International Harvester / Farmall 2544 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Brakes
Brake Actuating Spring - Used with disc brakes. For tractor models H, HV, Super C, Super H, O4, OS4, W4, 200, 230, 240, Farmall 300, 330, 340, Farmall 350, 404, 460, 504, 544, 606, 2404, 2504, 2544, 2606, 203, 205, 315, 615. Replaces: 354627R1 (Item #: 116863, Ref: A30910) $8.10
Brake Actuator Assembly - For International / Farmall tractor models 544, 2544, Replaces International OEM number 404919R91, (Item #: 105439) $246.00
Brake Disc - Bonded - For International / Farmall tractor models 544, 2544, Replaces International OEM number 1975462C3, 404918R1, Internal Splines: 10, Outer Diameter: 6.000", Inner Diameter: 1.838", (Item #: 105458) $31.60
No Picture Brake Operating Rod and Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 330, 340 (Farmall and International), 460 (Farmall and International), 504 (Farmall and International), 544 (Farmall and International), 606 (gas), 656 (Farmall and International), 664, 666 (gear drive), 686 (gear drive), 2504, 2544 (diesel), 2606 (diesel), 2656 (diesel), Replaces International OEM number 403840R2, 368297R1, 403840R1, 368297R11, 388271R1, (Item #: 111363) $116.00
Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $13.20
Brake Pedal Return Spring - Used with band brakes. For tractor models (2544, 544 clutch pedal return), H, HV, M, MD, MDV, MV. 8-1/8 inch overall length. (Item #: 125749, Ref: 48599DA) $9.00
Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00
Disc Brake Boot - For tractor models 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 70, Hydro 86, 2544, 2606, 2656. (Item #: 112346, Ref: 368299R1) $9.30

Clutch
Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $7.30
No Picture Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-3/4 inch 16 spline, 13/16 inch pilot. For tractor models 300, 330, 340, 350, 504, 544, 606, 656, 2500, 2504, 2544, 2606, 2656, (3444 with dial 9 inch, 11 inch discs). (Item #: 122257, Ref: S.70921) $27.00
No Picture Clutch Alignment Tool - 1-1/8"x10 and 1-11/16"x16 Spline, .787" Pilot - For International / Farmall tractor models 300, 330, 340, 350, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, 3616, Pilot Diameter: .787", 1st Spline: 1-1/8", 10 Spline, 2nd Spline: 1-11/16", 16 Spline, (Item #: 176767) $44.60
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $27.00
Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $18.50
Clutch Bearing Seal Kit - For International / Farmall tractor models 300, 350, 460, 544, 606, 656, 664, 666, 686, 2544, 2606, 2656, Contents: 1-832375 Release Bearing, 1-836304 Pilot Bearing, 1-363514 IPTO Seals, 1-2385243 IPTO Bearing Cage O-Ring and 252556 IPTO Bearing Cage O-Ring, (Item #: 108786) $81.00
Clutch Disc - 10-1/2 inch diameter, 1-1/8 inch hub, 10 spline. For tractor models 300, 330, 340, 350, 460, 504, 655, 606, 2500, 2504, 2544, 2606, 3616, 8000. (Item #: 166104, Ref: 384633R91) $189.00
Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $128.00
Clutch Disc - For International / Farmall tractor models 504 (Farmall Gas or Diesel, /60-12/68), 504 (Gas or Diesel, /60-12/68), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 560 (Farmall Gas or Diesel, 1/58-12/63), 560 (Gas or Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 660 (Gas or Diesel, 1/59-12/63), 664 (Diesel, 1/72-12/73), 666 (Gear Drive, 1/72-12/72), 686 (Gear Drive, 1/69-12/71), 2504, 2544 (Diesel), 2606 (Diesel, 1/61-12/67), 2656 (1/63-12/71), Replaces International OEM number 375701, 1-1/2", 6 Spline, (Item #: 166109) $122.00
Clutch Disc, Organic - New, 10.5 inch, spring loaded, 1.125 inch spline diameter, 10 splines. For tractor models 2500, 2504, 2544, 2606, Farmall 300, 330, 340, Farmall 350, (3616 diesel serial number up to 2117 or gas up to serial number 1945), 460, 504, 544, 606. (Item #: 156475, Ref: 360488R92) $99.30
Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00
Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2404, 2544, 2606, 3616, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 384633R91, 384633R91R, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 205053) $175.50
Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, 3616, Replaces International OEM number 384633R91, 384633R91R, H384633, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 205990) $95.00
Clutch Kit - For International / Farmall tractor models 300, 330, 340, 350, 460, 554, 606, 2504, 2544, 3616, Replaces International OEM number 360488R92, 360746R1, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Hub Diameter: 1-11/16", Pressure Plate Splines: 16, (Item #: 156480) $300.00
Clutch Kit, 10-1/2 Inch - This remanufactured single stage clutch kit includes a 10 1/2 inch, 9 spring, 16 spline, 1 11/16 inch hub remanufactured pressure plate assembly, a 10 1/8 inch, 10 spline, 1 1/8 inch hub, 4 pad remanufactured clutch disc; new release bearing and two new pilot bearings. For tractors: 300, 320, 330, 340, 350, 460, 504, 544, 606. Industrial: 2500, 2504, 2544, 2606, 3616 (gas to serial number 1945 and diesels to serial number 2117). (Item #: 202008, Ref: 360746NC) $329.60
Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00
Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01
Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50
Pressure Plate Assembly, Remanufactured, 360746-R - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, Compatible with International Construction and industrial models 3616, Replaces International OEM number 360746-R, 376360R1, 376360R94, 376360R94R, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, (Item #: 204409) $112.00
Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01
Pressure Plate, Remanufactured - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2500, 2504, 2544, 2606, 3514, 3616, 8000, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206066) $122.01
PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $62.00
T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.10

Cooling System
Fan, 6 Blade - 20.940 inch diameter, 1.250 inch pilot hole, 1.945 inch center to center on mounting bolt. For tractor models (2544, 544 diesel/gear drive), (2656 diesel), (Farmall 2706, 706 serial number 19250 and up, IH serial number 3000 and up), (544 gas/syncromesh trans), (656, 664 diesel). (Item #: 107023, Ref: A173726) $212.00
Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $21.00
Radiator, Premium Used - For International tractor models Hydro 70, Hydro 86, 544, 666 (s/n 10552-later), 686, 706 (s/n 37237-later), 756, 766, 2544, 2756 (all Gas), Replaces International OEM number 65426C1, 396351R1, 403649R1, Our premium used radiators have been cleaned, inspected, and pressure checked, For a new version of this item use Item #: 101717, Additional Handling and Oversize Fees Apply To This Item, (Item #: 300304) $327.01
Water Pump - New Water Pump with gasket. Fits; 2544 with D239 Engine, 4230, 4240, 544 with German Diesel, 884, 885, 895, 995. 8 Fins on Impeller. Replaces; VPE1021, 3132739R93, 3132739R93-R, 3132739R94, 3136053, 3136053R92, 3132739R94, 3136053R91, 735102C91, 3136053R93. (Item #: 102183, Ref: 3132739R92) $69.00
Water Pump - Does not come with rubber mounting seal or back plate. For tractor models 2544, 3400A, 3414, 3500A, 3514, 4500A, 4500B, 454, 464, 544, 574, 674. All with either C157, C175 or C200 engines. (Item #: 110070, Ref: 400677R92) $112.00
Water Pump Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2500A, 2500B, 2544, 8000 (LIFT TRUCK), Replaces International OEM number 397968R2, (Item #: 154674) $2.00
Water Pump, Remanufactured, 400677R92, 397965R2 - For International / Farmall tractor models 454, 464, 544, 574, 674, 2544, 3514, Compatible with International Construction and industrial models 260, 2400A, 2400B, 2500A, 3400A, 3500A, 4500, Replaces International OEM number 400677R92, 397965, Replaces International Casting number 397965R2, Engine: C157, C175, C200, Includes pump to backplate gasket, Includes backplate to block gasket, Includes bypass seal, With hub, Without backplate, (Item #: 205223) $117.01

Decals and Emblems
Front Emblem - Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86. (Item #: 108481, Ref: 2751846R1) $19.10
Front Emblem - Plastic "IH" red, black and white, 3-7/8 inch x 3-1/2 inch. Center to center measurement on the mounting posts is 2-17/32 inch. For tractor models 544, 656, 664, 706, 2544, 2656, 2706, 4100, 4156, 4166, 4186, 4366, 4386. (Item #: 107904, Ref: 2751848R1) $19.80
Hood Ornament, Chrome - For tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544. (Item #: 108483, Ref: 369180R1) $76.00
Hood Ornament, Used - For International tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2826, Replaces International OEM number 369180R1, Chrome finish, For a new version of this item use Item #: 108483, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435392) $43.20
International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.60

Drive Train
1st And Reverse Slider Gear - This 1st and Reverse Slider Gear has 14 splines and 57 teeth. It is used on 2544, 2656, 544, 656, 664, 666, 686 and replaces original part number 388165R1. (Item #: 111280, Ref: 388165R1) $180.00
4th Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388151R1, Teeth: 44, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430779) $263.01
Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $16.10
Gear Shift, Torque Amplifier, Forward, Reverse Knob - For tractor models 544, 656, 664, 666, 686, 2544, 2656, 2826, 3488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 826, 966, 1026, 1066. (Item #: 111042, Ref: 388180R2) $14.70
PTO Shaft 540 RPM - For International / Farmall tractor models Hydro 70, Hydro 86, 544 (w/ Independent Live PTO), 656 (w/ Independent Live PTO), 664 (w/ Independent Live PTO), 666, 686, 2544 (w/ Independent Live PTO), 2656 (w/ Independent Live PTO), Replaces International OEM number 389132R2, 71260C1, 389132C1, Tooth Front Splines: 17, Length: 11.963", (Item #: 128493) $240.00
Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01
Shift Fork, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388172R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441395) $117.01
Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $316.00
Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $45.20
No Picture Transmission Shift Handle Housing, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388181R2, Replaces International Casting nos 388181R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445760) $278.01

Electrical System
Alternator - Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100. (Item #: 113606, Ref: 1100883) $120.00
Alternator - 12 volt, 55 amp. For tractor models (856D 1967 to 1971 with 407 diesel), (1026D, Hydro 1026D 1970 to 1971 with 407 diesel), (1206D 1965 to 1967 with 361 diesel), (1256D 1967 to 1969 with 407 diesel), (1456D 1969 to 1971 with 407 diesel), (444 1967 to 1971 with 153 gas), (454 1970 to 1971 with 157 gas), (454D 1970 to 1973 with 179 diesel), (544 1968 to 1973 with 200 gas), (544D 1968 to 1973 with 239 diesel), (574 1970-72 with 200 gas), (574D 1970-72 with 239 diesel), (606 1965 to 1967 with 221 gas/LPG), (606D 1965 to 1967 with 236 diesel), (2444 1968 to 1970 with 153 gas), (2444D 1968 to 1970 with 154 diesel), (2544 1969 to 1970 with 200 gas), (2544D 1969 to 1970 with 239 diesel), (2656 1971 to 1972 with 263 gas/LPG), (2656D 1971 to 1972 with 268 diesel), (2756 1967 to 1971 with 291 gas/ 310 diesel), (2806 1965 to 1967 with 301 gas), (2806D 1965 to 1967 with 361 diesel), (2826 1970 to 1971 with 301 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720, 1100771. (Item #: 113606, Ref: ADR0231) $120.00
Battery Cover - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, 2656, Replaces International OEM number 388219R1, 538585R2, 538585R1, Does not fit utility models, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 104019) $77.00
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.20
Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $10.90
Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $28.60
Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $29.00
No Picture Starter - Delco Style DD (3934), Remanufactured, Delco Remy, 1113198, 400121R92 - For International / Farmall tractor models 544 (with D239), 656 (with D282), 666 (with D312), 2544 (with D239), 2656 (with D282), Replaces International OEM number 400121R92, Replaces Delco Remy manufacturer number 1113198, 1113187, Replaces manufacturer number 3934, 141-112, 141-112B, 91-01-4033, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 12, (Item #: 203416) $515.00
No Picture Starter - Delco Style DD (4236) - For International / Farmall tractor models 504, 544, 656, 666, 686, 2544, 2656, Compatible with International Combine (s) 151, 181, 615, 715, 815, 915, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 396523R92, 396523R93, 396556R92, Replaces Case OEM number 104193A1, 396522R91, A485615Z, Replaces Delco Remy manufacturer number 1108343, 1108344, 1109360, 323-635, 1998283, Replaces manufacturer number 4236, 140-746, 140-746A, 91-01-4181, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For gas applications, For a Remanufactured version of this sku use Item #: 203453, (Item #: 160374) $326.57
Starter Drive - Starter drive, services Delco starters: 1107854, 1108343, 1108691, 1109360, 1108334, 1108344, 1109252, 1113201. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 966, 1066, 1466, 1468, 2504, 2656, 2706, 2756, 282 For 100, 1066, 1466, 1468, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 86, 966, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 110771, Ref: 1877347) $22.90
Starter Drive - Starter drive, services Delco starter: 1113198. Tractors: 544, 656, 664, 666, 2544, 2656. 12 teeth. For 2544, 2656, 544, 656, 664, 666 (Item #: 179267, Ref: 1965788) $46.00
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
No Picture Starter, Rebuilt - A rebuilt Delco start that is 12 volts, counter clockwise rotation and has a 10 tooth starter drive for (544, 2544, 656, 2656, all Gas with ST, 1967 to 1973), (3514, 3616 Gas 1967 to 1973), (504, 3514 Gas 1969 to 1974), (C-200, 263 Gas 1968 to 1970), (3514 with C-173 Engine with ST 1969 to 1970), (915 Gas Combines 1969 to 1974), (666 with ST 1972 to 1974), (F-686 AG Tractor 1977 to 1979), (706 Gas 1967 to 1968), (766 Gas 1967 to 1968). REBUILT Starter. 12 Volt). Replaces 1108343. (Item #: 203453, Ref: TS-1230) $359.57
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.00

Engine Bearings
No Picture IPTO Bearing Cage O-Ring - For International / Farmall tractor models 330, 340, 460, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 252556, (Item #: 176724) $7.10
Main Bearings - .010" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106603, (Item #: 106601) $98.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106603, (Item #: 106602) $143.00
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106602, (Item #: 106603) $70.98
No Picture Main Bearing Set, .010 - For tractor models 474, 584, 585. (D206 CID Diesel 4-cylinder engine. Cupped head piston) and models: 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 106608, Ref: MBK239D-010) $65.00
No Picture Main Bearing Set, .020 - For tractor models 474, 584, 585. (D206 CID Diesel 4-cylinder engine. Cupped head piston) and models: 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 106609, Ref: MBK239D-020) $154.00
No Picture Main Bearing Set, Std - For tractor models 474, 584, 585. (D206 CID Diesel 4-cylinder engine. Cupped head piston) and models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 106607, Ref: MBK239D) $67.00
Main Bearings - Standard - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106603, (Item #: 106600) $147.00
Pilot Relief Valve, Used - For International tractor models 544, 656, 664, 666, 686, 756, 2544, 2656, 2756, 2826, Replaces International OEM nos 389033R93, 1600 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431146) $89.01
No Picture PTO Shaft Seal - For International / Farmall tractor models 544, 656, 664, 666, 686, 706, 756, 766, 786, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (prior to s/n 25999), 2544, 2656, 2756, 2826, 3088, 3288, 3388, 3688, 6388, 21206, 21256, 21456, Replaces International OEM number 381480R1, 472258, 634036, CR13569, (Item #: 111619) $6.40
Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $7.00

Engine Gaskets
Conversion Gasket Set - Lower - For International / Farmall tractor models Hydro 84, 544, 574 (Engine s/n D103203-later), 584 (Engine s/n D319017), 585, 624, 654, 664, 674, 684 (Engine s/n D475097), 685 (Engine s/n D679081-later), 784, 884 (Engine s/n D052919-later), 885, 2500 (Engine s/n D103203-later), 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7, TD7 (E, Engine s/n 53692-later), TD8 (C), TD8 (E, Engine s/n 5988-later), 100, 100 (E, Engine s/n 53692-later), 125, 125 (C), 125 (E, Engine s/n 5988-later), 250A (Gear Drive, Engine s/n 640235-later), 260A (Engine s/n 706836-later), 270A, Compatible with International Engine (s) D206, D239, D246, D268, DT268, Compatible with International Hay Cutting (s) 275, 375, 4000 (Engine s/n D021186), 5000 (Engine s/n D021186), 5500 (Engine s/n D021186), Replaces International OEM number 1967011C1, 3136813R99, 3228431R92, Replaces McCormick OEM number 3228431R92, Contains all gaskets necessary to complete an overhaul that are not included in head set, (Item #: 106727) $63.00
Front Crank Seal - Diesel - Front seal package contains seal and wear ring. For tractor models with diesel engines: 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 162141, Ref: 3228133R93) $60.00
No Picture Gasket Set - Complete Gasket Set For tractor models 474, 584, 585. (D206 CID Diesel 4-cylinder engine. Cupped head piston.)and Models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston.) (Item #: 181735, Ref: GK4239D) $330.00
No Picture Lower Gasket Set, Diesel - For tractor models 2544, 474, 544, 574, 584, 585, 664, 674, 684. All with 239 diesel engines. (Item #: CS4239D) $230.94
No Picture Oil Pan Gasket Diesel - OIL PAN GASKET For 2544, 474, 544, 574, 584, 585, 664, 674, 684 all with 239 diesel. (Item #: 106705, Ref: 3055161R3) $15.50
Push Rod Cover Gasket - This Push Rod Cover Gasket is used on C157, C175 and C200 Engines. Used on 2400A, 2400B, 2405B, 2412B, 2410B, 3500A, 2505B, 574, 544, 2500B, 2500A, 2544, 2510B, 2514B, 674, 3514, 3400A, 464, 375. Replaces 398040R2, 398040R3 (Item #: 184154, Ref: 398040R2) $18.80
Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $22.20

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - For tractor models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130527, Ref: BEKH239D-LCB) $623.00
No Picture Basic In-Frame Engine Kit - For tractor models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189676, Ref: BIFH239D) $870.00
Engine Rebuild Kit - Less Bearings - .020" Oversize Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Standard Bore: 3.8125", Stroke: 4.390", Kit includes: .020" Oversize Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, (Item #: 131093) $557.00
Engine Rebuild Kit - Less Bearings - .030" Oversize Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Standard Bore: 3.8125", Stroke: 4.390", Kit includes: .030" Oversize Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, (Item #: 131094) $574.00
No Picture Engine Rebuild Kit - Less Bearings - Standard Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Bore: 3.8125", Stroke: 4.390", Kit includes: Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130602) $557.00
No Picture Rebore Kit - .020 Oversize. For tractor models 544, 574, 674 with C200 Gas Engine. (Item #: R4862) $358.80
No Picture Valve Overhaul Kit - For tractor models 474, 584, 585, 544, 574, 664, 674, 684, 2544 (4 cylinder Diesel D206, D239 CID). Kit includes valves, valve springs, valve keys, valve guides. (Item #: 184184, Ref: VOKH239) $722.00

Engine Parts
1st and Reverse Sliding Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 388165R1, Teeth: 57, Splines: 14, For a new version of this item use Item #: 111280, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411280) $77.01
3rd Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388150R1, Teeth: 37, Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409376) $153.01
Bull Pinion and Brake Shaft, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388285R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441505) $245.01
No Picture Camshaft Bearing Set - For International / Farmall tractor models Hydro 84, 544, 574, 584, 585, 624, 654, 664, 674, 684, 685, 784, 844, 884, 885, 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7 (E), TD8 (E), TD8 (C), 100 (E), 100, 125 (E), 125 (C), 125, 250A, 260A, 270A, 584, 2500B, 2505B, 2510B, Compatible with International Engine (s) D206, D239, D246, D268, D358, Compatible with International Hay Cutting (s) 275, 375, 4000, 5000, 5500, 5 journal camshaft, finished I.D., (Item #: 186179) $104.00
Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01
Clutch Shaft Coupler - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, For applications with mechanical TA, Coupler Does Not Include Part 364411R1 Snap Ring, (Item #: 113408) $59.00
Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01
Countershaft Drive Gear, 3rd Speed, Used - For International tractor models 504, 544, 606, 2504, 2544, 2606, Replaces International OEM nos 374288R2, 3rd Speed, Teeth: 38, Splines: 17, Inside Diameter: 2.248", Outside Diameter: 5.705", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436754) $111.01
Drive Shaft Coupling, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, Splines: 14, For a new version of this item use Item #: 113408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435618) $31.01
No Picture Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.10
Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90
Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40
Ring Gear, Flywheel - This Flywheel Ring Gear measures 12.332 Inch Inside Diameter, 13.560 Inch Outside Diameter, Has 134 Teeth and is .485 Inches wide. Fits International Tractors; 300 diesel, 330 diesel, 340 diesel, 350 diesel, 424 gas, 444, 460, (504 diesel serial number 13675 and earlier, gas serial number 29632 and earlier), 544 with Synchromesh Transmission, 606 gas, 656, 666, 686, 2424, 2444, 2544 with Synchromesh Transmission, 2606, 3514 engine serial number 29632 and earlier. Also fits Construction and Industrials; T340, 4000. Replaces 367042R1 (Item #: 121882, Ref: 367042R1) $61.00
Second Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388149R1, Teeth: 33, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496798) $204.01
Set Of Three Sungears - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, (Item #: 113409) $156.00
TA Clutch Carrier, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359895R3, For a new version of this item use Item #: 165256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441430) $45.01
Torque Amplifier Carrier - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces Case IH OEM number 359895R3, Teeth: 27, Flywheel Step: .900", (Item #: 165256) $167.00
Torque Amplifier Drive Shaft, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 360676R51, Splines: 10/ 14, Diameter: 1.128", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436810) $231.01
Valve, Exhaust - Exhaust valve, 4 required. For tractor models 474, 584, 585. (206 CID Diesel 4-cylinder engine. Cupped head piston) and models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 128731, Ref: 3055056R2) $12.98
Valve Guide - For tractor models 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 172721, Ref: 3055022R2) $0.98
Valve, Intake - Intake Valves sold each. Please verify the number of valves needed for your engine. Some engines require 3, 4 or 6 Intake Valves. For tractor models 474, 584, 585. (206 CID Diesel 4-cylinder engine. Cupped head piston) and Models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 128730, Ref: 3055055R2) $14.00
Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $58.00
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 2544, 474, 544, 574, 584, 585, 664, 674, 684. Contains: springs, guides, locks, (no valves). (Item #: VSKH239) $258.67
No Picture Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.70
Valve Spring, Diesel - VALVE SPRING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, (706, 756, 786, 826, 886, HYDRO 86 all with D310 Diesel). (Item #: 173505, Ref: 3055060R1) $7.10

Engine Pistons and Sleeves
Piston Pin Bushing - PIN BUSHING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 128516, Ref: 3132018R2) $6.10
No Picture Sleeve and Piston Kit - For tractor models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 3-7/8 inch standard bore. (Item #: PK239D) $645.26
Sleeve Orings, Pair - Used with D179 CID Engine on: 454, 464, 484. Used with D206 CID Engine 474, 584, 585. Used with D239 CID Engine on: 2544, 544, 574, 664, 674, 684, 685, 724, 824. Used with D310 CID Engine on 2706, 2756, HYDRO 86, 686, 706, 756. Used with D358 CID Engine on: 2826, (3088 below serial number 121247), (3288 below serial number 111090), 786, 826. Inside Diameter: 4.331 inch (110.00 MM). Thickness 0.197 inch (5.00 MM) Replaces 3228344R1, 3055021R2, 3218603R1. (Item #: 179427, Ref: SRK724) $5.30

Engine Rings
No Picture Piston Ring Set - .030" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .030” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, For - .030" Oversize - Single Piston Ring Set use Item #: 120863, (Item #: 174308) $154.00
Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .030” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .030" Oversize - 6 Cylinder Piston Ring Set use Item #: 120865, (Item #: 120863) $29.90
No Picture Piston Ring Set - .040" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .040” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, For .040" Oversize - Single Cylinder Piston Rings use Item #: 120864, (Item #: 174310) $236.00
Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .040” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .040" Oversize - 6 Cylinder Piston Ring Set use Item #: 120865, (Item #: 120864) $45.90
No Picture Piston Ring Set - .060" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .060” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, Piston Ring Set - .060" Oversize - Single Cylinder use Item #: 120865, (Item #: 174312) $139.00
Piston Ring Set - .060" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .060” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .060" Oversize - 6 Cylinder use Item #: 120864, (Item #: 120865) $27.10
No Picture Piston Ring Set, Single Cylinder - Piston Ring Set. Keystone top ring. For 2544, 544, 574, 664, 674, 684 all with 239 CID 4 cylinder diesel, standard bore 3 7/8 inches. Contains 1 x 1/8 inch, 1 x 3/32 inch, 1 x 3/16 inch. Replaces 30-3090264, 3139594R91, G907224, G-907-224, 674309C92, 303090264. (Item #: 108178, Ref: PRS239D) $34.00
No Picture Piston Ring Set - Standard - 4 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, Bore: 3.8125", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold 4 Cylinder set, For Piston Ring Set - Standard - Single Cylinder use Item #: 120866, (Item #: 174306) $103.00

Exhaust System
Exhaust Manifold - For International / Farmall tractor models 544, 553, 644, 654, 664, 724, 744, 824, 844, 2544, Replaces International OEM number 3058003R1, 3058003R11, 3058003R12, For D239 Engine, 2 Bolt Flange, (Item #: 111519) $105.00
Exhaust Pipe - For tractor models 2544, 2656, 460, 544, 560, 656, 660. (Item #: 126744, Ref: 369613R1) $31.20
Muffler - Vertical muffler for gas and diesel tractor, fits engines C200, 221, C263, D166, D188, D236, D239, D282. Inlet inside diameter 1-7/8 inch, outlet outside diameter 1-7/8 inch length 22-1/2 inches, diameter 4-1/2 inches, round body. For tractor models 544, 2544, 460, 606, 2606, 560, 656, 660, 2656, 340 For 2504, 2544, 2606, 2656, 340, 460, 504, 544, 560, 606, 656, 660, 664. (Item #: 100806, Ref: 371039R91) $60.00

Fuel System / Air Intake
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: M, MD, WR9S, Super WD9, 400, 450, W400, W450, 460, 504, 544 diesel, 455 diesel, 2544 diesel, 5606, Gas powered combines: 403 and 453 Hillside, 503, 615, 715. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Item #: 157279, Ref: R28794) $7.80
No Picture Air Cleaner Intake Hose, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 2544, 2706, 2756, 2806, 2826, 2856, Replaces International OEM nos 380035R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443222) $39.01
Cable - Choke - For International / Farmall tractor models 460, 544, 606, 2544, 2606, Replaces International OEM number 369689R93, Length: 48-1/2", (Item #: 161898) $23.70
Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Farmall / International it fits: [ 2404, 2424, 2444, 2504, 2544, 2656, 330, 340, 404, 424, 444, 454, 464, 504, 544, 574, 656, 666, 674, 686 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ], [ 2826, 664, 826 (For diesel fuel shut off cable bracket) ], [ Industrial: 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3514, 4500A, 4500B, 8000 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ]; Replaces: 373373R1, 29-81, B110-10 (Item #: 126116, Ref: CT29-81) $5.10
Cable - Fuel Stop / Shutoff - For International / Farmall tractor models 544 (diesel, s/n 14272-earlier), 664 (diesel), 2544 (diesel, s/n 14272-earlier), Replaces International OEM number 530762R2, Length: 47-1/2", (Item #: 161930) $29.60
Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carbs used on: 464, 504, 544, 656, 574, 666, replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, 934SL, 974SL, TSX984SL. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA, 1 year warranty. (Item #: 100752, Ref: 14996) $465.00
Carburetor - With reversible linkage. This Zenith Style Carburetor outperforms the original carbs. Replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, TSX934SL, TSX974SL, TSX984SL. International part numbers 381945R93, 396737R93, 396738R92, 396966R91, 398069R91, 398069R92, 399355R93, 400348R91, 401379R91, 404731R91, 405530R91, 405869R94, 535134R91, 535135R91 Center to center on the 2 mounting bolts is 2 11/16 inches. 1 year warranty. (Item #: 183805, Ref: 14996B) $310.00
Carburetor Kit, Basic - Kit for Zenith 12758, 12685, 13384, 13396, 13588, 13716 carbs on 2504, 2544, 3514, 504, 544, 574, 666, 674, 686. (Item #: 100741, Ref: Z104) $23.60
Carburetor Kit, Basic - Kit for Marvel TSX934, TSX959, TSX857, TSX927, TSX974, TSX975 carbs used on 2544, 3514, 504, 544, 574, 656, 666, 674, 686. (Item #: 100734, Ref: MS102) $15.30
Carburetor Kit, Basic - Kit for IHC 406804R91, 361525R92, 363741R93, 367258R92, 380956R96, 381984R95, 386424R96, 388297R94, 372723R92, 379813R95, 396197R93, 539575R91, 388425R96, 533622R91, 358065R91, 358554R91, 356948R92, 357231R92 carbs on 2544, 300, 350, 460, 544, 560, 656, 660, 706, 756, 766, 806, Super H, Super M, Super W-4. (Item #: 100731, Ref: IH103) $15.60
Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is for Marvel-Schebler carburetor number TSX934. The kit contains all the parts shown. (Item #: 185007, Ref: R7891) $63.00
No Picture Complete Carburetor Kit - For International / Farmall tractor models 544, 656, 2544, For International Carburetor number 388296R92, 388297R94, 406803R91, 406804R91, Kit includes: basic carburetor kit, fuel and air adjustment screws, jets, and gaskets, (Item #: 178513) $57.00
Fuel Injector Nozzle Sleeve - This Fuel Injector Nozzle Sleeve is used on D155, D179, D206, D239, D246, D268, DT268, D310, and D358 Engines. Brass Construction, 3.190 inch overall length 0.386 inch injector tip inside diameter. Replaces 73055344, 3055344R1 (Item #: 165847, Ref: 3055344R1) $33.00
Fuel Sending Unit - With Seal. For GAS tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. NOT COMPATIBLE WITH ETHANOL BLENDS. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94) $45.00
Fuel Sending Unit - For International / Farmall tractor models 504, 544, 606, 644, 656, 2504, 2544, 2606, 2656, Replaces International OEM number 377103R91, 377104R91, (Item #: 115678) $60.00
Fuel Solenoid - For International / Farmall tractor models Hydro 70, Hydro 86, 350, 444, 454, 464, 504, 544, 574, 666, 674, 686, 2400A, 2504, 2544, Compatible with International Construction and industrial models 2400A, 2504, 3400A, 3500A, 3514, Compatible with International Engine (s) C153, C175, C200, C291, Replaces International OEM number 386015R91, 396739R91, 396739R92, 396739R93, 530184R1, 71358C2, 71358C91, 71358C92., For Marvel Schebler carburetors only, not for International carburetors, (Item #: 111797) $175.00
Injector Nozzle - For tractor models 454, (464 up to serial number 027205 with nozzle number DLLA150S417), 544, 560, 574, 656, 660, 664, 674, 706, 786, 826, (886 serial number 14472 and up), 2544, 2656, 2706, 2826. (Item #: 179950, Ref: 3055428R92) $39.30
No Picture Throttle Friction Disc - This Throttle Friction Disc measures 0.165 of an inch thick, 1.960 inches outside diameter and has a center hole of 0.530 of an inch diameter. For models 240, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, 274, 284, 340, 3444, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884 and Hydro 84. Also replaces 388632R1, 394716R1 and 399168R1. (Item #: 178163, Ref: 369463R1) $6.40
Throttle Knob - For tractor models 384, 454, 464, 544, 574, 656, 664, 666, 674, 686, 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 2400, 2500, 2544, 2656, 2756, 2826, 2856, 3110, 4366, (4386, 4568, 4786 4WD), Hydro 70, Hydro 86, Hydro 100. (Item #: 111041, Ref: 397931R2) $8.10

Gauges
Cable - Tachometer, 400727R91 - For International / Farmall tractor models 544 (Hydro), 656, 2544 (Hydro), 2656, Replaces Case IH OEM number 400727R91, Length: 42", (Item #: 161988) $35.70
No Picture Fuel Gauge with Sending Unit - For International / Farmall tractor models Hydro 100, 460, 544, 560, 656, 660, 706, 756, 766, 806, 826, 856, 966, 1026, 1055, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4568, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 5378427R1, 533992R1, 378427R92, 378427R93, 378427R94, 378426R91, For replacement sending unit use Item #: 121190, (Item #: 135041) $77.00
Fuel Sending Unit - This fuel sending unit includes a seal. For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. Compatible with Ethanol blend to 15%. 32-244 Ohm. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94EB) $45.00

Hitch / Drawbar
Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 3.437 inches long with a 1.125 inch diameter. In some applications it is used with 49139D lock plate, sold separately. Used on H serial number 39937 and above, Hydro 70, Hydro 86, Super H, 300, 350, 404, 504, 544, 606, 656, 664, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. Replaces international part number 57654D (Item #: 112537, Ref: 57654D) $16.10
Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $114.00
Front Stabilizer Eyebolt - Used with 382386R2 stabilizer control arm, this Eyebolt is used on International models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026. Replaces International OEM number 382390R1 (Item #: 108857, Ref: 382390R1) $33.00
Inner Pipe - Associate parts for this Inner Pipe are 384852R1 Pin, 389369R1 Yoke, 389370R11, Lockout pin, 400836R1 Clevis. It is used on International models Hydro 70, Hydro 86, 544 (1/1966 - 12/1973), 656 (1/1966 - 12/1973), 664 (1/1972 - 1/1973), 666 (1/1972 - 1/1973), 686 (1/1969 - 12/1971), 2544 (Diesel), 2656 (1/1963 - 12/1971). Replaces 400835R1 (Item #: 108821, Ref: 400835R1) $64.00
Lateral Limiter Clevis - Used in association with 384852R1 Pin, 389369R1 Yoke, 389370R11 Lockout pin and 400835R1 Inner pipe, this Three Point Lateral Limiter Clevis measures 7.310 inches long. It is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108851, Ref: 400836R1) $173.00
Lift Arm Crank Handle, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 100, 130, 140, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 523861R2, For a new version of this item use Item #: 108883, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408883) $5.26
Lift Arm Latch - This Lift Arm Latch is used on 2504 Indust/Const, 2544 Indust/Const, 2606 Indust/Const, 2656 Indust/Const, 504, 544, 606, 656, 664, 666, 686, Hydro 70, Hydro 86. It replaces 380993R2, 380993R1 (Item #: 111394, Ref: 380993R2) $34.20
No Picture Lower Latch Spring - Used with 393500R1 latch. Replaces OEM part number 522840RA. For tractor models 21026, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Cub, Cub Lo-Boy, Hydro 100, Hydro 70, Hydro 86, 100, 1026, 1206, 130. (Item #: 128306, Ref: 522840R2) $9.80
Lower Link Pin Retainer, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21456, Replaces International OEM nos 406687R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453564) $9.01
Lower Pull Arm Pin - Used on International models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, this part replaces 406685R1 (Item #: 112530, Ref: 406685R1) $20.30
No Picture Lower Pull Arm Pin, Used - For International tractor models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, Replaces International OEM number 406685R1, Front Pin, For a new version of this item use Item #: 112530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435596) $11.01
Pin, Front Drawbar - 1" pin diameter, 2.50" usable length, 3.120" overall length, 1.50" head dia. For tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, (4100, 4156, 4166, 4186 thid id drawbar support arm pin for these models), 2544, 2656. (Item #: 170296, Ref: 439-51644) $1.98
No Picture Rear Drawbar Support, Used - For International tractor models 544, 656, 666, 2544, 2656, Replaces International OEM nos 391101R1, For Fast Hitch Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496573) $204.01
Stabilizer Control Arm - International Tractors Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 all use this Stabilizer Control Arm on Three Point Hitches. (Item #: 127417, Ref: 389362R1) $226.00
Stabilizer Control Arm, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389362R1, For a new version of this item use Item #: 127417, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 427417) $134.01
Stabilizer Eyebolt, Rear - Used on Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, this Eyebolt replaces International part number 389371R1. (Item #: 152201, Ref: 389371R1) $33.80
Sway Limiter Lockout Pin - Part number 389370R11, Sway Lockout Pin, is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108853, Ref: 389370R11) $8.50
Sway Limiter Yoke Pin - Used on both the forward and rear yokes, this pin measures B - .621 inches in diameter, and A - 2.05 inches long. Used on Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 1026, 2544, 2656, 3088, 3288, 3488, 3688. This pin replaces part number 384852R1 (Item #: 108854, Ref: 384852R1) $3.70
Three Point Lateral Limiter Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389369R1, (Item #: 108852) $3.98
Three Point Stabilizer Front Eyebolt, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, Replaces International OEM number 382390R1, Used on Front or Rear Yokes, For a new version of this item use Item #: 108857, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408857) $17.76

Hydraulic System
Action Control Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 686, 2544, 2656, Replaces International OEM nos 389589R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430805) $176.01
Hydraulic Pump - Hydraulic Pump, 12 GPM Main Hitch Pump. Note: Pump pressure is rated at 2250 PSI, exceeding pressure may damage pump and void the warranty. Open back type, can be used with piggy-back pump. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Replaces 1949296C1, 70933C91, 373964R93. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 104233, Ref: 70933C91) $350.00
Hydraulic Pump - Pump is open back type to use with piggy-back pump, 17 GPM rating, max PSI of 2250. Not for use in 12 GPM systems. If system is 12 GPM, use 1949296C1. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Hydraulic Pump is 17 GPM. (Item #: 104237, Ref: 70935C91) $380.00
Hydraulic Pump Backplate Gasket - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 450, 460, 504, 544, 560, 606, 656, 660, 706, 786, 806, 826, 856, 886, 986, 1026, 1066, 1086, 1206, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21256, 21456, Replaces International OEM number 71265C1, 371543R1, 371543R2, For Pumps 70631C91, 70932C91, 70933C91, 70935C91, (Item #: 111636) $4.90
Hydraulic Pump, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 460, 504, 544, 560 (application), 606, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, 1026, 1456, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3488, 21026, 21456, Replaces International OEM number 70935C91, 373966R94, 1949292C1, 527755R91, For 560 application, pump must be open on back side to accomodate piggyback pump., 17 GPM, For a new version of this item use Item #: 104237, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404237) $206.01
Remote Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 404, 504, 544, 606 (s/n 6754-later), 656, 664, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, 2404, 2504, 2544, 2606 (s/n 6754-later), 2656, 2706, 2756, 2806, 2826, 2856, 4100, 21206, 21256, Replaces International OEM nos 390826R94, 390826R91, 390826R92, 390826R93, Open on 1 side only, 1500 psi to 2000 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496748) $450.01
Seal, Countershaft Driven Hydraulic Pump - This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

Lights
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.00
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Miscellaneous
Flex Plate, Remanufactured, 404043R94 - For International / Farmall tractor models 544, 656, 2544, 2656, Replaces International OEM number 404043R94, Plate Diameter - 11", Hub Diameter 1-3/16", Splines - 11, Center - Solid, (Item #: 204318) $104.01
Flex Plate, Remanufactured, 532249R91 - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 2544, 2656, Replaces International OEM number 532249R91, Plate Diameter - 11", Hub Diameter 1-3/16", Splines - 11, Center - Spring, (Item #: 204319) $81.44
Gear Shift Knob, Rubber - For International / Farmall tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 388182R1, SHAFT 0.840" HOLE, BASE 1.900" HOLE, 2 1/4" TALL, (Item #: 124171) $14.60
Hydraulic Pump Drive Gear, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 660, 2544, 2656, Replaces International OEM nos 396859R1, Teeth: 25, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430889) $117.01
Hydraulic Valve, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1026, 1066, 1456, 2544, 2656, 2756, 2826, 2856, 4156, 4166, 4186, 4366, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 383267R94, 529910R93, 383267R91, 383267R92, 383267R93, 529910R91, 529912R91, 529912R92, 529910R92, Opened on both sides, Open Center Hydraulic Sysyem, For a Remanufactured version of this part use Item #: 206999, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498240) $555.01
O-Ring, Hydraulic - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2756, 2806, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21256, Replaces International OEM number 346959R1, 511524, (Item #: 153568) $0.50
O-Ring, Hydraulic Power Steering - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 460, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 254688R1, 14472780, (Item #: 153567) $0.90
Torque Amplifier Carrier, Remanufactured, 361281R13 - For International / Farmall tractor models Super MTA, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, For a New version of this sku use Item #: 151955, (Item #: 204411) $166.91
No Picture Transmission Shift Actuating Link - For International / Farmall tractor models Hydro 70 (1/74-12/77), Hydro 86 (1/74-12/77), 544 (1/66-12/73), 656 (1/66-12/73), 664 (Diesel, 1/72-12/73), 666 (1/72-12/72), 686 (1/69-12/72), 2544 (Diesel), 2656 (1/63-12/71), Replaces International OEM number 388201R11, (Item #: 173872) $87.00

Oil System
Oil Filter Spin On - Oil filter element, spin-on type. Approc, diameter 5.37 inch height, 3.68 inch outside diameter. For gas engines: C157, C175, C200, C291. For diesel engines: D179, D209, D236, D239, D246, D310, D358. For 2544, 2706, 2756, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 826, 886, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 124840, Ref: 3136046R93) $10.10
Oil Pump - For tractor models 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 2544, 3400A, 3500A, 3514, 4500, 454, 464, 544, 574, 674 For C157, C175 and C200 Gas Engines. Replaces 398073R93 (Item #: 128684, Ref: 601-1129) $385.00
Oil Pump - International D239, D310, D358 Diesel Oil Pump (Item #: 179998, Ref: 3136434R91) $395.00

PTO / Driveline
Anti Creep Brake Piston - This Anti Creep Piston is used in multiple International models. Three are used per tractor. Sold individually. (Item #: 113402, Ref: 381464R22) $20.90
No Picture IPTO Drive Shaft Bearing Cage, Used - For International tractor models 504 (Gas and Diesel), 544, 656, 664, 666, 686, 2504, 2544, 2656, Replaces International OEM nos 388674R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441548) $176.01
IPTO Front Drive Shaft, Used - For International tractor models 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 389535R11, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441425) $135.01
PTO Bearing - This bearing measures 1.575 inches (40.005 mm) inside diameter, 3.150 inches (80.010 mm) outside diameter, and 0.709 inches (18.008 mm) wide. It replaces D83012, B18215, DANA070HD100, H437897, H4628S, H4625S, H4626S, H4627S, K3660223431, L33908, SBA326040030, P39642, ST215, 0000140211, 0040040, 1103566C91, 114085, 130029H1, 151901206, 190001311024, 190003311024, 190003313025, 192310210025, 1963034C1, 199012290707, 20915780, 2359180, 2521A415, 294714R91, 301164, 3146251R91, 325046C91, 339818X1, 340401140, 41618500, 47109308, 47110555, 47123219, S69425, 6208, 700524R91, 700526R91, 70066742, 700803429, 704772R91, 704772R92, 707805203, 713564R91, 80114085, 80301164, 81878507, 83962320, 87605894, 920096050, 9964942 (Item #: 111675, Ref: ST215) $48.98
PTO Coupler, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, Super M, Super MTA, 300, 300U, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2504, 2544, 2606, 2656, 3388 (s/n 10384-earlier), Replaces International OEM nos 360168R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430248) $49.51
PTo Disc - This PTO Clutch Disc has an inside diameter of 4 inches (102mm) with 51 teeth, outside diameter of 5 5/16 inches (135mm) Replaces 381490, 381490R4, 111357, 1277392C1, 1712-4422, 17124422, 1997688C1, 381490, 381490R3, 381490R4 (Item #: 111357, Ref: 381490R1) $6.70
PTO Drive Shaft - 51 and 12 teeth. For tractor models 1026, 1066, (1086 serial number up to 47999), 1206, 1256, 1456, (1486 serial number up to 25999), 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, (3388 serial number up to 10384), 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, (886 serial number up to 16999), 966, (986 serial number up to 23999), Hydro 100, (Hydro 186 serial number up to 11999), Hydro 70, Hydro 86. (Item #: 166964, Ref: 389529R1) $563.00
PTO Input Shaft, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3388, 21026, 21206, 21256, 21456, Replaces International OEM nos 389529R1, Spline: 12 and 51, Uses #91 Woodruff Key 1/4" X 3/4", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497525) $275.01
PTO Plate - Measures 4.070 inches inside diameter, 5.300 inches outside diameter. Replaces 381489R3, 1277392C1, 1997688C1 (Item #: 111358, Ref: 381489R3) $4.80

Seats
Seat Assembly - Black and white vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 101273, Ref: R1139) $602.87
Seat Assembly - Black vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 178440, Ref: R1140) $940.00
Seat Assembly - Black fabric on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 182099, Ref: R1141) $829.00
No Picture Seat Assembly - Red fabric on steel. For tractor models 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 100. (Item #: 180720, Ref: R1142) $890.00
Seat Back - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127287, Ref: R3662) $213.00
No Picture Seat Bottom - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 178307, Ref: R3661) $327.00
Seat Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Compatible with International Hay Cutting(s) 275, 375, Replaces International OEM nos 379321R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431196) $31.01
Seat Cushion and Backrest Set - Black and white, 3 mounting holes on backrest. For tractor models 424, 544, 656, 664, 2424, 2544, 2656. (Item #: 178470, Ref: S.67200) $157.21
No Picture Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00
Seat, Shock Absorber - For tractor models 460, 504, 544, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, 2504, 2544, 2706, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 414 Cotton Picker, 420 Cotton Picker. Replaces 372751R91, IHS646. (Item #: 105342, Ref: 400072) $56.00
No Picture Seat Upper Back - Black and white vinyl on steel with original style pleated covering. For tractor models 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 178315, Ref: R3663) $148.00
Upper Backrest Plate, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574, 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 387178R1, For a new version of this item use Item #: 109563, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409563) $21.66

Sheet Metal / Body Parts
Fender Bracket - Left Hand - For International / Farmall tractor models 504, 544, 656, 706, 756, 826, 856, 2504, 2544, 2656, 2706, 2756, 2826, 2856, Replaces International OEM number 399339R1, Fits left-hand side, Tires 34"-larger, Comes primered (color may vary). Prior to painting check fitment, For U-Bolt use Item #: 103853, Additional Handling and Oversize Fees Apply To This Item, (Item #: 103852) $118.98
No Picture Fender Bracket - Right Hand - For International / Farmall tractor models 504, 544, 656, 706, 756, 826, 856, 2504, 2544, 2656, 2706, 2756, 2826, 2856, Replaces International OEM number 399340R1, Fits right-hand side, Tires 34"-larger, Comes primered (color may vary). Prior to painting check fitment, For U-Bolt use Item #: 103852, Additional Handling and Oversize Fees Apply To This Item, (Item #: 103853) $102.87
Fender Handle Grommet - Outside diameter 5.750 inch x 2.750 inch, inside diameter 4.500 inch x 1.500 inch. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574 series A, 656, 66, 666, 674, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2500 series A, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256. Replaces 235700A1, 388940R1.235700A2 (Item #: 103959, Ref: R20759) $9.00
Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $215.00
Front Hood Access Cover - LH, RH, Used - For International tractor models 544, 656, 664, 706, 806, 2544, 2656, 2706, 2806, Replaces International OEM nos 378627R1, Fits Right Hand or Left Hand Side, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498359) $35.01
Front Weight Locking Cam - This Front Cast Weight Locking Cam has an overall length of 3-1/2 inch. Two (2) used per tractor, priced and sold individually. Fits: Hydro 100, Hydro 186, Hydro 70, Hydro 84, Hydro 86, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 274, 284, 3088, 3288, 3488, 3688, 385, 484, 5088, 5288, 544, 5488, 584, 656, 664, 666, 684, 686, 766, 784, 786, 884, 886, 966, 986; Replaces: 536044R1, 74202C1 (Item #: 152234, Ref: 536044R1) $37.30
Front Weight Locking Cam, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 385, 484, 544, 584, 656, 664, 666, 684, 686, 766, 785, 786, 884, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 74202C1, 536044R1, For front weight bracket use 152230, For front weight bracket spacer use 152232, For a new version of this item use Item #: 152234, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452234) $22.01
Grab Handle - Left Hand - For International / Farmall tractor models 544, 656, 666, 686, 2544, 2656 (all with Gear drive), Replaces International OEM number 389031R1, Fits Left Hand Side, (Item #: 121836) $49.20
Grab Handle - Right Hand - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, Replaces International OEM number 394939R1, Fits Right Hand Side, (Item #: 121837) $50.00
Rear Hood Side Panel, LH, Used - For International tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 378638R1, Left Hand, For Tractors with Side Headlights, For Right Hand use Item #: 435055, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435056) $49.01
No Picture Rear Hood Side Panel, RH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 378671R1, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434916) $55.01
Rear Hood Side Panel, RH, Used - For International tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 378639R1, Right Hand, For Tractors with Side Headlights, For Left Hand use Item #: 435056, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435055) $49.01
Step - LH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 2544, Replaces International OEM nos 399032R1, Hydrostatic Drive Tractors, Cast Iron, Mounting Bolts are Staggered, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432219) $60.01
Suitcase Weight with IH Logo, Small Handle, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 258, 268, 274, 284, 385, 433, 434, 454, 464, 474, 484, 544, 585, 633, 656, 664, 666, 674, 684, 685, 686, 733, 766, 784, 786, 826, 884, 885, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 2544, 2656, 2826, Replaces International OEM nos 383393R2, 71200C1, 100 lbs, IH Logo, Small Handle, No "L" Cutout, Curved Bottom, Color may vary, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430803) $147.01
Weight Bracket, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 385, 404, 424, 444, 464, 484, 504, 544, 560, 584, 656, 660, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 383389R21, 383389R11, Small Steel Weight Bracket, Length 23", For a new version of this item use Item #: 152230, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499315) $155.01
No Picture Weight - Suitcase, Front - For International / Farmall tractor models Hydro 84, Hydro 86, Hydro 100, Hydro 186, 274, 284, 464, 544, 666, 674, 686, 766, 786, 886, 966, 986, 1066, 1466, 1468, 1566, 1568, 1586, 2400, 2500, 2544, Replaces International OEM number 383392R2, 71199C1, Weight: 70 lbs, Comes In Red Primer, Thickness: 1-7/8", (Item #: 119701) $106.00