FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 544 Tractor Parts

[Categories] [All Farmall Models] [Print]

Belts

Fan Belt - For International / Farmall tractor model 544, Compatible with International Combine (s) 615, 715 (s/n 23001-earlier), Replaces OEM number 403303R1, 0.453" x 55.07" Automotive Polyester Cogged Cord, (Item #: 182144) $8.80

Brakes

Brake Actuating Spring - Used with disc brakes. For tractor models H, HV, Super C, Super H, O4, OS4, W4, 200, 230, 240, Farmall 300, 330, 340, Farmall 350, 404, 460, 504, 544, 606, 2404, 2504, 2544, 2606, 203, 205, 315, 615. Replaces: 354627R1 (Item #: 116863, Ref: A30910) $7.70

Brake Actuator Assembly - For International / Farmall tractor models 544, 2544, Replaces International OEM number 404919R91, (Item #: 105439) $246.00

Brake Disc - Bonded - For International / Farmall tractor models 544, 2544, Replaces International OEM number 1975462C3, 404918R1, Internal Splines: 10, Outer Diameter: 6.000", Inner Diameter: 1.838", (Item #: 105458) $31.60

No
Picture
Brake Operating Rod and Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 330, 340 (Farmall and International), 460 (Farmall and International), 504 (Farmall and International), 544 (Farmall and International), 606 (gas), 656 (Farmall and International), 664, 666 (gear drive), 686 (gear drive), 2504, 2544 (diesel), 2606 (diesel), 2656 (diesel), Replaces International OEM number 403840R2, 368297R1, 403840R1, 368297R11, 388271R1, (Item #: 111363) $114.00

Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $13.50

Brake Pedal Return Spring - Used with band brakes. For tractor models (2544, 544 clutch pedal return), H, HV, M, MD, MDV, MV. 8-1/8 inch overall length. (Item #: 125749, Ref: 48599DA) $9.00

Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $15.50

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Disc Brake Boot - For tractor models 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 70, Hydro 86, 2544, 2606, 2656. (Item #: 112346, Ref: 368299R1) $9.50

Clutch

Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $6.90

No
Picture
Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-3/4 inch 16 spline, 13/16 inch pilot. For tractor models 300, 330, 340, 350, 504, 544, 606, 656, 2500, 2504, 2544, 2606, 2656, (3444 with dial 9 inch, 11 inch discs). (Item #: 122257, Ref: S.70921) $26.30

No
Picture
Clutch Alignment Tool - 1-1/8"x10 and 1-11/16"x16 Spline, .787" Pilot - For International / Farmall tractor models 300, 330, 340, 350, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, 3616, Pilot Diameter: .787", 1st Spline: 1-1/8", 10 Spline, 2nd Spline: 1-11/16", 16 Spline, (Item #: 176767) $43.60

$Farmall 544 Clutch Alignment Tool - 1-3\32 inchx10 and 1-11\16 inchx16 Spline$
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $26.30

Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $21.00

Clutch Bearing Seal Kit - For International / Farmall tractor models 300, 350, 460, 544, 606, 656, 664, 666, 686, 2544, 2606, 2656, Contents: 1-832375 Release Bearing, 1-836304 Pilot Bearing, 1-363514 IPTO Seals, 1-2385243 IPTO Bearing Cage O-Ring and 252556 IPTO Bearing Cage O-Ring, (Item #: 108786) $81.00

Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $128.00

Clutch Disc - For International / Farmall tractor models 504 (Farmall Gas or Diesel, /60-12/68), 504 (Gas or Diesel, /60-12/68), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 560 (Farmall Gas or Diesel, 1/58-12/63), 560 (Gas or Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 660 (Gas or Diesel, 1/59-12/63), 664 (Diesel, 1/72-12/73), 666 (Gear Drive, 1/72-12/72), 686 (Gear Drive, 1/69-12/71), 2504, 2544 (Diesel), 2606 (Diesel, 1/61-12/67), 2656 (1/63-12/71), Replaces International OEM number 375701, 1-1/2", 6 Spline, (Item #: 166109) $122.00

Clutch Disc, Organic - New, 10.5 inch, spring loaded, 1.125 inch spline diameter, 10 splines. For tractor models 2500, 2504, 2544, 2606, Farmall 300, 330, 340, Farmall 350, (3616 diesel serial number up to 2117 or gas up to serial number 1945), 460, 504, 544, 606. (Item #: 156475, Ref: 360488R92) $96.00

Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00

Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2404, 2544, 2606, 3616, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 384633R91, 384633R91R, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 205053) $175.50

Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, 3616, Replaces International OEM number 384633R91, 384633R91R, H384633, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 205990) $95.00

$Farmall 544 Clutch Kit, 10-1\2 Inch$
Clutch Kit, 10-1/2 Inch - This remanufactured single stage clutch kit includes a 10 1/2 inch, 9 spring, 16 spline, 1 11/16 inch hub remanufactured pressure plate assembly, a 10 1/8 inch, 10 spline, 1 1/8 inch hub, 4 pad remanufactured clutch disc; new release bearing and two new pilot bearings. For tractors: 300, 320, 330, 340, 350, 460, 504, 544, 606. Industrial: 2500, 2504, 2544, 2606, 3616 (gas to serial number 1945 and diesels to serial number 2117). (Item #: 202008, Ref: 360746NC) $329.60

Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60

Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00

Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01

Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50

Pressure Plate Assembly, Remanufactured, 360746-R - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, Compatible with International Construction and industrial models 3616, Replaces International OEM number 360746-R, 376360R1, 376360R94, 376360R94R, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, (Item #: 204409) $112.00

Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01

Pressure Plate, Remanufactured - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2500, 2504, 2544, 2606, 3514, 3616, 8000, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206066) $122.01

PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $62.00

T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.60

Cooling System

Fan, 6 Blade - 20.940 inch diameter, 1.250 inch pilot hole, 1.945 inch center to center on mounting bolt. For tractor models (2544, 544 diesel/gear drive), (2656 diesel), (Farmall 2706, 706 serial number 19250 and up, IH serial number 3000 and up), (544 gas/syncromesh trans), (656, 664 diesel). (Item #: 107023, Ref: A173726) $212.00

Radiator - This radiator measures 19 1/8 inches across the fins, 20 3/8 from the top of the fins to the bottom of the fins and 2 7/8 inches wide. For tractor models 666, Hydro (serial number 10522 and up), 756 Gas, Farmall 544 Gas-Gear drive, 706 Gas (serial number 37237 and up). Also replaces 396351R9 and 403649R1. (Item #: 101717, Ref: 65426C1) $498.00

Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.60

Radiator Hose Lower - Radiator hose, lower, for gas tractor. For 544 (Item #: 117704, Ref: 400943R1) $25.50

Radiator Hose Lower - Radiator hose, lower. For 544, 664 (Item #: 116803, Ref: 402215R1) $22.20

Radiator Hose Lower - Radiator hose, lower, for Farmall gas tractors. For model 544. (Item #: 116829, Ref: 401426R1) $13.10

Radiator Hose Upper - For tractor models 544 gas, 644. (Item #: 116806, Ref: 401425R1) $25.50

Radiator Hose Upper - For tractor models 544, 664. (Item #: 116812, Ref: 402212R1) $23.40

Radiator Hose Upper - Radiator hose, upper, for Farmall diesel. For model 544. (Item #: 159462, Ref: 402346R1) $18.80

Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $20.50

Radiator, Premium Used - For International tractor models Hydro 70, Hydro 86, 544, 666 (s/n 10552-later), 686, 706 (s/n 37237-later), 756, 766, 2544, 2756 (all Gas), Replaces International OEM number 65426C1, 396351R1, 403649R1, Our premium used radiators have been cleaned, inspected, and pressure checked, For a new version of this item use Item #: 101717, Additional Handling and Oversize Fees Apply To This Item, (Item #: 300304) $327.01

Water Pump - New Water Pump with gasket. Fits; 2544 with D239 Engine, 4230, 4240, 544 with German Diesel, 884, 885, 895, 995. 8 Fins on Impeller. Replaces; VPE1021, 3132739R93, 3132739R93-R, 3132739R94, 3136053, 3136053R92, 3132739R94, 3136053R91, 735102C91, 3136053R93. (Item #: 102183, Ref: 3132739R92) $69.00

Water Pump - For tractor models 523, 533, 544, 633, 644, 654, 724, 744, 824, 844, 844S. All with D239 engine. (Item #: 102182, Ref: 3136217R92) $88.00

Water Pump - Does not come with rubber mounting seal or back plate. For tractor models 2544, 3400A, 3414, 3500A, 3514, 4500A, 4500B, 454, 464, 544, 574, 674. All with either C157, C175 or C200 engines. (Item #: 110070, Ref: 400677R92) $115.00

Water Pump Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2500A, 2500B, 2544, 8000 (LIFT TRUCK), Replaces International OEM number 397968R2, (Item #: 154674) $2.00

Water Pump, Remanufactured, 400677R92, 397965R2 - For International / Farmall tractor models 454, 464, 544, 574, 674, 2544, 3514, Compatible with International Construction and industrial models 260, 2400A, 2400B, 2500A, 3400A, 3500A, 4500, Replaces International OEM number 400677R92, 397965, Replaces International Casting number 397965R2, Engine: C157, C175, C200, Includes pump to backplate gasket, Includes backplate to block gasket, Includes bypass seal, With hub, Without backplate, (Item #: 205223) $117.01

Decals and Emblems

Chassis Decal Set - Vinyl - International Chassis Decal Set - Vinyl Die Cut. DOES NOT INCLUDE HOOD SET. For tractor models: 424, 444 US Built, 544, 656, 686, HYDRO 70, HYDRO 84. (Item #: 183256, Ref: R0548V) $67.00

No
Picture
Decal Set, Chassis - Vinyl cut decal set. For model 544 gas. (Item #: R0542) $47.12

No
Picture
Decal Set, Chassis - Vinyl cut decal set. For model 544 Hydro with gas engine. (Item #: R0544) $47.12

No
Picture
Decal Set, Hood - Black and chrome. For model 544. (Item #: 183694, Ref: R1886) $236.00

Front Emblem - Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86. (Item #: 108481, Ref: 2751846R1) $19.10

Front Emblem - Plastic "IH" red, black and white, 3-7/8 inch x 3-1/2 inch. Center to center measurement on the mounting posts is 2-17/32 inch. For tractor models 544, 656, 664, 706, 2544, 2656, 2706, 4100, 4156, 4166, 4186, 4366, 4386. (Item #: 107904, Ref: 2751848R1) $19.80

Grille Emblem - For International / Farmall tractor models 544, 656, 706, 4100, 4156, 4166, 4186, 4366, 4386, Replaces International OEM number 2751845R1, Height:4", Chrome plated die cast, (Item #: 107905) $44.00

Grille Emblem - For International / Farmall tractor models Cub (184), Hydro 70, Hydro 86, Hydro 100, Hydro 186, 140, 240, 340, 404, 424, 444, 544, 606, 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2400A, 2500A, Replaces International OEM number 368523R4, Height:3-3/8", Made of die cast metal, (Item #: 108482) $51.00

Hood Ornament, Chrome - For tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544. (Item #: 108483, Ref: 369180R1) $76.00

Hood Ornament, Used - For International tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2826, Replaces International OEM number 369180R1, Chrome finish, For a new version of this item use Item #: 108483, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435392) $43.20

$Farmall 544 IH Decal, 1-5\8 inch, Vinyl$
IH Decal, 1-5/8", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1 5/8", no background, (Item #: 101024) $2.60

IH Decal, 1", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1", no background, (Item #: 101023) $1.70

$Farmall 544 IH Decal, 3 inch x 3-1\2 inch, Vinyl$
IH Decal, 3" x 3-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 3" x 3-1/2", No background, (Item #: 101025) $10.20

$Farmall 544 IH Decal, 4-1\2 inch x 5 inch$
IH Decal, 4-1/2" x 5" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 4-1/2" x 5", Mylar decal, (Item #: 101095) $5.10

International Decal, 17", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 17" long, Black, Mylar decal, (Item #: 101105) $5.10

$Farmall 544 International Decal, 8-1\2 inch, Mylar$
International Decal, 8-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 8 1/2" long, Black, Mylar decal, (Item #: 101104) $3.40

International Decal Set,10" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 10", (Item #: 101022) $27.10

$Farmall 544 International Decal Set, 1 1\4 inch IH Logo, Vinyl$
International Decal Set, 1 1/4" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-1/4", (Item #: 101018) $2.60

$Farmall 544 International Decal Set, 1 3\4 inchx 1 5\8 inch IH Logo, Vinyl$
International Decal Set, 1 3/4"x 1 5/8" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-3/4", (Item #: 101019) $3.40

No
Picture
International Decal Set, 6 1/2"x 7" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo 7", Vinyl Cut, Shaded Outline, (Item #: 101020) $15.30

No
Picture
International Decal Set, 7 1/4"x 8" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 8", (Item #: 101021) $20.30

$Farmall 544 International Harvester Decal, 2-3\4 inch x 3 inch$
International Harvester Decal, 2-3/4" x 3" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, (Item #: 101093) $3.40

$Farmall 544 International Harvester Decal, 2 inch x 2-1\2 inch, Mylar$
International Harvester Decal, 2" x 2-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/2", No background, Mylar decal, (Item #: 101097) $3.40

$Farmall 544 International Harvester Decal, 2 inch x 2-1\4 inch, Mylar$
International Harvester Decal, 2" x 2-1/4", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/4", Mylar decal, (Item #: 101092) $3.40

$Farmall 544 International Harvester Decal, 5-1\2 inch x 6 inch, Mylar$
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", Mylar decal, (Item #: 101096) $5.10

International Harvester Decal, 5" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 5" diameter, Shaded outline, Mylar decal, (Item #: 101099) $5.10

International Harvester Decal, 6" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 6" diameter, Shaded outline, Mylar decal, (Item #: 101100) $6.80

$Farmall 544 International Harvester Decal, 7-1\2 inch, Mylar$
International Harvester Decal, 7-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 7 1/2" diameter, Shaded outline, Mylar decal, (Item #: 101101) $8.50

International Harvester Decal, 9", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 9" diameter, Shaded outline, Mylar decal, (Item #: 101102) $10.20

$Farmall 544 International Hood Decal, 23-1\2 inch, Vinyl$
International Hood Decal, 23-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, Size: 23-1/2", Black lettering, (Item #: 101031) $13.60

International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.10

McCormick International Decal, 10" Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 10" long, Black and white, Vinyl decal, (Item #: 101103) $8.50

$Farmall 544 McCormick International Decal, Hood, White\Black, 7-1\4 inch, Vinyl$
McCormick International Decal, Hood, White/Black, 7-1/4", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 7-1/4" black and white, Vinyl decal, (Item #: 101026) $6.80

Drive Train

1st And Reverse Slider Gear - This 1st and Reverse Slider Gear has 14 splines and 57 teeth. It is used on 2544, 2656, 544, 656, 664, 666, 686 and replaces original part number 388165R1. (Item #: 111280, Ref: 388165R1) $179.00

4th Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388151R1, Teeth: 44, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430779) $263.01

Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $16.10

Clutch Shaft Carrier Seal - This clutch shaft carrier seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. Fits (340, 460, 504, 656 fits as a clutch shaft carrier seal for forward and reverse transmissions), (544, 606, 665 fits as a forward/reverse transmission seal). Replaces: 350891R91, 358801R91, 358836R91, 370510R91, 371410R91, 515448R91. (Item #: 165141, Ref: 195501M1) $5.48

Gear Shift, Torque Amplifier, Forward, Reverse Knob - For tractor models 544, 656, 664, 666, 686, 2544, 2656, 2826, 3488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 826, 966, 1026, 1066. (Item #: 111042, Ref: 388180R2) $14.70

Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Hand Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, (Item #: 200264) $7280.01

No
Picture
Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Foot Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 205088) $8100.01

PTO Shaft 540 RPM - For International / Farmall tractor models Hydro 70, Hydro 86, 544 (w/ Independent Live PTO), 656 (w/ Independent Live PTO), 664 (w/ Independent Live PTO), 666, 686, 2544 (w/ Independent Live PTO), 2656 (w/ Independent Live PTO), Replaces International OEM number 389132R2, 71260C1, 389132C1, Tooth Front Splines: 17, Length: 11.963", (Item #: 128493) $240.00

Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01

Shift Fork, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388172R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441395) $117.01

Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $316.00

Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $45.20

Torque Amplifier Gasket Set - For tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686. (Item #: 115574, Ref: 395915) $87.00

Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Item #: 113413, Ref: 361283R32) $188.00

No
Picture
Transmission Shift Handle Housing, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388181R2, Replaces International Casting nos 388181R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445760) $278.01

Electrical System

Alternator - Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100. (Item #: 113606, Ref: 1100883) $123.00

Alternator - 12 volt, 55 amp. For tractor models (105, 205 1968 to 1970 with 153 gas), (315 1968 to 1970 with BD-331), (403 1968 to 1970 with 301 diesel/263 gas), (503 1968 to 1969 with 282 gas/301 diesel), (615 1971 with 263 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720. (Item #: 113606, Ref: ADR0231) $123.00

Alternator - 12 volt, 55 amp. For tractor models (856D 1967 to 1971 with 407 diesel), (1026D, Hydro 1026D 1970 to 1971 with 407 diesel), (1206D 1965 to 1967 with 361 diesel), (1256D 1967 to 1969 with 407 diesel), (1456D 1969 to 1971 with 407 diesel), (444 1967 to 1971 with 153 gas), (454 1970 to 1971 with 157 gas), (454D 1970 to 1973 with 179 diesel), (544 1968 to 1973 with 200 gas), (544D 1968 to 1973 with 239 diesel), (574 1970-72 with 200 gas), (574D 1970-72 with 239 diesel), (606 1965 to 1967 with 221 gas/LPG), (606D 1965 to 1967 with 236 diesel), (2444 1968 to 1970 with 153 gas), (2444D 1968 to 1970 with 154 diesel), (2544 1969 to 1970 with 200 gas), (2544D 1969 to 1970 with 239 diesel), (2656 1971 to 1972 with 263 gas/LPG), (2656D 1971 to 1972 with 268 diesel), (2756 1967 to 1971 with 291 gas/ 310 diesel), (2806 1965 to 1967 with 301 gas), (2806D 1965 to 1967 with 361 diesel), (2826 1970 to 1971 with 301 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720, 1100771. (Item #: 113606, Ref: ADR0231) $123.00

Battery Cover - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, 2656, Replaces International OEM number 388219R1, 538585R2, 538585R1, Does not fit utility models, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 104019) $77.00

Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $17.00

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90

Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.30

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $29.30

Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $30.00

No
Picture
Starter - Delco (4271, 4282) - For International / Farmall tractor models Hydro 70 (Gas), Hydro 86 (Gas), 504 (s/n: 15261-later, Farmal Diesel), 504 (s/n: 17830-later, Diesel), 544 (Hydro, Gas), 656 (Hydro, Gas, Late s/n), 656 (s/n: 36467-later, Hydro, Farmal, Gas), 666 (Hydro, Gas), 3616 (1967-70, Diesel), Compatible with International Construction and industrial models 2504 (s/n: 15261-later, Diesel), 2504 (s/n: 17830-later, Diesel), 3514 (1967-69, Diesel), 3514 (1970-71, C173 Hydro, Gas), Replaces Case IH OEM number 369459R93, 396459R91, Replaces Delco Remy manufacturer number 1107854, 1107855, 1998496, 323-691, Replaces Starter number 4271, 4282, Lester 4271, 4282, Volts: 12, Rotation: Counter Clockwise (CC), Direct Drive, Teeth: 10, (Item #: 189419) $421.00

No
Picture
Starter - Delco Style DD (3934), Remanufactured, Delco Remy, 1113198, 400121R92 - For International / Farmall tractor models 544 (with D239), 656 (with D282), 666 (with D312), 2544 (with D239), 2656 (with D282), Replaces International OEM number 400121R92, Replaces Delco Remy manufacturer number 1113198, 1113187, Replaces manufacturer number 3934, 141-112, 141-112B, 91-01-4033, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 12, (Item #: 203416) $515.00

No
Picture
Starter - Delco Style DD (4236) - For International / Farmall tractor models 504, 544, 656, 666, 686, 2544, 2656, Compatible with International Combine (s) 151, 181, 615, 715, 815, 915, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 396523R92, 396523R93, 396556R92, Replaces Case OEM number 104193A1, 396522R91, A485615Z, Replaces Delco Remy manufacturer number 1108343, 1108344, 1109360, 323-635, 1998283, Replaces manufacturer number 4236, 140-746, 140-746A, 91-01-4181, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For gas applications, For a Remanufactured version of this sku use Item #: 203453, (Item #: 160374) $324.00

Starter Delco Style DD (4236), Used - For International tractor models 504 (Gas), 544 (Gas), 656 (Gas), 666 (Gas), 686 (Gas), 2544 (Gas), 3514, 3616 (all C-221 Gas), Compatible with International Combine(s) 815, 915 (all gas), Replaces International OEM number 396523R92, 1108344, 1109360, 140-746, 396522R91, 396523R93, 396556R92, 4236, 44-4527, 74236, A485615Z, 1108343, Delco 12 Volt, CCW, 10 Tooth Drive, For a new version of this item use Item #: 203453, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403453) $194.01

Starter Drive - Starter drive, services Delco starter: 1113198. Tractors: 544, 656, 664, 666, 2544, 2656. 12 teeth. For 2544, 2656, 544, 656, 664, 666 (Item #: 179267, Ref: 1965788) $46.10

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

No
Picture
Starter, Rebuilt - A rebuilt Delco start that is 12 volts, counter clockwise rotation and has a 10 tooth starter drive for (544, 2544, 656, 2656, all Gas with ST, 1967 to 1973), (3514, 3616 Gas 1967 to 1973), (504, 3514 Gas 1969 to 1974), (C-200, 263 Gas 1968 to 1970), (3514 with C-173 Engine with ST 1969 to 1970), (915 Gas Combines 1969 to 1974), (666 with ST 1972 to 1974), (F-686 AG Tractor 1977 to 1979), (706 Gas 1967 to 1968), (766 Gas 1967 to 1968). REBUILT Starter. 12 Volt). Replaces 1108343. (Item #: 203453, Ref: TS-1230) $359.57

Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.20

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.50

Tune-up Kit - Kit contains points, condenser, rotor, gap gauge and AL386 spark plugs. VERIFY SPARK PLUG SIZE as this kit comes with AL386 that are 18MM, 1/2 inch reach and 7/8 hex size. For tractor models 454, 464, 544, 574, 674 all with 4 cylinder engines all with a Delco Distributor with a screw type cap. Verify correct spark plug size and type (Item #: 182530, Ref: MF-ITK-40) $25.90

Engine Bearings

Camshaft Bearing, Front - The Bearing is used on C157 engines in models: 2400A, 2400B, 2405B, 2410B, 454; C175 Engines on models: 2400A, 2400B, 2405B, 2410B, 3400A, 3514, 454, 464; C200 Engines on models: 544, 574, 674. To complete the cam bearing set for these engines, also order CBK-H221 (you will not use this whole set). (Item #: 106668, Ref: 398019R1) $88.00

Camshaft Bearing - Intermediate - For International / Farmall tractor models 454, 544, 574, 674, 2400A, 2400B, Compatible with International Harvester (s) 55, 350, 414, 420, 550, 650, Compatible with International Engine (s) C157, C200, Replaces International OEM number 70261R2, Requires 1 per engine, Sold Individually, (Item #: 106669) $91.00

Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10

Camshaft Bearing - Rear - For International / Farmall tractor models 454, 544, 574, 674, 2400A, 2400B, Replaces International OEM number 70262R1, Engine C157, C200, Requires 1 per engine, (Item #: 106670) $70.00

No
Picture
IPTO Bearing Cage O-Ring - For International / Farmall tractor models 330, 340, 460, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 252556, (Item #: 176724) $6.90

Main Bearings - .010" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106603, (Item #: 106601) $97.00

Main Bearings - .020" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106603, (Item #: 106602) $144.00

Main Bearings - .030" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106602, (Item #: 106603) $71.98

No
Picture
Main Bearing Set, .010 - For tractor models 474, 584, 585. (D206 CID Diesel 4-cylinder engine. Cupped head piston) and models: 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 106608, Ref: MBK239D-010) $59.00

No
Picture
Main Bearing Set, .020 - For tractor models 474, 584, 585. (D206 CID Diesel 4-cylinder engine. Cupped head piston) and models: 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 106609, Ref: MBK239D-020) $154.00

No
Picture
Main Bearing Set, Std - For tractor models 474, 584, 585. (D206 CID Diesel 4-cylinder engine. Cupped head piston) and models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 106607, Ref: MBK239D) $63.00

Main Bearings - Standard - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106603, (Item #: 106600) $145.00

Pilot Relief Valve, Used - For International tractor models 544, 656, 664, 666, 686, 756, 2544, 2656, 2756, 2826, Replaces International OEM nos 389033R93, 1600 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431146) $89.01

No
Picture
PTO Shaft Seal - For International / Farmall tractor models 544, 656, 664, 666, 686, 706, 756, 766, 786, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (prior to s/n 25999), 2544, 2656, 2756, 2826, 3088, 3288, 3388, 3688, 6388, 21206, 21256, 21456, Replaces International OEM number 381480R1, 472258, 634036, CR13569, (Item #: 111619) $6.40

Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $8.80

No
Picture
Rod Bearing, Standard - For tractor models 544, 574, 674 all with C200 gas engine. (Item #: 106485, Ref: CB-550P) $13.20

Engine Gaskets

Conversion Gasket Set - For International / Farmall tractor models 454, 460, 544, 574, 606, 674, 2400, 2400A, 2400B, 2500A, 2500B, 2606, 3616, Compatible with International Construction and industrial models 2505B, 3500A, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 398178R92, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, Crankshaft seals included, (Item #: 106724) $145.00

Conversion Gasket Set - Lower - For International / Farmall tractor models Hydro 84, 544, 574 (Engine s/n D103203-later), 584 (Engine s/n D319017), 585, 624, 654, 664, 674, 684 (Engine s/n D475097), 685 (Engine s/n D679081-later), 784, 884 (Engine s/n D052919-later), 885, 2500 (Engine s/n D103203-later), 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7, TD7 (E, Engine s/n 53692-later), TD8 (C), TD8 (E, Engine s/n 5988-later), 100, 100 (E, Engine s/n 53692-later), 125, 125 (C), 125 (E, Engine s/n 5988-later), 250A (Gear Drive, Engine s/n 640235-later), 260A (Engine s/n 706836-later), 270A, Compatible with International Engine (s) D206, D239, D246, D268, DT268, Compatible with International Hay Cutting (s) 275, 375, 4000 (Engine s/n D021186), 5000 (Engine s/n D021186), 5500 (Engine s/n D021186), Replaces International OEM number 1967011C1, 3136813R99, 3228431R92, Replaces McCormick OEM number 3228431R92, Contains all gaskets necessary to complete an overhaul that are not included in head set, (Item #: 106727) $59.00

Front Crank Seal - Diesel - Front seal package contains seal and wear ring. For tractor models with diesel engines: 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 162141, Ref: 3228133R93) $60.00

Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.20

No
Picture
Gasket Set - Complete Gasket Set For tractor models 474, 584, 585. (D206 CID Diesel 4-cylinder engine. Cupped head piston.)and Models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston.) (Item #: 181735, Ref: GK4239D) $330.00

Head Gasket Set - For tractor models 544, 574, 674 with C200 Gas 4 Cyl Engine. (Item #: 106685, Ref: HS3535) $98.00

No
Picture
Head Gasket Set Diesel - For 544, 574, 674, 684 with D239 Diesel Engine (Item #: 106688, Ref: HS3557) $53.00

No
Picture
Lower Gasket Set, Diesel - For tractor models 2544, 474, 544, 574, 584, 585, 664, 674, 684. All with 239 diesel engines. (Item #: CS4239D) $230.94

No
Picture
Lower Gasket Set Gas - For tractor models 424, 444, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B all with C157 gas engine and 544, 574, 674 all with C200 gas engine. (Item #: 185102, Ref: CS3535) $138.00

Oil Pan Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, Compatible with International Construction and industrial models 2400A, 2400B, 3514, Replaces International OEM number 405858R1, Engine: C-157, C-200 Gas, Oil Pan Gasket Only, (Item #: 106704) $22.00

No
Picture
Oil Pan Gasket Diesel - OIL PAN GASKET For 2544, 474, 544, 574, 584, 585, 664, 674, 684 all with 239 diesel. (Item #: 106705, Ref: 3055161R3) $13.90

Push Rod Cover Gasket - This Push Rod Cover Gasket is used on C157, C175 and C200 Engines. Used on 2400A, 2400B, 2405B, 2412B, 2410B, 3500A, 2505B, 574, 544, 2500B, 2500A, 2544, 2510B, 2514B, 674, 3514, 3400A, 464, 375. Replaces 398040R2, 398040R3 (Item #: 184154, Ref: 398040R2) $18.40

Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $21.90

Valve Cover Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 3514, Compatible with International Engine (s) C157 (gas), Replaces International OEM number 398068R3, 398068R1, 398068R2, 398068R4, Replaces manufacturer number 7398068, (Item #: 158261) $16.60

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings - For tractor models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130527, Ref: BEKH239D-LCB) $638.00

No
Picture
Basic In-Frame Engine Kit - For tractor models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189676, Ref: BIFH239D) $870.00

No
Picture
Engine Overhaul Kit, Less Bearings - For tractor models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). Kit Contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK239D-LCB) $917.29

Engine Rebuild Kit - Less Bearings - .020" Oversize Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Standard Bore: 3.8125", Stroke: 4.390", Kit includes: .020" Oversize Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, (Item #: 131093) $556.00

Engine Rebuild Kit - Less Bearings - .030" Oversize Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Standard Bore: 3.8125", Stroke: 4.390", Kit includes: .030" Oversize Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, (Item #: 131094) $573.00

No
Picture
Engine Rebuild Kit - Less Bearings - Standard Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Bore: 3.8125", Stroke: 4.390", Kit includes: Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130602) $556.00

No
Picture
In-Frame Overhaul Kit - 3 7/8 inch bore. For 544, 574, 674, 684 with D239 Diesel Engine. Contains pistons with pins and retainers, piston sleeves, piston rings, head gasket set, oil pan gasket set, rod bearings, main bearings. (Item #: 184904, Ref: R3403-IFK) $1389.01

Piston and Rings International 392836R92 - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2806, 2826, 2856, Compatible with International Engine (s) C200, C301, Replaces International OEM number 392836R92, .30" Oversize, Includes pin and retainers, (Item #: 128737) $84.00

No
Picture
Rebore Kit - .020 Oversize. For tractor models 544, 574, 674 with C200 Gas Engine. (Item #: R4862) $358.80

No
Picture
Rebore Kit - 3 13/16 inch bore. For tractor models 544, 574, 674 with C200 Gas Engine. (Item #: R3399) $358.80

No
Picture
Rebore Kit - .040 Oversize. For tractor models 544, 574, 674 with C200 Gas Engine. (Item #: R3401) $385.80

No
Picture
Valve Overhaul Kit - For tractor models 474, 584, 585, 544, 574, 664, 674, 684, 2544 (4 cylinder Diesel D206, D239 CID). Kit includes valves, valve springs, valve keys, valve guides. (Item #: 184184, Ref: VOKH239) $846.00

Engine Parts

1st and Reverse Sliding Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 388165R1, Teeth: 57, Splines: 14, For a new version of this item use Item #: 111280, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411280) $77.01

3rd Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388150R1, Teeth: 37, Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409376) $153.01

Bull Pinion and Brake Shaft, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388285R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441505) $245.01

No
Picture
Camshaft Bearing Set - For International / Farmall tractor models Hydro 84, 544, 574, 584, 585, 624, 654, 664, 674, 684, 685, 784, 844, 884, 885, 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7 (E), TD8 (E), TD8 (C), 100 (E), 100, 125 (E), 125 (C), 125, 250A, 260A, 270A, 584, 2500B, 2505B, 2510B, Compatible with International Engine (s) D206, D239, D246, D268, D358, Compatible with International Hay Cutting (s) 275, 375, 4000, 5000, 5500, 5 journal camshaft, finished I.D., (Item #: 186179) $102.00

Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01

Clutch Shaft Coupler - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, For applications with mechanical TA, Coupler Does Not Include Part 364411R1 Snap Ring, (Item #: 113408) $59.00

Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01

Countershaft Drive Gear, 3rd Speed, Used - For International tractor models 504, 544, 606, 2504, 2544, 2606, Replaces International OEM nos 374288R2, 3rd Speed, Teeth: 38, Splines: 17, Inside Diameter: 2.248", Outside Diameter: 5.705", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436754) $111.01

No
Picture
Crankshaft, Remanufactured, 397817R - For International / Farmall tractor models 544, 574, 674, Compatible with International Engine (s) C175, C200, Replaces Casting number 397817R, Straight tooth balancer gear, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200247) $570.01

Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30

No
Picture
Cylinder Head, Remanufactured, 3055049R - For International / Farmall tractor models 544, 574, 674 (Diesel), Replaces International Casting number 3055049R, Engine D239, Cylinders 4, Casting No. 3055049R, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200206) $1000.01

No
Picture
Cylinder Head, Remanufactured, 398065R - For International / Farmall tractor models 454, 464, 544, 574, 2400, 3514 (Gas), Compatible with International Construction and industrial models 3514 (Gas), Replaces International Casting number 398065R, 406790R, Engines C-157, C-175, C-200, Cylinders 4, Casting No. 398065R, 406790R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200205) $950.01

No
Picture
Cylinder Head with Valves, Remanufactured, 3055049R - For International / Farmall tractor models 544, 574, 674, Replaces International Casting number 3055049R, Engine D239, Cylinders: 4, Casting No. 3055049R, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 203926) $1350.01

No
Picture
Cylinder Head - with Valves, Remanufactured, 398065R - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400, 3514 (all gas), Compatible with International Engine (s) C157, C175, C200, Replaces Casting number 398065R, 406790R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 207264) $1150.01

Drive Shaft Coupling, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, Splines: 14, For a new version of this item use Item #: 113408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435618) $31.01

No
Picture
Engine Block - Bare, Remanufactured, International C200, 397974R, 397924R - For International / Farmall tractor models 544, 574, 674, Compatible with International Engine (s) C200, Replaces Casting number 397974R, 397924R1, Our remanufactured bare blocks have been; cleaned, inspected, (Item #: 204850) $1100.01

No
Picture
Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.00

Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90

Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40

Ring Gear, Flywheel - Has 133 teeth. Fits tractors: HYDRO 70 (with C-291, D-312 Engines), HYDRO 86 (with C-291, D-310, D-312 Engines), 504 (Gear and Hydro Drive with D-188 Engine serial number 13676->), 544 (with C-200 Engine), 656 (Gear and Hydro Drive with C-263 engine/Hydro Drive with D-282 Engine, 666 (Gear and Hydro Drive with C-291 Engine/Hydro Drive with D-312 Engine, 686 (Gear Drive with C-291 Engine).INDUSTRIAL/CONSTRUCTION: 2504 (gear and Hydro Drive with D-188 Engine 2544 (with C-200 Engine), 3500A (with C-200 Engine), 3514 (Gear and Hydro Drive with D-188 Engine, 3514 (with Synchromesh Transmission with C-175 Engine), 3514 (without Hydra-Shuttle Trans. with C-153 Engine, 8000 (Forklift with C-200 Engine). Measures 12 5/16 inch inside diameter and .485 inch width. (Item #: 116898, Ref: 396421R1) $61.00

Ring Gear, Flywheel - This Flywheel Ring Gear measures 12.332 Inch Inside Diameter, 13.560 Inch Outside Diameter, Has 134 Teeth and is .485 Inches wide. Fits International Tractors; 300 diesel, 330 diesel, 340 diesel, 350 diesel, 424 gas, 444, 460, (504 diesel serial number 13675 and earlier, gas serial number 29632 and earlier), 544 with Synchromesh Transmission, 606 gas, 656, 666, 686, 2424, 2444, 2544 with Synchromesh Transmission, 2606, 3514 engine serial number 29632 and earlier. Also fits Construction and Industrials; T340, 4000. Replaces 367042R1 (Item #: 121882, Ref: 367042R1) $61.00

Second Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388149R1, Teeth: 33, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496798) $204.01

Set Of Three Sungears - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, (Item #: 113409) $155.00

TA Clutch Carrier, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359895R3, For a new version of this item use Item #: 165256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441430) $45.01

Torque Amplifier Carrier - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces Case IH OEM number 359895R3, Teeth: 27, Flywheel Step: .900", (Item #: 165256) $167.00

Torque Amplifier Drive Shaft, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 360676R51, Splines: 10/ 14, Diameter: 1.128", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436810) $231.01

Valve, Exhaust - Exhaust valve, 4 required. For tractor models 474, 584, 585. (206 CID Diesel 4-cylinder engine. Cupped head piston) and models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 128731, Ref: 3055056R2) $10.98

Valve Guide - For tractor models 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 172721, Ref: 3055022R2) $3.98

Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70

Valve, Intake - Intake Valves sold each. Please verify the number of valves needed for your engine. Some engines require 3, 4 or 6 Intake Valves. For tractor models 474, 584, 585. (206 CID Diesel 4-cylinder engine. Cupped head piston) and Models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). (Item #: 128730, Ref: 3055055R2) $15.60

Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $57.00

Valve Seal - This is a positive type valve seal used on International Diesel Engines. Replaces 3218398R91, 3218399R1, 3228677R91 (Item #: 128633) $2.70

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 2544, 474, 544, 574, 584, 585, 664, 674, 684. Contains: springs, guides, locks, (no valves). (Item #: VSKH239) $258.67

Valve Spring, Diesel - VALVE SPRING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, (706, 756, 786, 826, 886, HYDRO 86 all with D310 Diesel). (Item #: 173505, Ref: 3055060R1) $7.70

Valve Train Kit - For International / Farmall tractor models 544, 574, 584, 585, 664, 674, 684, 784, 785 (diesel), 884, 885, 2500, 2500A, 2500B, Engine (s): D206, D239, D246, D268, Includes: Intake Valves, Exhaust Valves, Valve Guides, Valve Springs, Valve Keepers, (Item #: 120318) $291.00

Engine Pistons and Sleeves

Piston Pin Bushing - PIN BUSHING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 128516, Ref: 3132018R2) $6.10

No
Picture
Sleeve and Piston Kit - For tractor models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 3-7/8 inch standard bore. (Item #: PK239D) $645.26

Sleeve Orings, Pair - Used with D179 CID Engine on: 454, 464, 484. Used with D206 CID Engine 474, 584, 585. Used with D239 CID Engine on: 2544, 544, 574, 664, 674, 684, 685, 724, 824. Used with D310 CID Engine on 2706, 2756, HYDRO 86, 686, 706, 756. Used with D358 CID Engine on: 2826, (3088 below serial number 121247), (3288 below serial number 111090), 786, 826. Inside Diameter: 4.331 inch (110.00 MM). Thickness 0.197 inch (5.00 MM) Replaces 3228344R1, 3055021R2, 3218603R1. (Item #: 179427, Ref: SRK724) $2.98

Engine Rings

No
Picture
Piston Ring Set - .030" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .030” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, For - .030" Oversize - Single Piston Ring Set use Item #: 120863, (Item #: 174308) $154.00

Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .030” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .030" Oversize - 6 Cylinder Piston Ring Set use Item #: 120865, (Item #: 120863) $29.60

No
Picture
Piston Ring Set - .040" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .040” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, For .040" Oversize - Single Cylinder Piston Rings use Item #: 120864, (Item #: 174310) $236.00

Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .040” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .040" Oversize - 6 Cylinder Piston Ring Set use Item #: 120865, (Item #: 120864) $45.40

No
Picture
Piston Ring Set - .060" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .060” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, Piston Ring Set - .060" Oversize - Single Cylinder use Item #: 120865, (Item #: 174312) $139.00

Piston Ring Set - .060" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .060” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .060" Oversize - 6 Cylinder use Item #: 120864, (Item #: 120865) $26.70

No
Picture
Piston Ring Set, Single Cylinder - Piston Ring Set. Keystone top ring. For 2544, 544, 574, 664, 674, 684 all with 239 CID 4 cylinder diesel, standard bore 3 7/8 inches. Contains 1 x 1/8 inch, 1 x 3/32 inch, 1 x 3/16 inch. Replaces 30-3090264, 3139594R91, G907224, G-907-224, 674309C92, 303090264. (Item #: 108178, Ref: PRS239D) $34.00

Piston Ring Set - Standard - 4 Cylinder - For International / Farmall tractor models 544, 574, Bore: 3.875", Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 128912) $181.00

No
Picture
Piston Ring Set - Standard - 4 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, Bore: 3.8125", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold 4 Cylinder set, For Piston Ring Set - Standard - Single Cylinder use Item #: 120866, (Item #: 174306) $103.00

Exhaust System

Exhaust Manifold - For International / Farmall tractor models 544, 553, 644, 654, 664, 724, 744, 824, 844, 2544, Replaces International OEM number 3058003R1, 3058003R11, 3058003R12, For D239 Engine, 2 Bolt Flange, (Item #: 111519) $77.98

Exhaust Pipe - For tractor models 2544, 2656, 460, 544, 560, 656, 660. (Item #: 126744, Ref: 369613R1) $31.20

$Farmall 544 Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome$
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Style: Curved, Inlet I.D.: 2-3/8", O.D.Pipe: 2-1/2", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115481) $165.88

$Farmall 544 Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome$
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number A29991, Style: Curved, Inlet I.D.: 2-3/8", O.D. Pipe: 4", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115486) $209.00

$Farmall 544 Exhaust Stack - 2-3\8 inch X 36 inch, Straight Chrome$
Exhaust Stack - 2-3/8" X 36", Straight Chrome - For International / Farmall tractor models Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number 62476D, Style: Straight, Inlet I.D.: 2-3/8", O.D. Pipe: 3", Length: 36", Chrome Plated, Eliminates Muffler, (Item #: 115487) $134.11

Manifold - Intake/exhaust manifold. For tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500 with C157, C175, C200 engines with gas updraft. Replaces 398071R1. Exhaust goes up, off-center, not on the end. Uses R0301G gasket set, not included. (Item #: 101557, Ref: 406046R1) $173.00

Muffler - Vertical muffler for gas and diesel tractor, fits engines C200, 221, C263, D166, D188, D236, D239, D282. Inlet inside diameter 1-7/8 inch, outlet outside diameter 1-7/8 inch length 22-1/2 inches, diameter 4-1/2 inches, round body. For tractor models 544, 2544, 460, 606, 2606, 560, 656, 660, 2656, 340 For 2504, 2544, 2606, 2656, 340, 460, 504, 544, 560, 606, 656, 660, 664. (Item #: 100806, Ref: 371039R91) $59.00

$Farmall 544 Muffler Eliminator - 2-3\8 inch X 24 inch, Straight Chrome$
Muffler Eliminator - 2-3/8" X 24", Straight Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Inlet I.D: 2-3/8", O.D. Pipe: 3", Length: 24", Straight Pipe, Chrome Plated, Eliminates Muffler, (Item #: 115491) $81.17

Muffler - Restoration Quality - For International / Farmall tractor models 340, 460, 504, 544, 560, 606, 656, 660, 2606, 2656, Replaces International OEM number 370644R91, 370773R91, 403551R1, High Temperature Paint, IH logo and part number stamped to muffler, Inlet Length: 2.063", Inlet ID:2.400", Inlet OD: 2.540", Shell Length: 12", Shell Diameter: 6", Outlet Length: 13", Outlet OD: 2-1/2', Overall Length: 27-1/2", (Item #: 164540) $88.00

Muffler, Vertical - Round body 5-1/2 inch shell diameter, A= 2-1/2 inch inlet length, B= 2-3/8 inch inlet inside diameter, C= 14-1/2 inch shell length, D= 11-3/4 inch outlet length, E= 2-1/2 inch outlet outside diameter, F= 29 inches overall length. For model 544 Farmall with C200 gas or D239 diesel engine. (Item #: 100815, Ref: 370664R1) $51.00

Stainless Steel Muffler - Show Quality - For International / Farmall tractor models 340, 460, 504, 544, 560, 606, 656, 660, 2606, 2656, Replaces International OEM number 370644R91, 370773R91, 403550R1, Polished Stainless Steel, Inlet Length: 2.063", Inlet ID: 2.400", Inlet OD: 2.540", Shell Length: 12", Shell Diameter: 6', Outlet Length: 13", Outlet OD: 2-1/2", Overall Length: 27-1/2', (Item #: 164541) $197.87

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: M, MD, WR9S, Super WD9, 400, 450, W400, W450, 460, 504, 544 diesel, 455 diesel, 2544 diesel, 5606, Gas powered combines: 403 and 453 Hillside, 503, 615, 715. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Item #: 157279, Ref: R28794) $8.20

Air Cleaner Hose - For International / Farmall tractor models 454, 544, 574, 606, 656, 674, 706, 756, 766, 806, 826, 856, Compatible with International Construction and industrial models 2400, 2500, Replaces International OEM number 382400R1, A: 2.25", B: 2.50", (Item #: 163507) $13.50

Cable - Choke - For International / Farmall tractor models 460, 544, 606, 2544, 2606, Replaces International OEM number 369689R93, Length: 48-1/2", (Item #: 161898) $26.70

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Farmall / International it fits: [ 2404, 2424, 2444, 2504, 2544, 2656, 330, 340, 404, 424, 444, 454, 464, 504, 544, 574, 656, 666, 674, 686 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ], [ 2826, 664, 826 (For diesel fuel shut off cable bracket) ], [ Industrial: 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3514, 4500A, 4500B, 8000 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ]; Replaces: 373373R1, 29-81, B110-10 (Item #: 126116, Ref: CT29-81) $5.10

$Farmall 544 Cable - Fuel Stop \ Shutoff$
Cable - Fuel Stop / Shutoff - For International / Farmall tractor models 544 (diesel, s/n 14272-earlier), 664 (diesel), 2544 (diesel, s/n 14272-earlier), Replaces International OEM number 530762R2, Length: 47-1/2", (Item #: 161930) $29.60

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carbs used on: 464, 504, 544, 656, 574, 666, replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, 934SL, 974SL, TSX984SL. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA, 1 year warranty. (Item #: 100752, Ref: 14996) $475.00

Carburetor - With reversible linkage. This Zenith Style Carburetor outperforms the original carbs. Replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, TSX934SL, TSX974SL, TSX984SL. International part numbers 381945R93, 396737R93, 396738R92, 396966R91, 398069R91, 398069R92, 399355R93, 400348R91, 401379R91, 404731R91, 405530R91, 405869R94, 535134R91, 535135R91 Center to center on the 2 mounting bolts is 2 11/16 inches. 1 year warranty. (Item #: 183805, Ref: 14996B) $300.00

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carburetors used on: F504. Replaces 377234R94. For 101, 303 replaces 383128R91 and 12758. For I544 replaces 405030R91. For F666 used on C-291 engine, replaces 65486C93. Also replaces numbers 405530R91, 534475R92, 67836JC92, 678478C91, 65486C93. Also replaces Zenith number 12758. New Zenith Carburetor with 2 11/16 inch center-to-center on 2 mounting bolts. Made in USA. 1 year warranty. (Item #: 100765, Ref: 12994) $504.00

Carburetor Float - For tractor models 105, 203, 210, 230, 2500A, 2500B, 275, 375, 454, 464, 504, 544, 574, 656, 666, 686, HYDRO 70, HYDRO 86, ALL WITH MARVEL-SCHEBLER LARGE BOWL CARBURETORS. 381962R1 (Item #: 105095, Ref: R2383) $20.00

Carburetor Kit, Basic - Kit for Zenith 12758, 12685, 13384, 13396, 13588, 13716 carbs on 2504, 2544, 3514, 504, 544, 574, 666, 674, 686. (Item #: 100741, Ref: Z104) $24.20

Carburetor Kit, Basic - Kit for Marvel TSX934, TSX959, TSX857, TSX927, TSX974, TSX975 carbs used on 2544, 3514, 504, 544, 574, 656, 666, 674, 686. (Item #: 100734, Ref: MS102) $15.70

Carburetor Kit, Basic - Kit for IHC 406804R91, 361525R92, 363741R93, 367258R92, 380956R96, 381984R95, 386424R96, 388297R94, 372723R92, 379813R95, 396197R93, 539575R91, 388425R96, 533622R91, 358065R91, 358554R91, 356948R92, 357231R92 carbs on 2544, 300, 350, 460, 544, 560, 656, 660, 706, 756, 766, 806, Super H, Super M, Super W-4. (Item #: 100731, Ref: IH103) $15.60

Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is used on International carburetors 388296R92, 388297R94, 406803R91 (Must Reuse Fuel Inlet Fitting), 406804R91 (Must Reuse Fuel Inlet Fitting). The kit contains all the parts shown. (Item #: 185012, Ref: R7869) $78.00

Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is for Marvel-Schebler carburetor number TSX934. The kit contains all the parts shown. (Item #: 185007, Ref: R7891) $63.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX857, TSX484, TSX596, TSX925, TSX934, TSX959, TSX968, TSX980, TSX985. For the following tractor models: 504, 454, 544, 574, 674, 2400A, 2500A, 2500B. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203319, Ref: 1434-CARB) $390.01

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 13384, 405030R91. For the following tractor models: 464, 544. Add $150.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203324, Ref: 1440-CARB) $793.01

No
Picture
Complete Carburetor Kit - For International / Farmall tractor models 544, 656, 2544, For International Carburetor number 388296R92, 388297R94, 406803R91, 406804R91, Kit includes: basic carburetor kit, fuel and air adjustment screws, jets, and gaskets, (Item #: 178513) $56.00

$Farmall 544 Fuel Filter \ Spin On$
Fuel Filter / Spin On - For tractor models 385, 454, 484, 544, 574, 664, 674, 684, 685XL, 686, 706, 756, 785, 786, 826, 884, Hydro 86, 2400, 2500, 3088, 3288. (Item #: 125844, Ref: 3132428R2) $18.50

Fuel Injector Nozzle Sleeve - This Fuel Injector Nozzle Sleeve is used on D155, D179, D206, D239, D246, D268, DT268, D310, and D358 Engines. Brass Construction, 3.190 inch overall length 0.386 inch injector tip inside diameter. Replaces 73055344, 3055344R1 (Item #: 165847, Ref: 3055344R1) $32.20

No
Picture
Fuel Injector, Remanufactured, 7735253R - For International / Farmall tractor models 464, 484, 485, 544, 574, 664, 674, 684, 685, 826, 2400A, 2826, Compatible with International Engine (s) D179, D239, D358, Replaces International OEM number 7735253R, 3055423, 3218251, 735253C91, Bosch KBL Ear (Y Shape) Body Style, (Item #: 211208) $125.01

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be cork or rubber depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20

Fuel Sending Unit - With Seal. For GAS tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. NOT COMPATIBLE WITH ETHANOL BLENDS. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94) $45.00

Fuel Sending Unit - For International / Farmall tractor models 504, 544, 606, 644, 656, 2504, 2544, 2606, 2656, Replaces International OEM number 377103R91, 377104R91, (Item #: 115678) $60.00

Fuel Solenoid - For International / Farmall tractor models Hydro 70, Hydro 86, 350, 444, 454, 464, 504, 544, 574, 666, 674, 686, 2400A, 2504, 2544, Compatible with International Construction and industrial models 2400A, 2504, 3400A, 3500A, 3514, Compatible with International Engine (s) C153, C175, C200, C291, Replaces International OEM number 386015R91, 396739R91, 396739R92, 396739R93, 530184R1, 71358C2, 71358C91, 71358C92., For Marvel Schebler carburetors only, not for International carburetors, (Item #: 111797) $175.00

Injector Nozzle - For tractor models 454, (464 up to serial number 027205 with nozzle number DLLA150S417), 544, 560, 574, 656, 660, 664, 674, 706, 786, 826, (886 serial number 14472 and up), 2544, 2656, 2706, 2826. (Item #: 179950, Ref: 3055428R92) $39.20

Insulating Fuel Tank Pad - For International / Farmall tractor models Hydro 70, Hydro 86, M (s/n FBK24215-later, Gas), MD (s/n FBK24215-later, Gas), Super H (Gas), Super HV (Gas), Super M (Gas), Super MTA (Gas), 240 (Farmall s/n 501-2293, IH s/n 501-6137), 300 (Gas), 330, 340 (Farmall s/n 501-3449, IH s/n 501-3024), 350 (Gas), 404 (Gas), 424 (Gas and Diesel), 444 (Gas and Diesel), 544 (Gas and Diesel), 606 (Gas and Diesel), 666, 686, 706 (Gas and Diesel), 756 (Gas and Diesel), 766 (Gas and Diesel), 826 (Gas and Diesel), Compatible with International Construction and industrial models 2404 (Gas), 2424 (Gas and Diesel), 2444 (Gas and Diesel), 2504 (Gas and Diesel), Replaces Case IH OEM number 60671D, (Item #: 163917) $3.10

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: 424 (late), 444 (late), 454, 504 (late), 544, 574, 656, 666, 674, 686. Replaces 392096R91. (Item #: 179751, Ref: C3NN9D532A) $6.50

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50

No
Picture
Throttle Friction Disc - This Throttle Friction Disc measures 0.165 of an inch thick, 1.960 inches outside diameter and has a center hole of 0.530 of an inch diameter. For models 240, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, 274, 284, 340, 3444, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884 and Hydro 84. Also replaces 388632R1, 394716R1 and 399168R1. (Item #: 178163, Ref: 369463R1) $7.40

Throttle Knob - For tractor models 384, 454, 464, 544, 574, 656, 664, 666, 674, 686, 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 2400, 2500, 2544, 2656, 2756, 2826, 2856, 3110, 4366, (4386, 4568, 4786 4WD), Hydro 70, Hydro 86, Hydro 100. (Item #: 111041, Ref: 397931R2) $6.80

Gaskets

Fuel and Temperature Combo Gauge - Gauge combination DOES NOT HAVE IH Logo. Used on models (706, 806, 1206, 826 diesel), 544, 656, (756 diesel), 664, (666 diesel), 4166, (686 diesel), 4186, Hydro 70, Hydro 86, Ind. (2706, 2806, 21206, 2826 diesel), 2544, (2656, 2756 diesel). SPADE terminals. Uses a 5/8 inch x 24 thread probe, Replaces 1546480C1, 396380R91, 539293R1, 382733R93, 396380R91, 397939R92, 1546480C1 (Item #: 108043, Ref: 396380R91) $107.00

Gauges

Cable - Tachometer, 400727R91 - For International / Farmall tractor models 544 (Hydro), 656, 2544 (Hydro), 2656, Replaces Case IH OEM number 400727R91, Length: 42", (Item #: 161988) $35.70

Fuel Gauge - For tractor models 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100.The 12 Volt Negative Ground fuel gauge is calibrated properly for 460, 560, and 660 with a Stewart Warner sending unit, but this fuel gauge has a different appearance. Gauge must be grounded to work properly. You will need to run an extra ground wire from the threaded clamp terminal to an existing bolt to attain a proper ground. 32-244 Ohm. Use with 378427R91 sending Unit. Replaces 533992R1 H142794. (Item #: 121190, Ref: 533992R1) $40.60

No
Picture
Fuel Gauge with Sending Unit - For International / Farmall tractor models Hydro 100, 460, 544, 560, 656, 660, 706, 756, 766, 806, 826, 856, 966, 1026, 1055, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4568, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 5378427R1, 533992R1, 378427R92, 378427R93, 378427R94, 378426R91, For replacement sending unit use Item #: 121190, (Item #: 135041) $77.00

Fuel Sending Unit - This fuel sending unit includes a seal. For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. Compatible with Ethanol blend to 15%. 32-244 Ohm. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94EB) $45.00

Fuel Sending Unit - This Sending unit operates from 32 Ohm full to 244 Ohm empty. It will not work work with 0-70 Ohm fuel gauges. It is for 12 volt systems. Use with Stewart Warner Fuel Gauges like 533992R1. Replaces: 378427R91, 84203050 (Item #: 107954, Ref: 378427R91) $45.00

Speedometer Cable - This Speedometer / Tachometer cable is used on Hydro 70, Hydro 86, 544, 656, 666, 354, 434, 364 tractors. It measures 45-1/8 inches long. Both ends have 5/8 - 18 fittings. Replaces 3068984R91, 3068984R92, 398955R91, 398955R92, 398955R93 (Item #: 122467, Ref: 3068984R91) $38.20

Tachometer - Tachometer assembly complete. Tractors: following tractors with HYDRO TRANSMISSION: 544, 656, 666, 826, 966, 1026, 1066, Hydro 70, Hydro 86, Hydro 100 (Gas/Diesel). Replaces 398957R1, 402033R1, 65324C1. (Item #: 121657, Ref: 534055R1) $215.00

Tachometer - For tractor models (656 Rowcrop with gear drive and T.A gas or diesel), will work for 544. Singel light hole in rear. Replaces 389973R91, 401841R91. (Item #: 121656, Ref: 103153A1) $168.00

No
Picture
Tachometer Cable - Overall Length 57.5 inches. For tractor Models: 2500A gas, 2706 gas, 2756 gas, 2806 gas, 2826 gas hydro, 2856 gas, Hydro 70 gas, Hydro 86 gas, 385 diesel, 484 diesel, 485 diesel, 544 gas, 573 diesel, 584 diesel, 585 diesel, 656 gas and diesel, 666 gas, 674 diesel, 684 diesel, 685 diesel, 686 gas, 706 gas, 756 gas, 766 gas, 784 diesel, 785 diesel, 806 gas, 826 gas hydro, 844 diesel, 856 gas, 885 diesel. (Item #: 111325, Ref: 1970820C1) $27.74

No
Picture
Tachometer Cable - This tachometer cable is 58 3/8 inches long for models: Hydro 84, 3514 with C175 gas, (385, 484, 485, 584, 684, 784, 785, 884 all without cab), (666, 686, 706, 756, 766 806, 826, 856 all with gas), 544 rowcrop with gas, 656 gas or diesel, (hydros 2400, 2500, 454, 464, 574, (585, 685, 885 without cab. Replaces 393326R92, 529234R1. (Item #: 111325, Ref: 384843R91) $27.74

Tachometer Drive Gear Assembly - This Tachometer Drive Gear Assembly has 13 Teeth and is 1.765 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368245R12, 368245R11, 178575H1 (Item #: 164574, Ref: 368245R11) $64.58

Tachometer Drive Housing Fitting - This Tachometer Drive Housing Fitting is 3/4 inch - 20 pipe thread to 7/8 inch - 18 thread, 1.407 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368246R1, 178309H1 (Item #: 164575, Ref: 368246R1) $24.85

Hitch / Drawbar

3 Point Conversion Kit - For M, MTA, Super M, Super MTA, MD, 400, 450, 460, 504, and 560 also for 544 and 656 with spacer #861188. Two hydraulic cylinders included. (Order optional bracket #861190 to use swinging drawbar) Cat. I/II Weight is 260Lbs. Note: HK-11062 is similar to the picture shown but has two cylinder locations. (Item #: 111430, Ref: HK11062) $956.00

Center Link Handle - Used on International Models: 21026, 21206, 2606, 2706, 2806, HYDRO 100, HYDRO 70, HYDRO 86, 100, 1026, 1066, 1206, 1256, 130, 140, 1466, 1468, 1566, 1568, 2504, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 844S, 856, 966. This part replaces 392204R1 (Item #: 164316, Ref: 392204R1) $23.90

Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Item #: 108883, Ref: 523861R2) $9.40

Drawbar Brace Rod - For International / Farmall tractor models H (s/n 36680-later), M (s/n 21091-later), Super H, Super M, 300, 340, 350, 400, 450, 460, 544, 656, 664, 666, Replaces International OEM number 57233DA, Forged, 17-1/4" C.C. hole, (Item #: 126337) $65.00

Drawbar, Front Tube - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, Replaces International OEM number 389100R11, Tube length: 25.50", (Item #: 170028) $258.00

Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 3.437 inches long with a 1.125 inch diameter. In some applications it is used with 49139D lock plate, sold separately. Used on H serial number 39937 and above, Hydro 70, Hydro 86, Super H, 300, 350, 404, 504, 544, 606, 656, 664, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. Replaces international part number 57654D (Item #: 112537, Ref: 57654D) $15.80

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50

Drawbar Support Casting - Used on tractors with Three Point Hitches, this part measures 1 inch X 3-1/2 inches X 16.00 inches. It is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. Replaces 389360R1. (Item #: 108818, Ref: 389360R1) $402.00

Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $114.00

Duckhead Pivot Assembly - Duckhead Pivot Assembly, 1 inch Screw Includes: duckhead, collar w/ set screws, hardened washer and weld on washer. Fits 1 inch Shaft. Contains 1 - 383990R2, 2 - HD78CUP, and 1 Set screw. (Item #: 122667, Ref: 223315) $69.00

No
Picture
Fasthitch to 3-point Prongs with Cat 2 Balls - For International / Farmall tractor models C, Super C, 200, 230, 544, 606, 656, 706, 756, 806, 826, 856, Set of 2, Category 2 (straight style arm with balls), Additional Handling and Oversize Fees Apply To This Item, (Item #: 114596) $162.00

No
Picture
Fasthitch to 3-Point Quick-Attach Assembly - For International / Farmall tractor models C, Super C, 200, 230, 544, 606, 656, 706, 756, 806, 826, 856, Category 2 Straight arm style, This is a one piece assembly with a U style toplink bracket attached to the arms, Top link not included, For Toplink use Item #: 103163, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 111431) $314.30

Front Stabilizer Eyebolt - Used with 382386R2 stabilizer control arm, this Eyebolt is used on International models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026. Replaces International OEM number 382390R1 (Item #: 108857, Ref: 382390R1) $32.90

Inner Pipe - Associate parts for this Inner Pipe are 384852R1 Pin, 389369R1 Yoke, 389370R11, Lockout pin, 400836R1 Clevis. It is used on International models Hydro 70, Hydro 86, 544 (1/1966 - 12/1973), 656 (1/1966 - 12/1973), 664 (1/1972 - 1/1973), 666 (1/1972 - 1/1973), 686 (1/1969 - 12/1971), 2544 (Diesel), 2656 (1/1963 - 12/1971). Replaces 400835R1 (Item #: 108821, Ref: 400835R1) $64.00

Lateral Limiter Clevis - Used in association with 384852R1 Pin, 389369R1 Yoke, 389370R11 Lockout pin and 400835R1 Inner pipe, this Three Point Lateral Limiter Clevis measures 7.310 inches long. It is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108851, Ref: 400836R1) $173.00

Leveling Assembly Kit - Consisting of one each of the following, 523861R2 handle, 223315 duckhead, 389542R11 screw, 538970 (housing 16.750 inches long), this kit is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. (Item #: 128562, Ref: 223306) $211.00

Leveling Screw Assembly - Measuring 25.500 inches this leveling screw has a 1.000 inch diameter and 6 inches of threads. It is used with 223315 - Duckhead Pivot Assembly, 523861R2 - Crank Handle and 538970R1 Leveling Screw Housing (each sold individually). Used on Hydro 70, Hydro 86, 544, 656, 666, 686. (Item #: 108836, Ref: 389542R1) $43.30

Leveling Screw Housing - Used on both 2 point and three point hitches, this part is used with 389542R11 Screw. It is 16.750 inches long and threaded for a 1 inch screw. Replaces 538970R1, 389538R1. Used on Hydro 70, 544, 656, 664, 666, 686. (Item #: 108815, Ref: 538970R1) $68.00

Lift Arm Latch - This Lift Arm Latch is used on 2504 Indust/Const, 2544 Indust/Const, 2606 Indust/Const, 2656 Indust/Const, 504, 544, 606, 656, 664, 666, 686, Hydro 70, Hydro 86. It replaces 380993R2, 380993R1 (Item #: 111394, Ref: 380993R2) $34.20

Lower 3 Point Latch Spring - Four of these are used per tractor. Sold individually. This part Measures 0.075 inches thick, 5.896 inches length, 0.325 inch hole diameter and tapers 0.200 to 0.755 inches width. This part ships bare metal. Replaces 380992R1, 392882R1 (Item #: 155918, Ref: 392882R1) $14.10

Lower Pull Arm Pin - Used on International models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, this part replaces 406685R1 (Item #: 112530, Ref: 406685R1) $19.40

No
Picture
Lower Pull Arm Pin, Used - For International tractor models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, Replaces International OEM number 406685R1, Front Pin, For a new version of this item use Item #: 112530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435596) $11.01

Pin, Front Drawbar - 1" pin diameter, 2.50" usable length, 3.120" overall length, 1.50" head dia. For tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, (4100, 4156, 4166, 4186 thid id drawbar support arm pin for these models), 2544, 2656. (Item #: 170296, Ref: 439-51644) $4.98

No
Picture
Rear Drawbar Support, Used - For International tractor models 544, 656, 666, 2544, 2656, Replaces International OEM nos 391101R1, For Fast Hitch Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496573) $204.01

Stabilizer Control Arm - International Tractors Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 all use this Stabilizer Control Arm on Three Point Hitches. (Item #: 127417, Ref: 389362R1) $226.00

Stabilizer Control Arm, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389362R1, For a new version of this item use Item #: 127417, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 427417) $134.01

Stabilizer Eyebolt, Rear - Used on Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, this Eyebolt replaces International part number 389371R1. (Item #: 152201, Ref: 389371R1) $33.80

Stub Drawbar - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686 this drawbar measures 26-1/4 inches long, 2-1/2 inches wide and 1-1/2 inches thick. It has 1.040 inch diameter holes at 6.390 inches and 8.390 inches from the front. Replaces 389099R1 (Item #: 110316, Ref: 389099R1) $144.00

Sway Limiter Lockout Pin - Part number 389370R11, Sway Lockout Pin, is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108853, Ref: 389370R11) $8.50

Sway Limiter Yoke Pin - Used on both the forward and rear yokes, this pin measures B - .621 inches in diameter, and A - 2.05 inches long. Used on Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 1026, 2544, 2656, 3088, 3288, 3488, 3688. This pin replaces part number 384852R1 (Item #: 108854, Ref: 384852R1) $3.60

Swinging Drawbar - For International / Farmall tractor models 504, 544, 606, Compatible with International Construction and industrial models 2504, Replaces International OEM number 375986R1, Length: 48.38", Thickness: 1.250", Width: 2.250", (Item #: 167318) $198.00

Three Point Hitch - This 3-point hitch kit fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar. Kit includes (Cat # 1 on tractor end and Cat # 2 on equipment end, and 2 hydraulic 2 way cylinders, but does not include hoses. Please note, this hitch exceeds size limitations for UPS. This hitch kit must ship via LTL freight truck. (Item #: 1000051, Ref: IHS3009) $1799.99

Three Point Lateral Limiter Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389369R1, (Item #: 108852) $28.98

Top Link Bracket - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686, this new Top Link Bracket replaces part number 389372R41 (Item #: 109483, Ref: 389372R41) $167.00

Hydraulic System

Action Control Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 686, 2544, 2656, Replaces International OEM nos 389589R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430805) $176.01

Draft Control Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 686, 2544, 2656, Replaces International OEM nos 389583R95, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430806) $291.01

No
Picture
Hitch Hydraulic - PUMP - 12 GPM For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 104233, Ref: R2965) $330.00

Hydraulic Filter - Hydraulic oil filter, for gear drive tractors with pumps up to 12 gpm. Not for hi-capacity power supply. For tractors: 340, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. (Item #: 111116, Ref: 388084R93) $36.90

Hydraulic Pump - Hydraulic Pump, 12 GPM Main Hitch Pump. Note: Pump pressure is rated at 2250 PSI, exceeding pressure may damage pump and void the warranty. Open back type, can be used with piggy-back pump. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Replaces 1949296C1, 70933C91, 373964R93. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 104233, Ref: 70933C91) $330.00

Hydraulic Pump - Pump is open back type to use with piggy-back pump, 17 GPM rating, max PSI of 2250. Not for use in 12 GPM systems. If system is 12 GPM, use 1949296C1. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Hydraulic Pump is 17 GPM. (Item #: 104237, Ref: 70935C91) $390.00

Hydraulic Pump Backplate Gasket - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 450, 460, 504, 544, 560, 606, 656, 660, 706, 786, 806, 826, 856, 886, 986, 1026, 1066, 1086, 1206, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21256, 21456, Replaces International OEM number 71265C1, 371543R1, 371543R2, For Pumps 70631C91, 70932C91, 70933C91, 70935C91, (Item #: 111636) $4.40

Hydraulic Pump Back Plate with Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 330, 340, 460, 504, 544, 560, 606, 656, 660, 756, 766, 786, 806, 826, 856, 886, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Compatible with International Construction and industrial models 2504, 21206, 21256, 21456, Replaces International OEM number 371524R1, 71265C1, (Item #: 122682) $18.90

Hydraulic Pump, Hitch - PUMP - 17 GPM For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826 (Item #: 104237, Ref: R2966) $390.00

Hydraulic Pump, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 460, 504, 544, 560 (application), 606, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, 1026, 1456, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3488, 21026, 21456, Replaces International OEM number 70935C91, 373966R94, 1949292C1, 527755R91, For 560 application, pump must be open on back side to accomodate piggyback pump., 17 GPM, For a new version of this item use Item #: 104237, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404237) $206.01

Knob, Hydraulic Position Control - For tractor models 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. (Item #: 166950, Ref: 382801R1) $11.70

Knob, Hydraulic Sensitivity Control - For tractor models 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. (Item #: 128572, Ref: 382805R1) $8.00

Remote Coupler, Remanufactured, 536761R91 - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 100, Hydro 186, 544, 606, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Replaces International OEM number 536761R91, 544786R3, 544786R91, 544786R92, 544786R94, 544786R95, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 207002) $825.01

Remote Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 404, 504, 544, 606 (s/n 6754-later), 656, 664, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, 2404, 2504, 2544, 2606 (s/n 6754-later), 2656, 2706, 2756, 2806, 2826, 2856, 4100, 21206, 21256, Replaces International OEM nos 390826R94, 390826R91, 390826R92, 390826R93, Open on 1 side only, 1500 psi to 2000 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496748) $450.01

Seal, Countershaft Driven Hydraulic Pump - This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $14.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.10

Light Switch, 12 Volt, 4 Position - For tractor models 1026, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1066, 1456, 1466, 1468, 1566, 1568, 4166, 4186, 4366, 4386, Hydro 70, Hydro 86, Hydro 100. (Item #: 111900, Ref: 403571R1) $40.00

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.00

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $14.70

Miscellaneous

Flex Plate, Remanufactured, 404043R94 - For International / Farmall tractor models 544, 656, 2544, 2656, Replaces International OEM number 404043R94, Plate Diameter - 11", Hub Diameter 1-3/16", Splines - 11, Center - Solid, (Item #: 204318) $104.01

Flex Plate, Remanufactured, 532249R91 - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 2544, 2656, Replaces International OEM number 532249R91, Plate Diameter - 11", Hub Diameter 1-3/16", Splines - 11, Center - Spring, (Item #: 204319) $81.44

Gear Shift Knob, Rubber - For International / Farmall tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 388182R1, SHAFT 0.840" HOLE, BASE 1.900" HOLE, 2 1/4" TALL, (Item #: 124171) $12.60

Gear Shift Shaft - For International / Farmall tractor models 544 (s/n 14519-later), 656 (s/n 45579-later), 666, Replaces International OEM number 534120R91, Length: 14.500", Pin Diameter: 1.125" Across Pins, Pin Size: .312" (square), Shaft Diameter: .750", (Item #: 163526) $126.00

Hydraulic Pump Drive Gear, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 660, 2544, 2656, Replaces International OEM nos 396859R1, Teeth: 25, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430889) $117.01

Hydraulic Valve, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1026, 1066, 1456, 2544, 2656, 2756, 2826, 2856, 4156, 4166, 4186, 4366, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 383267R94, 529910R93, 383267R91, 383267R92, 383267R93, 529910R91, 529912R91, 529912R92, 529910R92, Opened on both sides, Open Center Hydraulic Sysyem, For a Remanufactured version of this part use Item #: 206999, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498240) $555.01

O-Ring, Hydraulic - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2756, 2806, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21256, Replaces International OEM number 346959R1, 511524, (Item #: 153568) $0.50

O-Ring, Hydraulic Power Steering - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 460, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 254688R1, 14472780, (Item #: 153567) $0.90

Torque Amplifier Carrier, Remanufactured, 361281R13 - For International / Farmall tractor models Super MTA, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, For a New version of this sku use Item #: 151955, (Item #: 204411) $166.91

No
Picture
Transmission Shift Actuating Link - For International / Farmall tractor models Hydro 70 (1/74-12/77), Hydro 86 (1/74-12/77), 544 (1/66-12/73), 656 (1/66-12/73), 664 (Diesel, 1/72-12/73), 666 (1/72-12/72), 686 (1/69-12/72), 2544 (Diesel), 2656 (1/63-12/71), Replaces International OEM number 388201R11, (Item #: 173872) $87.00

Oil System

Oil Filter Spin On - Oil filter element, spin-on type. Approc, diameter 5.37 inch height, 3.68 inch outside diameter. For gas engines: C157, C175, C200, C291. For diesel engines: D179, D209, D236, D239, D246, D310, D358. For 2544, 2706, 2756, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 826, 886, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 124840, Ref: 3136046R93) $10.10

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60

Oil Pump - For tractor models 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 2544, 3400A, 3500A, 3514, 4500, 454, 464, 544, 574, 674 For C157, C175 and C200 Gas Engines. Replaces 398073R93 (Item #: 128684, Ref: 601-1129) $356.00

Oil Pump - International D239, D310, D358 Diesel Oil Pump (Item #: 179998, Ref: 3136434R91) $406.00

PTO / Driveline

Anti Creep Brake Piston - This Anti Creep Piston is used in multiple International models. Three are used per tractor. Sold individually. (Item #: 113402, Ref: 381464R22) $15.70

No
Picture
IPTO Drive Shaft Bearing Cage, Used - For International tractor models 504 (Gas and Diesel), 544, 656, 664, 666, 686, 2504, 2544, 2656, Replaces International OEM nos 388674R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441548) $176.01

IPTO Front Drive Shaft, Used - For International tractor models 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 389535R11, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441425) $135.01

PTO Assembly, Remanufactured, 389119R92 - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, Replaces International OEM number 389119R92, Single Speed Unit, 540RPM, (Item #: 204429) $950.01

PTO Bearing - This bearing measures 1.575 inches (40.005 mm) inside diameter, 3.150 inches (80.010 mm) outside diameter, and 0.709 inches (18.008 mm) wide. It replaces D83012, B18215, DANA070HD100, H437897, H4628S, H4625S, H4626S, H4627S, K3660223431, L33908, SBA326040030, P39642, ST215, 0000140211, 0040040, 1103566C91, 114085, 130029H1, 151901206, 190001311024, 190003311024, 190003313025, 192310210025, 1963034C1, 199012290707, 20915780, 2359180, 2521A415, 294714R91, 301164, 3146251R91, 325046C91, 339818X1, 340401140, 41618500, 47109308, 47110555, 47123219, S69425, 6208, 700524R91, 700526R91, 70066742, 700803429, 704772R91, 704772R92, 707805203, 713564R91, 80114085, 80301164, 81878507, 83962320, 87605894, 920096050, 9964942 (Item #: 111675, Ref: ST215) $32.98

PTO Control Boot - For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 118607, Ref: 393071R2) $4.70

PTO Coupler, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, Super M, Super MTA, 300, 300U, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2504, 2544, 2606, 2656, 3388 (s/n 10384-earlier), Replaces International OEM nos 360168R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430248) $49.51

PTo Disc - This PTO Clutch Disc has an inside diameter of 4 inches (102mm) with 51 teeth, outside diameter of 5 5/16 inches (135mm) Replaces 381490, 381490R4, 111357, 1277392C1, 1712-4422, 17124422, 1997688C1, 381490, 381490R3, 381490R4 (Item #: 111357, Ref: 381490R1) $5.60

PTO Drive Shaft - 51 and 12 teeth. For tractor models 1026, 1066, (1086 serial number up to 47999), 1206, 1256, 1456, (1486 serial number up to 25999), 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, (3388 serial number up to 10384), 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, (886 serial number up to 16999), 966, (986 serial number up to 23999), Hydro 100, (Hydro 186 serial number up to 11999), Hydro 70, Hydro 86. (Item #: 166964, Ref: 389529R1) $563.00

PTO Input Shaft, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3388, 21026, 21206, 21256, 21456, Replaces International OEM nos 389529R1, Spline: 12 and 51, Uses #91 Woodruff Key 1/4" X 3/4", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497525) $275.01

PTO Knob - For tractor models 544, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 112393, Ref: 387885R1) $9.40

PTO Plate - Measures 4.070 inches inside diameter, 5.300 inches outside diameter. Replaces 381489R3, 1277392C1, 1997688C1 (Item #: 111358, Ref: 381489R3) $4.30

PTO Seal - Measures 1.306 inch inside diameter, 2.220 inch outside diameter. THIS SEAL IS .312 InchES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. For tractor models Super A, H after serial number 118000, (M, MD, Super M, Super MTA and Super MD after serial number 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the following models with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91, 50702D, 372394R91, S90957, 708107R91. (Item #: 114730, Ref: 45702D) $9.80

No
Picture
PTO Shaft - 16 spline, 22 teeth, 1 11/16 inch diameter. For Farmall 504 (from serial number 14952), International 504 (from serial number 17590), 544 with 540 RPM, 664 with 540 RPM. (Item #: 151972, Ref: R2982) $205.00

PTO Shaft Oil Seal - This seal fits the following tractor models as a PTO shaft oil seal: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Hydro 186, Hydro 70, and Hydro 86. Replaces part numbers: 213712, 381480R1, 381480R91, 534917R91, 634036, and 80634036. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. (Item #: 109957, Ref: 8N7052A) $8.40

No
Picture
PTO Shaft Seal Kit - This PTO Shaft Seal Kit includes bearings, seals and O-rings. For tractor models: 2606, 2656, 460, 544, 606, 656, 664, 666, 686. All with Torque Amplifier. (Item #: 180732, Ref: R2990) $79.00

Seats

Lower Back Seat Bracket Set, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 574, 606 (With Vertical Action), 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (With Vertical Action), 1206, 1256, 1456, 1466 (With Vertical Action), 1468 (With Vertical Action), 1566, 1568, 1586, 2656, 2706 (s/n 3000-later), 2756, 2806, 2826, 2856, 4156, 4166, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 715, 815, 915, Compatible with International Hay Cutting(s) 375, Compatible with International Rake / Tedder(s) 100, Replaces International OEM number 387172R1, 387173R1, Includes 2 Brackets, For a new version of this item use Item #: 112241, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412241) $24.76

Seat Adjustment Handle - For the following models: Hydro 100, 460, 504, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186. Replaces 372738R91, 372739R91, 373656R91, and 380725R91. (Item #: 105324, Ref: 1016119M91) $28.00

Seat Assembly - Black and white vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 101273, Ref: R1139) $590.00

Seat Assembly - Black vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 178440, Ref: R1140) $926.00

Seat Assembly - Black fabric on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 182099, Ref: R1141) $829.00

Seat Back - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 109272, Ref: R0866) $181.00

Seat Back - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127287, Ref: R3662) $212.00

Seat Back - Black Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066. Replaces 387174R92, 387175R1 (Item #: 127286, Ref: R0869) $220.00

No
Picture
Seat Bottom - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178455, Ref: R0865) $287.00

No
Picture
Seat Bottom - Black and White Vinyl on Wood For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178468, Ref: R0986) $143.00

Seat Bracket Set - Heavy gauge powder coated steel mounting brackets specifically designed for our IH6012 replacement cushion set. This bracket set replaces part numbers 387172R1, 387173R1, 387178R1. Hardware included. (Item #: 101255, Ref: IH6013) $58.00

Seat Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Compatible with International Hay Cutting(s) 275, 375, Replaces International OEM nos 379321R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431196) $31.01

Seat Cushion and Backrest Set - Black and white, 3 mounting holes on backrest. For tractor models 424, 544, 656, 664, 2424, 2544, 2656. (Item #: 178470, Ref: S.67200) $165.00

Seat Cushion Set - Black and white leatherette upholstery. Kit contains seat, lower and upper backrest. For tractor models 70, 86, 504, 544RC, 574, 606, 656 before serial number 14500, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504, 2706, 2756, 4100, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $140.00

No
Picture
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $200.00

$Farmall 544 Seat Cushion Set - 3 Piece, Vinyl, White\Black$
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $200.00

Seat, Shock Absorber - For tractor models 460, 504, 544, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, 2504, 2544, 2706, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 414 Cotton Picker, 420 Cotton Picker. Replaces 372751R91, IHS646. (Item #: 105342, Ref: 400072) $53.58

No
Picture
Seat Upper Back - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178456, Ref: R0867) $145.00

Spring Seat, Rubber - For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 460, 504, 544, 560, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1468, 1568, 4100, 4156, 4166, 4186, 656, 660, Hydro 100, Hydro 70, Hydro 86. Some of these models have a different seat (earlier version) that the left and right springs are different pin configurations and the center shaft has a collar that sticks up above the rubber..... These are not available. (Item #: 101285, Ref: 380712R1) $33.20

Sheet Metal / Body Parts

4th Step - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, Comes primered (color may vary). Prior to painting check fitment, (Item #: 114433) $90.00

Alternator Shield - This Alternator Shield fits 1026, 1256, 1456, 856, 544, 756, 826, 1206, 656, 706, 806, 2656, 2706, 2756, when using an alternator. Primered. Verify part number. Replaces 396360R1, 396360R2 (Item #: 126393, Ref: 396360R2) $48.30

Fender Bracket - Left Hand - For International / Farmall tractor models 504, 544, 656, 706, 756, 826, 856, 2504, 2544, 2656, 2706, 2756, 2826, 2856, Replaces International OEM number 399339R1, Fits left-hand side, Tires 34"-larger, Comes primered (color may vary). Prior to painting check fitment, For U-Bolt use Item #: 103853, Additional Handling and Oversize Fees Apply To This Item, (Item #: 103852) $63.98

No
Picture
Fender Bracket - Right Hand - For International / Farmall tractor models 504, 544, 656, 706, 756, 826, 856, 2504, 2544, 2656, 2706, 2756, 2826, 2856, Replaces International OEM number 399340R1, Fits right-hand side, Tires 34"-larger, Comes primered (color may vary). Prior to painting check fitment, For U-Bolt use Item #: 103852, Additional Handling and Oversize Fees Apply To This Item, (Item #: 103853) $102.87

No
Picture
Fender Grip - Grommet, fender hand grip. Tractors: 544, 565, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1026, 1206, 1256, 1456, 1466, 1468, 1566, 1568 and many more applications. Fits fenders 399329R2, 399328R2, 533187R1, 533188R1. (Item #: 103959, Ref: 388940R1) $9.00

Fender Handle Grommet - Outside diameter 5.750 inch x 2.750 inch, inside diameter 4.500 inch x 1.500 inch. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574 series A, 656, 66, 666, 674, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2500 series A, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256. Replaces 235700A1, 388940R1.235700A2 (Item #: 103959, Ref: R20759) $9.00

Fender Set, Dual Light Holes - Right Hand and Left Hand - For International / Farmall tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 399329R2, 399328R2, 393695R92, Two light holes, Left Hand and Right Hand Set, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Fender, Dual Light Holes - Left Hand use Item #: 103990, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 160453) $507.00

Fender Skin (LH) - For tractor models 1026, 1206, 1256, 1456, 544, 656, 706, 756, 806, 826, 856. This fender skin is used with 399335R1 bracket.Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103991, Ref: 399328R2) $283.00

Fender Skin (RH) - For tractor models 1026, 1206, 1256, 1456, 544, 656, 706, 756, 806, 826, 856. This fender skin is used with 399336R1 bracket.Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103990, Ref: 399329R2) $303.00

Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $215.00

Front Weight Locking Cam - This Front Cast Weight Locking Cam has an overall length of 3-1/2 inch. Two (2) used per tractor, priced and sold individually. Fits: Hydro 100, Hydro 186, Hydro 70, Hydro 84, Hydro 86, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 274, 284, 3088, 3288, 3488, 3688, 385, 484, 5088, 5288, 544, 5488, 584, 656, 664, 666, 684, 686, 766, 784, 786, 884, 886, 966, 986; Replaces: 536044R1, 74202C1 (Item #: 152234, Ref: 536044R1) $37.30

Grab Handle - Left Hand - For International / Farmall tractor models 544, 656, 666, 686, 2544, 2656 (all with Gear drive), Replaces International OEM number 389031R1, Fits Left Hand Side, (Item #: 121836) $48.80

Grab Handle - Right Hand - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, Replaces International OEM number 394939R1, Fits Right Hand Side, (Item #: 121837) $50.00

No
Picture
Handrail - Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, For Step Unit - Left Hand use Item #: 114440, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114429) $74.00

Handrail - Right Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Will only fit on tractors with no cabs., Comes primered (color may vary). Prior to painting check fitment, For Step Unit use Item #: 114429, (Item #: 114432) $77.15

Hood Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 389427R91, Size: 5/16"-18NC x 3/4", (Item #: 126532) $7.10

Rear Hood Side Panel, LH, Used - For International tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 378638R1, Left Hand, For Tractors with Side Headlights, For Right Hand use Item #: 435055, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435056) $49.01

No
Picture
Rear Hood Side Panel, RH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 378671R1, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434916) $55.01

Rear Hood Side Panel, RH, Used - For International tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 378639R1, Right Hand, For Tractors with Side Headlights, For Left Hand use Item #: 435056, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435055) $49.01

Step - LH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 2544, Replaces International OEM nos 399032R1, Hydrostatic Drive Tractors, Cast Iron, Mounting Bolts are Staggered, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432219) $60.01

Step Unit - For International / Farmall tractor models Hydro 70, Hydro 86, 504 (Farmall), 544, 656, 666, 686, Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, 4TH Step use Item #: 114429, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114440) $380.00

Suitcase Weight with IH Logo, Small Handle, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 258, 268, 274, 284, 385, 433, 434, 454, 464, 474, 484, 544, 585, 633, 656, 664, 666, 674, 684, 685, 686, 733, 766, 784, 786, 826, 884, 885, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 2544, 2656, 2826, Replaces International OEM nos 383393R2, 71200C1, 100 lbs, IH Logo, Small Handle, No "L" Cutout, Curved Bottom, Color may vary, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430803) $147.01

No
Picture
Weight - Suitcase, Front - For International / Farmall tractor models Hydro 84, Hydro 86, Hydro 100, Hydro 186, 274, 284, 464, 544, 666, 674, 686, 766, 786, 886, 966, 986, 1066, 1466, 1468, 1566, 1568, 1586, 2400, 2500, 2544, Replaces International OEM number 383392R2, 71199C1, Weight: 70 lbs, Comes In Red Primer, Thickness: 1-7/8", (Item #: 119701) $108.00

Steering

Axle - Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. (Item #: 120010, Ref: 7453) $966.00

Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Item #: 109489, Ref: 358976R31) $450.00

Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

No
Picture
Axle Extension Tube - Standard duty, 11-5/8". For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108809, Ref: 3036) $206.98

No
Picture
Axle Extension Tube - schwartz part (Item #: 110830, Ref: 3037) $198.98

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 111582, Ref: 7465) $343.00

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 172645, Ref: 7470) $406.00

Axle Knee - Used on International 544, 656, 2544, 2656 tractors, this axle knee is for 56 to 80 inch adjustable tread. The tube is 3.25 inches. The knee is 11.812 tall. Uses 124558 Bolts and 116643 nuts, sold separately. Replaces 397059R91. (Item #: 114387) $140.98

Axle Pivot Ball - Thread is 3/4 inch diameter, 16 thread. Ball is 1.75 inches in diameter. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 544, 560, 656, 666, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 70, (66 series with block type power steering cylinder end (late with axle pivot ball, NOT pin), (86, 88 series with axle pivot ball NOT pin). (Item #: 108885, Ref: 65320C3) $21.70

Axle Pivot Pin Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Item #: 109669, Ref: 48841D) $13.50

Bolster Pivot Pin - 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Item #: 109487, Ref: 358978R2) $27.70

Front Axle Clamp Pin - For International / Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, Compatible with International Construction and industrial models 21206, 21256, Replaces Case IH OEM number 350557R1, 0.739" Dia., 6.616" Long, 1.125" Head, For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle., With adjustable wide front axle, (Item #: 158235) $12.10

No
Picture
Front Saddle Assembly - Fits Schwartz front end ONLY. For tractor models 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, H, M, MTA, Super H, Super M. (Item #: 172611, Ref: 7443) $332.00

Heavy Duty Front Axle with Hubs - For International / Farmall tractor model 544, Converts narrow front to wide front., Heavy Duty., Not recommended for use with flotation tires., Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 119999) $2549.01

Jam Nut - For the following tractors: Hydro 100, Hydro 185, Hydro 70, 1026, 1066, 1086, 1206, 1256, 1466, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 460, 544, 560, 660, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 2WD STD AXLE: 5088, 5288, 5488. Replaces 374062R1 (Item #: 105244, Ref: 192928M1) $9.00

Jam Nut - For International / Farmall tractor models 504, 544, 606, 656, 2504, 2544, 2606, 2656, Replaces International OEM number 379329R1, 16 UN RH Thread, 13/16 OD, (Item #: 104404) $5.30

Knee Extension - With bushings 3 7/8 inch diameter. For 460, 544, 560, 660, 666, 686, 706, 806, 1206, 1256, Hydro 70. 370689R21 (Item #: 110386, Ref: R2953) $231.00

Knee with Bushings - A= 3.250 inch. For tractor models 2504, 2544, 2606, 2656, 504, 544, 606, 656, 664. (Item #: 110044, Ref: 379641R91) $384.00

Pivot Bolster - For tractor models 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster. (0011R) (Item #: 109484, Ref: 383909R4) $318.54

Pivot Bolster Pin - 1 1/2 inch diameter, 8 1/2 inches long. For 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster Pin. (2961R) (Item #: 173188, Ref: 379941R1) $64.00

No
Picture
Pivot Pin 4-3/16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 110958, Ref: 1394) $36.20

No
Picture
Pivot Pin, 6-11/16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super M, Super H. (Item #: 110959, Ref: 1393) $10.98

Pivot Pin Bushing Schwartz 60304 - For International / Farmall tractor models H, M, Super M, Super MTA, 300, 350, 400, 450, 504, 544, 560, 606, Replaces International OEM number 60304, Used on Wide Front conversion Kits., O.D.: 1.5", I.D.: 1.251", Length: 1.37", (Item #: 108886) $8.70

Pivot Pin Jam Nut - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, (Item #: 108889) $9.90

Pivot Pin Retaining Pin - For International / Farmall tractor models Hydro 70, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, Replaces International OEM number 251105R1, Dimensions: 3/8" x 4 7/8", (Item #: 170357) $4.30

Power Steering Pump, 391351R94 - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 391351R94, 391351R91, 9 GPM, (Item #: 100021) $560.00

Power Steering Pump, Used - For International tractor models Hydro 70, Hydro 86, 544, 656 (s/n 13013-later), 664, 666, 666 (Gear Drive and Hydrostatic Drive), 686 (Gear Drive), 2544, 2656, Replaces International OEM number 391351R94, 391351R91, 1949290C1, 395229R91, 9 GPM, For a new version of this item use Item #: 100021, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400021) $281.01

Rear Support Bushing - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, 1850, Replaces OEM number 60305, (Item #: 110729) $6.60

Replacement Plug - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Replaces International OEM number 1389, (Item #: 108806) $7.10

No
Picture
Replacement Pump Spring and Vane - For International / Farmall tractor models Hydro 70 (1/74-12/77), Hydro 86 (1/74-12/77), Hydro 100, Hydro 186 (1/72-12/78), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 666 (1/72-12/72), 686 (1/69-12/71), 706 (1/63-12/67), 706 (Farmall, 1/63-12/67), 756 (1/67-12/71), 756 (Farmall, 1/67-12/71), 766 (1/72-12/78), 786 (Diesel, 1/74-12/80), 826 (1/69-12/71), 826 (Farmall, 1/69-12/71), 856 (1/86-12/83), 886 (Diesel, 1/74-12/80), 966 (Diesel, 1/71-12/71), 986 (Diesel, 1/74-12/79), 1026 (Diesel), 1066 (Diesel, 1/74-12/78), 1086 (Diesel, 1/74-12/79), 1466 (Diesel, 1/72-12/77), 1468 (Diesel, 1/74-12/76), 1486 (Diesel, 1/74-12/79), 1586 (Diesel, 1/74-12/79), 2544 (Diesel), 2656 (1/63-12/71), 2706 (1/63-12/67), 2756 (1/69-12/71), 2826 (Diesel, 1/69-12/71), 2856 (Diesel), 3088 (Diesel, 1/81-12/86), 3288 (Diesel, 1/81-12/86), 3488, 3688 (Diesel, 1/81-12/86), 5088 (Diesel, 1/81-12/87), 5288 (Diesel, 1/81-12/87), 5488 (Diesel, 1/81-12/87), 21026 (Diesel), Compatible with International Hay Cutting (s) 375, Replaces International OEM number 405788R91, Spring and vane used with pumps: 382579R94 and 400187R93, (Item #: 165421) $72.98

Schwartz Heavy Duty Wide Front End with Hubs - For International / Farmall tractor models 460, 544, 656, Converts narrow front to wide front, Heavy Duty, Not recommended for use with flotation tires, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 120000) $3049.01

Schwartz Heavy Duty Wide Front End with Hubs - For International / Farmall tractor models 544, 656, 706, 756, 806, 856, Converts narrow front to wide front, Heavy Duty, Not recommended for use with flotation tires, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 120001) $3439.01

Spindle - For International / Farmall tractor models 460, 544, 656 (With Schwartz Front Ends), Replaces International OEM number 3273, Vertical length 11-3/8", Shaft dia. 1-5/8", Spline dia. 1-5/8", Inner brg. dia. 1.375", Outer brg. dia. .843", Seal dia. 1.746", Not recommended for use with flotation tires, (Item #: 109362) $167.00

No
Picture
Spindle - For International / Farmall tractor models 460, 544, 560, 656, 706, 806, 856, Vertical Length: 11-3/8", Shaft Diameter: 1-3/4", Spline Diameter: 1-5/8", Seal Diameter: 2", Outer Bearing Diameter: 1.374", Inner Bearing Diameter: 1.795", Used In Kit No. 119999, 120000, 120001, Additional Handling and Oversize Fees Apply To This Item, (Item #: 120007) $158.98

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80

No
Picture
Spindle Bushing - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 3010, 3020, 4000, 4010, 4020, Replaces OEM number 7469, 1139-61539, A24K, B1A24K, For Heavy Duty Wide Front Ends, Length: 1.502", OD: 2.002", ID: 1.755", (Item #: 108895) $13.80

Spindle Bushing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 186, 404, 424, 444, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 358958R2, 185106C1, 15943DA, (4) 358958R2 Bushings: 1-43/64" x 1-7/8" x 2", (2) 185106C1 Thrust Bearings: 1-3/4" ID x 2-3/4" OD, (2) 15943DA Dust Seals: 2-3/8" x 3" x 1/4", For Bushing use Item #: 102176, (Item #: 104350) $64.00

No
Picture
Spindle Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Replaces International OEM number 427546, 1-3/8"-12, (Item #: 100852) $4.00

Spindle - Left Hand, Used - For International tractor models 544 (with heavy duty steering knuckles), 560, 656 (with heavy duty steering knuckles), 706, 756, 806, 826, 856, 1026, 1206, 1256, Replaces International OEM number 383912R92, 370791R91, Left Side, Dimension A: 12.375", Dimension B: 1.667", Dimension C: 1.780", Dimension D: 1.375", For a new version of this item use Item #: 100843, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400843) $105.01

Spindle, LH - This spindle measures A= 12.375 inch, B= 1.667 inch, C= 1.375 inch, D= .842 inch. For tractor models 460, 544, 656. The wheel bearing kit used for this spindle is part number WBKIH2. (Item #: 100836, Ref: 383910R91) $205.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N, 129-290, 88886, 427639, 88886 (Item #: 156038, Ref: 387930S36) $1.10

Spindle, RH - This spindle measures A= 12.375 inch, B= 1.667 inch, C= 1.375 inch, D= .842 inch. For tractor models 460, 544, 656. The wheel bearing kit used for this spindle is part number WBKIH2. (Item #: 100835, Ref: 383911R91) $201.00

$Farmall 544 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 12.750 inch, B= 1.667 inch, C= 1.375 inch, D= .842 inch. For tractor models 460, 544, 656. The wheel bearing kit used for this spindle is part number WBKIH2. (Item #: 100837, Ref: 405427R92) $186.00

$Farmall 544 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 11.375 inch, B= 1.667 inch, C= 1.375 inch, D= .842 inch. For tractor models 504 utility, (544, 656 all utility serial number up to 13199), 606 utility. The wheel bearing kit used for this spindle is part number WBKIH2. (Item #: 100840, Ref: 406265R92) $158.00

$Farmall 544 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 11.375 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models (544, 656 utility serial number 13200 and up). The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 100841, Ref: 406267R92) $232.00

$Farmall 544 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 14.875 inch, B= 1.367 inch, C= 1.375 inch, D= .842 inch. For tractor models (544, 656 row crop serial number up to 13199). The wheel bearing kit used for this spindle is part number WBKIH2. (Item #: 100838, Ref: 406266R92) $189.00

Spindle, Used - For International tractor models 460, 544, 656, Replaces International OEM number 383910R91, Left Side, Dimension A: 12.375", Dimension B: 1.667", Dimension C: 1.375", Dimension D: .842", For a new version of this item use Item #: 100836, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400836) $115.01

Stay Rod Assembly - Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Item #: 167990, Ref: 360405R11) $500.00

Stay Rod Assembly, Used - For International tractor models H, HV, M, MD, Super H (s/n 19234-later), Super M (s/n 60001-later), 300, 350, 400, 450, 460, 544, 560, 656, 660, 706, 756, 806, 826, 856, 1026, 1206, 1256, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 360405R11, Wishbone, Adjustable Wide Front Axle, For a new version of this item use Item #: 167990, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429882) $325.01

Stay Rod Ball Socket Support, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, Replaces International OEM nos 402477R1, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433452) $385.01

Stay Rod Cap - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856, Hydro 70. (Item #: 108884, Ref: 60763DB) $15.00

No
Picture
Stay Rod Cap Shim - For Hydro 70, 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856. (Item #: 111364, Ref: 60762D) $4.80

Stay Rod Socket - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 826, 856, Hydro 70. (Item #: 108814, Ref: 535861R1) $27.30

Steering Arm - Fits Models, 2504, 2544, 2606, 2656, 504, 544, 606, 656. (Bushings NOT included: Please order 379554R1 and 379748R1 bushings if needed.) (Item #: 100880, Ref: 379555R11) $169.00

Steering Arm - Center. For tractor models 424, 444, 504, 544, 606, 656, 2424, 2444, 2504, 2544, 2606, 2656. (Item #: 100879, Ref: 379553R11) $195.00

Steering Arm - Center. For tractor models 504, 544, 606, 656, 2504, 2544, 2606, 2656. (Item #: 100880, Ref: R2948) $169.00

Steering Arm - Center For 544, 560, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256 (Item #: 100881, Ref: 358970R1) $95.00

Steering Arm - Left hand, 4.25 inch spline. For 504, 544, 606, 656. Replaces OEM number 379642R1. (Item #: 100883, Ref: R0262) $260.00

Steering Arm - Right hand, 4.25 inch spline. For tractor models 504, 544, 606, 656. (Item #: 100882, Ref: R0263) $253.00

Steering Arm - Left or right hand - keyed. For tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100884, Ref: R2949) $114.00

No
Picture
Steering Arm, LH - Left hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 109364, Ref: 2130) $92.00

No
Picture
Steering Arm, RH - Right Hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108808, Ref: 2129) $89.00

Steering Bracket Assembly - For International / Farmall tractor models H, M, MTA, Super H, Super M, 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, Replaces International OEM number 3049, (Item #: 110829) $106.00

No
Picture
Steering Pilot Valve, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 756, 826, 856, 1026, 2544, 2656, 2756, 2826, 2856, 21026, Compatible with International Combine(s) 403, 815, 915, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 527492R91, For a new version of this item use Item #: 112161, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435579) $225.01

Steering Support Housing, (LH) - For tractor models 2544, 2656, 544, 656, 666, 686. (Item #: 110755, Ref: 388736R1) $159.00

Steering Support Housing, (RH) - For tractor models 2544, 2656, 544, 656, 666, 686. (Item #: 110754, Ref: 388737R1) $139.00

Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $52.00

Steering Wheel Boot - Rubber cover for Orbit Motor. For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186, Hydro 70, Hydro 86, Hydro 100. Replaces IHS682. (Item #: 126655, Ref: 382587R1) $17.20

Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.40

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $63.00

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $70.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Thrust Bearing - Fits Models: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 1822, 1844, 2022, 2044, 21026, 2400A, 2500A, 2656, 2706, 2756, 2826, 2856, 300, 3088, 3288, 350, 3688, 380B, 385, 395, 400, 450, 454, 484, 485, 495, 504, 5088, 5288, 544, 5488, 560, 574, 584, 585, 595, 595XL, 656, 66, 666, 674 with STRAIGHT AXLE. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Thrust Bearing, Axle - Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Item #: 107048, Ref: T163) $21.70

Tie Rod - Long notched With seal and stud nut for Swartz front end. 18 inches long from center of ball joint to end of shaft. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H. (Item #: 111711, Ref: 22513) $37.40

Tie Rod Assembly - Complete assembly contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. Fits HYDRO 100, HYDRO 186, HYDRO 70, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1568, 1586, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986. Fits Factory International wide front axles only. Will not fit Schwartz, Speeco, Norden or other aftermarket wide front axles. (Item #: 100869, Ref: 223313) $85.00

Tie Rod Assembly - With HD FIXED FRONT AXLE. Assembly includes: 379329R1 Jam Nut-Tie Rod, 382569R92 Tie Rod Tube with End, (2) 382570R92 Tie Rods-Short. Fits 2504 (with HD FIXED FRONT AXLE, 2544 (with HD FIXED FRONT AXLE, 2606 (with HD FIXED FRONT AXLE), 2656 (with HD FIXED FRONT AXLE), 504 (with HD FIXED FRONT AXLE), 544 (with HD FIXED FRONT AXLE), 606 (with HD FIXED FRONT AXLE), 656 (with HD FIXED FRONT AXLE). (Item #: 104402, Ref: 380317R92) $129.00

Tie Rod Clamp - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 359986R1, (Item #: 104414) $3.20

Tie Rod, DU Axle - Used on Schwartz front ends, this is a sealed (New Style) Tie Rod. It measures 18.750 inches from center of ball joint to end of rod. The rod has a 1 inch diameter. (Item #: 108804, Ref: 22813) $61.00

Tie Rod End - Tie rod end, left-hand. Notched (6), 15-3/4 inch to center of post and .092 inch diameter. For adjustable front axles. 56 to 80 on tractors: 666, 686, Hydro 70 and 86. 58 to 82 on tractors: Hydro 100, 544, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, For 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, 5288, 5488, 666, 686, 766, 786, 886, 966, 986, HYDRO 100, HYDRO 70, HYDRO 86. Replaces 359984R93, 384441R93, 359984R1. (Item #: 100867, Ref: 359984R93) $25.00

Tie Rod End - Dimension A= 4.060 inch, B= 0.812 inch (16 UN right hand thread). Fits the following tractors with ADJUSTABLE CAST I-BEAM FRONT AXLE: Hydro 84, 454, 484, 485, 495, 544, 574, 585, 595, 595XL, 656, 684, 685, 695.YTO-379327R91_. (Item #: 104406, Ref: 379327R91_) $25.90

Tie Rod End - This Tie Rod End is 3.750 inches from the center of the ball joint to the end of the threaded shaft. 1.000 inch x 16 UN RH Thread It is used on 1420, 1440, 1460, 1620, 1640, 1660, 2504, 2544, (2606 with swept back axle), 2656, 504, 544, 606, 656, 664. (Item #: 104412, Ref: 379551R92) $66.00

Tie Rod End - Used on the following with non-adjusting Cast I Beam front axles: 574, 2400A, 2500A, 2544, 2656, 380B, HYDRO 84, 454, 484, 485, 495, 544, 584, 585, 595, 595XL, 656, 684, 685, 685XL, 784, 884, 885, 885XL, 895, 895XL. A= 4.00 inch, B= 13/16 inch, 16 left hand thread. Replaces 379326R91 (Item #: 104593, Ref: C5NN3A300C) $25.40

Tie Rod End - Heavy Duty - For International / Farmall tractor models 504, 544, 606, 656, 2504, 2544, 2606, 2656 (all with heavy-duty fixed axle), Replaces International OEM number 382570R92, 4.00" Long, .812" Diameter, 16 Right Hand Thread, Fits Heavy Duty Fixed Axles, (Item #: 100876) $44.30

No
Picture
Tie Rod, Inner - Inner tie rod with jam nut, seal and stud nut. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 103164, Ref: 22512) $35.40

Tie Rod Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 374062R1, 1.000" - 16 RH thread, (Item #: 104411) $8.20

Tie Rod, Long - This Tie Rod End is (A) 15.750 Inches long and has a (B) .920 Inch Diameter notched shaft. It is used on 2504, 2544, 2606, 2656, 504, 544, (606 with swept back axle), 656, 664. Replaces original part number (Item #: 100867, Ref: 379552R92) $25.00

Tie Rod Tube - Tube only. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108807, Ref: 1606) $24.98

Tie Rod Tube - For International / Farmall tractor models 504, 544, 606, 606 (wi/Swept Back Axle), 656, 664, 2504, 2544, 2606, 2656, Compatible with International Construction and industrial models 2504, Replaces International OEM number 379550R1, Dimension A: 17.000"Long, Dimension B: 1.187" O.D., (Item #: 104413) $20.90

Tie Rod Tube - For International / Farmall tractor models Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, Replaces OEM number 22514, (Item #: 110782) $52.00

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1/8 inch cotter pins, 1 dust seal. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 112262, Ref: 22812) $71.00

Tie Rod Tube with End - For International / Farmall tractor models 504, 544, 606, 656, 2504, 2544, 2606, 2656, Replaces International OEM number 382569R92, 16.625" Long, 1.000" Diameter, (Item #: 104403) $64.98

Wheels

Bearing Cone - Bearing cone. For tractor models 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 111288, Ref: 619386R91) $10.50

No
Picture
Complete Front Hub Assembly - For International / Farmall tractor models 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces OEM number 119999, 120000, 120001, 120002, 119998, Additional Handling and Oversize Fees Apply To This Item, (Item #: 120006) $169.00

No
Picture
Dual Hub Set, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 674, 686, 2544, 2656, Replaces International OEM nos 391279R1, 389539R1, 375463R1, Diameter: 2 3/4", 8 Bolt, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 464747) $450.01

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $112.00

Front Wheel Bearing - Bearing kit for front wheel, contains inner cone, inner cup, outer cone, outer cup, oil seal. For tractors: 1026, 1066, 1086, 1206, 1246, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2504, 2606 HD Front Axle, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 544, 5488, 460 hi clear, 560, 606, 656, 666, 685, 686, 706, 756, 754, 766, 786, 806, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86 (Item #: 100856, Ref: FW120FS) $34.20

Front Wheel Bearing Kit - Bearing kit, for front wheel, Contains Bearing LM603049-BP 1.781 inches ID, Bearing Cup LM603011-BP 3.062 inches OD, Bearing LM48548-BP 1.375 inches ID, Bearing Cup LM48510-BP 2.562 inches OD, Wear Sleeve 48703D-BP Hub Cap Gasket 369860R1 Lip Type Seal 22322-BP 2.250 inches ID, 3.250 inches OD. For tractor models 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 100856, Ref: 371418R91) $34.20

Front Wheel Hub, 6 Bolt - For tractor models 460, 504, 544, 656, 666, 686, Hydro 70, Hydro 86. Hub uses #WBKIH2 wheel bearing kit. (Item #: 104505, Ref: 395310R11) $169.00

Front Wheel Hub, 6 Bolt - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 544, 5488, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydrp 186, Hydro 70, Hydro 86. Hub uses FW120FS wheel bearing kit. Replaces: 370256R11, 370256R21, 391823R11 (Item #: 100877, Ref: 391823R11) $56.00

Front Wheel Hub, 6 Bolt, Used - For International tractor models 404, 424, 444, 460, 504, 544, 606, 656, 2404, 2424, 2444, 2504, 2544, 2606, 2656, Replaces International OEM nos 369141R11, 397092R11, Bolts: 6, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432420) $176.01

Front Wheel Hub Seal - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 544, 560, 584, 585, 656, 666, 674, 684, 685, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 885, 886, 966, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488 Replaces International OEM number 370254R1, , Compatible with John Deere Combine (s) 6600, Compatible with John Deere Harvester (s) 484, 5200, 5400, 5440, 5460, Replaces John Deere OEM number AH75484, (Item #: 123837) $9.30

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 703929R1. (Item #: 184824, Ref: 350719KIT) $23.00

Spindle Washer - For International / Farmall tractor models Hydro 70, Hydro 86, 385, 404, 424, 444, 454, 460, 484, 485, 504, 544, 584, 585, 606, 656, 664, 666, 674, 684, 686, 784, 884, 5088, 5288, 5488, Replaces International OEM number 369857R1, O.D.: 1.500", I.D.: .795", Thickness: .15", (Item #: 124771) $1.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 365326R1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

No
Picture
Wheel Bearing Kit - Kit contains 1 LM48548 bearing, 1 LM48510 bearing cup, 1 M12649 bearing, 1 M12610 bearing, 1 369860R1 hub cap gasket, 1 175272 seal, 1 48548D wear sleeve. For tractor models 2606, 460, 504, 544, 606, 656. (Item #: 100855, Ref: WBKIH2) $30.80

No
Picture
Wheel Bearing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Inner Bearing race I.D.: 1.780", Outer Bearing race I.D.: 1.375", Includes: Inner Bearing Cone and Cup, Outer Bearing Cone and Cup and 2 piece Seal without Retainer, (Item #: 176997) $56.68

Wheel Bolt - This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D. (Item #: 108605, Ref: WB916) $2.30

No
Picture
Wheel Hub - 6 bolt. For tractor models 544, 560, 656, 666, 686, 706, 766. (Item #: 100877, Ref: R2312) $56.00

Wheel Hub, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 504, 544, 560, 606, 656, 656U, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 815, 915, Compatible with International Harvester(s) 782, 1400, Replaces International OEM number 391823R11, HH391823, Replaces International Casting nos 370256R2, Casting No 370256R2, 6 bolt, For a new version of this item use Item #: 100877, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400877) $41.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.60

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $16.90

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.30

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.80

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.10

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $29.70

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $35.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.50

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.80

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $13.80

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.30

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.10

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.10

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.40

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $13.80

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $24.80

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.20

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.10

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.10

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.40

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $13.60

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.20

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70

$Farmall 544 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Farmall 544 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Farmall 544 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall 544 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Farmall 544 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Farmall 544 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Farmall 544 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

$Farmall 544 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $373.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $444.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $444.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $42.20

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $40.80

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $40.00

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $57.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.10

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.40

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $13.98

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $37.70

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00