FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers C Tractor Parts

[Categories] [All Allis Chalmers Models] [Print]

Brakes

Brake Adjusting Screw - Zinc Plated, 7/16 inch 20 NF x 3 inches long. For tractor models B, C, CA. (Item #: 125734, Ref: 70213375) $23.30

Brake Band Assembly - Complete lined brake band for one wheel (without bolt). For B, IB, C, CA. (Item #: 105397, Ref: 70276965) $43.00

Brake Drum - For tractor models B, IB, C, CA. 1 used with Final Drive Clutch. Dimensions 1.375 inch bore, 2.880 inches wide, 5.969 inch diameter. (Item #: 105405, Ref: 70205527) $80.00

Brake Lining - Set of 2 Brake Shoe Linings with Rivets for one wheel. For tractor models IB, B, C, CA, R. Thickness measures .185 inch. (Item #: 105401, Ref: 70276944) $12.50

Brake Pivot Pin - .750 inch diameter x 1.625 inch long. For tractor models B, C, CA. (Item #: 125751, Ref: 70207221) $7.40

Brake Shoe Return Spring - For tractor models B, C, CA. Replaces: 70207320, 207320. 3 1/2 inches overall length. 2 used per tractor. Sold individually. (Item #: 115846, Ref: 70207320) $15.00

Hand Brake Knob - Plastic Knob, 3/8 inch fine thread. For tractor models B, IB, C. Diameter of knob may vary. (Item #: 126604, Ref: R4572) $6.00

Clutch

Clutch Disc, 8.5 Inch - SOLID, spline diameter 1.125 inch, 10 spline. For tractor models B, B125, B15, C, CA, IB. (Item #: 189706, Ref: 70226729) $88.00

Clutch Disc, 8.5 Inch - New Spring Loaded Disc is 10 spline with 1.125 inch diameter. (Item #: 130148, Ref: 70226730) $93.00

Clutch Disc, 9 Inch - This clutch disc has 1-1/8 hub, 10 spline. For tractor models B, C, CA, (D10 up to serial number 3500), (D12 up to serial number 3000), D14, D15. This is not interchangeable with A44512 as the hub is different. (Item #: 172922, Ref: 70232239) $121.00

Clutch Disc, 9 inch Organic - Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Replaces 207784 and 70207784. For models B, C, CA, D10, D12, D14, D15, H3, HD3, I400, I600 and IB. This part is not interchangeable with 70232239 as the hubs are different. (Item #: 119397, Ref: A44512) $60.00

Clutch Disc, Remanufactured, 70207784 - For Allis Chalmers tractor models B, C, CA, D10 (s/n 3501 - earlier), D12 (s/n 3001 - earlier), D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70207784, 70230099, 70231976, 70232239, 70236105, 70236120, 70236122, 70247744, 70253187, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 204569) $133.00

Clutch Disc, Remanufactured, 70214320 - For Allis Chalmers tractor models B, C, CA, Replaces Allis Chalmers OEM number 70214320, 70226729, 70226730, Clutch Size: 8-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206299) $87.00

Clutch Inspection Plate - Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Item #: 126139, Ref: 208465) $20.40

Clutch Kit - This new single clutch kit contains a 8 1/3 inch pressure plate assembly (70226262), a 8 1/2 inch spring loaded, woven disc with a 10 spline, 1 1/8 inch hub (70226730), and new release bearings (70204829 and 70235079). For Tractors B, C, CA. (Item #: 182995, Ref: 70226262K) $410.00

Clutch Kit - Kit includes 9 inch clutch disc (10 spline 1 1/8 inch hub) 70207784, pressure plate 70216965, release bearing 70235079, alignment tool and pilot bearing 6203-2RS. Used on B, C, CA, D10, D12, D14, HD3 Crawler, HD4 Crawler. (Item #: 119875, Ref: 1612-1008) $157.00

Clutch Kit, Remanufactured - For Allis Chalmers tractor models B, C, CA, Clutch Diameter - 8-1/2", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 8-1/2', Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Type - Single Stage, (Item #: 202029) $247.20

Clutch Pedal Return Spring - This Clutch Pedal Return Spring fits Allis Chalmers B (serial number 101 to 124037), C, CA (Up to serial number 30611), IB (up to serial number 2836). It replaces original part numbers 207941, 225646, 70207941 and 70225646. This Clutch Pedal Return Spring measures 4.300 inches overall length. The body diameter measures 0.750 inch and the wire diameter measures 0.100 inch. (Item #: 126165, Ref: 70225646) $21.50

Clutch Pilot Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the following models: B, IB, C, CA, D10 (up to serial number 3501), D12 (up to serial number 3001), D14, D15, and H3. Replaces 206968, 228188, 228255, 70206968, 70228188, 70228255. (Item #: 122000, Ref: 364527R91) $9.30

Clutch Release Throw Out Bearing - Greaseable - Compatible with Allis Chalmers Construction & Industrial(s) HD3, HD4. Compatible with Allis Chalmers Tractor(s) B, C, CA, D10, D12, D14, D15, D17, D19, 180, 185, 190, 190XT, 200. Replaces Allis Chalmers OEM nos 70235079 (Item #: 113482) $19.10

Pressure Plate, 8.5 Inch - New Pressure Plate. For tractor models B, B125, B15, C, CA, IB. (Item #: 166220, Ref: 70226262) $197.00

Pressure Plate, 9 Inch - Rockford Style. For tractor models B, C, CA, D10 serial number less than 3501, D12 serial number less than 3001, WF. (Item #: 118719, Ref: 70228926) $93.00

Pressure Plate Assembly, Remanufactured, 70216965 - For Allis Chalmers tractor models B (s/n B-7133-earlier), C, CA, D10 (s/n 3501 - earlier), D12 (s/n 3001 - earlier), D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70216965, 70228926, 70247745, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 118719, (Item #: 206372) $117.00

Pressure Plate, Remanufactured, 70216805 - For Allis Chalmers tractor models B, C, CA, Replaces Allis Chalmers OEM number 70216805, 70226262, Pressure Plate Size: 8-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, (Item #: 204490) $114.01

Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Item #: 107007, Ref: N1087) $18.50

Release Bearing - For tractors: B, IB, WC, WF, WD, WD45, WD45D, D10 (serial number 3501 and up), D12 (serial number 3001 and up), D17 (prior to serial number 75000), D19. Measures inside Diameter 2.062 inches and Outside Diameter 3.375 inches.Replaces 70204829 (Item #: 100022, Ref: 361292R91) $25.70

Cooling System

Belt - This Fan Belt measures 1/2 inch wide and 48 5/8 inches long. For Diesel models 170, A, A2, C, D19, WD45. Verify measurements before ordering. (Item #: 123127, Ref: 378113R2) $6.70

Fan Belt - This Fan Belt measures 36.562 inches length and 0.656 inch width, for the B, IB, C, CA, D10 up to serial number 3501, D12 up to serial number 3001 and D14. Also Replaces 209656. Please verify measurements before ordering (Item #: 117363, Ref: 70209656) $13.80

Radiator - Pressurized. For tractor models B, C, CA, D10 and D12 - VERIFY OEM PART NUMBER. Core is 15 inches wide x 14.2 inches high. Also replaces 70233232, 7023313 and 70233290. (Item #: 101663, Ref: 70214337) $200.00

Radiator Cap - Allis Chalmers, 228545, 228722, A39359, A45176, G45179 - For Allis Chalmers tractor models B (s/n 61221-later), C (s/n 18580-later), CA, D10, D12, D14, D15, D17, D19, D21, G, WC (s/n 74430-later), WD, WD45, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Compatible with Allis Chalmers Construction and industrial models H3, HD3, I40, I60, I400, I600 Replaces Allis Chalmers OEM number 70228545, 70228722, 70228817, 70254891, , Compatible with Case Construction and industrial models W3, 210B, 310, 320, 430, 430CK, 480, 480B, 480C, 480CK, 530, 530CK, 545, 580, 580B, 580BCK, 580C, 580CK, 584, 584C, 585, 585C, 586, 586C, Replaces Case OEM number A39359, A45176, G45179, Chrome Plated, 2.239" Inner cap I.D, 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area, 4 PSI (for pressurized systems), (Item #: 113099) $27.00

Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Item #: 110011, Ref: 70254891) $7.00

Radiator Cap, With Lever - Original style. For tractor models B, C, CA, G, WC Styled, RC, WF Styled, WD, WD45. DOES NOT FIT our radiator 70214337. Only fits original early models with UNPRESSURIZED system radiator. Also used as a gas cap for some applications. (Item #: 111025, Ref: 70207244) $29.50

Radiator Hose, Lower - Inside diameter 1.250 inch. For tractor models B, C, CA, D10, D12, D14. (Item #: 108009, Ref: 70207173) $3.00

Radiator Pipe, Lower - For tractor models B, C, CA, IB, RC. Metal. 1-1/4 inch outside diameter X 10 inches. Replaces 70227184, 225912, 70225912. (Item #: 178702, Ref: 227184) $40.00

Thermostat - 180 degree. For tractor models 170, 175, B, C, CA, D14, D17, WD, WD45. All with gas engines. (Item #: 110455, Ref: 70229927) $20.80

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: B with engine serial number 126210 and up, when equipped with water manifold bypass. Models: C and CA with engine serial number 195136 and up, when equipped with water manifold bypass. Models: D10, D12, D14, D15, D17, I40, I400, I60, I600, WD45, 170, and 175 gas or LP. This thermostat does not come with a gasket. Replaces part numbers 226505, 229927 70229927. (Item #: 110010, Ref: R1852) $39.00

Thermostat, 160 Degrees - This is a 160-degree thermostat. Used on Allis Chalmers B with engine serial number 126210 and up, using 4 bolt thermostat housing, C with engine serial number 60157 and up, using 4 bolt thermostat housing, CA with engine serial number 195136 and up, using 4 bolt thermostat housing, D10 Gas, D12 Gas, D14 Gas, D15 Gas, D17 Gas, WD45 Gas, I400 Gas, I60 Gas, I600 Gas, 170 Gas, 175 Gas, H3 Gas. Replaces 1002521M91, 185201M2, 226372, 228543, 70226372, 70228543, 830873M93, A11493, A28114, TG10608 (Item #: 150677, Ref: 226372) $23.40

Water Pump - For tractor models A, B, C, CA. Without bypass hole. REPLACES OEM number 79003713-R. (Item #: 113327, Ref: 79003713) $109.00

Water Pump Gasket - This is the backing plate to block gasket used with 79016821 water pump. It replaces 70207820, 70207001 (Item #: 153391, Ref: 70234382) $5.10

Water Pump Gasket - Pump to Plate - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70207832, Pump to Plate, (Item #: 153390) $7.70

Water Pump Gasket Pump to Plate - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70210830, Pump to Plate, For water pump use 104189, (Item #: 153401) $0.98

Water Pump, Remanufactured, 70226497, A105181 - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, IB, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70226497, 70250397, 70277280, 79003713, 79004255, Replaces Allis Chalmers Casting number A105181, 126035, Includes mounting gasket, Without Pulley, (Item #: 206404) $99.01

Water Pump, Threaded Port Type - This water pump includes back plate 70207820and back plate to water pump gasket 70207832. This water pump comes WITHOUT back plate to block gasket and WITHOUT pulley. If gasket is needed, order part number 70234382. For tractor models B, C, CA, D-10, D-12, D-14. This water pump has a threaded bypass hole. If you are not using a bypass, you may need to find a threaded plug. Plug shown is not always included. Also Replaces 250397, 79016821, 70250397. (Item #: 104190, Ref: 79016821) $75.00

Decals and Emblems

$Allis Chalmers C Decal, 2-1\2 inch Diamond, Blue Background, Mylar$
Decal, 2-1/2" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" Blue Background, Mylar decal, (Item #: 100149) $3.80

$Allis Chalmers C Decal, 2-1\2 inch Diamond, Orange Background, Mylar$
Decal, 2-1/2" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" with Orange Background, Mylar decal, (Item #: 100148) $3.80

Decal, 6" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Blue Background, Mylar decal, (Item #: 100147) $5.60

Decal, 6" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Orange Background, Mylar decal, (Item #: 100146) $5.60

Decal, Black with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, Black lettering with long A and S, 22-1/4" Long, Mylar decal, (Item #: 100142) $9.30

No
Picture
Decal, Blue with Border, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers w/Border, Blue, Mylar decal, (Item #: 100145) $9.30

Decal, Blue with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, W/O Border, Long A&S, Blue, Mylar decal, (Item #: 100143) $9.30

Decal Set - For model C. BLUE Set of 13 self adhesive decals. These are printed on Mylar, not die cut. (Item #: 182679, Ref: ACC) $36.90

Decal Set - For model C. Dress up that old work partner with a set of 13 self-adhesive decals. These are printed on Mylar, not die cut. (Item #: 100137, Ref: ACCB) $45.90

No
Picture
Decal Set - Vinyl - Complete for C. VINYL Blue Letters WITH LONG A and S Decal Set. Vinyl sets are individual letter/numbers sets. Not full sheet type. (Item #: 100199, Ref: R0757V) $78.00

No
Picture
Decal Set - Vinyl - Complete for C. VINYL Black Letter Decal Set. Vinyl sets are individual letter/ numbers sets. Not full sheet type. (Item #: 100184, Ref: R0761V) $78.00

$Allis Chalmers C Decal, Triangle, Black and Orange with White Background, 1-1\2 inch x 1-1\2 inch, Mylar$
Decal, Triangle, Black and Orange with White Background, 1-1/2" x 1-1/2", Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, 1 1/2" x 1 1/2", Black and orange on white background, Mylar decal, (Item #: 100162) $2.80

Diamond Decal, 6" Clear, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Clear Background, Mylar decal, (Item #: 100173) $5.60

Drive Train

Final Drive Pan Gasket - For tractor models B, C, CA, D10, D12, D14, D15, ED40, I60, I500, I600. Two used per tractor. Sold individually. Replaces 70233186, 70225103. (Item #: 178092, Ref: 70205515) $17.90

Front Transmission Main Shaft Seal - This front transmission main shaft seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: B, C, IB, CA. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351, CR11801 (Item #: 169955, Ref: 471765) $9.10

Gear Shift Boot - This is an Original Style Gear Shift Boot. For Allis-Chalmers models B, C, CA, WC, WD, WD45, D10, D12, D14, and D15. (Item #: 107809, Ref: R4457) $9.50

Gear Shift Knob - This Gear Shift Knob has a 0.400 inch inside diameter hole. Fits B, C, WD, WD45, D10, D12, D14, D15, D17, D19, D21. Replaces: 226023, 70226023 (Item #: 121931, Ref: 226023) $6.80

Gear Shift Lever Pins - These Standard Gear Shift Lever Pins are 0.325 inches wide on the square end and 0.250 inch round pin diameter. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 203465, 70203465. Price is for two. (Item #: 153119, Ref: 70203465) $11.60

Gear Shift Lever Pins, Oversize - These OVERSIZE Gear Shift Lever Pins are 0.375" wide on the square end and 0.285" round pin diameter. They are used to tighten up worn shift lever and must be ground to fit the existing worn lever. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 218859, 70218859 Price is for two. (Item #: 180156, Ref: 70218859) $16.00

Gear Shift Lever Pins - Pair - For Allis Chalmers tractor models B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70203465, 203465, Pin Measures 0.325" Wide Square End, 0.285" Round Pin Diameter, Used to "tighten up" worn shift lever., Must be ground to fit existing worn lever., Sold in pairs, For Standard Size Pins use Item #: 153119, (Item #: 129236) $15.50

Gear Shift Lever Washer And Snap Ring Kit - This Gear Shift Lever Washer and Snap Ring Kit retains the gear shift lever into the housing. It measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. Fits: B, C, CA, D10, D12, D14, D15, ED40, G, WC, WD, WD45, WF. Replaces retainer: 207772, 70207772 and snap ring: 207771, 202875, 70202875. (Item #: 129237, Ref: 70202875) $15.60

Inner Upper Final Drive Shaft Seal - This inner upper final drive shaft seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: B, C, IB, CA, D14 to serial number 19001. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351, CR11801 (Item #: 169955, Ref: 471765) $9.10

Outer upper final drive shaft seal - This outer upper final drive shaft seal has a 1.375 inch Inside Diameter, a 2.72 inch Outside Diameter and is .468 inch wide. It Fits: B, C, CA, ED40, IB. Replaces: 206449, 70206449, 450456 (Item #: 179385, Ref: 70206449) $26.80

Rear Axle Oil Seal - For tractor models B, B125, C, CA, IB. Outside diameter 3.5 inches. Inside diameter 2.5 inches. 7/16 inches thick. (Item #: 151917, Ref: 70206450) $15.50

Electrical System

Alternator Bracket Kit - This Alternator Bracket Kit fits tractor models B, [C, CA must trim 1 inch off lower end of adjustment bracket and re-drill hole to clear draglink], [D10, D12, D14 lower bracket only], IB. Use with 8NE10305SE alternator and existing belt. (Item #: 178916, Ref: ACS2347) $61.00

Battery Box Lid - For Allis Chalmers tractor models B, C, CA, D10, D12, G, WD, WD45, Replaces Allis Chalmers OEM number 70210907, 210907, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126449) $40.10

Battery Box Side Cover - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, G, WD, WD45, Replaces Allis Chalmers OEM number 70222525, 2222525, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126450) $47.87

No
Picture
Brush - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, WD, WD45, Volts: 6, Quantity: 4 required, (Item #: 176922) $0.60

Coil, Wico - This Magneto Coil is for Wico Model X series magnetos. Fits models B, C, RC, WC, WD, WF. (Item #: 111196, Ref: AR12006) $99.00

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models B, C, (CA engine serial number CE-149840 and up), D10, D12, D14, D15, D17, (WC, WD, WD45 serial number 136318 and up). Replaces Delco 811735 and 70225733. (Item #: 104554, Ref: 1750411M91) $8.50

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC. Replaces 225734 and 70225734. (Item #: 103153, Ref: 1900119) $9.00

Distributor, Rebuilt - For tractor models B, C, CA, WC, WD, WD45, WF and D14 all 1111735, 1111411 or 1111745 labeled distributor. A refundable $75.00 core charge will be added to the price. (Item #: 203555, Ref: 1111411) $265.01

Distributor, Remanufactured, Wico, XB4000 - For Allis Chalmers tractor models B, C, CA, D10, D12, RC, U, UC, WC, WD, WD45, Compatible with Minneapolis Moline tractor models R, Z, Replaces Wico manufacturer number XB4000, Includes distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, This is to change over from a magneto to a distributor, Fits 4 cylinder tang drive, (Item #: 204528) $295.01

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits tractor models B, C, IB, RC, WC, WD, WF, CA, D10, D12, D14, D17, D19, G, WD45, D15, H3, I40, I400, I500, I60, I600. With 1112461, 1112601, 1112655 1111411 or 1112607 Delco Distributor and Clip Held Cap. Replaces: bushing: 225773, 70225773, 0.005 inch shim washer: 225797, 70225797, 0.034 inch washer: 250977, 70250977, 0.010 inch shim washer: 4050123, 74050123. (Item #: 178103, Ref: ABC3007) $29.50

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Allis Chalmers with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. Replaces: 225791, 225792, 225793, 225794, 225795, 70225791, 70225792, 70225793, 70225794, 70225795 (Item #: 111468, Ref: 1904376) $14.40

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - This Electronic Ignition Kit is for Delco Distributors in the below listed models. Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. Compatible with all 12-volt negative ground systems and 6-volt systems that have been converted to 12-volt negative ground. For tractor models G, B, C, CA, WC, WD, WF, WD45, D10, D12, D14, D15 and D17. NOTE: On those models that use a Distributor Dust Shield, you may be required to drill a larger hole in the Dust Cover for the Electronic Parts to fit properly. (Item #: 105071, Ref: 1142) $155.00

Fairbanks Morse, Condenser - Services Fairbanks Morse Magneto: J1A, XCE1B, J1B, XYE1B88F, JE1A, X1-2B, J2A, XF2A, JF2A, XF2A, J2B, XF2B, JF2B, X4A, J4A, X4B, JG4A, XV4C73, J4B, XR4A, X1A, XR4B, X1B, K2A. Tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 111101, Ref: AXMR2433) $8.00

Fairbanks Morse, End Cap Cover - Services Fairbanks Morse Magneto: FM-J4, FM-OX4, FM-B1 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 105665, Ref: C800) $86.00

Fairbanks Morse, End Cap Less Gear - Services Fairbanks Morse Magneto: FM-JF2, FM-J4 magnetos. Tractors: B, C, CA, WC, RC, WD, U, UC. (Item #: 185930, Ref: CX2430) $103.00

Fairbanks Morse, Gear with Shaft - Fits cap CX2430, for Fairbanks Morse Magneto: FM-JF2, FM-J4 magnetos. Does have timing marks. For tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 178586, Ref: N5939) $67.00

Fairbanks Morse, Molded Coil - Services Fairbanks Morse Magneto: FM-JE4, FM-X4, FM-XE4 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 105656, Ref: R2477C) $77.00

Fairbanks Morse, Point Set - Services Fairbanks Morse Magneto: FM, FM-H, FM-K, FM-OH, FM-R magnetos. On tractors, B, C, CA, RC, WC, WD, U, UC. (Item #: 172889, Ref: P2437) $61.00

Fairbanks Morse, Rotor - Services Fairbanks Morse Magneto with 2 piece cap: FM-J4, JV4, XV4 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 111307, Ref: M2765) $14.90

Generator Bracket - Lower - For Allis Chalmers tractor models B, C, CA, D10 (s/n 3500-earlier), D12 (s/n 3000-earlier), D14, Replaces Allis Chalmers OEM number 70210990, Length 6.080, Width 1", Thickness 0.250, 2 Holes -0.375 O.D., 2 Holes- 0.340 O.D., (Item #: 126570) $25.90

Generator Cutout Assembly - Voltage Cut-out (6 Volt), Allis Chalmers: Fits: B, C, CA, RC, WC, WD45, WF. (Item #: 105283, Ref: 1500199M91) $21.10

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit for a Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For: A, B, CA, G, WD, WD45, D10, D12, D14, D15, D17, D19, C, E, F, 60, 66, 72, 90, WF, I40, I400, I500, I60, I600, H3. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1112593, 1111708. (Item #: 103151, Ref: ATK1DCR) $9.50

Ignition Switch - Ignition Switch, with Keys. For tractor models with distributor ignition. Models: B, C, CA, D14 To Sn: 9500, WD, WD45. Replaces 225310, 70225310 (Item #: 105687, Ref: 8N3679C) $7.50

Magneto Cap - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH3001 and XB2065 Magnetos. (Item #: 182830, Ref: FXG2002A-2) $75.00

Magneto Cap - For Allis Chalmers tractor models B, C, CA, RC, U, UC, WC, WD, WF, Wico C magneto, Top cap where the plug wires connect, (Item #: 105663) $22.98

Magneto Cap - For Allis Chalmers tractor models B, C, CA, RC, U, UC, WC, WD, WF, Compatible with Case tractor models C, SC, VA, 200B, 300, 300B, 400B, Fits Minneapolis Moline 4 cylinder models, Fits Oliver 4 cylinder models, Wico X, XH, XV magneto, (Item #: 105668) $75.00

Magneto Cap Gasket - This Magneto Cap Gasket fits tractor models: B, IB, C, RC, WC, WD, and WF all with Wico magneto model: XH894. (Item #: 180203, Ref: XHGK) $4.70

Magneto Condensor - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH477B, XH1042, XH3001 magnetos. (Item #: 182833, Ref: FXH2024) $20.10

Magneto Gasket Set - FM Series - For Allis Chalmers tractor models B, C, RC, U, WC, WD, WD45, WF (all with 2 piece cap), Compatible with Minneapolis Moline tractor models R, Z (both with 2 piece cap), (Item #: 150647) $20.70

Magneto Mounting Gasket - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Item #: 111272, Ref: ABC556) $10.00

Magneto Point Set - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH477B, XH1042, XH3001, XH909 (Item #: 172995, Ref: FXH2100B) $20.70

Magneto Rotor - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits WICO XH894, XH3001, XB2065 and XH2659 magnetos. (Item #: 179184, Ref: FXG1008) $40.40

Magneto, Wico XH - Complete Magneto, includes mounting bracket. For tractor models B, IB, C, RC, WC, WD, WF, U, UC and others. Replaces Fairbanks Morse FM series. (Item #: 178601, Ref: XH894) $551.00

Resistor Kit - Resistor Kit. Used with Voltage Regulator number VR1813 when replacing a generator cut-out. For B, C, CA, WC, WD, WD45, WF. (Item #: 184930, Ref: VRK1815) $64.00

Rotor - Used with Delco distributors 1111411 1112607, and 1112609 with a clip held cap. For tractor models: B, IB, C, CA, G, D10, D12, D14, D15, D17, D19, H3, RC, WC, WD, WD45, I400, WF, I500, I600. Replaces 1921285, 225736, and 70225736. (Item #: 110177, Ref: 1750498M1) $3.60

Rotor - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, G, IB, WD, WD45 Replaces Allis Chalmers OEM number 70225736, 225736, , Compatible with Gleaner Combine (s) E, E3, K, Replaces Delco Remy manufacturer number 1921285, For Delco distributors with clip held cap, (Item #: 111111) $13.50

Solenoid Switch - Solenoid Switch, 6-volts For tractor models using Delco Starters 1108036, 1107466, 1107474, 1107905, 1107025, 1107977, 1107092. For B, C, 100, D10, D12, D14 and D15. Replaces 70223334, 223334. (Item #: 105670, Ref: 142364HA) $20.00

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. 14mm thread diameter, 3/8 inch reach, 13/16 inch hex. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type (Item #: 111743, Ref: AL295) $4.00

Spark Plug Wire Set, Custom - Fits: B, C, CA, D10, D12, D14, D15, D17, I40, I400, I500, I60, I600, IB, RC, WC, WD, WD45, WF, 170, 175, 510, 512, 514, 610, 612, 614 With Distributor Only. Replaces: 225084, 225613, 229867, 70225084, 70225613, 70229867 (Item #: 107890, Ref: S.65034) $20.00

Starter - Remanufactured assembly for 6 volt systems (1950-1958). Replaces Delco 1107043 Allis Chalmers 70211838 and 211838. For tractor models B, C, CA. Refundable $60.00 core charge will be added to your order. (Item #: 203423, Ref: S14035) $371.70

No
Picture
Starter - For tractor models B, C both from 1944-1956 with Delco starter. Additional $60 core charge will be added to your order. (Item #: 203423, Ref: 1107043) $371.70

No
Picture
Starter - For A, B, C, F, all Gas, LPG Combines (with G262 Engine) 1961-1970. REBUILT Starter. 12 Volt. No exchange (Item #: 211093, Ref: 1107227) $434.20

Starter Armature - Fits Delco starter numbers: 1107006, 1107017, 1107024, 1107025, 1107029, 1107030, 1107035, 1107036, 1107043, 1107044, 1107045, 1107046, 1107059, 1107064, 1107094, 1107096, 1107127, 1107162, 1107165, 1107200, 1107409, 1107423, 1107436, 1107466, 1107472, 1107474, 1107820, 1107822, 1107823, 1107824, 1107905, 1107951, 1107962, 1108036, 1108059, 1108072, 1108093, 1108099, 1108109, 1108162, 1108167, 1108176. Verify Starter number before ordering. (Item #: 178583, Ref: 1872505) $69.00

Starter Drive - Starter Drive - (This is not a complete starter, just the drive gear assembly) B, C, CA (models for 1940-1958 using starter 1107043 or 1107096 and auto-lite MAW4031) (Item #: 115369, Ref: 1880651) $69.00

Starter Drive Housing - For tractor models B, IB, C, CA, RC, WC, WD, WD45, D10, D12, D14. All with Delco starters 1107466, 1107006, 1107017, 1107024, 110743, 1107044, 1107045, 1107046, 1107096 or 1107951. (Item #: 150733, Ref: 1879156) $127.00

Starter Drive Spring - Starter drive spring For B, C, CA, D10, D12, D14, WC, WD, WD45, WF. (Item #: 111718, Ref: 1860639) $31.00

Starter - Prestolite Style (5089), Remanufactured, Prestolite, MAW4031 - For Allis Chalmers tractor models B, C, Replaces Prestolite manufacturer number MAW4031, Replaces manufacturer number 5089, 160-148, Prestolite Style, Voltage: 6, Rotation: Counter Clockwise, Teeth: 14, For Starter Drive use Item #: 115369, (Item #: 204650) $495.01

Starter, Rebuilt - Starter for B and C 1940-56. REBUILT Starter. 6 Volt, CCW, 14 teeth. Replaces OEM 1107043. There is an additional core charge for this item, which will be added to your order during processing. (Item #: 203423, Ref: TS-1000) $371.70

Starter Switch - Manual Foot Switch. For tractor models B, C, CA, G, RC, (WC serial number 74330 and up), WD, WD45, (WF serial number 1904 and up). This switch will work only on the Delco starter and will not replace the 70222880 Autolite switch. Replaces 70226128, 70217292, 70226126. (Item #: 105669, Ref: 1925781) $9.00

Tune-up Kit - for 4 Cylinder Gas Engines. Includes spark plugs (Autolite 295 or equivalent), points, condenser and rotor. For AC tractors using 14 mm, 3/8 inch reach, 13/16 inch hex spark plug. Fits CA, WD, WD45, D10, D12, D14, D15, D17 except with Delco Distributor number 112688. Verify correct spark plug size and type. (Item #: 111815, Ref: ACTK1) $27.30

Voltage Regulator, 6 Volt - Voltage Regulator, 6 volt, positive ground, saddle mount, 4 terminal. For tractor models B, C, CA, IB, WC, WD, WD45, WF. Replaces Allis Chalmers: 4514722, 74514722. Replaces Delco: 1118265, 1118305, 1118786, 1118790. (Item #: 105284, Ref: VR1813) $33.00

Wico X Series Magneto Rebuild Kit - This Magneto rebuild kit is for the Wico X Series magneto. This magneto was used on model B, C, IB, RC, WC, WD and WF. Kit contains Cover gaskets, points, condenser, felt wipers, points and condenser screws, bearing seal, rear bronze bushing, oil slinger, impulse plate gasket, mounting gasket, dust cover unit gasket, ground connecter, inspection window, inspection window gasket. Depending on the magneto number, some of these parts may not be required. (Item #: 133558, Ref: ABC3723) $61.00

Wiring Harness, Complete - Includes engine harness, light harness and instructions. For 6 volt generator systems with a cut-out relay only. Original style braiding with soldered terminals. For models B, C, CA, IB (SN: 55301 and up). Replaces: 210949, 224635, 225591, 70225591 (Item #: 132888, Ref: 600459) $225.51

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models B, C, CA. (Item #: 185755, Ref: 225591) $85.00

Engine Bearings

No
Picture
Bearing - Ball bearing, used in separator drive sheaves. For 1300, 1350, 1400, 1500, 1600, 2300, 2500, 2600, A, A2, B, C, G, L, L2, M, M2, MH, MH2 (Item #: 180776, Ref: 62092RS) $12.20

Cam Bearing, Set of 3 - Fits 125, 138, 149 CID gas engines in models: B, B15, IB, C, CA, 60H, RC all with B125 CID 4 cylinder gas engines. Also Engines 134 and 149 CID: D10 with engine serial number <3501, D12 with engine serial number 3001>, D14, D15 except Series II with engine serial number 9001>. Replaces 70230795. Note: All three cam bearings are the SAME size diameter. Please check before ordering. (Item #: 105884, Ref: 70209130) $35.80

Connecting Rod Shim Stock Kit - Contains 1 set of 16 shims that are .004 inches thick each. For 116 and 125 CID engines in models B, C, CA, D272, IB, RC, combines 60 and 66. (Item #: 183917, Ref: 70207523) $29.40

No
Picture
Main Bearing Cap Shim Kit - This Main Bearing Cap Shim Kit contains 1 set of 12 shims that are .004 inches thick each. For 116 and 125 CID engines in models B, C, CA, D272, IB, RC, combines 60 and 66. (Item #: 183895, Ref: 70206964) $41.60

No
Picture
Main Bearing Set - .010 - This Complete Main Bearing Set is .010 oversize for B, IB, C, CA, RC with gas engines. (Item #: 105876, Ref: 70209867-010) $131.00

No
Picture
Main Bearing Set - .020 - This Complete Main Bearing Set is .020 oversize for B, IB, C, CA, RC with gas engines. (Item #: 105877, Ref: 70209867-020) $144.00

Main Bearing Set .030 - Available in .030. For tractor models B, C, CA, CB, CE, IB, RC. (Item #: 105878, Ref: MS-211P-030) $130.00

Main Bearing Set -Standard - This Complete Main Bearing Set is standard size for B, IB, C, CA, RC with gas engines. (Item #: 105875, Ref: 70209867) $100.00

Rod Bearing, 201 Gas, STD - Individual Connecting Rod Bearings. Standard. For tractors: W, WC, WF, WD, WD45G, D17G, 170G, B, C, CA, RC. (Item #: 105941, Ref: 231125) $14.40

Rod Bearing Pair - Single Rod Bearing in Standard (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Standard journal measures 1.937 inches. Replaces YTO CB-179P-STD and 70207460. (Item #: 105870) $22.20

Rod Bearing Pair - Single Rod Bearing in 0.010 (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Journal measures 1.927 inches. Replaces YTO CB-179P-010 and 70223639. (Item #: 105872) $17.30

Rod Bearing Pair - Single Rod Bearing in 0.020 (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Journal measures 1.917 inches. Replaces YTO CB-179P-020 and 70223640. (Item #: 105873) $17.50

Rod Bearing Pair - Single Rod Bearing in 0.030 (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Journal measures 1.907 inches. Replaces YTO CB-179P-030 and 70223632. (Item #: 105874) $22.87

Rod Bearing Pair, STD - Individual Connecting Rod Bearings. Standard. For tractor models B, IB, C, CA, RC. For standard 1.937 inch rod journal. Replaces: 70223629, 207460, 208602. (Item #: 105870, Ref: 223629) $22.20

No
Picture
Rod Bearing Set, .010 - Engine Bearing Kit. For gasoline models. .010 under size. For tractors: B, IB, C, CA, RC. (Item #: 183875, Ref: CRK-ABC-010) $66.00

No
Picture
Rod Bearing Set, Standard - With Journals measuring 1.937 inches. Engine Bearing Kit. For gasoline models. STANDARD Connecting Rod Bearing Set. For tractors: B, IB, C, CA, RC. (Item #: 183903, Ref: CRK-ABC) $73.00

Engine Gaskets

Complete Gasket Set - Complete Overhaul Gasket Set for 125 CID 4-cyl gas engine. Does not include rear main crankshaft seal. For tractor models B, C, CA, RC - Includes all gaskets for major engine overhaul. (Item #: 105879, Ref: 70226500) $58.00

Crankshaft Seal, Front - This Front Crankshaft Seal is 2.01 inches outside diameter. If you need one that is 1.9375 inches outside diameter, you need part number 70225806. For tractor models (60H, B, B15, C, CA, IB all with engine serial number CE-177730 and up), W25, WC, WD, WF. Replaces 70226620, 70275814, 72090149. (Item #: 105882, Ref: 70224929) $9.60

Gasket Set, Upper - Upper Gasket Set for B125 4 cylinder gas engines. For tractor models B, B15, C, CA, IB. (Item #: 105880, Ref: 70224768) $43.00

Head Gasket - For tractor models IB, B, B125, B15, C, CA. Head Gasket Only. (Item #: 172776, Ref: 70206893) $24.20

Manifold Gasket Set - For Allis Chalmers tractor models B, C, CA, IB, RC, Replaces Allis Chalmers OEM number 70226096, Includes manifold and carb gasket, (Item #: 101478) $9.70

Oil Filter Gasket - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D17, IB, RC, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70204863, 70207882, 70232522, 70233228, Length: 4-13/16", Tall: 1-1/2", Center to center mounting holes: 3-1/2", Rubberized Cork, (Item #: 164309) $6.10

Oil Pan Gasket - Oil Pan Gasket. For tractors: B, IB, C, CA, RC, D10, D12, D14, D15, gas. For D10, D12, D14, D15. (Item #: 105881, Ref: 70232325) $9.50

Rear Crankshaft Seal - For tractor models B, C, CA with 125 CID gas. 3.955 inch outside diameter, 3.375 inch inside diameter, 0.270 inch thick. Original (felt) style. Replaces OEM numbers: 70206948, 70225805, 225805, 206948. (Item #: 185713, Ref: 311268) $13.40

Rear Cranshaft Seal - Cork version of part 311268. 3.955 inch outside diameter, 3.375 inch inside diameter, 0.270 inch thick. Replaces OEM numbers: 70206948, 70225805, 225805, 206948 (Item #: 160839, Ref: 70206948) $7.70

Valve Cover Gasket - Valve Cover Gasket. Rocker Cover. For tractors: B, C, CA, RC. (Item #: 128623, Ref: 70206892) $19.00

Engine Rebuild Kits

Basic Engine Kit - 4-Cylinder Gas, 125 CID. 3-3/8 inch standard bore, 3-7/16 inch overbore supplied. Basic Engine Kit, less bearings. Contains sleeves, pistons and rings, pins, overhaul gasket set. For tractor models B, IB, C, CA, B125. (Item #: 131158, Ref: BEKA1122-LCB) $480.00

Basic In-Frame Overhaul Kit - 4-Cylinder Gas, 125 CID. 3-3/8 inch standard bore, 3-7/16 inch overbore supplied. Basic In-Frame Kit. Contains sleeves, pistons and rings, pins, valve-grind gasket set, oil pan gasket. For tractor models IB, B, B125, B15, C, CA. (Item #: 189620, Ref: BIFA1122) $482.34

Cylinder Kit - For Allis Chalmers tractor models B, C, CA, IB, RC, Compatible with Allis Chalmers Combine (s) 60, Compatible with Allis Chalmers Engine (s) 125 (gas), Replaces Allis Chalmers OEM number 70283103, Bore: 3.375", 6.25:1 compression ratio, (Item #: 128667) $122.00

Cylinder Sleeve - For Allis Chalmers tractor models B, C, CA, Compatible with Allis Chalmers Engine (s) 125 (Gas), Replaces Allis Chalmers OEM number 70208743, 208743, Sealing rings included, (Item #: 128700) $96.00

Engine Rebuild Kit - Less Bearings, 125 - For Allis Chalmers tractor models B (s/n 100-later), C, CA, IB, RC, Compatible with Allis Chalmers Engine (s) 125 (gas), Bore: 3.375", Compression Ratio: 6.25:1, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For 3.437" overbore engine kit use Item #: 105878, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130496) $451.00

Valve Overhaul Kit - Contains intake and exhaust valves, springs, guides and keys. For tractor models B, C, CA (4-cylinder gas 125 CID or 160 CID engines), D10, D12, D14, D15 (4-cylinder gas 138 and 149 CID engines) and D15 Series II (4-cylinder gas 160 CID engine). (Item #: 120228, Ref: VOKA125) $136.00

Engine Parts

Crankshaft Pulley - Fits (B, C, IB serviceable but does not have provisions for hand crank), CA, D10 (up to serial number 3500), D12 (up to serial number 3000), D14; Replaces: 236741, 70236741, AM4529. (Item #: 108008, Ref: 70236741) $67.00

Crankshaft, Remanufactured, 213352 - For Allis Chalmers tractor models B, C, CA, Replaces Casting number 213352, 206638, 207145, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200002) $550.01

No
Picture
Cylinder Head, Remanufactured, AM2917 - For Allis Chalmers tractor models B, C, CA, RC, Replaces Allis Chalmers Casting number AM2917, 4 Cylinder, Casting No. AM2917, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200025) $750.01

Cylinder Head, Used - For Allis Chalmers tractor models B, C, CA, RC, Replaces Allis Chalmers Casting number AM2917, Engine(s): 125, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200025, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400025) $321.01

No
Picture
Cylinder Liner - For Allis Chalmers tractor models B, C, CA, Replaces Allis Chalmers OEM number SW122, Overbore: 3-3/8" to 3-7/16", (Item #: 176712) $63.00

No
Picture
Flywheel Ring Gear, Used - For Allis Chalmers tractor models B, C, CA, Replaces Allis Chalmers OEM number 70209292, 209292, Teeth: 90, Outside Diameter: 11.43", Inside Diameter: 10.645", For a new version of this item use Item #: 100080, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 455260) $19.01

No
Picture
Front Crankshaft Seal - For Allis Chalmers tractor models B (s/n 177730 and later), C (s/n 177730 and later), CA (s/n 177730 and later), WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 240319-P, 70224929, Outside Diameter: 2.010", (Item #: 173659) $11.72

Governor - For tractor models B to serial number 123994, IB to serial number 2835, C, CA. Governor Assembly does NOT include housing, for tractors with magneto ignition. (Item #: 105368, Ref: 70207583) $215.00

Governor Gear Bushing - Mounted in front of the engine block, this Governor Gear Bushing measures: 1.881 inches outside diameter, 0.564 inches wide, and 1.752 inches inside diameter. It is used on Allis Chalmers B, C, CA, D10, D12, D14, D15, IB, RC, D272. Replaces 207466, 210689, 70210689 (Item #: 165362, Ref: 70210689) $25.50

Governor Rod Linkage Spring - Distributor or Magento Ignition, overall length 3-5/8 inch. For tractor models B, IB, C, CA, D10, D12, D14, D15, I40, I60, I600, RC. (Item #: 164570, Ref: 70212321) $25.00

Governor Shaft Bushing, Front - Measuring 0.437 inches inside diameter, 0.625 inches outside diameter, and 0.496 inches overall length, this bushing is used on Allis Chalmers: B, C, CA, D10, D12, D14, D15, IB, RC, D272. This part replaces Allis Chalmers part numbers 70207714, 207714 (Item #: 183461, Ref: 70207714) $16.80

Hand Crank with Spinner - For tractor models B, C, CA. Replaces: 207893, 70207893. (Item #: 126701, Ref: 207893) $71.00

Pushrod - Used in Allis Chalmers B, C, CA, IB and RC tractors as well as (60 and 66 combines) and (60H, B125 power units). It is 9.828 inch length, 0.280 inch diameter. Replaces original part numbers 207426, 70207426. (Item #: 184064, Ref: 70207426) $28.00

Ring Gear, Flywheel - This ring gear has 90 teeth. For B, C, CA. Inside diameter 10.645 inch, outside diameter 11.43 inch, .50 inch thick. (Item #: 100080, Ref: 70209292) $32.30

Valve, Exhaust - For tractor models AC B, IB, C, CA, B15, B125, D10, D12, D14, D15 (4-Cylinder Gas). To order Valve Locks use part number 70206880. (Item #: 128610, Ref: 70228589) $13.80

No
Picture
Valve Guide - These intake and exhaust valve guides. Replaces 234824 and AV100974. For Models with the B125 gas engine: B15 power unit, IB power unit, B, C, CA, 60H combine. Replaces 70206875, 206875, 70234824, 234824 (Item #: 128619, Ref: 70234824) $3.30

Valve, Intake - Intake valve for AC B, IB, C, CA, B15, B125, D10, D12, D14, D15, (4-Cylinder Gas). To order Valve Locks use part number 70206880. (Item #: 128616, Ref: 70234829) $7.50

$Allis Chalmers C Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. These Valve Keys are used in 125, 138 and 149 CID Gas Engines. Replaces 70206880. This is a package of 8. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60

Valve Rotator, Exhaust - Used on the following engines when equipped with Exhaust Valve Rotators: B116, B125, G138, G149, G160, W201, G201, G226, W226. Replaces OEM numbers 70224926V, 70224926, 224926. (Item #: 184379, Ref: 70224926) $32.00

Valve Spring - This valve spring is used on 125, 149, 201, 226 engines, on Allis Chalmers B, C, CA, D10 (series II), D12 (series II), D14, D15 (series II), D17, WC, WD, 170. Replaces 70206879, 206879 (Item #: 128606) $3.60

Engine Pistons and Sleeves

Liner Sealing Rings - Used on Allis Chalmers 125 CID engines. This part replaces 70227501, 70206666 (Item #: 128599, Ref: 70227501) $15.30

Sleeve and Piston Kit - Flat Head Sleeve and Piston Kit, 3-7/16 inch overbore. For 4 cylinder gas engines. Contains sleeves, pistons, pins, retainers, top chrome and oil control ring set. For tractor models B, IB, C, CA, B15, B125. (Item #: 186315, Ref: PK122) $557.00

Engine Rings

Piston Ring Set, For a Single Piston - For tractor models B, IB, C, CA, B125 with 125 CID gas engines, D10 (all), D12 (to serial number 3501 with G138 engine only). Four-ring 3-3/8 inch bore pistons. Contains 3 compression rings 1/8 inches, and 1 oil ring 3/16 inches per cylinder. (Item #: 121000, Ref: 70230093) $30.70

Piston Ring Set, Overbore - Ring Set for 4 pistons. Overbore to 3-7/16 inches, 3 compression rings at 3/32 and 1 oil ring at 3/16. 4 cylinder gas engine. For tractors: B, IB, C, CA, B15, B125. (Item #: 179753, Ref: PRS122) $106.00

Piston Ring Set - Standard - 4 Cylinder - For Allis Chalmers tractor models B, C, CA, IB, RC, Compatible with Allis Chalmers Engine (s) 125, Bore: 3.375", Ring Size: Standard, Compression Rings per Piston: (2) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Barrel Face, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 128868) $87.00

Piston Ring Set - Standard - 4 Cylinder - For Allis Chalmers tractor models B, C, CA, RC, Compatible with Allis Chalmers Engine (s) 125 (gas), Bore: 3.250", Compression Rings per Piston: (3) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Barrel Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 128941) $170.00

Exhaust System

No
Picture
Exhaust Stack - 1-1/2 - For Allis Chalmers tractor models B, C, CA, Inlet O.D.: 1-1/2", Length: 29", 3" Chrome Body, Chrome Stack With Double Liner, Inlet Notched For Manifold Bolt, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114701) $86.00

$Allis Chalmers C Exhaust Stack - 1-1\2$
Exhaust Stack - 1-1/2 - For Allis Chalmers tractor models B, C, CA, Inlet O.D.: 1-1/2", Length: 29", 3" Chrome Body, Chrome Stack With Double Liner, Inlet Notched For Manifold Bolt, (Item #: 114702) $137.05

Exhaust Stack, Chrome, Curved - Deluxe Double-Walled Curved Stack, Chrome. For tractor models B, C, CA, RC, D10, D12, D14, (D15 up to serial number 9001). 3 inch outside diameter, 5 inch BASE, 24 inch BODY, 29 inch OVERALL, 1 1/2 inch inlet outside diameter. For B thru CA with 2 1/2 inch hood exhaust hole, customer must enlarge the hood hole. (Item #: 178563, Ref: R4936) $214.30

Exhaust Stack, Chrome, Straight - Deluxe Double-Walled Straight Chrome Pipe measures 29 inches overall, a 5 inch base and a 24 inch body. Inlet outside diameter is 1 1/2 inches. Body is 3 inches diameter. For models with a 2 1/2 inch hood hole, the hole must be enlarged. For tractor models B, C, CA, RC, D10, D12, D14, (D15 serial number up to 9001). (Item #: 178565, Ref: R4935) $210.01

Manifold - Intake and Exhaust Manifold. For Model B, C, CA, RC. Gasket is available separately as part number 70226096. Replaces 225323, 70225323, AM2919. (Item #: 101477, Ref: 70225323) $108.00

Manifold Gasket - Manifold Gasket Set. Intake and exhaust. For tractors: B, C, CA, RC. Replaces 70226096, 226096 (Item #: 173662, Ref: 70226096) $10.10

No
Picture
Manifold - Intake and Exhaust, Used - For Allis Chalmers tractor models B, C, CA, Replaces Allis Chalmers OEM number 70225323, For a new version of this item use Item #: 101477, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436477) $61.01

Muffler - Combine muffler, horizontal, with Buda diesel. For A, C, CH, CR (Item #: 115303, Ref: 71136466) $93.38

No
Picture
Muffler, Above Hood, Silver - Intended for tractors with a 2-1/2 inch exhaust hole in the hood, this muffler measures: Inlet length - 7 inches, Inlet O.D. - 1-1/2 inches, Shell length - 12-3/4 inches, Outlet length - 9-1/4 inches, Outlet O.D. - 1-1/2 inches, Overall length - 29 inches, Shell diameter - 3-1/4 inches. Replaces 70227240, 227240. Used on B, C, CA, IB, RC (Item #: 100041, Ref: 70227240AH) $40.00

Muffler, Through Hood - Just like the original, this as a heat resistant painted through hood muffler. The dimensions of are: 1-1/4 inch inlet length, 1-1/2 inch inlet O.D., 20-1/2 inch shell length, 3-1/4 inch shell diameter O.D., 12-3/8 inch outlet length, 1-1/2 inch outlet O.D., 32-3/4 inch overall length. This muffler is designed for tractors with a 4 inch exhaust hole in the hood. If using All-Fuel manifold with instruction plate you will have to trim the tab to fit. Replaces 225341, 227240, 233450, 70227240, 70233450. (Item #: 189610, Ref: 70227240OE) $83.00

Muffler, Through Hood - Polished Stainless Steel will make your tractor shine! This as a through hood muffler. The dimensions of are: 1-1/4 inch inlet length, 1-1/2 inch inlet O.D., 20-1/2 inch shell length, 3-1/4 inch shell diameter O.D., 12-3/8 inch outlet length, 1-1/2 inch outlet O.D., 32-3/4 inch overall length. This muffler is designed for tractors with a 4 inch exhaust hole in the hood. If using All-Fuel manifold with instruction plate you will have to trim the tab to fit. Replaces 225341, 227240, 233450, 70227240, 70233450. (Item #: 182873, Ref: 70227240SS) $142.85

Muffler, Thru Hood - 2 1/2 inch INLET LENGTH, 1 3/8 inch INLET inside diameter, 16 1/2 inch SHELL LENGTH, 10 inch OUTLET LENGTH, 1 1/2 inch OUTLET outside diameter, 29 inch OVERALL LENGTH. REPLACES: 70233450 NOTE: Vertical/Round Body 3 1/4 inch Shell Diameter (INCLUDES BRACKETS - (1) TO HEAD BOLT and (1) TO MANIFOLD) Fits Models: B THRU HOOD - 1938 to 1957, C THRU HOOD - 1938 to 1957, CA THRU HOOD - 1938 to 1957, D10 with GAS ENGINE serial number <9001, D12 with GAS ENGINE serial number <9001, D14 with GAS ENGINE serial number <9001, D15 with GAS ENGINE serial number <9001. Replaces 225341, 227240, 233450, 70227240, 70233450. (Item #: 100043, Ref: 70227240) $60.00

Muffler, Under Hood - Used on tractors with a 2-1/2 inch exhaust hole in the hood, this under the hood Allis Chalmers flattened pipe style muffler is restoration quality. It was reverse engineered from an original and features; correct welds, correct baffles, correct sound, high temperature aluminum paint, correct angle on inlet pipe reducing heat transfer to the hood to help protect your paint. The measurements are: shell diameter 4 inches x 9 inches, Inlet OD: 1-1/2 inches, Inlet length: 1 inch, Shell length: 4-1/4 inches, Outlet length: 3-1/2 inches, Overall length: 9 inches. Replaces 0210081, 210081, 70210081. Used on B, C, CA, IB (Item #: 100063, Ref: 210081) $59.00

Muffler, Underhood, Vertical - A= 1 inch inlet length, B= 1-3/8 inch inlet inside diameter, C= 4-1/4 inch shell length, D= 3-3/4 inch outlet length, E= outlet bent pipe, F= 9 inch overall length. For tractor models B, C, CA all 1938 to 1957. (Item #: 100063, Ref: 70210082) $59.00

Muffler, Underhood, Vertical, Long Type - A= 7 inch inlet length, B= 1-3/8 inch inlet inside diameter, C= 12-3/4 inch shell length, D= 9-1/4 inch outlet length, E= 1-1/2 inch outlet outside diameter, F= 29 inch overall length. For tractor models B, C, CA all with long type underhood. (Item #: 100041, Ref: 70210081) $40.00

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl, for air intake on gas model. (A) bowl outside diameter at top: 7-1/4 inch. (B) cone inside diameter at top: 3-1/2 inch. (C) bowl side height: 3 inches. (D) overall height: 4-1/8 inches. Small bowl 7-1/4 inch diameter, for 2 inch to 3 inch inlet. For A, C, CH, CR, D17, F, F2, G, K, K2, L, M. (Item #: 157279, Ref: 71125804) $7.80

Air Cleaner Cap - Inlet diameter 1-5/8 inch, outside diameter of cap 4 inches, overall height 1-3/8 inches. For tractor models B, C, (CA Used on Eng. No. CE-13732 and up), D10, D12. Replaces 225860, 242072. (Item #: 179254, Ref: 70242072) $22.80

Air Cleaner Cap - Inlet diameter 1-1/4 inch, outside diameter of cap 3-1/4 inches, overall height 1-1/4 inches. Fits: B, C, (CA Used prior to Eng. No. CE13732), G (thru hood), IB, RC Replaces: 208299, 70208299 (Item #: 110912, Ref: 70208299) $20.60

Air Cleaner Clamp - Air cleaners with spring clip cup retainer require this clamp. For tractor models B, C, CA. (Item #: 121751, Ref: 70225817) $11.00

Air Cleaner Cup - This Air Cleaner Cup has a 4 inch inside diameter and a 4-7/16 inch outside diameter at the lip. For tractor models B, C, CA. Replaces 207811, 225818, 70225818. (Item #: 111341, Ref: 70225818) $17.30

Air Cleaner Hose - For Allis Chalmers tractor models B, C, CA, D10, D12, IB, Replaces Allis Chalmers OEM number 70206996, I.D: 1-1/2", Length: 2-7/16", (Item #: 162436) $6.00

Air Cleaner Hose Clamp - This clamp is used on B, C, CA, D10, D12, D14, RC, WC, WD as an air cleaner hose clamp. Works for hose outside diameter from 1 3/4 inches to 2 inches. It Replaces: 921913, 910144. (Item #: 178164, Ref: 608287) $3.80

No
Picture
Basic Carbiuretor Kit - For Allis Chalmers tractor models B, C, RC, Replaces Zenith manufacturer number S906, 8651, 8691, 9492, 9507, 9635, 9636, 10669, Includes Gaskets, Needle, Seat, and Throttle Shaft, (Item #: 183998) $35.60

Carburetor - Aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, 9706. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. (Item #: 185128, Ref: 12522B) $286.00

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: B, B-15, C, D10, D12, CA 1952-56, IB, R, W, WC, WD Crawler. Replaces TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, 9706. This carburetor comes with studs that attach to carburetor. THIS WILL NOT WORK IN THOSE APPLICATIONS THAT STUDS MUST BE USED IN THE MANIFOLD. 2 5/16 InchES CENTER TO CENTER ON MOUNTING BOLTS. Made in USA, 1 year warranty. (Item #: 100747, Ref: 12522) $480.00

Carburetor Float - This carburetor float is 2.25 inches wide and is used for the following Zenith carburetor models: 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981 and for tractor models: B, C, CA, D10, D12, WC, and WD. (Item #: 108454, Ref: CTP28) $16.20

Carburetor Float - For tractor models B, C, CA, RC, WC, WF, D14, D15. Carburetor Float for Marvel Schebler with small bowl. Carbs: TSX138, TSX422, TSX154, TSX159, TSX186, TSX264, TSX305, TSX363, TSX380, TSX422, TSX470, TSX486, TSX670, TSX701, TSX815, TSX844. (Item #: 108449, Ref: 9N9550A) $9.60

Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4-5/16 inch. B, C, CA, D14, D15, IB, RC, WC, WD, WF, H3 with the following carburetors: TSX114, TSX138, TSX154, TSX155, TSX159, TSX186, TSX253, TSX264, TSX305, TSX363, TSX380, TSX42, TSX422, TSX43, TSX470, TSX474, TSX486, TSX653, TSX668, TSX670, TSX701, TSX74, TSX815, TSX844, TSX94, TSXU828, TSXU829, TSXU831, TSXU832 Replaces part numbers 70219976, 70219995, 70219998, 70222048, 70222053, 70222053V, 70233209 (Item #: 182465, Ref: 9N9502) $4.20

Carburetor Kit, Basic - FOR ZENITH Carburetor 10697, 10698, 10697, 10697A, 10698A, 10902A, 10903A, 211954, 212844, 212845, 224640, 224641, 9705, 9706, 9804. For B, C, RC. (Item #: 112436, Ref: BK21AV) $37.30

Carburetor Kit, Basic - FOR ZENITH CARBS 9705, 9706 OR ALLIS CHALMERS CARBS 212845-2, 212844-2 For B, C, RC. (Item #: 112436, Ref: BK22V) $37.30

Carburetor Kit, Basic - Kit for Zenith 8561, 8691, 9636, 9635, 9804, 9805, 106977, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 11142, 12401, 12749, 8781, 8979, 9707, S1203, 10981 carbs used on B, C, CA, D10, D12, WC, WD. (Item #: 100738, Ref: Z101) $27.40

Carburetor Kit, Basic - Kit for Marvel TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX670, TSX701, TSX815, TSX844 carbs used on B, C, CA, D14, D15, WC, WD. (Item #: 100733, Ref: MS101) $15.60

Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models B, B15, C, D10, D12, CA, IB, R, W, WC, WD. (Item #: 186565, Ref: K2119) $47.80

Carburetor Kit, Basic - For Marvel-Schebler numbers: TSX154, TSX305, TSX470, TSX486. Includes: gaskets, needle, seat, and throttle shaft. For tractor models B, C, CA and RC. (Item #: 183912, Ref: R7816) $28.00

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 13876, 12522, 12522B. (Item #: 183586, Ref: BK44V) $27.60

Carburetor Kit, Complete - For Marvel-Schebler numbers: TSX154, TSX305. Includes Basic Kit, plus fuel and air adjusting screws and jets. For tractor models B, C and RC. (Item #: 184707, Ref: R7817) $47.70

Carburetor Kit, Comprehensive - Zenith Numbers; 10698A, 10902A, 10903A, 10902, 10903, 9804, 10697. Allis Chalmers Carburetor numbers 211954, 224640, 224641, 70211954, 70224640, 70224641. (Item #: 119694, Ref: C521AV) $36.35

Carburetor Kit, Comprehensive - For model C with Carburetor 216937, 70216937. Zenith Number S-864 (Item #: 119694, Ref: C521V) $36.35

Carburetor Kit, Comprehensive - Comprehensive Carburetor Kit For Marvel-Schebler #s: TSX154, TSX305. Contains all parts shown. For tractor models B, C and RC. (Item #: 184695, Ref: R7818) $63.00

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 9705, 9706, 9804, 11544B, 211954. Also replaces Zenith S906. Add $50.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Item #: 203362, Ref: 1102-CARB) $235.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 11544B, 9706, 10697, 10699. For the following tractor models: B, C. Add $50.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Item #: 203362, Ref: 1104-CARB) $235.01

No
Picture
Carburetor, Rebuilt - This rebuilt Zenith carburetor is a replacement for 12522. Replaces Marvel numbers TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. A $50.00 core charge will be added to the price and is refundable when you send your core to us and it is verified to be a rebuildable core. You will receive instructions for returning your core for a refund if you have one available. (Item #: 203219, Ref: 12522R) $225.01

Fuel Line - This steel fuel line fits the following tractor models: B, C, CA, D10, and D12. It also fits the D14 auxiliary engine only, not the tractor. It replaces the OEM part numbers 70215478 and 70207278. You may need to trim to fit your tractor. (Item #: 179393, Ref: 70243108) $33.10

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor.Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces 70237945 and 237945. Will fit the following models: B, IB, C, CA, G, D10, D12, D14, D15 (Gas To Sn#9001), D17 (Gas to Sn#42000), D19 (Gas To Sn#12000), RC, WC, WD, WD45, I400, WF, I600 (Gas), 170 (Gas), 175 (Gas), 180 (Gas). (Item #: 105382, Ref: 9N9162) $3.20

Fuel Tank Cap - For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Item #: 185782, Ref: D5NN9030A) $9.10

Idler Block - Wooden idler block. For A, AH, B, C, CH, E, R. Price is for EACH. Minimum Order is 4. (Item #: 71116256) $24.48

Sediment Bowl Assembly - Sediment bowl. Fits Model B, C, CA, R, D14, D17, D19. Replaces 70237944. Might look slightly different than picture. (Item #: 105362, Ref: 910513) $21.00

Sediment Bowl Gasket - 2" - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15 (gas, s/n 9001-earlier), D17 (gas, s/n 42000-earlier), D19 (gas, s/n 12000-earlier), G, IB, RC, WC, WD, WD45, WF, 170 (gas), 175 (gas), 180 (gas) Replaces Allis Chalmers OEM number 70208362, 208362, , (Item #: 105372) $1.40

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Item #: 105364, Ref: 49923D) $3.30

Throttle Lever - The new Throttle Lever fits Allis Chalmers B (Serial Number 101 and up), C, CA, IB (Serial Number 1001 and up. It is 6-7/8 inches Long, 3/4 inch wide and 0.104 inch thick. It replaces original part numbers 207542, 211268, 70207542 and 70211268. The primer color may vary from the photo. (Item #: 114936, Ref: 70211268) $22.70

Gauges

Ammeter - For tractor models B, C, CA, RC, WC, WD, WD45, WF. (Item #: 111040, Ref: 70275840) $16.30

Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. Replaces 70254407, 254407 (Item #: 187035, Ref: ACS1833) $30.00

Amp Meter - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, RC, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70254407, (Item #: 162433) $10.00

Oil Gauge - Oil pressure gauge. For IB, B, C, CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF (Item #: 102135, Ref: 70207834) $17.90

Oil Pressure Gauge - White Face. 30 psi, engine mounted. For tractor models B, IB, C, CA, G, RC, WC, WF, WD, WD45. Replaces 70207834. (Item #: 100075, Ref: 207834) $19.50

Oil Pressure Gauge - For tractor models B, C, CA, WC, WD, WD45. This oil pressure gauge reads up to 50 psi and has a 2" body. Replaces 70226967, 70228719, 9A550. (Item #: 150623, Ref: 9N9273A) $15.60

Oil Pressure Gauge 1940-49 - Black Bezel, White Face. No studs. For tractor models B, IB, C, CA, WD, WF, WC, WD45. Replaces: OEM numbers 70207834H, 70207834V and 70207834. (Item #: 100076, Ref: 2348803-B) $14.98

Oil Pressure Gauge 1949-57 - Orange Bezel, White Face. Replaces OEM number 70207834H. No studs. For tractor models B, IB, C, CA, WD, WF, WC, WD45. (Item #: 121599, Ref: 2348803-O) $18.90

Temperature Gauge - For tractor models B, C, CA, RC, WC, WD, and WD45. Stem is 3 3/8 inch overall length. This gauge screws into top radiator hose inlet. (Item #: 100077, Ref: 70213675) $29.50

Hitch / Drawbar

Lift Arm Latch Coupler Spring - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XT, Replaces Allis Chalmers OEM number 70235881, 70327360, 235881, 327360, Overall Length 3-1/4", (Item #: 126680) $6.30

Three Point Hitch Conversion KIt - Used on Allis Chalmers B and C tractors with existing hydraulics, this kit Category I hitch bolts onto drawbar. It features 2 inch x 8 inch hydraulic cylinder, shortened adjustable top link and bracket. (Item #: 178968, Ref: ACS015) $1199.01

Lights

Bullet Tail Light - This Bullet style Tail Light is for models B, C, CA, G, WD, WD45, D10, D12, D14, D15. Bullet Tail Light. 6 Volt with Glass Lense. Also available in 12 Volt, order PART R4383 Instead. (Item #: 105309, Ref: R4384) $48.80

Bullet Tail Light - 12 Volt - For B, C, CA, G, WD, WD45, D10, D12, D15. Bullet Tail Light. 12 volt with glass lens. Also available in 6 volt, order part number R4384 instead. (Item #: 105310, Ref: R4383) $49.80

Headlight, 6 Volt - This 6 Volt headlight measures 4 3/4 inch diameter and has a 1/2 inch diameter stud for mounting. Single wire light. May come black or gray. For B, C, CA, G, D10, D12, D14. Headlight. This is a radiator mount for the D10, D12 and D14. For 12 Volt, order R4003 bulb. Replaces OEM numbers 210921, 210922, 70210921, 70210922. (Item #: 105306, Ref: R3997) $56.00

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: B, C, CA, RC, WC, WD, WD45, WF, (D10, D12, D14 early, with bulb style light), D15 up to serial number 9001. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Used on Allis Chalmers Combines: A, C, E, EIII, F, K, L, L2, M, M2. Tractors : D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 5040, 5050, 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $37.00

Light Switch - 3 Position - Fits B, C, CA, G, IB, RC, WC, WD, WD45, WF. Can be used to replace OEM number 70227233. (Item #: 105312, Ref: 70208197) $23.00

Oil System

Oil Fill Breather Cap, NO Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Fits over 1-1/2 inch pipe. Replaces OEM numbers 203196, 205298, 200267. (Item #: 110064, Ref: R4459) $21.30

Oil Fill Breather Cap, With Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Replaces OEM numbers 203196, 205298, 200267. (Item #: 107000, Ref: R4458) $42.00

Oil Filter - Oil Filter Cartridge, threaded neck type can. For GAS engines on: B, C, CA, G, IB, RC, WC, WD, WF, WD45, D10, D12, D14, D15, (D17 prior to series IV serial number less than 24000) and others - verify part number. (Item #: 110866, Ref: 70240912) $22.30

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

Oil Pump Repair Kit - This Oil Pump Repair Kit includes: (2) 70207842 rotor blades, (4) 70207838 rotor blade springs, (1) 70223531 rotor blade shaft, (1) 70277273 body to block gasket, (2) 70207840 pump cover gaskets, fits B, C, CA, IB, RC, (2) 70228393 pump cover gaskets, fits D10, D12, D14, D15. Also contains (1) 70233390 oil pump spring retaining pin and (1) 70207839 pressure regulating Spring both used on B, C, CA, (D15 serial number 9001 and up), (H3 serial number 6001 and up), IB, RC all gas/LP. These two parts are NOT used on D10, D12, D14, (D15 prior to serial number 9000) or H3. Parts in this kit are items # 3, 4, 5, 6, 8, 11 and 12 in the image. Replaces: 207838, 207839, 207840, 207841, 207842, 207843, 223531, 228393, 233210, 233390, 277273, 70207838, 70207839, 70207840, 70207841, 70207842, 70207843, 70223531, 70228393, 70233210, 70233390, 70277273. (Item #: 167035, Ref: ACS3420) $166.00

Paint

No
Picture
Paint, Persian Orange #1, 1 Quart - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108313, Ref: TP282QT) $23.40

No
Picture
Paint, Persian Orange, 1 Gallon - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108314, Ref: TP282GAL) $63.00

No
Picture
Paint, Persian Orange #1, Spray Can - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108312, Ref: TP282SP) $9.00

PTO / Driveline

PTO and Lift Shaft Housing Seal - PTO Outer Seal for 1 speed, 1 3/8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779 (Item #: 128541, Ref: 70241779) $7.70

PTO Shaft Seal - This PTO shaft Seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: B, C, IB. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351 (Item #: 169955, Ref: 471765) $9.10

Seats

Pan Seat - This tractor seat is 19 inches wide. Fixed Pan Seat. C, CA, RC, WC, [ WD, WD45 (using 1 bolt Seat Pan) ], WF. Replaces: 200145, 218102, 225050, 70225050. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Item #: 101352, Ref: 8N400) $50.00

Seat Cushion - Durable weather-proof black leatherette covers. One piece solid foam filler. Tractors: A, B, C, (28 inch X 15 inch). (Item #: 101193, Ref: 70205693) $113.00

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Sheet Metal / Body Parts

Battery Box - For B, C, CA Gas Models. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103869, Ref: 70226026) $91.00

Battery Box - OEM Quality - This battery box is complete and comes with a Persian Orange powder coated finish. It fits the following tractor models: B, C, and CA. The box measures 7 3/16 inches wide, 8 3/4 inches tall, and 9 3/4 inches long. It also replaces part number: 226026. This part does come with a "Finish Quality" paint finish. (Item #: 133699, Ref: 70226026-OEM) $136.44

Fender, LH - For tractor models B, C, CA. Mounting bracket NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. This fender is accurate for an early B. It will work for late B, C and CA, but is not like original. Replaces: 225234, 70225234 (Item #: 105551, Ref: 720190) $175.01

Fender, RH - For tractor models B, C, CA. Mounting bracket NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. This fender is accurate for an early B. It will work but is not original for late B, C and CA. Replaces: 225236, 70225236 (Item #: 105550, Ref: 720191) $175.01

Grille Screen - For Allis Chalmers tractor models B, C, CA, IB, Length: 17", Width: 16", Comes primered (color may vary). Prior to painting check fitment, (Item #: 122079) $29.20

No
Picture
Guard - Two prong guard, reference BC225. For A, C, E, F, G, K, L, M, T. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 162246, Ref: 71116504) $187.00

Hood, with Large Exhaust Hole - 18 gauge (thicker than original), primer color may vary, for through hood muffler. Fit To Tractor Before Painting. For tractor models B, C, CA. Replaces 225260. (Item #: 182673, Ref: 70225260) $571.37

Hood, with Small Hole - 18 gauge, (thicker than original) Small exhaust hole, so the muffler sits on top of the hood, or underhood muffler is used. Primer color may vary, fit To Tractor Before Painting. For tractor models B, C, CA. (Item #: 182675, Ref: 225260) $571.37

$Allis Chalmers C Tool Box \ Shroud$
Tool Box / Shroud - For Allis Chalmers tractor models B, C, CA, Replaces Allis Chalmers OEM number 70225244, 225244, Using electric start and Gemmer steering gear, Restoration quality, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 104053) $228.57

$Allis Chalmers C Tool Box \ Shroud$
Tool Box / Shroud - For Allis Chalmers tractor models B, C, Replaces Allis Chalmers OEM number 70219919, Restoration quality, Using hand start only and Ross steering gear, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 104054) $228.57

Steering

Steering Tube Mounting Brackets - Pair - For Allis Chalmers tractor models B, C, CA, G, IB, Replaces Allis Chalmers OEM number 207218, 70207218, (Item #: 126716) $35.60

Steering Wheel - For B, C. Steering wheel, metal spokes, 15 inch diameter, 11/16 inch Keyed Hub. (Item #: 101402, Ref: 70261861) $45.90

Steering Wheel - 16 inch diameter, 11/16 inch-3/4 inch tapered keyed hub, 3 steel spokes. For tractor models B, C, CA, RC. Replaces 70207370, 261861. (Item #: 101402, Ref: 70225330) $45.90

Steering Wheel - For Allis Chalmers tractor models B, C, CA, IB Replaces Allis Chalmers OEM number 70261861, 207370, 261861, 225330, 70207370, 70225330, , Compatible with Avery tractor models BF, BG, R, V, 16" diameter, 11/16"-3/4" tapered, keyed and stepped hub, 3 bare metal spokes, Just Like Original, (Item #: 101403) $43.60

Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $9.30

Tie Rod End, LH - A=3.500 inch, B=13/16 inch diameter. 18 right hand thread. For tractor models B, C. (Item #: 104280, Ref: 70207726) $53.00

Tie Rod End, RH - A=3.500 inch, B=13/16 inch 14 right hand thread. For tractor models B, C. (Item #: 104279, Ref: 70207725) $31.10

Upper Steering Shaft Tube Bushing - For Allis Chalmers tractor models B, C, CA, G, IB, Replaces Allis Chalmers OEM number 70210475, (Item #: 126765) $30.00

Wheels

9" x 24" 4 Bump Rear Rim, Off-White - For Allis Chalmers tractor models B, C, Replaces Allis Chalmers OEM number 70211201, Width: 9", Diameter: 24", Type: Bump, Bumps: 4, Rim Color: Off-White, (Item #: 103774) $261.00

Bearing Cone - Outer Cone for front wheel bearings. Prior to 3000 and 9001 up. For tractor models B, C, CA, D10, D12. (Item #: 182875, Ref: 70209925) $9.70

Bearing Cone - Inner Cone for front wheel bearings. For B, C, CA, D10 (to 3500 and 9001 up), D12 (to 3000 and 9001 up). (Item #: 172510, Ref: 70209926) $8.30

Front Rim - 15 inch x 3 inch. 5-Lug, For model B, C and CA. 2-3/4 Inch Pilot, 2 5/8 Inch Bolt center to center and 3 1/2 Inch Backspacing Replaces: 231520, 70231520 (Item #: 103753, Ref: R0089) $166.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $118.00

No
Picture
Front Wheel Bearing Kit - Kit containes one each: 70209925 (Cone), 70209984 (Cup), 70209926 (Cone), 70209983 (Cup). Kit repairs one wheel. For tractor models B, C, CA, D10 (to 3500 and 9001 up), D12 (to 3000 and 9001 up). (Item #: 121765, Ref: 70228459) $46.10

Front Wheel Lug Bolt - Used in many applications, this wheel stud has 1/2 inch - 20 NF thread, 1 inch thread length and 13/16 inch hex head. Used on Allis Chalmers 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, B, C, CA, D10, D12, D14, D15, D17, D19, G as rear rim lug bolt, WC, WD, WD45, WF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863. (Item #: 111560, Ref: 512581M1) $1.70

Front Wheel Weight - For tractor models B, C and CA all with 3 inch x 15 inch 5 hole rims. J-Hooks are ordered separately as part number MHS038. (Item #: 182850, Ref: 850368M1) $159.00

Front Wheel Weight J-Hook - Used with Part number 850368M1. Includes hook, bolt and washer. Priced individually. 4 required per weight. (Item #: 179355, Ref: MHS038) $6.40

Rear Wheel Clamp - For Allis Chalmers tractor models B (s/n 58401-later), C, IB, Replaces Allis Chalmers OEM number 70210215, 210215, (Item #: 126623) $25.50

Rear Wheel Rim Clamp - Eccentric Style - For Allis Chalmers tractor models B (s/n 58401-later), C, IB, Replaces Allis Chalmers OEM number 70210216, (Item #: 126622) $30.10

Seal Felt - Front wheel oil seal assembly. This front wheel seal is made of steel and felt. This Allis Chalmers front wheel seal measures : 1.437 inches inside diameter, 2.563 inches outside diameter. and 0.586 inches wide. For tractor models B, C, CA, D10, D12. Replaces 207362, 207363, 207364, 207365, 70207362, 70207363, 70207364, 70207365 (Item #: 121766, Ref: 70207365) $26.80

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Item #: 183055, Ref: R4634) $14.00

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Item #: 183122, Ref: R4633) $11.80

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Item #: 183053, Ref: R4632) $9.80

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Item #: 183049, Ref: R5234) $2.60

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Item #: 100153, Ref: R0675) $3.80

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Item #: 100154, Ref: R0676) $9.30

AC Logo Decal - 24 inches long, Black and Orange. (Item #: 183479, Ref: R0677) $27.20

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Item #: 100163, Ref: R5168) $3.80

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Item #: 100152, Ref: R5169) $10.20

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Item #: 183047, Ref: R5233) $23.20

No
Picture
Power Shift Decals - One pair, white. For the cab on some Allis models. (Item #: 183474, Ref: R0674) $27.20

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Item #: 105281, Ref: D4PE12029AA) $14.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

Spark Plug - Fits all models 1953 thru 1975 using 1/2" reach, 7/8" heck size. (Item #: 113918, Ref: AL3116) $4.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

NOTE

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$Allis Chalmers C Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Allis Chalmers C Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Allis Chalmers C Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Allis Chalmers C Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Allis Chalmers C Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Allis Chalmers C Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Allis Chalmers C Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.75 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.10

$Allis Chalmers C Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H. Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Orange - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161192) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100109, Ref: TP280QT) $23.30

No
Picture
Paint, Allis Orange, Spray Can - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100108, Ref: TP280SP) $7.90

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Universal - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012) $59.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.20

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00