Engine Block Heater - Frost plug heater with cord. 1250 watt, 120 volt, 1.240 inch diameter. Fits tractors and combines with diesel engines. Cord is 72 inches long. Fits diesel engines: D312, D360, D and DT414, D and DT436, D and DT466. For 1066, 1086, 1440, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 164169, Ref: 71151C91)$91.00
Belts
Belt - Compressor Drive, Alternator - For International / Farmall tractor models Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1586, 3388, 3588, 3788, 4366, Compatible with International Combine (s) 1440, 1460, 1470, 1480 Replaces International OEM number 874097C1, , Compatible with John Deere tractor models 8850 (s/n 6060-later), Replaces John Deere OEM number R82437, Length: 39.9", Width: 1/2", Thickness: .303", Material: polyester cord, Belt type: raw edge laminate, Color: black, (Item #: 123137)$13.20
Belt - Fan - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 6388, 6588, 6788, Replaces International OEM number 532746R2, Replaces manufacturer number 22650, REC (Raw Edge Cogged) Polyester Cord, Length: 65.5", Thickness: .43", Width: 5/8", (Item #: 123134)$23.10
Brakes
No Picture
Brake Arm Replacement Pad and Screw - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number M300, Can only be used on OEM 1981317C1 brake arms that have a replaceable pad., (Item #: 176618)$19.50
Brake Disc, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, 6788, Replaces International OEM number 104712C21, Splines: 12 Internal Splines, Outer Diameter: 8.000", Inner Diameter: 1.850", For a new version of this item use Item #: 105453, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405453)$8.51
Brake Operating Lever, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM nos 384306R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447297)$40.01
No Picture
Brake Operating Rod with Clevis, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 21206, 21256, 21456, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 384307R1, For a new version of this item use Item #: 172774, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447304)$50.01
Brake Piston Inner O-Ring - For International / Farmall tractor models Hydro 186, 706, 786, 806, 986, 1086, 1206, 1256, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Compatible with International Construction and industrial models 21206, 21256, Replaces International OEM number 2385236, 3-1/4" x 3-1/2" x 1/8", (Item #: 162637)$1.60
No Picture
Brake Piston, Used - For International tractor models Hydro 186, 786, 886, 986, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 104655C1, For a new version of this item use Item #: 105433, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456891)$58.01
Brake Valve Assembly, Used - For International tractor models 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 1272218C91, Replaces Casting nos 39011-47C, 39011-21C, For Self Bleeding use Item #: 499160, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434075)$270.01
Park Lock Kit - Park lock repair kit contains 390856R1SL turnbuckle, 390857R1 left hand threaded rod, 390858R1 right hand threaded rod. Models: 766 after serial number 17047, 966 after serial number 32222, 1066 after serial number 57646, 1466 after serial number 3000, all 1566, 786, 886, 986, 1086, 1486, 1586, 3088-3788, For 1066, 1086, 1466, 1486, 1566, 1586, 3088, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 766, 786, 886, 966, 986. (Item #: 111212, Ref: 390856KIT)$41.00
Park Lock Lever Bracket, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 384055R11, 384055R12, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434899)$140.01
Transmission Brake Lever Assembly, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 21206, 21256, 21456, Replaces International OEM number 1981317C1, 384311N, 384311R11, 384311R21, M299, For a new version of this item use Item #: 111367, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411367)$44.40
Clutch Booster Cylinder, Used - For International tractor models 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 113965C93, For a Remanufactured version of this part use Item #: 206994, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 406994)$500.01
Clutch Disc - For International / Farmall tractor models 3388 (1/79-12/81), 3588 (1/79-12/81), 3788 (1/80-12/81), 6388 (1/81-12/83), 6588 (1/81-12/83), 6788 (1/81-12/83), Replaces International OEM number 142200C1, 142200C2, 5 Pad NC, (Item #: 166186)$142.00
No Picture
Clutch Disc - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, Replaces International OEM number 394239HD, 6 Pad, 1-3/16", 11 Spline, (Item #: 166267)$170.00
No Picture
Clutch Disc - For International / Farmall tractor models 1486, 3588, 6388, 6588, Replaces Case IH OEM number 142197C4, Outer Diameter: 14", Hub Size: 1-3/16", Splines: 11, Disc Type: 8 Pad, Disc Center: Spring, For a Remanufactured version of this sku use Item #: 204417, (Item #: 189689)$271.00
Clutch Kit - TRU-POWER clutch kit contains remanufactured pressure plate assembly, 14, 18 spline, 1-7/8 hub, 15 springs~ remanufactured heavy duty disc, 14, 11 spline, 1-3/16 hub, 6 large pads, new release and pilot bearings. For tractors: 3388, 3588, 63 For 100, 130, 200, 230, A, B, C, Super C, Super A (Item #: 142078K-C152)$46.26
Clutch Kit - This new single stage clutch kit contains a remanufactured pressure plate assembly, a remanufactured, 14 inch, 11 spline, 1 3/16 hub with 6 large pads clutch disc, a new release bearing and new pilot bearing. For tractor models 3388, 3588, 6388, 6588. (Item #: 142078C91)$591.44
No Picture
Clutch Kit, Remanufactured, 142184C91 - For International / Farmall tractor models 3388, 3588, 6388, 6588, Replaces International OEM number 142184C91, 142184C91R, 84354924, GC73340031, Clutch Diameter - 14", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 6 Large Pads, Pressure Plate Size - 14", Pressure Plate Levers - 3, Pressure Plate Springs - 15, Pressure Plate Hub Diameter - 1-7/8", Pressure Plate Splines - 18, Pressure Plate Type - Single Stage, Flywheel Step 2.048", For Clutch Plate use Item #: 205055, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202002)$484.10
Clutch Release Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 380110R1, For a new version of this item use Item #: 111850, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411850)$25.01
Clutch Release Shaft Kit - For International / Farmall tractor models 706, 806, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 892862M1, (Item #: 113424)$243.00
Clutch Release Sleeve, Used - For International tractor models Hydro 100, 706, 756, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380109R1, For a new version of this item use Item #: 108765, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408765)$60.60
Pressure Plate, Remanufactured, 142184C91 - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 142184C91, 142184C91R, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 15, Pressure Plate Hub: 1-7/8", Pressure Plate Spline: 18, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 205055)$252.87
PTO Clutch Kit - Clutch disc kit for independent PTO using 9 discs 381489R3 and 7 plates 381490R1. Single speed IPTO tractors: 1486 serial number 26000 and up, 1566, 1568, 1586, 3588, 3788, 6588, 6788. Dual speed tractors: Hydro 186 serial number 12000 and up, 786, 886 serial number 17000 and up, 986 serial number 24000 and up. For 1086, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 786, 886, 986, HYDRO 186, HYDRO 3488. (Item #: 110967, Ref: 68803C91)$67.00
Release Bearing - Greasable. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3688, 3788, 400, 4100, 4156, 4166, 4186, 4366, 4386, 450, 4568, 560, 6388, 6588, 660, 6788, 706, 756, 786, 806, 826, 856, 886, 966, 986, Hydro 100, W400, W450. It has an inside diameter of 2.50 inches, an outside diameter of 4.125 inches, and is .83 inches wide. Please verify measurements before ordering. (Item #: 107274, Ref: 365867R91)$23.60
Cooling System
Cooling Fan - 6 Blade, Used - For International tractor models Hydro 186, 1566, 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 69682C2, 69682C3, Blades: 6, Outside Diameter: 23", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431152)$85.01
Oil Cooler Mount Gasket - For International / Farmall tractor models 666, 686, 766, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 675513C1, (Item #: 156020)$9.90
Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91)$6.20
Ball Bearing - Constant Mesh and Torque Amplifier Drive Gear - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number ST3025, ST697, ST3024, ST3011, 80420C91, 80419C91, 15 Balls and Retainer, Inside Diameter: 75 mm, Outside Diameter: 130 mm, Width: 22 mm, This bearing is splash lubricated, Make sure sump has an adequate level of oil, (Item #: 168435)$47.00
Bull Pinion And Brake Shaft, Used - For International tractor models 786, 886, 986, 1086, 3088, 3288, 3388, 3588, 3688 (Hi-Clear), 6388, 6588, Replaces International OEM nos 104660C1, 104701C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497185)$280.01
Cam Pivot Lever, Used - For International tractor models 786, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, Replaces International OEM number 104269C1, For a new version of this item use Item #: 172684, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447303)$30.00
Hi Lo Shift Fork, Used - For International tractor models Hydro 100, Hydro 186, 756, 766, 786, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2756, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, 21256, 21456, Replaces International OEM number 398279R2, 398279R1, Replaces Casting nos 64732C1, For a new version of this item use Item #: 168643, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497972)$44.01
Hi/Lo Shift Kit - Hi/Lo Shifter Repair Kit contains, 71526C1SP shaft, 71531C1SP bar. Tractors: 766 after serial number 17047, 966 after serial number 32222, 1066 after serial number 57646, 1466 after serial number 30001 all 1566, 786, 886, 986, 1086, 1486, 1586, 3088 thru 3788, 6388 thru 6788. For 1066, 1086, 1466, 1486, 1566, 1586, 3088, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 766, 786, 886, 966, 986. (Item #: 164468, Ref: 71526KIT)$112.00
Hi-Low Shift Lever Bar - For International / Farmall tractor models 786, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 120261C1, Range Transmission, (Item #: 173600)$22.40
Idler Gear, Used - For International tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 134457C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498102)$195.01
International, 120261C1, Used - For International tractor models 786, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 120261C1, For a new version of this item use Item #: 173600, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453563)$12.01
Knob, Gear Shift, Torque Amplifier, Transmission - For tractor models 756, 766, 826, 856, (886 up to serial number 16999), 966, (986 up to serial number 23999), 1066, (1086 up to serial number 47999), 1256, 1456, 1466, 1468, (1486 up to serial number 25999), 1566, 1568, (1586 up to serial number 20999), (3388 up to serial number 10384), (3588 up to serial number 12729), (4386 serial number 2501 and up), 4568, 4586. (Item #: 126527, Ref: 397978R2)$18.30
PTO Drive Gear Kit - For International / Farmall tractor models 1586 (All TA Tractors), 3388 (All TA Tractors), 3588 (All TA Tractors), 3788 (All TA Tractors), 6388 (All TA Tractors), 6588 (All TA Tractors), 6788 (All TA Tractors), Replaces International OEM number 104401C1, 535209, 67790, 127513, 22414, Kit Includes: IPTO Shaft, IPTO Bearing Cage, Bearing, 3 Seals, and O-ring, (Item #: 176428)$382.00
PTO Shaft - For International / Farmall tractor models 1566, 1568, 3588, 3788, 6588, 6788, Replaces International OEM number 139256C1, 67471C1, 1000 RPM, 17 Front Splines, 15.332" Long, (Item #: 153616)$550.00
Reverse Idler Gear, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 393523R1, Teeth: 30 and 21, For a new version of this item use Item #: 122675, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 422675)$100.01
Reverse Shift Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 380308R2, 380308R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430336)$50.01
Ring and Pinion Set - 51 teeth on ring, 13 teeth and 17 spline on shaft. Kit uses late style bearing 528684R91 and bearing retainer 135770C2. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3088, 3288, 3388, 3588, 3688, 706, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 160584, Ref: 528707R1)$807.15
No Picture
Seal and Bearing Driver Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Kit Includes: (1) PTO Seal Driver, (1) PTO Seal Driver, (1) Quill Bearing Driver, (1) Countershaft Driver, (1) Countershaft Bearing Driver, This driver kit will assist you in installing seals and bearings into your International tractor, (Item #: 176771)$400.00
Shift Cam, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21026, 21206, 21256, 21456, Replaces International OEM nos 380114R22, 380114R21, 430114R20, 430114R19, 430114R18, 430114R17, 430114R16, 430114R15, 430114R14, 430114R13, 430114R12, 430114R11, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430723)$75.01
Shift Fork Assembly, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM nos 380123R21, Speed Transmission, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498620)$68.01
Spacer, Countershaft Gears - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786 (1/74-12/80), 806, 826, 856, 886 (1/74-12/80), 886, 966, 986 (1/74-12/79), 1066, 1086 (1/74-12/79), 1206, 1256, 1456, 1466, 1468, 1486 (1/74-12/79), 2706, 2756, 2806, 2856, 3088 (1/81-12/86), 3288 (1/81-12/86), 3388 (1/79-12/81), 3588 (1/79-12/81), 3688 (1/81-12/86), 4100, 4156, 4166, 4186 (1/76-12/79), 6388 (1/81-12/83), 6588 (1/81-12/83), Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 380126R2, 380126R1, (Item #: 170256)$3.98
Torque Amplifier Eliminator Kit - For International / Farmall tractor models 3388, 3588, 6388, 6588, Includes: Elimination Shaft, front housing, plugs, O-ring, bushing, gear used for spacer, Speed transmission main shaft also required if existing main shaft is not drilled through the center, (Item #: 162948)$729.00
Transfer Case Housing Assembly, Used - For International tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 134375C95, Complete Case Assy, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497866)$1775.01
Transmission Countershaft Nut - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4156, 4166, 4186, 6388, 6588, 6788, Replaces International OEM number 380092R1, Original style with Right Hand threads, (Item #: 176734)$32.00
Transmission Cover Assembly, Rear Frame Front - For range transmission on gear drive tractors. For tractor models 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 5088, 5288, 6388, 6588, 6788. (Item #: 398298R41)$203.38
Electrical System
Alternator - 12 volt, 72 amp. For tractor models (986D 1976-81 with 436 dsl), (1066D 1971-76 with 414 dsl), (1086D with 1976-81 with 414 dsl), (1466D 1971-76 with 436 dsl), (1468D 1971-74 with 550 dsl), (1486D 1976-81 with 436 dsl), (1566D 1974-76 with 436 dsl), (1568D 1974-76 with 550 dsl), (1586D 1976-81 with 436 dsl), (3088, 3288 1981-85 with 358 dsl), (3488 with 1981-84 with 466 dsl), (3588 1978-81 with 466 dsl), (3688 1981-85 with 466 dsl), (3788 1980-81 with 466 dsl), (4166D 1972-76 with 436 dsl), (4186D 1976-78 with 436 dsl), (4366D 1973-76 with 466 dsl), (4386D 1976-81 with 466 dsl), (4568D 1975-76 with 800 dsl), (4586D 1976-81 with 800 dsl), (5088 1981-85 with 436 dsl), (5288 1981-85 with 466 dsl), (5488 1981-84 with 466 dsl), (6388 1981-84 with 436 dsl), (6588, 6788 1981-84 with 466 dsl), (7588, 7788 1982-83 with 800 dsl), (4000, 5000, 5500. Replaces 1102921, 1102922, 1100587, 1105573. (Item #: 110572, Ref: ADR0133)$124.00
No Picture
Alternator - 12 volt, 100 amp. For tractor models (782 1977-85 with 358 dsl), (1400 1977-84 with 358 dsl), (886D 1976-81 with 360 dsl), (986D 1976-81 with 360 dsl), (1086D 1976-81 with 414 dsl), (1586D 1976-81 with 436 dsl), (3088, 3288 1981-85 with 358 dsl), (3388 1978-81 with 436 dsl), (3488 1981-84 with 466 dsl), (3588 1978-81 with 466 dsl), (3688 1981-85 with 466 dsl), (3788 1980-81 with 466 dsl), (5088 1981-85 with 436 dsl), (5288, 5488 1981-85 with 466 dsl), (6388 1981-84 with 436 dsl), (6588, 6788 1981-84 with 466 dsl). All with Neihoff system. Replaces A1-151. (Item #: ANE0001)$902.52
Alternator - 12 volt, 105 amp. For tractor models (3088 1981-85 with 358 dsl), (3388 1978-81 with 436 dsl), (3488 1981-84 with 466 dsl), (3588 1978-81 with 466 dsl), (3688 1981-85 with 466 dsl), (3788 1980-81 with 466 dsl), (5088 1981-85 with 436 dsl), (5288 1981-85 with 466 dsl), (5488 1981-85 with 466 dsl), (6388 1981-84 with 436 dsl), (6588 1981-84 with 466 dsl), (6788 1981-84 with 466 dsl), (7088 1985-86 with 436 dsl), (7288 1985 with 466 dsl), (7388 1982-84 with 466 dsl), (7488 1985 with 466 dsl), (7588 1982-84 with V800 dsl), (7788 1982-84 with V800 dsl). All with Optional alternator. Replaces 1105538, 1101440. (Item #: 116882, Ref: ADR0195)$140.00
Alternator Pulley - This Double Groove Alternator Pulley is 2.350 inches tall, has a 4.400 inch outside diameter and a 0.670 inch (17mm) inside diameter. It is used on 1066, 1086, 1440 Combine, 1460 Combine, 1466, 1468, 1470 Combine, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 6388, 6588, 6788, 766, 786, 815 Combine, 966, 986, Hydro 100, Hydro 186. It replaces original part number 537070R1, 24-1106, 110891 (Item #: 110891, Ref: 537070R1)$27.70
Battery Box - Left Hand, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, Replaces International OEM nos 104859C3, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497568)$145.01
Blower Motor - 12 volt, 4 wire, 3/8 inch shaft diameter, 4-1/4 inch shaft length, 4-1/8 inch body length, 3-1/2 inch body diameter, vented medium and heavy duty rating, 3 speed. For tractor models 1086, 1420, 1440, 1460, 1480, 1486, 1586, 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1688, 3088, 3288, 3388, 3588, 3688, 3688HC, 3788, (4000, 5000 1983 and up), 5088, 5288, 5488, 5500, 6388, 6588, 6788, 786, 886, 986, Hydro 100, Hydro 186, Hydro 3488. (Item #: 108656, Ref: 1987399C3)$72.00
No Picture
Blower Motor - 12 volt, 2 wire, 3/8 inch shaft diameter, 4-1/4 inch shaft length, 4-1/8 inch body length, 3-1/2 inch body diameter, vented medium and heavy duty rating, 3 speed. For tractor models 1086, 1420, 1440, 1460, 1480, 1486, 1586, 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1688, 3088, 3288, 3388, 3588, 3688, 3688HC, 3788, (4000, 5000 1983 and up), 5088, 5288, 5488, 5500, 6388, 6588, 6788, 786, 886, 986, Hydro 100, Hydro 186, Hydro 3488. (Item #: 115215, Ref: 190333A1)$82.00
Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Tractors: 656, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2656, 2706, 2756, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, Hydro 100, Hydro 186. Combine: 715, 815, 915, 1420, 1440, 1460, 1470, 1480. Windrower: 4000, 5000, 5500, 8830. Replaces 539053R3, 539053R2, 539053R1, 1987442C1, 1987399C3, 175577C2, 175577C1. (Item #: 108656, Ref: 72162089)$72.00
Cab Solenoid Power Switch - This Cab Solenoid Power Switch is 100 amp, continuous duty type. It is used on multiple Case and CaseIH models. It replaces part numbers 107655C1, 47388608, 537067R2, 66581C3, 22-608. (Item #: 115718, Ref: 107655C1)$35.00
MPH Transducer, Used - For International tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, Replaces International OEM nos 121869C2, Replaces International Casting nos 47908890, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447065)$310.01
Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872)$42.87
Pulley - This Pulley measures: 1.480 Inches Wide, 4.220 Inch Outside Diameter, 0.670 Inch Shaft Diameter. It is used with 16mm (5/8 inch) Belts. Replaces 384645R1, 24-1105, ADR5022 (Item #: 121930, Ref: 384645R1)$32.00
Starter - Delco Style DD (6192), Used - For International tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 102263A1, 130985C91, Delco No 1113489, Lester No 6192, 12 Volt, 10 Teeth, CCW Rotation, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497484)$263.01
Camshaft Bearing Set - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number 680117C3, 680117C1, Sold as complete set, (Item #: 106672)$26.20
Clutch Bearings and Seal Kit - For International / Farmall tractor models 3388, 3588, 6388, 6588, Includes: Release Bearing, Pilot Bearing, Inner PTO Seal, Outer IPTO Seal and IPTO Bearing Case O-Ring, (Item #: 168437)$82.00
Clutch Booster Cylinder, Remanufactured, 113965C93 - For International / Farmall tractor models 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 113965C93, (Item #: 206994)$860.01
Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681315C3, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106499)$12.00
Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models 3488, 3588, 3788, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Replaces International OEM number 1808060C91, 1808060C92, Bearing Size: .010" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106550, (Item #: 106548)$12.80
Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 687382C3, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106500)$12.90
Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models 3488, 3588, 3788, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Replaces International OEM number 1808061C92, Bearing Size: .020" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106550, (Item #: 106549)$13.70
Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681316C3, 1823858C91, Sold per journal, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106545)$12.90
Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models 3488, 3588, 3788, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Replaces International OEM number 1808062C91, Bearing Size: .030" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106549, (Item #: 106550)$0.98
Connecting Rod Bearing - .040" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Sold per journal, Bearing Size: .040" Oversize, For Standard connecting rod bearing use Item #: 106545, (Item #: 106546)$20.80
Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681314C3, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106546, (Item #: 106498)$11.00
Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models 3488, 3588, 3788, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Replaces International OEM number 1808059C91, 1808059C92, Bearing Size: Standard, Sold per journal, For .010" connecting rod bearing use Item #: 106550, (Item #: 106547)$11.60
No Picture
Differential Bearing Retainer, LH, Used - For International tractor models 766 (s/n 11821-12160, 12181-later), 786, 886, 966 (s/n 20686-21424, 21513-later), 986, 1086, 3088, 3288, 3388, 3588, 6388, 6588, Replaces International OEM nos 68687C1, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436925)$147.01
Differential Bearing Retainer, RH, Used - For International tractor models Hydro 100, Hydro 186, 766 (s/n 11821-12160, 12181-later), 786, 886, 966 (s/n 20686-21434, 21513-later), 986 (except hi-clear), 1066 (s/n 30374-32329, 32539-later), 3088, 3288, 3388, 3488, 3588, 6388, 6588, Replaces International OEM nos 68684C1, Right Hand, With out Seal, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436920)$89.01
Differential Lock Cover, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4386, 4586, 6388, 6588, 6788, Replaces International OEM nos 104667C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433844)$120.01
No Picture
IPTO Bearing Cage O-Ring - For International / Farmall tractor models 3388, 3588, 6388, 6788, Replaces International OEM number 22414, (Item #: 176723)$7.60
IPTO Overhaul Kit - For International / Farmall tractor models Hydro 186, 786, 886 (s/n 17000-later), 986 (s/n 24000-later), 1086 (single speed s/n 26000-later and dual speed s/n 48000-later), 1486 (s/n 26000-later), 1566, 1568, 1586, 3088, 3288, 3388 (s/n 10385-later), 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 977719, For units with hydraulic brakes, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 123136)$238.00
Main Bearings - .010 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Replaces International OEM number 1823848C91, Sold in complete sets, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106628, (Item #: 106629)$143.00
Main Bearings - .020 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106628, (Item #: 106630)$110.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models 3488, 3588, 3788, 4186, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106635, (Item #: 106634)$175.00
Main Bearings - .030 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Bearing Size: .030" Oversize, Sold in complete set, For Standard main bearing use Item #: 106628, (Item #: 106631)$107.00
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models 3488, 3588, 3788, 4186, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106634, (Item #: 106635)$222.00
Main Bearings - Standard - Set - For International / Farmall tractor models 3488, 3588, 3788, 4186, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106635, (Item #: 106632)$149.00
Rear Axle Cap, Used - For International tractor models Hydro 186, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1486, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, 6788, 21026, Replaces International OEM nos 530033R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497623)$80.01
Front Crank Seal - This front crankshaft oil seal has a 3 inch Inside Diameter, a 4 inch Outside Diameter and is .5 inch wide. It Fits: 1440, 1460, 1470, 1480, 1640, 1660, 1680, 453, 815, 915, 1822 (diesels up to SN: JJC0012690), 1844 (diesels up to SN: JJ0002462), 515, H60E, H65C, S10, S8A, S9B, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 966, 986, 886, E200, E412, E412B. Replaces: 690437C91 (Item #: 106647, Ref: 690437C91)$17.98
No Picture
Gasket Set - Complete Gasket Set including crankshaft seals for 414/436/466 CID Diesel engines in: 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and for 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cylinder engine. Cupped head piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines (DT436 CID), 4366, (4386 to engine serial number 74999). (Item #: GK414)$310.60
Head Gasket Set - For 3588, 3788, 4366, 4386, 5288, 5488, 6588, 6788 with DT466 Diesel Engine (Item #: 106695, Ref: HS3872)$108.00
Rear Crankshaft Seal and Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 2856, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 2349-earlier), 1440, 1460, 1480 (s/n 24000-earlier), Compatible with International Construction and industrial models TD15B, 175, Neoprene style, (Item #: 176971)$150.00
No Picture
Rear Main Seal - For 3588, 3788, 4366, 4386, 5288, 5488, 6588, 6788 with DT466 Diesel Engine (Item #: 106660, Ref: SS47866)$29.98
No Picture
Upper Gasket Set - Valve Grind Gasket Set for 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Contains all gaskets necessary for doing a valve job, (including head gasket). (Item #: 106695, Ref: HS414)$108.00
Valve Cover Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466 (Diesel), Replaces International OEM number 1342828C1, Rubber, (Item #: 128631)$8.70
Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - For 3588, 3788, 4386, Engine serial number 77300 and up, 5288, 5488, 6588, 6788, 7288, 7488 and Comb 1470, 1480. (DT466B, DTI466B, DTI466C. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. Order pin bushing and bearings separately if needed. (Item #: 130625, Ref: BEKHDT466B-LCB)$1269.01
No Picture
Basic In-Frame Engine Kit - For 3588, 3788, 4386, Engine serial number 77300 and up, 5288, 5488, 6588, 6788, 7288, 7488 and Comb 1470, 1480. (DT466B, DTI466B, DTI466C. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189604, Ref: BIFHDT466B)$1399.22
Cylinder Sleeve - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number A77692, Bore: 4.3", Flange Outside Diameter: 5.245", Overall Length: 9.435", Flange Thickness: .35", (Item #: 128746)$41.00
Rear Main Seal Sleeve and Seal Installer - Used to install both the seal and sleeve at the same time, this tool is used with 106660 Seal and Sleeve set. (Item #: 122044)$260.00
2nd Speed Drive Gear, Used - For International tractor models Hydro 100, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 21456, Replaces International OEM number 528672R1, 25 Degrees, Teeth: 32, Splines: 25, For a new version of this item use Item #: 111940, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411940)$87.00
3rd and 4th Sliding Gear, Used - For International tractor models Hydro 100, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, 21456, Replaces International OEM number 528675R1, 3rd and 4th, Teeth: 31, Splines: 20, For a new version of this item use Item #: 111941, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411941)$120.01
Bull Gear, Used - For International tractor models Hydro 100, Hydro 186, 806, 856, 966 (Gear Drive), 986, 1026, 1066 (hydro), 2806, 2826 (Gear Drive), 2856, 3488 (Hydro), 3588, 3688, 6588, 21026, Replaces International OEM nos 384075R1, Width: 3 1/4", Splines: 28, Teeth: 73, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497321)$370.01
Camshaft - This New Camshaft is used on 6 Cylinder 400 Series Diesel engines. Replaces original part number 1802337C91 (Item #: 113417, Ref: 1802337C91)$279.00
Camshaft with Drive Gear and Thrust Plate - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Replaces International OEM number 1802337C1, 1802337C2, 1802505C1, Kit Includes Drive Gear and Thrust Plate, Order Lifters Separately, For Camshft only use Item #: 113417, (Item #: 122005)$574.00
Camshaft With Large Lifters and Gear - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Kit Includes Drive Gear, Thrust Plate and 12 New 1-1/8" Lifters, (Item #: 122003)$669.00
Camshaft with Small Lifters and Gear - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Kit Includes Drive Gear, Thrust Plate and 12 New 1" Lifters, (Item #: 122002)$878.00
Connecting Rod Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D414, DT414, D436, DT436, DT466, Replaces International OEM number 676679C2, (Item #: 128743)$5.90
Constant Mesh Gear, Used - For International tractor models Hydro 100, Hydro 186, 756, 766, 786, 826, 886, 966, 986, 1026, 1066, 1086, 1456, 1466, 1468, 1486, 2756, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, 21206, 21456, Replaces International OEM number 406028R1, Teeth: 50, Splines: 24, Outside Diameter: 8.5", Inside Diameter: 2.25", For a new version of this item use Item #: 115877, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 415877)$125.01
Constant Mesh Gear, Used - For International tractor models 1566, 1568, 1586, 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 67772C1, Teeth: 48, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499198)$100.01
Constant Mesh Gear, Used - For International tractor models 3388, 3588, 6388, 6588, Replaces International OEM nos 141992C1, Teeth: 28, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430717)$234.01
No Picture
Countershaft Front Bearing Retainer, Used - For International tractor models 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 67773C, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434851)$37.01
No Picture
Countershaft Rear Bearing Retainer, Used - For International tractor models 1566, 1568, 1586, 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 67768C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434849)$66.01
Countershaft, Used - For International tractor models 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 67770C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434850)$129.01
Crankshaft Damper Pulley - This is a 3 spoke pulley/dampener. For tractor models 1066, 1086, 1440, 1460, 1480, 3488, 3588, 3688, 4166, 4186, 5088, 6588, 666, 686, 766, 815, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. All with DT-414, DT436, D-312 or D-360 engines. It measures: 10.203 inch outside diameter, 2.125 inch center hole and 2.61 inches wide. Replaces 680275C92. (Item #: 112099, Ref: 680275C92)$352.41
Crankshaft, Remanufactured, 675669C92, 675591C - For International / Farmall tractor models 3588, 3788, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 1470, 1480, Replaces International OEM number 675669C92, Replaces Casting number 675591C, 1816975C1, 1821913, 675591C2, 675591C3, 675591C4, Engine: DT466, 7.6 Liter, 6 Cylinder, Flange: Flat, No Centering Ring, 8 Bolt Holes, Snout: Straight, 3 Bolt Holes, 1 Keyway With Oil pump Drive Gear Installed, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 100789, (Item #: 200260)$1500.01
No Picture
Deep Well Lifter - For International / Farmall tractor models Hydro 100, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3488, 3588, 3788, 4166, 4186, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, Compatible with International Combine (s) 1440, 1460, 1470, 1480, Replaces International OEM number 684729C1, (Item #: 165595)$8.30
Drive Gear, 3rd Speed, Used - For International tractor models Hydro 100, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, 21456, Replaces International OEM nos 528671R1, Teeth: 42, Splines: 25, 3rd Speed, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499216)$100.01
Driving Gear, Used - For International tractor models Hydro 100, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4156, 4166, 4186, 6388, 6588, 21456, Replaces International OEM number 406473R1, Splines: 25, Teeth: 27, 1st Speed Driving, For a new version of this item use Item #: 108863, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408863)$75.01
Filter Cover Frame, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 138170C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437057)$72.01
No Picture
Flywheel - With Ring Gear. For 3388, 3588, 3788, 6388, 6588, 6788. (Item #: 103905, Ref: R2924)$667.15
Forward Reverse Shift Collar, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 393524R1, 380302R1, 3.61" Dia., Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498210)$40.01
Gear, 1st and 2nd Speed, Used - For International tractor models 3388, 3588, 6388, 6588, Replaces International OEM nos 142097C1, Teeth: 38 and 46, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431166)$510.01
Hi-Lo Driven Gear Carrier, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 380289R1, Height: 2", Outside Diameter: 2 3/4", Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431513)$35.01
Hi Lo Shift Collar, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 393521R1, Diameter: 5.05", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498208)$95.01
Hi Low Driven Gear, Used - For International tractor models 1566, 1568, 1586, 3588, 3788, 6588, 6788, Replaces International OEM nos 67766C1, Replaces Casting nos 67767C1, Teeth: 45 and 23, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499200)$195.01
Hydraulic Pump Drive Gear, Used - For International tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 134455C1, Teeth: 27, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498624)$95.01
Lo Drive Gear, Used - For International tractor models 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 67771C1, 3.05" ID, 30 Splines, Teeth: 28 and 33, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499199)$150.01
Propeller Shaft Tube Assembly, Used - For International tractor models 3388, 3588, 3788, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 142138C2, 142138C1, Engine Drive, Length: 50 5/8", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497578)$590.01
Push Rod - Used in IH diesel engines: D414, DT414, DT466B, DT466C, DTI466C, D436, DT436, D466, DT466, Early DT466B, Early DT466C, this part replaces OEM numbers 675621C1, 675621C2. These engines are found in Hydro 100 ``Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 5088, 5288, 5488, 6388, 6588, 6788. This push rod is 11-1/4 inches long. (Item #: 108771)$15.50
Range Shift Cover, Used - For International tractor models 786, 886, 986, 1086, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 398298R41, 398298R11, Without Dipstick, With speed Senor, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447091)$148.01
No Picture
Remanufactured Bare Block, Remanufactured, 675500C, 1810739C - For International / Farmall tractor models 966, 1066, 3388, 3588, 3788, Compatible with International Engine (s) DT466, Replaces International Block Casting number 675500C, 1810739C, Our remanufactured bare blocks have been; cleaned, inspected, (Item #: 204893)$1325.01
Reverse Drive Gear, Used - For International tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 127314C2, 127314C1, Teeth; 34, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430277)$321.01
Ring Gear, Flywheel - This Flywheel Ring Gear has 132 Teeth, 16.685 inch outside diameter, 15.490 inch inside diameter, 0.875 inch width. It is used on 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 21206, 21256, 21456, 3388, 3588, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788. D361 Eng, D407 Eng, D414 Eng, D436 Eng, DT361 Eng, DT407 Eng, DT414 Eng, DT429 Eng, DT436 Eng. Replaces 326759R1 (Item #: 103902, Ref: 326759R1)$105.00
No Picture
Ring Set 1 Cylinder - RING SET 1 Cylinder. For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 915, all with 414 CID, 6 cylinder turbocharged diesel, standard bore 4.3 inches. Contains 2 x 1/8, 1 x 1/4, per cylinder. Can also be used to replace 687429C91. (Item #: 684256C91)$56.99
Shaft with Duckfoot - For International / Farmall tractor models 766 (s/n 17047-later), 786, 886, 966 (s/n 32222-later), 986, 1066 (s/n 57646-later), 1086, 1466 (s/n 30001-later), 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 71526C1, (Item #: 164469)$110.00
No Picture
Shaft with Duckfoot, Used - For International tractor models 766 (s/n 17047-later), 786, 886, 966 (s/n 32222-later), 986, 1066 (s/n 57646-later), 1086, 1466 (s/n 30001-later), 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 71526C1, For a new version of this item use Item #: 164469, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435209)$62.01
Shift Collar Carrier, Used - For International tractor models Hydro 100, Hydro 186, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2756, 2826, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 533927R1, External Splines: 23, Internal Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497843)$25.01
Shift Rail, Used - For International tractor models 706, 756, 766, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 380122R1, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430720)$27.01
Speed Transmission Ball Joint - For International / Farmall tractor models 786, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces Case IH OEM number D149295, 158397H1, Thread: 3/8-24 UNF Thread, (Item #: 163710)$12.00
No Picture
Tach Drive Gear, Used - For International tractor models 666, 686, 766, 966, 1066, 1466, 1486, 1566, 3388, 3588, 3788, 4166, 4366, Compatible with International Engine(s) D312, D360, D414, DT414, D436, D466, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C, Replaces International OEM nos 676938C1, Teeth: 32, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443199)$116.01
Timing Gear, Camshaft - 66 teeth. For tractor models 666, 686, 766, 826, 886, 926, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 185488, Ref: 675600C1)$202.00
No Picture
Timing Gear, Crankshaft - 33 teeth. For tractor models 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 155745, Ref: 675406C1)$184.00
Torque Amplifier Drive Gear, Used - For International tractor models 1566, 1568, 1586, 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 68142C2, 68142C1, Splines: 24, Teeth: 47, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436868)$279.01
Torque Amplifier Input Shaft - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, Compatible with International Construction and industrial models 21256, 21456, Replaces International OEM number 380076R4, 26 Tooth, (Item #: 162945)$578.00
Torque Amplifier Quill, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 382349R1, 382349N, For a new version of this item use Item #: 110264, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410264)$79.01
Transmission Countershaft, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148951C1, 148951C, Tubular, LH Thread, Early SN 66 and prior models requires spacer 71147C1, 71147C2, For a new version of this item use Item #: 113419, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497400)$179.01
Transmission Drive Shaft, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 380076R4, 380076R1, 380076R2, 380076R3, Teeth: 26, Splines: 11, For a new version of this item use Item #: 162945, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499217)$200.01
Transmission Main Shaft, Used - For International tractor models 826, 856, 966, 1066, 1086, 1456, 1466, 1468, 1486, 2826, 2856, 3388, 3588, 3688, 6388, 6588, 21456, Replaces International OEM number 529434R2, For tractors with Torque Amplifier, Teeth: 20 and 23, For a new version of this item use Item #: 117484, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 417484)$185.01
Transmission Shaft - For International / Farmall tractor models 826, 856, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2826, 2856, 3388, 3588, 3688 (all with or without TA), 3788, 6388, 6588, 6788, 21456 (all with or without TA), Replaces International OEM number 529434R2, 529282R2, 529282R1, Splines: 20 / 23, (Item #: 117484)$400.00
Valve, Exhaust - Exhaust Valve. For 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cylinder engine. Cupped Head Piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). (Item #: 156090, Ref: 676865C2)$21.70
Valve, Intake - Intake Valve. For 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cyline engine. Cupped head piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). (Item #: 156088, Ref: 675046C2)$17.80
No Picture
Valve Service Kit - Cylinder HEAD Service KIT. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Contains: springs, guides, locks, (no valves). (Item #: VSKH414)$127.04
Valve Tappet 0.999 Inch - These tappets are used in the following engines: C221, C263, C291, C301, (DT436 Engine serial number <121624), (DT436B Engine serial number <121624), (DT466 Engine serial number <140087), (DT466B Engine serial number <140087), D188, D236, D282, D360, D361, (D414 Engine serial number <155806), (D436 Engine serial number <121624), (D466 Engine serial number <140087). They are 0.999 inch diameter. Replaces original part numbers 72524R3, 684729C1, 911776R3, 91176R2, 911776R1, 76952R2, 677541C1, 606492, 28708A, 75524R3, 75524R2, 75524R1. (Item #: 108437, Ref: 911776R3)$6.90
Valve Tappet 1.12 Inch - These tappets are used in the following engines: DTI466C, (DT436 Engine serial number 121624>), (DT436B Engine serial number 121624>), (DT466 Engine serial number 140087>), (DT466B Engine serial number 140087>), DT466C, (D414 Engine serial number 155806>), (D436 Engine serial number 121624>), (D466 Engine serial number 140087>). They have a 1.12 inch diameter. Replaces original part number 1802340C1. (Item #: 156082, Ref: 1802340C1)$10.80
Exhaust Manifold - Rear, Used - For International tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine(s) 815, 915, 1460, 1470, 1480, Replaces International OEM number 675779C1, 675779C2, 675779C3, Rear Section, For a new version of this item use Item #: 121729, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421729)$87.01
Front Exhaust Manifold, Used - For International tractor models 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 6388, 6588, 6788, Compatible with International Combine(s) 915, 1460, 1470, 1480, Replaces International OEM number 683562C1, 683564C91, Replaces OEM nos 672275C3, 672275C2, For a new version of this item use Item #: 121728, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421728)$137.01
Manifold Gasket Set - Used with 683564C91 front and 675779C3 rear manifolds. (Item #: 121768, Ref: R4919G)$23.00
Muffler Eliminator - For International / Farmall tractor models 3388, 3588, 3788, Use In Place Of Mufflers 127343C1, 143660C1, Use Orginal Stack, Eliminates Muffler Heat Build Up, Boost The Horsepower, Save Fuel, and Engines Run Cooler, RPM Is Increased Even Under A Full Load, Noise Level Is Not Increased Inside The Cab, (Item #: 124238)$171.00
Turbocharger Air Outlet, Used - For International tractor models 1066, 1086, 3488, 3588, 3788, 4366, 4386, 6588, 6788, Compatible with International Combine(s) 915, Compatible with International Engine(s) DT414 (s/n 158049-earlier), DT436 (s/n 123763), DT466 (s/n 146120-earlier), DT466B (s/n 146120-earlier), DTI466 (s/n 146120-earlier), DTI466B (s/n 146120-earlier), DTI466C (s/n 146120-earlier), Replaces International OEM nos 676165C2, 676165C1, 681960C91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432777)$89.01
Turbo Exhaust Pipe - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 121956C1, Seal Ring Kit use Item #: 124241, (Item #: 124240)$112.00
Fuel System / Air Intake
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple International/Farmall models. Replaces: 383734R2, 625043C1. (Item #: 121925, Ref: T23262)$6.00
Air Filter - This Air Filter is used on IH 1086, 1440, 1460, 1470, 1480, 1486, 1660, 1666, 1680, 1688, 3088, 3288, 3388, 3588, 3788, 5088, 5288, 5488, 7110, 7120, 7130, 7140, 786, 886, 986. Replaces 143481C2, 143481C91, 143481C92, AF1870, V105382, 42554 (Item #: 126000, Ref: 143481C92)$60.00
Fuel Injection Pump, Remanufactured, Ambac, 6A-100A-9274-17, 735027 - For International / Farmall tractor models 3588 (4WD), 6588 (4WD), Replaces International OEM number 735027, Replaces Ambac manufacturer number 6A-100A-9274-17, 6A-100A-9274-20, 6A-100A-274-22, 6A-100A-9274-31, 6A-100A-550-31, (Item #: 200718)$1635.01
Fuel Sending Unit - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 121810C1, (Item #: 119748)$80.00
Throttle Cable - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 127338C2, Overall Length: 132", Mount to Mount: 115", (Item #: 151978)$99.00
Hitch / Drawbar
No Picture
3 Point Upper Adjusting Screw, Used - For International tractor models Hydro 186, 1066, 1086, 1466, 1468, 1566, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6788, Replaces International OEM number 108584C1, Right Hand Thread 1.250" -7, 10.00" long, Thread Length 5.125, For a new version of this item use Item #: 108796, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435416)$49.01
Adjusting Screw, Upper - Used on International HYDRO 186, 1066, 1086, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6788, this screw is 1.25 inches in diameter, 10 inches long, with 5.125 inches thread length. It is used with 149837C1 Lower Screw and 72877C1 Leveling Screw Housing. (Item #: 108796, Ref: 108584C1)$82.00
Center Link Assembly (Cat III) - Note: This Assembly consist of one each of 1981986C1 front end, 1282063C2 rear end, and 1954221C3 center. The complete assembly will work for models 1066-6788 however the individual components are not interchangeable with original equipment and you must use the whole assembly. Components are compatible and interchangeable with original equipment on models 7110-8950. 1066, 1086, 1456, 1466, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 5088, 5288, 5488, 6388, 6588, 6788, 21206, 21256, 21456, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 9310, 9330, 9350. The ends are 1.500 inch thread. Replaces 108591C91, 1252108C92, 1252108C94, 1331853C2, 1331854C1, 1331855C1, 1331855C3 (Item #: 102070, Ref: 1331854C2)$182.00
Center Link Bracket, Used - For International tractor models 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 392210R21, 392210R51, 392210R3, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497177)$50.01
Center Link Handle - Used on 1954221C3 top link center, this handle will replaces OEM part number 1331863C2. Used on International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 3388, 3588, 3788, 5088, 5488, 6388, 6588, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8288, 8910, 8920, 8930, 8940, 8950, 9310, 9330, 9350, MTX155, MTX165, MTX175, MTX185, MTX200, MX150, MX170, MX180, MX200, MX220, MX240, MX270, MX275, XTX185, XTX200, XTX215 (Item #: 170271, Ref: 1331863C2)$4.98
Center Link Handle - Category 2 - For International / Farmall tractor models Hydro 100, Hydro 186, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces Case IH OEM number 108592C2, (Item #: 164940)$20.30
Complete Sway Limiter Assembly, Used - For International tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, Replaces International OEM number 406250R1, For a new version of this item use Item #: 108841, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408841)$73.01
Control Arm Kit - Control Arm Repair Kit contains, 38256R21 control arm, 380115R2 roller, 383997R1. 56 series tractor models: 756, 856, 1026, 1256, 1456. Early 66 series models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, 3088-3788, 63 For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 706, 756, 766, 786, 806, 856, 886, 966, 986. (Item #: 113499, Ref: 382565KIT)$44.00
Control Arm Kit - Shifter control repair kit contains, 398300R1 arm, 380115R2 roller, 398304R1 spring. Tractors: 766 after serial number 17047, 966 after serial number 32222, 1066 after serial number 57646, 1466 after serial number 30001 all 1566, 786, 886, 1086, 1486, 1586, 3088 thru 3788 6388 thru 6788. For 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 756, 766, 786, 856, 886, 966, 986. (Item #: 111858, Ref: 398300KIT)$77.00
Crank Arm Shaft, Used - For International tractor models 1086 (s/n 37888-earlier), 1486 (s/n 20243-earlier), 1586 (s/n 17123-earlier), 3388 (s/n 9038-earlier), 3588 (s/n 9501-earlier), Replaces International OEM number 71386C1, For a new version of this item use Item #: 111279, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435537)$269.01
Drawbar Hammerstrap - Used on International models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, this Drawbar Hammer strap replaces 108506C1, 108511C91. If a new space is needed, order part numbers 483858R1 (Item #: 110224, Ref: 108506C1)$80.00
Drawbar Hammerstrap - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 400297R1, Pin hole is 5-1/2" from bend in strap, For use with spacer 368514R1 (110041), (Item #: 110042)$193.00
Drawbar Pin, Front - Check the size of the pin before ordering. Many models listed use more than one size. This pin measures 1.375 inches in diameter and is 4.965 inches long. Used on International models: 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788. Replaces OEM number 108505C1 (Item #: 112538, Ref: 108505C1)$14.20
Drawbar Stop Block - Used on the following models with one piece swinging drawbars: Hydro 100, Hydro 186, 766 serial number 13893 and above, 786, 886, 966 serial number 27090 and above, 986, 1066 serial number 45052 and above, 1086, 1466 serial number 24403 and above, 1468 serial number 10084 and above, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788. Replaces International part number 108507C1 (Item #: 153256, Ref: 108507C1)$21.70
Drawbar Stop Block, Used - For International tractor models Hydro 100, Hydro 186, 766 (s/n 13893 - later), 786, 886, 966 (s/n 27090 - later), 986, 1066 (s/n 45052 - later), 1086, 1466 (s/n 24403 - later), 1468 (a/n10084 - later), 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, Replaces International OEM number 108507C1, All with one piece drawbar, For a new version of this item use Item #: 153256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453256)$11.76
Drawbar Support, Used - For International tractor models 1086 (s/n 15070-later), 1486 (s/n 9880-later), 1586, 3388, 3588 (s/n 8912-later with 1 3/8" PTO), 3788 (with 1 3/8" PTO), Replaces International OEM nos 72812C1, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499559)$150.01
Drawbar Support, Used - For International tractor models 1066, 1086 (s/n 15069-earlier), 1466, 1486 (s/n 9879-earlier), 1566 (s/n 7115-later), 1568 (s/n 7206-later), 3588 (s/n 8911-earlier with 1 3/8" PTO), 3788 (with 1 3/4" PTO), Replaces International OEM nos 108500C1, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499560)$250.01
No Picture
Front Drawbar Pin, Used - For International tractor models 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 108505C1, 4.965" Long, 1.375" Diameter, Check size before ordering, For a new version of this item use Item #: 112538, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435597)$10.01
Front Drawbar Support, Used - For International tractor models 766, 886 (s/n 10843-earlier), 966, 986 (s/n 12883-earlier), 1066, 1086 (s/n 18932-earlier), 1466, 1468, 1486 (s/n 14409-earlier), 1566, 1568, 1586, 3388, 3588, 3788, Replaces International OEM nos 108508C1, Replaces Casting nos 108509C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497599)$176.01
Front Drawbar Support, Used - For International tractor models Hydro 186 (s/n 9159-later), 786, 886 (s/n 10844-later), 986 (s/n 12884-later), 1086 (s/n 18933-later), 1486 (s/n 11410-later), 1586 (s/n 16506-later), 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 72475C1, Marked 73158C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497209)$167.01
Front Stabilizer Eyebolt - Used with 392183R1 stabilizer control arm and 522246R1 pin, this part is used on International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788 (Item #: 108838, Ref: 392185R1)$21.30
Hammerstrap Space - Used with 108506C1 Hammerstrap, this part replaces 483858R1, 108512C1. Used on International tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788 (Item #: 123825, Ref: 483858R1)$7.60
Latch Spring, Lower - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382192R1 (Item #: 109644, Ref: 382192R1)$11.30
Latch Spring, Upper - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382193R1 (Item #: 108835, Ref: 382193R1)$11.30
Leveling Screw Housing - Used with 108583C1 and 108584C1 screws, this housing is 14.125 inches long with 1.250 inch threads. It replaces 108588C1 and 72877C1. Used on International models: HYDRO 86, 1066, 1086, 1466, 1486, 1566, 1568, 1586, 3388, 3488, 3588, 3788, 6388, 6588, 6788, 786, 886, 986. (Item #: 108893, Ref: 72877C1)$116.00
Linkage Stud - This stud is used in association with 392185R1 Eyebolt, 392193R21 Lockout pin, 392195R1 Eyebolt, 406248R2 Rear yoke, 406249R1 Front yoke, 522246R1 Pin, 67693C1 Pivot Pin. This stud is 1.250 inches in diameter. (Item #: 108845, Ref: 406247R1)$34.00
Lower Adjusting Screw - Measuring 12.125 inches over all length, this Adjusting Screw and 1.250 inch - 7 thread. The threaded portion is 6.268 inches long. This part replaces: 1272852C1, 1272852C91. It is used on HYDRO 186, 1066, 1086, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6788, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 7288, 7488, 8910, 8920, 8930, 8940, 8950. This part is used with 108584C1 Upper Adjustment Screw, 149836C4 Leveling Screw Housing, 149838C1 Upper Adjustment Screw, 72877C1 Leveling Screw Housing. (Item #: 108795, Ref: 149837C1)$81.00
Lower Lift Arm Front Bushing - This inside diameter of this bushing is 1.009 inches. The outside diameter is 1.252 inches. It is used on international models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488. It is used on the front lower link. The part replaces OEM numbers 1272681C1, 71808C1, 392180R1 (Item #: 165272, Ref: 1272681C1)$41.00
Pivot Pin - Used on International 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, this pin replaces International OEM numbers 67693C1, 392184R1. 392184R1 is a threaded pin, but this will work in its place. Used with 406250R1 sway limiter. (Item #: 108842, Ref: 67693C1)$41.00
Rear Stabilizer Eye Bolt - Used on Category III three point hitches, this part is used with 522246R1 Pin (not included). Fits International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. (Item #: 108840, Ref: 392195R1)$29.98
Rear Stabilizer Eye Bolt, Used - For International tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 21206, 21256, 21456, Replaces International OEM number 392195R1, For a new version of this item use Item #: 108840, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408840)$32.01
Stabilizer Control Arm - Used on Category III hitches, this Stabilizer Control Arm is used on International Models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. It is used with 392185R1 Eyebolt, 392195R1 Eyebolt, 406250R1 Sway Limiter, 522246R1 Pin, 67693C1 Pivot Pin. (Item #: 108839, Ref: 392183R1)$407.00
Stabilizer Control Arm, Used - For International tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 21206, 21256, 21456, Replaces International OEM number 392183R1, Category 3, For a new version of this item use Item #: 108839, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408839)$180.01
Stabilizer Yoke, Front - Part of the 406250R1 assembly, this part is the Front Yoke. It measures 3.980 inches long. Used on International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. Replaces International part numbers 406249R1 (Item #: 108847, Ref: 406249R1)$82.00
Stabilizer Yoke Pin - Used front and rear on Category III hitches, this pin measures A - 2.500 inches long and, B - .745 inches in diameter. Replaces 392194R1, 522246R1. (Item #: 155140, Ref: 522246R1)$5.30
Stabilizer Yoke, Rear - Part of the 406250R1 assembly, this part is the Front Yoke. It measures 6.125 inches long. Used on International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. Replaces International part numbers 406248R2 (Item #: 108846, Ref: 406248R2)$73.00
Sway Limiter Assembly - Consisting of one each of 406249R1 Yoke, 406247R1 Stud, 406248R2 Yoke, 392193R21-BP Pin, this is a complete assembly. It is used on International tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. Replaces 406250R1 (Item #: 108841, Ref: 406250R1)$140.00
Sway Limiter Cam, LH, Used - For International tractor models 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 142583C1, 70481C1, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497175)$147.01
Sway Limiter Cam,RH, Used - For International tractor models 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 142584C1, 70482C1, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497172)$95.01
Sway Limiter Lockout Pin - Used on 406250R1 sway limiter on the following International tractors: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788 (Item #: 108843, Ref: 392193R21)$12.60
Telescoping Lift Arm Latch - For Category II three point hitches, this latch is used on International models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21206, 21256, 21456. Order 382193R1 Upper Spring and 382192R1 Lower Spring if need (sold separately). Replaces 398399R1 (Item #: 109523, Ref: 398399R1)$23.20
Three Point Stabilizer Front Eye Bolt, Used - For International tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 21206, 21256, 21456, Replaces International OEM number 392185R1, Used With 392183R1 Stabilizer Control Arm, For a new version of this item use Item #: 108838, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408838)$10.51
Top Link Center - NOTE: This item will not work with standard duty OEM components on models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588 and 6788. Full assembly 1331854C2 must be used for these applications because of the larger 1.500 inch thread size. This part is compatible with original equipment on models 7110 through 8950. This part replaces 1954221C1, 1954221C2 (Item #: 170260, Ref: 1954221C3)$97.98
Top Link End, Front RH Threads - NOTE: This item will not work with standard duty OEM components on models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588 and 6788. Full assembly 1331854C2 must be used for these applications because of the larger 1.500 inch thread size. This part is compatible with original equipment on models 7110 through 8950. (Item #: 118323, Ref: 1981986C1)$41.98
Top Link End, Rear LH Threads - NOTE: This item will not work with standard duty OEM components on models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588 and 6788. Full assembly 1331854C2 must be used for these applications because of the larger 1.500 inch thread size. This part is compatible with original equipment on models 7110 through 8950. (Item #: 118322, Ref: 1282063C2)$199.00
Top Link Pin - Replacing OEM part numbers 1286040C5, 1286826C2, 1286840C7, 392208R12, P6840, this top link pin has a diameter of 1.25 inches. It is used on the following models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206 Indust/Const, 21256 Indust/Const, 21456 Indust/Const, 3388, 3588, 3788, 4100 Indust/Const, 4166, 4186, 5088, 5288, 5488, 6388, 6588, 6788, 7110, 7130, 7210, 7230 (Item #: 108553, Ref: 1286840C7)$31.98
No Picture
Torque Shaft Crank Arm. LH, Used - For International tractor models 786, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 71388C1, Fits Left Hand Side, Bolt Style, For a new version of this item use Item #: 108547, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435406)$161.01
Torsion Shaft Crank Arm, LH - Left Hand Torsion Shaft Crank Arm for tractor models 1086, 1486, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788. (Item #: 108547, Ref: 71388C1)$300.00
Torsion Shaft Crank Arm, RH - Right Hand Torsion Shaft Crank Arm for tractor models 1086, 1486, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788. (Item #: 111605, Ref: 71389C1)$300.00
Torsion Shaft with Hole - For tractor models 1086 (to serial number 37888), 1486 (to serial number 20243), 1586 (to serial number 17123), 3388 (to serial number 9038), 3588 (to serial number 9501). Replaces 71386C1. (Item #: 111279, Ref: 71387C1)$437.00
Torsion Spring Bar, Used - For International tractor models 966 (Hydros), 1066 (s/n 53785-earlier), 1086, 1466 (s/n 28107-earlier), 1468, 1486, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 71385C1, 71385C2, Used with Crank Arm Shaft 71387C1, Length: 21 5/8", Uses Locating Bolt 71390C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499579)$145.01
Hydraulic System
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet with extended curve. Use on the following with Aspirated Air Cleaner: 1086, 1486, 1586, 3388, 3588, 3788, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788. Replaces 146490C1, 146490C2. (Item #: 173287, Ref: 146490CHR)$167.00
Cover Repair Kit - Transmission Top Cover Repair KIT. For late "66" series tractors: 1066, 1086, 1466, 1486, 1566, 1586, 3088, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 766, 786, 886, 966, 986. This kit is an improved replacement for worn shifter shaft (shaft usually wears due to vibration and linkage mis-adjustment). Contains: 71526 Hi/Lo shifter kit (parts shown in picture) AND also includes: (2) 398300R1 arm, (2) 380115R2 roller and (1) 398304R1 spring. (Item #: 173012, Ref: IH6688KIT)$157.00
No Picture
Hydraulic Coupler Conversion Kit with 1/2 - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3788, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, Replaces International OEM number 1272964C91, 1272964C92, 1272964C93, 1272964C94, Kit Includes:(1/2" x 14 Thread, NPTF), 4 Hydraulic Seals, 2 Coupler Dust Caps, and O-Ring and Seal Kit, (Item #: 163782)$232.00
Hydraulic Coupler Conversion Kit with 7/8" Male Coupler Tips - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3788, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, Replaces International OEM number 1272964C91, 1272964C92, 1272964C93, 1272964C94, Kit Includes: 2 Male Coupler Tips (7/8" x 14 Thread, O-Ring Boss), 4 Hydraulic Seals, 2 Coupler Dust Caps, and O-Ring and Seal Kit, (Item #: 163783)$230.00
Hydraulic Pump - Pump is open back type to use with piggy-back pump, 17 GPM rating, max PSI of 2250. Not for use in 12 GPM systems. If system is 12 GPM, use 1949296C1. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Hydraulic Pump is 17 GPM. (Item #: 104237, Ref: 70935C91)$390.00
Hydraulic Pump Conversion Kit - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, This kit is used to convert Power Priority (Piston pump) to Constant Displacement (Gear pump), Includes: pump, lines, plates, other parts, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 111875)$1869.01
Hydraulic Pump, Used - For International tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 1272916C91, 1255006C95, R133593C93, Piston style pump, 12 GPM, Power Steering Pump, For a Remanufactured version of this part use Item #: 398608, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498608)$995.01
Hydraulic Remote Coupler, Used - For International tractor models Hydro 100, Hydro 186, 766, 786, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 544786R95, 536761R91, 544786R91, 544786R93, 544786R94, For a Remanufactured version of this part use Item #: 207002, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499568)$575.01
Priority Valve Assembly, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 127925C92, 127925C91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496796)$475.01
TA Gasket Kit - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, Includes: MCV Gasket Kit and O-Ring Seal Package, For MCV Gasket Kit Only use Item #: 114588, (Item #: 168415)$188.00
Lights
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116)$14.70
No Picture
Front Lower Light Panel, Left Side - This Front Lower Light Panel fits the left side of 1086, 1486, 1586, 3388, 3588, 3788, 786, 886, 986, Hydro 186 all with cab and without front cab lights. Replaces: 117746C1, 117746C2. Comes Primered. (Item #: 108543, Ref: 117746C2)$54.00
Front Lower Light Panel, Right Side - This Front Lower Light Panel fits the right side of 1086, 1486, 1586, 3388, 3588, 3788, 786, 886, 986, Hydro 186 all with cab and without front cab lights. Replaces: 117747C1, 117747C2 Comes Primered. (Item #: 108544, Ref: 117747C2)$54.00
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED)$33.00
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91)$9.10
Tail Lamp - There is no reason that this can't be used for your tractor if you need tail lights. This Round tail light is 4 inches around, with 2 1/2 inch center to center mounting holes. It is 1 1/2 inches deep and has 2 wire. If you need this light as a warning light or turn signal, order LED90 to go with it. This part is for 12 volt systems. (Item #: 182906, Ref: 131183C91)$60.00
Miscellaneous
Alternating Check Valve, Used - For International tractor models Hydro 186, 786, 886, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Planter(s) 800, 900, Replaces International OEM nos 142864C95, 108575C91., 142864C91, 142864C92, 142864C93, 142864C94, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497430)$475.01
Auxiliary Control Valve Closed Center, Used - For International tractor models Hydro 186, 986, 1086, 1486, 1586 (s/n 2100-later), 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 113888C93, Has 2 plugs on top side of valve, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497477)$330.01
No Picture
Cab Foam Door Panel - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Color: Black, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112756, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112732)$169.00
Cab Foam Door Panel, Western Cab, Brown - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488 (Western Cab), Color: Brown, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112727, (Item #: 112733)$166.00
No Picture
Cab Foam Door Panel, Western Design, Brown - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Color: Western Design Brown, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112743, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112736)$160.00
Cab Foam Floor Mat with Padding, Black - For International / Farmall tractor models 3388, 3588, 3788, Color: Black, Kits are computer cut to assure accuracy, (Item #: 112702)$114.00
No Picture
Cab Foam Kit - 8-Piece - Black For 86 Series, 3388, 3588, 3788, Hydro 186 (Item #: 109455, Ref: R0137)$177.00
Cab Foam Kit less Headliner, Black - For International / Farmall tractor models 3388, 3588, 3788, Color: Black, Kits are computer cut to assure accuracy, Includes Spray Adhesive, Cab Foam Kit less Headliner, Red use Item #: 112732, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112745)$203.00
No Picture
Cab Foam Kit less Headliner, Black Basketweave - For International / Farmall tractor models 3388, 3588, 3788, Original Equipment Style Foam, Includes Adhesive Spray, For Cab Foam Kit less Headliner, Black use Item #: 112745, (Item #: 172243)$175.00
No Picture
Cab Foam Kit less Headliner, Polomino Gunsmoke - For International / Farmall tractor models 3388, 3588, 3788, Color: Palomino Gunsmoke, Kits are computer cut to assure accuracy, Includes Spray Adhesive, (Item #: 172247)$212.00
Cab Foam Pedestal Cover - For International / Farmall tractor models 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, Color: Black, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112727, (Item #: 112754)$113.00
Cab Glass - Door, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 109584C2, For White or Red Cab, For Right or Left Door, For a new version of this item use Item #: 109772, Item ships via freight carrier, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409772)$263.01
Cab Glass, Lower - Left Hand, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 109131C2, A: 11-5/8", B: 21-1/8", C: 10-3/4", D: 21", For a new version of this item use Item #: 110308, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410308)$27.78
Cab Glass - Lower Right Hand Windshield, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 109132C2, A: 11.625", B: 21", C: 10-3/4", D: 21-1/4", For a new version of this item use Item #: 112613, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412613)$20.01
Cab Glass, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 109318C2, A: 45-3/4", B: 26", C: 50-1/2", D: 26", For a new version of this item use Item #: 108545, Item ships via freight carrier, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408545)$279.01
No Picture
Cab Glass - Windshield Upper, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 109133C3, A: 45", B: 31-3/4", C: 50-1/4", D: 31-3/4", For a new version of this item use Item #: 112083, Item ships via freight carrier, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435201)$329.01
Cab Headliner - 1-Piece - Black For 86 Series, 88 Series, Hydro 186. Must ship Truck Freight (Item #: 112740, Ref: R1221)$332.00
Cable, Hydraulic Auxiliary Valve Flow Control, 139027C2 - For International / Farmall tractor models Hydro 186 (s/n 12000-earlier), 986 (s/n 24000-27999), 1086 (s/n 48000-54999), 1486 (s/n 26000-29149), 1586 (s/n 210000-earlier), 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 139027C2, Total length: 20-1/2", (Item #: 161890)$18.40
No Picture
Floor Mat Kit - For 86 Series, 3388, 3588, 3788 (Item #: R0139)$97.01
No Picture
Foam Seal Kit - For International / Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Includes Foam Piece and Seal for Cab Roof, Length: 31", Width: 18", Thickness: 1", (Item #: 176882)$72.00
Gear Pump Conversion Kit less Pump - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, This kit is used to convert Power Priority (Piston pump) to Constant Displacement (Gear pump), (Item #: 117444)$1579.01
Lower Front Cab Panel - Right Hand, Used - For International tractor models Hydro 86, 786, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, Replaces International OEM number 117747C2, For a new version of this item use Item #: 108544, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408544)$31.01
Main Headliner, Black Basketweave Vinyl - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Color: Black Basketweave, Included Cans of Adhesive: 1, Material: Perforated Vinyl (18%), Pieces: 2, (Item #: 168842)$206.00
Motor Control Valve Closed Center, Used - For International tractor models Hydro 186, 986, 1086, 1486, 1586 (s/n 21000-later), 3588, 3688, 4100, 6388, 6588, 6788, Replaces International OEM nos 123032C94, 123032C91, 123032C92, 123032C93, Has 3 plugs on top side of valve, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497478)$250.01
Park Pawl, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 139141C1, 384094R2, For a new version of this item use Item #: 113420, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413420)$119.01
Pilot Relief Valve - 2300 PSI - For International / Farmall tractor models Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 396729R93, 2300 psi, (Item #: 154339)$163.00
Pilot Relief Valve - 2500 PSI - For International / Farmall tractor models Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 543976R91, 2500 psi, (Item #: 154336)$140.00
Pilot Relief Valve, Used - For International tractor models Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 543976R91, 2500 PSI, For a new version of this item use Item #: 154336, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498629)$89.01
No Picture
Range Transmission Cover Tool - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 398298R41, (Item #: 176774)$132.00
No Picture
Selector Spool Nut with Lip Seal - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, Stops oil leaks from the MCV selector spool shaft, Lip type oil seal, (Item #: 176777)$52.00
No Picture
Shifter Control Arm Repair Kit, Used - For International tractor models 756 (1968-1971), 766 (s/n 17047-earlier), 786, 856 (1968-1971), 886, 966 (s/n 32222-earlier), 986, 1026 (1968-1971), 1066 (s/n 57646-earlier), 1086, 1256 (1968-1971), 1456 (1968-1971), 1466 (s/n 30000-ealier), 1468 (s/n 1305-ealier), 1486, 1566 (s/n 1305-ealier), 1568, 1568 (s/n 7994-ealier), 1586, 3088, 3288, 3388, 3444, 3488, 3514, 3588, 3616, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 380115R2, 398300R1, 398304R1, Contains Arm, Roller, Spring, For a new version of this item use Item #: 111858, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435570)$47.01
No Picture
Speed Transmission Control Arm Kit, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 382565R21, 380115R2, 383997R1, Includes control arm, roller and spring, For a new version of this item use Item #: 113499, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435622)$27.01
No Picture
Torque Amplifier Pressure Isolator - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, Used to isolate torque amplifier pressures between the torque amplifier circuit and the MCV circuit, Installation: (1) Remove selector spool nut and spool, (2) install isolating rod (threaded end up) and nut, Diagnostic: With isolator installed start tractor and read lube pressure. (1) Lube pressure comes up to normal operating pressure (a leak in the torque is robbing lube oil), (2) Problem with the lube oil still exists (problem is in lube circuit or MCV or TA), (Item #: 176779)$80.00
No Picture
Torsion Bar Bracket, Used - For International tractor models 1086, 1206, 1256, 1456, 1486, 1586, 3388, 3488, 3588, 3788, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 392086R31, 392086R11, 401363R3, 401363R1, 401362R3, 401362R, 401363R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445514)$193.01
Weather Strip Door Seal - Left Hand - For International / Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces Case IH OEM number 109595C1, Fits Left Hand Side, (Item #: 162543)$76.00
Weather Strip Door Seal - Right Hand - For International / Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces Case IH OEM number 109596C1, Fits Right Hand Side, (Item #: 162544)$62.00
Weather Strip Seal - Rear and Quarter Windows - For International / Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 1263038C1, 64518C1, Comes in a 31' roll, cut to fit, Fits Right Hand Side and Left Hand Side quarter cab side windows and rear cab window, (Item #: 160174)$115.00
Oil System
Engine Oil Pan, Used - For International tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, Compatible with International Engine(s) D414, DT414, D436, D466, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C, Replaces International OEM nos 671826C91, B96410, Drain plug is in center of base, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433168)$355.01
Oil Filter - Oil filter element, spin on type. Approximate diameter 7.17 inch height, 3.69 inch outside diameter. For diesel engines: D282. D312, D and DT414, D and DT 436, D and DT466. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 2656, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 5088, 5288, 5488, 6388, 656, 6588, 666, 6788, 686, 7288, 7488, 815, 85, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 111132, Ref: A184775)$15.20
Oil Inlet Tube, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 382353R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444173)$12.01
Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B)$8.50
Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A)$1.80
IPTO Driven Shaft, Used - For International tractor models 1566, 1568, 1586, 3588, 3788, 6588, 6788, Replaces International OEM nos 67754C1, Length: 33 3/4", Splines: 15, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434844)$129.01
PTO Driven Gear, Used - For International tractor models 1586, 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM nos 104400C1, Teeth: 58, Splines: 15, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499190)$220.01
No Picture
PTO Driven Shaft Bearing Retainer, Used - For International tractor models Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4166 (s/n 11100-later), 4186 (s/n 11100-later), 6388, 6588, 6788, Replaces International OEM nos 67757C1, Use with Gear 68511C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434845)$20.01
PTO Extension Shaft, Used - For International tractor models 1566, 1568, 1586, 3588, 3788, 6588, 6788, Replaces International OEM nos 68122C1, Length: 18 3/8", Splines: 15 and 15, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497167)$110.01
PTO Front Bearing Retainer Seal - This seal is used on International Tractors: 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 6388, 6588, 6788 (Item #: 166328, Ref: 67761C1)$4.20
PTO Shaft, 540 RPM - 13 tooth front splines, 10.815 inch long. For tractor models (706, 806, 826, Hydro 100, Hydro 186, 1026 all from 1962 with single speed PTO), (756, 766, 786, 856, 886, 966, 986, 1066, 1086 all from 1962 with single or dual speed PTO), 1206, 1468, 2706, 2806, 2826, 21206, 21026, (1256, 1456, 1466, 1486, 2756, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456 all with dual speed PTO). Replaces 393111R2, 393111R1 (Item #: 107272, Ref: 393111R2)$90.00
PTO Shaft Bearing - This Bearing is used with 405182R1-R, 528676R1, 104401C1 PTO shafts. 55mm ID x 100mm OD x 21mm W. HYDRO 100, 1066, 1086, 1466, 1468, 1486, 1586, 3388, 3588, 3788, 4166, 4186, 6388, 6588, 6788, 766, 786, 886, 966, 986. Replaces 70227C91, N1211 (Item #: 155911, Ref: 70227C91)$71.00
PTO Shaft Oil Seal - This seal fits the following tractor models as a PTO shaft oil seal: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Hydro 186, Hydro 70, and Hydro 86. Replaces part numbers: 213712, 381480R1, 381480R91, 534917R91, 634036, and 80634036. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. (Item #: 109957, Ref: 8N7052A)$8.50
Seats
No Picture
Arm Rests - Pair - Black vinyl on steel. For tractor models 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3594. (Item #: 178442, Ref: R1032)$381.00
No Picture
Arm Rests - Pair - Red fabric on steel. For tractor models 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3594. (Item #: 182191, Ref: R1035)$381.00
No Picture
Seat Back - Black fabric on steel. For 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3594. Replalces A45571, A49521, 180918C1, 142887C1 (Item #: 110222, Ref: R1040)$176.00
No Picture
Seat Back - Brown fabric on steel. For 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3594. (Item #: 178484, Ref: R1037)$265.00
No Picture
Seat Bottom - Black vinyl on steel. For 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3594. (Item #: 178506, Ref: R1030)$289.00
No Picture
Seat Bottom - Red fabric on steel. For 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3594. (Item #: 109344, Ref: R1033)$176.00
Sheet Metal / Body Parts
No Picture
4th Step - For International / Farmall tractor models Hydro 86, Hydro 100, 706, 756, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 3388, 3588, 3788, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide, 6" deep, Comes primered (color may vary). Prior to painting check fitment, 4th Step Works with Step Kit use Item #: 110951, (Item #: 114430)$85.00
Cab Headliner Kit - Main headliner, 4-piece set, black basket weave. For: Hydro 186, Hydro 3488, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788 7288, 7488. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 109454, Ref: CHIH86)$155.00
Cab Mount Insulator - For tractor models 1086, 1486, 1586, 186 Hydro, 3388, 3588, 3788, 786, 886, 986. 2 bolt Cab Mount Insulator. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 113181, Ref: 117722C4)$40.00
Glass, Cab Door, LH, RH - Cab Glass Door is for right or left side fitting models 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 786, 986, Hydro 186. Due to the size of this part, $22 addtional shipping is required. This will be added to the shipping total of your order. (Item #: 109772, Ref: 109584C2)$70.00
No Picture
Grab Handle Set - For International / Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Includes right and left hand sides, (Item #: 108126)$69.98
Grab Handle Set - For International / Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Left and right grab handles, Silver finish, (Item #: 168046)$103.82
Grille - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 127514C1, 1258365C1, (Item #: 127201)$475.00
Handrail - Left Hand - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, Easy to install with no holes to drill and hardware is included, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, For step unit use Item #: 114435, (Item #: 108822)$72.00
No Picture
Handrail - Right Hand - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, Easy to install with no holes to drill and hardware is included, To be used with step kit (s): 114436, 114442, Fits Right Hand Side, Comes primered (color may vary). Prior to painting check fitment, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114437)$82.87
Rear Light Panel - Right Hand, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 111563C2, 111563C1, Fits Right Hand Side, For a new version of this item use Item #: 125334, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437144)$45.01
Rear Quarter Glass - A= 13.625 inch, B= 30.250 inch, C= 17.875 inch, D= 31.00 inch. Tinted Safety Glass. For tractor models (Hydro 186, 786, 986, 1086, 1486, 1586, 3388, 3588, 3788 all with cab serial number up to 107806). (Item #: 109281, Ref: 109319C2)$40.00
Rear Quarter Glass - A= 13.375 inch, B= 32.00 inch, C= 17.875 inch, D= 32.750 inch. For tractor models (Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3388, 3588, 3688, 3788 all with cab serial number 107807 and up), 3088, 3288, 3488, 5088, 5288, 5488, 6388, 6588, 6788. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 109286, Ref: 1250436C2)$52.00
Step Unit - For International / Farmall tractor models 3388, 3588, 3788, Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Hand Rail- Left Hand use Item #: 114438, (Item #: 114435)$382.87
Step Unit - For International / Farmall tractor models 3388, 3588, 3788, Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, , Hand Rail - Right Hand use Item #: 114439, (Item #: 114436)$268.58
Step Unit - Left Hand - For International / Farmall tractor models 1086, 3288, 3388, 3488, 3588, 3688, 3788, 5288, 6388, 6588, 6788, 7288, 7488, Left Hand Step, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Step protrudes 26" from the cab door, Handrail not included, Comes primered (color may vary). Prior to painting check fitment, Handrail - Left Hand use Item #: 114438, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108823)$436.00
Step Unit - Left Hand - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Step protrudes 20" from the cab door, Comes primered (color may vary). Prior to painting check fitment, Handrail-Left Hand use Item #: 114438, Additional Handling and Oversize Fees Apply To This Item, (Item #: 110951)$340.00
Step Unit - Right Hand - For International / Farmall tractor models Hydro 186, 1086, 1486, 1586, 3388, 3588, 3788, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Step protrudes 20" from the cab door, Comes primered (color may vary). Prior to painting check fitment, Handrail-Right Hand use Item #: 114430, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114442)$368.58
No Picture
Tractor Mirror Assembly with Extendable Arm - Left Hand or Right Hand - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Fits Left Hand or Right Hand Side, 8" x 11" wide-angle convex mirror head, Mirror length of 22" to 36", Easily adjustable and extendable 14", Powder coat finish, All hardware included, Detailed installation instructions included, Collapsible mirror bracket helps reduce mirror and light breakage, Collapsible both forward and backward, For Replacement Mirror Head use Item #: 161118, Additional Handling and Oversize Fees Apply To This Item, (Item #: 110083)$236.00
Windshield Glass, Lower, LH - For tractor models Hydro 186, 786, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 110308, Ref: 109131C2)$45.00
Windshield Glass, Upper - For tractor models Hydro 186, 786, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112083, Ref: 109133C3)$405.00
Steering
Axle Clamp Bolt and Nut - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 5088, 6388, 6588, 6788, 21456, Replaces International OEM number 539827R2, 539827R1, With Nut, 6.50" Long, 7/8" - 14 UNF, (Item #: 111420)$26.00
No Picture
Axle Clamp Bolt and Nut, Used - For International tractor models Hydro 100, Hydro 186, 766, 786, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 5088, 6388, 6588, 6788, 21456, Replaces International OEM number 539827R2, 539827R1, With Nut, 6.50" Long, 7/8" - 14 UNF, For a new version of this item use Item #: 111420, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435554)$15.72
Bull Pinion and Brake Shaft - Left Hand, Used - For International tractor models 786, 886, 986, 3088, 3288, 3388, 3588, 3688, 6388, 6588, Replaces International OEM nos 104677C1, Splines: 12/13/14, Internal Splines: 18, Left hand shaft for tractors with differential lock, Overall Length: 13.188", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437503)$600.01
Bull Pinion and Brake Shaft - Right Hand, Used - For International tractor models Hydro 186, 886, 986, 3388, 3588, 3688, 6388, 6588, Replaces International OEM nos 104702C1, Right hand shaft for tractors with differential lock, Splines: 12/13/16, Overall Length: 14", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437508)$660.01
Bushing - Steering Pump Reducer - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, Reducer bushing if suction hose to filter housing fitting measures 2.475" O.D. to bring it to 1.875"-12, (Item #: 123459)$183.00
Differential Assembly, Used - For International tractor models Hydro 186, 766, 786, 886, 966, 986, 1066, 3088, 3288, 3388, 3588, 6388, 6588, Replaces International OEM nos 529023R2, 529023R1, Replaces Casting nos 380188R2, 529024R2, 524705R1, Splines: 14, Bearing inside diameters 3.250" and 3.063", Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432701)$690.01
Differential Bevel Gear, Used - For International tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 4568, 4586, 4786, 6388, 6588, 6788, Replaces International OEM nos 380190R2, Teeth: 28, Splines: 14, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431512)$107.01
Power Steering Manifold Block, Used - For International tractor models Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1586 (s/n 12955-earlier), 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 537841R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434258)$36.01
Rear Housing Overhaul Gasket Set - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388 (s/n 10490-earlier, Does not include Pump drive Housing Gasket), 3588 (s/n 130114-earlier, Does not include Pump Drive Housing Gasket), 3788 (s/n 9786-earlier, Does not include Pump Drive Housing Gasket), Replaces International OEM number 386683R96, (Item #: 168749)$182.00
No Picture
Ring Gear and Pinion Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, Replaces International OEM number 135770C2, 528684R91, 528707R93, 395828R1, Kit Includes: Ring Gear and Pinion, Lock Plate, Nut, Shim (.004"), (2) Shims (.007"), and Bearing and Retainer Assembly, For Bearing and Retainer Kit use Item #: 160584, (Item #: 177076)$2489.01
Ring Gear and Pinion, Used - For International tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 528707R93, 120265C91, 120265C92, 395828R91, 528707R92, 528707R91, 534307R91, Replaces International Casting nos 528708R1, 529284R2, 536171R, 13 and 51 teeth, Includes: Ring Gear and Pinion, For a new version of this item use Item #: 160584, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497984)$400.01
Sleeve Assembly - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 142137C2, (Item #: 155183)$279.00
Sleeve Assembly, Used - For International tractor models 3388, 3588, 3788, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 142137C2, For a new version of this item use Item #: 155183, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497406)$278.01
No Picture
Steering Pump Conversion Kit, 1272916C91 - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, Replaces International OEM number 1272916C91, Converts from piston pump to gear pump, Includes: pump, hoses, fittings (may require reducer bushing (123459) if suction hose to filter housing fitting measures 2.475" O.D.), (Item #: 123456)$1439.01
Steering Pump - Gear Style - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, For tractors that have been converted from piston to gear pumps, (Item #: 123457)$1159.01
Dual Hub - U Bolt, Used - For International tractor models Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1206, 1256, 3288, 3388, 3588, 3688, 3788, 4366, 4386, 6388, 6588, 6788, Replaces OEM nos 81EM7, Please Measure Axle Diameter and Axle Length, Diameter: 3 1/4 (82.55mm), 1 1/8" U Bolts requires 2, Hub Length: 7", Cap Screws: 5/8", 9 Bolt, Aftermarket, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 463882)$325.01
Rear Wheel Hub Clamp, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 6388, 6588, 6788, 21026, 21206, 21256, Replaces International OEM nos 68806C1, Replaces International Casting nos 380863R2, Does not include bolts, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496993)$79.01
Rear Wheel Plate Assembly Package, Used - For International tractor models Hydro 100, Hydro 186, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 2756, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, Replaces International OEM nos 536022R92, 535561R1, 535559R2, 535557R2, 535546R1, Package includes: (2)53561R1, 535559R2, 535557R2, (2)535546R1, Does Not Include: 535409R1 or 529959R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432545)$245.01
Rear Wheel Wedge Kit - 3.250 inch, includes 2 wedges and 1 bolt. For tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 856, 966, 986, 1026, 1066, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788. Wedges NOT sold separately. (Item #: 108777, Ref: 1287801C91)$146.00
Rear Wheel Wedge Kit, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 856, 966, 986, 1026, 1066, 3088, 3288, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 397193R2, 1287801C91, 397189R2, 2 Wedges and 1 Bolt, 3.250" Axle Only, 3 1/4", For a new version of this item use Item #: 108777, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408777)$94.01
Rim Clamp Fixed, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, 21456, Replaces International OEM nos 397251R1, 380871R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499564)$10.01
Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, Replaces International OEM number 380870R1, For a new version of this item use Item #: 157781, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499563)$10.01
No Picture
Torque Amplifier Shaft Oil Slinger - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, Replaces International OEM number 8301011, This oil slinger will help to reduce clutch failures caused by the TA leaking into the clutch housing that is common with tractors that continue to operate with well-worn Torque Amplifiers, The slinger is installed on the TA shaft in front of the TA bushing and helps deflect excess oil coming out of the TA away from the PTO gear seal, (Item #: 176790)$48.00
Wheel Clamp Bolt - Rear Rim - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 393772R1, For Nut use Item #: 157781, (Item #: 157779)$8.00
Universal Parts and Accessories Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127)$365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153)$100.55
Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826)$16.10
Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174)$2.00
Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175)$3.90
Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176)$5.10
Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177)$14.40
Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178)$7.70
Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179)$16.90
Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180)$12.70
Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181)$15.10
Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182)$14.40
Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183)$25.90
International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679)$9.60
International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680)$12.70
International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681)$16.90
International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682)$15.10
International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683)$14.90
International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684)$11.20
International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685)$18.60
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE
No Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE)$84.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209)$13.10
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302)$25.20
No Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010)$53.00
Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042)$62.15
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6)$24.70
No Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85)$5.50
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425)$4.50
NOTE
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6)$15.80
Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467)$18.50
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12)$15.80
Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92)$30.00
Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR)$10.60
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C)$76.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C)$103.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C)$123.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR)$167.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C)$147.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C)$170.00
Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR)$89.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114)$3.20
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134)$4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138)$2.70
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214)$4.58
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234)$8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300)$7.30
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312)$8.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400)$8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500)$14.30
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799)$10.10
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800)$9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802)$11.10
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804)$11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807)$11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14)$14.30
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15)$18.38
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A)$6.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A)$7.40
Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231)$12.60
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949)$9.92
Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY)$27.00
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R)$3.90
Gauges
No Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837)$32.14
No Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771)$59.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672)$41.00
Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB)$46.00
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095)$14.90
Hitch / Drawbar
Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447)$338.00
Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448)$376.00
Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416)$426.00
Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417)$426.00
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X)$11.50
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2)$37.00
Hydraulic System
Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023)$25.70
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021)$15.20
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12)$11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24)$13.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30)$16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48)$16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000)$15.90
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60)$15.90
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317)$15.50
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317)$15.50
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$242.80
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215)$123.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH)$39.00
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311)$50.00
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH)$53.00
No Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP)$21.50
Lights
Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V)$44.00
Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB)$44.00
Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91)$13.70
Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R)$16.60
Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236)$379.00
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B)$245.00
Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193)$119.70
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250)$24.00
No Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_)$8.50
No Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP)$8.50
No Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL)$69.00
No Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT)$29.50
No Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL)$53.00
No Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT)$23.70
No Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL)$56.00
No Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT)$23.60
No Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP)$8.50
No Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT)$22.50
No Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP)$8.30
No Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL)$58.00
No Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT)$23.50
No Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP)$9.40
No Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL)$54.00
No Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT)$23.50
No Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP)$8.10
No Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL)$86.00
No Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT)$36.00
No Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP)$12.50
No Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL)$60.00
No Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT)$23.20
No Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP)$7.60
No Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL)$62.00
No Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT)$23.50
No Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT)$18.20
No Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP)$7.90
No Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT)$18.20
No Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP)$7.90
No Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL)$84.67
No Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL)$68.39
No Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT)$99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$47.00
PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$235.42
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
NOTE
PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.
NOTE
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$282.00
Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V)$1518.86
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V)$1518.86
Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056)$2161.57
Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599)$44.00
Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015)$38.00
Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP)$100.00
Sheet Metal / Body Parts
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140)$41.19
Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K)$178.00
Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Tools
No Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891)$24.30
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166)$100.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166)$70.00
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB)$17.15
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$47.00
Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16)$112.00
Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16)$112.00
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050)$17.50
No Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059)$56.00
No Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058)$63.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061)$111.00
No Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062)$66.00
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
