International Harvester / Farmall 2500 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Brakes
Brake Disc - 10.190 inch outside diameter, 15 internal splines. For tractor models Used on International models 2400, 2400A, 248, 2500, 2500A, 268, 3220, 3230, 380B, 385, 395, 4210, 4230, 4240, 454, 464, 474, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84. Replaces 1027256C1, 114621C1, 114622C2, 399734R1 (Item #: 105452, Ref: 114622C2) $105.15
Brake Master Cylinder Repair Kit - For International / Farmall tractor models Hydro 84, 248, 258, 268, 278, 385, 454, 464, 474, 475, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 3125824R1, (Item #: 164006) $20.30
Brake Plate - The measurements on the Brake Plate are ID: 8 1/8 inches (206mm) with 3 tabs, OD: 10 1/4 inches (259mm). This part replaces 399736R3, 984439C1. Used on International models 2400, 2400A, 248, 2500, 2500A, 268, 3220, 3230, 380B, 385, 395, 4210, 4230, 4240, 454, 464, 474, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84 (Item #: 105456, Ref: 399736R3) $82.00
No Picture Brake Ring, Used - For International tractor models 258, 278, 464, 574, 585, 674, 885, 2400, 2500, Replaces International OEM nos 399736R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443803) $50.01

Clutch
No Picture Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-3/4 inch 16 spline, 13/16 inch pilot. For tractor models 300, 330, 340, 350, 504, 544, 606, 656, 2500, 2504, 2544, 2606, 2656, (3444 with dial 9 inch, 11 inch discs). (Item #: 122257, Ref: S.70921) $26.30
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $26.30
Clutch Disc - 10-1/2 inch diameter, 1-1/8 inch hub, 10 spline. For tractor models 300, 330, 340, 350, 460, 504, 655, 606, 2500, 2504, 2544, 2606, 3616, 8000. (Item #: 166104, Ref: 384633R91) $189.00
Clutch Disc, Organic - New, 10.5 inch, spring loaded, 1.125 inch spline diameter, 10 splines. For tractor models 2500, 2504, 2544, 2606, Farmall 300, 330, 340, Farmall 350, (3616 diesel serial number up to 2117 or gas up to serial number 1945), 460, 504, 544, 606. (Item #: 156475, Ref: 360488R92) $96.00
Clutch Kit, 10-1/2 Inch - This remanufactured single stage clutch kit includes a 10 1/2 inch, 9 spring, 16 spline, 1 11/16 inch hub remanufactured pressure plate assembly, a 10 1/8 inch, 10 spline, 1 1/8 inch hub, 4 pad remanufactured clutch disc; new release bearing and two new pilot bearings. For tractors: 300, 320, 330, 340, 350, 460, 504, 544, 606. Industrial: 2500, 2504, 2544, 2606, 3616 (gas to serial number 1945 and diesels to serial number 2117). (Item #: 202008, Ref: 360746NC) $329.60
Clutch Release Fork - This Clutch Release Fork is used with 1970934C1 Clutch Bearing Carrier when used with a 12 inch clutch and 1971045C1 Clutch Bearing Carrier when used with an 11 inch clutch. Replaces 398342R2. (Item #: 111733, Ref: 398342R2) $79.00
Pressure Plate, Remanufactured - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2500, 2504, 2544, 2606, 3514, 3616, 8000, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206066) $122.01

Cooling System
Water Pump - This water pump comes with gaskets and hub. It is a 3 bolt pump for models 210, 230, 2500, 2504, 275, 3514, 375, all with C153 gas engine. Casting number 375741. Replaces part numbers 375736R91, 375736R91-R, and 375742R92-R. (Item #: 110989, Ref: 375742R92) $185.00

Decals and Emblems
No Picture Decal Set - Hood only set for 2500. (Item #: 183414, Ref: R3642) $63.00
Front Emblem - Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86. (Item #: 108481, Ref: 2751846R1) $19.10

Drive Train
No Picture Hydrostatic Transmission, Remanufactured, 573098R - For International / Farmall tractor models Hydro 84 (With Hand Control), 574 (With Hand Control), 2500 (With Hand Control), Replaces International OEM number 573098R, (Item #: 200263) $8100.01
Hydrostatic Transmission, Remanufactured, 573098R - For International / Farmall tractor models Hydro 84 (With Foot Control), 574 (With Foot Control), 2500 (With Foot Control), Replaces International OEM number 573098R, (Item #: 205089) $8100.01
Transmission Input Shaft Oil Seal - This transmission input shaft oil seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: 2500, 2500A, 464, 574. Replaces: 351276R91, 358775R91, 358804R91, 358815R91, 358838R91, 382230R91, 383333R91, 47703D, 530098R91, 65418C1 (Item #: 169955, Ref: 471765) $9.10

Electrical System
Starter, Diesel - For 179/239 Diesel engines. 12 volt, 10 tooth, clockwise rotation. For tractor models (454D 1970 to 1973 with D-179 diesel), (464D 1973 to 1978 with D-179 Diesel), (574D 1970 to 1978 with D-239 diesel), (674D, 674DRC 1978 to 1984 with D-239 diesel), (2500A-D, 2500B-D 1972 to 1974 with D-239 diesel), (715D 1971 to 1974 with D-301 diesel). Replaces 1113690, 1113650. (Item #: 102202, Ref: SDR0076) $312.91
Switch - Ignition switch, 6 prongs, includes 2 keys. For tractors: Hydro 84, 354, 454, 464, 484, 574 to serial number 114908, 584, 674, 684, 784, 884, 2300, 2400, 2500 to serial number 114908. For H, HV, M, MD, MDV, MTA, MV, Super M. (Item #: 111509, Ref: 529800R91) $8.10
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.50

Engine Bearings
No Picture Main Bearing. Set .030" Oversize - For International / Farmall tractor models 340, 504, 2500, 2504, 3514, Compatible with International Construction and industrial models TD340 (Crawler), Compatible with International Engine (s) D166 (Diesel), D188 (Diesel), Replaces International OEM number RP92730, (Item #: 167239) $16.98
Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $8.80

Engine Gaskets
Conversion Gasket Set - Lower - For International / Farmall tractor models Hydro 84, 544, 574 (Engine s/n D103203-later), 584 (Engine s/n D319017), 585, 624, 654, 664, 674, 684 (Engine s/n D475097), 685 (Engine s/n D679081-later), 784, 884 (Engine s/n D052919-later), 885, 2500 (Engine s/n D103203-later), 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7, TD7 (E, Engine s/n 53692-later), TD8 (C), TD8 (E, Engine s/n 5988-later), 100, 100 (E, Engine s/n 53692-later), 125, 125 (C), 125 (E, Engine s/n 5988-later), 250A (Gear Drive, Engine s/n 640235-later), 260A (Engine s/n 706836-later), 270A, Compatible with International Engine (s) D206, D239, D246, D268, DT268, Compatible with International Hay Cutting (s) 275, 375, 4000 (Engine s/n D021186), 5000 (Engine s/n D021186), 5500 (Engine s/n D021186), Replaces International OEM number 1967011C1, 3136813R99, 3228431R92, Replaces McCormick OEM number 3228431R92, Contains all gaskets necessary to complete an overhaul that are not included in head set, (Item #: 106727) $59.00
No Picture Manifold Gasket - For International / Farmall tractor models B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2500, 2504, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 500, Replaces International OEM number 352014R4, (Item #: 167139) $7.30
Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $21.90
No Picture Valve Cover Gasket - For International / Farmall tractor models 340, 504, 2500, 2504, 3514, Compatible with International Construction and industrial models TD340, Replaces International OEM number 308382R1, (Item #: 169012) $76.00

Engine Rebuild Kits
Cylinder Kit - "Dominator" - For International / Farmall tractor models Hydro 86, 385, 584, 585, 686, 706, 756, 2500, 2500A, 2500B, 2706, 2756, Compatible with International Engine (s) D155, D206, D310, Replaces International OEM number 3228771R91, (Item #: 128732) $131.00
Engine Rebuild Kit - Less Bearings, C153 - For International / Farmall tractor models 444, 504, 2444, 2500, 2504, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 4000, Compatible with International Engine (s) C153 (gas), Compatible with International Hay Cutting (s) 210, 225, 230, 275, 375, Bore: 3.375", Stroke: 4.250", Kit includes: Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106591, (Item #: 130595) $573.00
No Picture Piston - .040" Oversize - For International / Farmall tractor models 444, 504, 2444, 2500, 2504, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 4000, Compatible with International Engine (s) C153 (Gas/LP, 4 cylinder), Compatible with International Hay Cutting (s) 210, 225, 230, 275, 375, Replaces International OEM number 378185R92, Includes pin and retainer clips, Does not include piston rings, Oversize: .040", (Item #: 185592) $461.00

Engine Parts
Balancer - This Balancer is used in D206, D239, D246 engines. It replaces original part numbers 3132874R91, 3132874R92, 3132874R93, 3228366R91, 3132895R92, 3132895R91, 3132874R94. (Item #: 104256, Ref: 3132874R93) $342.00
Connecting Rod, Reconditioned - The Reconditioned Connecting Rod is used in 454, 464, 574, 674, 484, 684, 784, 884, 485, 585, 685, 785, 885, 495, 595, 695, 895, 2400, 2500, 3400, 3500, 3600, 250A, 260A tractors with D-179, D-239, D-246 Engines. Replaces 1967032C1 and 3055030R24. There is a core charge of $25, when you return your old part, we'll refund the core. (Item #: 210200, Ref: 3055030R24) $109.01
Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01
Connecting Rod, Used - For International tractor models 330, 340, 460, 504, 560, 656, 660, 706, 2500, 2504, 2606, 2706, 3514, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D166, D188, D236, D282, D301, Replaces International OEM nos 306280R12, Replaces Casting nos 306280, 306280R, 306280R1, Diesel Engines, Length Center to Center: 7.250", Housing Bore: 2.4995" - 2.5000", Pin Diameter: 1.1252" - 1.1258", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498382) $50.01
Crankshaft - For tractor models 684, 685, 695, 784, 4210, 4230, (4240 with D239 engine). Replaces 3144626R91, 3144626EX, 3132928R94, 3132752R11, 3132982R94, 3132928R93, 3132928R92, 3132928R91, 3132982R93, 3132982R92, 3132982R91, 3055038R21, 3055790R91 (Item #: 100784, Ref: 3144626R92) $653.00
Crankshaft Balancer Gear - This Balancer Gear is used on D206, D239 and D246 Engines. It has 80 teeth. Replaces 3136237R1. (Item #: 158267, Ref: 3136237R1) $116.00
Crankshaft Gear - This Crankshaft Gear has 33 teeth. It is used on D155, D179, D206, D239, D246 and D268 Engines. Replaces original part number 3055028R1. (Item #: 150037, Ref: 3055028R1) $155.00
Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90
Timing Gear Cover, Used - For International tractor models 574, 674, 2500, Compatible with International Construction and industrial models 3400, Compatible with International Engine(s) D239, Replaces International OEM nos 3136244R91, 3136057R14, Front, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436862) $295.01
Valve Seal - This is a positive type valve seal used on International Diesel Engines. Replaces 3218398R91, 3218399R1, 3228677R91 (Item #: 128633) $2.70
Valve Train Kit - For International / Farmall tractor models 544, 574, 584, 585, 664, 674, 684, 784, 785 (diesel), 884, 885, 2500, 2500A, 2500B, Engine (s): D206, D239, D246, D268, Includes: Intake Valves, Exhaust Valves, Valve Guides, Valve Springs, Valve Keepers, (Item #: 120318) $291.00

Exhaust System
Muffler - Vertical muffler for gas tractors, fits engines C146, C153, and BC144. Inlet inside diameter 1-15/16 inch, outlet outside diameter 2 inches, length 27 inches, diameter 5-1/2 inches. For tractor models 424, 2424, 444, 504, 2444, 2500, 2504, 3514, 3444. For 2424, 2444, 2500, 2504, 3444, 3514, 424, 444, 504. (Item #: 100808, Ref: 403825R1) $47.30
Muffler, Aluminized - Vertical muffler for gas tractor, fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models H, M, MD, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. Replaces 350601R95, 370773R91, 357288R92, 370644R91, 403551R1. For a black version order Item# 100807 (Item #: 185584, Ref: 370644R92) $42.30
Muffler, Black - This is a black version of 370644R92. Vertical muffler for gas and diesel applications.Fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models H, M, MD, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. Replaces 350601R95, 370773R91, 357288R92, 370644R91, 403551R1 (Item #: 100807) $34.30

Fuel System / Air Intake
Fuel Filter, CAV type - Fuel filter for tractor models 2300, 2400, 2424, 2444, 248, 2500, 2500A, 258, 268, 3414, 3514, B414, 1294, 1394, 1494, 1594, 2350, 276, 278, 354, 364, 384, 385, 424, 433, 434, 444, 454, 484, 485, 533, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 784, 785, 833, 844, 884, 885, 201. Replaces: 1502155C91, 1966515C1, 3044506R93, 3144477R92, 796051R91, P143287. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80
Fuel Filter / Spin On - For tractor models 385, 454, 484, 544, 574, 664, 674, 684, 685XL, 686, 706, 756, 785, 786, 826, 884, Hydro 86, 2400, 2500, 3088, 3288. (Item #: 125844, Ref: 3132428R2) $18.50
Fuel Sending Unit - For International / Farmall tractor models 454, 464, 574, 674, 2400, 2500, Replaces International OEM number 531974R2, (Item #: 119769) $67.00
Fuel Shutoff Valve - The threads on this fuel shutoff valve are 1/2 - 20 and 3/8 - 18 NPTF. Used on C50, C60, C70, C80, C90, C100, 385, 395, 485, 495, 585, 595, 685, 695, 785, 885, 895, 995, 3220, 3230, 4210, 4230, 4240, Hydro 84, 248, 258, 268, 278, 385, 454, 464, 474, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2400A, 2500, 2500A (Item #: 135040, Ref: 528926R1) $23.90
Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models B275, 2404, 2424, 2444, 340, 3414, 3444, 404, 424, 444, 2500, 2504, 504, Farmall Rowcrop 350, International Utility 350. It replaces original part numbers: 362998R91, 379660R91, and 407076R91. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Item #: 186846, Ref: B9NN9A660A) $85.65
Throttle Knob - For tractor models 384, 454, 464, 544, 574, 656, 664, 666, 674, 686, 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 2400, 2500, 2544, 2656, 2756, 2826, 2856, 3110, 4366, (4386, 4568, 4786 4WD), Hydro 70, Hydro 86, Hydro 100. (Item #: 111041, Ref: 397931R2) $6.80

Hitch / Drawbar
Leveling Fork Nut - This Leveling Fork Nut is used with 3121964R1 and 402635R4 fork. Replaces original part number 527937R1. (Item #: 110735, Ref: 527937R1) $7.00
Leveling Yoke Left Hand - This Left Hand Leveling Yoke is 19.250 inches long and 0.875 inch, 9 UNC thread. It replaces original part numbers 527935R1, 527948R91 (Item #: 124678, Ref: 527948R91) $33.10

Lights
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $14.00
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.10
Sealed Beam Bulb 12V - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $26.80
Sealed Beam Bulb, 6 Inch - The Sealed Beam Bulb is 6 Volt, 5.625 inches in diameter and has two contacts. It replaces original part number 371457R91. (Item #: 111244, Ref: 1002802M91) $19.30
Switch, Light - Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908).376851R92 (Item #: 125705, Ref: 376851R91) $30.20

Miscellaneous
Pilot Relief Valve, Used - For International tractor models Hydro 100, 454, 574, 656, 766, 856, 966, 1026, 1066, 1456, 1466, 1468, 2400, 2500, 2656, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 388208R93, 2000 PSI, For a new version of this item use Item #: 154338, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498628) $113.71

Oil System
Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10
Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60

PTO / Driveline
Ball Bearing - Bearing has multiple applications for Farmall and IH tractors including 1-1/8 inch PTO output shaft bearing, forward and reverser clutch shaft bearing, a transmission countershaft rear bearing, a transmission input shaft bearing. Measures 1.181 inch inside diameter, 2.440 outside diameter. and 0.629 wide. Replaces: 112028R91, 116753A1, 210064, 23874D, 3100294R91, 3160416R91, 3174392R91, 3177807R1, 42842VA, 610020C91, 703980R91, 703981R91, 704771R91, 704771R92, 758352R91, 758354R91, 84004469, ST212, ST213, ST213T, ST429 (Item #: 180397, Ref: 9N715BC) $6.10
Independent PTO Clutch Kit - Kit includes 4 friction plates, 6 steel, 6 springs, 2 piston seals. For tractor models 454, 574, 2400, (2500 up to serial number 100000). Replaces 534934R91, 534934R92, 534934R1, 401723R1, 401724R1, 401715R1 (Item #: 172830, Ref: 534934R92) $98.00

Sheet Metal / Body Parts
No Picture Battery Door, Metal - This Battery Door is 20-3/8 inches long by 15 3/8 inches wide. It is metal and replaces original fiberglass. It is used on 2500 (Industrial), 454, 464, 574, 674, Industrial: 2400; Replaces: 3113425R1, 401933R1 (Item #: 104333, Ref: 401933R1) $122.08
Fender Handle Grommet - Outside diameter 5.750 inch x 2.750 inch, inside diameter 4.500 inch x 1.500 inch. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574 series A, 656, 66, 666, 674, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2500 series A, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256. Replaces 235700A1, 388940R1.235700A2 (Item #: 103959, Ref: R20759) $9.00
Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $215.00
Suitcase Weight with IH Logo, Small Handle, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 258, 268, 274, 284, 385, 433, 434, 454, 464, 474, 484, 544, 585, 633, 656, 664, 666, 674, 684, 685, 686, 733, 766, 784, 786, 826, 884, 885, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 2544, 2656, 2826, Replaces International OEM nos 383393R2, 71200C1, 100 lbs, IH Logo, Small Handle, No "L" Cutout, Curved Bottom, Color may vary, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430803) $147.01
No Picture Weight - Suitcase, Front - For International / Farmall tractor models Hydro 84, Hydro 86, Hydro 100, Hydro 186, 274, 284, 464, 544, 666, 674, 686, 766, 786, 886, 966, 986, 1066, 1466, 1468, 1566, 1568, 1586, 2400, 2500, 2544, Replaces International OEM number 383392R2, 71199C1, Weight: 70 lbs, Comes In Red Primer, Thickness: 1-7/8", (Item #: 119701) $108.00

Steering
Bushing, Front Axle Steering Arm - For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. Replaces 153687C1. (Item #: 104494, Ref: 405574R1) $6.80
Bushing, Front Axle, Steering Arm - Associated with 379555R11 steering arm. For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. (Item #: 104493, Ref: 379748R1) $9.00
Power Steering Clevis End - This Power Steering Clevis End has a pin hole of 20 MM (.787 inches) and fits cylinder 188842A1. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 549670R2. (Item #: 113280, Ref: 3125306R1) $43.80
Power Steering Cylinder - Complete cylinder with 1 inch diameter shaft. Includes 549670R2 Clevis. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 400587R1, 549667R91, 549667R93, 188842A1, 549667R92, 84336125. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 104583, Ref: 188842A1) $270.00
Steering Arm Assembly - For International / Farmall tractor models Hydro 84, 258, 268, 278, 385, 454, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 67499C91, (Item #: 158746) $740.00
Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $40.00
Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.40
Tie Rod Clamp - Used on Farmall / IH models, this tie rod clamp fits 574, AV, AV1, A1, CUB, SUPER A, 100, 130, 140, 200, 230, 240, 2400, 248, 2500, 2504, 258, 3230, 340, 385, 404, 4210, 4230, 4240, 454, 474, 484, 485, 504, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 995 (Item #: 104368, Ref: 43747D) $17.50

Wheels
Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 703929R1. (Item #: 184824, Ref: 350719KIT) $23.00
Universal Parts and Accessories Category: Accessories / Supplies

Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.60
Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $16.90
Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.30
Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.80
Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80
Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.10
Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $29.70
Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $35.60
Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.50
Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80
Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.80
Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $13.80
Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.30
Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.10
Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.10
Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.40
Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $13.80
Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $24.80
International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.20
International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.10
International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.10
International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.40
International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $13.60
International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.20
International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.00

Electrical System
NOTE Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.	NOTE
No Picture Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20
No Picture Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30
Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70
No Picture Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30
NOTE Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!	NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70
Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70
Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50

Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00
Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50
Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges
No Picture Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00
No Picture Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40
Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar
Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $373.00
Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87
Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $444.00
Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $444.00
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System
Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50
Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60
No Picture Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00
No Picture Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00
No Picture Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48
No Picture Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54
No Picture Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00
No Picture Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61
Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00
No Picture Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights
Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $42.20
Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $40.80
Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70
No Picture Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $40.00
No Picture Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00
Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00
Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00
No Picture Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40
No Picture Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40
No Picture Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00
No Picture Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20
No Picture Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00
No Picture Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30
No Picture Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00
No Picture Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50
No Picture Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70
No Picture Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00
No Picture Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90
No Picture Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $57.00
No Picture Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30
No Picture Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40
No Picture Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00
No Picture Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30
No Picture Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.10
No Picture Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00
No Picture Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00
No Picture Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.40
No Picture Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00
No Picture Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70
No Picture Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80
No Picture Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00
No Picture Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30
No Picture Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98
No Picture Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80
No Picture Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $13.98
No Picture Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.80
No Picture Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67
No Picture Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39
No Picture Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90