FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 580D Tractor Parts

[Categories] [All Case Models] [Print]

Brakes

Brake Actuating Drum Ball - For Case Construction and industrial models W5, W5A, 430, 480, 480B, 480C, 480CK, 480D, 480LL, 530CK, 580, 580B, 580C, 580D, 580SD, 584, 584C, 584D, 585, 585C, 585D, 586, 586C, 586D, Replaces Case OEM number 211-214, Diameter: 1/2", (Item #: 152216) $7.90

Brake Band - Brake Band for tractor models 430, 431, 435, 441, 445, 480, 530, 531, 535, 540, 541, 545, 470, 570, 630, 631, 632, 634, 640, 641, 642, 644, W3, 430CK, 530CK, W5, 480B, 480C, 480CK, 480D, 580B, 580C, 580CK, 580D, 580, 584, 584D, 585D, 586D, 586, 586C. 4 required per tractor. Replaces Case part number 1995397C1, 249018A2, 249018A3, A41728, A44719, A44721, A44756, A47683, A47716, G45468 . Also replaces 70276940, 70235610, 70277438. (Item #: 105398, Ref: 70277379) $31.00

Brake Disc - Bonded - For Case Construction and industrial models 480, 480B, 480C, 480D (s/n 16270319 - later), 480E, 480ELL, 480F, 480FLL, 480LL (s/n 16270319 - later), 580, 580B, 580C, 580D, 580E, 580K, 580L, 580M, 580SD, 580SE, 580SK, 580 Super L, 580 Super M, 584D, 584E, 585D, 585E, 586D, 586E, Replaces Case OEM number 1349141C3, 1349141C1, A153982, 1349141C2, 84415744, 19 Tooth, 8.0" O.D., Major: 2.512" Minor: 2.269" I.D., .439" Thick, (Item #: 152136) $61.00

Brake Housing, Left Side - This Left Side Brake Housing is used on Case Industrial models 480C, 480D, 480LL, 580C, 580D, 584C, 585C. It replaces part number A152923, A154557 (Item #: 182987, Ref: A152923) $214.28

Brake Housing, Right Side - This Right Side Brake Housing is used on Case Industrial Models: 480C, 480D, 480LL, 580C, 580D, 584C, 585. It replaces A152924 (Item #: 162167, Ref: A152924) $225.01

Brake Slave Cylinder - For Case Construction and industrial models 450, 450B, 450C, 480, 480B, 480C, 480D, 580, 580B, 580C, 580D (less turbo), 850B, 850C, 850D, 855C, 855D Replaces Case OEM number G109413, A51976, , Compatible with Case IH tractor models 4494, 4694, 4894, Rod Length: 2-3/4", Mounting Holes: 1-3/4" Center to Center, Mounting Holes Diameter: 1/4", (Item #: 127445) $36.00

No
Picture
Brake Spring - Band Return, Set of 4 - For Case Construction and industrial models W5A, 430CK, 480B, 480C, 480CK, 480D, 480LL, 500, 530CK, 580, 580B, 580C, 580D, 580SD, 584C, 584D, 585C, 585D, 586C, 586D, Replaces Case OEM number A157705, G48507, (Item #: 171579) $14.40

Clutch

No
Picture
Clutch Disc - For Case Construction and industrial models 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580C, 580D, 580K, 580SD, 580SE, Replaces Case IH OEM number D70672, Outside Diameter: 5.25", Teeth: 45, (Item #: 155476) $13.60

Pressure Plate Assembly - Used on Case models 420 (s/n 8297801-8656925), 430 (s/n 8297801-8656925), 440, 441 (s/n 8297801-8656925), 470, 480, 530, 570, 580, 640, 580D, this is an 11 inch pressure place with 3 levers. It has 6 springs, a 1-7/8 inch 29 spline center and a flat flywheel step. Replaces Case part numbers A39212, A37566 (Item #: 122018) $287.00

Cooling System

Radiator - Core size 19.5" wide, 19.750" high. For tractor models (1845 SN# 9855225 and up), 1845B, 1845S, 480D, 480LL, 580SD, 580D, 584D, 585D, 586D. (Item #: 101675, Ref: D81055) $486.00

Thermostat - 160 degree. For tractor models 1030, 1070, 1090, 1170, 1175, 1270, 1370, 1470, 1570, 1835, 1845, 2090, 2094, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 3294, 3394, 3594, 430CK, 4490, 4494, 4690, 4694, 480, 530CK, 580B, 580C, 580CK, 580D, 680C, 680E, 770, 780B, 780CK, 870, 970. Also replaces 11C16, A57641. (Item #: 113939, Ref: EAF8575BWG) $14.00

Drive Train

No
Picture
Clutch Disc - w/ 3 Tabs - For Case Construction and industrial models 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580D, 580K, 580SD, 580SE, Replaces Case OEM number D50041, ID: 6-1/8”, OD: 8-7/16”, (Item #: 162386) $21.00

Side Gear, RH with Differential Lock - 13/20 teeth, 17 spline. For tractor models 480C, 480D, 580C, 580D. (Item #: 126912, Ref: A50989) $247.00

Transmission Charge Pump - This Transmission Charge Pump is used on 350, 350B Loader, 480C Indust/Const, 480D Indust/Const, 480E Indust/Const, 480ELL Indust/Const, 480LL Indust/Const, 580C Indust/Const, 580D Indust/Const, 580K Indust/Const, 580SD Indust/Const, 580SE Indust/Const, 584C Indust/Const, 584D Indust/Const, 584E Indust/Const, 585C Indust/Const, 585D Indust/Const, 585E Indust/Const, 586C Indust/Const, 586D Indust/Const, 586E Indust/Const, 680B Indust/Const, 680C Indust/Const, 680E Indust/Const, 680G Indust/Const. Replaces 137093A1, D51231, L30488, R29995, AT101451 (Item #: 164162, Ref: 137093A1) $176.00

Electrical System

Alternator - 12 volt, 61 amp. For tractor models 580 Super D, 580 Super E, 580D, 2090, 2290, 2390, 2590, 2094, 2294, 2394, (2470 serial number 8762940 to 8825000 and 8826412 and up), 2590, 2594, 3294, (1070 serial number 8675001 and up), 1270, 1370, 1570, 2670, (970 serial number 8816812 to 8817164 and 8817283 and up), 480C, 480D, 480LL, 580C, 2500A, 464, 574, 674, 4166, 4186, 1086, 1486, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 886, 986, 3088, 3288, 3688, 3688HC, 5088, 5288, 5488, (Cub serial number 248125 and up), Cub 184, Cub 184 Lo-Boy, Hydro 70, Hydro 86, 666, 686, (815, 915 serial number 8001 and up), Hydro 186, Hydro 3488, 786. Replaces A46932, A46938, A47044, A47057, A47623, A47625, TY6600, 1102920, 1103160, 1103184, 1105164, 1105178, 1105514, 1105574, 20-7101161. (Item #: 110572, Ref: ADR0133) $119.00

Fuse Holder - Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces: 578489, cap: A10958, A22874, A8006, D122429, D23834, D49077, F63019, G44876, T39463 (Item #: 112273, Ref: 376852R91) $10.90

Ignition Switch - For tractor models 1080B, 1150G, 1150H, 1550, 1835B, 1835C, 1840, 1845B, 1845C, 2366, 2394, 2594, 3394, 3594, 4494, 4694, 5120, 5130, 5140, 5220, 5230, 5240, 5250, 550G, 570LXT, 580 Super E, 580 Super K, 580 Super L, 580D, 580K, 580L, 584E, 585E, 586E, 588G, 590, 590 Super L, 590 Super M, 621, 621B, 650G, 660, 680K, 680L, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 75XT, 760, 780C, 780D, 821, 821B, 821C, 850E, 850G, 855E, 85XT, 860, 8910, 8920, 8930, 8940, 8950, 90XT, 921, 921C, 95XT, C50, C60, MX 100, MX 110, MX 120, MX 135, MX 150, MX 170, MX 180, MX 200, MX 220, MX 240, W11B, W14B, W14C, W18B, W20C, W30, W36. (Item #: 156037, Ref: 282775A1) $14.50

Starter Assembly - New 3-bolt mounting flange. 12 volt, 13 tooth, 2.5KW, OSGR type w/three ear mount on DE housing. For tractor models Ind. Case Uniloader 1835B, 1845, 1845B, 1845S, ; Tractors: 480D, 480LL, 580C, 580D, 580SD; Crawlers: 350, 350B, 450B, 455; Forklifts: 584D, 585D, 586D. Replaces R39341 (Nippondenso 02800-5880) 104451A2R, 116930A1 (Item #: 119943, Ref: 116930A1) $169.00

Engine Bearings

No
Picture
Camshaft Bearings - For tractor models 430, 440, 441, 470, 480, 530, 570, 580B, 580C, 580D, 630 all diesel with tach drive. (Item #: 106097, Ref: 812032) $30.70

Gasket - Transmission - For Case Construction and industrial models 580, 580B, 580C, 580D, Replaces Case OEM number 1981241C1, (Item #: 153667) $2.50

No
Picture
Main Bearing Set, .010 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106093, Ref: MB364-10) $117.00

No
Picture
Main Bearing Set, .020 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: MBK364-20) $98.74

No
Picture
Main Bearing Set, Std - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106092, Ref: MBK364) $112.00

No
Picture
Power shuttle Forward Clutch Beleville Spring - For Case Construction and industrial models 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580D, 580K, 580SD, 580SE, Replaces Case OEM number D50047, Outside Diameter: 5.29", Teeth: 8, (Item #: 176467) $17.90

No
Picture
Rod Bearing, .010 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158557, Ref: A50977) $8.70

No
Picture
Rod Bearing, .020 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 160278, Ref: A50978) $11.20

No
Picture
Rod Bearing, .030 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158559, Ref: A50979) $3.30

No
Picture
Rod Bearing, Std - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158555, Ref: A50975) $14.80

Engine Gaskets

Overhaul Gasket Set - This Complete Engine Gasket Set With Crankshaft Seals fits tractors with 207 cubic inch engines and 188 Diesel engine above Engine Serial number 2656844. Replaces: A143000, A189537, A40712, A41426, A42001, A43198, A44758, A51891, G11950. (Item #: 106103, Ref: CKS1947) $192.00

Rear Crankshaft Seal - This rear crankshaft seal has a 4 inch Inside Diameter, a 5.004 inch Outside Diameter and is .5 inch wide. It Fits: 580, 580B, 580C, 580CK, 580D, 584, 584C, 584D, 585C, 585D, 586, 586C, 586D, 600, 600B, 610B, 611B, 614B, 630, 631, 632, 634, 640, 641, 642, 644, 660, 950, P50, T50, W11, W3, W5, W5A with late 148B, 159, 164, 188, 201 and 207 CI gas, LP and diesel engines. Replaces: 26-872, A36610, A39027, A39111, A51339, G13811, G13824 415953 (Item #: 107461, Ref: A51339) $21.20

Upper Gasket Set - For 207 Diesel engine in Models: 310, 310B, 320B, 330, 350, 420, 425, 430, 431, 441, 450, 450B, 470, 480, 480B, 480CKB, 480CKC, 480D, 480LL, 500, 500LK, 530, 530C, 531, 540C, 541, 541C, 570, 580, 580B, 580CK, 580CKB, 580D, 584, 600, 630, 640, 680CK, LCK430, LCK530, 540, 440, 610, 540. Upper Gasket Set includes Head Gasket. (Item #: 106108, Ref: A41425) $79.00

Valve Cover Gasket - This Valve Cover Gasket is used on 188 or 207 cubic inch diesel engines. Replaces A43030, G46866 (Item #: 158281, Ref: A43030) $13.70

Engine Rebuild Kits

Basic Engine Kit, G207D Diesel, Early - For DIESEL early SN# (up to 2869290) G207D engines. Piston replaces early 2.25 inch combustion bowl with 2.50 combustion bowl. Kit includes: Sleeves, pistons with rings, pins and retainers, complete gasket set, front and rear main seals. Fits tractors: 350, 480, 480B, 580C, 580CK, 580D, 584. Fits crawlers: 310, 350, 450, 450B, 500, 580. Fits forklifts: 584, 584C, 585. Fits Uniloaders 1740, 1845, 1855. Fits wheel loader: W11 (Item #: 130565, Ref: BEKC207DE) $741.00

Basic Engine Kit, G207D Diesel, Late - For DIESEL late SN# (2869291 and up)G207D engines. Piston has 2 1/2" combustion bowl. Kit includes: Sleeves, pistons with rings, pins and retainers, head gasket set, front and rear main seals. Order bearings seperately if needed. Fits tractors: 350, 480, 480B, 580C, 580CK, 580D, 584. Fits crawlers: 310, 350, 450, 450B, 500, 580. Fits forklifts: 584, 584C, 585. Fits Uniloaders 1740, 1845, 1855. Fits wheel loader: W11 (Item #: 130565, Ref: BEKC207DL) $741.00

Cylinder Kit - For Case Construction and industrial models W11, 450B, 455B, 580C, 580D, 584C, 585C, 586C, Compatible with Case Engine (s) D207 (s/n 2869291-later), Replaces Case OEM number A46382, (Item #: 166445) $86.00

Engine Overhaul Kits - Engine serial number MUST be given to determine proper Liner Kit ** Comes with Piston Liner Kit, Pistons, Piston rings, main bearings (please specify STD, .010, .020, .030), Conn rod bearings (STD, .010, .020, .030), cam bushing set, front and rear crank seals and complete gasket set. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D with D207 CID 4 cyl engine ** Engine serial number MUST be given to determine proper Liner Kit ** (Item #: OK105) $1271.21

Engine Rebuild Kit - Less Bearings - ESN 2869289-earlier, D207 - For Case Construction and industrial models W11, 450B, 455B, 580C, 580D, 584C, 585C, 586C, Compatible with Case Engine (s) D207 (s/n 2869289-earlier), 2.25" combustion bowl, OE piston # A51911, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106095, (Item #: 130566) $890.00

Engine Parts

Camshaft - Camshaft. Use with 38931 cam gear. For 188 and 207 Diesel engines. Fits 430, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D. Replaces original part numbers: A153521, A2111, A36853, A39013 (Item #: 111338, Ref: DA153521) $187.00

Connecting Rod - This Connecting Rod is used on G207G Diesel Engines. For Non-Turbocharged Engines. 1.250 Inch Piston Pin Bushing, 2.400 Inch Rod Bearing Journal. Replaces A182010, A51913 (Item #: 115880, Ref: A51913) $94.00

Crankshaft - 207 CID diesel, no splines. For tractor models W11, 580B, 580CK, 580C, 580D, 584C, 585C, 586C, 450, 450B, 455B. Replaces A51917. All with casting number 976321. Replaces DA144011, 976321, A51917. (Item #: 100343, Ref: A144011) $587.00

No
Picture
Cylinder to Plate Stabilizer Pin - For Case Construction and industrial models 580C, 580D, 580F, 580SD, Replaces Case OEM number D50695, (Item #: 167874) $15.90

Engine Rings

Piston Ring Set - Standard - Single Cylinder - For Case Construction and industrial models W11, 450, 450B, 455B, 580B, 580C, 580D, 580SD, 584C, 585C, 586C, Compatible with Case Engine (s) D207, DT207, Replaces Case OEM number A151892, Bore: 4.000", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" (1) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome Hi Tensile, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, (Item #: 129181) $47.20

Exhaust System

Exhaust Adapter - For use with the G2113 Exhaust Triple Outlet Manifold (0878R) used on the 188 and 207 Diesel engines. Inside diameter at top is 2 inches, 2 7/8 inches at base. 3 1/2" Bolt Spacing. Fits 430, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D, Forklifts; 1700, 1835, 1845, 1845S. (Item #: 101504, Ref: R0878A) $35.10

No
Picture
Exhaust Manifold, Dual Outlet - Manifold, dual outlet. For 188 and 207 diesel engines. Fits the following models 310E, 310F, 310G, 350, 350B, 420C, 430, 450, 470, 480, 480B, 480C, 480D, 480LL, 530, 570, 530B, 530C, 580D, 584, 584C, 584D, 585C, 585D, 586C, 586D, 630. (DEP) (Item #: 101502, Ref: 182084) $190.00

Exhaust Manifold, Triple Outlet - Exhaust Triple Outlet Manifold for 188 and 207 Diesel engines. Fits 430, 500, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D, Forklifts; 1700, 1835, 1845, 1845S. Also replaces A182084 and A39233. Exhaust Adapter available as Part # R0878A. Manifold Gaskets as Part #R0878G. (Item #: 101502, Ref: G2113) $190.00

Manifold Gasket Set - For use with G2113 Exhaust Triple Outlet Manifold (0878R) used on the 188 and 207 Diesel engines. Fits 430, 500, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D, Forklifts; 1700, 1835, 1845, 1845S. Replaces: G2113, A39233, A182084 (Item #: 101503, Ref: R0878G) $25.50

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Case models using dry air filters. It replaces L30414, S113982. (Item #: 121925, Ref: T23262) $6.30

Fuel Injector - This New Pencil Style Fuel Injector is used on Case 188 and 207 cubic inch diesel engines. It replaces injectors marked 20671. Verify before ordering. Used on some of the following: 1835B Skid Loader, DH5 Trencher, 530CK Wheel Tractor, 1835 Skid Loader, 1255 Windrower, 580CK Wheel Tractor, 1150 Windrower, 480D Wheel Tractor, 1740 Skid Loader, 480B Wheel Tractor, 480C Wheel Tractor, 580B Wheel Tractor, 530 Tractor, 430CK Wheel Tractor, 480LL Wheel Tractor, 584D Forklift, 1845 Skid Loader, 585D Forklift, 470 Tractor, 586D Forklift, 450 Crawler, 430 Tractor, 660 Combine, 350B Crawler, 310G Crawler, 1845S Skid Loader, 350 Crawler, 570 Tractor, 480CK Wheel Tractor, 1845B Skid Loader, 580D Backhoe Loader, W11 Wheel Loader. Replaces 20671, A140829, A51234 (Item #: 115243, Ref: A140829) $44.87

Hitch / Drawbar

Stabilizer Pin - For Case Construction and industrial models 580B, 580C, 580D, Replaces Case OEM number D50965, Length: 7.75", O.D. 1.50", (Item #: 170000) $44.70

Hydraulic System

Bucket Cylinder - For Case Construction and industrial models 580D, 580SD, 580SE, Replaces Case OEM number G109434, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 126914) $397.98

Bushing Boom Dipper Bucket - For Case Construction and industrial models W11, W11B, W24, W24B, W24C, W30, 26, 310, 310G, 350, 480C, 480CK, 480D, 480E, 480F, 570LXT, 580C, 580D, 580K, 580L, 580M, 580SD, 580SE, 580SK, 580 Super M, 590, 590 Super L, 590 Super M, 680CK, 680E, 680G, 680H, 680K, 680L, 750, 850, 850B, 850C, 850D, 850E, 855C, 855D, 855E, 1150, Replaces Case OEM number D30933, 1-1/2" ID, 1-7/8" OD, 1-1/4" Long, (Item #: 154383) $17.90

No
Picture
Hydraulic Seal Kit - Backhoe Dipper Cylinder - For Case Construction and industrial models 480, 480D, 480E, 480F, 580, 580D, 850, 855E, Replaces Case OEM number 1543294C1, Rod: 2-1/2", Bore: 3-1/2", (Item #: 153666) $46.20

Hydraulic Seal Kit - Bucket Cylinder - For Case Construction and industrial models W14, 480D, 580, 580D, 580SD, 580SE, 850, 855E, Replaces Case OEM number G109504, Rod: 2-1/2", Bore: 3-12, (Item #: 153055) $32.10

No
Picture
Hydraulic Seal Kit - Bucket Cylinder - For Case Construction and industrial models 480, 480C, 480D, 480E, 480ELL, 480F, 580, 580B, 580C, 580D, 580E, 580SD, 580SE, Replaces Case OEM number 1543253C1, Rod: 1-1/2", Bore: 2-1/2", (Item #: 153659) $31.60

Hydraulic Seal Kit - Bucket Cylinder - For Case Construction and industrial models W14 (L), 26, 350B, 480C, 480F, 480FLL, 580C, 580D, 580K, 580SD, 580SE, 580SK, 680K, 680L, 1150C, 1150D, 1155D, Replaces Case OEM number 1543262C1, Rod: 1-3/4", Bore: 3", (Item #: 153660) $34.90

No
Picture
Hydraulic Seal Kit - Bucket Dipper Cylinder - For Case Construction and industrial models W14, W14H, 580D, 580SD, 580SE, 850C, 850D, 855C, Replaces Case OEM number G109424, Rod: 2-1/2", Bore: 4", (Item #: 152981) $31.60

Hydraulic Seal Kit - Steering Cylinder - For Case Construction and industrial models W14, 350, 480, 480C, 480D, 480E, 480ELL, 580, 580C, 580D, 580SD, Replaces Case OEM number G109475, (Item #: 153006) $28.90

Hydraulic Seal Kit - Tilt Cylinder - For Case Construction and industrial models 580C, 580D, 580SD, 580SE, Replaces Case OEM number G109460, (Item #: 153004) $32.90

Miscellaneous

Boom Mount Bushing - For Case Construction and industrial models 580D, 580G, 580SD, 580SE, Replaces Case OEM number D91241, Length: 60 mm, Inside Diameter: 51.02 mm, Outside Diameter: 69.88 mm, (Item #: 168530) $15.98

No
Picture
Bushing - For Case Construction and industrial models W11, 26, 350, 480C, 480D (Dipper Arm), 480E, 480F, 580C, 580D, 580SD, 680L, 780B, 780C, 780D, 1150, 1155D, Replaces Case OEM number D46405, 1-3/4" ID, 2-1/8" OD, 3/4" Tall, (Item #: 152177) $16.90

Bushing - For Case Construction and industrial models 580C, 580D, 580SD, 580SE, 680E, 680G, 680H, 680K, 680L, 780B, 780C, Replaces Case OEM number D60159, Swing Cylinder to Trunion - Upper and Lower, O.D. 2.75", I.D. 2.38", Length: 1.51", (Item #: 165532) $13.98

Bushing - For Case Construction and industrial models 26, 480F, 480FLL, 580C, 580D, 580SE, Replaces Case OEM number D31219, (Item #: 170020) $204.00

Bushing - For Case Construction and industrial models 580, 580C, 580D, 580E, 680E, 680G, 680H, 680K, 680L, Replaces Case OEM number G34593, G34875, I.D. 2.00", O.D. 2.37", Length: 1.32", (Item #: 170058) $29.27

Bushing Case D50146 - For Case Construction and industrial models 26, 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 570LXT, 580C, 580D, 580K, 580L, 580M, 580SD, 580SE, 580SK, 580 Super L, 580 Super M, 584, 585, 586, 590, 590 Super L (Stabalizer Leg and 3 Point Hitch Frame), 760, 860, 1450 (suspension Guide Lever), Replaces Case OEM number D50146, (Item #: 152178) $20.20

Bushing - Lift Arm - For Case Construction and industrial models 450, 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580C, 580D, 580E, 580SD, 580SE, 680CK, Replaces Case OEM number D50698, ID: 2.009”, OD: 2.755”, Length: 1.598”, (Item #: 162388) $29.40

Bushing - Lift Arm, D30931 - For Case Construction and industrial models 450, 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580C, 580D, 580SD, 580SE, 680CK, Replaces Case OEM number D30931, ID: 1.509”, OD: 1.875”, Length: 2.75”, (Item #: 158768) $16.10

No
Picture
Bushing - Lift Arm, D37443 - For Case Construction and industrial models 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580C, 580D, 580E, 580F, 580G, 580SD, 580SE, 680CK, 680E, 680G, 680H, 680K, 680L, Replaces Case OEM number D37443, ID: 2.009”, OD: 2.755”, Length: 1.598”, (Item #: 162389) $36.58

Bushing - Lift Cylinder - For Case Construction and industrial models 26, 480C, 480D, 480E, 480F, 570LXT, 580C, 580D, 580K, 580L, 580SD, 580SE, 580SK, 580 Super L, 590, 590 Super L, 680CK, Replaces Case OEM number D40243, (Item #: 154429) $24.61

Cylinder Pin - For Case Construction and industrial models 480D, 480E, 480F (all Tower Cylinder to Boom Pin), 570LXT, 580D, 580K, 580L, 580M, 580SD, 580SE, 580SK, 580 Super L, 580 Super M (all Stabilizer Cylinder to Leg Pin), Replaces Case OEM number D26002, 47857126, Stabilizer Cylinder to Leg Pin, Tower Cylinder to Boom Pin, (Item #: 152189) $33.90

Dipper And Bucket Pin - For Case Construction and industrial models 570LXT, 580C, 580D, 580K, 580L, 580M, 580SD, 580SE, 580 Super L, 580 Super M, 590, 590 Super L, Replaces Case OEM number D141666, (Item #: 154407) $78.87

No
Picture
Dipper at Bucket Bushing - For Case Construction and industrial models 580B, 580C, 580D, 580E, 580SE, Replaces Case OEM number D55626, (Item #: 188815) $26.30

King Pin - For Case Construction and industrial models 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580C, 580D, 580SD, 580SE, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E, Replaces Case OEM number D72337, Diameter: 2", Length: 6.63", (Item #: 165533) $39.70

Pin - For Case Construction and industrial models 570LXT, 580C, 580D, 580K, 580L, 580M, 580SD, 580 Super L, 580 Super M, 590 Super L, Replaces Case OEM number D50696, (Item #: 152190) $18.98

Stabilizer Anchor Bushing - For Case Construction and industrial models 26, 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 550, 580C, 580D, 580M, 580 Super M, 584, 585, 650H, 650K, 750K, 850, Replaces Case OEM number D43940, (Item #: 152176) $17.40

No
Picture
Stabilizer Cylinder and Tilt Cylinder Bushing - For Case Construction and industrial models 580B, 580C, 580D, 580E, 580SE, 850D, 850E, Replaces Case OEM number D32865, Inside Diameter: 1-1/2", Outside Diameter: 1-7/8", Length: 7/8", (Item #: 187795) $19.50

Oil System

Oil Pump - For tractor models (585D, 586D with 188 diesel), (480B, 480C, 480D, 480LL, 530CK, 580B, 580CK with 188 engine), (580SD, 580C, 580D, with 207 engine), (1150, 1740, 1835, 1835B, 1845, 1845B with 188 engine). Replaces G37070 and A49050. (Item #: 123599, Ref: A38372) $319.00

Seats

Seat Back Cushion - This Seat Back Cushion is black vinyl on steel. It is used in buck style seats on Case 1070, 1090, 1170, 1175, 1270, 1370, 480C, 480D, 480E, 480F, 480LL, 580C, 580CK, 580D, 584, 585, 586, 680CK, 700, 770, 780, 870, 970. Replaces A42747 (Item #: 101213, Ref: A42747) $212.00

Steering

Alloy Steel Ball - Chrome, 1", Grade 24 - For Case Construction and industrial models 430CK, 480B, 480C, 480CK, 480D, 480LL, 500, 530CK, 580, 580B, 580C, 580D, 580SD, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E, Replaces Case OEM number 211-21, (Item #: 168884) $6.10

Axle End, Left Hand - For Case Construction and industrial models 480D, 480E, 480ELL, 580C, 580D, 580K, 580SD (Super D), 580SE (Super E), 580SK, Replaces Case OEM number D69360, Left Side Axle End, For Axle End, Right Hand use Item #: 104358, (Item #: 104357) $482.00

Axle End, Right Hand - For Case Construction and industrial models 480D, 480E, 480ELL, 480LL, 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D69359, Right Side Axle End, For Axle End, Left Hand use Item #: 104357, (Item #: 104358) $480.00

Gasket - Transaxle Top Cover - For Case Construction and industrial models 580, 580B, 580C, 580D, Replaces Case OEM number 1342370C1, (Item #: 153656) $4.80

Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675) $8.60

King Pin Kit - For Case Construction and industrial models 480C, 480D, 580C, 580D, 580E, 586E, Replaces Case OEM number D103156, (Item #: 128026) $84.00

Lock Pin - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003180-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D57486, Length: 4", Thread 1/2-20 NF, (Item #: 160534) $12.30

O-Ring - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003108-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number 238-5139, (Item #: 160536) $2.00

Pinion Gear Pin - For Case Construction and industrial models 480D (Transmission s/n 16270319-later), 480E (LL), 480ELL, 480F (LL), 480FLL, 580D, 580K, 580SD, 580SE, Replaces Case OEM number A153711, (Item #: 126902) $33.10

Pinion Gear Pin - For Case Construction and industrial models 480, 480C, 480D, 480LL, 580C, 580D, 580SD, 584, 585, 586, Replaces Case OEM number A146541, (Item #: 126911) $10.98

Power Steering Cylinder - This Power Steering Cylinder is used on 2WD models: 480B (SN: 8741258 and up), 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580B (SN: 8735171 and up), 580C, 580D, 580F, 580SD, 580SE, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E. It measures 16-1/4 inches center-to-center closed, 23 Inches center-to-center open. This is a double piston cylinder replaces single piston cylinder. 2 used per tractor, sold individually. Note: this will fit earlier B series, but power steering hoses will need to be adapted. Replaces: 234447A1, A137503, A51731, D128454, D84800 (Item #: 126877, Ref: A137503) $105.00

Power Steering Pump - Fits 580D, TLB, Forklift:580C, 584D, 585C, 586C, 584C, 585C, 480C, 480D, 580D, TLB (Item #: 111805, Ref: D84179) $171.00

Power Steering Pump Cap - Reservoir, Includes Dipstick - For Case Construction and industrial models 480B, 480C, 480D, 480ELL, 580, 580B, 580C, 580D, Replaces Case IH OEM number A35967, A35967AM, Power Steering cap with dipstick, (Item #: 162366) $5.98

Power Steering Pump - Case, D120526, D126580 - For Case Construction and industrial models 580D, 580SD, 580SE, 584D, 585D, 586D (All 4WD and 2WD S/N 987900 and Later), Replaces Case OEM number D126580, D93204, D120526, Additional Handling and Oversize Fees Apply To This Item, (Item #: 156773) $850.00

Ring Gear and Pinion - For Case Construction and industrial models 580C, 580D (All 2 W/D Non Turbo), Replaces Case OEM number A51980, Ring Gear Teeth: 43, Pinion Teeth: 7, (Item #: 126882) $249.98

Side Gear - Left Hand - For Case Construction and industrial models 480C, 480D, 480LL, 580C, 580D, 580SD, Replaces Case OEM number A50990, Fits Left Hand Side, For Side Gear - Right Hand use Item #: 126912, (Item #: 126913) $221.00

Spacer - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003108-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D72371, (Item #: 160537) $0.98

Spindle with Steering Stop - Left Hand - For Case Construction and industrial models 480D, 480LL (s/n 17003108-earlier), 580C, 580D, 584D, 585D, 586D, Replaces International OEM number D86344, Dimension A: 2.164", Dimension B: 1.780", Left Side, (Item #: 104352) $429.00

Spindle with Steering Stop - Right Hand - For Case Construction and industrial models 480D, 480LL (s/n 17003108-earlier), 580C, 580D, 584D, 585D, 586D, Replaces International OEM number D86343, Dimension A: 2.164", Dimension B: 1.780", Right Side, (Item #: 104351) $561.00

Steering Motor - Case, D91505 - For Case Construction and industrial models 580D, 580E, Replaces Case OEM number D91505, This unit has 5 hydraulic lines and 3 mounting studs on the bottom of valve, (Item #: 160085) $1129.01

Steering Wheel - 15-1/4 inch diameter, 36 spline, 13/16 inch shaft, 3 covered spokes. For tractor models 480, 480B, 480C, 480D, 480LL, 580, 580B, 580C, 580D, 584C, 584D, 585C, 586C, 586D, 680B, 780, 770, 870, 970, 1090, 1170, 1175, 1270, 1370, 1570, 1896, 2090, 2094, 2290, 2294, 2096, 2390, 2394, 2470, 2590, 2594, 2670, 2870, 3294, 3394, 3594, 4690. Replaces A65544. (Item #: 122471, Ref: A61007) $75.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Thrust Washer - For Case Construction and industrial models 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 570LXT, 580C, 580D, 580K, 580L, 580SD, 580SE, 580SK, 580 Super L, 584D, 584E, 585D, 585E, 586D, 586E, 590 Super L, Replaces Case OEM number D72372, 2.012" I.D., 2.730" O.D., (Item #: 160535) $6.98

Tie Rod End - A= 2.190", B= .687", 18 RH thread. For tractor models 1394, 480B, 480C, 480CK, 480D, (480LL with std or long axles and std wheel based), 530CK, 580B, 580C, 580CK, 580D, 580F, 584E, 585D, 585E, 586E, (760, 860 trenchers). Replaces A40962, D120800, E42039 (Item #: 100326, Ref: A40962) $12.80

Tie Rod End - Many two wheel drive Case industrial models use this tie rod end. It measures 3.750 inches from center of the ball joint to the end of the shaft. The shaft is 0.875 inches with 18 NF Left Hand Thread. Used on Case models 480C, 480D, 480E, 480F, 480LL, 580C, 580D, 580E, 580G, 580SD, 580SE, 584D, 584E, 585D, 585E, 586D, 586E, 586FL. (Item #: 104469, Ref: D88492) $23.50

Tie Rod End - Many two wheel drive Case industrial models use this tie rod end. It measures 3.750 inches from center of the ball joint to the end of the shaft. The shaft is 0.875 inches with 18 NF Right Hand Thread. Used on Case models 480C, 480D, 480E, 480F, 480LL, 580C, 580D, 580E, 580G, 580SD, 580SE, 584D, 584E, 585D, 585E, 586D, 586E, 586FL. (Item #: 104468, Ref: D88491) $18.70

Tie Rod End - Used on Case / David Brown models with 4WD: 1390, 1394, 1494, 1594, 1690, 1690 Turbo, 1694 480B, 480C, 480D, 480E, 580, 580 Super D, 580B, 580C, 580D, 580E, 580F, 580G, 580SE, 584D, 584E, 584FL, 585D, 585E, 586D, 586E, 586FL. This tie rod end measures 105mm from the center of the ball joint to the end of the threads. The rod has M24 x 1.5 Left Hand threads. Replaces K956936, K262981, K88482, K262887, K260250 (Item #: 104473, Ref: K88482) $33.00

Tie Rod End - This tie rod end measures 4.16 inches from center of knuckle to end of threads and threads are 24 x 1.5 Metric RH Threads. For tractor models 584D, 585D, 586D, 584E, 585E, 586E, 584FL, 580D, 580 Super D, 580SE, 480E, 480LL. (Item #: 104472, Ref: K260254) $29.00

Tie Rod End - This tie rod end measuress4.16 inches from center of knuckle to end of threads and threads are 24 x 1.5 Metric Left Hand Threads. For tractor models 584D, 585D, 586D, 584E, 585E, 586E, 584FL, 580D, 580 Super D, 580SE, 480E, 480LL. (Item #: 104473, Ref: K260250) $33.00

Wheels

Front Wheel Hub - For tractor models 1270, 1370, 1570, 1896, 2096, 2390, 2394, 2590, 2394, 2594, 1896, 2096, 480C, 480D, 480E, 580C, 580D, 580E, 580F, 580K, 580L, 580M, 580SD, 580SK, 580SL, 580SM, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E, 590, 590SL, 680E, 680G, 680H, 780B, 780B, 780C. This hub uses WBKCA3 bearing kit (not included). Replaces A63799, A66759 (Item #: 100329, Ref: A66759) $98.00

Lug Bolt - Verify size before ordering. Many tractors use more than one size. This Lug Bolt measures 5/8 inch by 18 thread. The overall lenght is 1.5 inches. The thread lenght is 1.38 inches. Replaces 98A561LB (Item #: 108604) $4.50

Wheel Bearing Kit - For tractor models 1270, 1370, 1570, 1896, 2096, 2390, 2394, 2590, 2394, 2594, 1896, 2096, 480C, 480D, 480E, 580C, 580D, 580E, 580F, 580K, 580L, 580M, 580SD, 580SK, 580SL, 580SM, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E, 590, 590SL, 680E, 680G, 680H, 780B, 780B, 780C. Kit contains 1 each of the following p/n LM603049 (Cone), LM603011 (Cup), JLM506849 (Cone), JLM506180 (Cup), A611448 (Seal), A61449 (Seal). (Item #: 157577, Ref: WBKCA3) $54.37

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal - Case Eagle Decal, 2 inch. (Item #: 100513, Ref: R5170) $2.80

Decal - Case Eagle Decal, 1-1/4 inch printed on vinyl. (Item #: 183056, Ref: R5235) $2.60

Decal - Case Eagle Decal, 4 inch. (Item #: 100524, Ref: R1299) $5.60

Decal - Case Eagle Decal, 6 inch. (Item #: 100525, Ref: R1300) $7.40

Decal - Case Eagle Decal, 9 1/2 inch. (Item #: 100526, Ref: R1303) $9.30

Draft-O-Matic Decals - Draft-O-Matic Decals, Round (Set of 2) - Vinyl Cut. Decal is used in association with any other listed decal set if you have a DRAFT-O-MATIC. (Item #: 100517, Ref: R2247) $27.80

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.60

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

No
Picture
Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$Case 580D Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Case 580D Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Case 580D Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Case 580D Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Case 580D Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Case 580D Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Case 580D Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - Rain Caps are located in the EXHAUST category of the Accessories and Universal parts section.

NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Elbow and Strainer - Fits some Case models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Case 580D Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $35.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Eagle Hitch Leveling Knob, Rubber - For all models using Eagle Hitch. Replaces O4995AB. (Item #: 126108, Ref: A26845) $17.70

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.90

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.50

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Case Yellow, Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154618, Ref: TP160GAL) $108.00

No
Picture
Paint, Case Yellow, Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154616, Ref: TP160QT) $41.70

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Desert Sand, 1 Gallon - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108139, Ref: TP130GAL) $123.00

No
Picture
Paint, Desert Sand, 1 Quart - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108138, Ref: TP130QT) $40.00

No
Picture
Paint, Desert Sand, Spray Can - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. Ensure you have correct color. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108137, Ref: TP130SP) $11.50

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Power White, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100348, Ref: TP271GAL) $60.00

No
Picture
Paint, Power White, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100347, Ref: TP271QT) $23.30

No
Picture
Paint, Power White, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100346, Ref: TP271SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $278.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $103.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00