International Harvester / Farmall 4100 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Clutch
Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $7.30
Clutch Bearing and Seal Kit - Kit includes greasable release bearing N1174, pilot bearing 63042RS, inner 12363 and outer 19760 PTO seals, and o-ring 12250. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 3788, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 114543, Ref: N159763) $58.00
Clutch Bearing Seal Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, For Use With OEM Carrier, Contents: 1-832503 Release Bearing, 1-836304 Pilot Bearing, 1-535208 Inner IPTO Seal, 1-535209 Outer IPTO Seal, 1-22414 IPTO Bearing Cage O-Ring, (Item #: 108785) $61.00
Clutch / Brake Return Spring - This spring has an overall length of 4.463 inch, with a wire diameter of 0.083 inch and an outside spring diameter of 0.744 inch. Fits: [1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 706, 756, 766, 806, 826, 856, 966 (use on the following gear drive tractor when used as a clutch pedal return spring)], [4100, 4156, 4166 (use on the following model when used as a clutch pedal and brake pedal return spring)]. Replaces: 626206R1. (Item #: 164483, Ref: 626206R1) $15.00
Clutch Disc - 14 inch diameter, 1-3/16 inch hub, 11 spline. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588. (Item #: 109963, Ref: 393117R93) $225.00
No Picture Clutch Disc - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, Replaces International OEM number 394239HD, 6 Pad, 1-3/16", 11 Spline, (Item #: 166267) $167.00
Clutch Disc, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Carbotic Pads, (Item #: 205981) $156.00
Clutch Disc, Remanufactured, 142197C4 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 142197C4, 142197C4R, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 8 Lg Pads, For a New version of this sku use Item #: 204417, (Item #: 204197) $284.50
Clutch Disc, Remanufactured, 142197C4 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 142197C4, 142197C4R, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 8 Reg Pads, (Item #: 204417) $192.50
Clutch Disc, Remanufactured, 393117R93 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, Replaces International OEM number 393117R93, 393117R93R, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 204192) $179.00
Clutch Disc, Remanufactured, 393117R93 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 393117R93, 393117R93R, H393117, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 205982) $141.01
Clutch Kit - This single stage remanufactured heavy duty clutch kit contains a heavy duty remanufactured, 17 spline, 1 3/4 inch hub, 15 spring pressure plate assembly, a remanufactured, heavy duty, 6 pad, 11 spline, 1 3/16 inch hub clutch disc; new release bearing and new pilot bearing. For tractor models WITH Hydraulic Assist. For tractors: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456. (Item #: 202020, Ref: 67597K) $540.30
Clutch Kit, 14 Inch - This kit is used on tractors with Hydraulic Assist Clutches. This single stage new heavy duty clutch kit contains a heavy duty, 17 spline, 1 3/4 inch hub, 15 spring pressure plate assembly, a heavy duty, 6 pad, 11 spline, 1 3/16 inch hub clutch disc; new release bearing and new pilot bearing, clutch alignment tool. (Item #: 140639) $665.00
No Picture Clutch Kit, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (with Hydraulic Assist), Clutch Diameter - 14", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 6 Large Pads, Pressure Plate Size - 14", Pressure Plate Levers - 3, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 17, Pressure Plate Type - Single Stage, Flywheel Step 1.938", For Pressure Plate use Item #: 108078, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202011) $432.60
No Picture Clutch Kit, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (with Hydraulic Assist), Clutch Diameter - 14", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 8 Large Pads, Pressure Plate Size - 14", Pressure Plate Levers - 3, Pressure Plate Springs - 15, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 17, Pressure Plate Type - Single Stage, Flywheel Step 1.938", Additional Handling and Oversize Fees Apply To This Item, (Item #: 202021) $515.00
No Picture Clutch Kit, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (with Hydraulic Assist), Clutch Diameter - 14", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 8 Regular Pads, Pressure Plate Size - 14", Pressure Plate Levers - 3, Pressure Plate Springs - 15, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 17, Pressure Plate Type - Single Stage, Flywheel Step 1.938", Additional Handling and Oversize Fees Apply To This Item, (Item #: 205206) $412.00
No Picture Clutch Release Bearing - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Compatible with Massey Ferguson tractor models 285, 1080, 1085, 1135, 1155, 1500, 1505, 1800, 1805, Replaces Massey Ferguson OEM number 834602M1, Inside Diameter: 2.500", Outside Diameter: 4.128", Width: 0.864", (Item #: 176789) $44.00
Clutch Release Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 380110R1, For a new version of this item use Item #: 111850, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411850) $25.01
Clutch Release Shaft Kit - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 380109R1, 380110R1, 380180R12, (Item #: 113406) $246.00
Clutch Release Sleeve, Used - For International tractor models Hydro 100, 706, 756, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380109R1, For a new version of this item use Item #: 108765, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408765) $60.60
Clutch Rod Pin - For International / Farmall tractor models Hydro 100, 706, 756, 766 (s/n 7598-later), 806, 826, 856, 966 (s/n 14086-later), 1066 (s/n 17031-later), 1206, 1256, 1456, 1466 (s/n 12146-later), 1468 (s/n 7406-later), 1566, 1568, 4100, 4156, 4166, 4186, Replaces Case IH OEM number 382492R2, 382492R1, (Item #: 160845) $18.40
Pressure Plate Assembly, Remanufactured, 1251694C91 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 1251694C91, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204191) $228.50
Pressure Plate, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 30, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206055) $263.01
Pressure Plate, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 21, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, (Item #: 206057) $246.01
Pressure Plate, Remanufactured, 120181C92 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (all less hydraulic clutch assist), Replaces International OEM number 120181C92, 120181C92R, H120181, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 15, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Flywheel Step 1.938", Additional Handling and Oversize Fees Apply To This Item, (Item #: 205146) $234.50
Pressure Plate, Remanufactured, 67597C92 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (all with hydraulic clutch assist), Replaces International OEM number 67597C92, 67597C92R, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 15, Pressure Plate Hub: 1-3/4" bolted, Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Flywheel Step 1.938", Additional Handling and Oversize Fees Apply To This Item, (Item #: 206056) $216.01
PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $62.00
Release Bearing - Greasable. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3688, 3788, 400, 4100, 4156, 4166, 4186, 4366, 4386, 450, 4568, 560, 6388, 6588, 660, 6788, 706, 756, 786, 806, 826, 856, 886, 966, 986, Hydro 100, W400, W450. It has an inside diameter of 2.50 inches, an outside diameter of 4.125 inches, and is .83 inches wide. Please verify measurements before ordering. (Item #: 107274, Ref: 365867R91) $24.80

Cooling System
Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.60
Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.60
Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $21.00

Decals and Emblems
Front Emblem - Plastic "IH" red, black and white, 3-7/8 inch x 3-1/2 inch. Center to center measurement on the mounting posts is 2-17/32 inch. For tractor models 544, 656, 664, 706, 2544, 2656, 2706, 4100, 4156, 4166, 4186, 4366, 4386. (Item #: 107904, Ref: 2751848R1) $19.80
Grille Emblem - For International / Farmall tractor models 544, 656, 706, 4100, 4156, 4166, 4186, 4366, 4386, Replaces International OEM number 2751845R1, Height:4", Chrome plated die cast, (Item #: 107905) $44.00
International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.60

Drive Train
Ball Bearing - Constant Mesh and Torque Amplifier Drive Gear - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number ST3025, ST697, ST3024, ST3011, 80420C91, 80419C91, 15 Balls and Retainer, Inside Diameter: 75 mm, Outside Diameter: 130 mm, Width: 22 mm, This bearing is splash lubricated, Make sure sump has an adequate level of oil, (Item #: 168435) $29.90
Gear, Reverse Idler - 30 tooth. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 2706, 2756, 2806, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 122675, Ref: 393523R1) $273.18
No Picture PTO Drive Gear Kit, 20 Degree - For International / Farmall tractor models 706, 756 (Farmall s/n 17635-earlier and International s/n 8424-earlier), 806, 856 (Farmall s/n 27286-earlier), 1206, 2756 (Farmall s/n 17635-earlier and International s/n 8424-earlier), 2856 (Farmall s/n 27286-earlier), 4100, 4156, 4166, 4186, Replaces International OEM number 380261R1, Kit Includes: IPTO Drive Gear, IPTO Bearing Cage, IPTO Ball Bearing, Inner IPTO Seal, Outer IPTO Seal, IPTO Bearing Cage O-Ring, Spline Count: 17, Tooth Count: 28, Outside Diameter: 1-3/4", (Item #: 176731) $365.00
Reverse Idler Gear, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 393523R1, Teeth: 30 and 21, For a new version of this item use Item #: 122675, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 422675) $100.01
Shift Cam, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21026, 21206, 21256, 21456, Replaces International OEM nos 380114R22, 380114R21, 430114R20, 430114R19, 430114R18, 430114R17, 430114R16, 430114R15, 430114R14, 430114R13, 430114R12, 430114R11, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430723) $75.01
Shift Detent Plate - Transmission speed cover, comes with rivets. For tractor models 1066, 1206, 1256, 1456, 1466, 1468, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 706, 756, 766, 806, 826, 856, 966. (Item #: 173010, Ref: 830443) $40.90
Shift Detent Plate - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, Compatible with International Construction and industrial models 21206, Replaces International OEM number 830438, With Rivets, Cam Is Not Included, (Item #: 110522) $32.87
Shift Fork Assembly, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM nos 380123R21, Speed Transmission, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498620) $68.01
Spacer, Countershaft Gears - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786 (1/74-12/80), 806, 826, 856, 886 (1/74-12/80), 886, 966, 986 (1/74-12/79), 1066, 1086 (1/74-12/79), 1206, 1256, 1456, 1466, 1468, 1486 (1/74-12/79), 2706, 2756, 2806, 2856, 3088 (1/81-12/86), 3288 (1/81-12/86), 3388 (1/79-12/81), 3588 (1/79-12/81), 3688 (1/81-12/86), 4100, 4156, 4166, 4186 (1/76-12/79), 6388 (1/81-12/83), 6588 (1/81-12/83), Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 380126R2, 380126R1, (Item #: 170256) $23.98
Transmission Brake Pad and Screw - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3388, 3588, 3788, 4100, 4156, 4166, 21206, 21256, (Item #: 168453) $27.00
Transmission Countershaft Nut - For International / Farmall tractor models 706 (756), 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148952C1, 148952C2, LH Thread, (Item #: 113418) $20.10

Electrical System
Alternator - Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100. (Item #: 113606, Ref: 1100883) $120.00
Alternator - 12 volt, 55 amp. For tractor models (2826D 1970 to 1971 with 407 diesel), (2856 1968 to 1970 with 301 gas), (2856D 1968 to 1970 with 358/402 diesel), (4100D 1965 to 1968 with 429 diesel), (4156D 1969 to 1970 with 429 diesel), (6000 1969 to 1970 with 200 gas/239 diesel), (210, 225 1967 to 1971 with 153 gas/206 diesel), (230 1968 to 1971 with 153 gas), (275 1967 to 1971 with 153 gas), (275D 1967 to 1971 with 206 diesel), (375 1967 to 1971 with 175 gas), (375D 1967 to 1971 with 206 diesel). Replaces 1100805, 1100883, 1100791, 1100778, 1100720, 1100771. (Item #: 113606, Ref: ADR0231) $120.00
Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $10.90
Key Switch, 2 Terminal - With keys. For tractor models 3444, 3514, 3616, 4100, 4156, 4166, 4186, 4366, 4386, 615, 715, 815, 915. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.00
Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $28.60
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.60
Starting Button - Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Item #: 112232, Ref: A36948) $7.60
Starting Button - Attaches with spade terminals. For tractor models 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.60
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.00

Engine Bearings
Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models 4100, 4156, 4568, 4586, 4786, 7588, 7788, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106554, (Item #: 106552) $51.00
Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models 4100, 4156, 4568, 4586, 4786, 7588, 7788, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106554, (Item #: 106553) $77.00
Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models 4100, 4156, 4568, 4586, 4786, 7588, 7788, Sold per journal, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106553, (Item #: 106554) $71.00
Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models 4100, 4156, 4568, 4586, 4786, 7588, 7788, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106554, (Item #: 106551) $16.98
Main Bearings - Standard - Journal - For International / Farmall tractor models 4100, 4156, Sold per journal, Bearing Size: Standard, (Item #: 106636) $43.98
Outer IPTO Gear Seal - For International / Farmall tractor models 4100, 4156, 4166, 4186, Replaces International OEM number 535209R92, For Inner IPTO Gear Seal use Item #: 158865, (Item #: 158871) $8.90
Range Cover Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380315R2, 380315R1, Length: 14-3/8", Width: 8", (Item #: 166208) $8.20
Release Bearing Carrier - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380109R1, 69789C1, I.D.: 2.500", O.D.: 4.154", Thickness: .865", (Item #: 112251) $119.00
No Picture Transmission Gear Shift Cover Gasket - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, Replaces International OEM number 380112R2, (Item #: 173861) $8.90

Engine Gaskets
Conversion Gasket Set - For International / Farmall tractor models 4100, 4156, Compatible with International Engine (s) DT429, Engine: DT429, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 106731) $260.00
Front Crankshaft Seal - For International / Farmall tractor models 4100, 4156, Compatible with International Engine (s) DT429, (Item #: 106649) $30.10
No Picture Head Gasket Set - For International / Farmall tractor models 4100, 4156, Compatible with International Engine (s) DT429 (Diesel), Contains all gaskets necessary to replace the cylinder head (valve seals not included), (Item #: 106696) $491.00
No Picture Rear Crankshaft Seal and Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 2856, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 2349-earlier), 1440, 1460, 1480 (s/n 24000-earlier), Compatible with International Construction and industrial models TD15B, 175, Neoprene style, (Item #: 176971) $142.00

Engine Rebuild Kits
Rear Main Seal Sleeve and Seal Installer - Used to install both the seal and sleeve at the same time, this tool is used with 106660 Seal and Sleeve set. (Item #: 122044) $263.00

Engine Parts
Cam Plate - For International / Farmall tractor models 706, 806, 1206, 4100, 4156, 4166 (all with HI-LO Transmission), Replaces International OEM number 380306K, Range cover shift cam detent with rivits., Used on 380306R51 (113404), (Item #: 151115) $27.00
No Picture Cam Retaining Coupler - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 21206, 21256, 21456, Replaces International OEM number 380117, Includes: 2 Grooved Pins, (Item #: 176730) $73.00
No Picture Crankshaft, Remanufactured, 349344R21 - For International / Farmall tractor model 4100, Compatible with International Engine (s) DT429, Replaces International Casting number 349344R21, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 210145) $870.01
No Picture Cylinder Head, Remanufactured, 345129R - For International / Farmall tractor models 4100, 4156 (Diesel), Replaces International Casting number 345129R, 323939R, Engine 429, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200221) $790.01
Driving Gear - 1st, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 4100, 21206, 21256, Replaces International OEM nos 390259R1, Teeth: 27, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438717) $50.01
Forward Reverse Shift Collar, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 393524R1, 380302R1, 3.61" Dia., Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498210) $40.01
Hi Lo Shift Collar, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 393521R1, Diameter: 5.05", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498208) $95.01
Range Transmission Shift Cam - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, 21206, Replaces International OEM number 380306R51, (Item #: 113404) $207.00
Ring Gear, Flywheel - This Flywheel Ring Gear has 132 Teeth, 16.685 inch outside diameter, 15.490 inch inside diameter, 0.875 inch width. It is used on 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 21206, 21256, 21456, 3388, 3588, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788. D361 Eng, D407 Eng, D414 Eng, D436 Eng, DT361 Eng, DT407 Eng, DT414 Eng, DT429 Eng, DT436 Eng. Replaces 326759R1 (Item #: 103902, Ref: 326759R1) $106.00
Shift Cam, Used - For International tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, 21206, Replaces International OEM number 380306R51, 380306R, Replaces OEM 380306R11 - 380306R50, For a new version of this item use Item #: 113404, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434905) $128.01
Shift Rail, Used - For International tractor models 706, 756, 766, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 380122R1, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430720) $27.01
Transmission Countershaft, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148951C1, 148951C, Tubular, LH Thread, Early SN 66 and prior models requires spacer 71147C1, 71147C2, For a new version of this item use Item #: 113419, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497400) $179.01
Transmission Drive Shaft, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 380076R4, 380076R1, 380076R2, 380076R3, Teeth: 26, Splines: 11, For a new version of this item use Item #: 162945, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499217) $200.01

Engine Rings
Piston Ring Set - Standard - 2 Cylinder - 3 Sets Required - For International / Farmall tractor models 4100, 4156, Compatible with International Engine (s) DT429 (3 Sets Required), Bore: 4.500", Compression Rings per Cylinder: 1 @ .125" and 2 @ .094”, Oil Rings per Cylinder: 1 @ .250", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chromed Cast Iron / Coiled Spring, Sold as a 2 Cylinder set – 3 sets required for DT429, (Item #: 128998) $268.00

Exhaust System
Turbocharger with Gaskets - This Turbo Charger comes with gaskets. It is used on tractors using TO4B18 and TO4B25 Air Research style turbos. Fits Engines: 451B, 451BDT DT414, DT429, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C. Replaces OEM numbers A184785, 749267C92, 684240C92, 702300C91, 409570-9016, 409570-5016, TO4B18, TO4B25, A43361, A157335, A43360, A44052, A48190, A66770 (Item #: 101148, Ref: 749267C92) $360.00

Fuel System / Air Intake
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple International/Farmall models. Replaces: 383734R2, 625043C1. (Item #: 121925, Ref: T23262) $6.30
Throttle Handle - This Throttle Handle comes with Nickel Plated Plug. Red with black handle and nickel plug (1 inch plug diameter) 11.25 inches long, 1-3/8 inches wide, 1-7/8 inches thick, 1/2 inch diameter shaft, 1/8 inch pin slot. Fits: 1206, 21206, 2706, 2806, 4100, 4156, 4166, 4186, 656, 706, 806; Replaces: plug: 192105, 382682R1, handle: 391666R1. (Item #: 179411, Ref: 391666R1) $139.00

Gaskets
Seal and Bushing Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, All TA Tractors, (Item #: 168459) $25.70

Hitch / Drawbar
Pin, Front Drawbar - 1" pin diameter, 2.50" usable length, 3.120" overall length, 1.50" head dia. For tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, (4100, 4156, 4166, 4186 thid id drawbar support arm pin for these models), 2544, 2656. (Item #: 170296, Ref: 439-51644) $1.98
Top Link Pin - Replacing OEM part numbers 1286040C5, 1286826C2, 1286840C7, 392208R12, P6840, this top link pin has a diameter of 1.25 inches. It is used on the following models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206 Indust/Const, 21256 Indust/Const, 21456 Indust/Const, 3388, 3588, 3788, 4100 Indust/Const, 4166, 4186, 5088, 5288, 5488, 6388, 6588, 6788, 7110, 7130, 7210, 7230 (Item #: 108553, Ref: 1286840C7) $30.98

Hydraulic System
Hydraulic Pump Drive Gear - Used on Farmall / IH models: 706, 756 (serial number Farmall 17635-earlier, International 8424-earlier), 856 (serial nuber Farmall 27286-earlier, International 9492-earlier), 1206, 1256, 2706, 2756 (serial number Farmall 17635-earlier, International 8424-earlier), 2806, 2856 (serial number Farmall 27286-earlier, International 9492-earlier), 4100, 21206, 21256. This Gear has 19 teeth and 20 degree pitch to the teeth. Replaces 382332, 382332R1 (Item #: 173027, Ref: 382332R1) $156.00
Remote Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 404, 504, 544, 606 (s/n 6754-later), 656, 664, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, 2404, 2504, 2544, 2606 (s/n 6754-later), 2656, 2706, 2756, 2806, 2826, 2856, 4100, 21206, 21256, Replaces International OEM nos 390826R94, 390826R91, 390826R92, 390826R93, Open on 1 side only, 1500 psi to 2000 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496748) $450.01

Lights
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.00
Light Switch, 12 Volt - For tractor models (Cub serial number 224401 to 227700), (Cub Lo-Boy serial number 18701 to 21575), (140 from serial number 26801 and up), 1206, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, 354, 404, 424, 444, 454, 464, 504, 574, 606, 674, 706, 806, 1256, 2300, 2400A, 2404, 2424, 2444, 2500A, 2504, 2606, 21256, 3444, 4100, 4156, 403. (Item #: 125705, Ref: 376851R91) $31.00
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50
Switch, Light - Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908).376851R92 (Item #: 125705, Ref: 376851R91) $31.00

Miscellaneous
Hydraulic Pump Drive Gear, Used - For International tractor models 706, 756 (s/n Farmall 17635-earlier, International 8424-earlier), 856 (s/n Farmall 27286-earlier, International 9492-earlier), 1206, 1256, 2706, 2756 (s/n Farmall 17635-earlier, International 8424-earlier), 2806, 2856 (s/n Farmall 27286-earlier, International 9492-earlier), 4100, 21206, 21256, Replaces International OEM number 382332R1, Teeth; 19, Teeth Pitch: 20 degrees, For a new version of this item use Item #: 173027, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430256) $55.01
MCV Relief Valve - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2856, 3088, 3288, 3488, 3688, 4100, 4156, 4166, 4186, 5088, 5288, 5488, 21206, 21256, 21456, Replaces International OEM number 384443R92, 384443R91, (Item #: 154335) $137.07
Motor Control Valve Closed Center, Used - For International tractor models Hydro 186, 986, 1086, 1486, 1586 (s/n 21000-later), 3588, 3688, 4100, 6388, 6588, 6788, Replaces International OEM nos 123032C94, 123032C91, 123032C92, 123032C93, Has 3 plugs on top side of valve, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497478) $250.01
Park Pawl, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 139141C1, 384094R2, For a new version of this item use Item #: 113420, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413420) $119.01
Pilot Relief Valve - For International / Farmall tractor models Hydro 100, 454, 574, 656, 766, 806, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 2400A, 2500A, 2656, 2806, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Replaces International OEM number 388208R93, 388208R91, 388208R92, 2000 psi, (Item #: 154338) $183.00
Pilot Relief Valve, Used - For International tractor models Hydro 100, 454, 574, 656, 766, 856, 966, 1026, 1066, 1456, 1466, 1468, 2400, 2500, 2656, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 388208R93, 2000 PSI, For a new version of this item use Item #: 154338, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498628) $113.71
No Picture Speed Transmission Control Arm Kit, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 382565R21, 380115R2, 383997R1, Includes control arm, roller and spring, For a new version of this item use Item #: 113499, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435622) $27.01

Oil System
Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10
Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

PTO / Driveline
Independant PTO Bearing Cage, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 380101R2, For a new version of this item use Item #: 123110, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 423110) $30.01
Internal PTO Shaft - 1 3/4 inch diameter, 17 spline, 28 teeth, 20 degree tooth angle. Check degree of angle on gear teeth BEFORE ordering. For tractor models 1206, (2756 farmall serial number up to 17635 and IH serial number up to 8424), (2856 farmall serial number up to 27286 and IH up to serial number 9492), 4100, 4156, 4166, 4186, 706, Farmall 756 (to serial number 17635), International 756 (to serial number 8424), 806, Farmall 856 (to serial number 27826) (International 856 up to serial number 9492), 1400. (Item #: 108817, Ref: 380261R1) $80.00
PTo Disc - This PTO Clutch Disc has an inside diameter of 4 inches (102mm) with 51 teeth, outside diameter of 5 5/16 inches (135mm) Replaces 381490, 381490R4, 111357, 1277392C1, 1712-4422, 17124422, 1997688C1, 381490, 381490R3, 381490R4 (Item #: 111357, Ref: 381490R1) $6.70
PTO Driven Gear, Used - For International tractor models 706 (Farmall s/n 26385-later, International s/n 4232-later), 756 (Farmall s/n 17635-earlier, International s/n 8424-earlier), 806 (Farmall s/n 19710-later, International s/n 4954-later), 856 (Farmall s/n 27286-earlier, International s/n 9492-earlier), 1206, 1256, 2706 (Farmall s/n 26385-later, Intenational s/n 4232-later), 2756 (Farmall s/n 17635-earlier, International s/n 8424-earlier), 2806 (Farmall s/n 19710-later, International s/n 4954-later), 2806 (Farmall s/n 27286-earlier, International s/n 9492-earlier), 4100, 21206, 21256, Replaces International OEM nos 391828R1, Teeth: 58, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430761) $210.01
PTO Drive Shaft Bearing Cage - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 966, 986, Hydro 100. (Item #: 172679, Ref: 384079R2) $211.00
PTO Drive Shaft Bearing Retainer, Used - For International tractor models Hydro 100, 706, 756, 766 (s/n 11780-earlier), 806, 826, 856, 966 (s/n 17001-20613), 1066 (s/n 30176-earlier), 1206, 1256, 1456, 1466 (s/n 18131-earlier), 1468 (s/n 9546-earlier), 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166 (s/n 11099-earlier), 4186 (s/n 11099-earlier), 21206, 21256, 21456, Replaces International OEM nos 380107R1, Use with Independent Gears: 528677R1, 67594C1 and 68512C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435045) $36.01

Seats
Seat Adjustment Handle - For the following models: Hydro 100, 460, 504, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186. Replaces 372738R91, 372739R91, 373656R91, and 380725R91. (Item #: 105324, Ref: 1016119M91) $28.00
Seat Assembly - Black and white vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 101273, Ref: R1139) $602.87
Seat Assembly - Black vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 178440, Ref: R1140) $940.00
Seat Assembly - Black fabric on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 182099, Ref: R1141) $829.00
Seat Back - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127287, Ref: R3662) $213.00
Seat Bracket Set - Heavy gauge powder coated steel mounting brackets specifically designed for our IH6012 replacement cushion set. This bracket set replaces part numbers 387172R1, 387173R1, 387178R1. Hardware included. (Item #: 101255, Ref: IH6013) $56.00
Seat Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Compatible with International Hay Cutting(s) 275, 375, Replaces International OEM nos 379321R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431196) $31.01
Seat Cushion Set - Black and white leatherette upholstery. Kit contains seat, lower and upper backrest. For tractor models 70, 86, 504, 544RC, 574, 606, 656 before serial number 14500, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504, 2706, 2756, 4100, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $144.00
Seat Cushion Set - Seat cushion kit, black and white. Contains seat cushion, lower backrest and upper backrest. For tractors: Hydro 70, Hydro 86, Hydro 100, 504 Deluxe, 544 row crop, 656 prior to serial number 145000, 666, 686, 706, 756, 786, 806 prior to serial number 14500, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504 Deluxe, 2706, Deluxe, 2756 Deluxe, 4100, 4156, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $144.00
No Picture Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00
Seat, Shock Absorber - For tractor models 460, 504, 544, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, 2504, 2544, 2706, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 414 Cotton Picker, 420 Cotton Picker. Replaces 372751R91, IHS646. (Item #: 105342, Ref: 400072) $56.00
Spring Seat, Rubber - For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 460, 504, 544, 560, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1468, 1568, 4100, 4156, 4166, 4186, 656, 660, Hydro 100, Hydro 70, Hydro 86. Some of these models have a different seat (earlier version) that the left and right springs are different pin configurations and the center shaft has a collar that sticks up above the rubber..... These are not available. (Item #: 101285, Ref: 380712R1) $34.00
Upper Backrest Plate, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574, 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 387178R1, For a new version of this item use Item #: 109563, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409563) $21.66

Steering
Steering Wheel - For Late 140, 240, Farmall 300 (not utility), 340, 350, 400, 404, 424, 444, 450, 460, 560, 4100, 4166, 4186. Steering Wheel 18 inch diameter, 7/8 inch 36 splined hub. Replaces OEM part number 366557R1, 366557R2, 366557R91. (Item #: 101431, Ref: R3217) $42.00
Steering Wheel - With 7/8 inch splined hub. For tractor models 140, 350, 404, 424 without power steering, 444 without power steering, 450, W450, 460, 504, 560, 2404, 2424 without power steering, 2444 without power steering, 4100, 4156, 4166, 4186, Combines: 105, 203, 205 to serial number 1289. Steering wheel 17 3/8 inch diameter, 7/8 inch hub, for splined shaft. Does not come with center cap. (Item #: 101431, Ref: 366557R2) $42.00
Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $60.00
Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $49.98
Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.50
No Picture Tie Rod End, Inner - Left Hand - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384005R91, 3.75" Long, 1" Diameter, 16 Left Hand Thread, (Item #: 100873) $19.00
Universal Parts and Accessories Category: Accessories / Supplies

Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.87
Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.10
Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.60
Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.90
Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80
Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.50
Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.10
Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.10
Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60
Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80
Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.90
Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.00
Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.40
Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.40
Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.30
Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.60
Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.00
Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.10
International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.30
International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.30
International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.40
International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.60
International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.90
International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $11.20
International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $18.60

Electrical System
NOTE Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.	NOTE
No Picture Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20
No Picture Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90
Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70
No Picture Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20
NOTE Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!	NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80
Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80
Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $27.00

Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00
Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10
Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges
No Picture Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00
No Picture Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90
Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar
Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $367.00
Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87
Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $440.00
Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $440.00
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System
Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50
Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80
No Picture Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00
No Picture Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00
No Picture Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48
No Picture Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54
No Picture Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00
No Picture Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61
Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00
No Picture Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20