FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 574 Tractor Parts

[Categories] [All Farmall Models] [Print]

Brakes

Brake Band with Lining - Used on Hand Brakes on International and CaseIH models 385, 454, 474, 475, 484, 485, 574, 584, 585, 674, 684, 784, 833, 885, this assembly replaces 401992R1, 401992R2, 401992R3, 1971050C1 (Item #: 105422) $134.00

Brake Disc - 10.190 inch outside diameter, 15 internal splines. For tractor models Used on International models 2400, 2400A, 248, 2500, 2500A, 268, 3220, 3230, 380B, 385, 395, 4210, 4230, 4240, 454, 464, 474, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84. Replaces 1027256C1, 114621C1, 114622C2, 399734R1 (Item #: 105452, Ref: 114622C2) $105.15

Brake Master Cylinder Repair Kit - For International / Farmall tractor models Hydro 84, 248, 258, 268, 278, 385, 454, 464, 474, 475, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 3125824R1, (Item #: 164006) $20.30

Brake Master Cylinder, Used - For International tractor models Hydro 84, 248, 258, 268, 278, 385, 454, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885 (s/n 003083-earlier), 2400A, Replaces International OEM number 527542R92, For a new version of this item use Item #: 116908, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 416908) $57.01

Brake O-Ring Kit - For tractor models 385, 395, 454, 464, 484, 485, 495, 574, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 895. Set of 6 O-Rings, 2 for brake piston, 4 for differential bearing carriers. (Item #: 105424, Ref: 539535R91) $37.90

Brake Plate - The measurements on the Brake Plate are ID: 8 1/8 inches (206mm) with 3 tabs, OD: 10 1/4 inches (259mm). This part replaces 399736R3, 984439C1. Used on International models 2400, 2400A, 248, 2500, 2500A, 268, 3220, 3230, 380B, 385, 395, 4210, 4230, 4240, 454, 464, 474, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84 (Item #: 105456, Ref: 399736R3) $82.00

No
Picture
Brake Ring, Used - For International tractor models 258, 278, 464, 574, 585, 674, 885, 2400, 2500, Replaces International OEM nos 399736R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443803) $50.01

Master Brake Cylinder - Assembly for Hydro 84, 385, 454, 464, 484, 574, 674, 784, 884, 2400A, 2500A. (Item #: 116908, Ref: 527542R92) $100.00

Clutch

No
Picture
Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-5/8 inch 10 spline, 3/4 inch pilot. For tractor models 364, 384, 385, 395, 494, 574, 584, 585, 595, 895, 995, 3230, 4210, 4220, 2400A, 2400B, (424, 2444 with single disc), 2500A, 2500B, 3500, 3500A. (Item #: 113942, Ref: S.70912) $22.80

Clutch Disc - For Models: 2400, 2400A, 2400B, 248, 2500A, 2500B, 258, 268, 3400A, 3434A, 3434B, 3500, 3500A, 3514, 380B serial number below 18106, 4500A, 4500B, 3210, 3220, 3230, 3400, 485, 485L serial number below 8250, 485XL serial number below 703, 495, 574, 584, 674, 684 serial number below 10338, 685L serial number below 12349, 685XL serial number below 3234, 784 serial number below 9490, 785L serial number below 16712, 785XL serial number below 1840, 884 serial number below 9396, 885 serial number below 3083, 885L serial number below 2690, 885XL serial number below 2990 11 inch diameter, 1-1/8 inch hub, 10 spline, 6 ceramic pads. Replaces 1944253C1, 293248A1, 3121507R93, 70093C91. (Item #: 122012, Ref: 70093C91) $134.00

No
Picture
Clutch Disc - For tractor models 454, 464, 574, 674 with gas engine 11 inch diameter, 1-1/8 inch hub, 10 spline, 3 Metallic Pads. (Item #: 401479R93) $149.85

Clutch Kit - This new single clutch kit contains a 11 inch, 3 spring, 10 spline 1 5/8 inch hub pressure plate assembly (1500655C92), a 11 inch, 6 pad, 10 spline, 1 1/8 inch hub clutch disc (293248A1), release bearing (405625R91), pilot bearing (537290R91), and pilot tool. Tractors: 384, 454, 464, 484, 485, 574, 584, 585, 674, 684, 784, 884, 2400A, 2400B, 2500A, 2500B, 3500A.70716NC (Item #: 118400, Ref: S.61265) $247.00

No
Picture
Clutch Pressure Plate Assembly - New pressure plate assembly, 11 inch, 10 spline, 1-5/8 inch hub. For tractor models 454, 464, 484, 574, 584, 674, 684, 784, 884. (Item #: 150356, Ref: 70716C1) $97.00

Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00

Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01

Clutch Release Fork - This Clutch Release Fork is used with 1970934C1 Clutch Bearing Carrier when used with a 12 inch clutch and 1971045C1 Clutch Bearing Carrier when used with an 11 inch clutch. Replaces 398342R2. (Item #: 111733, Ref: 398342R2) $79.00

Pressure Plate Assembly, 11 Inch - 11 inch outside diameter, 3 spring-3 finger, 10 spline with 1 5/8 inch hub. Clutch plate for Gas and Diesel applications. 2400, 2400A, 2400B, 248, 2500A, 2500B, 258, 268, 3400A, 3434A, 3434B, 3500, 3500A, 3514, 380B serial number below 18106, 4500A, 4500B, 3210, 3220, 3230, 3400, 485, 485L serial number below 8250, 485XL serial number serial number below 10338, 685L serial number below 12349, 685XL serial number below 3234, 784 serial number below 9490, 785L serial number below 16712, 785XL serial number below 1840, 884 serial number below 9396, 885 serial number below 3083, 885L serial number below 2690, 885XL serial number below 2990. Replaces 1500655C91, 1500655C92, 1500655C93, 1500655R1, 2726336C91, 529566R92, 68211C91, 70716C1, 92602C92, 128005541, 70716. (Item #: 150356, Ref: 68211C91) $97.00

PTO Clutch Kit - Clutch disc kit for single or dual speed independent PTO using 5 discs and 8 plates. Tractors: Hydro 84, 385, 395, 464, 484, 485, 495, 574 serial number 100001 and up, 84, 585, 595, 674, 684, 684, 685, 695, 784, 885, 2400A serial number 100001, 2500A serial number 100001 and up. For 2400A, 2500A, 385, 395, 464, 484, 485, 495, 574, 584, 585, 595, 634, 674, 685, 695, 784, 884, 885, HYDRO 84. Kit includes, 5 DISCS (401716R2), 8 PLATES (66188C1), 1 O-RING (401723R1), 1 O-RING (401724R1), 6 SPRINGS (66182C1). (Item #: 124694, Ref: 66193C91) $148.00

Cooling System

Fan, 5 Blade - For tractor models 380B, 385, 395, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884. (Item #: 124624, Ref: 1275810C1) $139.00

Fan, 6 Blade - 18.50 inch diameter, 1.250 inch pilot hole, 1.937 inch center to center on mounting bolt holes. For tractor models (2500A, 2500B gas), (574, 674 Hydro with gas), (784 diesel serial number 9413 and up). (Item #: 163844, Ref: 84355C1) $142.00

Radiator - Core size 18.125 inches wide, 18.5 inches high, fits applications with hinged swing out oil coolers. If you have a bolt on oil cooler use radiator 1536373C1. For tractors: 380B, 484, 485, 574 DIESEL, 584 serial number 8271 and up, 585, 684, 685, 784, 885 without AC, Hydro 84. This radiator uses cap part number R2222. (Item #: 101712, Ref: 84524C93) $250.00

No
Picture
Radiator - For 484, 574 Diesel, 584 (FromS#8271), 684, 784, Hydro 84 (Item #: 101712, Ref: R2743) $250.00

Radiator Cap - This 10 pound radiator cap with cover is used on multiple tractors. It replaces original part numbers 527425R1, 532672R91, 532029R1, 532029R2, 3118639R1, 1500626C91. (Item #: 114950, Ref: 1500626C92) $16.20

Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.60

Radiator Hose Lower - Radiator hose, lower, for gas tractors. For 574, 674 (Item #: 117707, Ref: 402204R1) $16.50

Radiator Hose Lower - Radiator hose, lower. For tractor models (574, 674 diesel), 584, 684, 784, 884 (Item #: 117711, Ref: 402205R1) $14.20

Radiator Hose Upper - Radiator hose, upper, for diesel tractors. For 574, 584, 674, 684, 784, 884, HYDRO 84 (Item #: 117702, Ref: 402207R1) $14.90

Radiator Hose, Upper - Radiator hose, upper, for gas tractors. For tractor models 574, 674. (Item #: 117701, Ref: 402206R1) $6.98

Thermostat, 180 Degree - For Diesel models 1046, 1055, 1056, 1255, 1455, 353, 385, 423, 454, 474, 484, 485, 523, 574, 584, 585, 644, 674, 684, 685, 724, 743, 745S, 784, 785, 844, 844S, 845, 856, 884, 885, 946, 955, 956. All with one of the following engines: D358, DT358, DT402, D155, D179, D206, DT239, D239, D246, D268, D310. (Item #: 116901, Ref: 3059676R91) $14.40

Water Pump - Does not come with rubber mounting seal or back plate. For tractor models 2544, 3400A, 3414, 3500A, 3514, 4500A, 4500B, 454, 464, 544, 574, 674. All with either C157, C175 or C200 engines. (Item #: 110070, Ref: 400677R92) $115.00

Water Pump - For tractor models 380B, 454, 464, 484, 584, 574, 674, 684, 2500A, Hydro 84, 784. Water Pump for a diesel comes with hub installed and a gasket. Replaces 3136053R92-R, 3136053R93, 3132739R94, 3136053N. Casting number 3132677R1, 3132677R2. (Item #: 100792, Ref: 3136053R92) $66.00

Water Pump Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2500A, 2500B, 2544, 8000 (LIFT TRUCK), Replaces International OEM number 397968R2, (Item #: 154674) $2.00

Water Pump Hose - This New water pump hose with an inside diameter of 1.5 inch on the smaller side and 1.875 inch on the larger side. This water pump hose fits the Case-IH Tractor 454 (with D179 engine), 574 (with D239 engine), and 674 (with D239 engine). Replaces B513977, VPE4123) (Item #: 167574, Ref: 3132144R1) $8.80

No
Picture
Water Pump - New - With Hub For 454, 464, 484, 574, 584, 674, 684, 784, 2500A, Hydro 84 with D179, D206, D239, or D246 Engine s (Item #: 100792, Ref: WP1729) $66.00

Water Pump, Remanufactured, 400677R92, 397965R2 - For International / Farmall tractor models 454, 464, 544, 574, 674, 2544, 3514, Compatible with International Construction and industrial models 260, 2400A, 2400B, 2500A, 3400A, 3500A, 4500, Replaces International OEM number 400677R92, 397965, Replaces International Casting number 397965R2, Engine: C157, C175, C200, Includes pump to backplate gasket, Includes backplate to block gasket, Includes bypass seal, With hub, Without backplate, (Item #: 205223) $117.01

Decals and Emblems

No
Picture
Decal Set - For 574. Contains 2 HOOD ONLY decals. (Item #: 183247, Ref: R3475) $63.00

Front Emblem - Plastic "IH", red, black and silver, 3-3/8 inch x 3-1/8 inch. For tractor models 248, 258, 274, 278, 284, 384, 385, 433, 484, 485, 522, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 782, 784, 785, 786, 833, 844, 884, 885, 886, 986, 1086, 1400, 1486, 1586, 3388, 3588, 3788, 4366, 4568, 4586, 4786, 4886, Hydro 84, Hydro 186. (Item #: 122820, Ref: 120397C1) $25.00

International 574 Hoods Decal Set, Vinyl - For International / Farmall tractor model 574, (Item #: 100979) $176.00

Drive Train

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90

No
Picture
Hydrostatic Transmission, Remanufactured, 573098R - For International / Farmall tractor models Hydro 84 (With Hand Control), 574 (With Hand Control), 2500 (With Hand Control), Replaces International OEM number 573098R, (Item #: 200263) $8100.01

Hydrostatic Transmission, Remanufactured, 573098R - For International / Farmall tractor models Hydro 84 (With Foot Control), 574 (With Foot Control), 2500 (With Foot Control), Replaces International OEM number 573098R, (Item #: 205089) $8100.01

IPTO Drive Shaft - When replacing earlier Independent PTO shafts 398235R1 or 66347C3, you must also replace 71229C1 carrier and 108982C1 seal (not available through Yesterday's Tractors. This shaft has 10 splines and 21 teeth. Used on International models: 454, 464, 484, 574, 584, 674, 684, 784, 884, 2400A (Item #: 124724, Ref: 71230C2) $142.00

Transmission Input Shaft Oil Seal - This transmission input shaft oil seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: 2500, 2500A, 464, 574. Replaces: 351276R91, 358775R91, 358804R91, 358815R91, 358838R91, 382230R91, 383333R91, 47703D, 530098R91, 65418C1 (Item #: 169955, Ref: 471765) $9.10

Electrical System

Alternator - Tisco remanufactured Delcotron alternator, 42 amp, internal regulator, 3 terminal 3 o-clock position. Sold outright, no core, deposit, or return. Tractors Cub, Hydro 70, Hydro 86, 100, 186, 140, 464, 574, 666, 674, 868, 766, 786, 886, 986, 966, 1066, For 100, 1066, 1086, 140, 1466, 1468, 1486, 1566, 1568, 1586, 186, 2500A, 464, 574, 666, 674, 686, 766, 786, 86, 886, 966, 986, Cub, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 113608, Ref: 1100583) $115.00

Alternator - Delco style alternator, 72 amp, internal regulator, 3 terminal 3 o-clock position. Tractors: Cub, Hydro 186, 574, 786, 886, 986, 1086, 1486, 1586, 2500A. For 1086, 1486, 1586, 2500A, 574, 786, 886, 986, Cub, HYDRO 186 (Item #: 110572, Ref: 1102920) $116.00

Alternator - 12 volt, 55 amp. For tractor models (856D 1967 to 1971 with 407 diesel), (1026D, Hydro 1026D 1970 to 1971 with 407 diesel), (1206D 1965 to 1967 with 361 diesel), (1256D 1967 to 1969 with 407 diesel), (1456D 1969 to 1971 with 407 diesel), (444 1967 to 1971 with 153 gas), (454 1970 to 1971 with 157 gas), (454D 1970 to 1973 with 179 diesel), (544 1968 to 1973 with 200 gas), (544D 1968 to 1973 with 239 diesel), (574 1970-72 with 200 gas), (574D 1970-72 with 239 diesel), (606 1965 to 1967 with 221 gas/LPG), (606D 1965 to 1967 with 236 diesel), (2444 1968 to 1970 with 153 gas), (2444D 1968 to 1970 with 154 diesel), (2544 1969 to 1970 with 200 gas), (2544D 1969 to 1970 with 239 diesel), (2656 1971 to 1972 with 263 gas/LPG), (2656D 1971 to 1972 with 268 diesel), (2756 1967 to 1971 with 291 gas/ 310 diesel), (2806 1965 to 1967 with 301 gas), (2806D 1965 to 1967 with 361 diesel), (2826 1970 to 1971 with 301 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720, 1100771. (Item #: 113606, Ref: ADR0231) $123.00

Alternator - 12 volt, 72 amp. For tractor models (453 1975-79 with 301 gas), (453D 1975-79 with 360 dsl), (715 1975-79 with 301 gas), (715D 1975-79 with 310 dsl), (815 1971-74 with V304 gas/V345 LPG), (815D 1971-79 with 414 dsl), (915 1971-74 with V392 gas/345 gas ot LPG), (1420 1978-86 with 358 dsl), (1430D 1980-84 with 358 dsl), (1440D 1974-86 with 436 dsl), (1460D 1977-86 with 436 dsl), (1480 1977-79 with 466 dsl), (666D 1972-76 with 312 dsl), (Hydro 70D 1973-76 with 312 dsl), (Hydro 100D 1973-76 with 436 dsl), (Hydro 186D 1976-81), (Hydro 686 1976-80 with 291 gas), (Hydro 686D 1976-80), (140, 140HC 1975-79 with 123 gas), (464 1975-78 with 175 gas), (464D 1977-78 with 179 dsl), (574 1975-78 with 200 gas), (574D 1977-78 with 239 dsl), (674, 674RC 1978-84 with 200 gas), (674D, 674DRC 1978-84 with 239 dsl), (686 1976-80 with 291 gas), (686D 1976-80 with 312 dsl), (766D 1971-76 with 360 dsl), (886D 1976-81 with 360 dsl), (966D 1971-76 with 414 dsl). Replaces 1102921, 1102922, 1100587, 1105573. (Item #: 110572, Ref: ADR0133) $116.00

Alternator - 12 volt, 63 amp. For tractor models (453 1972 to 1974 with 301 gas), (453D 1973 to 1974 with 360 diesel), (615 1972 to 1974 with 263 gas), (715 1972 to 1974 with 301 gas), (95 1974 to 1978 with 301 gas), (416, 422 1973 to 1978 with 263 gas/LPG or 282 diesel), (666 1972 to 1976 with 291 gas), (Hydro 70 1973 to 1976 with 291 gas), (454 1972 to 1973 with 157 gas), (464 1973 to 1974 with 175 gas), (574 1973 to 1974 with 200 gas), (766 1971 to 1976 with 291 gas), (2500A, 2500B 1972 to 1974 with 200 gas). Replaces 1100589, 1100593. (Item #: 113330, Ref: ADR0151) $126.00

Alternator - 12 volt, 63 amp. 3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For tractor models (715D 1972-74 with 301 dsl), (95 1974-79 with 310 dsl), (666D 1972-76 with 312 dsl), (Hydro 70D 1973-76 with 312 dsl), (Hydro 100D 1973-76 with 436 dsl), (140, 140HC 1973-74 with 123 gas), (464D 1973-76 with 360 dsl), (574D 1973-76 with 239 dsl), (766D 1971-76 with 360 dsl), (966 1971-76 with 414 dsl), (1066D 1971-76 with 414 dsl), (1466D 1971-76 with 436 dsl), (1468D 1971-74 with 550 dsl), (1566D 1974-76 with 436 dsl), (1568D 1974-76 with 550 dsl), (2500A-D, 2500B-D 1972-74 with 239 dsl), (4166D 1972-76 with 436 dsl), (4366D 1973-76 with 466 dsl). Replaces 1100581, 1100578. (Item #: 111768, Ref: ADR0239) $110.00

Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $17.00

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90

Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $11.10

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $11.10

Key Switch, 5 Terminal - 3 position, with keys. For tractor models 1086, 464, 574, 674, 786, 886, 986, 1486, 1586, 2500A, 3388, 3588, 3788, 4386, 4568, 4586, 4786, Hydro 186, 715, 815, 915, 1440, 1460, 1480. (Item #: 155916, Ref: 107682C1) $38.60

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $29.30

Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $30.00

No
Picture
Starter - For tractor models (464 with 179 Diesel 1973-79), (464 AG Tractor 1977-78), (647 with 239 Diesel 1977-79), (574 AG Tractor 1977-78), (464 with 179 Diesel gear drive 1973-74), (674 with 239 Diesel STD 1973-74), (2400 with 179 diesel, 2500 with 239 Diesel, 3400 with 179 Diesel, 3500 with 239 Diesel all 1973-74), (4500 with 179 Diesel 1973-74). REBUILT Starter. 12 Volt. No exchange. (Item #: 104180, Ref: 1107867) $170.00

Starter, Delco - Has 11 teeth, clock wise rotation, 12 volt. Fits 454, 464, 574, 674, 2400A, 2500A. Add $45 core charge. Replaces 104191A1R, 1108394, 403299R91, A482112Z (Item #: 203161, Ref: 1108394) $350.46

No
Picture
Starter - Delco Style DD (4939) - For International / Farmall tractor models 454, 464, 574, 674, 2500A, 2500B, Compatible with International Construction and industrial models 2400A, 2400B, 2500A, 2500B, 3400A, 3500A, Replaces International OEM number 403299R91, A482112Z, Replaces Delco Remy manufacturer number 1108394, Replaces manufacturer number 4939, 140-707, 91-01-4201, Delco Style Direct Drive, Gas models only with Delco starters, Voltage: 12, Rotation: Clockwise, Teeth: 11, For gas applications, For a Remanufactured version of this sku use Item #: 203161, (Item #: 160368) $223.00

Starter, Diesel - For 179/239 Diesel engines. 12 volt, 10 tooth, clockwise rotation. For tractor models (454D 1970 to 1973 with D-179 diesel), (464D 1973 to 1978 with D-179 Diesel), (574D 1970 to 1978 with D-239 diesel), (674D, 674DRC 1978 to 1984 with D-239 diesel), (2500A-D, 2500B-D 1972 to 1974 with D-239 diesel), (715D 1971 to 1974 with D-301 diesel). Replaces 1113690, 1113650. (Item #: 102202, Ref: SDR0076) $312.91

Starter Drive - Starter drive, services Delco starters: 1107867, 1113203, 1113690. Tractors: Hydro 84, 454, 464, 574, 674, 684, 2400A, 2500A. 10 teeth. For 2400A, 2500A, 454, 464, 574, 674, 684, HYDRO 84. YTO 1877355 (Item #: 113469, Ref: 1877355) $27.70

Starter Drive - Has 11 teeth. For 1108155 and 1108394 Delco starter in: 454, 464, 574, 674, 2400A, 2500A. 11 Teeth, 3-13/16 inches long. (Item #: 110777, Ref: 1932897) $39.61

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Starter Motor - Fits 454, 474, 574, 674, 484, 584, 684, 784, 884, 6858, 485, 485XL, 585, 585XL, 685, 685XL, 785, 785X, 885, 885XL, 985XL, 395, 495, 495XL, 595, 595XL, 695, 695XL, 795, 795XL, 895, 895XL, 995XL, 2310, 3220, 3230, 4210, 4220, 4230, 4240, 84 Hydro. Replaces these starter numbers in the above models: B514002, SLU0013, TS-1212, TS-4030, 1107867, 114568A1, 114568A2, 114568A3, 189330A5, 1998343, 230428A1, 230428A3, 537140R91, 537140R96, SDR0214. (Item #: 104180, Ref: 537140R95) $170.00

Starter, Used - For International tractor models 454, 464, 574, 674, 2400A, 2400B, 2500A, 2500B (all diesel), Compatible with International Combine(s) 715, Compatible with International Construction and industrial models 2400A, 2400B, 2500A, 2500B (all diesel), 3400A, 4500, Compatible with Massey Ferguson tractor models 70, 285, 1080, 1085, 1100, 1105, 1130, 1135, Compatible with Massey Ferguson Combine(s) 510, 540, 550, 750, 760, 850, 860, 865, Compatible with White tractor models 2-70, 2-85, 2-105, 2-110 (all diesel), Compatible with White Combine(s) 7300, 8600, 8700, 8800, 8900, 8920, Replaces OEM number 10461003, 10461225, 10478831, 1113641, 1113651, 1113676, 1113683, 1113690, 12301387, 141-203, 141-213, 141-281, 141-351, 141-361, 1903109M91, 1903109V91, 1903111M91, 1990309, 1993769, 1993886, 3368, 3991, 4906, 50-159, 518884M91, 519977M92, 6382, 1113640, F3HT11001BA, White 2-70, 2-85, 2-88, 2-105, 2-110 (all diesel), 12 Volt, Delco style, 10 Tooth, For a new version of this item use Item #: 102202, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402202) $154.01

Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.20

Switch - Ignition switch, 6 prongs, includes 2 keys. For tractors: Hydro 84, 354, 454, 464, 484, 574 to serial number 114908, 584, 674, 684, 784, 884, 2300, 2400, 2500 to serial number 114908. For H, HV, M, MD, MDV, MTA, MV, Super M. (Item #: 111509, Ref: 529800R91) $8.10

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.50

Tune-up Kit - Kit contains points, condenser, rotor, gap gauge and AL386 spark plugs. VERIFY SPARK PLUG SIZE as this kit comes with AL386 that are 18MM, 1/2 inch reach and 7/8 hex size. For tractor models 454, 464, 544, 574, 674 all with 4 cylinder engines all with a Delco Distributor with a screw type cap. Verify correct spark plug size and type (Item #: 182530, Ref: MF-ITK-40) $25.90

Voltage Regulator, Internal - Alternator regulator, internal, heavy duty, replaces Delco numbers 1116392 and 1116387. Services Delco alternators: 1100578, 1102375, 1100583, 1100585, 1100587, 1100593, 1102920, 1102921, 1103160, 1103171, 1103183, 1103184, 1103971, 1105164, 1105538, 1107178, 1116. For tractors: 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 172582, Ref: 585624C1) $5.60

Engine Bearings

Camshaft Bearing, Front - The Bearing is used on C157 engines in models: 2400A, 2400B, 2405B, 2410B, 454; C175 Engines on models: 2400A, 2400B, 2405B, 2410B, 3400A, 3514, 454, 464; C200 Engines on models: 544, 574, 674. To complete the cam bearing set for these engines, also order CBK-H221 (you will not use this whole set). (Item #: 106668, Ref: 398019R1) $88.00

Camshaft Bearing - Intermediate - For International / Farmall tractor models 454, 544, 574, 674, 2400A, 2400B, Compatible with International Harvester (s) 55, 350, 414, 420, 550, 650, Compatible with International Engine (s) C157, C200, Replaces International OEM number 70261R2, Requires 1 per engine, Sold Individually, (Item #: 106669) $91.00

Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10

Camshaft Bearing - Rear - For International / Farmall tractor models 454, 544, 574, 674, 2400A, 2400B, Replaces International OEM number 70262R1, Engine C157, C200, Requires 1 per engine, (Item #: 106670) $70.00

Main Bearings - .010" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106603, (Item #: 106601) $97.00

Main Bearings - .020" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106603, (Item #: 106602) $144.00

Main Bearings - .030" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106602, (Item #: 106603) $71.98

Main Bearings - Standard - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106603, (Item #: 106600) $145.00

Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $8.80

No
Picture
Rod Bearing, Standard - For tractor models 544, 574, 674 all with C200 gas engine. (Item #: 106485, Ref: CB-550P) $13.20

Engine Gaskets

Conversion Gasket Set - For International / Farmall tractor models 454, 460, 544, 574, 606, 674, 2400, 2400A, 2400B, 2500A, 2500B, 2606, 3616, Compatible with International Construction and industrial models 2505B, 3500A, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 398178R92, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, Crankshaft seals included, (Item #: 106724) $145.00

Conversion Gasket Set - Lower - For International / Farmall tractor models Hydro 84, 544, 574 (Engine s/n D103203-later), 584 (Engine s/n D319017), 585, 624, 654, 664, 674, 684 (Engine s/n D475097), 685 (Engine s/n D679081-later), 784, 884 (Engine s/n D052919-later), 885, 2500 (Engine s/n D103203-later), 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7, TD7 (E, Engine s/n 53692-later), TD8 (C), TD8 (E, Engine s/n 5988-later), 100, 100 (E, Engine s/n 53692-later), 125, 125 (C), 125 (E, Engine s/n 5988-later), 250A (Gear Drive, Engine s/n 640235-later), 260A (Engine s/n 706836-later), 270A, Compatible with International Engine (s) D206, D239, D246, D268, DT268, Compatible with International Hay Cutting (s) 275, 375, 4000 (Engine s/n D021186), 5000 (Engine s/n D021186), 5500 (Engine s/n D021186), Replaces International OEM number 1967011C1, 3136813R99, 3228431R92, Replaces McCormick OEM number 3228431R92, Contains all gaskets necessary to complete an overhaul that are not included in head set, (Item #: 106727) $59.00

Front Crank Seal - Diesel - Front seal package contains seal and wear ring. For tractor models with diesel engines: 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 162141, Ref: 3228133R93) $60.00

Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.20

Head Gasket Set - For tractor models 544, 574, 674 with C200 Gas 4 Cyl Engine. (Item #: 106685, Ref: HS3535) $98.00

No
Picture
Head Gasket Set Diesel - For 544, 574, 674, 684 with D239 Diesel Engine (Item #: 106688, Ref: HS3557) $53.00

No
Picture
Lower Gasket Set, Diesel - For tractor models 2544, 474, 544, 574, 584, 585, 664, 674, 684. All with 239 diesel engines. (Item #: CS4239D) $230.94

No
Picture
Lower Gasket Set Gas - For tractor models 424, 444, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B all with C157 gas engine and 544, 574, 674 all with C200 gas engine. (Item #: 185102, Ref: CS3535) $138.00

Oil Pan Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, Compatible with International Construction and industrial models 2400A, 2400B, 3514, Replaces International OEM number 405858R1, Engine: C-157, C-200 Gas, Oil Pan Gasket Only, (Item #: 106704) $22.00

No
Picture
Oil Pan Gasket Diesel - OIL PAN GASKET For 2544, 474, 544, 574, 584, 585, 664, 674, 684 all with 239 diesel. (Item #: 106705, Ref: 3055161R3) $13.90

Push Rod Cover Gasket - This Push Rod Cover Gasket is used on C157, C175 and C200 Engines. Used on 2400A, 2400B, 2405B, 2412B, 2410B, 3500A, 2505B, 574, 544, 2500B, 2500A, 2544, 2510B, 2514B, 674, 3514, 3400A, 464, 375. Replaces 398040R2, 398040R3 (Item #: 184154, Ref: 398040R2) $18.40

Rear Crank Seal Diesel - For the following engines: D327-4, TD327-3, DT268 Turbo Diesel, D155 Diesel, D179 CID, D206 CID, D226-B6, D226-3, D226-4, D226-6, D227-4, D227-6, D239 CID, D246 Diesel, D268 Diesel, D310 CID, D325-2, D325-3, D327-2, D327-3, D358 CID, TD226-B6, TD226-4, and TD228-6. Inside diameter 110mm, Outside diameter 130mm, Width 12.7mm. Does not include wear sleeve. Order RP301113 if wear sleeve is need. Replaces 7701021418, 6005605198, 3138701R91, X550174902000, 89965016008 (Item #: 106657, Ref: 3138701R91) $21.20

Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $21.90

Rear Crank Wear Sleeve - This Rear Crankshaft Seal is used for 110mm rear crankshafts on: D155 Diesel Engine, D179 Diesel Engine, D206 Diesel Engine, D239 Diesel Engine, D246 Diesel Engine, DT268 Diesel Engine, D310 Diesel Engine, D358 Diesel Engine. Used with 3138701R91 Seal (not included). (Item #: 106658, Ref: RP301113) $150.00

Valve Cover Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 3514, Compatible with International Engine (s) C157 (gas), Replaces International OEM number 398068R3, 398068R1, 398068R2, 398068R4, Replaces manufacturer number 7398068, (Item #: 158261) $16.60

Engine Rebuild Kits

Engine Rebuild Kit - Less Bearings - .020" Oversize Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Standard Bore: 3.8125", Stroke: 4.390", Kit includes: .020" Oversize Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, (Item #: 131093) $556.00

Engine Rebuild Kit - Less Bearings - .030" Oversize Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Standard Bore: 3.8125", Stroke: 4.390", Kit includes: .030" Oversize Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, (Item #: 131094) $573.00

No
Picture
Engine Rebuild Kit - Less Bearings - Standard Pistons, C200 - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 3500A, Compatible with International Engine (s) C200 (gas), Bore: 3.8125", Stroke: 4.390", Kit includes: Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130602) $556.00

No
Picture
In-Frame Overhaul Kit - 3 7/8 inch bore. For 544, 574, 674, 684 with D239 Diesel Engine. Contains pistons with pins and retainers, piston sleeves, piston rings, head gasket set, oil pan gasket set, rod bearings, main bearings. (Item #: 184904, Ref: R3403-IFK) $1389.01

Piston and Rings International 392836R92 - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2806, 2826, 2856, Compatible with International Engine (s) C200, C301, Replaces International OEM number 392836R92, .30" Oversize, Includes pin and retainers, (Item #: 128737) $84.00

No
Picture
Rebore Kit - .020 Oversize. For tractor models 544, 574, 674 with C200 Gas Engine. (Item #: R4862) $358.80

No
Picture
Rebore Kit - 3 13/16 inch bore. For tractor models 544, 574, 674 with C200 Gas Engine. (Item #: R3399) $358.80

No
Picture
Rebore Kit - .040 Oversize. For tractor models 544, 574, 674 with C200 Gas Engine. (Item #: R3401) $385.80

No
Picture
Valve Overhaul Kit - For tractor models 474, 584, 585, 544, 574, 664, 674, 684, 2544 (4 cylinder Diesel D206, D239 CID). Kit includes valves, valve springs, valve keys, valve guides. (Item #: 184184, Ref: VOKH239) $846.00

Engine Parts

Balancer - This Balancer is used in D206, D239, D246 engines. It replaces original part numbers 3132874R91, 3132874R92, 3132874R93, 3228366R91, 3132895R92, 3132895R91, 3132874R94. (Item #: 104256, Ref: 3132874R93) $342.00

Bare Block, Remanufactured, 3136316R - For International / Farmall tractor model 574, Replaces International Casting number 3136316R, Engine: D239, Casting Number (s): 3136316R, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 203945) $2175.01

No
Picture
Camshaft Bearing Set - For International / Farmall tractor models Hydro 84, 544, 574, 584, 585, 624, 654, 664, 674, 684, 685, 784, 844, 884, 885, 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7 (E), TD8 (E), TD8 (C), 100 (E), 100, 125 (E), 125 (C), 125, 250A, 260A, 270A, 584, 2500B, 2505B, 2510B, Compatible with International Engine (s) D206, D239, D246, D268, D358, Compatible with International Hay Cutting (s) 275, 375, 4000, 5000, 5500, 5 journal camshaft, finished I.D., (Item #: 186179) $102.00

Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01

Connecting Rod, Reconditioned - The Reconditioned Connecting Rod is used in 454, 464, 574, 674, 484, 684, 784, 884, 485, 585, 685, 785, 885, 495, 595, 695, 895, 2400, 2500, 3400, 3500, 3600, 250A, 260A tractors with D-179, D-239, D-246 Engines. Replaces 1967032C1 and 3055030R24. There is a core charge of $25, when you return your old part, we'll refund the core. (Item #: 210200, Ref: 3055030R24) $109.01

Crankshaft - For tractor models 684, 685, 695, 784, 4210, 4230, (4240 with D239 engine). Replaces 3144626R91, 3144626EX, 3132928R94, 3132752R11, 3132982R94, 3132928R93, 3132928R92, 3132928R91, 3132982R93, 3132982R92, 3132982R91, 3055038R21, 3055790R91 (Item #: 100784, Ref: 3144626R92) $653.00

Crankshaft Balancer Gear - This Balancer Gear is used on D206, D239 and D246 Engines. It has 80 teeth. Replaces 3136237R1. (Item #: 158267, Ref: 3136237R1) $116.00

Crankshaft Gear - This Crankshaft Gear has 33 teeth. It is used on D155, D179, D206, D239, D246 and D268 Engines. Replaces original part number 3055028R1. (Item #: 150037, Ref: 3055028R1) $155.00

No
Picture
Crankshaft, Remanufactured, 397817R - For International / Farmall tractor models 544, 574, 674, Compatible with International Engine (s) C175, C200, Replaces Casting number 397817R, Straight tooth balancer gear, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200247) $570.01

Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30

No
Picture
Cylinder Head, Remanufactured, 3055049R - For International / Farmall tractor models 544, 574, 674 (Diesel), Replaces International Casting number 3055049R, Engine D239, Cylinders 4, Casting No. 3055049R, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200206) $1000.01

No
Picture
Cylinder Head, Remanufactured, 398065R - For International / Farmall tractor models 454, 464, 544, 574, 2400, 3514 (Gas), Compatible with International Construction and industrial models 3514 (Gas), Replaces International Casting number 398065R, 406790R, Engines C-157, C-175, C-200, Cylinders 4, Casting No. 398065R, 406790R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200205) $950.01

No
Picture
Cylinder Head, Used - For International tractor models 574, 585, 674, 2500A, Replaces International Casting number 3055367R, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 204147, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404147) $570.01

No
Picture
Cylinder Head with Valves, Remanufactured, 3055049R - For International / Farmall tractor models 544, 574, 674, Replaces International Casting number 3055049R, Engine D239, Cylinders: 4, Casting No. 3055049R, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 203926) $1350.01

No
Picture
Cylinder Head with Valves, Remanufactured, 3055367R - For International / Farmall tractor models 574, 585, 674, 2500A, Replaces International Casting number 3055367R, Casting No. 3055367R, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 205182) $1225.01

No
Picture
Cylinder Head - with Valves, Remanufactured, 398065R - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400, 3514 (all gas), Compatible with International Engine (s) C157, C175, C200, Replaces Casting number 398065R, 406790R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 207264) $1150.01

Drive Plate - 13" Hydro - For International / Farmall tractor models Hydro 84, 268, 454, 474, 574, 685, Compatible with International Construction and industrial models 2400A, 2500A, Replaces International OEM number 404078R91, Spline Count: 11, Spline Diameter: 1.200", (Item #: 169938) $220.00

No
Picture
Engine Block - Bare, Remanufactured, International C200, 397974R, 397924R - For International / Farmall tractor models 544, 574, 674, Compatible with International Engine (s) C200, Replaces Casting number 397974R, 397924R1, Our remanufactured bare blocks have been; cleaned, inspected, (Item #: 204850) $1100.01

No
Picture
Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.00

Flywheel - Flywheel assembly with ring gear. 12 inch diameter. Tractors: 574, 584, 585, 595, 684, 685, 695, 784, Hydro 84, 3230, 4210. Weight: 88.5 pounds. Additional $20 shipping due to weight. (Item #: 103897, Ref: 1808412C92) $593.00

Flywheel - With Ring Gear. For 574, 584, 595, 674, 684, 784, with D239 engine and 11 inch clutch. 126 teeth on ring gear. Replaces 3136044R42. (Item #: 103903, Ref: R2921) $460.00

Flywheel Ring Gear - The measurements on the Flywheel Ring Gear are: Inside Diameter 14.69 Inches, Outside Diameter 15.69 Inches, Teeth 159, Width 0.484 inches. This Flywheel Ring Gear is used on International models with C157. C175 and C200 Gas Engines. (Item #: 159140, Ref: 405861R1) $86.00

Flywheel With Ring Gear - For International / Farmall tractor models 574, 674, Compatible with International Construction and industrial models 2500A, 2500B, 2505B, Replaces Case IH OEM number 405862R11, Engine: C-200 (Gas), Additional Handling and Oversize Fees Apply To This Item, (Item #: 159142) $834.00

PTO Clutch Disc - For International / Farmall tractor models 454 (s/n 100000-earlier), 574 (s/n 100000-earlier), Compatible with International Construction and industrial models 2400A (s/n 100000-earlier), 2500A (s/n 100000-earlier), Replaces International OEM number 401717R1, (Item #: 155489) $15.50

Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90

Ring Gear - For 385, 395, 454, 464, 484, 485, 495, 574, 584, 595, 684, 685, 695, 784. Flywheel Ring Gear. 126 tooth, 15.93 inch outside diameter, 14.625 inch inside diameter, .562 inches wide. (Item #: 103898, Ref: 60883H) $49.50

Timing Gear Cover, Used - For International tractor models 574, 674, 2500, Compatible with International Construction and industrial models 3400, Compatible with International Engine(s) D239, Replaces International OEM nos 3136244R91, 3136057R14, Front, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436862) $295.01

Valve Guide - For tractor models 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 172721, Ref: 3055022R2) $3.98

Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70

Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $57.00

Valve Seal - This is a positive type valve seal used on International Diesel Engines. Replaces 3218398R91, 3218399R1, 3228677R91 (Item #: 128633) $2.70

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 2544, 474, 544, 574, 584, 585, 664, 674, 684. Contains: springs, guides, locks, (no valves). (Item #: VSKH239) $258.67

Valve Spring, Diesel - VALVE SPRING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, (706, 756, 786, 826, 886, HYDRO 86 all with D310 Diesel). (Item #: 173505, Ref: 3055060R1) $7.70

Valve Train Kit - For International / Farmall tractor models 544, 574, 584, 585, 664, 674, 684, 784, 785 (diesel), 884, 885, 2500, 2500A, 2500B, Engine (s): D206, D239, D246, D268, Includes: Intake Valves, Exhaust Valves, Valve Guides, Valve Springs, Valve Keepers, (Item #: 120318) $291.00

Engine Pistons and Sleeves

Piston Pin Bushing - PIN BUSHING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 128516, Ref: 3132018R2) $6.10

Sleeve Orings, Pair - Used with D179 CID Engine on: 454, 464, 484. Used with D206 CID Engine 474, 584, 585. Used with D239 CID Engine on: 2544, 544, 574, 664, 674, 684, 685, 724, 824. Used with D310 CID Engine on 2706, 2756, HYDRO 86, 686, 706, 756. Used with D358 CID Engine on: 2826, (3088 below serial number 121247), (3288 below serial number 111090), 786, 826. Inside Diameter: 4.331 inch (110.00 MM). Thickness 0.197 inch (5.00 MM) Replaces 3228344R1, 3055021R2, 3218603R1. (Item #: 179427, Ref: SRK724) $2.98

Engine Rings

No
Picture
Piston Ring Set - .030" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .030” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, For - .030" Oversize - Single Piston Ring Set use Item #: 120863, (Item #: 174308) $154.00

Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .030” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .030" Oversize - 6 Cylinder Piston Ring Set use Item #: 120865, (Item #: 120863) $29.60

No
Picture
Piston Ring Set - .040" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .040” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, For .040" Oversize - Single Cylinder Piston Rings use Item #: 120864, (Item #: 174310) $236.00

Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .040” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .040" Oversize - 6 Cylinder Piston Ring Set use Item #: 120865, (Item #: 120864) $45.40

No
Picture
Piston Ring Set - .060" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .060” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, Piston Ring Set - .060" Oversize - Single Cylinder use Item #: 120865, (Item #: 174312) $139.00

Piston Ring Set - .060" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .060” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .060" Oversize - 6 Cylinder use Item #: 120864, (Item #: 120865) $26.70

No
Picture
Piston Ring Set, Single Cylinder - Piston Ring Set. Keystone top ring. For 2544, 544, 574, 664, 674, 684 all with 239 CID 4 cylinder diesel, standard bore 3 7/8 inches. Contains 1 x 1/8 inch, 1 x 3/32 inch, 1 x 3/16 inch. Replaces 30-3090264, 3139594R91, G907224, G-907-224, 674309C92, 303090264. (Item #: 108178, Ref: PRS239D) $34.00

Piston Ring Set - Standard - 4 Cylinder - For International / Farmall tractor models 544, 574, Bore: 3.875", Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 128912) $181.00

No
Picture
Piston Ring Set - Standard - 4 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 2500A, 2500B, 2544, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, Bore: 3.8125", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold 4 Cylinder set, For Piston Ring Set - Standard - Single Cylinder use Item #: 120866, (Item #: 174306) $103.00

Exhaust System

Exhaust Elbow - This Exhaust Elbow is for tractor models 574, 584, 585, (595, 895 up to SN# JJE0014501), 674, 684, 685, 695, 784, 785, 884, 885. (Item #: 160787, Ref: 3136668R1) $114.00

Exhaust Elbow Gasket - For tractor models 474, 574, 584, 585, 595, 674, 684, 685, 695, 784, 785, 884, 885, 895, 3230, 4210, 4220, 4230. (Item #: 160788, Ref: 3136248R1) $3.30

Exhaust Manifold Gasket - Manifold to head, sold individually 4 required for application. For tractor models 474, 574, 584, 585, 595, 674, 684, 685, 695, 784, 785, 884, 885, 895, 3230, 4210, 4220, 4230. (Item #: 101558, Ref: 3132434R1) $3.70

$Farmall 574 Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome$
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Style: Curved, Inlet I.D.: 2-3/8", O.D.Pipe: 2-1/2", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115481) $165.88

$Farmall 574 Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome$
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number A29991, Style: Curved, Inlet I.D.: 2-3/8", O.D. Pipe: 4", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115486) $209.00

$Farmall 574 Exhaust Stack - 2-3\8 inch X 36 inch, Straight Chrome$
Exhaust Stack - 2-3/8" X 36", Straight Chrome - For International / Farmall tractor models Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number 62476D, Style: Straight, Inlet I.D.: 2-3/8", O.D. Pipe: 3", Length: 36", Chrome Plated, Eliminates Muffler, (Item #: 115487) $134.11

Manifold - Intake/exhaust manifold. For tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500 with C157, C175, C200 engines with gas updraft. Replaces 398071R1. Exhaust goes up, off-center, not on the end. Uses R0301G gasket set, not included. (Item #: 101557, Ref: 406046R1) $173.00

Manifold - For vertical exhaust. Models: 454, 464, 574, 674, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500 with C157, C175, C200 engines with gas updraft. Replaces OEM# 406046R1. Gasket set available. (Item #: 101557, Ref: R0301) $173.00

Manifold - For tractor models 474, 574, 584, 585, 595, 674, 684, 685, 695, 784, 785, 884, 885, 895, 3230, 4210, 4220, 4230. (Item #: 124679, Ref: 3136066R12) $186.00

Manifold Gasket Set - This Gasket Set is used with 406046R1 Manifold. (Item #: 108165, Ref: R0301G) $26.50

Muffler - Vertical Exhaust Inlet inside diameter 2 3/8 inch, outlet outside diameter 2 inch, overall length 30 inches. For International 454, 574, 674 Utility with C200 Gas or D239 Diesel Engines. OEM number use MC212 clamp, use R1800 rain cap. (Item #: 100821, Ref: R1657) $69.00

$Farmall 574 Muffler Eliminator - 2-3\8 inch X 24 inch, Straight Chrome$
Muffler Eliminator - 2-3/8" X 24", Straight Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Inlet I.D: 2-3/8", O.D. Pipe: 3", Length: 24", Straight Pipe, Chrome Plated, Eliminates Muffler, (Item #: 115491) $81.17

Muffler, Vertical - Black, 2-3/8 inch inlet, 2-3/8 inch outlet, 27 inches overall length. For tractor models UK series; 454, 474, 475, 574, 674. Replaces 529372R91, 529372R1, 529365R91 (Item #: 121133, Ref: 529372R91) $54.00

Muffler, Vertical - Oval body 4 inches by 8 inches dimension, 3 inches inlet length, 2-3/8 inch inlet I.D., 19 1/2 inch shell length, 23 1/5 inch outlet O.D., 2 inch outlet O.D., 46 inches overall length. For tractor models 784, 674, 884, 584, 385, 464, 684, 454, 484, 885, 2400, 574, 485, 585, 685, all built from 1982 with diesel engine. (Item #: 100285, Ref: 83207C1) $92.00

Fuel System / Air Intake

Air Cleaner Hose - For International / Farmall tractor models 454, 544, 574, 606, 656, 674, 706, 756, 766, 806, 826, 856, Compatible with International Construction and industrial models 2400, 2500, Replaces International OEM number 382400R1, A: 2.25", B: 2.50", (Item #: 163507) $13.50

Cable - Choke, 374217R92 - For International / Farmall tractor models 340, 574, 674 Replaces International OEM number 374217R92, , Compatible with Massey Ferguson Construction and industrial models 2500, Compatible with White Combine (s) 2500, Length: 46", (Item #: 161900) $16.00

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Farmall / International it fits: [ 2404, 2424, 2444, 2504, 2544, 2656, 330, 340, 404, 424, 444, 454, 464, 504, 544, 574, 656, 666, 674, 686 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ], [ 2826, 664, 826 (For diesel fuel shut off cable bracket) ], [ Industrial: 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3514, 4500A, 4500B, 8000 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ]; Replaces: 373373R1, 29-81, B110-10 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carbs used on: 464, 504, 544, 656, 574, 666, replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, 934SL, 974SL, TSX984SL. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA, 1 year warranty. (Item #: 100752, Ref: 14996) $475.00

Carburetor - With reversible linkage. This Zenith Style Carburetor outperforms the original carbs. Replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, TSX934SL, TSX974SL, TSX984SL. International part numbers 381945R93, 396737R93, 396738R92, 396966R91, 398069R91, 398069R92, 399355R93, 400348R91, 401379R91, 404731R91, 405530R91, 405869R94, 535134R91, 535135R91 Center to center on the 2 mounting bolts is 2 11/16 inches. 1 year warranty. (Item #: 183805, Ref: 14996B) $300.00

Carburetor Float - For tractor models 105, 203, 210, 230, 2500A, 2500B, 275, 375, 454, 464, 504, 544, 574, 656, 666, 686, HYDRO 70, HYDRO 86, ALL WITH MARVEL-SCHEBLER LARGE BOWL CARBURETORS. 381962R1 (Item #: 105095, Ref: R2383) $20.00

Carburetor Kit, Basic - Kit for Zenith 12758, 12685, 13384, 13396, 13588, 13716 carbs on 2504, 2544, 3514, 504, 544, 574, 666, 674, 686. (Item #: 100741, Ref: Z104) $24.20

Carburetor Kit, Basic - Kit for Marvel TSX934, TSX959, TSX857, TSX927, TSX974, TSX975 carbs used on 2544, 3514, 504, 544, 574, 656, 666, 674, 686. (Item #: 100734, Ref: MS102) $15.70

Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for Marvel-Schebler numbers: TSX943, TSX959, TSX984SL, TSX985SL. For International tractor models 2400A, 2400B, 2500A, 2500B, 3400A, 3500A, 3514, 444, 454, 464, 574 and 674. The kit contains all the parts shown. (Item #: 184326, Ref: R7893) $75.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX857, TSX484, TSX596, TSX925, TSX934, TSX959, TSX968, TSX980, TSX985. For the following tractor models: 504, 454, 544, 574, 674, 2400A, 2500A, 2500B. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203319, Ref: 1434-CARB) $390.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX939, TSX959, TSX984SL, TSX985. For the following tractor models: 464, 574, 674. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203327, Ref: 1444-CARB) $255.01

Carburetor Repair Kit - Basic repair kit for Marvel-Schebler carburetor. Fits carburetors: TSX939, TSX984SL, TSX985SL, TSX939, TSX984SL, TSX985SL.For tractor models: 454, 464, 574, 674, 2400A. 2500B. For combine 101, 103. For 101, 103, 2400A, 2400B, 2500A, 2500B, 454, 464, 574, 674. (Item #: 185585, Ref: BK318) $26.40

Fuel Bowl - CAV type fuel bowl. 3-5/8 inch outside diameter, 11/16 inch inside diameter screw hole. Used with diesel engines. For 105, 275, 375, 464, 484, 574, 584, 674, 684, 784, 884, HYDRO 84. (Item #: 112513, Ref: 3132197R1) $5.20

Fuel Bowl Glass - Fuel bowl, glass, 3-5/8 inch diameter, 3/8 inch bottom hole, for diesel engines. To engine serial number 120520. For 2400A, 454, 464, 484, 574, 584, 664, 674, 684, 784, HYDRO 84. (Item #: 107042, Ref: 3144478R1) $9.70

Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on International 105 Combines, 464, 484, 574, 584, 674, 784, Hydro 80. Replaces original part number 3122197R1, 3132197R91 (Item #: 112513, Ref: 1039071M1) $5.20

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.90

Fuel Filter, CAV type - Fuel filter for tractor models 2300, 2400, 2424, 2444, 248, 2500, 2500A, 258, 268, 3414, 3514, B414, 1294, 1394, 1494, 1594, 2350, 276, 278, 354, 364, 384, 385, 424, 433, 434, 444, 454, 484, 485, 533, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 784, 785, 833, 844, 884, 885, 201. Replaces: 1502155C91, 1966515C1, 3044506R93, 3144477R92, 796051R91, P143287. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

$Farmall 574 Fuel Filter \ Spin On$
Fuel Filter / Spin On - For tractor models 385, 454, 484, 544, 574, 664, 674, 684, 685XL, 686, 706, 756, 785, 786, 826, 884, Hydro 86, 2400, 2500, 3088, 3288. (Item #: 125844, Ref: 3132428R2) $18.50

Fuel Injector Nozzle Sleeve - This Fuel Injector Nozzle Sleeve is used on D155, D179, D206, D239, D246, D268, DT268, D310, and D358 Engines. Brass Construction, 3.190 inch overall length 0.386 inch injector tip inside diameter. Replaces 73055344, 3055344R1 (Item #: 165847, Ref: 3055344R1) $32.20

No
Picture
Fuel Injector, Remanufactured, 7735253R - For International / Farmall tractor models 464, 484, 485, 544, 574, 664, 674, 684, 685, 826, 2400A, 2826, Compatible with International Engine (s) D179, D239, D358, Replaces International OEM number 7735253R, 3055423, 3218251, 735253C91, Bosch KBL Ear (Y Shape) Body Style, (Item #: 211208) $125.01

Fuel Pump - Replaces B503521. For tractor models 1046 6 cylinder D358 diesel engine, 1056 6 cylinder D358 diesel engine with CAV pump, 454 D206 diesel engine (European Edition), 574 D239 diesel engine (European Edition), 674 D239 diesel engine (Europea Edition), 856 DT239 diesel engine, 946 6 cylinder D310 diesel engine. Replaces 3055375R93, 3132697R91, 3132697R92, B503521 (Item #: 153676, Ref: 3132697R92) $45.40

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be cork or rubber depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20

Fuel Sending Unit - For International / Farmall tractor models 454, 464, 574, 674, 2400, 2500, Replaces International OEM number 531974R2, (Item #: 119769) $67.00

Fuel Shutoff Valve - The threads on this fuel shutoff valve are 1/2 - 20 and 3/8 - 18 NPTF. Used on C50, C60, C70, C80, C90, C100, 385, 395, 485, 495, 585, 595, 685, 695, 785, 885, 895, 995, 3220, 3230, 4210, 4230, 4240, Hydro 84, 248, 258, 268, 278, 385, 454, 464, 474, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2400A, 2500, 2500A (Item #: 135040, Ref: 528926R1) $23.90

Fuel Solenoid - For International / Farmall tractor models Hydro 70, Hydro 86, 350, 444, 454, 464, 504, 544, 574, 666, 674, 686, 2400A, 2504, 2544, Compatible with International Construction and industrial models 2400A, 2504, 3400A, 3500A, 3514, Compatible with International Engine (s) C153, C175, C200, C291, Replaces International OEM number 386015R91, 396739R91, 396739R92, 396739R93, 530184R1, 71358C2, 71358C91, 71358C92., For Marvel Schebler carburetors only, not for International carburetors, (Item #: 111797) $175.00

Injector Nozzle - For tractor models 454, (464 up to serial number 027205 with nozzle number DLLA150S417), 544, 560, 574, 656, 660, 664, 674, 706, 786, 826, (886 serial number 14472 and up), 2544, 2656, 2706, 2826. (Item #: 179950, Ref: 3055428R92) $39.20

Manifold Heater - Thermostart Intake Manifold Heater Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: 218349A1, 162000090701, A77616, 3112805R91, K928523, 3118299R1 (Item #: 118792, Ref: 3583543M2) $11.80

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: 424 (late), 444 (late), 454, 504 (late), 544, 574, 656, 666, 674, 686. Replaces 392096R91. (Item #: 179751, Ref: C3NN9D532A) $6.50

Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 200, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces Replaces: 354222R91, 355142R91, 369988R91, 38465D, 51066DC, 61782C91. (Item #: 105370, Ref: 61782C91) $16.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50

Sediment Bowl Screen - For International / Farmall tractor models A, B, C, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 240, 340, 454, 460, 464, 504, 574, 606, 656, 674, 686, 2400A, 2404, 2500A, 2504, 2606, 2656, Compatible with International Hay Cutting (s) 201, 210, 230, 275, 375, 4000, 5000, 5500, Replaces International OEM number 49923D, Diameter: 2", Diameter Hole: 1/4", For Sediment Bowl Assembly use Item #: 105370, (Item #: 105371) $3.00

No
Picture
Throttle Friction Disc - This Throttle Friction Disc measures 0.165 of an inch thick, 1.960 inches outside diameter and has a center hole of 0.530 of an inch diameter. For models 240, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, 274, 284, 340, 3444, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884 and Hydro 84. Also replaces 388632R1, 394716R1 and 399168R1. (Item #: 178163, Ref: 369463R1) $7.40

Throttle Knob - For tractor models 384, 454, 464, 544, 574, 656, 664, 666, 674, 686, 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 2400, 2500, 2544, 2656, 2756, 2826, 2856, 3110, 4366, (4386, 4568, 4786 4WD), Hydro 70, Hydro 86, Hydro 100. (Item #: 111041, Ref: 397931R2) $6.80

Gauges

Ammeter Assembly - (30-0-30) 2 inch body diameter. Replaces, 393334R91, 354473R91, 360053R91, 378424R91, 536229R1. For tractor models 140 serial number 57724>, 2400A, 2500A, 454, 464, 574, 674, Cub serial number 248125>, Cub 184. (Item #: 121632, Ref: A0NN10670A) $7.10

No
Picture
Tachometer Cable - This cable is for gas models. The cable is 38 inches total length. For tractor models 2400, 454, 464, 574, 674 all with gas engines. (Item #: 121525, Ref: 529795R92) $48.80

No
Picture
Tachometer Cable - This tachometer cable is 58 3/8 inches long for models: Hydro 84, 3514 with C175 gas, (385, 484, 485, 584, 684, 784, 785, 884 all without cab), (666, 686, 706, 756, 766 806, 826, 856 all with gas), 544 rowcrop with gas, 656 gas or diesel, (hydros 2400, 2500, 454, 464, 574, (585, 685, 885 without cab. Replaces 393326R92, 529234R1. (Item #: 111325, Ref: 384843R91) $27.74

Tachometer Drive Gear Assembly - This Tachometer Drive Gear Assembly has 13 Teeth and is 1.765 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368245R12, 368245R11, 178575H1 (Item #: 164574, Ref: 368245R11) $64.58

Tachometer Drive Housing Fitting - This Tachometer Drive Housing Fitting is 3/4 inch - 20 pipe thread to 7/8 inch - 18 thread, 1.407 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368246R1, 178309H1 (Item #: 164575, Ref: 368246R1) $24.85

Tachometer Gauge, Remanufactured, 66455C1 - For International / Farmall tractor models 454, 464, 484, 574 (s/n 100001-later), 584, 674, 684, 784, 884, 2400A (s/n 100001-later), 2500A (s/n 100001-later), Replaces International OEM number 66455C1, (Item #: 204000) $158.01

Temperature Sender - This water temperature sending unit is used on International 1970 - 1985; 74 Series: 354, 374, 444, 454, 474, 574, 674. 84 Series: 384, 484, 584, 684, 784, 884. 85 Series: 385, 485, 585, 685, 785, 885, 985. International pre 1970: 276, 434, 444. It replaces 3073787r1, 3127956R1, 709280R91 (Item #: 155914, Ref: 3127956R1) $14.00

Tractometer - This Tractometer fit most gas and diesel models 454, 464, 574 Hydro, 674, 484, 584, 684, 784, 884, 885, 2400, 2500A Hydro (serial number 100001 and below). S61427 Tractometer replaces 66455C1, 3121926R91, 3125106R92. (Item #: 110414, Ref: 66455C1) $46.50

Water Temperature Gauge - This Water Temperature Gauge is used on: International 1970 - 1985; 74 Series: 354, 374, 444, 454, 474, 574, 674. 84 Series: 384, 484, 584, 684, 784, 884. 85 Series: 385, 485, 585, 685, 785, 885, 985. International pre 1970: 276, 434, 444. Replaces 3127959R3, 3127959R4, 709280R91. Does not include sender. Use 3127956R1 sending unit if needed. (Item #: 113474, Ref: 3127959R3) $34.50

Hitch / Drawbar

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50

Leveling Box Assembly - 22-3/4 inch minimum length, 28 inch maximum, spacing between fork is 1 inch. Catagory 1. For tractor models 474, 475, 574, 584, 674, 684, 784, 884. (Item #: 184602, Ref: S.14874) $187.50

Leveling Box Assembly, RH, Cat I - For tractor models 454, 464, 484, 485, 495, 574, 584, 585, 595, 674, 684, 784, 884. Measures 23 3/4 inch minimum, 28 inch maximum, 1 7/8 inch gap in yoke for thick lift arm. (Item #: 180468, Ref: 223320) $178.75

Leveling Box Fork - This Leveling Box Fork is 14.50 inches long, has a 1-5/8 inch fork width and 0.875 inside diameter. This is a CAT II part. It is used on 3220, 3230, 395, 4210, 4230, 4240, 495, 574, 584 Indust/Const, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995. It is used with 527937R1 Nut, not included. Replaces 402635R4. (Item #: 110393, Ref: 402635R4) $74.00

Leveling Fork Nut - This Leveling Fork Nut is used with 3121964R1 and 402635R4 fork. Replaces original part number 527937R1. (Item #: 110735, Ref: 527937R1) $7.00

Leveling Link Assembly, Cat II - This Leveling Link Assembly Cat II is for tractor models 574, 584, 585, 595, 674, 685, 695, 785, 884, Hydro 84. All with telescopic arm. Consists of: (1) A-527948 lift rod, (1) A-704207R3 swivel, (1) A-3069069R1 pin, (1) A-402635R4 housing, (1) A-527937R1 nut. (Item #: 124553, Ref: 223319) $88.00

Leveling Rod Fork - Housing, leveling screw. Cat I. (14.500 inches long) 1 inch wide fork. Tractors: Hydro 84, 385, 395, 454, 464, 484, 485, 495, 574, 584, 585, 595 with fixed lower link, 674, 684, 685 with fixed lower link, 695, 784 with fixed lower link, 895, 995 ; 3220, 3230 with out telescopic lower link; 4210, 4230, 4240 with out telescopic lower link. (Item #: 108812, Ref: 3121964R91) $56.00

Leveling Screw Bearing - For International / Farmall tractor models B414, Hydro 84, 354, 384, 385, 424, 454, 464, 484, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, Compatible with International Construction and industrial models 2300A, 2400, 2424, 2444, 2500, Replaces International OEM number 3069064R1, (Item #: 124568) $40.00

Leveling Yoke Left Hand - This Left Hand Leveling Yoke is 19.250 inches long and 0.875 inch, 9 UNC thread. It replaces original part numbers 527935R1, 527948R91 (Item #: 124678, Ref: 527948R91) $33.10

Lift Yoke Assembly, LH, Cat I - For tractor models 574, 585, 595, 674, 684, 685, 695, 784, 884, Hydro 84 all with fixed arms. (Item #: 124552, Ref: 223318) $88.00

Hydraulic System

Filter, Hydraulic Oil - 5 inch outside diameter, 1-15/16 inch inside diameter, 3 inches tall. For tractor models (454, 574 syncromesh), 464, 574, 484, 584, 684, 784, 884, 385. (Item #: 110865, Ref: 530144R92) $17.70

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $14.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.10

Light Switch, 12 Volt - For tractor models (Cub serial number 224401 to 227700), (Cub Lo-Boy serial number 18701 to 21575), (140 from serial number 26801 and up), 1206, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, 354, 404, 424, 444, 454, 464, 504, 574, 606, 674, 706, 806, 1256, 2300, 2400A, 2404, 2424, 2444, 2500A, 2504, 2606, 21256, 3444, 4100, 4156, 403. (Item #: 125705, Ref: 376851R91) $30.20

Rotary Light Switch - The outside diameter thread is 0.685 inches on this 6 spade terminal rotary switch. It is used on International models: Hydro 84, Hydro 86, Hydro 186, 140, 464, 574, 674, 384, 385, 484, 584, 684, 686, 4568, 784, 786, 884, 886, 986, 1086, 1486, 1586, 4186. Replaces 107200C1, 107200C2, 1-1288, IHS3234 (Item #: 153433, Ref: 107200C2) $34.20

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.00

Sealed Beam Bulb 12V - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $26.80

Switch, Light - Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908).376851R92 (Item #: 125705, Ref: 376851R91) $30.20

Miscellaneous

No
Picture
Hydraulic Pump, 18 GPM - For International / Farmall tractor models 454, 574, Compatible with International Construction and industrial models 2400, 2500, Replaces International OEM number 544708R92, (Item #: 171563) $694.00

Pilot Relief Valve - For International / Farmall tractor models Hydro 100, 454, 574, 656, 766, 806, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 2400A, 2500A, 2656, 2806, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Replaces International OEM number 388208R93, 388208R91, 388208R92, 2000 psi, (Item #: 154338) $178.00

Pilot Relief Valve, Used - For International tractor models Hydro 100, 454, 574, 656, 766, 856, 966, 1026, 1066, 1456, 1466, 1468, 2400, 2500, 2656, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 388208R93, 2000 PSI, For a new version of this item use Item #: 154338, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498628) $113.71

Oil System

Engine Oil Pan, Used - For International tractor models Hydro 84, 248 (s/n 18000-later), 258, 268, 278, 574, 584, 585, 674, 684, 685, 784, 785, 2500A, Compatible with International Engine(s) D206, D239, D246, D268, Replaces International OEM nos 3136055R94, 3136055R95, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436863) $540.01

Oil Filter Spin On - Oil filter element, spin-on type. Approc, diameter 5.37 inch height, 3.68 inch outside diameter. For gas engines: C157, C175, C200, C291. For diesel engines: D179, D209, D236, D239, D246, D310, D358. For 2544, 2706, 2756, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 826, 886, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 124840, Ref: 3136046R93) $10.10

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60

Oil Pressure Switch - For tractor models Cub 154, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2400A, 2500A, 2706, 2756, 2826, 2856, 3388, 3588, 3788, 385, 454, 464, 484, 485, 574, 584, 6388, 6588, 674, 6788, 684, 716, 756, 766, 784, 786, 806, 826, 856, 884, 966, 986, Hydro 100, Cub 185 Lo-Boy. (Item #: 124745, Ref: 3129031R91) $14.80

Oil Pump - For tractor models 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 2544, 3400A, 3500A, 3514, 4500, 454, 464, 544, 574, 674 For C157, C175 and C200 Gas Engines. Replaces 398073R93 (Item #: 128684, Ref: 601-1129) $356.00

No
Picture
Oil Pump Assembly, Pump Center - 1.175 inch suitable for 4 cylinder applications. For tractor models with D239 Engine: (UK series 258, 268, 288, 474, 574, 674, 584, 684, 784, 884, 585, 585XL, 685, 685XL, 785, 785XL, 885, 885XL, 595, 595XL, 695, 695XL, 795, 795XL, 895, 895XL, 995XL, 3230, 4210, 4220, 4230, 4240, 84), (Hydro European 624, 654, 724, 824, 733, 833, 740, 840, 940, 644, 744, 844, 844S, 844XL, 743, 743XL, 745S, 745XL, 845, 845XL). (Item #: 112409, Ref: 3136430R95) $227.00

PTO / Driveline

Ball Bearing - Bearing has multiple applications for Farmall and IH tractors including 1-1/8 inch PTO output shaft bearing, forward and reverser clutch shaft bearing, a transmission countershaft rear bearing, a transmission input shaft bearing. Measures 1.181 inch inside diameter, 2.440 outside diameter. and 0.629 wide. Replaces: 112028R91, 116753A1, 210064, 23874D, 3100294R91, 3160416R91, 3174392R91, 3177807R1, 42842VA, 610020C91, 703980R91, 703981R91, 704771R91, 704771R92, 758352R91, 758354R91, 84004469, ST212, ST213, ST213T, ST429 (Item #: 180397, Ref: 9N715BC) $6.10

Independent PTO Clutch Kit - Kit includes 4 friction plates, 6 steel, 6 springs, 2 piston seals. For tractor models 454, 574, 2400, (2500 up to serial number 100000). Replaces 534934R91, 534934R92, 534934R1, 401723R1, 401724R1, 401715R1 (Item #: 172830, Ref: 534934R92) $98.00

No
Picture
PTO SHAFT - For 2400A, 2500A, 454, 464, 484, 574, 674, 884 serial number below 6377, 584 serial number below 6804, 784 serial number below 7826, 684 serial number below 6844. PTO Shaft 540 RPM. 27 Front Splines. 9.6 inches long. (Item #: 124727, Ref: 3113017R1) $104.00

No
Picture
PTO Shaft 540 RPM, Used - For International tractor models Hydro 84, 454 (s/n 8078-later), 464, 484, 574, 584 (s/n 6804-earlier), 674, 684 (s/n 6844-earlier), 784 (s/n 6826-earlier), 884 (s/n 6377-earlier), Compatible with International Construction and industrial models 2400A (s/n 692-later), 2500A, Replaces International OEM number 3113017R1, Front Spline: 27, Length: 9.600", For a new version of this item use Item #: 124727, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435855) $91.01

No
Picture
PTO Shaft Seal Kit - For tractor models 454, 464, 484, 574, 584, 674, 684. BEARING AND SEAL KIT FITS: 71230 IPTO SHAFT; FRONT SEAL DIAMETER 1.750 inch; REAR SEAL DIAMETER 1.625 inch. KIT INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO SEAL AND REAR SEAL. (Item #: 179493, Ref: R3593) $90.00

Seats

Lower Back Seat Bracket Set, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 574, 606 (With Vertical Action), 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (With Vertical Action), 1206, 1256, 1456, 1466 (With Vertical Action), 1468 (With Vertical Action), 1566, 1568, 1586, 2656, 2706 (s/n 3000-later), 2756, 2806, 2826, 2856, 4156, 4166, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 715, 815, 915, Compatible with International Hay Cutting(s) 375, Compatible with International Rake / Tedder(s) 100, Replaces International OEM number 387172R1, 387173R1, Includes 2 Brackets, For a new version of this item use Item #: 112241, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412241) $24.76

Seat Bracket Set - Heavy gauge powder coated steel mounting brackets specifically designed for our IH6012 replacement cushion set. This bracket set replaces part numbers 387172R1, 387173R1, 387178R1. Hardware included. (Item #: 101255, Ref: IH6013) $58.00

Seat Cushion Set - Black and white leatherette upholstery. Kit contains seat, lower and upper backrest. For tractor models 70, 86, 504, 544RC, 574, 606, 656 before serial number 14500, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504, 2706, 2756, 4100, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $140.00

No
Picture
Seat Mounting Bracket - ADAPTER PLATE, FOR MOUNTING TISCO BRAND TS SERIES ADJUSTABLE BASE SUSPENSION SEATS ON INTERNATIONAL TRACTORS: HYDRO 84, 454, 464, 574, 674, 584, 684, 784. For 454, 464, 484, 574, 584, 674, 684, 784, HYDRO 84 (Item #: TS424SB) $43.19

Seat Mounting Plate - This plate adapts most grammer style seats to fit Models: 454, 464, 574, 584, 585, 674, 684, 685, 784, 785, 885. Note: this mounting plate is not original. This will adapt all seats in A&I seat catalog number CT548 pages 5, 6, 7 and 8. (Item #: 172991, Ref: SMP100) $70.00

Sheet Metal / Body Parts

No
Picture
Battery Door, Metal - This Battery Door is 20-3/8 inches long by 15 3/8 inches wide. It is metal and replaces original fiberglass. It is used on 2500 (Industrial), 454, 464, 574, 674, Industrial: 2400; Replaces: 3113425R1, 401933R1 (Item #: 104333, Ref: 401933R1) $122.08

Fender Handle Grommet - Outside diameter 5.750 inch x 2.750 inch, inside diameter 4.500 inch x 1.500 inch. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574 series A, 656, 66, 666, 674, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2500 series A, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256. Replaces 235700A1, 388940R1.235700A2 (Item #: 103959, Ref: R20759) $9.00

Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $215.00

Grill - This front grill fits the following tractor models: 354, 364, 454, 464, 574, 674, 2300A, 2400A, and 2500A. It comes with the top hold in pins and springs. Please note that this grill is plastic. (Item #: 104332, Ref: 537496R1) $135.00

Lower Grille Panel - For International / Farmall tractor models 574, 674, 2500A, Compatible with International Construction and industrial models 2500A, Replaces International OEM number 402427R1, 6-9/16" tall x 16-7/16" long, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 107833) $47.08

Steering

Bushing, Front Axle Steering Arm - For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. Replaces 153687C1. (Item #: 104494, Ref: 405574R1) $6.80

Bushing, Front Axle, Steering Arm - Associated with 379555R11 steering arm. For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. (Item #: 104493, Ref: 379748R1) $9.00

Front Axle Bolt - Used to secure front axle knees, this bolt measures 4-3/4 inches overall, 4 inches to the shoulder and has 3/4-16 UNF RH Thread. If nuts are needed, order 116643. Replaces part number 405584R1 (Item #: 124558) $9.90

Front Axle Knee, Left Side - Used on the following with Swept Back Axles: 2500A, 385, 395, 484, 485, 495, 584, 585, 595, 685, 695, 885, 895, 995, 574. This Front Axle Knee measures 9.500 inches from the top of the thrust bearing to the top of the tube. Comes with 358958R2 bushing. If thrust bearing is needed, order 185106C1. Replaces 66701C91, 405712R12 (Item #: 110733, Ref: 405712R12) $532.00

Front Axle Knee, Right Side - Used on the following with Swept Back Axles: 2500A, 385, 395, 484, 485, 495, 584, 585, 595, 685, 695, 885, 895, 995, 574. This Front Axle Knee measures 9.500 inches from the top of the thrust bearing to the top of the tube. Comes with 358958R2 bushing. If thrust bearing is needed, order 185106C1. Replaces 405713R12, 66702C91 (Item #: 108890, Ref: 405713R12) $526.00

Front Axle Nut - Used with part number 124558 to secure axle knees, this nut is 3/4 inch -16 UNF thread. Replaces 405576R1 (Item #: 116643) $2.50

Power Steering Clevis End - This Power Steering Clevis End has a pin hole of 20 MM (.787 inches) and fits cylinder 188842A1. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 549670R2. (Item #: 113280, Ref: 3125306R1) $43.80

Power Steering Cylinder - Complete cylinder with 1 inch diameter shaft. Includes 549670R2 Clevis. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 400587R1, 549667R91, 549667R93, 188842A1, 549667R92, 84336125. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 104583, Ref: 188842A1) $270.00

Power Steering Cylinder Rod - Used on UK built International 2 wheel drive tractors, this part replaces 549668R1, 549668R2, 188851A1, 549668R3, 188854A1. Used on 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84, Hydro 86, MX100C, MX80C, MX90C (Item #: 182916, Ref: 549668R1) $292.00

Power Steering Motor - For International / Farmall tractor models Hydro 100, 454, 464, 574, 674, 766, 966, 1066, 1466, 1468, 1566, 1568 Replaces International OEM number 70110C94, 70111C93, 534852R92, 534994R92, 535231R92, , Compatible with Massey Ferguson tractor models 30, 230, 245, 265, Compatible with Massey Ferguson Construction and industrial models 20C, 30B, 40B, Replaces Massey Ferguson OEM number 544387M93, 544387M91, Shaft is splined with threads, The ports are approximately 45 degrees from the original equipment, For a Remanufactured version of this sku use Item #: 204158, (Item #: 104260) $1149.01

No
Picture
Ring Gear and Pinion Set, Used - For International tractor models 454, 464, 474, 574, 2400A, 2500A, Replaces International OEM nos 65255C1, Teeth: 14 and 51, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434281) $710.01

Seal Kit, Power Steering Cylinder - For 2 wheel drive models 454, 464, 574, 674, 484, 584, 684, 784, 884, 385, 485, 585, 685, 885, 595, 695, 995, 2400, C50, C60, C80, C90, C100, 4210, 4230, 4240. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 115098, Ref: 55355C91) $39.60

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80

Spindle Felt Seal - This Felt Washer is used with 405840R12 and 534288R91 Spindles. Fits tractor models 238, 248, 258, 385, 395, 454, 475, 474, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 685, 695, 885, 895, 3220, 3230, 4210, 4230 and 4240. (Item #: 102176, Ref: 15943DA) $2.30

Spindle, Left or Right Side - Used on the left or right hand side, the shaft diameter is 1.67 inches. The shaft length is 12.25 inches. Uses; WBKIH6 wheel bearing kit, 185106C1 thrust bearing, 358958R2 bushing, and 406294R21 hub. (Item #: 100844, Ref: 405840R11) $227.00

$Farmall 574 Spindle, L\R$
Spindle, L/R - This spindle works both Left hand and right hand. Shaft length 12.125 inch, shaft diameter 1.687 inch, inner bearing 1.375 inch, outer bearing .842 inch. For models 238, 248, 258, 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 685, 695, 885, 895, 3220, 3230, 4210, 4230, 4240, C50, C60. The wheel bearing kit used for this spindle is part number WBKIH6. (Item #: 100844, Ref: 405840R12) $227.00

$Farmall 574 Spindle, L\R$
Spindle, L/R - This spindle replaces both Right hand and left hand. 15.265 inches in length, A=1.687 inch, B=1.375 inch, C=.843 inch, .75 inch UNF thread. For tractor models 238, 248, 258, 454, 474, 475, 574, 674, 484, 584, 385, 485, 485XL, 585, 585XL, 395, 495, 595, 595XL. The wheel bearing kit used for this spindle is part number WBKIH6. (Item #: 100845, Ref: 527292R92) $253.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N, 129-290, 88886, 427639, 88886 (Item #: 156038, Ref: 387930S36) $1.10

$Farmall 574 Spindle, RH\LH$
Spindle, RH/LH - Has a shaft length of 9.50 inch, width 1.667 inch, inner bearing 1.375 inch, outer bearing .843 inch. For tractor models 2400A, 2500A, 380B, 385, 395, 454, 484, 485, 495, 574, 584, 585, 595, 595XL. The wheel bearing kit used for this spindle is part number WBKIH6. (Item #: 104326, Ref: 534288R91) $227.00

$Farmall 574 Spindle - RH \ LH, Used$
Spindle - RH / LH, Used - For International tractor models 574, 585, 674, 2500A (Utility with row crop axle), Replaces International OEM number 527292R92, Right or Left Side, Dimension A: 15.250", Dimension B: 1.667", Dimension C: 1.375", Dimension D: .842", For a new version of this item use Item #: 100845, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400845) $154.01

Steering Arm Assembly - For International / Farmall tractor models Hydro 84, 258, 268, 278, 385, 454, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 67499C91, (Item #: 158746) $740.00

Steering Bar Assembly - For tractor models 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 84 Hydro, 884, 885, 885XL, 895, 895XL, 995XL. (Item #: 124616, Ref: 405580R11) $40.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $40.00

Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $52.00

Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.40

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $63.00

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $70.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Thrust Bearing - Fits Models: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 1822, 1844, 2022, 2044, 21026, 2400A, 2500A, 2656, 2706, 2756, 2826, 2856, 300, 3088, 3288, 350, 3688, 380B, 385, 395, 400, 450, 454, 484, 485, 495, 504, 5088, 5288, 544, 5488, 560, 574, 584, 585, 595, 595XL, 656, 66, 666, 674 with STRAIGHT AXLE. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Tie Rod - Short tie rod, 3.062 inches long, .687 inch diameter, 18 right hand thread. For 2400A, 2500A, 385, 484, 485, 574, 584, 674, 784, 884, HYDRO 84. (Item #: 100863, Ref: 527658R91) $21.10

Tie Rod - Tie rod end, outer, notched {7}, 15 inches to center of post, .750 inch diameter. For tractor models 2400A, 2500A, 385, 484, 485, 574, 584, 674, 684, 784, 884, HYDRO 84. (Item #: 100871, Ref: 65079C91) $32.30

Tie Rod - Front axle tie rod parts. Tie rod end, outer, notched {7}, 15-7/8 inches to center of post. Used on tie rod assemblies with notched outer end and threaded inner end. For swept back adjustable axles 48 inches to 80 inches on tractors: 385, 484 with 1-11/16 inch outside diameter. For 2400A, 2500A, 385, 484, 485, 574, 584. (Item #: 100862, Ref: 65082C91) $30.10

Tie Rod Assembly - This Tie Rod Assembly is used on Adjustable Straight Axles (52 Inches to 82 Inches Tread Width). It Replaces 3125171R2, 3125171R3, 1332805C2, 3116406R3, 3116406R4, 3116406R5, 3116321R93, 1538016C1. (Item #: 156878, Ref: 1538016C1) $131.18

Tie Rod Assembly, Complete - Due To Multiple OEM Styles, Individual Pieces May Not Fit Models Listed, But Can Use Assembly As A Replacement. Assembly Consist Of: (1) 65079C91, (1) 527658R91, (1) 67529C1, (1) 390686R1, (1) 43747D. 65079C91: Stud Taper= .606 To .700 inches, 527658R91: Stud Taper= .606 To .700 inches. Used on 574, 2400A Straight Front Axle serial number 100006 and up, 2500A Straight Front Axle serial number 100004 and up, 385 Straight Front Axle, 454 Straight Front Axle serial number 100006 and up, 484, 485, 495 Straight Front Axle, 584 Adjustable Straight Front Axle, 585, 595 Adjustable Straight Front Axle, 674 Straight Front Axle, 684, 695 Adjustable Straight Front Axle, 784, 884, 885 below serial number 3083. (Item #: 124766, Ref: 223326) $125.00

Tie Rod Assembly, Complete - Due To Multiple OEM Styles, Individual Pieces May Not Fit Models Listed, But Can Use Assembly As A Replacement. Assembly Consists Of: (1) 65082C91, (1) 527658R91, (1) 527659R2, (1) 390686R1 and (1) 43747D. 65082C91: Stud Taper = .606 To .700 inches, 527658R91: Stud Taper = .606 To .700 inches. Used on 574, 2400A, 385, 485, 495, 584, 595, 695. (Item #: 124765, Ref: 223324) $148.00

Tie Rod Clamp - Used on Farmall / IH models, this tie rod clamp fits 574, AV, AV1, A1, CUB, SUPER A, 100, 130, 140, 200, 230, 240, 2400, 248, 2500, 2504, 258, 3230, 340, 385, 404, 4210, 4230, 4240, 454, 474, 484, 485, 504, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 995 (Item #: 104368, Ref: 43747D) $17.50

Tie Rod End - Dimension A= 4.060 inch, B= 0.812 inch (16 UN right hand thread). Fits the following tractors with ADJUSTABLE CAST I-BEAM FRONT AXLE: Hydro 84, 454, 484, 485, 495, 544, 574, 585, 595, 595XL, 656, 684, 685, 695.YTO-379327R91_. (Item #: 104406, Ref: 379327R91_) $25.90

Tie Rod End - Used on the following with non-adjusting Cast I Beam front axles: 574, 2400A, 2500A, 2544, 2656, 380B, HYDRO 84, 454, 484, 485, 495, 544, 584, 585, 595, 595XL, 656, 684, 685, 685XL, 784, 884, 885, 885XL, 895, 895XL. A= 4.00 inch, B= 13/16 inch, 16 left hand thread. Replaces 379326R91 (Item #: 104593, Ref: C5NN3A300C) $25.40

Tie Rod Tube - Measuring 16.440 inches long with a 1 inch outside diameter, this Tie Rod Tube is used the following tractors with swept back axles: 574, 2400A 56-76 inch tread, 2500A with 56-76 inch tread, 385 with 48-80 inch tread, 454 with 48-80 inch tread, 464 with 48-80 inch tread, 484, 485, 584, 585. (Item #: 104407, Ref: 527659R2) $52.00

Tie Rod Tube - Used with straight axles only, this tie rod tube measures 16.190 inches long, 1 inch outside diameter. Used on 574, 2400A serial number 100000 and up, 2500A serial number 100000 and up, 385, 454 serial number 100000 and up, 484, 485, 584, 585, 674, 684, 784, 884. (Item #: 104408, Ref: 67529C1) $40.00

Wheels

Front Wheel Hub, 6 Bolt - For tractor models 2400A, 2500A, 380B, 385, 395, 454, 484, 485, 495, 574, 584, 585, 595, 595XL, 674, 685, 685XL, 695, 695XL, 885, 895, 995. Note: hub uses WBKIH6 wheel bearing kit. Replaces 406294R21, 406294R11 (Item #: 104503, Ref: 406294R21) $160.00

Front Wheel Hub, Heavy Duty - 6 bolt. For tractor models 268, 278, 3230, 4210, 4230, 4240, 574, 584, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784, 785, 884, 885, 885XL, 895, 895XL, 995, C100, C70, C80, C90, CX100, CX70, CX80, CX90, Hydro 84. (Item #: 124067, Ref: 67527C91) $136.00

Hub Cap - This Hub Cap is used with hubs: 67527C91, 406294R21, 406292R11, 536058R11. It is 2.5 inches in diameter. It replaces 612884R1, 47468696. (Item #: 115100, Ref: 612884R1) $5.10

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 703929R1. (Item #: 184824, Ref: 350719KIT) $23.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 365326R1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Wheel 12X28 - Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For tractors: 424, 434, 444, 454, 464, 484, 574, 584, 606, 674, 684, 784, 884 and others using 12 inches x 28 inches 4 rail spin out rims. International Utility: 300, 330, 340, 350, 404, 460, 504 and others using 12 inches x 28 inches 4 rail spin out rims. Replaces: 365324R92. Additional $25 due to weight. (Item #: 103722, Ref: 1687615M91) $480.00

Wheel Bearing Kit - Complete for one wheel. For tractor models 574, 584, 585, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 884, 885, 885XL, 895, 895XL, Hydro 84. Kit contains: LM102949 (Cone), LM102910 (Cup), L68149 (Cone), L68111 (Cup), 22322 (Lip Seal), 67328C1 (Retainer). (Item #: 100858, Ref: WBKIH9) $36.20

Wheel Bearing Kit - For tractor models 2400A, 2500A, 380B, 385, 395, 454, 484, 495, 574, 584, 585, 595, 595XL, 674, 685, 685XL, 695, 695XL, 784. Kit contains: LM48548 (Cone), LM48510 (Cup), M12649 (Cone), M12610 (Cup), 530104R91 (Seal), 406295R1 (Retainer-NOT SHOWN). (Item #: 100857, Ref: WBKIH6) $35.50

No
Picture
Wheel Bearing Kit - Kit contains 1 of each of the following bearing LM67048, bearing LM67010, bearing LM11949, bearing cup LM11910, seal 530103R91, seal retainer ring 406293R1. For tractor models 454, 574, 584, 674, 2400A. (Item #: 112386, Ref: WBKIH7) $22.60

No
Picture
Wheel Bearing Kit - Kit contains 1 of each of the following L68149 bearing, L68111 bearing, LM12749 bearing, LM12711 bearing cup, 530103R91 seal, 406293R1 seal retainer ring. For tractor models (2400A, 484 std duty axle), 454, 464, (574 straight axle). (Item #: 104388, Ref: WBKIH8) $31.50

Wheel Bolt - This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, and 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D. (Item #: 108605, Ref: WB916) $2.30

Wheel Hub, Front - Used on IH models 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 884, 885, 885XL, 895, 895XL, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84, Hydro 86, MX100C, MX80C, MX90C this Front Hub replaces OEM number 67527C92, 67527C91. Uses Wheel Bearing Kit WBKIH6 (Item #: 124067, Ref: 67527C92) $136.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.60

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $16.90

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.30

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.80

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.10

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $29.70

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $35.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.50

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.80

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $13.80

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.30

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.10

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.10

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.40

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $13.80

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $24.80

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.20

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.10

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.10

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.40

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $13.60

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.20

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70

$Farmall 574 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Farmall 574 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Farmall 574 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall 574 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Farmall 574 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Farmall 574 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Farmall 574 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

$Farmall 574 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $373.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $444.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $444.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $42.20

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $40.80

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $40.00

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $57.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.10

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.40

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $13.98

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $37.70

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00