FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 420 Tractor Parts

[Categories] [All Case Models] [Print]

Clutch

Clutch Disc - For Case tractor models 420, 430, 441, 530 (s/n 8191147 - later), 630 (s/n 8191147 - later), Replaces Case IH OEM number A36147, Clutch Size: 10", Clutch Hub: 1-1/8", Clutch Spline: 17, Clutch Center: Spring, Clutch Type: Woven, For a Remanufactured version of this sku use Item #: 206637, (Item #: 157950) $228.00

Clutch Disc, Remanufactured - For Case tractor models 420, 430, 440, 441, 470, 480, 530, 570, 580, Compatible with Case Construction and industrial models 420, Clutch Size: 11", Clutch Hub: 1-3/8", Clutch Spline: 21, Clutch Center: Springs, Clutch Type: 4 Reg Pads, For a New version of this sku use Item #: 116904, (Item #: 204571) $109.00

Clutch Disc, Remanufactured - For Case tractor models 420, 430, 441, 511B, 530, 611B, 630, Clutch Size: 10", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Pads, (Item #: 206644) $130.01

Clutch Disc, Remanufactured, 110813A1 - For Case tractor models 420, 430, 440, 441, 510B, 511B, 530 (s/n A36036 - later), 611B, 630, Replaces Case OEM number 110813A1, A-110813A1, A-A36036, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 206634) $182.01

Clutch Disc, Remanufactured, 1997843C1R - For Case tractor models 420, 430, 440, 441, 470, 480, 530, 570, 580, Replaces Case OEM number 1997843C1R, A-A39087, Clutch Size: 11", Clutch Hub: 1-3/8", Clutch Spline: 21, Clutch Center: Springs, Clutch Type: Woven, (Item #: 206641) $117.00

Clutch Disc, Remanufactured, 259AA - For Case tractor models 200B, 300, 420, 430, 441, 530 (s/n 8191147 - later), Replaces Case OEM number 259AA, Clutch Size: 9-1/4", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 5 or 6 Reg Pads, (Item #: 206623) $125.50

Clutch Disc, Remanufactured, A36142 - For Case tractor models 420, 430, 440, 441, 510B, 530 (s/n 8297800 - earlier), 630, Replaces Case OEM number A36142, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 17, Clutch Center: Springs, Clutch Type: 6 Reg Pads, (Item #: 206639) $179.00

Clutch Disc, Remanufactured, A36414 - For Case tractor models 420, 430, 440, 441, 510B, 530 (s/n 8297800 - earlier), 630, Replaces Case OEM number A36414, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 17, Clutch Center: Spring, Clutch Type: Woven, (Item #: 203611) $121.01

Clutch Disc, Remanufactured, A51840 - For Case tractor models 420, 430 (s/n 8297801-8656925), 440, 441, 470, 480, 530, 570, 580, Compatible with Case Construction and industrial models 420, 480, 580, Replaces Case OEM number A51840, Clutch Size: 11", Clutch Hub: 1-3/8", Clutch Splines: 21, Clutch Center: Spring, Clutch Type: 6 Regular Pads, (Item #: 203210) $167.50

Clutch Disc, Remanufactured, AC36145 - For Case tractor models 300, 420, 430, 441, 511B, 530 (s/n 8191147 - earlier), 611B, 630 (s/n 8191147 - earlier), Replaces Case OEM number AC36145, AR36145, Clutch Size: 10", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206626) $134.00

Clutch Release Throw Out Bearing - For Case tractor models 300, 420, 430, 440, 441, 510B, 511B, 530, 611B, 630, 640, Compatible with Case Construction and industrial models 320, Replaces Case OEM number A49009, G10610, I.D.: 2.00", O.D.: 3.695", Thickness: .815", (Item #: 111793) $37.80

Pressure Plate Assembly - Used on Case models 420 (s/n 8297801-8656925), 430 (s/n 8297801-8656925), 440, 441 (s/n 8297801-8656925), 470, 480, 530, 570, 580, 640, 580D, this is an 11 inch pressure place with 3 levers. It has 6 springs, a 1-7/8 inch 29 spline center and a flat flywheel step. Replaces Case part numbers A39212, A37566 (Item #: 122018) $287.00

Pressure Plate Assembly, Remanufactured - For Case tractor models 300, 420, 430, 441, 511B, 530, 611B, 630, Pressure Plate Size: 10", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, (Item #: 206797) $89.01

Pressure Plate Assembly, Remanufactured, A36567 - For Case tractor models 420, 430, 441, 511B, 530, 611B, 630, Replaces Case OEM number A36567, Pressure Plate Size: 10", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Hub: 1-1/2", Pressure Plate Spline: 24, Pressure Plate Type: Single Stage, (Item #: 206801) $125.50

Pressure Plate Assembly, Remanufactured, Gleaner, 71131328 - For Case tractor models 200B, 300, 420, 430, 441, 530, Compatible with Case Combine (s) 600, 660, Compatible with Gleaner Combine (s) E, Replaces OEM number 71131328, A-71131328, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Type: Single Stage, (Item #: 206796) $107.00

Cooling System

No
Picture
Radiator - Copper and Brass Radiator, core measures 21.5 inches tall, 20.75 inches wide and 2.5 inches thick. 3 rows of tubes. For tractor models: 410, 420, 420CT, 430, 435, 440, 440CT, 445, 445CT, 450, 450CT, 465. Replaces OEM numbers 87013856, 87015523. FOR PLASTIC TANK version see part number 87015523. (Item #: 123475, Ref: 87013856) $340.00

No
Picture
Radiator - PTR - Plastic Tank Radiator - For tractor models: 410, 420, 420CT, 430, 435, 440, 440CT, 445, 445CT, 450, 450CT, 465. Replaces OEM numbers 87013856, 87015523. FOR Copper and Brass version see part number 87013856. (Item #: 87015523) $449.29

Thermostat, 160 Degrees - This is a 160-degree thermostat. Used on Case models Super 400, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 425, 700, 701, 701B, 702, 702B, 703, 703B, 705, 705B, 710, 710B, 711, 711B, 712, 712B, 713, 713B, 715, 715B, 725B, 730, 730 Comfort King, 730 Draft-O-Matic, 730CK, 731, 732, 733, 734, 740, 741, 742, 743, 744, 800, 800B, 801, 801B, 802, 802B, 803, 803B, 805B, 810, 810B, 811, 811B, 812, 812B, 813, 813B, 815, 815B, 830, 830 Comfort King, 830 Draft-O-Matic, 831, 832, 833, 840, 841, 842, 843, 900, 900B, 910, 910B, 920B. Replaces 1002521M91, 185201M2, 226372, 228543, 70226372, 70228543, 830873M93, A11493, A28114, TG10608 (Item #: 150677, Ref: 226372) $23.40

No
Picture
Water Pump - This water pump assembly with gasket and 2.75" impeller is completely new, from the seal to the housing. Casting# VT341, VT327, A28860. NOTE: replaces A148401-R, A48362, A48364, G11956, G11956-R. For tractor models W3 (GAS), 310C (GAS), 310D (GAS), 310E (GAS), 310F (GAS), 310G (GAS), 320 (GAS), 420B (GAS), 420BD, 420C (GAS), 425 (GAS), 430CK (GAS), 480B, 480C, 480CK, 530CK (GAS), 580B (GAS), 580CK (GAS), 420 (GAS), VA (Series, GAS) (Item #: 104193, Ref: G11956-R) $70.00

Water Pump - For VA, VAC, VAE, VAH, VAI, VAO, VAS, W3, 310, 310C, 310D, 310E, 310F, 310G, 411, 413, 420, 420B, 420C, 425, 430, 441, 500B, 530, 600B, 630, all with gas engines. Water Pump without pulley. Replacement for casting #VT341, VT327, A28860. (Item #: 104193, Ref: G11956) $70.00

Water Pump - Less Pulley. Has 2-3/4" impeller diameter. For tractor models 200 gas, 200B 1959 and later, 300, 300B gas 1959 and later, 310, 311, 320, 320B, 400B 1959 and later, 420 gas, 420B, 420BD, 420C gas, 430, 431, 480B, 480C, 480CK, 500B 1959 and later, 530, 540, 580B gas, 580CK gas, 600, 600B, 660, VA 1948 and later, VAC 1948 and later. Replaces VT341, VT327, A28860, G11956. (Item #: 104193, Ref: A148401) $70.00

Decals and Emblems

Sunburst Eagle Emblem - This Sunburst - Eagle Emblem has a 4-3/8" Outside Diameter. It is Injection-molded Plastic. Fits: (300, 301, 302, 310, 311, 312, 320, 350, 351, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 425 all 1956 through 1958), (600, 610, 620 all 1956), SUPER 400 (1956 THRU 1958). Replaces: A7600 (Item #: 110343, Ref: A7600) $100.00

Drive Train

Gear Shift Knob - Plastic knob, 3/8 inch fine thread. For tractor models VAC, D, DC, S, SC, 200B, 300B, 320B, 400B, 420B, 420, 500B, 600B, 600, 700, 800, 900. (Item #: 109545, Ref: 03501AB) $4.00

Electrical System

Electronic Ignition Conversion Kit, 12 volt negative ground - For 200B, 400B, 500B, 600B with G-126, G-148, G164; 300B, 310, 420, with G-148. electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. For Delco distributors with clip held cap. (Item #: 105071, Ref: 1142) $155.00

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For DELCO distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For: 200B, 210, 211, 211B, 300, 310, 300B, 320, 350, 351, 400, 400B, 420, 430, 440, 441, 450, 500, 500B, 580CK, 600, 600B, 640, 640C, 641, 641C, D, DC, DC3, DC4, DO, S, SC, SI, SO, 200, 200B, 210B, 211B. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. (Item #: 103151, Ref: ATK1DCR) $9.50

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a Universal part. Applications include ether switch, horn button, cold start, starter switch and manifold heater switch. Replaces: 09995AB, 86900358, A30858. (Item #: 121141, Ref: R7994) $12.00

Engine Bearings

Bearing - For Case Construction and industrial models 300, 310 (s/n 3008188-early), 310C (s/n 3008188-3010989), 320 (s/n 300001-3008132), 400, 420 (s/n 3008188-3012300), 500, Replaces Case OEM number 02135, (Item #: 156437) $128.00

No
Picture
Main Bearing Set, .010 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106093, Ref: MB364-10) $117.00

No
Picture
Main Bearing Set, .020 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: MBK364-20) $98.74

No
Picture
Main Bearing Set, Std - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106092, Ref: MBK364) $112.00

No
Picture
Rod Bearing, .010 - Used in 148 CID gas engine 1961-1970 with rod forging # G-11176. For tractor models 300, 300B, 310B, 311B, 320B, 330, 400B, 420, 425, 430, 431, 440, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530. (Item #: 106082, Ref: A36502) $13.30

Rod Bearing, .020 - Used in 148 CID gas engine 1961-1970 with rod forging # G-11176. For tractor models 300, 300B, 310B, 311B, 320B, 330, 400B, 420, 425, 430, 431, 440, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530. (Item #: 106083, Ref: A36503) $6.90

No
Picture
Rod Bearing, .030 - Used in 148 CID gas engine 1961-1970 with rod forging # G-11176. For tractor models 300, 300B, 310B, 311B, 320B, 330, 400B, 420, 425, 430, 431, 440, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530. (Item #: 106084, Ref: A36504) $9.10

No
Picture
Rod Bearing, Std - Used in 148 CID gas engine 1961-1970 with rod forging # G-11176. For tractor models 300, 300B, 310B, 311B, 320B, 330, 400B, 420, 425, 430, 431, 440, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530. (Item #: 106080, Ref: A36500) $10.40

Thrust Washer, Front - Used on Continental engines F140, G148, F162, F163, D202, DS202, PD202, DS6202, 124, VA124, VAE, G126, Z120, F124. This thrust washer replaces OEM numbers 15285A (Ferguson, Massey Harris), A30472 (Case), VT3376 (Case). Measures 2-9/32 inches inside diameter, 3-1/16 inches outside diameter, 3/32 inches thick. Measure before ordering. Some of the listed engines used more than one size. (Item #: 189167) $42.40

Engine Gaskets

Front Crankshaft Seal - This front crankshaft oil seal has a 2.625 inch Inside Diameter, a 3.628 inch Outside Diameter and is .433 inch wide. Replaces: A157044, A23433, A24715, A27838, A40349, A57342, A62049, O3866AB, O8583AB, O9708AB, T34263 (Item #: 106145, Ref: A57342) $9.60

No
Picture
Full Gasket Set - For tractor models 200B, 210B, 211B, 300, 300B, 310, 320, 400B, 420 with 148 Gas Engine. (Item #: 106072, Ref: FS3122) $124.00

Head Gasket - This Gasket Set is used on the following; Case 600 Tractor with 377 engine, Case 900 Tractor Thru serial number 8108407 with 4.873 inch Liner Flange OD with 377 engine, Case 900 Tractor serial number 8107438-8108407 with 4.997 inch Liner Flange OD with 377 engine, Case 900 Tractor After # 8108407 with 377 engine, Case 800 Combine with 719BF Engine with 251 engine, Case 400 Non-Super Tractor with 251 engine, Case 420 Wheel Tractor with 251 engine, Case 425 Wheel Tractor with 251 engine, Case 800 Combine with 251 engine, Case 700 Tractor with 251 engine, Case W9 Wheel Loader Thru serial number 8150185 with 251 engine. Replaces A9235, A24462 (Item #: 172958, Ref: A9235) $141.04

Head Gasket Set - For Case tractor models 400, 420, 700, 800, Compatible with Case Construction and industrial models W9, Compatible with Case Engine (s) G251, Replaces Case OEM number A189507, (Item #: 106153) $682.00

Oil Pan Gasket - For Case tractor models 400, 420, 700, 730 (s/n 8253500-earlier), 740 (s/n 8253500-later), 800, 830 (s/n 8253500-later), 840 (s/n 8253500-earlier), Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W9 (s/n 8150185-earlier), W9A, 425, 680B (s/n 9103966-earlier), 680CK, 750 (s/n 7070350-later), 850 (s/n 7073468-earlier), Compatible with Case Engine (s) D267, D301, G251, G284, Replaces Case OEM number A7616, Oil Pan Gasket Only, (Item #: 106167) $22.10

Overhaul Gasket Set - This Complete Engine Gasket Set With Crankshaft Seals fits tractors with 207 cubic inch engines and 188 Diesel engine above Engine Serial number 2656844. Replaces: A143000, A189537, A40712, A41426, A42001, A43198, A44758, A51891, G11950. (Item #: 106103, Ref: CKS1947) $192.00

Upper Gasket Set - For 207 Diesel engine in Models: 310, 310B, 320B, 330, 350, 420, 425, 430, 431, 441, 450, 450B, 470, 480, 480B, 480CKB, 480CKC, 480D, 480LL, 500, 500LK, 530, 530C, 531, 540C, 541, 541C, 570, 580, 580B, 580CK, 580CKB, 580D, 584, 600, 630, 640, 680CK, LCK430, LCK530, 540, 440, 610, 540. Upper Gasket Set includes Head Gasket. (Item #: 106108, Ref: A41425) $79.00

Engine Rebuild Kits

No
Picture
In-Frame Overhaul Kit - For 4-cyl 188 DIESEL engine. Standard bore of: 3.812", and uses 1.249" DIA piston pins. Fits 310B, 311B, 320B, 330, 420, 425, 430, 431, 441, 470, 480, 480CK, 480D, 480LL, 530, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK. Set includes: Pistons, piston pins and retainers, rings, liners, upper and lower engine gasket sets with seals. NOTE this kit contains 4.537 flange sleeve. (Item #: 172803, Ref: IK104) $348.00

Engine Parts

Camshaft - Camshaft. Use with 38931 cam gear. For 188 and 207 Diesel engines. Fits 430, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D. Replaces original part numbers: A153521, A2111, A36853, A39013 (Item #: 111338, Ref: DA153521) $187.00

Crankshaft, 148 Gas - Standard journal size is 2.25". For tractor models 200B, 300, 300B, 310, (310C SN# 3008188-3010989), 320, 320B, 400B, (420 SN# 3008188-3023300), 420B, 420DB all with 148 CID gas engines up to 1960, with casting numbers G11700, G11701, G10071. Does NOT come with bearings. (Item #: 100340, Ref: G11164) $334.00

Exhaust Valve - For Case tractor models 400, 420, 600, 700, 730, 740, 800, 900, 930, 940, Compatible with Case Combine (s) 800, Compatible with Case Construction and industrial models W8B, W8C, W9, W9B, W9C, W10B, W10C, 425, 680CK, Replaces Case OEM number A33423, A33456, A21711, 1.545" Head Diameter, Length: 6.540", (Item #: 128712) $154.00

No
Picture
Final Drive Shaft - For Case Construction and industrial models 300, 310, 320, 350, 400, 420, 420B, 500, Replaces Case OEM number 11832, (Item #: 111790) $121.00

Piston Pin Bushing - For Case tractor models 400, 420, 500, 600, 700, 730, 740, 770, 800, 830, 840, 870, 900, 920, 930, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W7E, W8B, W8C, W8E, W9, W9A, W9B, W9C, W9E, W10, W10B, W10C, W10E, 680CK, Compatible with Case Engine (s) D267, D401, G251, G284, G301, G377, Replaces Case OEM number A27846, 1.358" pin, (Item #: 108142) $41.20

Valve Overhaul Kit, G188D Diesel - For 188 DIESEL engine, complete for 1 engine, contains: (4) V1518 Intake valves, (4) V1517 exhaust valves, (8) VT3372 valve springs, (4) VG843 valve guides, (4) VG844 Valve guides, (16) VK115R Valve keys. Fits 310B, 311B, 320B, 330, 420, 430, 431, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530, 540, 440, 610, 540. (Item #: 120238, Ref: VOKC188) $191.00

Valve Rotator - For Case tractor models 420, 600, 700, 730, 740, 770, 800, 830, 840, 870, 900, 930, 970, 1030, 1070, 1090, 1170, 1175, 1200, 1270, 1370, 1470, 1570, 2090, 2094, 2290, 2294, 2390, 2394, 2470, 2590, 2670, 3294, 4490, 4494, 4690, 4694, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W7E, W8B, W8C, W8E, W9, W9A, W9B, W9C, W9E, W10, W10B, W10C, W10E, W12, W14, W14FL, W14H, W18, W18B, W20, W20B, W20C, W24, W24B, W24C, W26B, W30, W36, 35B, 40D, 40E, 50E, 300C, 400C, 600, 680B, 680C, 680CK, 680E, 680G, 680H, 750, 780B, 780CK, 850, 850B, 850C, 855C, 880, 880B, 880C, 980, 980B, 1080, 1080B, 1150, 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1450, 1450B, 1455B, Compatible with Case Engine (s) 301BD, 336BD, 336BDT, 451BDT, 504BD, 504BDT Replaces Case OEM number A23061, A66336, A44658, A24993, O10735AB, O21687, , Compatible with Case IH tractor models 2594, (Item #: 168538) $21.00

Engine Rings

No
Picture
Piston Rings - 3-3/8" bore, 12 compression rings 1/8", 4 oil rings 1/4". For tractor models 420, 430, 440, 470, 480 all with gas engines. (Item #: 1488279) $120.87

No
Picture
Piston Ring Set - 3-3/8" bore, 12 compression rings at 3/32", 4 oil rings at 1/4". For tractor models 1737, 300, 300B, 310, 310C, 310D, 310E, 310F, 310G, 320, 320B, 500D, 556D, 400B, 400D, 420, 420B, 420BD, 420C, 430, 440, 441, 456D, 470, 480, 480B, 480CK. All using on of the following gas or LPG engines G148, VA148, LCK, G148B. (Item #: 129078, Ref: 2C7558) $37.50

No
Picture
Piston Ring Set, 4 Inch Bore - 12 compression rings 3/32 inch, 4 oil rings 1/4 inch. For tractor models C, CC, CI, CO, D, DC, DI, DO, 400, 420, 680CK, 700, 730, 740, 770, 800, 810. Not for use with chrome sleeve liners. (Item #: 130066, Ref: 1486638) $139.00

No
Picture
Piston Ring Set, For a Single Piston - 3-3/8 inch bore, 3 compression rings 3/32 inch, 1 oil ring 1/4 inch. For tractor models 300, 300B, 400B diesel or gas and 420, 430, 440, 470, 480 gas. NOT for use with chrome sleeve liners. (Item #: 129078, Ref: 1486646) $37.50

Ring Set, For Single Cylinder - For 188 CID 4 cylinder diesel standard bore 3-13/16 inch, sleeve flange 4.537 inch O.D., contains: (1) 1/8 inch, (1) 3/32 inch, and (1) 3/16 inch ring per cylinder. (Item #: 120711, Ref: PRSC1882) $45.60

Exhaust System

Exhaust Manifold - For G126, G148, G159 and G164 cubic inch gas engines on: 310D Crawler, 310F Crawler, 310G Crawler, 420B Crawler, 420C Crawler, 430 Tractor, 430CK Wheel Tractor, 440 Tractor, 441 Tractor, 445 Tractor, 470 Tractor, 480CK Wheel Tractor, 480B Wheel Tractor, 1737 Skid Loader, 1737S Skid Loader, 1835 Skid Loader, 1835B Skid Loader, M570AT Tug, W3 Wheel Loader, 530 Tractor, 530CK Wheel Tractor, 540 Tractor, 541 Tractor, 545 Tractor, 570 Tractor, 580CK Wheel Tractor, 580B Wheel Tractor, 1150 Windrower, 1845 Skid Loader, 1845B Skid Loader, 1845S Skid Loader and others. These manifold measures 15-5/8 inches on the outside bolt holes. Replaces: G1064, G2009 (Item #: 126359, Ref: G2009) $236.00

Exhaust Manifold Gasket - This Exhaust Manifold Gasket measures 2.506 inches outside diameter, 1.786 inches inside diameter and is 0.085 inches thick. It fits: (L, LA, LAH, LAI, LAIH, LAIM, LI all gas, distillate, 2 used for INTAKE only), (Super 400, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 425 all gas, LP, diesel, 4 used), (500, 520 both diesel, 6 used), (610, 620 both LP, diesel; 6 used), (700, 710, 710B, 711, 712, 712B, 713, 713B, 715, 715B, 725B, 730, 740, 741, 742, 743, 744, 810, 810B, 811, 811B, 812, 812B, 813, 813B, 815 gas, 4 used), (900, 900B, 910, 910B, 920B gas, LP, diesel; 6 used), (930 Early 1960 - 64, gas with center exhaust, 6 used), (940, 941 1960 - 64, gas with center exhaust, 6 used)], (711B gas, 4 used), (420 gas, LP, diesel. 4 used), (600 LP, diesel; 6 used), (800 gas, 4 used), 680CK, (W9 gas, 4 used). Replaces: 1349071C1, A27909, O1437AB, O9815AB (Item #: 180167, Ref: A27909) $6.30

Fuel System / Air Intake

Air Cleaner Cap - Fits Avery A, Case VA, VAC, VAI, VAO and VAH, INDUSTRIALS - 310, 310C, 310D, 310E, 310F, 320, 400B, 420, 420B, 420C and 500B, Replaces # A30532, VT3812, 135342. 1-13/16 inch inlet ID. (Item #: 126366, Ref: R4801) $56.00

Fuel Cap - For Case tractor models C, L, R, S, 400, 410, 411, 412, 420, Replaces Case OEM number A31101, 01036AB, 010909A, A26400, (Item #: 126518) $24.70

Fuel Filter - The fuel filter measures 3 7/16 inches diameter, 2 3/4 inches tall. Comes with two large and one small rubber seal rings. Replaces A51346, A37187, A39109, G45288, 45288, 3602788R91, 309991, C3TZ9365B, 86546599, 309531, C3TA9176A, C3TZ9155B, C3TA9155B, 1021350M91, 1021351M1, 835944M91, 1596257M91, 1021351M3, A35668, 70000-14632, 7000014632 (Item #: 159728, Ref: 309991) $24.50

Gauges

Ammeter - This Ammeter with a Case logo has a 2 inch diameter and fits C, CC, CC-3, CC-4, CCS, CH, CI, CO, D, DC, DC-3, DC-4, DCS, DEX, DH, DI, DO, DV, L, LA, LAI, LAIH, LAIM, R, RC, S, SC, SC-3, SC-4, SI, SO, Super 400, V, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAE, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, VC, VI, VO, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 420C (Crawler), 425, 500, 520, 600, 610, 620. Replaces: O3601AB. (Item #: 121648, Ref: O3601AB) $29.00

Hitch / Drawbar

Eagle Hitch, Latch - Category I. For tractor models 200B, 300, 300B, 400B, 500B, 600B, 700, 800, 310, 310C, 320, 320B, 420, 420B, 420BD, 420 (DOZERS, 425, 430, 630, 730, 830). Replaces 6167A. (Item #: 126347, Ref: A26240) $49.20

Eagle Hitch Lock, LH - Category I. For tractor models 200B, 300, 300B, 400B, 500B, 600B, 700, 800, 310, 310C, 320, 320B, 420, 420B, 420BD, 420 (DOZERS, 425, 430, 630, 730, 830). Replaces 6169A. (Item #: 126348, Ref: A26242) $34.50

Eagle Hitch Lock, RH - Category I. For tractor models 200B, 300, 300B, 400B, 500B, 600B, 700, 800, 310, 310C, 320, 320B, 420, 420B, 420BD, 420 (DOZERS, 425, 430, 630, 730, 830). Replaces 6168A. (Item #: 126349, Ref: A26241) $38.42

Hydraulic System

Hydraulic Seal Kit - Boom Bucket Cylinder - For Case Construction and industrial models W3, W7, W9, 310, 350, 420, 430, 450, 480, 530, 580, 680, 750K, 1150, Replaces Case OEM number D42873, Rod: 1-3/4", Bore: 1-3/4", (Item #: 152865) $22.10

Lights

Headlight - Zinc plated. For D, DS, S, SC, LA, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 425, 500, 520, 600. Headlight. 12 volt. 5 3/4 inch diameter. Replaces: Serviceable : O9668AB, O6330AB. (Item #: 105352, Ref: 06330AB-12V) $86.00

Miscellaneous

Lever - For Case tractor models 200B, 210B, 211B, 300, 311, 312, 350, 400, 410, 410B, 411, 420, 430 (gas / diesel), 440 (gas / diesel), 441 (gas / diesel), 470 (gas / diesel s/n 8262801-later), 500, 510B, 511B, 600, 610B, 611B, Compatible with Case Construction and industrial models 210B, 300, 310, 320, 350, 400, 420, 420B, 430 (gas / diesel), 500, 600, Replaces Case OEM number B318-82, G1085, Lever includes roll pin., (Item #: 127410) $53.58

Oil System

Oil Filler Cap - For tractor models VAC, 200, 300, 310, 320B, 420, 430, 500B, 530, 600B. Replaces A36608. (Item #: 110064, Ref: VT3545) $21.30

Oil Filter - For tractor models VA, VAC, VAI, VAO, VAS, 200, 300, 301, 310, 311, 350D, 400, 500, 600 series with case engine, and other models, verify OEM Part Number. Replaces VT3589, and A36136. (Item #: 110866, Ref: 70240912) $22.30

No
Picture
Oil Filter, Cartridge Type with Gasket - For tractor models 300, 320, 400, 420 diesel. (Item #: G45008) $17.64

PTO / Driveline

PTO Shaft Oil Seal - This seal fits the following tractor models as a PTO shaft oil seal: 310, 310C, 310D, 310E, 310F, 320, 420, 420B, 420C, and 310G. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. Replaces part number: 23033. (Item #: 109957, Ref: 8N7052A) $8.00

Seats

Seat Spring, Rubber - With rivets, must reuse old side plates. For tractor models 400, 420, 600, 700, 800, (730, 830 up to SN# 8253500). (Item #: 123680, Ref: A7053) $118.00

Sheet Metal / Body Parts

$Case 420 Cage Nut - 1\4 inch - 20 NC$
Cage Nut - 1/4" - 20 NC - For Case tractor models 200B, 210B, 211B, 300, 311, 312, 350, 400, 410, 410B, 411, 412, 420, 430, 440, 441, 470, 500, 510B, 511B, 530, 531, 540, 541, 570, 600, 610B, 611B, 630, 640, 641, 700, 702, 800, 801B, 900, 920, 930, 940, Replaces Case OEM number 131-98, 131-102, 131-115, G48002, Zinc finish, 1/4" - 20 NC, (Item #: 150680) $2.50

Toolbox - Says "CASE". For tractor models D, DC, DO, DV, S, SC, SO, Late LA, 400, 500. (Item #: 152185, Ref: 2884AA) $46.30

Steering

Steering Pin - For Case tractor models 200B, 300, 300B, 311, 311B, 312, 312B, 350, 351, 400, 400B, 411, 411B, 420, 430, 500, 500B, 510B, 511B, 530, 600, 600B, 610B, 611B, 614B, 630, 640, 641, Replaces Case OEM number A40907, Length 1.437", Diameter Taper 0.375"-0.550", Diameter where presses into sector 0.499", Flanged base diameter 0.721", (Item #: 126709) $37.80

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.50

Wheels

Wheel Bolt - This wheel bolt fits the following tractor models: 200, 200B, 210B, 211B, 300, 300B, 301, 301B, 302, 302B, 310, 310B, 311, 311B, 312, 320, 320B, 400B, 410B, 411B, 420, 420B, 430, 430CK, 431, 435, 440, 441, 445, 470, 480, 480B, 480CK, 500B, 510B, 511B, 530, 530CK, 531, 535, 540, 541, 545, 570, 580, 580B, 580CK, 600B, 610B, 611B, 614B, 630, 631, 632, 634, 640, 641, 642, 644, and W3. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number O30739HT. (Item #: 108605, Ref: WB916) $2.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal - Case Eagle Decal, 2 inch. (Item #: 100513, Ref: R5170) $2.80

Decal - Case Eagle Decal, 1-1/4 inch printed on vinyl. (Item #: 183056, Ref: R5235) $2.60

Decal - Case Eagle Decal, 4 inch. (Item #: 100524, Ref: R1299) $5.60

Decal - Case Eagle Decal, 6 inch. (Item #: 100525, Ref: R1300) $7.50

Decal - Case Eagle Decal, 9 1/2 inch. (Item #: 100526, Ref: R1303) $9.30

Draft-O-Matic Decals - Draft-O-Matic Decals, Round (Set of 2) - Vinyl Cut. Decal is used in association with any other listed decal set if you have a DRAFT-O-MATIC. (Item #: 100517, Ref: R2247) $27.90

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

No
Picture
Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$Case 420 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Case 420 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Case 420 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Case 420 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Case 420 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Case 420 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Case 420 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - Rain Caps are located in the EXHAUST category of the Accessories and Universal parts section.

NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Elbow and Strainer - Fits some Case models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Case 420 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Eagle Hitch Leveling Knob, Rubber - For all models using Eagle Hitch. Replaces O4995AB. (Item #: 126108, Ref: A26845) $17.90

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Case Yellow, Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154618, Ref: TP160GAL) $108.00

No
Picture
Paint, Case Yellow, Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154616, Ref: TP160QT) $41.70

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Desert Sand, 1 Gallon - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108139, Ref: TP130GAL) $123.00

No
Picture
Paint, Desert Sand, 1 Quart - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108138, Ref: TP130QT) $40.00

No
Picture
Paint, Desert Sand, Spray Can - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. Ensure you have correct color. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108137, Ref: TP130SP) $11.50

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Power White, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100348, Ref: TP271GAL) $60.00

No
Picture
Paint, Power White, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100347, Ref: TP271QT) $23.30

No
Picture
Paint, Power White, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100346, Ref: TP271SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00