FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 480B Tractor Parts

[Categories] [All Case Models] [Print]

Brakes

Brake Actuating Drum Ball - For Case Construction and industrial models W5, W5A, 430, 480, 480B, 480C, 480CK, 480D, 480LL, 530CK, 580, 580B, 580C, 580D, 580SD, 584, 584C, 584D, 585, 585C, 585D, 586, 586C, 586D, Replaces Case OEM number 211-214, Diameter: 1/2", (Item #: 152216) $8.00

Brake Band - Brake Band for tractor models 430, 431, 435, 441, 445, 480, 530, 531, 535, 540, 541, 545, 470, 570, 630, 631, 632, 634, 640, 641, 642, 644, W3, 430CK, 530CK, W5, 480B, 480C, 480CK, 480D, 580B, 580C, 580CK, 580D, 580, 584, 584D, 585D, 586D, 586, 586C. 4 required per tractor. Replaces Case part number 1995397C1, 249018A2, 249018A3, A41728, A44719, A44721, A44756, A47683, A47716, G45468 . Also replaces 70276940, 70235610, 70277438. (Item #: 105398, Ref: 70277379) $31.00

Brake Band - For Case Construction and industrial models 430, 480B, 480C, 530, 530CK, 580, 580B, 580C, 584C, 585C, 586C, Replaces Case OEM number 249018A3, 135574A1, A44716, A44756, Sold each, (Item #: 152159) $42.90

Brake Disc - Bonded - For Case Construction and industrial models 480, 480B, 480C, 480D (s/n 16270319 - later), 480E, 480ELL, 480F, 480FLL, 480LL (s/n 16270319 - later), 580, 580B, 580C, 580D, 580E, 580K, 580L, 580M, 580SD, 580SE, 580SK, 580 Super L, 580 Super M, 584D, 584E, 585D, 585E, 586D, 586E, Replaces Case OEM number 1349141C3, 1349141C1, A153982, 1349141C2, 84415744, 19 Tooth, 8.0" O.D., Major: 2.512" Minor: 2.269" I.D., .439" Thick, (Item #: 152136) $61.00

Brake Slave Cylinder - For Case Construction and industrial models 450, 450B, 450C, 480, 480B, 480C, 480D, 580, 580B, 580C, 580D (less turbo), 850B, 850C, 850D, 855C, 855D Replaces Case OEM number G109413, A51976, , Compatible with Case IH tractor models 4494, 4694, 4894, Rod Length: 2-3/4", Mounting Holes: 1-3/4" Center to Center, Mounting Holes Diameter: 1/4", (Item #: 127445) $36.00

No
Picture
Brake Spring - Band Return, Set of 4 - For Case Construction and industrial models W5A, 430CK, 480B, 480C, 480CK, 480D, 480LL, 500, 530CK, 580, 580B, 580C, 580D, 580SD, 584C, 584D, 585C, 585D, 586C, 586D, Replaces Case OEM number A157705, G48507, (Item #: 171579) $14.40

Clutch

Clutch Release Bearing - This Release Bearing measures: inside diameter 2.250 inch outside diameter 3.803 inch width .8085 inch. Replaces 48974D, 649106R91, N1171, A7538, 10A21384GV, 120795R91, 48974DGV, 618237R91, A2526-31, A7538GV, TPAT17464GV, TP-AT17464GV, 104810A, 72160065, AT17464. (Item #: 100013, Ref: 10A21384) $30.00

Cooling System

Fan, 6 Blade - 17.750" diameter, 1.250" pilot hole, 2.187" center to center on bolt holes. For tractor models (480B, 480CK, 570, 580CK diesel), (530 diesel engine SN# up to 2627377 and gas engine SN# up to 8262800). (Item #: 163836, Ref: A173962) $141.00

$Case 480B Radiator, w\o Oil Cooler$
Radiator, w/o Oil Cooler - This Radiator if for 480B, 580B, 580 Constuction King (SN# up to 8685801), 430CK, 480CK, 530CK, 580CK B Series (with mechanical shuttle). To help identify, the top hose connection is a 90 degree pipe turning straight down. (Item #: 101672, Ref: A39344) $285.00

No
Picture
Water Pump - This water pump assembly with gasket and 2.75" impeller is completely new, from the seal to the housing. Casting# VT341, VT327, A28860. NOTE: replaces A148401-R, A48362, A48364, G11956, G11956-R. For tractor models W3 (GAS), 310C (GAS), 310D (GAS), 310E (GAS), 310F (GAS), 310G (GAS), 320 (GAS), 420B (GAS), 420BD, 420C (GAS), 425 (GAS), 430CK (GAS), 480B, 480C, 480CK, 530CK (GAS), 580B (GAS), 580CK (GAS), 420 (GAS), VA (Series, GAS) (Item #: 104193, Ref: G11956-R) $70.00

Water Pump - Less Pulley. Has 2-3/4" impeller diameter. For tractor models 200 gas, 200B 1959 and later, 300, 300B gas 1959 and later, 310, 311, 320, 320B, 400B 1959 and later, 420 gas, 420B, 420BD, 420C gas, 430, 431, 480B, 480C, 480CK, 500B 1959 and later, 530, 540, 580B gas, 580CK gas, 600, 600B, 660, VA 1948 and later, VAC 1948 and later. Replaces VT341, VT327, A28860, G11956. (Item #: 104193, Ref: A148401) $70.00

Drive Train

Gear Shift Boot - Rubber Gear Shift Boot fits Case 200B, 300B, 400B, 500B, 600B, 430, 530, 630, 730, 830, 930, 1030, 470, 570, 480, 480B, 580 and 580B, Replaces A26956, A57876, O4867AB, O5920AB. (1-3/4 inches bottom I.D., 9/16 inch hole diameter) (Item #: 126658, Ref: R4803) $10.50

Gear Shift Knob - Plastic Knob, 3/8 inch Fine thread. For tractor models 430, 530, 470, 570, 480, 480B, 580B, 580, 780, 680B, W7, W5A, W9A, W10, W12, W24, W24B. (Item #: 126604, Ref: R4572) $6.00

Manual Shuttle Gear - This Manual Shuttle Gear has 27 Teeth. It is used on Case 430, 470, 530, 570, 580CK, 480B, 580B. Replaces G16624, A144361 (Item #: 179342, Ref: G16624) $204.00

Manual Shuttle Input Gear - This Manual Shuttle Input Gear has 25 Teeth. It is used on 430, 470, 530, 570, 580CK, 480B, 580B. Replaces G16623 (Item #: 180217, Ref: G16623) $142.72

Manual Shuttle Input Shaft - This Manual Shuttle Input Shaft has 28 Teeth and internal Splines. It is used on Case 430, 470, 530, 570, 580CK, 480B, 580B. It replaces A37617 (Item #: 113282, Ref: A37617) $338.51

Manual Shuttle Input Shaft - This Manual Shuttle Input Shaft has 28 teeth and internal splines. It is used on Case 430, 470, 530, 570, 580CK, 480B, 580B. It replaces G16626. (Item #: 180218, Ref: G16626) $342.00

Manual Shuttle Synchronizer - This Manual Shuttle Synchronizer is used on 430, 470, 530, 570, 580CK, 480B, 580B. It replaces A151114, A51874, G45049 (Item #: 156041, Ref: A151114) $358.51

Manual Shuttle Synchronizer Ring - This Manual Shuttle Synchronizer Ring is used 300, 320, 400, 430, 500, 530, 600, 630, 470, 570, 480, 480CK, 480B, 580, 580CK, 580B. Replaces 71840R1, G46077 (Item #: 179344, Ref: G46077) $29.90

Electrical System

Alternator - Fits (453 1977-1979 w/360 dsl), (715 1977-1979), (715 1977-1979 w/internal regulator), (815 1971-1976 gas), (815 1971-1979 dsl), (915 1971-1979), (1420, 1440 1981-1992 w/D358, 436 or 466 engine w/Delco), (1460 1981-1992 w/D358, 436 or 466 engine w/Delco 2 or 3 pin), (480B 1975 w/188 dsl), (870 1970-1975 w/4-336 dsl w/ opt. 3 pin), (970 1970-1978 w/6-401 dsl with opt. 3 pin), (1070 1970-1978 w/6-451 dsl with opt. 3 pin), (1090 1970 w/6-451 dsl), (1175 1971-1978 w/ 6-451 dsl w/opt 3 pin), (1270 1972-1978 w/6-451 dsl w/opt. 3 pin), (1370 1972-1978 w/6-504 dsl w/opt. 3 pin), (1570 1976-1978 w/6-504 dsl w/ opt. 3 pin), (2090 1978-1983 w/6-504 dsl), (2094 1983-1984 w/6-504 dsl), (2290 1978-1983 w/6-504 dsl), (2294 1983-1987 w/6-504 dsl), (2390, 2590 1978-1983 w/6-504 dsl), (2394 1985-1987 w/6-504 dsl), (2594 1983-1987 w/6-504 dsl), (2670 1974-1979 w/6-504 dsl), (3294 1983-1984 w/6-504 dsl). Replaces 1105068, 1103125, 1105170, 1103099, 1105423, 1105178, 1102940, 1103127, 1102928. (Item #: 110572, Ref: ADR0133) $119.00

Alternator - 12 volt, 63 amp. 3 Pin, Will replace a 2 pin as the 3rd pin is an accessory. For tractor models (480B 1975 with 188 dsl), 770 1970-73 with 4-251 gas and 1970-75 with 301 dsl), (970 1970-78 with 6-401 dsl), (1070 197-78 with 6-451 dsl), (1170 1970 with 6-451 dsl), (1175 1971-78 with 6-451 dsl), (1270 1972-78 with 6-451 dsl), (1370 1972-78 with 6-504 dsl), (1570 1976-78 with 6-504 dsl with), (2670 1974-79 with 6-504 dsl), (40C 1979 with DD 4-71). All Delco equipped. Replaces 1102866, 1102867, 1100580. (Item #: 111768, Ref: ADR0239) $113.00

Distributor Cap - Prestolite Distributor Cap, clip Type . Fits 470, 480B, 480CK, 570, 580B, 580CK, 680CK, 730, 770, 830, 870 all with one of the following Prestolite distributors: IBT-4101S, IBT-4101 or IBT-4101U. Replaces AT14692, 21A448, A24564, 531452R1, A24564, 71907C1, 1047221M91. (Item #: 105566, Ref: AT14692) $14.40

Fuse Holder - Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces: 578489, cap: A10958, A22874, A8006, D122429, D23834, D49077, F63019, G44876, T39463 (Item #: 112273, Ref: 376852R91) $10.90

Key Switch - 4 terminal, 3 position, with keys. For tractor models (1030 diesel), (430, 470, 480, 480B, 530, 570, 580, 580B, 584, 585, 586, 630, 730, 830, 930 all gas). (Item #: 153459, Ref: A24511) $20.30

Key Switch - 5 terminal, 3 position, with keys. For tractor models 1150E, 430, 470, 480, 530, 570, 580, 480B, 580B, 630, 730, 830, 930, 1200, 1470, W5A, 1155E all with diesel engines. (Item #: 178392, Ref: A24510) $36.00

Starter Solenoid - 12 volt, fits Delco starters 1108626, 1108174, 1108173, 1107886 and Prestolite numbers MDU7104A, MDU7102A. For tractor models 240, 300 LP, 340, 350, 400 LP, 430, 430CK, 450, 470, 480B, 480CK, 530, 570, 580CK, 580CKB. Replaces 1467, 1457, A40795. (Item #: 150223, Ref: DR1467) $19.70

Engine Bearings

No
Picture
Main Bearing Set, .010 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106093, Ref: MB364-10) $117.00

No
Picture
Main Bearing Set, .020 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: MBK364-20) $98.74

No
Picture
Main Bearing Set, Std - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106092, Ref: MBK364) $112.00

No
Picture
Rod Bearing, .010 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158557, Ref: A50977) $8.70

No
Picture
Rod Bearing, .020 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 160278, Ref: A50978) $11.20

No
Picture
Rod Bearing, .030 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158559, Ref: A50979) $10.10

No
Picture
Rod Bearing, Std - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158555, Ref: A50975) $14.80

Engine Gaskets

No
Picture
Lower Gasket Set with Crankshaft Seal - Used on G148, G148B, G159 and G164 gas engines, this set contains Rear Crankshaft Seal part number A51339, Front Crankshaft Seal part number A39110, Oil Pan Gasket part number A40710, Conversion Gasket Set part number A189527. The pan gasket if for pans without ears. Used on Case 430, 470, 445, 480B, 441, 310D, 430CK, 480CK, 440, 310G, 420B, 310F, 420C, 351, 511B, 350, 510B, 600B, 610B, 500B, 611B, W5, W3, 570, 545, 541, 540, 580B, 530CK, 580CK, 530, 530B (Item #: 142558, Ref: RP321253) $159.00

Overhaul Gasket Set - This Complete Engine Gasket Set With Crankshaft Seals fits tractors with 207 cubic inch engines and 188 Diesel engine above Engine Serial number 2656844. Replaces: A143000, A189537, A40712, A41426, A42001, A43198, A44758, A51891, G11950. (Item #: 106103, Ref: CKS1947) $192.00

Upper Gasket Set - For 207 Diesel engine in Models: 310, 310B, 320B, 330, 350, 420, 425, 430, 431, 441, 450, 450B, 470, 480, 480B, 480CKB, 480CKC, 480D, 480LL, 500, 500LK, 530, 530C, 531, 540C, 541, 541C, 570, 580, 580B, 580CK, 580CKB, 580D, 584, 600, 630, 640, 680CK, LCK430, LCK530, 540, 440, 610, 540. Upper Gasket Set includes Head Gasket. (Item #: 106108, Ref: A41425) $79.00

Valve Cover Gasket - This Valve Cover Gasket is used on 188 or 207 cubic inch diesel engines. Replaces A43030, G46866 (Item #: 158281, Ref: A43030) $14.70

Engine Rebuild Kits

Basic Engine Kit, G207D Diesel, Early - For DIESEL early SN# (up to 2869290) G207D engines. Piston replaces early 2.25 inch combustion bowl with 2.50 combustion bowl. Kit includes: Sleeves, pistons with rings, pins and retainers, complete gasket set, front and rear main seals. Fits tractors: 350, 480, 480B, 580C, 580CK, 580D, 584. Fits crawlers: 310, 350, 450, 450B, 500, 580. Fits forklifts: 584, 584C, 585. Fits Uniloaders 1740, 1845, 1855. Fits wheel loader: W11 (Item #: 130565, Ref: BEKC207DE) $741.00

Basic Engine Kit, G207D Diesel, Late - For DIESEL late SN# (2869291 and up)G207D engines. Piston has 2 1/2" combustion bowl. Kit includes: Sleeves, pistons with rings, pins and retainers, head gasket set, front and rear main seals. Order bearings seperately if needed. Fits tractors: 350, 480, 480B, 580C, 580CK, 580D, 584. Fits crawlers: 310, 350, 450, 450B, 500, 580. Fits forklifts: 584, 584C, 585. Fits Uniloaders 1740, 1845, 1855. Fits wheel loader: W11 (Item #: 130565, Ref: BEKC207DL) $741.00

Engine Overhaul Kits - Engine serial number MUST be given to determine proper Liner Kit ** Comes with Piston Liner Kit, Pistons, Piston rings, main bearings (please specify STD, .010, .020, .030), Conn rod bearings (STD, .010, .020, .030), cam bushing set, front and rear crank seals and complete gasket set. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D with D207 CID 4 cyl engine ** Engine serial number MUST be given to determine proper Liner Kit ** (Item #: OK105) $1271.21

Engine Parts

Camshaft - Camshaft. Use with 38931 cam gear. For 188 and 207 Diesel engines. Fits 430, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D. Replaces original part numbers: A153521, A2111, A36853, A39013 (Item #: 111338, Ref: DA153521) $187.00

Crankshaft - 188 CID diesel engines, 13 internal splines. For tractor models (430, 530 SN# 8262600 to 8297800), 430CK, 480B, 480C, 480D, 530CK, (580CK up to SN# 8685801), 584D, 585D, 586D, (310F up to SN# 3032301), 310G, 420, (450 up to SN# 3060305). Replaces A39146, A39150, G11889. MUST use bushing VT3370 to replace A39150 and G11889. Casting numbers G11740, G11741, A39151. (Item #: 100342, Ref: A151015) $542.00

Engine Pistons and Sleeves

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Used on Case Tractors with 124, 148 and 159 gas engines. Replaces original part numbers G46909, VT3375. (Item #: 128575, Ref: 1750000M1) $9.40

Engine Rings

No
Picture
Piston Ring Set - 3-3/8" bore, 12 compression rings at 3/32", 4 oil rings at 1/4". For tractor models 1737, 300, 300B, 310, 310C, 310D, 310E, 310F, 310G, 320, 320B, 500D, 556D, 400B, 400D, 420, 420B, 420BD, 420C, 430, 440, 441, 456D, 470, 480, 480B, 480CK. All using on of the following gas or LPG engines G148, VA148, LCK, G148B. (Item #: 129078, Ref: 2C7558) $37.50

Exhaust System

Exhaust Adapter - For use with the G2113 Exhaust Triple Outlet Manifold (0878R) used on the 188 and 207 Diesel engines. Inside diameter at top is 2 inches, 2 7/8 inches at base. 3 1/2" Bolt Spacing. Fits 430, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D, Forklifts; 1700, 1835, 1845, 1845S. (Item #: 101504, Ref: R0878A) $35.10

Exhaust Manifold - For G126, G148, G159 and G164 cubic inch gas engines on: 310D Crawler, 310F Crawler, 310G Crawler, 420B Crawler, 420C Crawler, 430 Tractor, 430CK Wheel Tractor, 440 Tractor, 441 Tractor, 445 Tractor, 470 Tractor, 480CK Wheel Tractor, 480B Wheel Tractor, 1737 Skid Loader, 1737S Skid Loader, 1835 Skid Loader, 1835B Skid Loader, M570AT Tug, W3 Wheel Loader, 530 Tractor, 530CK Wheel Tractor, 540 Tractor, 541 Tractor, 545 Tractor, 570 Tractor, 580CK Wheel Tractor, 580B Wheel Tractor, 1150 Windrower, 1845 Skid Loader, 1845B Skid Loader, 1845S Skid Loader and others. These manifold measures 15-5/8 inches on the outside bolt holes. Replaces: G1064, G2009 (Item #: 126359, Ref: G2009) $236.00

Exhaust Manifold - This triple outlet manifold replaces OEM part numbers G2042 and A39231. For tractor models 430, 470, 480, 480B, 530, 570, 580, 580B, 310D, 310E, 310F, 310G, 420B, 420C, W3 Wheel Loader. This is for a gas engine. Replaces OEM# G2042. Gasket Set Sold Separately. This unit is made to fit multiple applications and may have more ports that your tractor needs, comes with block-off plates for those ports not used. (Item #: 101500, Ref: R3543) $222.00

No
Picture
Exhaust Manifold, Dual Outlet - Manifold, dual outlet. For 188 and 207 diesel engines. Fits the following models 310E, 310F, 310G, 350, 350B, 420C, 430, 450, 470, 480, 480B, 480C, 480D, 480LL, 530, 570, 530B, 530C, 580D, 584, 584C, 584D, 585C, 585D, 586C, 586D, 630. (DEP) (Item #: 101502, Ref: 182084) $190.00

Exhaust Manifold, Triple Outlet - Exhaust Triple Outlet Manifold for 188 and 207 Diesel engines. Fits 430, 500, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D, Forklifts; 1700, 1835, 1845, 1845S. Also replaces A182084 and A39233. Exhaust Adapter available as Part # R0878A. Manifold Gaskets as Part #R0878G. (Item #: 101502, Ref: G2113) $190.00

Manifold Gasket Set - For use with G2113 Exhaust Triple Outlet Manifold (0878R) used on the 188 and 207 Diesel engines. Fits 430, 500, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D, Forklifts; 1700, 1835, 1845, 1845S. Replaces: G2113, A39233, A182084 (Item #: 101503, Ref: R0878G) $25.50

Manifold Gasket Set - For tractor models 430, 470, 480, 480B, 530, 570, 580, 580B, 310D, 310E, 310F, 310G, 420B, 420C, W3 Wheel Loader. This is for a gas engine. Replaces Oem numbers G2042, and A39231. (Item #: 101501, Ref: R3543G) $14.30

Fuel System / Air Intake

Carburetor Float - Zenith Carburetor Float Use w/ Zenith Carburetors: 11535, 11537, 11580, 11588, 11705, 11973, 12032, 12066, 12217, 12232, 12590, 12293, 12427, 12471, 12509, 12534, 12548, 12685, 12758, 12902, 12913, 12994, 13048, 13106, 13107, 13108, 13109, 13151, 13153, 13154, 13161, 13294, 13304, 13316, 13318, 13328, 13338, 13337, 13338, 13372, 13374, 13378, 13384, 13390, 13406, 13416, 13465, 13546, 13578, 13588, 13596, 13608, 13612, 13628, 13716, 13758, 13783, 13795, 13808, 13875, 13881, 13912, 13913, 13914, 13915, 13916, 13917, 13920, 13956, 14991, 14992, 14995, 14996, 14997, 14999. Replaces E1NN9550AA, 1508089M91, B51359, 70227103, 381027R1, 1K7630. (Item #: 108448, Ref: R4531) $24.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX936. For the following tractor models: 480B. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203247, Ref: 1225-CARB) $225.01

Fuel Injector - This New Pencil Style Fuel Injector is used on Case 188 and 207 cubic inch diesel engines. It replaces injectors marked 20671. Verify before ordering. Used on some of the following: 1835B Skid Loader, DH5 Trencher, 530CK Wheel Tractor, 1835 Skid Loader, 1255 Windrower, 580CK Wheel Tractor, 1150 Windrower, 480D Wheel Tractor, 1740 Skid Loader, 480B Wheel Tractor, 480C Wheel Tractor, 580B Wheel Tractor, 530 Tractor, 430CK Wheel Tractor, 480LL Wheel Tractor, 584D Forklift, 1845 Skid Loader, 585D Forklift, 470 Tractor, 586D Forklift, 450 Crawler, 430 Tractor, 660 Combine, 350B Crawler, 310G Crawler, 1845S Skid Loader, 350 Crawler, 570 Tractor, 480CK Wheel Tractor, 1845B Skid Loader, 580D Backhoe Loader, W11 Wheel Loader. Replaces 20671, A140829, A51234 (Item #: 115243, Ref: A140829) $44.87

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number A11208. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110, 7135-110. (Item #: 129312, Ref: CAV7135-110) $14.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: A11211, T7040 (Item #: 105364, Ref: 49923D) $3.30

Hydraulic System

No
Picture
Hydraulic Seal Kit - 3 Point Hitch Cylinder - For Case Construction and industrial models W14, 310, 350, 450, 480, 480B, 480C, 580, 580B, 580C, Replaces Case OEM number G32295, Rod: 1-1/4", Bore: 2-1/2", (Item #: 152973) $56.00

No
Picture
Hydraulic Seal Kit - Backhoe Cylinder - For Case Construction and industrial models 310, 350, 450, 480, 480B, Replaces Case OEM number D47896, Rod: 1-1/2", (Item #: 153022) $15.40

Hydraulic Seal Kit - Backhoe Cylinder - For Case Construction and industrial models W3, W7, W7C, W7E, W24, 310, 310E, 310F, 310G, 350, 430, 450, 480, 480B, 530, 580, 680B, 680CK, 750, 850, Replaces Case OEM number G33151, (Item #: 153671) $23.20

Hydraulic Seal Kit - Backhoe Loader Cylinder - For Case Construction and industrial models 26, 310G, 450, 480, 480B, 580F, 680C, Replaces OEM number 1543263C1, Rod: 1-3/4", Bore: 3", (Item #: 153231) $47.80

Hydraulic Seal Kit - Boom Bucket Cylinder - For Case Construction and industrial models 310, 350, 430, 480, 480B, 530, 580, 680CK, Replaces Case OEM number D42872, Rod: 1-3/4", (Item #: 152864) $15.90

Hydraulic Seal Kit - Bucket Cylinder - For Case Construction and industrial models W7, W9, W10, W14, 310, 350, 450, 480, 480B, 480C, 680, 680E, 780B, 780C, 780D, 850, 1150, Replaces Case OEM number G34636, Rod: 2-1/2", Bore: 4", (Item #: 153164) $54.00

Hydraulic Seal Kit - Bucket Tilt Cylinder - For Case Construction and industrial models 310G, 350, 480, 480B, 580, 580B, 580C, 580F, 680C, Replaces Case OEM number G32294, (Item #: 152945) $54.00

Hydraulic Seal Kit - Dipper Cylinder - For Case Construction and industrial models 480, 480B, 480C, 480D, 480E, Replaces Case OEM number 1543261C1, (Item #: 152917) $37.80

No
Picture
Hydraulic Seal Kit - Dipper Cylinder - For Case Construction and industrial models W7, W7C, W7E, W9, W9A, W9B, W9C, W9E, W10, W10B, W10C, W10E, W26B, 310G, 350, 450, 480, 480B, 580, 750, Replaces Case OEM number G32293, Rod: 2", Bore: 3-1/2", (Item #: 153026) $55.00

Hydraulic Seal Kit - Hydraulic Cylinder - For Case Construction and industrial models 26, 310, 350, 430, 480, 480B, 580, 680, Replaces Case OEM number D47203, (Item #: 153669) $10.60

Hydraulic Seal Kit - Lift Tilt Cylinder - For Case Construction and industrial models 310E, 310F, 310G, 350, 420C, 430, 450, 480B, 530, Replaces Case OEM number D42867, Rod: 1-1/4", (Item #: 152899) $19.80

Hydraulic Seal Kit - Loader Dozer Cylinder - For Case Construction and industrial models W3, W24, 310E, 310F, 310G, 350, 430, 450, 480, 480B, 530, 750, 850, Replaces Case OEM number D42870, Rod: 1-1/2", (Item #: 152874) $22.70

Hydraulic Seal Kit - Steering Cylinder - For Case Construction and industrial models 26, 480B, 480C, 580B, 580C, Replaces Case OEM number A44644, Rod: 3/4", Bore: 1-1/2", (Item #: 152871) $10.50

Hydraulic Seal Kit - Steering Cylinder - For Case Construction and industrial models 430CK, 480B, 480CK, 530CK, 580 (s/n 8685800-earlier), 580B, 580CK, 680CK, Replaces Case OEM number A36396, (Item #: 153668) $5.30

No
Picture
Hydraulic Seal Kit - Swing Cylinder - For Case Construction and industrial models W14, 310, 350, 450, 480, 480B, 480C, Replaces Case OEM number G34652, Rod: 1-1/2", Bore: 3-1/2", (Item #: 153027) $54.00

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 4410, A42294, A43639, A47179, D33182, L30464 (Item #: 111242, Ref: 28A116) $14.40

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $37.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, A24572, A40855, A42295, D71409, E98744, K962145. (Item #: 111241, Ref: 373662R91) $10.00

$Case 480B Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: B50223 (Item #: 150699, Ref: TLBULB12V) $0.50

Oil System

Oil Pump - For tractor models (585D, 586D with 188 diesel), (480B, 480C, 480D, 480LL, 530CK, 580B, 580CK with 188 engine), (580SD, 580C, 580D, with 207 engine), (1150, 1740, 1835, 1835B, 1845, 1845B with 188 engine). Replaces G37070 and A49050. (Item #: 123599, Ref: A38372) $319.00

PTO / Driveline

PTO Shield Mounting Plate - This plate is required for mounting a PTO shield on the following Case Tractors: D, DC, DC-3, DC-4, DH, DI, DO, DV, L (serial number 4200000 and up), LA, R, RC, S, SC, SI, SO, 200B, 210B, 211B, 300, 300B, 301, 302, 310, 311, 312, 320, 350, 351, 400B, 410B, 411B, 430, 431, 440, 441, 470, 480B, 500, 500B, 510, 511, 530, 530CK, 531, 540, 541, 570, 580B, 600, 600B, 610, 611, 614, 630, 631, 632, 640, 641, 642, 900. Replaces original part numbers: G16775, O5386AB and VT2297. (Item #: 127028, Ref: G16775) $35.30

Steering

Alloy Steel Ball - Chrome, 1", Grade 24 - For Case Construction and industrial models 430CK, 480B, 480C, 480CK, 480D, 480LL, 500, 530CK, 580, 580B, 580C, 580D, 580SD, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E, Replaces Case OEM number 211-21, (Item #: 168884) $6.10

Cylinder End, Female Thread - A= 2.440", B= .687" 18 I.D. RH thread. For tractor models 480CK, 530CK, 580CK, (480B SN# up to 8435171), (580B SN# up to 8741258). (Item #: 104476, Ref: A40963) $17.40

Power Steering Cylinder - This Power Steering Cylinder is used on 2WD models: 480B (SN: 8741258 and up), 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580B (SN: 8735171 and up), 580C, 580D, 580F, 580SD, 580SE, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E. It measures 16-1/4 inches center-to-center closed, 23 Inches center-to-center open. This is a double piston cylinder replaces single piston cylinder. 2 used per tractor, sold individually. Note: this will fit earlier B series, but power steering hoses will need to be adapted. Replaces: 234447A1, A137503, A51731, D128454, D84800 (Item #: 126877, Ref: A137503) $105.00

Power Steering Pump Cap - Reservoir, Includes Dipstick - For Case Construction and industrial models 480B, 480C, 480D, 480ELL, 580, 580B, 580C, 580D, Replaces Case IH OEM number A35967, A35967AM, Power Steering cap with dipstick, (Item #: 162366) $5.98

Steering Arm - Right Hand For 480, 480B, 580, 580B (Item #: 100331, Ref: A137742) $311.00

Steering Valve-without Column - This Steering Valve-without Column is used on Case Industrials: 480B, 480C, 580B and 580C. Replaces D89898, D63250 (Item #: 160084, Ref: D89898) $892.87

Steering Wheel - 15-1/4 inch diameter, 36 spline, 13/16 inch shaft, 3 covered spokes. For tractor models 480, 480B, 480C, 480D, 480LL, 580, 580B, 580C, 580D, 584C, 584D, 585C, 586C, 586D, 680B, 780, 770, 870, 970, 1090, 1170, 1175, 1270, 1370, 1570, 1896, 2090, 2094, 2290, 2294, 2096, 2390, 2394, 2470, 2590, 2594, 2670, 2870, 3294, 3394, 3594, 4690. Replaces A65544. (Item #: 122471, Ref: A61007) $72.00

Steering Wheel - 17-3/4" diameter, 7/8" keyed hub. For tractor models 200B, 300, 300B, 400, 400B, 430, 440, 441, 450, 470, 480, 480B, 500B, 600B, 700B, 800B. (Item #: 101415, Ref: A7668) $49.50

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.50

Tie Rod End - A= 2.190", B= .687", 18 RH thread. For tractor models 1394, 480B, 480C, 480CK, 480D, (480LL with std or long axles and std wheel based), 530CK, 580B, 580C, 580CK, 580D, 580F, 584E, 585D, 585E, 586E, (760, 860 trenchers). Replaces A40962, D120800, E42039 (Item #: 100326, Ref: A40962) $12.80

Tie Rod End - Used on Case / David Brown models with 4WD: 1390, 1394, 1494, 1594, 1690, 1690 Turbo, 1694 480B, 480C, 480D, 480E, 580, 580 Super D, 580B, 580C, 580D, 580E, 580F, 580G, 580SE, 584D, 584E, 584FL, 585D, 585E, 586D, 586E, 586FL. This tie rod end measures 105mm from the center of the ball joint to the end of the threads. The rod has M24 x 1.5 Left Hand threads. Replaces K956936, K262981, K88482, K262887, K260250 (Item #: 104473, Ref: K88482) $33.00

Tie Rod End, LH - Tie Rod End, LH. For tractor models 200B, 300B, 400B, 430, 430CK, 480B, 480CK, 530, 530CK, 580B, 580CK, 630. A= 3.125, B= .687, 18 LH thread. (Item #: 104475, Ref: G45369) $19.50

Tie Rod End, RH - Tie Rod End, RH. For tractor models 200B, 300B, 400B, 430, 430CK, 480B, 480CK, 530, 530CK, 580B, 580CK, 630, STW16, W110, 580. A= 3.125", B= .687", 18 RH thread. (Item #: 104474, Ref: G45368) $16.90

Wheels

Front Wheel Hub - For tractor models 770, 870, 970, 1070, 1175, 730, 830, 930-DOM, 1030, 2090, 3390, 2094, 2294, 1896, 2096, 480B, 430, 530, 480CK. Casting number 57332 (Item #: 100327, Ref: A57336) $117.00

Wheel Bolt - This wheel bolt fits the following tractor models: 200, 200B, 210B, 211B, 300, 300B, 301, 301B, 302, 302B, 310, 310B, 311, 311B, 312, 320, 320B, 400B, 410B, 411B, 420, 420B, 430, 430CK, 431, 435, 440, 441, 445, 470, 480, 480B, 480CK, 500B, 510B, 511B, 530, 530CK, 531, 535, 540, 541, 545, 570, 580, 580B, 580CK, 600B, 610B, 611B, 614B, 630, 631, 632, 634, 640, 641, 642, 644, and W3. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number O30739HT. (Item #: 108605, Ref: WB916) $2.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal - Case Eagle Decal, 2 inch. (Item #: 100513, Ref: R5170) $2.80

Decal - Case Eagle Decal, 1-1/4 inch printed on vinyl. (Item #: 183056, Ref: R5235) $2.60

Decal - Case Eagle Decal, 4 inch. (Item #: 100524, Ref: R1299) $5.60

Decal - Case Eagle Decal, 6 inch. (Item #: 100525, Ref: R1300) $7.50

Decal - Case Eagle Decal, 9 1/2 inch. (Item #: 100526, Ref: R1303) $9.30

Draft-O-Matic Decals - Draft-O-Matic Decals, Round (Set of 2) - Vinyl Cut. Decal is used in association with any other listed decal set if you have a DRAFT-O-MATIC. (Item #: 100517, Ref: R2247) $27.90

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

No
Picture
Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$Case 480B Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Case 480B Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Case 480B Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Case 480B Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Case 480B Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Case 480B Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Case 480B Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - Rain Caps are located in the EXHAUST category of the Accessories and Universal parts section.

NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Elbow and Strainer - Fits some Case models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Case 480B Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Eagle Hitch Leveling Knob, Rubber - For all models using Eagle Hitch. Replaces O4995AB. (Item #: 126108, Ref: A26845) $17.90

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Case Yellow, Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154618, Ref: TP160GAL) $108.00

No
Picture
Paint, Case Yellow, Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154616, Ref: TP160QT) $41.70

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Desert Sand, 1 Gallon - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108139, Ref: TP130GAL) $123.00

No
Picture
Paint, Desert Sand, 1 Quart - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108138, Ref: TP130QT) $40.00

No
Picture
Paint, Desert Sand, Spray Can - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. Ensure you have correct color. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108137, Ref: TP130SP) $11.50

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Power White, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100348, Ref: TP271GAL) $60.00

No
Picture
Paint, Power White, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100347, Ref: TP271QT) $23.30

No
Picture
Paint, Power White, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100346, Ref: TP271SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00