FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 4166 Tractor Parts

[Categories] [All Farmall Models] [Print]

Accessories / Supplies

Engine Block Heater - Frost plug heater with cord. 1250 watt, 120 volt, 1.240 inch diameter. Fits tractors and combines with diesel engines. Cord is 72 inches long. Fits diesel engines: D312, D360, D and DT414, D and DT436, D and DT466. For 1066, 1086, 1440, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 164169, Ref: 71151C91) $90.00

Belts

Belt - Fan - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 6388, 6588, 6788, Replaces International OEM number 532746R2, Replaces manufacturer number 22650, REC (Raw Edge Cogged) Polyester Cord, Length: 65.5", Thickness: .43", Width: 5/8", (Item #: 123134) $23.10

Brakes

Brake Operating Lever, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM nos 384306R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447297) $40.01

Clutch

Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $6.90

Clutch Bearing and Seal Kit - Kit includes greasable release bearing N1174, pilot bearing 63042RS, inner 12363 and outer 19760 PTO seals, and o-ring 12250. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 3788, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 114543, Ref: N159763) $59.00

Clutch Bearing Seal Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, For Use With OEM Carrier, Contents: 1-832503 Release Bearing, 1-836304 Pilot Bearing, 1-535208 Inner IPTO Seal, 1-535209 Outer IPTO Seal, 1-22414 IPTO Bearing Cage O-Ring, (Item #: 108785) $61.00

$Farmall 4166 Clutch \ Brake Return Spring$
Clutch / Brake Return Spring - This spring has an overall length of 4.463 inch, with a wire diameter of 0.083 inch and an outside spring diameter of 0.744 inch. Fits: [1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 706, 756, 766, 806, 826, 856, 966 (use on the following gear drive tractor when used as a clutch pedal return spring)], [4100, 4156, 4166 (use on the following model when used as a clutch pedal and brake pedal return spring)]. Replaces: 626206R1. (Item #: 164483, Ref: 626206R1) $15.00

Clutch Disc - 14 inch diameter, 1-3/16 inch hub, 11 spline. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588. (Item #: 109963, Ref: 393117R93) $225.00

No
Picture
Clutch Disc - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, Replaces International OEM number 394239HD, 6 Pad, 1-3/16", 11 Spline, (Item #: 166267) $167.00

Clutch Disc, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Carbotic Pads, (Item #: 205981) $156.00

Clutch Disc, Remanufactured, 142197C4 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 142197C4, 142197C4R, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 8 Lg Pads, For a New version of this sku use Item #: 204417, (Item #: 204197) $284.50

Clutch Disc, Remanufactured, 393117R93 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, Replaces International OEM number 393117R93, 393117R93R, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 204192) $179.00

Clutch Disc, Remanufactured, 393117R93 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388, 3588, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 393117R93, 393117R93R, H393117, Clutch Size: 14", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 205982) $141.01

Clutch Kit - This single stage remanufactured heavy duty clutch kit contains a heavy duty remanufactured, 17 spline, 1 3/4 inch hub, 15 spring pressure plate assembly, a remanufactured, heavy duty, 6 pad, 11 spline, 1 3/16 inch hub clutch disc; new release bearing and new pilot bearing. For tractor models WITH Hydraulic Assist. For tractors: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456. (Item #: 202020, Ref: 67597K) $540.30

Clutch Kit, 14 Inch - This kit is used on tractors with Hydraulic Assist Clutches. This single stage new heavy duty clutch kit contains a heavy duty, 17 spline, 1 3/4 inch hub, 15 spring pressure plate assembly, a heavy duty, 6 pad, 11 spline, 1 3/16 inch hub clutch disc; new release bearing and new pilot bearing, clutch alignment tool. (Item #: 140639) $650.00

No
Picture
Clutch Kit, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (with Hydraulic Assist), Clutch Diameter - 14", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 6 Large Pads, Pressure Plate Size - 14", Pressure Plate Levers - 3, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 17, Pressure Plate Type - Single Stage, Flywheel Step 1.938", For Pressure Plate use Item #: 108078, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202011) $432.60

No
Picture
Clutch Kit, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (with Hydraulic Assist), Clutch Diameter - 14", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 8 Large Pads, Pressure Plate Size - 14", Pressure Plate Levers - 3, Pressure Plate Springs - 15, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 17, Pressure Plate Type - Single Stage, Flywheel Step 1.938", Additional Handling and Oversize Fees Apply To This Item, (Item #: 202021) $515.00

No
Picture
Clutch Kit, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (with Hydraulic Assist), Clutch Diameter - 14", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 8 Regular Pads, Pressure Plate Size - 14", Pressure Plate Levers - 3, Pressure Plate Springs - 15, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 17, Pressure Plate Type - Single Stage, Flywheel Step 1.938", Additional Handling and Oversize Fees Apply To This Item, (Item #: 205206) $412.00

No
Picture
Clutch Release Bearing - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Compatible with Massey Ferguson tractor models 285, 1080, 1085, 1135, 1155, 1500, 1505, 1800, 1805, Replaces Massey Ferguson OEM number 834602M1, Inside Diameter: 2.500", Outside Diameter: 4.128", Width: 0.864", (Item #: 176789) $43.70

Clutch Release Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 380110R1, For a new version of this item use Item #: 111850, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411850) $25.01

Clutch Release Shaft Kit - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 380109R1, 380110R1, 380180R12, (Item #: 113406) $240.00

Clutch Release Sleeve, Used - For International tractor models Hydro 100, 706, 756, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380109R1, For a new version of this item use Item #: 108765, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408765) $60.60

Clutch Rod Pin - For International / Farmall tractor models Hydro 100, 706, 756, 766 (s/n 7598-later), 806, 826, 856, 966 (s/n 14086-later), 1066 (s/n 17031-later), 1206, 1256, 1456, 1466 (s/n 12146-later), 1468 (s/n 7406-later), 1566, 1568, 4100, 4156, 4166, 4186, Replaces Case IH OEM number 382492R2, 382492R1, (Item #: 160845) $18.40

Pressure Plate Assembly, Remanufactured, 1251694C91 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 1251694C91, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204191) $228.50

Pressure Plate, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 30, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206055) $263.01

Pressure Plate, Remanufactured - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 21, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, (Item #: 206057) $246.01

Pressure Plate, Remanufactured, 120181C92 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (all less hydraulic clutch assist), Replaces International OEM number 120181C92, 120181C92R, H120181, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 15, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Flywheel Step 1.938", Additional Handling and Oversize Fees Apply To This Item, (Item #: 205146) $234.50

Pressure Plate, Remanufactured, 67597C92 - For International / Farmall tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4156, 4166, 4186, 21206, 21256, 21456 (all with hydraulic clutch assist), Replaces International OEM number 67597C92, 67597C92R, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 15, Pressure Plate Hub: 1-3/4" bolted, Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Flywheel Step 1.938", Additional Handling and Oversize Fees Apply To This Item, (Item #: 206056) $216.01

PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $62.00

Release Bearing - Greasable. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3688, 3788, 400, 4100, 4156, 4166, 4186, 4366, 4386, 450, 4568, 560, 6388, 6588, 660, 6788, 706, 756, 786, 806, 826, 856, 886, 966, 986, Hydro 100, W400, W450. It has an inside diameter of 2.50 inches, an outside diameter of 4.125 inches, and is .83 inches wide. Please verify measurements before ordering. (Item #: 107274, Ref: 365867R91) $24.80

Cooling System

Cooling Fan - 6 Blade, Used - For International tractor models Hydro 100, 886, 986, 1066, 1086, 1466, 1468, 1486, 3388, 4166, 4186, 6388, Replaces International OEM number 69759C3, 69759C2, 69759C1, 531229R1, Blades: 6, Outside Diameter: 22", Pilot Hole: 1", Mounting Holes: 1.75" on center, For a new version of this item use Item #: 140624, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431153) $134.01

Fan, 6 Blade - 22.00 inch diameter, 1.00 inch pilot hole, 1.750 inch center to center on bolt holes. For tractor models 786, 886, 986, 1066, 1086, 1466, 1486, 4166, 4186, 6388, Hydro 100. (Item #: 140624, Ref: 69759C3) $225.00

Oil Cooler Mount Gasket - For International / Farmall tractor models 666, 686, 766, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 675513C1, (Item #: 156020) $9.90

Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.60

Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $20.50

Water Pump - Water pump with hub installed. Heavy duty replacement with 8 vane impeller. Excellent where low cooling capacity is a problem. For diesel engines: D312, D360, D and DT414, D and DT436, D and DT466. For 1066, 1086, 1440, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 453, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. Replaces: 672644C95, 673162C93, 673162C94. (Item #: 100795, Ref: 673162C93) $110.00

Decals and Emblems

No
Picture
Decal Set, Hood - Black and chrome. For model International 4166 Turbo. Includes the "Turbo" decals for the hood also. (Item #: 183695, Ref: R1936) $258.00

Front Emblem - Plastic "IH" red, black and white, 3-7/8 inch x 3-1/2 inch. Center to center measurement on the mounting posts is 2-17/32 inch. For tractor models 544, 656, 664, 706, 2544, 2656, 2706, 4100, 4156, 4166, 4186, 4366, 4386. (Item #: 107904, Ref: 2751848R1) $19.80

Grille Emblem - For International / Farmall tractor models 544, 656, 706, 4100, 4156, 4166, 4186, 4366, 4386, Replaces International OEM number 2751845R1, Height:4", Chrome plated die cast, (Item #: 107905) $44.00

International Farmall Decal Set, Turbo White and Gold, Vinyl - For International / Farmall tractor models 2656, 2706, 2756, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, For IH/Farmall tractors with turbo systems, White and gold color, Set of 2 vinyl stickers, (Item #: 101005) $23.70

No
Picture
Turbo Decal - Set of 2 vinyl hood decals. These do not come in the hood sets for these models listed. For tractor models having a Turbo. For tractor models 1066, 1206, 1256, 1456, 1466, 1566, 4166, 4186, 4366, 766, 966. (Item #: 101004, Ref: R2636) $31.40

Drive Train

Ball Bearing - Constant Mesh and Torque Amplifier Drive Gear - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number ST3025, ST697, ST3024, ST3011, 80420C91, 80419C91, 15 Balls and Retainer, Inside Diameter: 75 mm, Outside Diameter: 130 mm, Width: 22 mm, This bearing is splash lubricated, Make sure sump has an adequate level of oil, (Item #: 168435) $29.90

Cover Assembly, Clutch Housing - For tractor models 1086, 1486, 1586, 3388, 3588, 3788, 4166, 4186, 786, 886, 986. Replaces 120018C91 and 399045R11. (Item #: 120017C91) $192.08

Gear, Reverse Idler - 30 tooth. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 2706, 2756, 2806, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 122675, Ref: 393523R1) $273.18

No
Picture
PTO Drive Gear Kit, 20 Degree - For International / Farmall tractor models 706, 756 (Farmall s/n 17635-earlier and International s/n 8424-earlier), 806, 856 (Farmall s/n 27286-earlier), 1206, 2756 (Farmall s/n 17635-earlier and International s/n 8424-earlier), 2856 (Farmall s/n 27286-earlier), 4100, 4156, 4166, 4186, Replaces International OEM number 380261R1, Kit Includes: IPTO Drive Gear, IPTO Bearing Cage, IPTO Ball Bearing, Inner IPTO Seal, Outer IPTO Seal, IPTO Bearing Cage O-Ring, Spline Count: 17, Tooth Count: 28, Outside Diameter: 1-3/4", (Item #: 176731) $365.00

Reverse Idler Gear, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 393523R1, Teeth: 30 and 21, For a new version of this item use Item #: 122675, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 422675) $100.01

Reverse Shift Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 380308R2, 380308R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430336) $50.01

Shift Cam, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21026, 21206, 21256, 21456, Replaces International OEM nos 380114R22, 380114R21, 430114R20, 430114R19, 430114R18, 430114R17, 430114R16, 430114R15, 430114R14, 430114R13, 430114R12, 430114R11, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430723) $75.01

Shift Detent Plate - Transmission speed cover, comes with rivets. For tractor models 1066, 1206, 1256, 1456, 1466, 1468, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 706, 756, 766, 806, 826, 856, 966. (Item #: 173010, Ref: 830443) $40.90

Shift Detent Plate - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, Compatible with International Construction and industrial models 21206, Replaces International OEM number 830438, With Rivets, Cam Is Not Included, (Item #: 110522) $32.87

Shift Fork Assembly, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM nos 380123R21, Speed Transmission, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498620) $68.01

Spacer, Countershaft Gears - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786 (1/74-12/80), 806, 826, 856, 886 (1/74-12/80), 886, 966, 986 (1/74-12/79), 1066, 1086 (1/74-12/79), 1206, 1256, 1456, 1466, 1468, 1486 (1/74-12/79), 2706, 2756, 2806, 2856, 3088 (1/81-12/86), 3288 (1/81-12/86), 3388 (1/79-12/81), 3588 (1/79-12/81), 3688 (1/81-12/86), 4100, 4156, 4166, 4186 (1/76-12/79), 6388 (1/81-12/83), 6588 (1/81-12/83), Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 380126R2, 380126R1, (Item #: 170256) $19.98

Transmission Brake Pad and Screw - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3388, 3588, 3788, 4100, 4156, 4166, 21206, 21256, (Item #: 168453) $28.40

Transmission Countershaft Nut - For International / Farmall tractor models 706 (756), 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148952C1, 148952C2, LH Thread, (Item #: 113418) $20.10

No
Picture
Transmission Countershaft Nut - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4156, 4166, 4186, 6388, 6588, 6788, Replaces International OEM number 380092R1, Original style with Right Hand threads, (Item #: 176734) $30.30

Electrical System

Alternator - 12 volt, 63 amp. 3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For tractor models (715D 1972-74 with 301 dsl), (95 1974-79 with 310 dsl), (666D 1972-76 with 312 dsl), (Hydro 70D 1973-76 with 312 dsl), (Hydro 100D 1973-76 with 436 dsl), (140, 140HC 1973-74 with 123 gas), (464D 1973-76 with 360 dsl), (574D 1973-76 with 239 dsl), (766D 1971-76 with 360 dsl), (966 1971-76 with 414 dsl), (1066D 1971-76 with 414 dsl), (1466D 1971-76 with 436 dsl), (1468D 1971-74 with 550 dsl), (1566D 1974-76 with 436 dsl), (1568D 1974-76 with 550 dsl), (2500A-D, 2500B-D 1972-74 with 239 dsl), (4166D 1972-76 with 436 dsl), (4366D 1973-76 with 466 dsl). Replaces 1100581, 1100578. (Item #: 111768, Ref: ADR0239) $110.00

Alternator Pulley - This Double Groove Alternator Pulley is 2.350 inches tall, has a 4.400 inch outside diameter and a 0.670 inch (17mm) inside diameter. It is used on 1066, 1086, 1440 Combine, 1460 Combine, 1466, 1468, 1470 Combine, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 6388, 6588, 6788, 766, 786, 815 Combine, 966, 986, Hydro 100, Hydro 186. It replaces original part number 537070R1, 24-1106, 110891 (Item #: 110891, Ref: 537070R1) $28.60

Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Tractors: 656, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2656, 2706, 2756, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, Hydro 100, Hydro 186. Combine: 715, 815, 915, 1420, 1440, 1460, 1470, 1480. Windrower: 4000, 5000, 5500, 8830. Replaces 539053R3, 539053R2, 539053R1, 1987442C1, 1987399C3, 175577C2, 175577C1. (Item #: 108656, Ref: 72162089) $74.00

Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $11.10

Key Switch, 2 Terminal - With keys. For tractor models 3444, 3514, 3616, 4100, 4156, 4166, 4186, 4366, 4386, 615, 715, 815, 915. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.30

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $29.30

Pulley - This Pulley measures: 1.480 Inches Wide, 4.220 Inch Outside Diameter, 0.670 Inch Shaft Diameter. It is used with 16mm (5/8 inch) Belts. Replaces 384645R1, 24-1105, ADR5022 (Item #: 121930, Ref: 384645R1) $31.80

Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $30.00

Starter Drive - Starter drive, services Delco starters: 1108640, 1113176, 1113439, 1113649, 1108646, 1113197, 1113440, 1113684, 1113034, 1113398, 1113489, 1113685, 1113053. 10 teeth For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 186, 21206, 21256, 21456, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 400, 4166, 4186, 450, 6388, 650, 6588, 660, 6788, 706, 756, 766, 786, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186 (Item #: 110778, Ref: 1877350) $32.30

Starter Drive - Replaces; 1877350, 1948877, 1933838, 800965. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21456, 21256, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 350, 3588, 3688, 3788, 4166, 4186, 450, 560, 6388, 6588, 660, 6788, 706, 756, 766, 786, 806, 815, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 3488. With spiral shaft. (Item #: 117546, Ref: 1651487C1) $33.90

Starter Drive - Delco Style - Ratchet Type - For International / Farmall tractor models Hydro 100, Hydro 186, W450, 350, 350U, 400, 450, 460, 560, 660, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4166, 4186, 6388, 6588, 6788, Compatible with International Combine (s) 815, 915, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 500, Replaces International manufacturer number 1107341, 1108640, 1108646, 1107544, 1108659, 1113034, 1113053, 1113176, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, Replaces Delco Remy Starter Drive number 1877350, Replaces Delco Remy Starter number 1108640, 1108646, 1108336, 1109433, 1107390, 1109425, 10455339, 10455354, 10465416, 10465430, 1107341, 1998392, 1998290, 1998300, 10455323, 1107532, 1998332, 1998375, 1107873, 1109260, 1109271, 1107544, 1108659, 1107779, 1113034, 1113053, 1113176, 1113149, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, 1108475, 1113071, 1113117, 1113118, 10455320, Delco Style, Teeth: 10, Outer Diameter: 39.5mm, Inner Diameter: 14.3mm, Rotation: Counter Clockwise, Overall Length: 96.5mm, Clutch Type: Ratchet, Splines: 3, (Item #: 111104) $33.90

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.20

Starting Button - Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Item #: 112232, Ref: A36948) $7.20

Starting Button - Attaches with spade terminals. For tractor models 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.20

Start Solenoid - Solenoid assembly, services Delco starters 1113398, 1114439. Tractors: Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1486, 1586, 3088, 3288, 3688, 4166, 4186. For 1066, 1086, 1466, 1486, 1586, 3088, 3288, 3688, 4166, 4186, 766, 786, 886, 966, 986, HYDRO 186. Replaces 121904C1 (Item #: 105672, Ref: 1115510) $30.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.50

Voltage Regulator, Internal - Alternator regulator, internal, heavy duty, replaces Delco numbers 1116392 and 1116387. Services Delco alternators: 1100578, 1102375, 1100583, 1100585, 1100587, 1100593, 1102920, 1102921, 1103160, 1103171, 1103183, 1103184, 1103971, 1105164, 1105538, 1107178, 1116. For tractors: 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 172582, Ref: 585624C1) $5.60

Engine Bearings

Cam Bearing Set - Camshaft bearing kit for six cylinder diesel engine. For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. (Item #: CBK-H414) $42.50

Camshaft Bearing Set - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number 680117C3, 680117C1, Sold as complete set, (Item #: 106672) $23.90

Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681315C3, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106499) $12.00

Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 687382C3, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106500) $12.50

Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681316C3, 1823858C91, Sold per journal, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106545) $12.80

Connecting Rod Bearing - .040" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Sold per journal, Bearing Size: .040" Oversize, For Standard connecting rod bearing use Item #: 106545, (Item #: 106546) $21.30

Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681314C3, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106546, (Item #: 106498) $12.20

Inner IPTO Gear Seal - For International / Farmall tractor models 4156, 4166, 4186, Replaces International OEM number 535208R92, (Item #: 158865) $11.30

Main Bearings - .010 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Replaces International OEM number 1823848C91, Sold in complete sets, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106628, (Item #: 106629) $143.00

Main Bearings - .020 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106628, (Item #: 106630) $110.00

Main Bearings - .030 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Bearing Size: .030" Oversize, Sold in complete set, For Standard main bearing use Item #: 106628, (Item #: 106631) $83.58

No
Picture
Main Bearing Set - For 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cylinder engine. Cupped head piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). (Item #: 106628, Ref: MBK414) $98.00

Outer IPTO Gear Seal - For International / Farmall tractor models 4100, 4156, 4166, 4186, Replaces International OEM number 535209R92, For Inner IPTO Gear Seal use Item #: 158865, (Item #: 158871) $9.40

PTO Clutch Pack, Heavy Duty - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 756, 766, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 2756, 2856, 3388, 4166, 4186, Replaces International OEM number 68802C91, 381490R4, 381489R3, Includes (10) One Sided Friction Drive Plates, (2) Steel Sealing Rings, (Item #: 169792) $175.00

Range Cover Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380315R2, 380315R1, Length: 14-3/8", Width: 8", (Item #: 166208) $8.00

Release Bearing Carrier - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380109R1, 69789C1, I.D.: 2.500", O.D.: 4.154", Thickness: .865", (Item #: 112251) $119.00

Rod Bearing Set - ROD Bearing SET For 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966 (Item #: CRK-H361D) $105.09

No
Picture
Rod Bearing Set, .010 - Rod bearing set. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: CRK-H361D-010) $69.23

No
Picture
Rod Bearing Set, .020 - Rod bearing set. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: CRK-H361D-020) $95.18

No
Picture
Transmission Gear Shift Cover Gasket - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, Replaces International OEM number 380112R2, (Item #: 173861) $8.90

Engine Gaskets

Front Crank Seal - This front crankshaft oil seal has a 3 inch Inside Diameter, a 4 inch Outside Diameter and is .5 inch wide. It Fits: 1440, 1460, 1470, 1480, 1640, 1660, 1680, 453, 815, 915, 1822 (diesels up to SN: JJC0012690), 1844 (diesels up to SN: JJ0002462), 515, H60E, H65C, S10, S8A, S9B, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 966, 986, 886, E200, E412, E412B. Replaces: 690437C91 (Item #: 106647, Ref: 690437C91) $12.98

No
Picture
Gasket Set - Complete Gasket Set including crankshaft seals for 414/436/466 CID Diesel engines in: 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and for 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cylinder engine. Cupped head piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines (DT436 CID), 4366, (4386 to engine serial number 74999). (Item #: GK414) $310.60

No
Picture
Lower Gasket Set - For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. (Item #: 106730, Ref: CS414) $106.00

Oil Pan Gasket - For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Due to the size of this gasket, (Item #: 106710, Ref: 671827C1) $26.70

Rear Crank Seal - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: 106660, Ref: 691631C91) $29.98

No
Picture
Rear Crankshaft Seal - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 4166, 4186, 5088, 6388, 766, 806, 815, 856, 915, 966 (Item #: 106660, Ref: 1809964C92) $29.98

No
Picture
Rear Crankshaft Seal and Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 2856, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 2349-earlier), 1440, 1460, 1480 (s/n 24000-earlier), Compatible with International Construction and industrial models TD15B, 175, Neoprene style, (Item #: 176971) $140.00

No
Picture
Upper Gasket Set - Valve Grind Gasket Set for 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Contains all gaskets necessary for doing a valve job, (including head gasket). (Item #: 106695, Ref: HS414) $110.00

Valve Cover Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466 (Diesel), Replaces International OEM number 1342828C1, Rubber, (Item #: 128631) $8.70

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings - For 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. YTO BEKHDT436-LCB (Item #: 130623) $957.00

No
Picture
Basic In-Frame Engine Kit - For 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189603, Ref: BIFHDT436) $1059.01

No
Picture
Cylinder Kit - For International / Farmall tractor models 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388, Compatible with International Engine (s) DT436, Replaces International OEM number 684261C95, Contains narrow gap rings, Will work on both side mounted and valve cover breathers, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128685) $145.00

Cylinder Sleeve - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number A77692, Bore: 4.3", Flange Outside Diameter: 5.245", Overall Length: 9.435", Flange Thickness: .35", (Item #: 128746) $61.00

No
Picture
Engine Overhaul Kit, Less Bearings - For 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOKDT436-LCB) $1437.28

No
Picture
Piston Liner Kit - For International / Farmall tractor models 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388, Compatible with International Combine (s) 1460, 1480, Replaces International OEM number PA441X, Center of wrist pin to top of piston is 3.576", (Item #: 174575) $309.00

Rear Main Seal Sleeve and Seal Installer - Used to install both the seal and sleeve at the same time, this tool is used with 106660 Seal and Sleeve set. (Item #: 122044) $263.00

No
Picture
Valve Overhaul Kit - For tractor models 966, combine 815, 1066, 1086, combine 915, 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388, combine 1460, 1480, 4366, 4386, 3588, 3788, 4386, 5288, 5488, 6588, 6788, 7288, 7488, combine1470, 1480 (6 cylinder Diesel Turbo and Non-Turbo, D414, DT414, DT414B, DT436, DT436B, DT466, DT1466, DT466B, DT1466B, DT466C, DT1466C). Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH414) $362.33

Engine Parts

Cam Plate - For International / Farmall tractor models 706, 806, 1206, 4100, 4156, 4166 (all with HI-LO Transmission), Replaces International OEM number 380306K, Range cover shift cam detent with rivits., Used on 380306R51 (113404), (Item #: 151115) $27.00

No
Picture
Cam Retaining Coupler - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 21206, 21256, 21456, Replaces International OEM number 380117, Includes: 2 Grooved Pins, (Item #: 176730) $73.00

Camshaft - This New Camshaft is used on 6 Cylinder 400 Series Diesel engines. Replaces original part number 1802337C91 (Item #: 113417, Ref: 1802337C91) $293.00

Camshaft with Drive Gear and Thrust Plate - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Replaces International OEM number 1802337C1, 1802337C2, 1802505C1, Kit Includes Drive Gear and Thrust Plate, Order Lifters Separately, For Camshft only use Item #: 113417, (Item #: 122005) $570.00

Camshaft With Large Lifters and Gear - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Kit Includes Drive Gear, Thrust Plate and 12 New 1-1/8" Lifters, (Item #: 122003) $650.00

Camshaft with Small Lifters and Gear - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Kit Includes Drive Gear, Thrust Plate and 12 New 1" Lifters, (Item #: 122002) $636.00

Connecting Rod Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D414, DT414, D436, DT436, DT466, Replaces International OEM number 676679C2, (Item #: 128743) $5.90

Crankshaft Damper Pulley - This is a 3 spoke pulley/dampener. For tractor models 1066, 1086, 1440, 1460, 1480, 3488, 3588, 3688, 4166, 4186, 5088, 6588, 666, 686, 766, 815, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. All with DT-414, DT436, D-312 or D-360 engines. It measures: 10.203 inch outside diameter, 2.125 inch center hole and 2.61 inches wide. Replaces 680275C92. (Item #: 112099, Ref: 680275C92) $283.00

No
Picture
Crankshaft, Remanufactured, 675051C - For International / Farmall tractor models 986, 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388, Compatible with International Combine (s) 1440, 1460, 1480, Compatible with International Engine (s) D436, DT436, Replaces Casting number 675051C, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200259) $830.01

No
Picture
Cylinder Head, Remanufactured, 675549C - For International / Farmall tractor models 1066, 1086 (Early), 1466, 1486 (Early), 1566, 1586 (Early), 4166, 4186 (Early), 4366, 4386 (Early), Compatible with International Combine (s) 915, 1440, 1460, 1480, Replaces International Casting number 675549C, 680426C, 680429V, 688833C, 75549C, Engines 414, 436, 466, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200216) $1300.01

No
Picture
Deep Well Lifter - For International / Farmall tractor models Hydro 100, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3488, 3588, 3788, 4166, 4186, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, Compatible with International Combine (s) 1440, 1460, 1470, 1480, Replaces International OEM number 684729C1, (Item #: 165595) $8.30

Driving Gear, Used - For International tractor models Hydro 100, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4156, 4166, 4186, 6388, 6588, 21456, Replaces International OEM number 406473R1, Splines: 25, Teeth: 27, 1st Speed Driving, For a new version of this item use Item #: 108863, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408863) $75.01

No
Picture
Flywheel - With Ring Gear. For 1066, 1086, 1466, 1486, 1566, 1586, 3688, 4166, 4186, 6388 with 414, 436 or 466 Engines and 14 inch clutch. (Item #: 103901, Ref: R2322) $470.00

Flywheel With Ring Gear - This Flywheel with Ring Gear is used with 14 inc clutches on 1066, 1086, 1466, 1486, 1566, 1586, 3688, 4166, 4186. (Item #: 103901, Ref: 672215C91) $470.00

Flywheel With Ring Gear - For International / Farmall tractor models 1066 (Gear Drive), 1086, 1466, 1486, 1566, 1586, 4166, 4186, 6388, Replaces Case IH OEM number 672215SP, Engines: DT466, 436, B414 (Diesel), Used with 14" clutch, Made from durabar steel for special applications, Additional Handling and Oversize Fees Apply To This Item, (Item #: 159149) $1479.01

Flywheel with Ring Gear, Used - For International tractor models 1066 (gear drive), 1086 (gear drive), 1466, 1486, 1566, 1586, 3688, 4166, 4186, Compatible with International Engine(s) D414, DT414, D436, DT436, Replaces International OEM number 672215C91, Used with 14" clutch, Teeth: 132, For a new version of this item use Item #: 103901, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403901) $262.01

Forward Reverse Shift Collar, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 393524R1, 380302R1, 3.61" Dia., Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498210) $40.01

Hi Lo Shift Collar, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 393521R1, Diameter: 5.05", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498208) $95.01

Push Rod - Used in IH diesel engines: D414, DT414, DT466B, DT466C, DTI466C, D436, DT436, D466, DT466, Early DT466B, Early DT466C, this part replaces OEM numbers 675621C1, 675621C2. These engines are found in Hydro 100 ``Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 5088, 5288, 5488, 6388, 6588, 6788. This push rod is 11-1/4 inches long. (Item #: 108771) $14.40

Push Rod, Used - For International tractor models 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3688, 4166, 4186, 5088, 6388, Replaces International OEM number 675621C1, 11.5675" Long, For a new version of this item use Item #: 108771, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408771) $5.01

Range Transmission Shift Cam - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, 21206, Replaces International OEM number 380306R51, (Item #: 113404) $207.00

Ring Gear, Flywheel - This Flywheel Ring Gear has 132 Teeth, 16.685 inch outside diameter, 15.490 inch inside diameter, 0.875 inch width. It is used on 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 21206, 21256, 21456, 3388, 3588, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788. D361 Eng, D407 Eng, D414 Eng, D436 Eng, DT361 Eng, DT407 Eng, DT414 Eng, DT429 Eng, DT436 Eng. Replaces 326759R1 (Item #: 103902, Ref: 326759R1) $106.00

No
Picture
Ring Set 1 Cylinder - RING SET 1 Cylinder. For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 915, all with 414 CID, 6 cylinder turbocharged diesel, standard bore 4.3 inches. Contains 2 x 1/8, 1 x 1/4, per cylinder. Can also be used to replace 687429C91. (Item #: 684256C91) $56.99

Shift Rail, Used - For International tractor models 706, 756, 766, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 380122R1, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430720) $27.01

No
Picture
Tach Drive Gear, Used - For International tractor models 666, 686, 766, 966, 1066, 1466, 1486, 1566, 3388, 3588, 3788, 4166, 4366, Compatible with International Engine(s) D312, D360, D414, DT414, D436, D466, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C, Replaces International OEM nos 676938C1, Teeth: 32, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443199) $116.01

Timing Gear, Camshaft - 66 teeth. For tractor models 666, 686, 766, 826, 886, 926, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 185488, Ref: 675600C1) $72.00

No
Picture
Timing Gear, Crankshaft - 33 teeth. For tractor models 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 155745, Ref: 675406C1) $184.00

Transmission Countershaft, Used - For International tractor models Hydro 100, 766 (s/n 17510-later), 966 (s/n 32983-later), 1066 (s/n 59216-later), 1466 (s/n 30959-later), 1566, 1568, 4166, 4186, Replaces International OEM nos 71784C1, 380082R3, Right Hand Threads, Length: 18.5", Splines: 25, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434820) $137.01

Transmission Countershaft, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148951C1, 148951C, Tubular, LH Thread, Early SN 66 and prior models requires spacer 71147C1, 71147C2, For a new version of this item use Item #: 113419, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497400) $179.01

Transmission Drive Shaft, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 380076R4, 380076R1, 380076R2, 380076R3, Teeth: 26, Splines: 11, For a new version of this item use Item #: 162945, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499217) $234.01

Transmission Gear - 1st - For International / Farmall tractor models Hydro 100, 756 (Farmall s/n 173636-later, International s/n 8425-later), 766, 786, 826, 856 (Farmall s/n 27287-later, International s/n 9493-later), 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2756 (Farmall s/n 173636-later, International s/n 8425-later), 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4156, 4166, 4186, 6388, 6588, 21456, Replaces International OEM number 406473R1, Outside Teeth: 27, Inside Teeth: 25, (Item #: 108863) $149.00

Valve, Exhaust - Exhaust Valve. For 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cylinder engine. Cupped Head Piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). (Item #: 156090, Ref: 676865C2) $19.60

Valve, Intake - Intake Valve. For 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cyline engine. Cupped head piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). (Item #: 156088, Ref: 675046C2) $17.80

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Contains: springs, guides, locks, (no valves). (Item #: VSKH414) $127.04

No
Picture
Valve Spring - VALVE SPRING. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. (Item #: 156092, Ref: 682064C1) $5.20

Valve Tappet 0.999 Inch - These tappets are used in the following engines: C221, C263, C291, C301, (DT436 Engine serial number <121624), (DT436B Engine serial number <121624), (DT466 Engine serial number <140087), (DT466B Engine serial number <140087), D188, D236, D282, D360, D361, (D414 Engine serial number <155806), (D436 Engine serial number <121624), (D466 Engine serial number <140087). They are 0.999 inch diameter. Replaces original part numbers 72524R3, 684729C1, 911776R3, 91176R2, 911776R1, 76952R2, 677541C1, 606492, 28708A, 75524R3, 75524R2, 75524R1. (Item #: 108437, Ref: 911776R3) $7.80

Valve Tappet 1.12 Inch - These tappets are used in the following engines: DTI466C, (DT436 Engine serial number 121624>), (DT436B Engine serial number 121624>), (DT466 Engine serial number 140087>), (DT466B Engine serial number 140087>), DT466C, (D414 Engine serial number 155806>), (D436 Engine serial number 121624>), (D466 Engine serial number 140087>). They have a 1.12 inch diameter. Replaces original part number 1802340C1. (Item #: 156082, Ref: 1802340C1) $8.80

Valve Train Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, DT466B, DT466C, DTI466C, Includes: Intake Valves, Exhaust Valves, Valve Guides, Valve Springs, Valve Keepers, (Item #: 120325) $272.00

Engine Pistons and Sleeves

Piston Pin Bushing - For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Price shown is for each. (Item #: 128614, Ref: 675006C1) $8.50

No
Picture
Sleeve - For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. (Item #: 682720C1) $96.20

No
Picture
Sleeve and Piston Kit - For 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 4.3 inch standard bore. (Item #: PK-DT436) $1005.67

Engine Rings

Piston Ring Set - Standard - 6 Cylinder - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1466, 1566, 3688, 4166, 4366 (all diesel), Compatible with International Engine (s) D414, DT414, D436, DT436, Bore: 4.300", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .094", 2nd Groove Style: Chrome Half Keystone, 10 Degree, 3rd Groove Size: .250", 3rd Groove Style: Chromed Cast Iron oil / Coiled Spring, Sold as a complete 6 cylinder set, (Item #: 128913) $963.00

Exhaust System

Chrome Stack, Curved - This new Curved Chrome Stack is double walled. It has a 3-3/4 inch inlet inside diameter, a 5 inch outside diameter. It is 36 inch tall with an additional 8 inch base. For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 4166, 4366, 4386. (Item #: 178933, Ref: R4884) $439.00

Exhaust Elbow - For tractor models: 1066, 1466, 1566, 4166, 4186, 4366, 4386. Replaces IHS146. (Item #: 101562, Ref: 675316C2) $77.01

Exhaust Elbow Rings - Exhaust Elbow Sleeve Donut. Tractors: 1066, 1466, 1566, some 88 Series. 2 required per sleeve. Sold individually. Use with exhaust elbow part number 675316C2. (Item #: 101565, Ref: 702299C2) $10.40

Exhaust Elbow Sleeve - Tractors: 1066, 1466, 1566, Some 88 Series. Use with exhaust elbow 675316C2. Replaces IHS159. (Item #: 101564, Ref: 675317C2) $44.90

Exhaust Manifold, Front - For tractor models 1066, 1086, 1466, 1486, 1566, 1586, 3388, 4166, 4186, 6388. Replaces 683562C1. (Item #: 121728, Ref: 683564C91) $238.00

Exhaust Manifold, Rear - For tractor models 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 100, Hydro 186. (Item #: 121729, Ref: 675779C3) $143.00

Exhaust Manifold - Rear, Used - For International tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine(s) 815, 915, 1460, 1470, 1480, Replaces International OEM number 675779C1, 675779C2, 675779C3, Rear Section, For a new version of this item use Item #: 121729, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421729) $87.01

Front Exhaust Manifold, Used - For International tractor models 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 6388, 6588, 6788, Compatible with International Combine(s) 915, 1460, 1470, 1480, Replaces International OEM number 683562C1, 683564C91, Replaces OEM nos 672275C3, 672275C2, For a new version of this item use Item #: 121728, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421728) $137.01

Manifold Gasket Set - Used with 683564C91 front and 675779C3 rear manifolds. (Item #: 121768, Ref: R4919G) $21.00

Turbocharger with Gaskets - This Turbo Charger comes with gaskets. It is used on tractors using TO4B18 and TO4B25 Air Research style turbos. Fits Engines: 451B, 451BDT DT414, DT429, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C. Replaces OEM numbers A184785, 749267C92, 684240C92, 702300C91, 409570-9016, 409570-5016, TO4B18, TO4B25, A43361, A157335, A43360, A44052, A48190, A66770 (Item #: 101148, Ref: 749267C92) $360.00

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple International/Farmall models. Replaces: 383734R2, 625043C1. (Item #: 121925, Ref: T23262) $6.30

Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Item #: 107987, Ref: 23995DC-CHROME) $2.60

Fuel Injector, Remanufactured, 631571C91, 675967C91 - For International / Farmall tractor models 966, 1066, 1466, 1486, 1566, 1568, 1586, 3688, 4166, 4186, Compatible with International Combine (s) 1440, 1460, 1480, Replaces International OEM number 631571C91, 675967C91, For a New version of this sku use Item #: 160139, (Item #: 210613) $106.01

No
Picture
Injector - Fuel injector assembly, remanufactured. For 1066, 1086, 1440, 1460, 1466, 1480, 1486, 1566, 1586, 3488, 3688, 4166, 4186, 4366, 4386, 453, 666, 686, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 160139, Ref: 631571C91-EX) $62.00

No
Picture
Injector - Does not include boot (not available). Replaces 631571C91, 675967C1. For tractor models 1440 after engine serial number 66058, 1460 before engine serial number 100008, 1480 before engine serial number 103042, 815, UD414, 1066, 1086 before engine serial number 140024, 1466, 1486 before engine serial number 100078, 1566, 1586 before engine serial number 100394, 3688, 4166, 4186, 966. (Item #: 160139, Ref: 675967C91) $62.00

Throttle Handle - This Throttle Handle comes with Nickel Plated Plug. Red with black handle and nickel plug (1 inch plug diameter) 11.25 inches long, 1-3/8 inches wide, 1-7/8 inches thick, 1/2 inch diameter shaft, 1/8 inch pin slot. Fits: 1206, 21206, 2706, 2806, 4100, 4156, 4166, 4186, 656, 706, 806; Replaces: plug: 192105, 382682R1, handle: 391666R1. (Item #: 179411, Ref: 391666R1) $140.00

Gaskets

Seal and Bushing Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, All TA Tractors, (Item #: 168459) $22.70

Gauges

Tachometer Cable - Used on International models" Hydro 70, Hydro 86, Hydro 100, 666 (Gear Drive), 766, 786, 806, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 2806, 2856, 3088, 3288, 3688, 4166, 4186, 4366, 21026, 21256, 21456. This cable measures 80 inches. 5/8 - 18 thres on one side, 7/8 - 18 thread on the opposite. Squared ends. Replaces International OEM nos 393328R93, 384845R92, 387916R91, 393328R92, 393328R91 (Item #: 107953) $28.40

Tachometer Cable - For International / Farmall tractor models 600, 650, 666 (Diesel with D310 Engine), 766 (Diesel with gear Drive), 806 (Diesel with gear Drive), 856 (Diesel with gear Drive), 1026 (Diesel), 1206 (Diesel with gear Drive), 1256 (Diesel), 1256, 1456 (Diesel with gear Drive), 2856 (Diesel with gear Drive), 3088 (Diesel), 3288 (Diesel), 4166 (Diesel), 4186 (Diesel), 4366 (Diesel), 21026, 21256, 21456 (Diesel with gear Drive), Replaces International OEM number 384845R92, 387916R91, 393328R91, 393328R92, 393328R93, 341210C91, 89159R91, Length: 80", Load End:, Drive End:, Metal Sheath, 5/8 - 18 x 7/8 - 18 threads with square on both ends, For Nylon Sheath Cover use Item #: 115094, (Item #: 115095) $34.70

Tachometer Drive Assembly, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1568, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 6388, 6588, 6788, Compatible with International Engine(s) D312, D360, D414, DT414, D436, D466, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C, Replaces International OEM nos 671806C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498057) $70.01

Hitch / Drawbar

Pin, Front Drawbar - 1" pin diameter, 2.50" usable length, 3.120" overall length, 1.50" head dia. For tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, (4100, 4156, 4166, 4186 thid id drawbar support arm pin for these models), 2544, 2656. (Item #: 170296, Ref: 439-51644) $4.98

Top Link Pin - Replacing OEM part numbers 1286040C5, 1286826C2, 1286840C7, 392208R12, P6840, this top link pin has a diameter of 1.25 inches. It is used on the following models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206 Indust/Const, 21256 Indust/Const, 21456 Indust/Const, 3388, 3588, 3788, 4100 Indust/Const, 4166, 4186, 5088, 5288, 5488, 6388, 6588, 6788, 7110, 7130, 7210, 7230 (Item #: 108553, Ref: 1286840C7) $26.98

Hydraulic System

No
Picture
Hydraulic Pump Kit - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4166, 21026, 21206, 21256, 21456, Replaces International OEM number 1949304C1, 382330R91, 382330R92, 391353R92, 527397R91, 527397R92, 527397R93, 64801C91, 393877, 384443R92, 9 GPM, Max Pressure: 2100, Kit Includes: MCV hydraulic pump, MCV gasket kit, and KCV relief valve, (Item #: 176736) $690.00

Pump - Hydraulic pump, on clutch housing for power supply and multiple control value. 9 GPM. IHC.Tractors: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4166, 4186; Industrial: 21026, 21206, 21256, 21456. Replaces 133440C92, 527397R93. (Item #: 104337, Ref: 527397R93) $273.00

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $14.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.10

Light Switch, 12 Volt, 4 Position - For tractor models 1026, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1066, 1456, 1466, 1468, 1566, 1568, 4166, 4186, 4366, 4386, Hydro 70, Hydro 86, Hydro 100. (Item #: 111900, Ref: 403571R1) $40.00

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.00

Miscellaneous

Cab Foam Floor Mat, Black - For International / Farmall tractor models 4166, 4186, Color: Black, Kits are computer cut to assure accuracy, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112704) $183.00

No
Picture
Cab Foam Kit less Headliner - For International / Farmall tractor models 4166, 4186, Color: Black, Kits are computer cut to assure accuracy, Includes 1 can of Spray Adhesive, For additional Spray Adhesive use Item #: 112704, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112703) $383.00

Hydraulic Pump Drive Gear, Used - For International tractor models Hydro 100, Hydro 186, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2756, 2826, 2856, 3088, 3288, 3688, 4156, 4166, 4186, 21456, Replaces International OEM number 405181R1, Teeth: 19, Degree: 25, For a new version of this item use Item #: 111683, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411683) $29.91

Hydraulic Valve, Used - For International tractor models Hydro 100, 766, 856, 966, 1066, 1456, 1466, 1468, 2856, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 21456, Replaces International OEM number 529911R93, 529911R91, 529911R92, Closed On One Side, 2000 psi to 2500 psi, For a Remanufactured version of this part use Item #: 207000, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 407000) $485.01

Hydraulic Valve, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1026, 1066, 1456, 2544, 2656, 2756, 2826, 2856, 4156, 4166, 4186, 4366, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 383267R94, 529910R93, 383267R91, 383267R92, 383267R93, 529910R91, 529912R91, 529912R92, 529910R92, Opened on both sides, Open Center Hydraulic Sysyem, For a Remanufactured version of this part use Item #: 206999, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498240) $555.01

MCV Relief Valve - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2856, 3088, 3288, 3488, 3688, 4100, 4156, 4166, 4186, 5088, 5288, 5488, 21206, 21256, 21456, Replaces International OEM number 384443R92, 384443R91, (Item #: 154335) $138.00

O-Ring, Hydraulic - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2756, 2806, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21256, Replaces International OEM number 346959R1, 511524, (Item #: 153568) $0.50

Park Pawl, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 139141C1, 384094R2, For a new version of this item use Item #: 113420, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413420) $119.01

Pilot Relief Valve - For International / Farmall tractor models Hydro 100, 454, 574, 656, 766, 806, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 2400A, 2500A, 2656, 2806, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Replaces International OEM number 388208R93, 388208R91, 388208R92, 2000 psi, (Item #: 154338) $178.00

Pilot Relief Valve, Used - For International tractor models Hydro 100, 454, 574, 656, 766, 856, 966, 1026, 1066, 1456, 1466, 1468, 2400, 2500, 2656, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 388208R93, 2000 PSI, For a new version of this item use Item #: 154338, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498628) $113.71

No
Picture
PTO Valve Stem Actuating Link - For International / Farmall tractor models Hydro 100, 756, 766 (1/72-12/78), 856, 966 (1/71-12/71), 1066 (Diesel, 1/74-12/78), 1466 (Diesel, 1/72-12/77), 1468 (Diesel, 1/74-12/76), 2756, 2856, 4166 (4WD, Diesel, 1/72-12/72), 4186 (4WD, Diesel, 1/76-12/79), Replaces International OEM number 384192R21, (Item #: 173869) $42.60

No
Picture
Speed Transmission Control Arm Kit, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 382565R21, 380115R2, 383997R1, Includes control arm, roller and spring, For a new version of this item use Item #: 113499, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435622) $27.01

Oil System

Oil Filter - Oil filter element, spin on type. Approximate diameter 7.17 inch height, 3.69 inch outside diameter. For diesel engines: D282. D312, D and DT414, D and DT 436, D and DT466. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 2656, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 5088, 5288, 5488, 6388, 656, 6588, 666, 6788, 686, 7288, 7488, 815, 85, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 111132, Ref: A184775) $15.30

PTO / Driveline

Anti Creep Brake Piston - This Anti Creep Piston is used in multiple International models. Three are used per tractor. Sold individually. (Item #: 113402, Ref: 381464R22) $15.70

Independant PTO Bearing Cage, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 380101R2, For a new version of this item use Item #: 123110, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 423110) $30.01

Internal PTO Shaft - 1 3/4 inch diameter, 17 spline, 28 teeth, 20 degree tooth angle. Check degree of angle on gear teeth BEFORE ordering. For tractor models 1206, (2756 farmall serial number up to 17635 and IH serial number up to 8424), (2856 farmall serial number up to 27286 and IH up to serial number 9492), 4100, 4156, 4166, 4186, 706, Farmall 756 (to serial number 17635), International 756 (to serial number 8424), 806, Farmall 856 (to serial number 27826) (International 856 up to serial number 9492), 1400. (Item #: 108817, Ref: 380261R1) $80.00

No
Picture
PTO Driven Shaft Bearing Retainer, Used - For International tractor models Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4166 (s/n 11100-later), 4186 (s/n 11100-later), 6388, 6588, 6788, Replaces International OEM nos 67757C1, Use with Gear 68511C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434845) $20.01

PTO Drive Shaft Bearing Cage - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 966, 986, Hydro 100. (Item #: 172679, Ref: 384079R2) $211.00

PTO Drive Shaft Bearing Retainer, Used - For International tractor models Hydro 100, 706, 756, 766 (s/n 11780-earlier), 806, 826, 856, 966 (s/n 17001-20613), 1066 (s/n 30176-earlier), 1206, 1256, 1456, 1466 (s/n 18131-earlier), 1468 (s/n 9546-earlier), 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166 (s/n 11099-earlier), 4186 (s/n 11099-earlier), 21206, 21256, 21456, Replaces International OEM nos 380107R1, Use with Independent Gears: 528677R1, 67594C1 and 68512C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435045) $36.01

PTO Front Bearing Retainer Seal - This seal is used on International Tractors: 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 6388, 6588, 6788 (Item #: 166328, Ref: 67761C1) $4.40

No
Picture
PTO Shaft - 1 3/4 inch diameter, 17 spline, 28 teeth, 25 degree tooth angle. For 4156, 4166, 4186. (Item #: 178264, Ref: R2985) $163.00

PTO Shaft Bearing - This Bearing is used with 405182R1-R, 528676R1, 104401C1 PTO shafts. 55mm ID x 100mm OD x 21mm W. HYDRO 100, 1066, 1086, 1466, 1468, 1486, 1586, 3388, 3588, 3788, 4166, 4186, 6388, 6588, 6788, 766, 786, 886, 966, 986. Replaces 70227C91, N1211 (Item #: 155911, Ref: 70227C91) $71.00

PTO Shield - Two Piece For 06 Series thru 86 Series with Dual Speed PTO. OEM# 1264520C1 1264503C1 (Item #: 103968, Ref: R0907) $79.00

Seats

Lower Back Seat Bracket Set, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 574, 606 (With Vertical Action), 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (With Vertical Action), 1206, 1256, 1456, 1466 (With Vertical Action), 1468 (With Vertical Action), 1566, 1568, 1586, 2656, 2706 (s/n 3000-later), 2756, 2806, 2826, 2856, 4156, 4166, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 715, 815, 915, Compatible with International Hay Cutting(s) 375, Compatible with International Rake / Tedder(s) 100, Replaces International OEM number 387172R1, 387173R1, Includes 2 Brackets, For a new version of this item use Item #: 112241, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412241) $24.76

Seat Adjustment Handle - For the following models: Hydro 100, 460, 504, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186. Replaces 372738R91, 372739R91, 373656R91, and 380725R91. (Item #: 105324, Ref: 1016119M91) $28.00

Seat Assembly - Black and white vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 101273, Ref: R1139) $590.00

Seat Assembly - Black vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 178440, Ref: R1140) $926.00

Seat Assembly - Black fabric on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 182099, Ref: R1141) $829.00

No
Picture
Seat Assembly - Red fabric on steel. For tractor models 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 100. (Item #: 180720, Ref: R1142) $890.00

Seat Back - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127287, Ref: R3662) $212.00

No
Picture
Seat Back - Black and white vinyl on wood. For 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 178317, Ref: R0987) $109.00

No
Picture
Seat Bottom - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 178307, Ref: R3661) $321.00

No
Picture
Seat Bottom - Black vinyl on steel. For 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127283, Ref: R0868) $167.00

Seat Bracket Set - Heavy gauge powder coated steel mounting brackets specifically designed for our IH6012 replacement cushion set. This bracket set replaces part numbers 387172R1, 387173R1, 387178R1. Hardware included. (Item #: 101255, Ref: IH6013) $58.00

Seat Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Compatible with International Hay Cutting(s) 275, 375, Replaces International OEM nos 379321R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431196) $31.01

Seat Cushion Set - Black and white leatherette upholstery. Kit contains seat, lower and upper backrest. For tractor models 70, 86, 504, 544RC, 574, 606, 656 before serial number 14500, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504, 2706, 2756, 4100, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $140.00

Seat Cushion Set - Seat cushion kit, black and white. Contains seat cushion, lower backrest and upper backrest. For tractors: Hydro 70, Hydro 86, Hydro 100, 504 Deluxe, 544 row crop, 656 prior to serial number 145000, 666, 686, 706, 756, 786, 806 prior to serial number 14500, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504 Deluxe, 2706, Deluxe, 2756 Deluxe, 4100, 4156, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $140.00

No
Picture
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $200.00

$Farmall 4166 Seat Cushion Set - 3 Piece, Vinyl, White\Black$
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $200.00

Seat, Shock Absorber - For tractor models 460, 504, 544, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, 2504, 2544, 2706, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 414 Cotton Picker, 420 Cotton Picker. Replaces 372751R91, IHS646. (Item #: 105342, Ref: 400072) $53.58

No
Picture
Seat Upper Back - Black and white vinyl on steel with original style pleated covering. For tractor models 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 178315, Ref: R3663) $145.00

No
Picture
Seat Upper Back - Black vinyl on steel. For tractor models 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 112547, Ref: R0870) $73.00

Spring Seat, Rubber - For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 460, 504, 544, 560, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1468, 1568, 4100, 4156, 4166, 4186, 656, 660, Hydro 100, Hydro 70, Hydro 86. Some of these models have a different seat (earlier version) that the left and right springs are different pin configurations and the center shaft has a collar that sticks up above the rubber..... These are not available. (Item #: 101285, Ref: 380712R1) $33.20

Steering

Steering Wheel - For Late 140, 240, Farmall 300 (not utility), 340, 350, 400, 404, 424, 444, 450, 460, 560, 4100, 4166, 4186. Steering Wheel 18 inch diameter, 7/8 inch 36 splined hub. Replaces OEM part number 366557R1, 366557R2, 366557R91. (Item #: 101431, Ref: R3217) $42.10

Steering Wheel - With 7/8 inch splined hub. For tractor models 140, 350, 404, 424 without power steering, 444 without power steering, 450, W450, 460, 504, 560, 2404, 2424 without power steering, 2444 without power steering, 4100, 4156, 4166, 4186, Combines: 105, 203, 205 to serial number 1289. Steering wheel 17 3/8 inch diameter, 7/8 inch hub, for splined shaft. Does not come with center cap. (Item #: 101431, Ref: 366557R2) $42.10

Steering Wheel Boot - Rubber cover for Orbit Motor. For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186, Hydro 70, Hydro 86, Hydro 100. Replaces IHS682. (Item #: 126655, Ref: 382587R1) $17.20

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $63.00

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $70.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Tie Rod End - Tie rod end, right-hand, threaded, 3-7/8 to center of post. For tractors: 666, 686, Hydro 70 and 86, Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, 5288, 5488. Not for drilled style TRW tie rod parts. For 1026, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 4156, 4166, 4186, 5088, 5288, 5488, 666, 686, 756, 766, 786, 826, 856, 886, 956, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. Replaces 384006R1, 384006R93, 384006R92 (Item #: 100866, Ref: 384006R92) $16.40

No
Picture
Tie Rod End, Inner - Left Hand - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384005R91, 3.75" Long, 1" Diameter, 16 Left Hand Thread, (Item #: 100873) $19.00

Tie Rod Tube - Tie rod tube. 18 inches long, .950 inch inside diameter, .941 inch inside diameter thread. 2 slots one end, threads other end. For 56 to 80 on tractors: 666, 686, Hydro 70 and 86. Not for drilled style TRW tie rod parts. For 1026, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 4156, 4166, 4186, 5088, 5288, 5488, 666, 686, 756, 766, 786, 826, 856, 886, 956, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 100868, Ref: 383917R1) $22.87

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.60

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $16.90

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.30

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.80

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.10

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $29.70

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $35.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.50

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.80

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $13.80

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.30

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.10

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.10

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.40

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $13.80

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $24.80

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.20

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.10

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.10

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.40

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $13.60

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.20

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70

$Farmall 4166 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Farmall 4166 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Farmall 4166 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall 4166 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Farmall 4166 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Farmall 4166 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Farmall 4166 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

$Farmall 4166 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $373.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $444.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $444.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $42.20

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $40.80

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $40.00

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $57.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.10

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.40

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $13.98

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $37.70

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00