142, 74036897AG, 70277040, 74037142, 4036897AG, 70277040, 4036897, 70277414, 4037142, 4037142. (Item #: 105975, Ref: VGK9192) $173.00

No
Picture
Lower Gasket - Gasket Set. Lower gasket set with crankshaft seals. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1/4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Item #: CS9192) $323.25

Manifold Gasket - For Allis Chalmers tractor models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 8030, 8050, 8070 (with D3500 engines), Compatible with Gleaner Combine (s) L, L2, M, M2, N5 (with D3500 Engines), (Item #: 101489) $29.70

Pan Gasket Set - Gasket Set. Pan gasket only. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1/4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. For 262, D19, GLEAMER C. (Item #: 105976, Ref: PS30534) $8.90

No
Picture
Rear Main Seal - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Allis Chalmers Engine (s) D3400, D3500, D3700, D3750, 670H, 670HI, 670I, 670T, Compatible with Gleaner Combine (s) L, L2, L3, MH2, MH3, N5, N6, R5, 6-Cylinder Turbo Diesel Engine, (Item #: 184223) $82.00

No
Picture
Rear Main Seal - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine (Item #: 184156, Ref: SS47882) $169.00

No
Picture
Valve Cover Gasket - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Allis Chalmers Engine (s) 670HI (diesel) Replaces Allis Chalmers OEM number 74035214, , Compatible with Gleaner Combine (s) L2, L3, N5, N6, Replaces Gleaner OEM number 74035214, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158279) $28.50

Engine Rebuild Kits

No
Picture
Basic Overhaul Kit - Basic Engine Kit without bearings. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1/4 inch standard bore. Contains: sleeves, pistons and rings, pins and retainers, pin bushings, gasket sets with crankshaft seals and wear sleeve. For tractors: D21, 7010, 7020, 8010. (Item #: 130503, Ref: BEKA426-LCB) $1429.01

Cylinder Head Valve Overhaul - For D21, D210, D220, all serial number 3D16241 and up. For 7030, 7040, 7045, 7050, 7060, 7080, 7580, all with D3400 and D3500 Non Mark II engine. 6 cylinder 426 CID. (Item #: VOKA426) $413.27

Cylinder Kit - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, Compatible with Allis Chalmers Engine (s) D3400, D3500, D3700, D3750, 670HI, 670I, 670T Replaces Allis Chalmers OEM number 74036682, , Compatible with Gleaner Combine (s) L, L2, Piston Pin: 1.50", Bore: 4.250", (Item #: 128707) $147.00

Engine Rebuild Kit - Less Bearings, D3400, D3500, D3700, D3750, 670HI - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, Compatible with Allis Chalmers Construction and industrial models 7GB, Compatible with Allis Chalmers Engine (s) D3400 (diesel), D3500 (diesel), D3700 (diesel), D3750 (diesel), 670HI (diesel), 670I (diesel), 670T (diesel), Compatible with Gleaner Combine (s) L, L2 (engine s/n 70-25867-earlier), Bore: 4.125", Piston Pin Diameter: 1.500", Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For cam bearings use Item #: 105972, (Item #: 130503) $1429.01

Engine Parts

Camshaft - New for 210, 220, 4W220, 7030, 7040, 7045, 7050, 7060, 7080, 8580, 8030, 8050, 8070. (Item #: 160895, Ref: 74029000) $302.15

No
Picture
Camshaft Gear, Used - For Allis Chalmers tractor models D21, 4W-220, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Replaces Allis Chalmers OEM nos 74036496, Replaces Allis Chalmers Casting nos 4029001-08, Teeth: 52, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453683) $135.01

Connecting Rod, Used - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580 Replaces Allis Chalmers OEM nos 74036217, , Compatible with Gleaner Combine(s) L, L2, L3 (s/n 13001-28000), Replaces Gleaner OEM nos 74036217, Replaces Casting nos 4027333, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434632) $66.01

No
Picture
Crankshaft, Remanufactured, 4025479, 4025042 - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080 (Diesel), Replaces Casting number 4025479, 4025042, 4027134, 4028603, 4028608, 4035953, 4036404, 4037168, 4037190, 4027133, With small weights, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200022) $710.01

Crankshaft, Remanufactured, 74036264, 4036264 - For Allis Chalmers tractor models 7080, 7580 (Diesel), Replaces Allis Chalmers OEM number 74036264, Replaces Casting number 4036264, 4036980, With large weights, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished, Additional Handling and Oversize Fees Apply To This Item, (Item #: 200023) $930.01

No
Picture
Cylinder Head, Remanufactured, Gleaner, 4025531 - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Gleaner Combine (s) L, N5, N6, Replaces Casting number 4025531, Casting No. 4025531, Engine 426, D3500, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205463) $1450.01

No
Picture
Cylinder Head, Remanufactured, Gleaner, 4028163 - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Gleaner Combine (s) L, N5, N6, Replaces Casting number 4028163, Casting No. 4028163, Engine 426, D3500, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205466) $1450.01

No
Picture
Cylinder Head, Remanufactured, Gleaner, 4028944 - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Gleaner Combine (s) L, N5, N6, Replaces Casting number 4028944, Casting Number 4028944, Engine 426, D3500, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205468) $1450.01

No
Picture
Cylinder Head, Remanufactured, Gleaner, 4029163 - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Gleaner Combine (s) L, N5, N6, Replaces Casting number 4029163, Casting No. 4029163, Engine 426, D3500, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205467) $1450.01

Cylinder Head, Remanufactured, Gleaner, 4035246 - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, Compatible with Gleaner Combine (s) L, N5, N6, Replaces Casting number 4035246, Engines 426, D3500, Cylinders: 6, Casting No. 4035246, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200043) $1575.01

No
Picture
Cylinder Head, Remanufactured, Gleaner, 4036658 - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Gleaner Combine (s) L, N5, N6, Replaces Casting number 4036658, Casting No. 4036658, Engine 426, D3500, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205464) $1450.01

No
Picture
Cylinder Head, Remanufactured, Gleaner, 4036982 - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Gleaner Combine (s) L, N5, N6, Replaces Casting number 4036982, Casting No. 4036982, Engine 426, D3500, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205465) $1450.01

Lifter - For tractor models 180, 185, (190, 190XT, 190XT III gas or diesel), 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7060, 7080, 7045, (7050 diesel). Replaces 74026699, 4026699, HC474026699 (Item #: 74026699_) $21.26

Lifter, Used - For Allis Chalmers tractor models D21, 4W-220, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Compatible with Allis Chalmers Harvester(s) 880, Compatible with Allis Chalmers Construction and industrial models I600, 7GB, 345B, 545, 545B, 615, 645B, 650, 653, 840B, 940, Compatible with Allis Chalmers Engine(s) D2200, D2800, D2900, D3400, D3500, D3700, D3750, G2500, 433I, 433T, 649, 649I, 649T, 670H, 670HI, 670I, 670T Replaces Allis Chalmers OEM number 74026699, , Compatible with Gleaner Combine(s) F, F2, F3, G (s/n 17000-earlier), K2, L, L2 (engine s/n 70-25867-later), L3, M, M2, M3, N5, N6, R5, R6, Replaces Gleaner OEM nos 74026699, For a new version of this item use Item #: 160907, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439716) $4.76

Push Rod, Used - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 Replaces Allis Chalmers OEM nos 74028110, , Compatible with Gleaner Combine(s) L (s/n 13000-earlier), L2 (s/n 13001-28000), L3 (s/n 28001-later), M (s/n 15401-earlier), M3 (s/n 25901-later), MH2 (s/n 19901-25900), MH3 (s/n 19901-25900), N5 (s/n 6101-later), N6 (s/n 7301-later), R5 (s/n 8001-later), R6 (s/n 10301-later), Replaces Gleaner OEM nos 74028110, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 451155) $15.01

No
Picture
Ring Gear, Flywheel - This ring gear is for tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. (Item #: 159150, Ref: 74001167) $77.00

Rocker Arm - For tractor models (180, 185, 190, 190XT all diesel), 200, 210, 220, 4W220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, D21. (Item #: 172654, Ref: 70277421) $75.00

Rod Bolt - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 74035395, Replaces OEM number 70277489, 4035395, (Item #: 166647) $38.10

No
Picture
Thrust Washer Set - For tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Engine Thrust Washers Set (1 set per engine). (Item #: 166977, Ref: TW426) $83.00

No
Picture
Timing Cover Seal - For tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. (Item #: 48160) $39.30

Transmission Input Shaft, Used - For Allis Chalmers tractor models 4W-220, 7010, 7020, 7040, 7045, 7060, 7080, 7580, 8010, 8030, 8070, 8550, Replaces Allis Chalmers OEM nos 70262995, Power Director Transmission, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497217) $475.01

No
Picture
Valve, Exhaust - For tractor models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, D21. (Item #: 166680, Ref: 74036609) $38.70

No
Picture
Valve Guide - For Allis Chalmers tractor models D21, 4W-220, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Compatible with Allis Chalmers Harvester (s) 860, 880, Compatible with Allis Chalmers Construction and industrial models H4, HD4, I600, TL16, 7G, 345B, 545, 545B, 615, 645B, 650, 653, 840B, Compatible with Allis Chalmers Engine (s) D2800, D2900, D3400, D3500, D3700, D3750, G2500, G2800, 433I, 433T, 649, 649I, 649T, 670H, 670HI, 670I, 670T Replaces Allis Chalmers OEM number 74022595, , Compatible with Gleaner Combine (s) F, F2, F3, G, K2, L, L2, L3, M2, M3, MH2, MH3, N5, N6, R5, R6, Replaces Gleaner OEM number 74022595, (Item #: 186207) $5.30

No
Picture
Valve, Intake - For tractor models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, D21. (Item #: 166681, Ref: 74037135) $24.10

Valve Lifter - For Allis Chalmers tractor models D21, 4W-220, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Compatible with Allis Chalmers Harvester (s) 880, Compatible with Allis Chalmers Construction and industrial models I600, 7GB, 345B, 545, 545B, 615, 645B, 650, 653, 840B, 940, Compatible with Allis Chalmers Engine (s) D2200, D2800, D2900, D3400, D3500, D3700, D3750, G2500, 433I, 433T, 649, 649I, 649T, 670H, 670HI, 670I, 670T Replaces Allis Chalmers OEM number 74026699, , Compatible with Gleaner Combine (s) F, F2, F3, G (s/n 17000-earlier), K2, L, L2 (engine s/n 70-25867-later), L3, M, M2, M3, N5, N6, R5, R6, Replaces Gleaner OEM number 74026699, (Item #: 160907) $5.30

No
Picture
Valve Rotator, Used - For Allis Chalmers tractor models D21, 4W-220, 180, 185, 190, 190XT, 210, 220, 7030, 7040, 7045, 7050, 7080, 7580, 8030, 8050, 8070 Replaces Allis Chalmers OEM nos 74028644, , Compatible with Gleaner Combine(s) L, L3, M, MH2, N5, Replaces Gleaner OEM nos 74028644, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 451274) $7.01

No
Picture
Valve Service Kit - For tractor models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, D21, D3400, D3500. Contains: springs, guides, locks, (no valves). (Item #: VSKA426) $137.77

Valve Train Kit - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7050, 7060, 7080, 8030, 8050, 8070, Compatible with Gleaner Combine (s) N5, N6, (Item #: 120233) $427.00

Engine Pistons and Sleeves

No
Picture
Piston and Sleeve Kit - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. All with D3400 or D3500 Non Mark II Diesel Engine, 426 CID 6 Cylinder, 4 1/4 inch bore. Sleeve and Piston Kit includes: sleeves, pistons, rings, pins and retainers. Complete for 1 engine. (Item #: PKA426) $1236.54

No
Picture
Piston Pin Bushing - Piston Pin Bushing. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1/4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. For 180, 185, 190, 190XT, D21. (Item #: 159774, Ref: 74025031) $13.58

Engine Rings

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, Compatible with Allis Chalmers Construction and industrial models 7G, 645B, Compatible with Allis Chalmers Engine (s) D3400, D3500, D3700, D3750, 670HI, 670I, 670T, Compatible with Gleaner Combine (s) L, L2, Bore: 4.250", Ring Size: Standard, Compression Rings per Piston: (1) @ .094" (2) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 6 cylinder set, (Item #: 174143) $176.00

Piston Ring Set - Standard - Single Cylinder - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, Compatible with Allis Chalmers Construction and industrial models 7G, 645B, Compatible with Allis Chalmers Engine (s) D3400, D3500, D3700, D3750, 670HI, 670I, 670T, Compatible with Gleaner Combine (s) L, L2, Bore: 4.250", Ring Size: Standard, Compression Rings per Piston: (1) @ .094" (2) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold per cylinder, For 6 Cylinder Piston Ring Set use Item #: 174143, (Item #: 107802) $32.40

Exhaust System

Aspirated Exhaust Stack - For Allis Chalmers tractor models 7080, 7580, 8550, Special Pipe With Aspirator, Length: 48", I.D.: 4", O.D.: 5", Painted Black, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114709) $230.00

Exhaust Manifold - For Allis Chalmers tractor models 4W-220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Compatible with Gleaner Combine (s) L, L2 (s/n 20714-later), L3 (s/n 20714-later), M, M3 (s/n 25901-later), N5 (s/n 20714-later), N6 (s/n 20714-later), R5 (s/n 20714-later), R6 (s/n 20714-later), Replaces OEM number 74036828, 74036503, (Item #: 108506) $57.00

No
Picture
Exhaust Manifold - Rear, Used - For Allis Chalmers tractor models D21, 4W-220, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 Replaces Allis Chalmers OEM nos 74036799, , Compatible with Gleaner Combine(s) L, L2, L3, M, MH2, MH3, N5, R5, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449955) $84.01

Exhaust Manifold Set - For Allis Chalmers tractor models 7030, 7040, 7045, 7050, 7060, 7080, 8030, 8050, 8070 Replaces Allis Chalmers OEM number 74036503, 74036501, 74036504, , Compatible with Gleaner Combine (s) L, L2, M, M2, N5 (with), Replaces Gleaner OEM number 74036503, 74036501, 74036504, For manifold gasket set use Item #: 101493, (Item #: 101488) $360.01

Manifold - 3 Piece for models: 7040, 7045 SN# 70-20417 and up, 7060 SN# 70-20714 and up, 7080. Gaskets NOT included. Replaces 74036827, 74036799, 74036828 (Item #: 110004, Ref: 74036828) $340.00

Muffler - Vertical muffler with aspirator tube. Overall length 49 inches, oval body, inlet 4 inch inside diameter, outlet 4 inches outside diameter. For 7080, 7580. (Item #: 100061, Ref: 70269031) $339.32

No
Picture
Muffler - Vertical Exhaust Inlet inside diameter 4 inches, outlet outside diameter 4 inches, overall length 49 inches. For 7080, 7580 Diesel with Aspirator Tube. OEM number use R1759 clamp, use R1807 rain cap. (Item #: 100061, Ref: R1575) $339.32

Turbocharger - For tractor models 7080, 7580, 8030, 8050, 8070. Replaces 74036606, 74035196, 74036395, 74062752. (Item #: 100546, Ref: 74057982) $560.00

Turbocharger - For tractor models 7030, 7040, 7045, 7050, 7060 all with model TO4B90. Includes Mounting Gaskets. BOLT ON REPLACEMENT FOR AIRESEARCH. IF REPLACING RAY JAY TURBO, LINES and AIR TUBE NEED TO BE CHANGED OR MODIFIED. Replaces 74029309, 74029207, 74036513, 74062751, 84062751, 409080-5009. (Item #: 100545, Ref: D4029309) $375.00

Fuel System / Air Intake

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Allis Chalmers it is used on Industrial: 60 (For choke cable bracket with Marvel Schebler carb # TSX591, TSX783, TSX815, TSX848, TSX853, TSX869, TSX871, TSX928), D15 (For choke cable bracket; SN: 9001 and up; with Marvel Schebler carburetor), D17 (For choke cable bracket; SN: 42001 and up; with Marvel Schebler carburetor), [ D19, 170, 175 (For choke cable bracket with Marvel Schebler carburetor) ], [ 7000, 7010, 7020, 7045, 7060, 7080, 7580 (For diesel fuel shut off cable brackets) ], [ Industrial: 500, 510, 512, 600, 612, 614, 621 (For choke cable bracket with Marvel Schebler carb number TSX591, TSX783, TSX815, TSX848, TSX853, TSX869, TSX871, TSX928) ]; Replaces: 70237169, 74047137, 29-81, B110-10 (Item #: 126116, Ref: CT29-81) $5.10

Fuel Cap - For models D21, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces: 241174, 243025, 254013, 262788, 70254013, 70262788. Includes gasket, 3.475 inch outside diameter, 2.505 inch tang to tang. (Item #: 124142, Ref: 70262788) $23.20

Fuel Cap Gasket - For Allis Chalmers tractor models D21, 190, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550, Compatible with Case tractor models C, D, L, R, S, 400, 410, 411, 412, 530 (Construction King), 531, 540, 541, 630, 640, 641, 730 (s/n 8253500-earlier), 731 (s/n 8253500-earlier), 830 (s/n 8253500-earlier), 831 (s/n 8253500-earlier), 840 (s/n 8253500-earlier), 1200, 1470, Compatible with Case Construction and industrial models W5, W7, W9, W12, Compatible with International tractor models I6, I9, M, OS6, Super M, Super MTA, Super W6, Super W9, TD6, TD9, W6, W9, 400, 450, 460, 560, 600, 606, 650, 660, Compatible with John Deere tractor models R, 80, 820 (2 cylinder), 830 (s/n 8253500-earlier), 840 (s/n 8253500-earlier), 1640 (s/n 430000-later), 2040 (s/n 350000-later), 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2255, 2350, 2355, 2555, 2750, 2755, 2940, 2950, 2955 (s/n 765516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, 3640, Replaces OEM number 01036AB, 70271531, 271531, 370520R1, 54763D, 60876D, A31101, R481R, Rubberized Cork, ID: 2.242", OD: 2.948", (Item #: 150648) $3.98

No
Picture
Fuel Filter Base, Used - For Allis Chalmers tractor models 6060, 6070, 6080, 7010, 7020, 7045, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, 9455, 9630, 9635, 9650, 9655, 9670, 9675, 9690, 9695, Replaces Allis Chalmers OEM nos 74036098, Replaces Allis Chalmers Casting nos 4028803, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453511) $55.01

Fuel Filter Clamp, Used - For Allis Chalmers tractor models 200, 7000, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 9150 Replaces Allis Chalmers OEM nos 74024237, , Compatible with Gleaner Combine(s) L, L2, L3, M, M2, M3, N5, N6, N7 Replaces Gleaner OEM nos 74036495, , Compatible with John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3020, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7420, 7600, 7700, 7800, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 4400, 4420, 4425, 4435, 6600, 6600 SH, 6620, 6620 SH, 6622, 7700, 7720, 8820, 9400, Compatible with John Deere Harvester(s) 484, 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 7440, 7445, 7450, 9900, 9910, 9920, 9930, 9940, Compatible with John Deere Hay Cutting(s) 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000 Replaces John Deere OEM nos R57258, R66821, R47358, , Compatible with New Holland Combine(s) TR70, TR75, TR85, TR86, TR87, TR95, TR96, TR97, Compatible with New Holland Harvester(s) 1890, 1895, 1900, 1915, 2100, 2115, Compatible with New Holland Bale Movers(s) 1068, 1069, 1078, 1079, 1085, Compatible with New Holland Baler(s) 1426, Compatible with New Holland Hay Cutting(s) 1100, 1116, 1495, 1496 Replaces New Holland OEM nos 703629, , Compatible with Oliver tractor models 1855, Compatible with White tractor models 2-70, 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180, 4-150, 4-175, 4-180, 4-210, 4-225, 4-270, Replaces White OEM nos 20-0006801, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430381) $19.01

Fuel Filter, Metal Body - For tractor models 7000, 7020, 7030, 7040, 7045, 7060, 7080, 7580. (Item #: 111141, Ref: 74036432) $37.40

Fuel Shut Off Cable - For Allis Chalmers tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, Replaces Allis Chalmers OEM number 70262489, Overall Length: 75-1/2", Mount to Mount: 72", (Item #: 153599) $28.62

Gauges

Oil Pressure Switch - Know if you lose oil pressure when it happens. This switch is used with 240837 Dash Warning Light. This switch is used on Allis Chalmers models: D21, 180, 185, 190, 190XT, 200, 210, 220, 4W305, 7000, 7030, 7040, 7050, 7060, 7080. Replaces Allis Chalmers part numbers 74020666, 74021445 (Item #: 162437, Ref: 74021445) $20.00

Hydraulic System

Pump Control Knob - Plastic Knob, 3/8 inch fine thread. For tractor models 170, 175, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070. (Item #: 126604, Ref: R4572) $5.50

Remote Valve Assembly, Used - For Allis Chalmers tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, Replaces Allis Chalmers OEM number 70269700, Replaces Casting nos 265706, Valve with threads, Check if customer is replacing valve with threads, Valve with out threads use Item #: 433248, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496753) $275.01

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces 239804, 1164605, 70239804, 71164605 (Item #: 111242, Ref: 28A116) $14.00

Headlight, Less Glare Guard - Fender mounted, wires come through rear stud. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. (Item #: 105301, Ref: 70267185) $33.00

Headlight Washer - Used with light part number 164089AS. For the following tractors: (170, 175, 180, 185, 190, 190XT all with flat top fenders), 200, 7000, 7030, 7040, 7050, 7060, 7080. (Item #: 154899, Ref: 504781M1) $5.30

Headlight, with Glare Guard - Fender mounted, wires come through rear stud. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. (Item #: 160751, Ref: 70249146) $113.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Used on Allis Chalmers Combines: A, C, E, EIII, F, K, L, L2, M, M2. Tractors : D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 5040, 5050, 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 230232, 70232232, 70276858, 70230232. (Item #: 111241, Ref: 373662R91) $10.10

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.00

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $26.80

Sealed Beam Bulb, 12 Volt - Hi/Low, 4-1/2 inch diameter. For tractor models 5040, 5045, 5050, 6040, 6060, 6070, 6080, 7000, (7010, 7020 less cab), 7030, 7040, 7045, 7050, 7060, 7080. (Item #: 124720, Ref: 70268648) $26.80

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black. For tractor models 7030, 7040, 7050, 7060, 7080All with Maroon Belly. (Item #: 112807, Ref: R1201) $239.00

No
Picture
Cab Glass - Rear Window, Used - For Allis Chalmers tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550, Replaces Allis Chalmers OEM number 70577185, 70575473, A: 31", B: 33", C: 40", D: 33", For a new version of this item use Item #: 108503, Item ships via freight carrier, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435393) $282.01

Weather Strip Seal, Door and Window - 244" - For Allis Chalmers tractor models 200, 210 (Cab Door), 220 (FWA, Cab Door, Laporte Door), 220 (Cab Door), 6060, 6070, 6080 (Cab Door, Rear Window), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010 (Rear Window), 8030 (Rear Window), 8050 (Cab Door, Rear Window), 8070 (Cab Door, Rear Window), 8550 (Cab Door), Replaces Allis Chalmers OEM number 79011812, Length: 244", (Item #: 162774) $61.00

Paint

No
Picture
Paint, Allis Orange, 1 Gallon - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100110, Ref: TP280GAL) $59.00

No
Picture
Paint, Cream, 1 Gallon - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108324, Ref: TP270GAL) $65.00

No
Picture
Paint, Cream, 1 Quart - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108323, Ref: TP270QT) $33.70

No
Picture
Paint, Cream, Spray Can - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108322, Ref: TP270SP) $10.50

No
Picture
Paint, Persian Orange #2, 1 Gallon - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108317, Ref: TP285GAL) $51.00

No
Picture
Paint, Persian Orange #2, 1 Quart - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108316, Ref: TP285QT) $24.60

No
Picture
Paint, Persian Orange #2, Spray Can - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108315, Ref: TP285SP) $8.80

PTO / Driveline

PTO Brake Adapter, Used - For Allis Chalmers tractor models 4W-220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM nos 70265521, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497002) $163.01

No
Picture
PTO Brake Friction Plate - For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550. PTO Brake Friction Plate. (Item #: 70270199) $38.05

No
Picture
PTO Clutch Drive Plate - 6 inch outside diameter, 3.625 inch inside diameter, 28 teeth. For tractor models (quantity used): 180 (6), 185 (6), 190 (8), 190XT (8), 190XT III (8), 200 (8), 4W220 (5), 4W305 (7), 7000 (3), 7010 (4), 7020 (4), 7030 (4), 7040 (4), 7045 (5), 7050 (4), 7060 (5), 7080 (5), 7580 (5), 8010 (4), 8030 (4). (Item #: 164440, Ref: 70256524) $34.30

PTO Clutch Spring Washer - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, 8550, (Item #: 168155) $6.98

PTO Plate - For Allis Chalmers tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70269732, Inside Diameter: 7.25", Outside Diameter: 12.74", (Item #: 164205) $172.00

Seats

Seat Back - Black Vinyl on Steel For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. Replaces 70255581, 70255581-1 (Item #: 101203, Ref: 70255581) $226.00

Seat Shock Absorber - Compatible with Allis Chalmers Tractors: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580. Replaces Allis Chalmers OEM nos 70227917, 227916, 227917, 70227916. Includes Shock, Spring, Retainers, Collar and Bushings. 11-3/4 iches center to center when extended, 8-1/8 inches center to center when compressed. (Item #: 105315) $112.00

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Sheet Metal / Body Parts

Cab Interior Kit - 16 Piece kit for: 7000, 7010, 7020, 7030, 7040, 7050, 7060, 7080. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112808, Ref: CKAC7000WP) $314.00

No
Picture
Step and Tool Box - For Allis Chalmers tractor models 7000 (mounting bracket 114420 required), 7030, 7040, 7050, 7060, 7080, Tough all steel removable and lockable toolbox and step combination, Dimensions: 23" x 10" x 7", Comes primered (color may vary). Prior to painting check fitment, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114419) $392.00

Suitcase Weight, 100 lbs., Used - For Allis Chalmers tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, Replaces Allis Chalmers OEM nos 70269780, New Style 100 lb. Weight, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499297) $110.01

Steering

Rubber Dust Cover For Tilt Steering Wheel - The measurements on this Dust Cover are 2.498 inch outside diameter and 1.350 inches tall. Replaces 30-3346595, 30-3080080, 10A30798, 10A23441, 30A158, 70266946. Used on Allis Chalmers: 200, 7000, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580 (Item #: 115580) $26.10

Seal Kit - For Allis Chalmers tractor models D21, 170, 175, 180 (s/n 12800-earlier), 185 (s/n 12800-earlier), 190, 190XT, 200, 440, 7020, 7030, 7040, 7045, 7050, 7060, 7080 Replaces Allis Chalmers OEM number 70239229, 70239192, , Compatible with Gleaner Combine (s) E3 (s/n 25001-later), F (s/n 12201-earlier), G (s/n 17001-earlier), K (s/n 24200-earlier), (Item #: 168995) $12.20

Spindle Bushing, Lower - For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 128509, Ref: 70267222) $21.60

Spindle Bushing, Upper - For tractor models 210, 220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070, D21. (Item #: 128508, Ref: 70239452) $17.10

Spindle, LH - This spindle vertical shaft is 11.625 inches long and measures 1.867 inches diameter at the top and 2.437 inches diameter at the base. For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. This spindle uses wheel bearing kit part number WBKAC4. (Item #: 100096, Ref: 70267779) $422.00

Spindle, RH - This spindle vertical shaft is 11.625 inches long and measures 1.867 inches diameter at the top and 2.437 inches diameter at the base. For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. This spindle uses wheel bearing kit part number WBKAC4. (Item #: 100097, Ref: 70267780) $393.00

Spindle Thrust Washers - For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 167995, Ref: 70267296) $12.50

Steering Arm - 1.867 inch diameter. Keyed hole fits either right or left hand. For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 100107, Ref: 70265087) $132.00

No
Picture
Steering Wheel - 15-3/4 inches in diameter, 36 spline, 7 inches deep. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7030, 7040, 7050, 7060, 7080, 7580. Replaces 256852, 1142487. (Item #: 113315, Ref: 242933) $65.00

Steering Wheel - Diameter 15 inch, 13/16 inch hub, 36 spline, 4.5 inch dish. For tractor models 6060, 6070, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550. Replaces OEM 71142487 and 70256852. (Item #: 110017, Ref: S.65515) $64.00

Steering Wheel Cap - Use with 242933 steering wheel. For tractor models 170, 180, 185, (190 from serial number 2485), 190XT, 200, 210, 220, 440, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7045, 7060, 7080, 7580. (Item #: 71362581) $31.13

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Tie Rod, Inner - 4.946 inches long from zerk to end, 1.125 inch diameter. For tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 all with heavy duty axles. (Item #: 100086, Ref: 70265527) $29.20

Tie Rod, Outer - 21.00 inches long from zerk to end, 1.50 inch diameter. For tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 all with heavy duty axles. (Item #: 100087, Ref: 70269353) $78.00

Tie Rod Tube with Bracket - For 7000, 7010, 7020, 7040, 7045, 7060, 7080, 8010, 8030, 8050, 8070. Tie Rod Tube with Bracket. (Item #: 104293, Ref: 70269325) $270.00

Wheels

Bar Clamp - Wheel clamp, disc to rim. For power shift rear wheels. Serial number 42001 and up. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 5045, 5050, 6060, 6070, 6080, 6140, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, D15, D17. Replaces 70235676 (Item #: 124526, Ref: 898021M1) $18.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $112.00

Front Wheel Hub, 8 Bolt - 5/8 inch hole diameter x 2 inch spacing. For tractor models 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070, D21. Replaces 242599, 265166. (Item #: 100103, Ref: 70265167) $90.00

Lug Bolt - Verify size before ordering. Many tractors use more than one size. This Lug Bolt measures 5/8 inch by 18 thread. The overall lenght is 1.5 inches. The thread lenght is 1.38 inches. Replaces 98A561LB (Item #: 108604) $4.50

Power Adjust Rim Clamp - For Allis Chalmers tractor models D15, D17 (s/n 42001 - later), 160, 170 (with 28" rims), 175 (with 28" rims), 180 (with 28" and 30" Rims), 185 (with 28" and 30" Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28" and 34" Rims), 6070 (with 28" and 34" Rims), 6080 (with 28" and 34" Rims), 6140 (with 28" rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, Replaces Allis Chalmers OEM number 70235676, (Item #: 118628) $15.00

Power Adjust Rim Clamp, Used - For Allis Chalmers tractor models D15, D17 (s/n 42001 - later), 160, 170 (with 28" rims), 175 (with 28" rims), 180 (with 28" and 30" Rims), 185 (with 28" and 30" Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28" and 34" Rims), 6070 (with 28" and 34" Rims), 6080 (with 28" and 34" Rims), 6140 (with 28" rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, Replaces Allis Chalmers OEM number 70235676, For a new version of this item use Item #: 118628, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 418628) $10.01

Rim Clamp, Used - For Allis Chalmers tractor models D21, 4W-220, 4W-305, 170, 175, 190, 200, 210, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, 8785 Replaces Allis Chalmers OEM nos 70235525, , Compatible with Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155, 1505 (1805), 1805, 2675, 2705, 2745, 2775, 2805, 3090, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 4800, 4840, 4880, 4900, 6190, 8120, 8140, 8150, 8160, Replaces Massey Ferguson OEM nos 507773M1, Replaces Casting nos 507773, For Non Power Adjust Rims, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497035) $15.01

No
Picture
Sleeve and Seal Kit, Wheel Bearing - For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 111907, Ref: 70268132) $16.50

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Wheel Bearing Kit - Kit includes 1 each of 14274 (Cup), 14138A (Cone), LM104912 (Cup), LM104949 (Cone), 70268132 (seal and wear sleeve). Replaces 268904. For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 100101, Ref: WBKAC4) $43.70

Wheel Hub, Used - For Allis Chalmers tractor models D21, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70265167, 242599, 265166, 265167, 70242599, 70265166, Replaces Casting nos 265168, 8 bolt, For a new version of this item use Item #: 100103, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400103) $41.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Item #: 183055, Ref: R4634) $13.80

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Item #: 183122, Ref: R4633) $11.60

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Item #: 183053, Ref: R4632) $9.60

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Item #: 183049, Ref: R5234) $2.50

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Item #: 100153, Ref: R0675) $3.40

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Item #: 100154, Ref: R0676) $8.50

AC Logo Decal - 24 inches long, Black and Orange. (Item #: 183479, Ref: R0677) $26.80

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Item #: 100163, Ref: R5168) $3.40

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Item #: 100152, Ref: R5169) $10.00

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Item #: 183047, Ref: R5233) $22.90

No
Picture
Power Shift Decals - One pair, white. For the cab on some Allis models. (Item #: 183474, Ref: R0674) $26.80

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Item #: 105281, Ref: D4PE12029AA) $15.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

Spark Plug - Fits all models 1953 thru 1975 using 1/2" reach, 7/8" heck size. (Item #: 113918, Ref: AL3116) $4.90

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

NOTE

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

$Allis Chalmers 7080 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Allis Chalmers 7080 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Allis Chalmers 7080 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Allis Chalmers 7080 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Allis Chalmers 7080 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Allis Chalmers 7080 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Allis Chalmers 7080 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.75 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.50

$Allis Chalmers 7080 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H. Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Orange - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161192) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100109, Ref: TP280QT) $23.30

No
Picture
Paint, Allis Orange, Spray Can - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100108, Ref: TP280SP) $7.80

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Universal - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012) $58.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.20

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00