FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers WD Tractor Parts

[Categories] [All Allis Chalmers Models] [Print]

Brakes

Brake and Clutch Pedal Shaft - This new Brake and Clutch Pedal Shaft has an 0.996 inch outside diameter and is 17 1/4 inches in Length. It fits Allis Chalmers WD, WD45, gas and diesel. It replaces original part number 70222650. (Item #: 180236, Ref: 70222650) $64.28

Brake Drum - 1.500 inch inside diameter, keyway, 2.860 inches wide, 7.875 inch outside diameter. For tractor models WD, WD45, WD45D, D17. (Item #: 105407, Ref: 70232585) $106.00

Brake Rod Return Spring - This Brake Rod Return Spring fits Allis Chalmers WD, WD45. It is 6-5/8 inches long. Two used per tractor. Sold individually. Replaces original part numbers 222670 and 70222670. (Item #: 125762, Ref: 70222670) $14.60

No
Picture
Brake Rod Return Spring, Used - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers OEM number 70222670, 222670, Length: 6-5/8", For a new version of this item use Item #: 125762, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435870) $8.01

Brake Shoe Anchor Pin - Overall length of 6 5/8 inches and diameter of 3/4 inch. Verify measurements. For tractor models D17 series III, WD, WD45. (Item #: 125735, Ref: 70232801) $23.30

Brake Shoe Linings with Rivets - For tractor models D-17 with serial number up to 42000, WD, WD45, WD45D. This is a set of 2 linings with rivets for one wheel. (Item #: 105403, Ref: 70276950) $18.20

Brake Shoe Return Spring - Spring is 3 3/16 inches overall length and diameter of 3/4 inch. Verify measurements. For tractor models (D17 up to serial number 42000), WD, WD45. Replaces: 70222501, 222501. (Item #: 127346, Ref: 222501) $10.30

Front Brake Spring - Fits tractor models D17 (up to serial number 42000), D19 (also used as a hydraulic oil control spring on D19 up to serial number 12850.), WD, WD45; Replaces: 70232564, 70222500, 232564, 222500. 3.1354 inch overall length, .595 inch outside diameter, .081 inch wire diameter. Two used per tractor. Sold individually. (Item #: 126497, Ref: 70232564) $6.10

Clutch

Clutch Disc - For Allis Chalmers tractor models WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70226724, 70227074, Clutch Size: 10", Clutch Hub Diameter: 1-1/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 156482, Ref: 70226764) $107.00

Clutch Disc, Remanufactured - For Allis Chalmers tractor models WC, WD, WD45, WF, Clutch Diameter - 10, Clutch Hub Diameter - 1-1/4", Clutch Splines - 10, Clutch Center - Spring or Solid, Clutch Type - Woven, (Item #: 204566) $92.01

Clutch Disc, Remanufactured - For Allis Chalmers tractor models WC, WD, WD45, WF, Clutch Diameter - 10", Clutch Hub Diameter - 1-1/4", Clutch Splines - 10, Clutch Center - Solid, Clutch Type - 4 Regular Pads, (Item #: 204567) $117.00

No
Picture
Clutch Kit - CLUTCH KIT, CONTAINS PRESSURE PLATE ASSEMBLY, 10", DISC, 10 SPLINE, 1-1/4" HUB, WOVEN DISC; RELEASE BEARING AND PILOT BEARING. TRACTORS: WC, WD, WD45, WF. (Item #: 180456, Ref: 70230506K) $582.00

No
Picture
Clutch Seal, Rear Engine - For tractor models WD, WD45. (Item #: 173168, Ref: 70222540) $21.30

Pilot Bearing - Clutch pilot bearing. For tractor models RC, WC, WD, WD45. (Item #: 100023, Ref: 70205756) $5.40

No
Picture
Pressure Plate - 10 inch Rockford Style. For tractor models WC, WD, WD45, WF. (Item #: 156481, Ref: 70230506) $190.00

Pressure Plate Assembly, Remanufactured, 70216791 - For Allis Chalmers tractor models WC, WD, WD45 (s/n 99648 - earlier), WF, Replaces Allis Chalmers OEM number 70216791, 70230506, Pressure Plate Size: 10", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 156481, (Item #: 204578) $122.01

Release Bearing - For tractors: B, IB, WC, WF, WD, WD45, WD45D, D10 (serial number 3501 and up), D12 (serial number 3001 and up), D17 (prior to serial number 75000), D19. Measures inside Diameter 2.062 inches and Outside Diameter 3.375 inches.Replaces 70204829 (Item #: 100022, Ref: 361292R91) $25.70

Transmission Clutch Center Plate - One of these plates is used on Allis Chalmers WD. The WD45 used one up to serial number 165055. Serial number 165056 and up, the WD45 uses two plates. The plate measures 7-1/16 inches outside diameter, 4-3/8 inch inside diameter. 7/32inches thick, and has 3 lugs equally spaced. Replaces 223150, 70223150, 70223150V (Item #: 70223150) $50.76

Transmission Clutch Disc - Two of these are used per tractor in the Transmission Clutch Assembly. This disc has 10 Splines and a 1.382 inch Spine Diameter. Replaces 223149 (Item #: 165350, Ref: 70223149) $173.00

Cooling System

Cooling Fan - 4 Blade, Used - For Allis Chalmers tractor models D17, D19, WC, WD, WD45, Replaces Allis Chalmers OEM number 70235753, 70240973, 227308, 240973, 4 metal blades, 16-7/8" O.D., 3-7/8" blade width, 1-1/8" pilot hole, 1-3/4" bolt holes center to center, 5/16" bolt hole diameter, For a new version of this item use Item #: 100767, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435276) $14.91

Engine Heater - For tractor models WC, WD, WD45. Not for use on Diesel Engine without By-Pass in Water Pump. Heater fits in Lower Radiator Hose. 600 Watt eases starting on cold mornings. (Item #: 107387, Ref: 5B15) $70.54

Fan Belt - This 5/8 inch belt measures 46.875 inches in length. For W, WC, WD, WD45, WF (Item #: 113936, Ref: 70209824) $16.00

Fan Blade - Fan Blade For WC, WD, WD45, D17, D19. Four Blade. (0566R) (Item #: 100767, Ref: 70235753) $19.98

No
Picture
Gasket - Thermostat - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Compatible with Allis Chalmers Lawn and Garden (s) 616, Replaces Allis Chalmers OEM number 70210158, (Item #: 164294) $8.00

Radiator - For tractor models (w SN# 74330 and up), (WF SN# 1904 and up), WD, (WD45 gas or LPG). (Item #: 101664, Ref: 70228587) $234.00

Radiator - For model WC after serial number 74330, WD, WD45. ALL GAS/LP. W226 Gas Power Unit. Radiator. Core size: 18.0 inches wide, 18.187 inches high, 3 rows of tubes, 7 fins per inch. Also replaces 70228587. Uses 70213675 temperature gauge, available separately. (Item #: 101664, Ref: 70228585) $234.00

Radiator - For Allis Chalmers tractor models WC, WD, WD45 (Gas, LP), WD45 (D), WF, Replaces Allis Chalmers OEM number 70228585, 70228587, Additional Handling and Oversize Fees Apply To This Item, (Item #: 169326) $189.00

Radiator Cap - Allis Chalmers, 228545, 228722, A39359, A45176, G45179 - For Allis Chalmers tractor models B (s/n 61221-later), C (s/n 18580-later), CA, D10, D12, D14, D15, D17, D19, D21, G, WC (s/n 74430-later), WD, WD45, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Compatible with Allis Chalmers Construction and industrial models H3, HD3, I40, I60, I400, I600 Replaces Allis Chalmers OEM number 70228545, 70228722, 70228817, 70254891, , Compatible with Case Construction and industrial models W3, 210B, 310, 320, 430, 430CK, 480, 480B, 480C, 480CK, 530, 530CK, 545, 580, 580B, 580BCK, 580C, 580CK, 584, 584C, 585, 585C, 586, 586C, Replaces Case OEM number A39359, A45176, G45179, Chrome Plated, 2.239" Inner cap I.D, 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area, 4 PSI (for pressurized systems), (Item #: 113099) $27.00

Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Item #: 110011, Ref: 70254891) $7.00

Radiator Cap, With Lever - Original style. For tractor models B, C, CA, G, WC Styled, RC, WF Styled, WD, WD45. DOES NOT FIT our radiator 70214337. Only fits original early models with UNPRESSURIZED system radiator. Also used as a gas cap for some applications. (Item #: 111025, Ref: 70207244) $29.50

Radiator Hose Clamp - This clamp is used as a radiator hose clamp on; (D17 All Gas Models and Diesel up to serial number 38963), WC, WD, WF, (WD45 Gas Models) Replaces: 921913, 910144. (Item #: 178164, Ref: 608287) $3.80

Radiator Hose, Lower - 5 1/2 inches long and 1 1/2 inches diameter. For tractor models WC, WD, WD45, WF. 70203090 (Item #: 110453, Ref: 180085M1) $6.00

Radiator Hose - Upper - For Allis Chalmers tractor models D17 (Diesel s/n 38963-earlier), WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70233153, 1.50" I.D., For Hose Clamp use Item #: 130454, (Item #: 159538) $7.00

No
Picture
Radiator Hose, Upper - Our new upper radiator hose has an inside diameter of 1.5 inches. For tractor models (D17 diesel up to serial number 38963), WC, WD, WD45, WF. Part Number: 70233153 (Item #: 109956, Ref: 2N8260) $5.80

Radiator, Premium Used - For Allis Chalmers tractor models WC, WD, WD45 (Gas/LP), WF, Replaces Allis Chalmers OEM number 70228587, 70228585, Our premium used radiators have been cleaned, inspected, and pressure checked, For a new version of this item use Item #: 101664, (Item #: 310113) $375.01

Thermostat - 180 degree. For tractor models 170, 175, B, C, CA, D14, D17, WD, WD45. All with gas engines. (Item #: 110455, Ref: 70229927) $20.80

Water Pump - Without pulley. For tractor models WC, WD, WD45, WF ALL with gas engines. replaces 70226320-R, 79016822-R, 9004298, 108317, 79009248, 226320, 250396, 70226320, 70250396. Casting# 125577, 79009248 (Item #: 104189, Ref: 79016822) $98.00

Water Pump Gasket - Used on Allis Chalmers Tractors WC, WD, WD45, WF. Also used on Industrials D, DG, M65, TL10, TL11, TL12 (Item #: 153400) $7.90

Water Pump Gasket Pump to Plate - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70210830, Pump to Plate, For water pump use 104189, (Item #: 153401) $0.98

Water Pump, Remanufactured, 70250396, 70226320, 108317 - For Allis Chalmers tractor models WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70250396, 70226320, 79003712, 79004298, 79016822, Replaces Allis Chalmers Casting number 108317, 125577, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, With Hub, Bypass Hole: 3/8", (Item #: 205276) $102.01

Decals and Emblems

$Allis Chalmers WD Decal, 2-1\2 inch Diamond, Blue Background, Mylar$
Decal, 2-1/2" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" Blue Background, Mylar decal, (Item #: 100149) $3.80

$Allis Chalmers WD Decal, 2-1\2 inch Diamond, Orange Background, Mylar$
Decal, 2-1/2" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" with Orange Background, Mylar decal, (Item #: 100148) $3.80

Decal, 6" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Blue Background, Mylar decal, (Item #: 100147) $5.60

Decal, 6" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Orange Background, Mylar decal, (Item #: 100146) $5.60

No
Picture
Decal, Blue with Border, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers w/Border, Blue, Mylar decal, (Item #: 100145) $9.30

Decal, Blue with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, W/O Border, Long A&S, Blue, Mylar decal, (Item #: 100143) $9.30

Decal Set, Black Letters - For model WD. This is a set of 10 self adhesive decals. Letters are BLACK. These are printed on Mylar, not die cut. (Item #: 184503, Ref: ACWDB) $33.30

Decal Set, Blue Letters - For model WD. This is a set of 10 self adhesive decals, BLUE letters. These are printed on Mylar, not die cut. (Item #: 182717, Ref: ACWD) $36.90

$Allis Chalmers WD Decal, Triangle, Black and Orange with White Background, 1-1\2 inch x 1-1\2 inch, Mylar$
Decal, Triangle, Black and Orange with White Background, 1-1/2" x 1-1/2", Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, 1 1/2" x 1 1/2", Black and orange on white background, Mylar decal, (Item #: 100162) $2.80

Diamond Decal, 6" Clear, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Clear Background, Mylar decal, (Item #: 100173) $5.60

WD Decal Set, Black, Mylar - For Allis Chalmers tractor model WD, Black Letters, Mylar Decals, Vinyl decal set use Item #: 100186, (Item #: 100139) $44.60

Drive Train

Final Drive Pan Gasket - This Final Drive Pan Gasket Fits: D17, WC, WD, WD45; It replaces original part numbers 247874 and 70247874. (Item #: 164307, Ref: 70247874) $18.50

Gear, Reverse Idler - 24/20 tooth. For tractor models WC, WF, (WD, WD45 serial number up to 127007). (Item #: 70226113) $77.00

Gear Shift Boot - This is an Original Style Gear Shift Boot. For Allis-Chalmers models B, C, CA, WC, WD, WD45, D10, D12, D14, and D15. (Item #: 107809, Ref: R4457) $9.50

Gear Shift Knob - This Gear Shift Knob has a 0.400 inch inside diameter hole. Fits B, C, WD, WD45, D10, D12, D14, D15, D17, D19, D21. Replaces: 226023, 70226023 (Item #: 121931, Ref: 226023) $6.80

Gear Shift Lever - This Curved Gear Shift Lever fits Allis Chalmers; WD above serial number 127006, and the WD45. It replaces original part numbers 227321, 257580, 70227321, 70257580. Does not include pins. (Item #: 111029, Ref: 70257580) $131.00

Gear Shift Lever Pins - These Standard Gear Shift Lever Pins are 0.325 inches wide on the square end and 0.250 inch round pin diameter. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 203465, 70203465. Price is for two. (Item #: 153119, Ref: 70203465) $11.60

Gear Shift Lever Pins, Oversize - These OVERSIZE Gear Shift Lever Pins are 0.375" wide on the square end and 0.285" round pin diameter. They are used to tighten up worn shift lever and must be ground to fit the existing worn lever. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 218859, 70218859 Price is for two. (Item #: 180156, Ref: 70218859) $16.00

Gear Shift Lever Pins - Pair - For Allis Chalmers tractor models B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70203465, 203465, Pin Measures 0.325" Wide Square End, 0.285" Round Pin Diameter, Used to "tighten up" worn shift lever., Must be ground to fit existing worn lever., Sold in pairs, For Standard Size Pins use Item #: 153119, (Item #: 129236) $15.50

Gear Shift Lever Washer And Snap Ring Kit - This Gear Shift Lever Washer and Snap Ring Kit retains the gear shift lever into the housing. It measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. Fits: B, C, CA, D10, D12, D14, D15, ED40, G, WC, WD, WD45, WF. Replaces retainer: 207772, 70207772 and snap ring: 207771, 202875, 70202875. (Item #: 129237, Ref: 70202875) $15.60

No
Picture
Intermediate Drive Gear, Used - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers OEM number 70227323, 227323, Teeth: 19 and 33, For a new version of this item use Item #: 111284, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435541) $95.01

Intermediate PTO Drive Gear - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers OEM number 70227323, 227323, 33 / 19 Teeth, (Item #: 111284) $36.98

Seal - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers OEM number 70218450, 450059, Lip Type, Steel, Inner Oil Seal, Inside Diameter: 1.5", Outside Diameter: 2.378", Width: 0.312", (Item #: 165044) $14.10

Third and Fourth Gear Coupling - For D17, D19, 170, 175, (WD, WD45 both serial number 127007 and up). Third and Fourth Gear Coupling (Item #: 172618, Ref: 70232452) $140.00

Transmission Shift Cover Assembly, Used - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers Casting nos 208663, Replaces Allis Chalmers OEM nos 70227322, 70257580, Cover Housing Part No. 70227322, Cover Casting No. 208663, Uses Shift Lever Part No. 70257580, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499268) $450.01

Electrical System

Alternator Bracket Kit - This Alternator Bracket Kit fits the following gas or LP: WC, WD, WD45, WF. Use with Alternator 8NE10305SE. (Item #: 178914, Ref: ACS2352) $78.00

Battery Box Lid - For Allis Chalmers tractor models B, C, CA, D10, D12, G, WD, WD45, Replaces Allis Chalmers OEM number 70210907, 210907, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126449) $40.10

Battery Box Side Cover - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, G, WD, WD45, Replaces Allis Chalmers OEM number 70222525, 2222525, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126450) $47.87

No
Picture
Brush - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, WD, WD45, Volts: 6, Quantity: 4 required, (Item #: 176922) $0.60

Coil, Wico - This Magneto Coil is for Wico Model X series magnetos. Fits models B, C, RC, WC, WD, WF. (Item #: 111196, Ref: AR12006) $99.00

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models B, C, (CA engine serial number CE-149840 and up), D10, D12, D14, D15, D17, (WC, WD, WD45 serial number 136318 and up). Replaces Delco 811735 and 70225733. (Item #: 104554, Ref: 1750411M91) $8.50

No
Picture
Distributor Dust Cover - Cover includes gasket, felt, and washer. For CA, D10, D12, D14, D15, D17, D19, WD, WD45. (Item #: 103153, Ref: 70225734) $9.00

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC. Replaces 225734 and 70225734. (Item #: 103153, Ref: 1900119) $9.00

Distributor, Rebuilt - For tractor models B, C, CA, WC, WD, WD45, WF and D14 all 1111735, 1111411 or 1111745 labeled distributor. A refundable $75.00 core charge will be added to the price. (Item #: 203555, Ref: 1111411) $265.01

Distributor, Remanufactured, Wico, XB4000 - For Allis Chalmers tractor models B, C, CA, D10, D12, RC, U, UC, WC, WD, WD45, Compatible with Minneapolis Moline tractor models R, Z, Replaces Wico manufacturer number XB4000, Includes distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, This is to change over from a magneto to a distributor, Fits 4 cylinder tang drive, (Item #: 204528) $295.01

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits tractor models B, C, IB, RC, WC, WD, WF, CA, D10, D12, D14, D17, D19, G, WD45, D15, H3, I40, I400, I500, I60, I600. With 1112461, 1112601, 1112655 1111411 or 1112607 Delco Distributor and Clip Held Cap. Replaces: bushing: 225773, 70225773, 0.005 inch shim washer: 225797, 70225797, 0.034 inch washer: 250977, 70250977, 0.010 inch shim washer: 4050123, 74050123. (Item #: 178103, Ref: ABC3007) $29.50

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Allis Chalmers with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. Replaces: 225791, 225792, 225793, 225794, 225795, 70225791, 70225792, 70225793, 70225794, 70225795 (Item #: 111468, Ref: 1904376) $14.40

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - This Electronic Ignition Kit is for Delco Distributors in the below listed models. Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. Compatible with all 12-volt negative ground systems and 6-volt systems that have been converted to 12-volt negative ground. For tractor models G, B, C, CA, WC, WD, WF, WD45, D10, D12, D14, D15 and D17. NOTE: On those models that use a Distributor Dust Shield, you may be required to drill a larger hole in the Dust Cover for the Electronic Parts to fit properly. (Item #: 105071, Ref: 1142) $155.00

Fairbanks Morse, Condenser - Services Fairbanks Morse Magneto: J1A, XCE1B, J1B, XYE1B88F, JE1A, X1-2B, J2A, XF2A, JF2A, XF2A, J2B, XF2B, JF2B, X4A, J4A, X4B, JG4A, XV4C73, J4B, XR4A, X1A, XR4B, X1B, K2A. Tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 111101, Ref: AXMR2433) $8.00

Fairbanks Morse, End Cap Cover - Services Fairbanks Morse Magneto: FM-J4, FM-OX4, FM-B1 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 105665, Ref: C800) $86.00

Fairbanks Morse, End Cap Less Gear - Services Fairbanks Morse Magneto: FM-JF2, FM-J4 magnetos. Tractors: B, C, CA, WC, RC, WD, U, UC. (Item #: 185930, Ref: CX2430) $103.00

Fairbanks Morse, Gear with Shaft - Fits cap CX2430, for Fairbanks Morse Magneto: FM-JF2, FM-J4 magnetos. Does have timing marks. For tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 178586, Ref: N5939) $67.00

Fairbanks Morse, Molded Coil - Services Fairbanks Morse Magneto: FM-JE4, FM-X4, FM-XE4 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 105656, Ref: R2477C) $77.00

Fairbanks Morse, Point Set - Services Fairbanks Morse Magneto: FM, FM-H, FM-K, FM-OH, FM-R magnetos. On tractors, B, C, CA, RC, WC, WD, U, UC. (Item #: 172889, Ref: P2437) $61.00

Fairbanks Morse, Rotor - Services Fairbanks Morse Magneto with 2 piece cap: FM-J4, JV4, XV4 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Item #: 111307, Ref: M2765) $14.90

Ground Strap - Battery cable, ground. 11 inches long. For tractor models WD, WD45. Replaces 70222510. (Item #: 115792, Ref: FAE14301B) $14.00

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit for a Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For: A, B, CA, G, WD, WD45, D10, D12, D14, D15, D17, D19, C, E, F, 60, 66, 72, 90, WF, I40, I400, I500, I60, I600, H3. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1112593, 1111708. (Item #: 103151, Ref: ATK1DCR) $9.50

Ignition Switch - Ignition Switch, with Keys. For tractor models with distributor ignition. Models: B, C, CA, D14 To Sn: 9500, WD, WD45. Replaces 225310, 70225310 (Item #: 105687, Ref: 8N3679C) $7.50

Magneto Cap - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH3001 and XB2065 Magnetos. (Item #: 182830, Ref: FXG2002A-2) $75.00

Magneto Cap - For Allis Chalmers tractor models B, C, CA, RC, U, UC, WC, WD, WF, Wico C magneto, Top cap where the plug wires connect, (Item #: 105663) $22.98

Magneto Cap - For Allis Chalmers tractor models B, C, CA, RC, U, UC, WC, WD, WF, Compatible with Case tractor models C, SC, VA, 200B, 300, 300B, 400B, Fits Minneapolis Moline 4 cylinder models, Fits Oliver 4 cylinder models, Wico X, XH, XV magneto, (Item #: 105668) $75.00

Magneto Cap Gasket - This Magneto Cap Gasket fits tractor models: B, IB, C, RC, WC, WD, and WF all with Wico magneto model: XH894. (Item #: 180203, Ref: XHGK) $4.70

Magneto Condensor - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH477B, XH1042, XH3001 magnetos. (Item #: 182833, Ref: FXH2024) $20.10

Magneto Gasket Set - FM Series - For Allis Chalmers tractor models B, C, RC, U, WC, WD, WD45, WF (all with 2 piece cap), Compatible with Minneapolis Moline tractor models R, Z (both with 2 piece cap), (Item #: 150647) $20.70

Magneto Mounting Gasket - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Item #: 111272, Ref: ABC556) $10.00

Magneto Point Set - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH477B, XH1042, XH3001, XH909 (Item #: 172995, Ref: FXH2100B) $20.70

Magneto Rotor - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits WICO XH894, XH3001, XB2065 and XH2659 magnetos. (Item #: 179184, Ref: FXG1008) $40.40

Magneto, Wico XH - Complete Magneto, includes mounting bracket. For tractor models B, IB, C, RC, WC, WD, WF, U, UC and others. Replaces Fairbanks Morse FM series. (Item #: 178601, Ref: XH894) $551.00

Resistor Kit - Resistor Kit. Used with Voltage Regulator number VR1813 when replacing a generator cut-out. For B, C, CA, WC, WD, WD45, WF. (Item #: 184930, Ref: VRK1815) $64.00

Rotor - Used with Delco distributors 1111411 1112607, and 1112609 with a clip held cap. For tractor models: B, IB, C, CA, G, D10, D12, D14, D15, D17, D19, H3, RC, WC, WD, WD45, I400, WF, I500, I600. Replaces 1921285, 225736, and 70225736. (Item #: 110177, Ref: 1750498M1) $3.60

Rotor - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, G, IB, WD, WD45 Replaces Allis Chalmers OEM number 70225736, 225736, , Compatible with Gleaner Combine (s) E, E3, K, Replaces Delco Remy manufacturer number 1921285, For Delco distributors with clip held cap, (Item #: 111111) $13.50

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. 14mm thread diameter, 3/8 inch reach, 13/16 inch hex. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type (Item #: 111743, Ref: AL295) $4.00

Spark Plug Wire Set, Custom - Fits: B, C, CA, D10, D12, D14, D15, D17, I40, I400, I500, I60, I600, IB, RC, WC, WD, WD45, WF, 170, 175, 510, 512, 514, 610, 612, 614 With Distributor Only. Replaces: 225084, 225613, 229867, 70225084, 70225613, 70229867 (Item #: 107890, Ref: S.65034) $20.00

No
Picture
Starter, 6 Volt, Rebuilt - 10 tooth, CCW Rotation Delco type Starter. For tractor models WD, WD45 Gas, both 1948-55. REBUILT Starter. 6 Volt. (Item #: 203157, Ref: 1107951) $329.60

Starter Armature - Fits Delco starter numbers: 1107006, 1107017, 1107024, 1107025, 1107029, 1107030, 1107035, 1107036, 1107043, 1107044, 1107045, 1107046, 1107059, 1107064, 1107094, 1107096, 1107127, 1107162, 1107165, 1107200, 1107409, 1107423, 1107436, 1107466, 1107472, 1107474, 1107820, 1107822, 1107823, 1107824, 1107905, 1107951, 1107962, 1108036, 1108059, 1108072, 1108093, 1108099, 1108109, 1108162, 1108167, 1108176. Verify Starter number before ordering. (Item #: 178583, Ref: 1872505) $69.00

Starter Drive - For tractor models 6 volt 10 teeth D-12, D-14, WC, WD, WD45, WF, D-10 SN# <3501. Replaces 1859020, 1868804. (Item #: 107059, Ref: 74044454) $32.00

Starter Drive - Starter Drive - WC, WF, WD, WD45 (models using Delco 1107017 or 1107951) - D10, D12, D14 (models for 1957-1960 using Delco 107474 or 1107466). Replaces 1868804. (Item #: 107059, Ref: 565549) $32.00

Starter Drive Housing - For tractor models B, IB, C, CA, RC, WC, WD, WD45, D10, D12, D14. All with Delco starters 1107466, 1107006, 1107017, 1107024, 110743, 1107044, 1107045, 1107046, 1107096 or 1107951. (Item #: 150733, Ref: 1879156) $127.00

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For models WC, WF, WD, WD45 using Delco starter 1107017 or 1107951. Also for models D10, D12 and D14 using Delco starter 107474 or 1107466. Replaces 1868804. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $59.94

Starter Drive Parts - Complete unit available as 356037R91 (Item #: 178541, Ref: SPD12) $139.00

Starter Drive Spring - Starter drive spring For B, C, CA, D10, D12, D14, WC, WD, WD45, WF. (Item #: 111718, Ref: 1860639) $31.00

Starter Repair Kit - Starter Repair Kit. Tractors: WD, WD45 with starter 1107951. WC and WF with starter 1107017 (Item #: 182517, Ref: SRK110) $32.28

Starter Switch - Manual Foot Switch. For tractor models B, C, CA, G, RC, (WC serial number 74330 and up), WD, WD45, (WF serial number 1904 and up). This switch will work only on the Delco starter and will not replace the 70222880 Autolite switch. Replaces 70226128, 70217292, 70226126. (Item #: 105669, Ref: 1925781) $9.00

Starter Switch Lever - For Allis Chalmers tractor models B (s/n 113779-later), CA, G, IB (s/n 1879-later), WD, WD45, Replaces Allis Chalmers OEM number 70225587, 70217291, Pull rod type starter switch, (Item #: 108069) $9.40

Starter, Used - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers OEM number 140-045, 4364, 44-9660, 70225890, 91-01-4023, 1107951, Engine(s): 201, 226, Voltage: 6, Rotation: CCW, Teeth: 10, For a Remanufactured version of this part use Item #: 203157, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403157) $117.01

Tune-up Kit - for 4 Cylinder Gas Engines. Includes spark plugs (Autolite 295 or equivalent), points, condenser and rotor. For AC tractors using 14 mm, 3/8 inch reach, 13/16 inch hex spark plug. Fits CA, WD, WD45, D10, D12, D14, D15, D17 except with Delco Distributor number 112688. Verify correct spark plug size and type. (Item #: 111815, Ref: ACTK1) $27.30

No
Picture
Voltage Regulator, 12 Volt - 4 Post. For tractor models D15, WD, WD45 all with diesel engines. Replaces 110327, 1100322, 1100994. (Item #: 105588, Ref: 568816) $33.90

Voltage Regulator, 6 Volt - Voltage Regulator, 6 volt, positive ground, saddle mount, 4 terminal. For tractor models B, C, CA, IB, WC, WD, WD45, WF. Replaces Allis Chalmers: 4514722, 74514722. Replaces Delco: 1118265, 1118305, 1118786, 1118790. (Item #: 105284, Ref: VR1813) $33.00

Wico X Series Magneto Rebuild Kit - This Magneto rebuild kit is for the Wico X Series magneto. This magneto was used on model B, C, IB, RC, WC, WD and WF. Kit contains Cover gaskets, points, condenser, felt wipers, points and condenser screws, bearing seal, rear bronze bushing, oil slinger, impulse plate gasket, mounting gasket, dust cover unit gasket, ground connecter, inspection window, inspection window gasket. Depending on the magneto number, some of these parts may not be required. (Item #: 133558, Ref: ABC3723) $61.00

Wiring Harness, Complete - Includes engine harness, light harness, instructions. For Tractor systems with a cutout relay. For tractor models WD, WD45 both with gas engines. Replaces: 208337, 224635, 70208337, 70224635, Main Harness: 222532, 70222532 (Item #: 132891, Ref: 600460) $225.51

Wiring Harness, Main - For WD and WD45. Cloth covered harness is manufactured to restoration standards. Main harness does not cover light, accesories, etc. (Item #: 182824, Ref: 222532) $92.87

Engine Bearings

Cam Bearing, Gas Engine - Set of 3. For W, WC, WF, W25, WD, all with 201 CID 4 cylinder Gas Engine. For WD45 and D17 with 226 CID 4 cylinder Gas Engine. (Item #: 105957, Ref: 70229953) $43.00

Connecting Rod Bearing - .002" Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201, 226, Bearing size: .002" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105946, (Item #: 105942) $17.50

Connecting Rod Bearing - .030" Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201, 226, Bearing size: .030" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105946, (Item #: 105945) $16.50

Connecting Rod Bearing - .040" Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201, 226, Bearing size: .040" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105945, (Item #: 105946) $17.50

Main Bearings - .040" Oversize - Set - For Allis Chalmers tractor models WC, WD, WD45, Compatible with Allis Chalmers Engine (s) 201, 226, Bearing size: .040" oversize, Sold in complete sets, For Standard main bearing use Item #: 105950, (Item #: 105951) $170.00

No
Picture
Main Bearing Set, 201and 226 CID Gas, .010 - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas. (2.43" journal) Size is .010. This is 1 complete set for engine. (Item #: 105948, Ref: 70228620-010) $134.00

No
Picture
Main Bearing Set, 201 and 226 CID Gas, .020 - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas. (2.43" journal) Size is .020. This is 1 complete set for engine. (Item #: 105949, Ref: 70228620-020) $134.00

No
Picture
Main Bearing Set, 201 and 226 CID Gas, .030 - For tractor models W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas. (2.43" journal) Size is .030. This is 1 complete set for engine. (Item #: 105950, Ref: 70228830) $126.00

No
Picture
Main Bearing Set, 201 and 226 CID Gas, STD - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas. (2.43" journal) Size is STD. This is 1 complete set for engine. (Item #: 105947, Ref: 70228620) $106.00

Rod Bearing, .010 - .010 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). Single bearing. 4 required per engine. Replaces 70231126 (Item #: 105943, Ref: CRK-AW-010) $17.60

Rod Bearing, 201 Gas, .010 - Individual connecting rod bearings. .010 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Item #: 105943, Ref: 231125-010) $17.60

Rod Bearing, 201 Gas, .020 - Individual connecting rod bearings. .020 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Item #: 105944, Ref: 231125-020) $12.10

Rod Bearing, 201 Gas, STD - Individual Connecting Rod Bearings. Standard. For tractors: W, WC, WF, WD, WD45G, D17G, 170G, B, C, CA, RC. (Item #: 105941, Ref: 231125) $14.40

No
Picture
Rod Bearings, Early - For the early models with 2 inch journals. Only available in Standard. For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas This is 1 pair for 1 rod. Order 4 for complete engine. Oversize of .005 may be available.... call for availability. (Item #: 70223619) $25.73

No
Picture
Rod Bearing Set - For W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). Available in standard, .010 or .020. Specify size when ordering. (Item #: 183874, Ref: CRK-AW) $56.00

No
Picture
Rod Bearing Set, .020 - .020 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Item #: 184565, Ref: CRK-AW-020) $112.00

Rod Bearing Set, Standard - For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Item #: 183874, Ref: CRK-AW) $56.00

Engine Gaskets

Belt Pulley Gasket - For Allis Chalmers tractor models WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70202289, (Item #: 164310) $24.50

No
Picture
Crankshaft Rear Seal - This 2 piece rear crankshaft felt seal is for the 201 gas engine in models WC, WD, WF, W25. This is a 2 piece soft seal. (Item #: 105962, Ref: 70227120) $7.90

Crankshaft Seal, Front - This Front Crankshaft Seal is 2.01 inches outside diameter. If you need one that is 1.9375 inches outside diameter, you need part number 70225806. For tractor models (60H, B, B15, C, CA, IB all with engine serial number CE-177730 and up), W25, WC, WD, WF. Replaces 70226620, 70275814, 72090149. (Item #: 105882, Ref: 70224929) $9.60

Full Gasket Set - For W, WC, WD, WF all with 226 CID gas engine. Comes with crank seals. (Item #: 105958, Ref: FS3162) $106.00

Head Gasket - Cylinder Head Gasket. For tractors: W, WC, WF, WD, WD45, D17, 170. All with gas engines. (Item #: 172517, Ref: 70229406) $46.70

Head Gasket Set - For GAS engine in: D17, W, W25, WC, WD, WD45, WF, 170, 175. Includes Upper gasket set with head gasket. (Item #: 105959, Ref: 70277286) $61.00

Intake and Exhaust Manifold Gasket Set - For tractor models D17, WC, WD, WD45, all with gas engine. Replaces 299958, 70229958 (Item #: 101480, Ref: 70229958) $15.30

Oil Filter Gasket - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D17, IB, RC, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70204863, 70207882, 70232522, 70233228, Length: 4-13/16", Tall: 1-1/2", Center to center mounting holes: 3-1/2", Rubberized Cork, (Item #: 164309) $6.10

Oil Pan Gasket - 6 piece pan gasket set. For 201 and 226 CID 4 cylinder gas engines on: W, WC, WF, W25, WD, WD45, D17, 170. (Item #: 105960, Ref: 70229860) $12.90

Oil Pan Gasket Clips - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, 175, Replaces Allis Chalmers OEM number 70229177, Set of 6, (Item #: 164311) $34.80

Push Rod Cover Gasket - For tractors: WD, WD45. Both with gas engines. (Item #: 179976, Ref: 70218604) $13.80

Timing Cover Gasket - Used on Allis Chalmers Gas and LP models: D17, WC engine serial number above 72459 with 15 stud head, WD, WD45, WF engine serial number above 72459 with 15 stud head, 170, 175. Replaces 70277291, 70233214, 233214 (Item #: 187405, Ref: 70233214) $13.20

Valve Cover Gasket - GASKET. For tractor models D17, W, W25, WC, WD, WD45, WF. All with gas engines. (Item #: 128609, Ref: 70255297) $15.70

Engine Rebuild Kits

Basic Engine Kit - For W, WC, WF, W25, WD with 201 CID 4-cylinder gas engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, and overhaul gasket kit. No bearings. (Item #: 130505, Ref: BEKA1120-LCB) $657.00

No
Picture
Basic In-Frame Overhaul Kit - Basic In-Frame Kit for 201 CID 4 cylinder gas engine, overbore from 4 inches to 4-1/8 inches. Contains: PK120 sleeve and piston kit with rings and pins, 70277286 upper gasket set with head gasket, 70229860 oil pan gasket kit. For W, W25, WC, WD, WF. (Item #: 184733, Ref: BIFA1120) $578.00

Cylinder Head Valve Overhaul Kit - Contains intake and exhaust valves, springs, guides and retainers. For tractor models W, WC, WF, W25, WD (with 4-cylinder 201 CID gas engines) and WD45 (with 4-cylinder 226 CID gas engine) Fits Models w/ .100" Lock Groove. (Item #: 184494, Ref: VOKA201) $184.00

Engine Parts

No
Picture
Connecting Rod Shim Set - For Allis Chalmers tractor models WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70204720, Set of 8 shims, (Item #: 174276) $93.20

No
Picture
Connecting Rod, Used - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Replaces Allis Chalmers OEM nos 70232569, Replaces Allis Chalmers Casting nos 232441, U3988, 232569, 229861, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454760) $50.01

Crankshaft Pulley - This new Crankshaft Pulley Double has double groove for power steering with cone shaped allen screw. It fits with or without power steering. It has Drive Lugs For Hand Crank. Fits WD, WD45. Replaces: 227395, 70227395 (Item #: 118292, Ref: 70227395) $195.00

No
Picture
Crankshaft, Remanufactured, U3986 - For Allis Chalmers tractor models WC, WD (both gas), Replaces Casting number U3986, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200003) $283.01

No
Picture
Cylinder Head, Remanufactured, U3001 - For Allis Chalmers tractor models WC, WD (using 15 head bolts), Replaces Allis Chalmers Casting number U3001, Not a Welded Head, 3" head, Engine (s): 201, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200026) $760.01

Cylinder Head, Used - For Allis Chalmers tractor models WC, WD (using 15 head bolts), Replaces Allis Chalmers Casting number U3001, 3" head, Engine(s): 201, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200026, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400026) $349.01

Cylinder Head, Used - For Allis Chalmers tractor models WC, WD (Using 12 bolt head), Replaces Allis Chalmers Casting nos U3001, 3" head, Engine(s): 201, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499353) $349.01

No
Picture
Driven Gear, Used - For Allis Chalmers tractor models D17, WD, WD45, 170, 175, 190, 190XT, Replaces Allis Chalmers OEM nos 70232409, Teeth: 37, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437606) $165.01

No
Picture
Front Crankshaft Seal - For Allis Chalmers tractor models B (s/n 177730 and later), C (s/n 177730 and later), CA (s/n 177730 and later), WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 240319-P, 70224929, Outside Diameter: 2.010", (Item #: 173659) $11.72

Governor Weight - This Governor Weight D17, WC, WD, WD45, WF, 170, 175 with 201 or 226 cubic inch 4 cylinder gas with engines. Replaces: 229980, 70229980 (Item #: 164568, Ref: 70229980) $30.00

Governor Weight Pin and Clips - This Pin with Clips is used to secure part number 70229980. Two used per tractor. Sold individually. Replaces part numbers 70211368, 70207719, 211368, 207719 (Item #: 164569, Ref: 70211368) $10.80

Hand Crank Holder Brackets - Both Front and Rear Clips. For tractor models RC, WC, WD, WD45, WF. (Item #: 178485, Ref: 208443) $26.20

Hand Crank, Starter - With Spinner. For tractor models WC, WD, WD45, WF, RC. Replaces U3972. (Item #: 179433, Ref: 70216933) $96.57

No
Picture
Lifter, Used - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Replaces Allis Chalmers OEM nos 70203017, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454263) $5.01

No
Picture
Main Shaft Collar - Splined, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70230514, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453867) $118.01

No
Picture
Main Shaft Collar, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70225944, Splined, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453862) $161.01

No
Picture
Main Shaft Coupler, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45, 170, 175, Replaces Allis Chalmers OEM number 70232452, Spline Count: 8, For a new version of this item use Item #: 172618, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453868) $73.01

No
Picture
Main Shaft Gear - 1st and 2nd, Used - For Allis Chalmers tractor models D17, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM number 70232532, Teeth: 34, For a new version of this item use Item #: 172764, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453863) $103.01

No
Picture
Main Shaft Gear, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70226718, Teeth: 40, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453861) $480.01

Pushrod - Pushrod, new. Sold individually. 11.017 inch overall length, 0.314 inch outside diameter. D17, WC, WD, WD45, WF, 170, 175 (with 201 CI, 226 CI gas/LP engines). Replaces: 70203018, 203018. (Item #: 178869, Ref: 70203018) $39.60

No
Picture
Push Rod, Used - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 175, Compatible with Allis Chalmers Engine(s) 201, 226 Replaces Allis Chalmers OEM number 70203018, , Compatible with Gleaner Combine(s) E, For a new version of this item use Item #: 178869, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454262) $10.01

Ring Gear - Starter Flywheel Ring Gear. For tractor models WC, WD, WD45, WF. 12.68 inches outside diameter. 11.725 inside diameter. .50 inch thick, 100 tooth. (Item #: 100081, Ref: 70208132) $47.30

Rocker Arm Support Stand - This new Cast Rocker Arm Support Stand fits D17, WD45, 170, 175 (WD, WF (engine serial number 253200 - 253489). Fits models above with 201 and 226 cubic inch gas engines; 4 used per tractor. Sold individually. Measures 1.945 inches tall with a 0.865 inch hole diameter. Please measure before ordering. Replaces Replaces: 224727, 225019, 70224727, 70225019. (Item #: 126110, Ref: 70225019) $40.00

Valve, Exhaus - For W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 and D17 with 226 CID 4 cylinder Gas engine. (Item #: 128607, Ref: 70241527) $12.70

Valve Guide - Exhaust - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201 (gas), 226 (gas), Replaces Allis Chalmers OEM number 70229911, (Item #: 128625) $4.30

Valve Guide Intake - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Engine (s) 201, 226, Replaces Allis Chalmers OEM number 70241536, (Item #: 128643) $5.30

Valve, Intake - This is and individual intake valve, For W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 and D17 with 226 CID 4 cylinder Gas engine. 4 required per engine. Sold individually. (Item #: 128620, Ref: 70209132) $11.80

Valve Rotator, Exhaust - Used on the following engines when equipped with Exhaust Valve Rotators: B116, B125, G138, G149, G160, W201, G201, G226, W226. Replaces OEM numbers 70224926V, 70224926, 224926. (Item #: 184379, Ref: 70224926) $32.00

Valve Spring - This valve spring is used on 125, 149, 201, 226 engines, on Allis Chalmers B, C, CA, D10 (series II), D12 (series II), D14, D15 (series II), D17, WC, WD, 170. Replaces 70206879, 206879 (Item #: 128606) $3.60

No
Picture
Valve Train Kit with Valve Rotators, 45 Degree Intake Valves - For Allis Chalmers tractor models WC, WD, WD45, WF, Compatible with Allis Chalmers Construction and industrial models D, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201, 226, Replaces Allis Chalmers OEM number 470229911, 470241527, 470241536, 470209132, 470224926, 470206879, NT20077, Kit Includes: (4) 470229911 Valve Guides, (4) 470241527 Exhaust Valves, (4) 470241536 Valve Guides, (4) 470209132 Intake Valves, (4) 470224926 Valve Rotators, (8) 470206879 Valve Springs, And (16) NT20077 Valve Keepers, (Item #: 182188) $230.00

Engine Pistons and Sleeves

No
Picture
Piston Sleeve - For 4 1/8 inch bore piston. For tractor models (170, 175, D17 gas), W25, WC, WD, WD45, WF. (Item #: 173058, Ref: SW32) $73.00

No
Picture
Sleeve and Piston Kit, For Single Cylinder - Contains sleeve, piston, pin, retainers, top chrome and oil control ring set. Overbore from 4 inches to 4-1/8 inches. For tractor models W, WC, WF, W25 and WD with 201 CID 4-cylinder gas engines. For a single cylinder (Item #: 128668, Ref: PK120) $136.00

Engine Rings

Piston Ring Set - For one piston. 4 inch standard bore. Comes with 3 compression rings 1/8 inch and 1 oil ring 3/16 inch. For tractor models (W, W25, WC, WD, WF all with 201 CID gas engines), (WD45, 170, D17 all with 226 CID gas engines). (Item #: 120692, Ref: 70230091) $36.20

Piston Ring Set - 4.125" Overbore - Single Cylinder - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201 (gas), 226 (gas), Compatible with Gleaner Combine (s) E, E3, Compatible with International tractor models Super M, Super W6, W400, 400, Compatible with International Engine (s) C264 (gas), Overbore: 4.125", Compression Rings per Piston: (1) @ .094" and (2) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 4.125" Overbore - 4 Cylinder use Item #: 174370, (Item #: 120693) $47.60

Piston Ring Set - 4.125" Overbore - Single Cylinder - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201 (gas), 226 (gas), Compatible with Gleaner Combine (s) E, E3, Compatible with International tractor models Super M, Super W6, W400, 400, Compatible with International Engine (s) C264 (gas), Overbore: 4.125", Compression Rings per Piston: (2) @ .094" and (1) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 4.125" Overbore - 4 Cylinder use Item #: 174375, (Item #: 120694) $45.80

No
Picture
Piston Ring Set, For a Single Piston - Overbore 4-1/8 inches for 201 CID 4 cylinder gas engine. Contains 3 compression rings at 3/32 inch, 1 oil ring at 1/4 inch. For tractors: W, WC, WF, W25, WD. For 262, D19, GLEAMER C. (Item #: 120854, Ref: PRS120) $22.80

No
Picture
Piston Ring Set, For Single Cylinder - Piston Ring Set for WD, WD45, D17 with 4 1/8 inch bore piston, 2 Compression at 3/32, 1 Compression at 1/8 inch, and 1 Oil at 1/4 inch. For a single piston. (Item #: 174375, Ref: 2C7794) $164.00

Exhaust System

Exhaust Stack, Chrome - This is a Chrome Straight Stack, Double Walled. 29 inches tall. 3 1/2 inches outside diameter. Vertical Exhaust Stack for Allis-Chalmers GAS ENGINE models: WC, WD, WD45, and D17 to serial number 42000. (Item #: 179370, Ref: R4446) $216.44

Exhaust Stack, Chrome - Curved, double wall, Chrome Stack. 29 inches tall. 3 1/2 inch outside diameter. For GAS Models: WC, WD, WD45, D17 to serial number 42000. (Item #: 180753, Ref: R4447) $231.00

Intake and Exhaust Manifold - For D17 series III, WC, WD, WD45, all with gas engine. Intake and Exhaust Manifold, non threaded outlet. Manifold has improved larger throat. Uses Muffler part number 70234494. Also replaces OEM number 70224782. Gasket set part number 70229958, included in this set. (Item #: 101479, Ref: 70229416) $142.00

Manifold Stud - Manifold Stud. Fits tractor models WC, WD, WD45 (Early), WF (Gas Only). 4-1/2 inches coarse threads both ends, 3/8 inch diameter. 6 used per engine, sold individually. Replaces: 203072, 70203072. (Item #: 113681, Ref: 70203072) $7.30

Muffler - Used on WC engine serial number 106509 and up, WD Gas 1948 - 1953, WD45 Diesel, this muffler measures Shell Diameter - 3-1/4 inches, Inlet length - 2-1/2 inches, Inlet O.D. - 1-3/4 inches, Shell length - 16-1/2 inches, Outlet length - 10 inches, Outlet O.D. - 1-3/4 inches, Overall length - 29 inches. Replaces 70219534, 219534 (Item #: 100042, Ref: 70210137) $31.20

Muffler - Muffler, includes clamp and bracket. Gas and diesel. 2-1/2 inch inlet length, 1-5/8 inch inlet inside diameter, 16-1/2 inch shell length, 10 inch outlet length, 1-3/4 inch outlet outside diameter. For D17, WD, WD45. Type of clamp may vary slightly from the picture. (Item #: 100044, Ref: 70229531) $44.00

Fuel System / Air Intake

Air Cleaner Cap - 1-3/4 inch. For tractor models WD, WD45, W6, D15. (Item #: 111924, Ref: 70208222) $19.60

No
Picture
Air Cleaner Cap, Used - For Allis Chalmers tractor models D15, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 208222, 70208222, 1-3/4" Base ID, For a new version of this item use Item #: 111924, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435571) $11.01

Air Cleaner Hose - Hose, air cleaner to carburetor. For tractor models WC, WD, WF. Measures 1.472 inch inside diameter and 8 1/4 inches in length. (Item #: 156660, Ref: 70208114) $9.80

Air Cleaner Hose Clamp - This clamp is used on B, C, CA, D10, D12, D14, RC, WC, WD as an air cleaner hose clamp. Works for hose outside diameter from 1 3/4 inches to 2 inches. It Replaces: 921913, 910144. (Item #: 178164, Ref: 608287) $3.80

Carburetor - Aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, 9706. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. (Item #: 185128, Ref: 12522B) $286.00

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: B, B-15, C, D10, D12, CA 1952-56, IB, R, W, WC, WD Crawler. Replaces TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, 9706. This carburetor comes with studs that attach to carburetor. THIS WILL NOT WORK IN THOSE APPLICATIONS THAT STUDS MUST BE USED IN THE MANIFOLD. 2 5/16 InchES CENTER TO CENTER ON MOUNTING BOLTS. Made in USA, 1 year warranty. (Item #: 100747, Ref: 12522) $480.00

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carburetor replacing the Marvel TSX701, TSX670, TSX815, TSX844 used on: 1957-CA, D14 1956 and up, D15, H-3 and T-102 Crawlers, T-100 crawler. Also replaces a 9707 and 213348 on a AC WD and WD45. Center to center on 2 mounting bolts is 2 5/16 inches. Made in USA, 1 year warranty. (Item #: 100748, Ref: 12566) $426.00

Carburetor Float - This carburetor float is 2.25 inches wide and is used for the following Zenith carburetor models: 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981 and for tractor models: B, C, CA, D10, D12, WC, and WD. (Item #: 108454, Ref: CTP28) $16.20

Carburetor Float - For tractor models B, C, CA, RC, WC, WF, D14, D15. Carburetor Float for Marvel Schebler with small bowl. Carbs: TSX138, TSX422, TSX154, TSX159, TSX186, TSX264, TSX305, TSX363, TSX380, TSX422, TSX470, TSX486, TSX670, TSX701, TSX815, TSX844. (Item #: 108449, Ref: 9N9550A) $9.60

Carburetor Float - For tractor models WD, WD45, D17, 175. Carburetor Float for Marvel Schebler Large Bowl measures 2 3/4 inches at widest point: TSX561, TSX773, TSX869, TSX871, TSX928. Replaces OEM part number 70226456. (Item #: 105095, Ref: R2383) $19.50

Carburetor Fuel Needle - Main Jet Adjusting Needle Assembly for Zenith carburetor series 61 and 62, model numbers: 9707, 10981, 12401, 12749, 13876, 225621. For D10, D12, W, WC, WD, WF. (Item #: 108462, Ref: 71-28) $12.60

Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4-5/16 inch. B, C, CA, D14, D15, IB, RC, WC, WD, WF, H3 with the following carburetors: TSX114, TSX138, TSX154, TSX155, TSX159, TSX186, TSX253, TSX264, TSX305, TSX363, TSX380, TSX42, TSX422, TSX43, TSX470, TSX474, TSX486, TSX653, TSX668, TSX670, TSX701, TSX74, TSX815, TSX844, TSX94, TSXU828, TSXU829, TSXU831, TSXU832 Replaces part numbers 70219976, 70219995, 70219998, 70222048, 70222053, 70222053V, 70233209 (Item #: 182465, Ref: 9N9502) $4.20

Carburetor Kit, Basic - For ZENITH carbs 9797A, 9797C, 10981A, 8979, or Allis Chalmers carbs 213348-3, 224749, 209312 For tractors: WC, WD, WF. (Item #: 112435, Ref: BK25V) $38.70

Carburetor Kit, Basic - FOR MARVEL SCHEBLER CARBS TSX159, TSX422 OR ALLIS CHALMERS CARBS 222088, 224750 For W, WC, WD, WF (Item #: 112446, Ref: BK27V) $32.50

Carburetor Kit, Basic - Kit for Zenith 8561, 8691, 9636, 9635, 9804, 9805, 106977, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 11142, 12401, 12749, 8781, 8979, 9707, S1203, 10981 carbs used on B, C, CA, D10, D12, WC, WD. (Item #: 100738, Ref: Z101) $27.40

Carburetor Kit, Basic - Kit for Marvel TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX670, TSX701, TSX815, TSX844 carbs used on B, C, CA, D14, D15, WC, WD. (Item #: 100733, Ref: MS101) $15.60

Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models B, B15, C, D10, D12, CA, IB, R, W, WC, WD. (Item #: 186565, Ref: K2119) $47.80

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 13876, 12522, 12522B. (Item #: 183586, Ref: BK44V) $27.60

Carburetor Kit, Complete - For W, WC, WD, WF with Marvel-Schebler TSX159, TSX422, or Allis Chalmers carburetors 222088, 224750, 70222088, 70224750. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. (Item #: 113809, Ref: C527V) $38.50

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 10981A. For the following tractor models: WC, WD. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203364, Ref: 1115-CARB) $406.01

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX159, TSX422. For the following tractor models: WC 1938 and UP, WD, WD45. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203227, Ref: 1116-CARB) $225.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 9707, 213348. For the following tractor models: WD, WD45. NOTE: We MUST have either your original carburetor part number or the distance center to center between the mounting studs on the manifold. Two different size carburetors were used on these tractor models. Specify in Comments Box when ordering. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203229, Ref: 1118-CARB) $235.01

No
Picture
Carburetor, Rebuilt - This rebuilt Zenith carburetor is a replacement for 12522. Replaces Marvel numbers TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. A $50.00 core charge will be added to the price and is refundable when you send your core to us and it is verified to be a rebuildable core. You will receive instructions for returning your core for a refund if you have one available. (Item #: 203219, Ref: 12522R) $225.01

Carburetor Repair Kit - Complete carburetor repair kit for Zenith carburetors 10981, 10981A, 209312, 213348, 224749, 8979, 9707, 9707A, 9707C or Allis Chalmers Carb 209312. For tractor models WC, WD and WF. (Item #: 119445, Ref: C525AV) $38.30

Complete Carburetor Kit - For Allis Chalmers tractor models WC, WD, WF, For 9797A, 9797C, 10981A, 8979, 213348-3, 224749, 209312 Carbs, (Item #: 112434) $41.70

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor.Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces 70237945 and 237945. Will fit the following models: B, IB, C, CA, G, D10, D12, D14, D15 (Gas To Sn#9001), D17 (Gas to Sn#42000), D19 (Gas To Sn#12000), RC, WC, WD, WD45, I400, WF, I600 (Gas), 170 (Gas), 175 (Gas), 180 (Gas). (Item #: 105382, Ref: 9N9162) $3.20

Fuel Tank Cap - For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Item #: 185782, Ref: D5NN9030A) $9.10

Sediment Bowl Assembly - Small Bowl, 2 outlet type. A 1/8 Inch Pipe Plug will be needed if only one outlet is used. For Models: D10, D12, WC, WD, WD45, D15D, D17, D19, D21, 180, 170 diesel. (Item #: 105369, Ref: 70239167) $22.20

Sediment Bowl Gasket - 2" - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15 (gas, s/n 9001-earlier), D17 (gas, s/n 42000-earlier), D19 (gas, s/n 12000-earlier), G, IB, RC, WC, WD, WD45, WF, 170 (gas), 175 (gas), 180 (gas) Replaces Allis Chalmers OEM number 70208362, 208362, , (Item #: 105372) $1.40

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Item #: 105364, Ref: 49923D) $3.30

Steering Shaft Bushing - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers OEM number 70222447, 222447, 0.900" inside diameter, 1.009" outside diameter, 0.057" thick, 0.987" length, (Item #: 112464) $18.70

Throttle Lever Friction Block - For tractor models WC, WD, WD45, WF. 1.245 inches overall length. 1.225 inches wide. 0.500 inch inside diameter. Replaces 222454, 70222454. (Item #: 112465, Ref: 222454) $15.00

Throttle Lever Knob - For tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Item #: 112466, Ref: 220901) $7.20

Throttle Quadrant - Comes with bushing. For tractor models WD, WD45. Replaces: Bushing: 222447, 70222447, Quandrant: 227004, 70227004 (Item #: 112467, Ref: 227004) $107.14

Throttle Return Spring - This Throttle Return Spring fits Allis Chalmers WD and WD45 Gas tractors. It is 6-7/8 inches overall length and replaces original part numbers 220923 and 70220923. (Item #: 179417, Ref: 70220923) $20.17

Gauges

Ammeter - For tractor models B, C, CA, RC, WC, WD, WD45, WF. (Item #: 111040, Ref: 70275840) $16.30

Amp Meter - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, RC, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70254407, (Item #: 162433) $10.00

Oil Gauge - Oil pressure gauge. For IB, B, C, CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF (Item #: 102135, Ref: 70207834) $17.90

Oil Pressure Gauge - White Face. 30 psi, engine mounted. For tractor models B, IB, C, CA, G, RC, WC, WF, WD, WD45. Replaces 70207834. (Item #: 100075, Ref: 207834) $19.50

Oil Pressure Gauge - For tractor models B, C, CA, WC, WD, WD45. This oil pressure gauge reads up to 50 psi and has a 2" body. Replaces 70226967, 70228719, 9A550. (Item #: 150623, Ref: 9N9273A) $15.60

Oil Pressure Gauge 1940-49 - Black Bezel, White Face. No studs. For tractor models B, IB, C, CA, WD, WF, WC, WD45. Replaces: OEM numbers 70207834H, 70207834V and 70207834. (Item #: 100076, Ref: 2348803-B) $14.98

Oil Pressure Gauge 1949-57 - Orange Bezel, White Face. Replaces OEM number 70207834H. No studs. For tractor models B, IB, C, CA, WD, WF, WC, WD45. (Item #: 121599, Ref: 2348803-O) $18.90

Temperature Gauge - For tractor models B, C, CA, RC, WC, WD, and WD45. Stem is 3 3/8 inch overall length. This gauge screws into top radiator hose inlet. (Item #: 100077, Ref: 70213675) $29.50

Traction Booster Gauge, Fully Functioning - WORKING booster gauge. For tractor models CA, WD, WD45, (D10 up to serial number 9199), (D12 up to serial number 9167), D14, (D15 up to serial number 9000), (D17 up to serial number 75000), D19. Replaces 228977, 226631, 70226631, 235598, 70235598, 70228977. (Item #: 103880, Ref: 70228977) $105.00

Hitch / Drawbar

Drawbar Guide Assembly - This Drawbar Guide Assembly fits WD and WD45. It replaces original part numbers 223187, 226522 and 7022652. (Item #: 126339, Ref: 70226522) $233.04

Lift Arm Latch Coupler Spring - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XT, Replaces Allis Chalmers OEM number 70235881, 70327360, 235881, 327360, Overall Length 3-1/4", (Item #: 126680) $6.30

Three Point Hitch - Category 2, this new Three Point Hitch bolts onto drawbar (Leave your drawbar on). Fits D14, D15 Series I, D17 Series I and II, WD, WD45. This kit will also fit D15 Series II and D17 Series III with no swayblock.**$175.00 ADDED TO SHIPPING DUE TO WEIGHT/SIZE.** (Item #: 112134, Ref: ACS014) $478.58

Three Point Hitch - Category I. This Three Point Hitch is used on Allis Chalmers D14, D15, WD, WD45. Lift arms: 5/8 inches thick x 3 inches wide, Easy to install and remove. Snap coupler drawbar must be removed to install. Adjustable uprights attach to snap couplers (which are not included). Top link and top link bracket not included. Additional $110.00 shipping due to weight. (Item #: 180778, Ref: ACS011) $857.14

Top Link Bracket - Bolting around existing rockshaft, this bracket allows you to add a top link to your Allis Chalmers CA, WD or WD45 tractors. (Item #: 113400, Ref: ACS016) $60.00

Hydraulic System

Dipstick - For Hydraulics/Transmission. For tractor models CA, D10, D12, WD, WD45. (Item #: 126536, Ref: 224611) $30.90

No
Picture
Hydraulic Lift Cylinder, Used - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers OEM nos 70226539, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452752) $112.01

Lights

Bullet Tail Light - This Bullet style Tail Light is for models B, C, CA, G, WD, WD45, D10, D12, D14, D15. Bullet Tail Light. 6 Volt with Glass Lense. Also available in 12 Volt, order PART R4383 Instead. (Item #: 105309, Ref: R4384) $48.80

Bullet Tail Light - 12 Volt - For B, C, CA, G, WD, WD45, D10, D12, D15. Bullet Tail Light. 12 volt with glass lens. Also available in 6 volt, order part number R4384 instead. (Item #: 105310, Ref: R4383) $49.80

Headlight, 12 VOLT - 12 Volt 5 inch diameter light With 8.5 inch mounting tube. For WC, WD, WD45, RC. OEM number 210204. (Item #: 183792, Ref: 1030005) $52.50

Headlight Assembly, 6 Volt - For tractor models D10, WC, WF, WD, WD45. For 12 volts application, order 151842 12 volt replacement bulb. (Item #: 105308, Ref: 70236969) $54.00

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: B, C, CA, RC, WC, WD, WD45, WF, (D10, D12, D14 early, with bulb style light), D15 up to serial number 9001. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

Light Switch - 3 Position - Fits B, C, CA, G, IB, RC, WC, WD, WD45, WF. Can be used to replace OEM number 70227233. (Item #: 105312, Ref: 70208197) $23.00

Miscellaneous

Dipstick - Hydraulic Oil, Used - For Allis Chalmers tractor models CA, D10, D12, WD, WD45, Replaces Allis Chalmers OEM number 70224611, For a new version of this item use Item #: 126536, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440039) $20.01

Oil System

Oil Fill Breather Cap, NO Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Fits over 1-1/2 inch pipe. Replaces OEM numbers 203196, 205298, 200267. (Item #: 110064, Ref: R4459) $21.30

Oil Fill Breather Cap, With Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Replaces OEM numbers 203196, 205298, 200267. (Item #: 107000, Ref: R4458) $42.00

Oil Filter - Oil Filter Cartridge, threaded neck type can. For GAS engines on: B, C, CA, G, IB, RC, WC, WD, WF, WD45, D10, D12, D14, D15, (D17 prior to series IV serial number less than 24000) and others - verify part number. (Item #: 110866, Ref: 70240912) $22.30

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

Paint

No
Picture
Paint, Persian Orange #1, 1 Quart - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108313, Ref: TP282QT) $23.40

No
Picture
Paint, Persian Orange, 1 Gallon - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108314, Ref: TP282GAL) $63.00

No
Picture
Paint, Persian Orange #1, Spray Can - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108312, Ref: TP282SP) $9.00

PTO / Driveline

PTO and Belt Pulley Lever Knob - Plastic Knob, 3/8 inch fine thread. For tractor models WC, WF, WD, WD45. Diameter of knob may vary. (Item #: 126604, Ref: R4572) $6.00

PTO Idler Gear - For Allis Chalmers tractor models WC, WD, Replaces Allis Chalmers OEM number 70203236, (Item #: 120107) $214.00

No
Picture
PTO Idler Gear, Used - For Allis Chalmers tractor models WC, WD, Replaces Allis Chalmers OEM number 70203236, For a new version of this item use Item #: 120107, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435764) $122.01

PTO Shaft - With coupling. 6 spline, 41.00 inches long. Includes coupling 70218386. For tractor models WD, WD45, WD45D. (Item #: 151041, Ref: 70222663) $258.00

PTO Shaft, Used - For Allis Chalmers tractor models WD, WD45, Replaces Allis Chalmers OEM number 70222663, 540 RPM, 6 Spline, 41.00" Long, Includes Coupling 70218386, For a new version of this item use Item #: 151041, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 451041) $132.01

PTO Shifter Seal - For tractor models WD, WD45. (Item #: 172783, Ref: 70224642) $7.90

PTO Stub Shaft - For tractor models WD, WD45. PTO Stub shaft is 6.56 inches long, 6 spline. (Item #: 172785, Ref: 70224528) $161.00

Seats

Pan Seat - This tractor seat is 19 inches wide. Fixed Pan Seat. C, CA, RC, WC, [ WD, WD45 (using 1 bolt Seat Pan) ], WF. Replaces: 200145, 218102, 225050, 70225050. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Item #: 101352, Ref: 8N400) $50.00

Seat Pivot Bolt Bushing - For model WD up to serial number 127006. Two required per tractor, sold individually. (Item #: 162438, Ref: 70225041) $18.00

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Seat Shock with Spring - This Seat Shock with Spring is for a WD up to serial number 127006. It measures 13 inches extended length center to center on the mounts. (Item #: 115710, Ref: 70222450) $110.00

Seat Shock with Spring - This Seat Shock is for tractor models (WD serial number 127007 and up), WD45. This measures 11 3/4 inches extended center to center on the two mounts. (Item #: 105314, Ref: 70226044) $119.00

Sheet Metal / Body Parts

Battery Box - Fits WD and WD 45. Both with DIESEL ENGINES only. Replaces 226951. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126453, Ref: R3535) $115.00

Battery Box - For WD, WD45 Gas Models. Top and one side open. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103872, Ref: 70224540) $70.00

Battery Box - OEM Quality - This battery box is complete and comes with a Persian Orange powder coated finish. It fits the following tractor models: WD and WD45 Gas. The box measures 7 3/16 inches wide, 8 3/4 inches tall, and 9 3/4 inches long. It also replaces part numbers: 224540 and 70224540. This part does come with a "Finish Quality" paint finish. (Item #: 103872, Ref: 70224540-OEM) $70.00

Fender, LH - This Left Hand Fender is for tractor models WD, WD45, WD45D. Left hand side. DOES NOT include bracket. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 105555, Ref: 70224935) $222.00

Fender, RH - This Right Hand Fender is for tractor models WD, WD45, WD45D. Right hand side. DOES NOT include bracket. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 105554, Ref: 70224934) $206.00

Front Weight 2 Piece Anchor Kit - This two piece front weight anchor kit contains a left and right anchor for the weight matching part number: 227272. This kit fits the following tractor models: RC, WC, WD45, and WD. Also replaces part numbers: 227273 and 70227273 (Item #: 125678, Ref: 227273) $45.50

Front Weight Anchor Rod - 7-3/4 inches overall length. HOLDS UP TO 3 FRONT WEIGHTS. For tractor models: RC, WC, WD, WD45 Gas or LP Only, (will not Fit WD45 DIESEL), WF. Replaces: 70227275, 227275227275. (Item #: 126415, Ref: 227275) $14.98

Front Weight Anchor Rod - For tractor models: RC, WC, WD, WD45 gas and LP, WF. 9-1/4 inches overall length, HOLDS UP TO FOUR 22727 FRONT WEIGHTS. Replaces: 70236047, 236047. (Item #: 126413, Ref: 236047) $29.60

Grille Screen - For Allis Chalmers tractor models RC, WC (s/n 74330-later), WD, WD45, WF (s/n 1904-later), Comes primered (color may vary). Prior to painting check fitment, (Item #: 126629) $24.30

Hood - For Allis Chalmers tractor models WC (s/n 74330-later), WD, WF (s/n 1904-later), Replaces Allis Chalmers OEM number 220616, 70220616, 18 Gauge, Thicker Than Original, Primer Color May Vary, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126530) $742.87

No
Picture
Step Kit - This is a 2 piece step kit for models WD and WD45. This will fit the WC model if mounting holes are drilled. Mounting hardware not included. Comes with a Power Coated Orange paint. Both steps mount to the left side frame rail in front of the rear tire. (Item #: 179314, Ref: ACWDSTEPS) $167.87

Toolbox - Fender mount, 15 inch x 5-1/2 inch x 3-3/4 inch. Fits WC, WD, WD45, D10, D12, D14, D15, D17. (Item #: 103875, Ref: 70228924) $57.00

Steering

Seal, Power Steering Pump Driveshaft - For tractor models D10, D12, D14, D15, D17, WD, WD45. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.30

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Used on Allis Chalmers D14, D15, D17, D19, RC when using later style steering joint # 224825, WC when using later style steering joint # 224825, WD, WD45 Diesel, WF when using later style steering joint # 224825. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

Steering Wheel - Steering wheel, 3 spoke. 18 inch diameter, 7/8 inch shaft. Round hub with pinhole. For tractor models WC, WD, WD45, (D14 serial number 19001 and up), (D17 serial number 24001 and up). Replaces: 70229677, 70202260, 229677, 202260. (Item #: 101404, Ref: 70229677) $49.40

Steering Wheel - For WD, WD45, Styled, WC, Early D14, This steering wheel is for tractor models D15, and D17 with 18 inch diameter, 7/8 inch Smooth Hub with pin hole. Replaces OEM numbers V2260 and 202260. (Item #: 101404, Ref: 202260) $49.40

Tie Rod Assembly - Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For (D14, D15, D17, D19, WD, WD45 Fits these models if cut to length), (170, 175, 180, 185, 190XT, 200 fits these models with standard front end). (Item #: 100082, Ref: 70254660) $56.00

Tie Rod End, Female - 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Item #: 100083, Ref: 70254661) $24.90

U-Joint - Steering universal joints assembly kit handles a 1 inch and a 7/8 inch shaft. For RC, WC, WD, WD45. This joint is non repairable and must be replaced when worn out. (Item #: 110269, Ref: 202152) $127.00

U-Joint - Steering universal joints assembly kit. For WD, WD45. This joint is repairable. (Item #: 110269, Ref: 70224825) $127.00

Wheels

No
Picture
10" x 28" 6 Bump, Rear Rim - For Allis Chalmers tractor models RC, WC (s/n 81757-later), WD (early), WF (s/n 1904-later), Replaces Allis Chalmers OEM number 209464, Width: 10", Diameter: 28", Type: Bump, Bumps: 6, Rim Color: Off-White, (Item #: 103776) $420.00

Bearing Cone - Inner cone for front wheel bearings. For tractor models WC, WD, WD45, D10 (serial number 3501 thru serial number 9000), D12 (serial number 3001 thru serial number 9000), D14, D15, D17 (prior to serial number 42000). Replaces 2776. (Item #: 172835, Ref: 70222214) $19.00

Bearing Cup - Outer cup for front wheel bearings. For 170, 180, 190, D14, D15, D17, D19, WC, WD, WD45 (Item #: 180095, Ref: 70209983) $6.00

Eccentric Pin Block, Used - For Allis Chalmers tractor models CA, D10, D12, D14, D15, D17, WD, WD45, 160, 170, 175, 180, 185, 190, 190XT, 6040, 6060, 6070, 6080, 6140, Replaces Allis Chalmers OEM nos 70220032, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430928) $13.26

Eccentric Pin Body, Used - For Allis Chalmers tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 160, 6040, Replaces Allis Chalmers OEM nos 70220756, For rail type power adjust rims, 12 Used with high clearance, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430531) $35.01

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $118.00

Front Wheel - 4-1/4 x 16, five bolt, 3 3/8 pilot hole and 3 inch bolt spacing center-to-center. For WC, WD, WD45, D10, D12, D14, D15, and D17. Not for use with front end loader. Replaces: 232832, 70232832 (Item #: 103755, Ref: R0088) $175.00

Front Wheel Bearing Kit - Front wheel bearing kit. Tractors: D10 (serial number 3501 to serial number 9000), D12 (serial number 3001 to serial number 9000), D10, D12, hi-clearance (prior to serial number 9000), WC, WD, WD45, D14, D15 (prior to serial number 9000), D17 (prior to serial number 42000). This kit is for one wheel only. Kit contains 1 each of the following part number 15288A SEAL, 70209987 CUP, 70222214 CONE, 70209983 CUP and 70209926 CONE. (Item #: 100098, Ref: 70228458) $50.00

Front Wheel Lug Bolt - Used in many applications, this wheel stud has 1/2 inch - 20 NF thread, 1 inch thread length and 13/16 inch hex head. Used on Allis Chalmers 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, B, C, CA, D10, D12, D14, D15, D17, D19, G as rear rim lug bolt, WC, WD, WD45, WF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863. (Item #: 111560, Ref: 512581M1) $1.70

Front Wheel Seal Kit - For one wheel, contains one each of 70202103 retainer, 70202104 felt, and 70202105 metal washer. Tractors: RC, WC, WD, WD45, D10, D12, D14. Supersedes and replaces 228176 (Item #: 179127, Ref: 70208346) $18.40

Hub Cap - THIS CAP IS FOR HUBS WITH OEM number 70228897 ONLY. For tractor models (D10 serial number 3501 and up), (D12 serial number 3001-9000), D14, (D15 serial number up to 9001), (D17 series III serial number up to 42001), WD, WD45. (Item #: 104307, Ref: 70276819) $10.98

No
Picture
Lug Bolt, 9/16" 18 x 1.69", Used - For Allis Chalmers tractor models D10, D12, D14, D15, D17, WD, WD45, 170, 175, 180, 185 (rear), Compatible with Allis Chalmers Construction and industrial models I40, I60, I400, I600 (rear) Replaces Allis Chalmers OEM number 251815, 70251815, 225191, 70225191, , Compatible with Avery tractor models A (rear), BF, BG, R Replaces Avery OEM nos AT400, , Compatible with Case tractor models 200, 200B, 210B, 211B, 300, 300B, 311, 311B, 312, 400B, 410B, 411B, 430, 431, 441, 480 (rear, s/n 8325288), 500B, 510B, 511B, 530 (rear, s/n 8329560), 531 (rear, s/n 8329560), 540 (rear, s/n 8329560), 541 (rear, s/n 8329560), 580 (rear, s/n 8325288), 600B, 610B, 611B, 614B, 630, 640, 641, Compatible with Case Construction and industrial models 420 (rear), 420BD (rear), 430CK (rear), 480CK (rear, s/n 8325288), 530CK (rear, s/n 8329560), 580CK (rear, s/n 8325288) Replaces Case OEM nos 86628557, 030739HT, B18264, , Compatible with CockShutt / CO OP tractor models E3, 20 (rear), 20, 30 (rear), 30, 40 (rear), 40 (Blackhawk), 50 (rear), 50, 540 (rear) Replaces CockShutt / CO OP OEM nos FX07, , Compatible with Ford Construction and industrial models 2030, Compatible with International tractor models A (rear), B (rear, s/n 153375-earlier), B275, B414, Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, Super A, 100, 130, 140 (LH, rear), 240, 300, 330, 340, 350, 354, 364, 384, 404, 424, 444 (rear), 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 3088, 3288 (front), Compatible with John Deere tractor models A (rear), B (rear, s/n 153375-earlier), G (rear, s/n 20277-earlier), H, M, 40 (Blackhawk), 420, 430, 435, 820, 830, 1010, 1020, 1520, 1530, 2010 (rear), 2020, 2030, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030 (front) Replaces John Deere OEM nos AA4173R, AT11920, JD16R, JD21, T21544, T23252, , Compatible with Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 235, 240, 245, 255, 265, 275, 285, 298, 375, 383, 390, 393, 398, 399, 1080, 1085, 1100, 1105, 1130, 1150, 1155, 2640, 2775, 2805, 3060, 3070, 3090, 3140, 3630, 3650 Replaces Massey Ferguson OEM nos 15597A, 518611M91, 519278M91, , Compatible with Massey Harris tractor models Pacer (16), Pony, 20, 22, 30, 33, 44 (Special), 81, 82, 101 (Jr), 102 (Jr), 333, 444 (rear), Compatible with Minneapolis Moline tractor models G1000, G1050, G1350, GB, GTB, Jet Star, Jet Star 2, Jet Star 3, R, U, U302, Z, 335, 445 (rear) Replaces Minneapolis Moline OEM nos 10A7573, , Compatible with Oliver tractor models Super 55, Super 77, Super 88, 60 (American), 66, 70, 77, 88, 550 (rear with stamped steel dish), 660, 770, 880, 1550, 1555, 1600, 1650, 1655 (rear with stamped steel centers), 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2155, 2255 (front), Compatible with White tractor models 2-70, 2-78, 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, Replaces White OEM nos 1H706A, 9/16" X 18 UNF thread, 1-1/8" long thread, 7/8" hex head, 45 degree taper, For a new version of this item use Item #: 108605, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435410) $1.38

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify length before ordering. (Item #: 184824, Ref: 350719KIT) $23.50

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Threaded Hub Cap, Used - For Allis Chalmers tractor models D10, D12, D14, D15 (s/n 9001-earlier), D17, WC (s/n 41388-later), WD, WD45, Replaces Allis Chalmers OEM nos 70206343, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431670) $23.76

Wheel 12X28 - Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body screw are drilled parallel to axle (not at angle). For tractors: WD, WD45, 160 and others using 12 inches x 28 inches 4 rail spin out. Replaces: 226270, 70226270. Additional $25 due to weight. (Item #: 103722, Ref: 1687615M91) $470.00

No
Picture
Wheel Bearing Kit - Front Wheel Bearing Kit with 1.500 inch Inner Bearing I.D. For some WD, D10, D12, D15, Early D17 (Item #: 100098, Ref: R2820) $50.00

Wheel Bolt - This wheel bolt fits the following tractor models: D10, D12, D14, D15, D17, I40, I400, I60, WD, WD45, 170, 175, 180, 185, and I600. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: 225191, 251815, 70225191, and 70251815. (Item #: 108605, Ref: WB916) $2.00

Wheel Hub, 5 Bolt - Hub has overall dimensions of 6 1/4 inch diameter and 5.28 inch depth. For tractor models (D10 serial number 3501 and up), (D12 serial number 3001-9000), D14, (D15 up to serial number 9001), (D17 series III up to serial number 42001), WD, WD45. (Item #: 104303, Ref: 70228897) $70.00

Wheel Hub, Used - For Allis Chalmers tractor models D10 (s/n 3501-later), D12 (s/n 3001-9000), D14, D15 (s/n 9001-earlier), D17 (Series 3, s/n 42001-earlier), WC, WD, WD45, Replaces Allis Chalmers OEM number 70228897, Replaces Casting nos 32904R, Front Wheel Hub 5 Bolt, For a new version of this item use Item #: 104303, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404303) $44.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Item #: 183055, Ref: R4634) $14.00

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Item #: 183122, Ref: R4633) $11.80

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Item #: 183053, Ref: R4632) $9.80

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Item #: 183049, Ref: R5234) $2.60

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Item #: 100153, Ref: R0675) $3.80

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Item #: 100154, Ref: R0676) $9.30

AC Logo Decal - 24 inches long, Black and Orange. (Item #: 183479, Ref: R0677) $27.20

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Item #: 100163, Ref: R5168) $3.80

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Item #: 100152, Ref: R5169) $10.20

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Item #: 183047, Ref: R5233) $23.20

No
Picture
Power Shift Decals - One pair, white. For the cab on some Allis models. (Item #: 183474, Ref: R0674) $27.20

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Item #: 105281, Ref: D4PE12029AA) $14.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

Spark Plug - Fits all models 1953 thru 1975 using 1/2" reach, 7/8" heck size. (Item #: 113918, Ref: AL3116) $4.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

NOTE

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$Allis Chalmers WD Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Allis Chalmers WD Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Allis Chalmers WD Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Allis Chalmers WD Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Allis Chalmers WD Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Allis Chalmers WD Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Allis Chalmers WD Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.75 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.10

$Allis Chalmers WD Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H. Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Orange - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161192) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100109, Ref: TP280QT) $23.30

No
Picture
Paint, Allis Orange, Spray Can - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100108, Ref: TP280SP) $7.90

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Universal - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012) $59.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.20

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00