International Harvester / Farmall 656 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Accessories / Supplies
Engine Block Heater - Frost plug heater with cord. 600 watt, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Replaces 407046R92. Cord is 12 inches long. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D. For 2504, 2806, 315, 340, 403, 453, 460, 503, 504, 560, 606, 615, 656, 660, 706, 715, 806. (Item #: 120027, Ref: 106725A1) $43.00

Belts
No Picture Belt - Fan - For International / Farmall tractor models 460, 560, 606 (s/n 12799-13949), 656, 660, 706 (s/n 49664-earlier), 706 (s/n 49664-later), Replaces OEM number 385738R1, Replaces Case IH OEM number 316250R1, Color: Black, Length: 49.3, Material: Polyester Cord, Thickness: 0.373, Width: 1/2, Type: REC (Raw Edge Cogged), (Item #: 123126) $8.70
Belt - Generator / Water Pump - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Alternator), Compatible with International Combine (s) 715, Replaces International OEM number 403617R1, All gas engines, (Item #: 123133) $14.87

Brakes
Brake Actuating Assembly, Used - For International tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391446R91, For a new version of this item use Item #: 105442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405442) $97.01
Brake Actuating Spring - Used with disc brakes. For tractor models (M from serial number 294226 and up), (MD from serial number 285505 and up), Super M, Super MTA, Super MV, Super MDV, Super W6, Super W6TA, Super WD6, OS6, ODS6, 400, 450, W400, W450, 560, 656, 660, 664, 666, 686, Hydro 70, Hydro 86. Replaces A30897, A41816. Replaces 357116R1, 619731C1, 72504717V. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Item #: 113798, Ref: A155624) $1.70
Brake Actuator Assembly - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391446R91, (Item #: 105442) $170.00
No Picture Brake Disc - use 1975463c2 (Item #: 105449, Ref: 1975463C3) $20.50
Brake Disc - 6.50 inch outside diameter, 3.50 inch inside diameter, 1.84 inch spline diameter, 10 spline. For tractor models 2656, 656, 664, 666, 686, Hydro 70, Hydro 86. Replaces 391445R91, 1975463C3. (Item #: 105449, Ref: 1975463C2) $20.50
Brake Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391445, 830617, 619731, Kit Includes 2 Brake Discs, 5 Steel Balls, 3 Brake Springs, (Item #: 162744) $69.00
No Picture Brake Operating Rod and Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 330, 340 (Farmall and International), 460 (Farmall and International), 504 (Farmall and International), 544 (Farmall and International), 606 (gas), 656 (Farmall and International), 664, 666 (gear drive), 686 (gear drive), 2504, 2544 (diesel), 2606 (diesel), 2656 (diesel), Replaces International OEM number 403840R2, 368297R1, 403840R1, 368297R11, 388271R1, (Item #: 111363) $116.00
Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $13.20
Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $14.80
Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00
Disc Brake Boot - For tractor models 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 70, Hydro 86, 2544, 2606, 2656. (Item #: 112346, Ref: 368299R1) $9.30

Clutch
Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $6.90
No Picture Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-3/4 inch 16 spline, 13/16 inch pilot. For tractor models 300, 330, 340, 350, 504, 544, 606, 656, 2500, 2504, 2544, 2606, 2656, (3444 with dial 9 inch, 11 inch discs). (Item #: 122257, Ref: S.70921) $27.00
No Picture Clutch Alignment Tool - 1-1/8"x10 and 1-11/16"x16 Spline, .787" Pilot - For International / Farmall tractor models 300, 330, 340, 350, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, 3616, Pilot Diameter: .787", 1st Spline: 1-1/8", 10 Spline, 2nd Spline: 1-11/16", 16 Spline, (Item #: 176767) $44.60
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $27.00
Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $18.50
Clutch Bearing Seal Kit - For International / Farmall tractor models 300, 350, 460, 544, 606, 656, 664, 666, 686, 2544, 2606, 2656, Contents: 1-832375 Release Bearing, 1-836304 Pilot Bearing, 1-363514 IPTO Seals, 1-2385243 IPTO Bearing Cage O-Ring and 252556 IPTO Bearing Cage O-Ring, (Item #: 108786) $81.00
Clutch Disc - 11 inch diameter, 1-3/32 inch hub, 10 spline. For tractor models 656, 664, 666, 686, 2656, 3616. (Item #: 184835, Ref: 388625R91) $185.00
Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $128.00
Clutch Disc - For International / Farmall tractor models 504 (Farmall Gas or Diesel, /60-12/68), 504 (Gas or Diesel, /60-12/68), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 560 (Farmall Gas or Diesel, 1/58-12/63), 560 (Gas or Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 660 (Gas or Diesel, 1/59-12/63), 664 (Diesel, 1/72-12/73), 666 (Gear Drive, 1/72-12/72), 686 (Gear Drive, 1/69-12/71), 2504, 2544 (Diesel), 2606 (Diesel, 1/61-12/67), 2656 (1/63-12/71), Replaces International OEM number 375701, 1-1/2", 6 Spline, (Item #: 166109) $122.00
No Picture Clutch Disc, 4 Pad - For International / Farmall tractor models 656 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 664 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 666 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 686 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 2656 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 3616 (Gas: s/n 1946-later; Diesel: s/n 2118-later), Compatible with International Construction and industrial models 3616 (Gas: s/n 1946-later; Diesel: s/n 2118-later), Replaces International OEM number 388625, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 166064) $146.00
Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00
Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3514, 3616, Compatible with International Construction and industrial models 3616, Replaces International OEM number 388625R93, 388625R93R, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 203639) $167.50
Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3616, Compatible with International Construction and industrial models 3616, Replaces International OEM number 388625R93, 388625R93R, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, For a New version of this sku use Item #: 184835, (Item #: 204190) $109.00
Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3514, 3616, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 388625R93, 388625R93R, 388625HD8, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 8 Reg Pads, (Item #: 204415) $170.01
Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60
Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00
Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01
Pressure Plate Assembly - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3616 (Gas, s/n 1946-later, Diesel, s/n 2118-later), Replaces International OEM number 388616R91, 11" Diameter, 1-3/4", 16 Spline, Fixed, Additional Handling and Oversize Fees Apply To This Item, (Item #: 166080) $347.00
Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50
Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01
PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $62.00
Remanufactured Clutch Kit - Our remanufactured clutch kit contains: a 12 inch, 16 spline, 1 5/8 inch hub, 12 spring remanufactured pressure plate assembly; a 11 inch, 10 spline, 1 3/32 hub, 4 pad remanufactured clutch disc; new release and pilot bearings. For tractors 656, 664, 666, 686, 2656 For 2656, 656, 664, 666, 686. (Item #: 202010, Ref: 388616K) $359.75
T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.10

Cooling System
Belt - This Fan Belt measures 1/2 inch wide and 48 5/8 inches long. For Diesel models 2706, 2806, 656, 660, 706, 806. Verify measurements before ordering. (Item #: 123127, Ref: 378113R2) $6.70
Belt - Generator / Water Pump - Outside diameter 47.77 inches, 1/2 inch v-belt. Replaces 403617R1, 372596R1, 393415R1, L71058. Used on the following gas tractors: Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Item #: 173491, Ref: 310050) $10.20
Fan, 6 Blade - 20.940 inch diameter, 1.250 inch pilot hole, 1.945 inch center to center on mounting bolt. For tractor models (2544, 544 diesel/gear drive), (2656 diesel), (Farmall 2706, 706 serial number 19250 and up, IH serial number 3000 and up), (544 gas/syncromesh trans), (656, 664 diesel). (Item #: 107023, Ref: A173726) $212.00
Fan Belt - Generator belt measures 49.77 inches Length and 0.50 inch Width, fits engines: D236, and D282. For tractor models: 460, 560, 660. Also, for engine D282 Alternator for tractor models 656, 706, 2706. For 2706, 460, 560, 656, 660, 706. Please verify measurements before ordering (Item #: 123129, Ref: 385674R1) $10.40
Fan Belt - This is a 17/32 inch X 44.27 inch V-Belt. It is used on some International 656 Gas with Gear Drive. Note that some models used more than one size belt. Verify measurements before ordering. Replaces SBA080109064, 1512172532, 15601-97010, 1560197010, 396829R1, 700709214, 71352142, 86514598, A75579, B3440, D129916, GAT9440, 133758R1, 1352142, 15121-72532, 1560197010, 1612875C1, 1612875C91, 17442, 2M5840, 259440, 3H3897, 301-C396829, 4707726, 476614, 617143, 619508, 685590, 7L290 (Item #: 117806, Ref: 86514598) $9.50
Heater, Engine Block - This is a Frost Plug Heater with cord. It is 600 watts, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Power Cord is about one foot long. Replaces 407046R92. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D301. Tractors: 340, 460, 504, 560, 606, 656, 660, 706, 806, 2504, 2806. Combines: 315, 403, 503 Hillside, 503, 615, 715. (Item #: 120027, Ref: 106725A1) $43.00
Radiator - Core size 19.0 inches wide, 20.312 inches high. This fits utility tractors ONLY. For tractor models (656 gas utility, hydro), (656 diesel utility, hydro and with gear drive). (Item #: 101720, Ref: 396496R2) $570.00
Radiator - This radiator measures 3.5 inches thickness, 19.125 inches wide and 20.375 inches high. Radiator has 2 inch diameter hose connections. For tractor models (Farmall 656 gas), (Farmall 706 diesel serial number up to 37236, IH diesel serial number up to 5273), (706, 756 all LP and heavy duty gas). (Item #: 101721, Ref: 378713R92) $385.00
Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.60
Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.00
Radiator Hose, Lower - Radiator hose, lower. For tractors to serial numbere 5274, and Farmall to serial number 37237. For tractor models Farmall 460, 560, 656, 660, 706. (Item #: 115648, Ref: 369922R1) $15.10
Radiator Hose, Lower - Radiator hose, lower for diesel tractors. International tractor to serial number 5274, and Farmall tractors to serial number 37237. For 460, 560, 656, 660, 706. (Item #: 115646, Ref: 371307R1) $13.30
Radiator Hose Upper - Radiator hose upper. For international tractor to serial number 5274, and Farmall tractor to serial number 37237. For tractor models 656, 706. (Item #: 116808, Ref: 379237R2) $20.10
Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $21.00
No Picture Radiator, Premium Used - For International tractor models 656, 2656, Replaces International OEM nos 396496R2, 391200R91, Our premium used radiators have been cleaned, inspected, and pressure checked, (Item #: 300107) $380.01
No Picture Radiator Support Panel - Left Hand, Used - For International tractor models 656, 706, 2656, 2706, Replaces International OEM nos 378664R11, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441690) $73.01
Thermostat - Thermostat. For tractor models Gas 460, 560, 656, 660, 806, 706, 2606, 2706, 2806. Does not come with gasket. We do not have a gasket available. (Item #: 109692, Ref: 108120R92) $11.70
Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Item #: 110010, Ref: R1852) $39.00
Thermostat - This Thermostat opens at 180 degrees F. It is used on the following Diesel tractors: 2606, 2706, 300, 350, 3616, 400, 450, 460, 560, 606, 656, 660, 706, TD6. Replaces 262882R1, 313942R91 (Item #: 110455, Ref: 70229927) $20.80
Tower Hose Clamp 2.685" to 2.995" - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, Super A, Super C, Super H, 100, 130, 140, 200, 230, 240, 300, 330, 350, 400, 450, 656, 706, 756, 806, 826, 856, 2706, 2756, 2806, 2826, 2856, Compatible with International Harvester (s) 55, 350, 550, 650, Replaces International OEM number 39205H, 706081R91, (Item #: 130443) $7.50
Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $86.00
No Picture Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30
Water Pump Pulley - Used with 601816C92 water pump. For tractor models Hydro 70, Hydro 86, 2606, 2656, 2706, 2756, 403, 460, 560, 606, 656, 660, 666, 706, 756, 766, 806, 826, 856. (Item #: 167558, Ref: 395815R2) $58.00
Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01
Water Pump, Remanufactured, 746170C91, 318118R2 - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 2656, Compatible with International Combine (s) 615, Replaces International OEM number 746170C91, Replaces International Casting number 318118R2, 169204R1, 303394R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, With Press On Pulley, (Item #: 205079) $111.01

Decals and Emblems
Chassis Decal Set - Vinyl - International Chassis Decal Set - Vinyl Die Cut. DOES NOT INCLUDE HOOD SET. For tractor models: 424, 444 US Built, 544, 656, 686, HYDRO 70, HYDRO 84. (Item #: 183256, Ref: R0548V) $68.00
Decal Set - This is a Hood Only Decal Set for 656. This is a Mylar set. Order this with part number R0548V for a complete set. (Item #: 183197, Ref: R3618) $60.00
No Picture Decal Set for Hood - Vinyl Die Cut Hood Decal Set for model 656. Order with R0548V for a complete set. (Item #: 100992, Ref: R3618V) $234.00
Front Emblem - Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86. (Item #: 108481, Ref: 2751846R1) $19.10
Front Emblem - Plastic "IH" red, black and white, 3-7/8 inch x 3-1/2 inch. Center to center measurement on the mounting posts is 2-17/32 inch. For tractor models 544, 656, 664, 706, 2544, 2656, 2706, 4100, 4156, 4166, 4186, 4366, 4386. (Item #: 107904, Ref: 2751848R1) $19.80
Grille Emblem - For International / Farmall tractor models 544, 656, 706, 4100, 4156, 4166, 4186, 4366, 4386, Replaces International OEM number 2751845R1, Height:4", Chrome plated die cast, (Item #: 107905) $44.00
Hood Ornament, Chrome - For tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544. (Item #: 108483, Ref: 369180R1) $76.00
Hood Ornament, Used - For International tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2826, Replaces International OEM number 369180R1, Chrome finish, For a new version of this item use Item #: 108483, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435392) $43.20
International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.60
Side Emblem - Says "Farmall". For tractor models 504, 656, 706, 806, 1206. (Item #: 108486, Ref: 377796R1) $85.00
Side Emblem - Says "International". For tractor models 656, 756, 856, 826, 1026, 1256, 1456. (Item #: 108431, Ref: 2753920R1) $111.00

Drive Train
1st And Reverse Slider Gear - This 1st and Reverse Slider Gear has 14 splines and 57 teeth. It is used on 2544, 2656, 544, 656, 664, 666, 686 and replaces original part number 388165R1. (Item #: 111280, Ref: 388165R1) $180.00
4th Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388151R1, Teeth: 44, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430779) $263.01
Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $16.10
Clutch Shaft Carrier Seal - This clutch shaft carrier seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. Fits (340, 460, 504, 656 fits as a clutch shaft carrier seal for forward and reverse transmissions), (544, 606, 665 fits as a forward/reverse transmission seal). Replaces: 350891R91, 358801R91, 358836R91, 370510R91, 371410R91, 515448R91. (Item #: 165141, Ref: 195501M1) $4.80
Gear Shift, Torque Amplifier, Forward, Reverse Knob - For tractor models 544, 656, 664, 666, 686, 2544, 2656, 2826, 3488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 826, 966, 1026, 1066. (Item #: 111042, Ref: 388180R2) $14.70
Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Hand Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, (Item #: 200264) $7280.01
No Picture Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Foot Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 205088) $8100.01
PTO Shaft 540 RPM - For International / Farmall tractor models Hydro 70, Hydro 86, 544 (w/ Independent Live PTO), 656 (w/ Independent Live PTO), 664 (w/ Independent Live PTO), 666, 686, 2544 (w/ Independent Live PTO), 2656 (w/ Independent Live PTO), Replaces International OEM number 389132R2, 71260C1, 389132C1, Tooth Front Splines: 17, Length: 11.963", (Item #: 128493) $240.00
Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01
Shift Fork, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388172R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441395) $117.01
Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $316.00
Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $45.20
Torque Amplifier Gasket Set - For tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686. (Item #: 115574, Ref: 395915) $92.00
Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Item #: 113413, Ref: 361283R32) $188.00
No Picture Transmission Shift Handle Housing, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388181R2, Replaces International Casting nos 388181R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445760) $278.01

Electrical System
Alternator - Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100. (Item #: 113606, Ref: 1100883) $120.00
Alternator - 12 volt, 55 amp. For tractor models (105, 205 1968 to 1970 with 153 gas), (315 1968 to 1970 with BD-331), (403 1968 to 1970 with 301 diesel/263 gas), (503 1968 to 1969 with 282 gas/301 diesel), (615 1971 with 263 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720. (Item #: 113606, Ref: ADR0231) $120.00
Battery Cover - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, 2656, Replaces International OEM number 388219R1, 538585R2, 538585R1, Does not fit utility models, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 104019) $77.00
Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Tractors: 656, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2656, 2706, 2756, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, Hydro 100, Hydro 186. Combine: 715, 815, 915, 1420, 1440, 1460, 1470, 1480. Windrower: 4000, 5000, 5500, 8830. Replaces 539053R3, 539053R2, 539053R1, 1987442C1, 1987399C3, 175577C2, 175577C1. (Item #: 108656, Ref: 72162089) $73.00
Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $15.00
Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: 424, 444, 450, W450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 806, 826, 856, 3514, 3616. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.20
Distributor, Remanufactured, 368051R - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2806, 2856, Replaces International OEM number 368051R, Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, (Item #: 203534) $265.01
Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.70
Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20
Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $10.90
Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $10.90
Glow Plug - For tractor models 504, 706, 656, 560, 660, 2504, 2706, 2656, 403, 405, (715 serial number 23001 and up) with engines D188, D236, D282, D301. Replaces 343894R1, 343977R1. (Item #: 111187, Ref: 304131R3) $17.00
Glow Plug - Sold individually. 0.197 inch tip diameter, 5 inch overall length and 0.311 inch outside diameter where it slides into the head. For combines: 101, 151, 181, 315, 403, 453, 503, 715. For Tractors TD6, TD9, 340, 460, 504, 560, 606, 656, 660, 706, 3514, 3616, 3800, 3850, TD340. Replaces 304131R1, 343977R1, 343894R1, 304131R3, 304131R2. (Item #: 111187, Ref: 304131R3) $17.00
Glow Plug Meter Gauge - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2606, 2656, 2706, Compatible with International Combine (s) 101, 151, 181, 403, 453, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD340, 2500, 2504, 3514, 3616, Replaces International OEM number 370380R91, 370380R92, 378352R91, 404740R1, (Item #: 121659) $49.94
Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.00
Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $28.60
Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $29.00
No Picture Starter - Delco Replaces OEM 1107543, 1107564, 1108657. TYPE: DR 20MT, 9 teeth, CCW rotation, volt/KW: 12. NOTE :C-221 Gas/LPG, LPG Engine (YR.59-58). Fits these models: 340 DSL (1962-63), 350 DSL (1956-58), 350 DSL (1957), 3514 DSL (1965-66), 3616 DSL (1965-66), 460 DSL (1958-59), 460 DSL (1962-64), 460 GAS, LPG, (1960-61), 460 GAS, LPG, (1960-64), 460 GAS with LPG, (1958-59), 460HC GAS, LPG, (1960-64), 504 DSL (1961-66), 560 GAS with LPG, (1958), 560 GAS with LPG, (1958-64), 560HC GAS with LPG, (1958-64), 606 DSL (1961-66), 606 GAS, LPG, (1961-64), 656 GAS, LPG, (1965-66), 660 GAS, LPG, (1960-61), 660 GAS with LPG (1958-59), T340 (1960-62), TD340 (1962-64), TD340 (1967), 560 GAS with LPG, (1959-64). Refundable $55.00 core charge will be added to your order. (Item #: 203447, Ref: TS-1032) $381.10
No Picture Starter - For tractor models (460 Gas, 1958 to 1959), (460, 560, 660, 606, 706 Gas, 1960 to 1967), (T340, 3515 Gas, 1958 to 1959 and 1965 to 1967), (T6 Crawler 1958 to 1963), (F504 Gas 1961 to 1965), (F656 Gas 1965 to 1966) (3616 1965). REBUILT Starter. 12 Volt. Also replaces 1107229, 1107744. (Item #: 203200, Ref: 1107720) $360.50
No Picture Starter - Delco (4193) - For International / Farmall tractor models 460 (D, 1960-63), 504 (D, 1961-66), 504 (D, Farmall, 1961-66), 560 (Farmall, Gas and LP1965-66), 606 (Diesel, 1962-67), 606 (Gas and LP, 1962-67), 656 (Gas and LP, 1965-66), 656 (Farmall, Gas and LP1965-66), 3514 (with D-188 Diesel or D-236 Diesel, 1965-66), 3616 (with D-188 Diesel or D-236 Diesel, 1965-66), Replaces Case IH OEM number 336770R91, 374583R91, 381904R91, Replaces Delco Remy Starter number 1107543, 1107564, 1998333, 323-685, Replaces Starter number 4193, Lester 4193, Volts: 12, Teeth: 9, Rotation: Counter Clockwise (CCW), Type: Direct Drive, (Item #: 189444) $465.00
No Picture Starter - Delco (4271, 4282) - For International / Farmall tractor models Hydro 70 (Gas), Hydro 86 (Gas), 504 (s/n: 15261-later, Farmal Diesel), 504 (s/n: 17830-later, Diesel), 544 (Hydro, Gas), 656 (Hydro, Gas, Late s/n), 656 (s/n: 36467-later, Hydro, Farmal, Gas), 666 (Hydro, Gas), 3616 (1967-70, Diesel), Compatible with International Construction and industrial models 2504 (s/n: 15261-later, Diesel), 2504 (s/n: 17830-later, Diesel), 3514 (1967-69, Diesel), 3514 (1970-71, C173 Hydro, Gas), Replaces Case IH OEM number 369459R93, 396459R91, Replaces Delco Remy manufacturer number 1107854, 1107855, 1998496, 323-691, Replaces Starter number 4271, 4282, Lester 4271, 4282, Volts: 12, Rotation: Counter Clockwise (CC), Direct Drive, Teeth: 10, (Item #: 189419) $431.00
No Picture Starter - Delco Style DD (3934), Remanufactured, Delco Remy, 1113198, 400121R92 - For International / Farmall tractor models 544 (with D239), 656 (with D282), 666 (with D312), 2544 (with D239), 2656 (with D282), Replaces International OEM number 400121R92, Replaces Delco Remy manufacturer number 1113198, 1113187, Replaces manufacturer number 3934, 141-112, 141-112B, 91-01-4033, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 12, (Item #: 203416) $515.00
No Picture Starter - Delco Style DD (4212) - For International / Farmall tractor models 460, 504, 560, 606, 656, 660, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models T6, T340, 3514, 3616, Replaces International OEM number 374582R91, 377100R91, Replaces Case OEM number 104189A1, A480683Z, Replaces Delco Remy manufacturer number 1107229, 1108321, 1107744, 12301285, 19136156, 1107720, Replaces manufacturer number 4212, 140-747, 140-747A, 91-01-3689, For gas applications, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 9, For a Remanufactured version of this sku use Item #: 203200, (Item #: 160358) $338.18
No Picture Starter - Delco Style DD (4236) - For International / Farmall tractor models 504, 544, 656, 666, 686, 2544, 2656, Compatible with International Combine (s) 151, 181, 615, 715, 815, 915, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 396523R92, 396523R93, 396556R92, Replaces Case OEM number 104193A1, 396522R91, A485615Z, Replaces Delco Remy manufacturer number 1108343, 1108344, 1109360, 323-635, 1998283, Replaces manufacturer number 4236, 140-746, 140-746A, 91-01-4181, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For gas applications, For a Remanufactured version of this sku use Item #: 203453, (Item #: 160374) $326.57
Starter Drive - Starter drive, services Delco starters: 1107854, 1108343, 1108691, 1109360, 1108334, 1108344, 1109252, 1113201. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 966, 1066, 1466, 1468, 2504, 2656, 2706, 2756, 282 For 100, 1066, 1466, 1468, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 86, 966, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 110771, Ref: 1877347) $22.90
Starter Drive - Starter drive, services Delco starters: 1108323, 1107364. For tractor models 424, 444, 656, 2424, 2444, 2656. 9 teeth. For 2424, 2444, 2656, 424, 444, 656. Also replaces 1946220. (Item #: 127285, Ref: 1892899) $34.00
Starter Drive - Starter drive, services Delco starters: 1107228, 1107275, 1107720, 1108642, 1107229, 1107543, 1107744. For tractor models 404, 460, 504, 560, 606, 656, 660, 706, 2404, 2504, 2606, 2656, 2706. 9 teeth. (Item #: 110776, Ref: 1939109) $41.20
Starter Drive - Starter drive, services Delco starter: 1113198. Tractors: 544, 656, 664, 666, 2544, 2656. 12 teeth. For 2544, 2656, 544, 656, 664, 666 (Item #: 179267, Ref: 1965788) $46.00
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
No Picture Starter, Rebuilt - A rebuilt Delco start that is 12 volts, counter clockwise rotation and has a 10 tooth starter drive for (544, 2544, 656, 2656, all Gas with ST, 1967 to 1973), (3514, 3616 Gas 1967 to 1973), (504, 3514 Gas 1969 to 1974), (C-200, 263 Gas 1968 to 1970), (3514 with C-173 Engine with ST 1969 to 1970), (915 Gas Combines 1969 to 1974), (666 with ST 1972 to 1974), (F-686 AG Tractor 1977 to 1979), (706 Gas 1967 to 1968), (766 Gas 1967 to 1968). REBUILT Starter. 12 Volt). Replaces 1108343. (Item #: 203453, Ref: TS-1230) $359.57
Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.60
Starting Button - Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Item #: 112232, Ref: A36948) $7.60
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.00
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.00
Tune-up Kit - Tune-up Kit for an IH Distributor, 1963 and later. 6 cylinder engine (C221, C263, C291, C301). For tractor models 460, 560, 656, 660, 706, Hydro 70, Hydro 86, 666, 686, 756, 766, 806, 826, 856. With 18 mm, 1/2 inch reach, 7/8 inch spark plugs (AL 386), points, condenser, rotor and gap gauge. Verify correct spark plug size and type. (Item #: 111813, Ref: IHTK3) $36.00
Voltage Regulator, 12 Volt - Flat Mount Voltage Regulator. For tractor models 2404, 2424, 2504, 2606, 2656, 2706, 2806, 404, 424, 504, 606, 656, 706, 806. Replaces Delco 1119000, 35A5137 1118897, 121579C1, 375055R1. (Item #: 105521, Ref: 121579C1) $92.00

Engine Bearings
No Picture Cam Bearing Set - Camshaft bearing kit, 4 bearings. Individual bearings not available. For C291 CID gas 6 cylinder. For engine in tractors 666, 686, 706, 756, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106671, Ref: CBK-H221) $36.10
Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10
Connecting Rod Bearing Set - .020" - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 376667R91, Size: .020", (Item #: 184148) $198.00
No Picture IPTO Bearing Cage O-Ring - For International / Farmall tractor models 330, 340, 460, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 252556, (Item #: 176724) $7.10
Main Bearing Set, .010 - .010 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376679R91, 332276R91, 376670R91, 376673R91, YTO MBK221-010 (Item #: 106613, Ref: MBK221-010) $124.00
Main Bearing Set, .010 - Main Bearing Kit (.010 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 376670R91, 332276R91, 376673R91, 376679R91 (Item #: 167378) $111.00
Main Bearing Set, .020 - .020 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376683R91, 332279R91, 376686R91, 376692R91, YTO MBK221-020 (Item #: 106614, Ref: MBK221-020) $121.00
Main Bearing Set, .020 - Main Bearing Kit (.020 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 190746) $225.00
Main Bearing Set - .030 - 0.030 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used for the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382358R91, 332270R91, 367291R91, 367297R91 (Item #: 106615) $165.00
Main Bearing Set, .030 - Main Bearing Kit (.030 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 167101) $89.00
Main Bearing Set, Standard - Standard main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382357R91: 1-367276R91, 1-367282R91, 1-367279R91 and 1-367285R91 YTO MBK221 (Item #: 106612, Ref: MBK221) $111.00
Main Bearing Set, Standard - Main Bearing Kit (standard) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 382357R91, YTO MBK221A (Item #: 185622, Ref: MBK221A) $100.00
Pilot Relief Valve, Used - For International tractor models 544, 656, 664, 666, 686, 756, 2544, 2656, 2756, 2826, Replaces International OEM nos 389033R93, 1600 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431146) $89.01
No Picture PTO Shaft Seal - For International / Farmall tractor models 544, 656, 664, 666, 686, 706, 756, 766, 786, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (prior to s/n 25999), 2544, 2656, 2756, 2826, 3088, 3288, 3388, 3688, 6388, 21206, 21256, 21456, Replaces International OEM number 381480R1, 472258, 634036, CR13569, (Item #: 111619) $6.40
Rod Bearing - Rod Bearing in .002. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.372 inches. Replaces YTO CRK221-002 and 367632R11. Sold individually. (Item #: 106486) $12.20
Rod Bearing - Rod Bearing in 0.010. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.364 inches. Replaces YTO CRK221-010 and 376666R11. Sold individually. (Item #: 106487) $7.40
Rod Bearing - Rod Bearing in .020. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.354 inches. Replaces YTO CRK221-020 and 376668R11. Sold individually. (Item #: 106488) $9.90
Rod Bearing - Rod Bearing in .030. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.344 inches. Replaces YTO CRK221-030 and 367631R11. Sold individually. (Item #: 106489) $12.20
Rod Bearing - Rod Bearing in standard. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Standard journal measures 2.374 inches. Replaces YTO CRK221-STD and 367408R11. Sold individually. (Item #: 106485) $13.20

Engine Gaskets
Conversion Gasket Set - For International / Farmall tractor models 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6 (62 Series), TD9B, Compatible with International Engine (s) D236, D282, DT282, D301, (Item #: 168998) $84.00
Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.20
Full Gasket Set - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Engine (s) C221 (6 cylinder), C263 (6 cylinder), C291 (6 cylinder), C301 (6 cylinder), Includes crankshaft seals, (Item #: 186637) $155.00
Full Gasket Set - For 460, 606, 656, 2606, 2656, 27063514, 3616 with D236 Diesel Engine (Item #: 106721, Ref: FS3843) $205.00
No Picture Full Gasket Set - For 560, 656, 660, 706 with D282 Diesel Engine (Item #: 106721, Ref: FS3843) $205.00
Gasket set, full - For gas C221, C263, C291 and C301 6 cylinder engines. Complete gasket set with crankshaft seals (where required). 1 used per engine. (Item #: GK7799S) $155.94
Head Gasket - For International / Farmall tractor models 460, 560, 606, 656, 706, 2706, 3616, Compatible with International Engine (s) D236 (Diesel), D282 (Diesel), Replaces International OEM number 134400A1, (Item #: 128679) $136.00
Head Gasket Set - For C291 or C301 CID gas 6 cylinder engines in tractors: 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (upper gasket set with head gasket). (Item #: 106689, Ref: VGK7799S) $100.00
Head Gasket Set - For 282 CID 6-cyl Diesel Engines in: 2606, 2656, 2706, 460, 560, 606, 656, 660, 706. (Upper gasket set with head gasket). (Item #: 106690, Ref: VGK8334SB) $140.00
Head Gasket Set - Used on International D301, UD236, UD282, UDT282, D236, D282, DT282 6 Cylinder Engines. It includes nozzle and precup gaskets. Replaces 134403A1 (Item #: 106690, Ref: HS3843) $140.00
No Picture Lower Gasket Set - For tractor models 560, 656, 660, 706 with C263 gas engine. (Item #: 106725, Ref: CS3153) $68.00
Oil Pan Gasket - Oil Pan Gasket. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106706, Ref: 369984R1) $10.80
Push Rod Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301, D236, D282, Replaces International OEM number 369982R1, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128736) $17.20
Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $22.20
Valve Cover Gasket - For International / Farmall tractor models 460, 560, 606, 656, 706, 2706, 3616, Compatible with International Engine (s) D236 (Diesel), D282 (Diesel), Replaces International OEM number 278308R3, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128680) $14.70
Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301 (Gas), Replaces International OEM number 369983R2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128683) $10.50

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - C263 Gas - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons). Kit contains sleeves and sleeve seals, pistons and piston rings (3-9/16 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130603, Ref: BEKH1177-LCB) $695.00
Basic Engine Overhaul Kit, Less Bearings - D282 Diesel - For D282 CID Diesel 6-cylinder engine. Cupped head piston. Tractor models 560 and 660 using Engine serial number 40699 to serial number 44821 AND tractor models 656, 706, 2656 and 2706 using up to Engine serial number 44821. Sleeve flange diameter 4.165 inch. Kit contains sleeves and sleeve seals, pistons and piston rings (3-11/16 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130605, Ref: BEKH1174-LCB) $843.00
Basic Engine Overhaul Kit, Less Bearings - D282 Diesel - For D282 CID Diesel 6-cylinder engine, cupped head piston. For tractor models 560 and 660 Engine serial number 44822 and up and models 656, 706, 2656 and 2706 all with Engine serial number 44822 to serial number 71777. Kit contains sleeves and sleeve seals, pistons and piston rings (3-11/16 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: BEKH1174B-LCB) $925.00
Basic Engine Overhaul Kit, Less Bearings - D282 Diesel - Models 656, 706, 2656, 2706 all using engine serial number 71778 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings (3-11/16 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130608, Ref: BEKH1184A-LCB) $750.00
Basic In-Frame Engine Kit - Models 656, 706, 2656, 2706 to engine serial number 71778 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189589, Ref: BIFH1184A) $621.00
Basic In-Frame Engine Kit - C263 Gas - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons). Kit contains complete sleeve and piston kit with rings (3-9/16 inch standard bore), pins and retainers, upper gasket set (with head gasket) and pan gasket. (Item #: 186114, Ref: BIFH1177) $620.00
Basic In-Frame Engine Kit - D239 Diesel - For tractor models 560, engine serial number 6766 and up, 660 engine serial number 4370 and up and models 656, 706, 2656 engine serial number 44821 to serial number 71777. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers (3-11/16 inch standard bore), upper gasket set (with head gasket) and pan gasket. (Item #: 189588, Ref: BIFH1174) $818.65
Cylinder Sleeve - For International / Farmall tractor models 606, 656, 706, 2706, 3616, Compatible with International Engine (s) D282 (s/n 71777-later), Replaces International OEM number 609028C21, 609028C1, 3.873" Flange Diameter, (Item #: 128622) $30.50
Engine Cylinder Sleeve - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9, TD9B, TD340, 2500, Compatible with International Engine (s) D166 (early), D188 (early), D236, D282 (.875" pin, wide flange liner), DT282 (1.125" pin, wide flange liner), Replaces International OEM number 278272R1, Bore: 3.6875", Flange O.D.: 4.165", Flange Thickness: .1875", (Item #: 108753) $67.00
No Picture In-Frame Overhaul Kit - 3 9/16 inch bore. For 656, 706 with C263 Gas Engine. Contains pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. Note: The main bearings in the kit can have either a 3-3/4 inch or a 4 inch diameter flange. Please specify in the comments of checkout which size you need. (Item #: 184660, Ref: R3388-IFK) $764.72
Valve Overhaul Kit - Fits 656, 706, 2656, 2706, 666, 686, 756, 766, 2756, Hydro 70, 86, 806, 826, 2806, 2826, 2856 (Gas 6 cylinder, C263, C291, C301). Kit includes valves (Stellite Exhaust Valve), valve springs, valve keys, valve guides. (Item #: 120320, Ref: VOKH263S) $332.00

Engine Parts
1st and Reverse Sliding Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 388165R1, Teeth: 57, Splines: 14, For a new version of this item use Item #: 111280, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411280) $77.01
3rd Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388150R1, Teeth: 37, Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409376) $153.01
Bull Pinion and Brake Shaft, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388285R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441505) $245.01
Camshaft - For International / Farmall tractor models Hydro 70, Hydro 86, 460 (engine s/n 5610-later), 560 (engine s/n 6765-earlier), 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 2606 (engine s/n 12799-13753), 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 205, 303, 315, 403, 453, 503, 615 (engine s/n 44821-earlier), 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6 (engine s/n 36694-56634), TD6 (early), TD9, TD9B (engine s/n 6902-earlier), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) C221, C263, C291 (late), C301, D236 (narrow flange liners), D282, DT282, D301 (narrow flange liners), Replaces International OEM number 367229R1, (Item #: 160894) $286.00
Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01
Clutch Shaft Coupler - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, For applications with mechanical TA, Coupler Does Not Include Part 364411R1 Snap Ring, (Item #: 113408) $59.00
Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01
Connecting Rod, Used - For International tractor models 330, 340, 460, 504, 560, 656, 660, 706, 2500, 2504, 2606, 2706, 3514, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D166, D188, D236, D282, D301, Replaces International OEM nos 306280R12, Replaces Casting nos 306280, 306280R, 306280R1, Diesel Engines, Length Center to Center: 7.250", Housing Bore: 2.4995" - 2.5000", Pin Diameter: 1.1252" - 1.1258", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498382) $50.01
Constant Mesh Gear, Used - For International tractor models 656, 666, 686, 2656, Replaces International OEM nos 388152R1, Teeth: 59, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429970) $204.01
Crankshaft, Remanufactured, 320185R, 367267R - For International / Farmall tractor models 560 (with C263, C291 or D282), 656 (with C263, C291 or D282), 666 (with C291), 686 (with C291), 706 (with C263, C291 or D282), 756 (with C291), 766 (with C291), 806 (with C301), Replaces Casting number 320185R, 367267R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Additional Handling and Oversize Fees Apply To This Item, (Item #: 200249) $780.01
Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30
No Picture Cylinder Head, Remanufactured, 323770R - For International / Farmall tractor models 560 (Late), 606, 656, 706, Compatible with International Combine (s) 715, Replaces International Casting number 323770R, Casting No. 323770R, Engine D-282, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205501) $1375.01
No Picture Cylinder Head, Remanufactured, 323771R - For International / Farmall tractor models 560 (Late), 606, 656, 706, Compatible with International Combine (s) 715, Replaces Casting number 323771R, 323773R, Engine D-282, Cylinders 6, Casting No 323771R, 323773R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200208) $1650.01
No Picture Cylinder Head, Remanufactured, 378240R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 378240R, Casting No. 378240R, Engines C-221, C-263, C-291, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205503) $1100.01
No Picture Cylinder Head, Remanufactured, 380938R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 380938R, 382099R, Casting No. 380938R, 382099R, Engine C-221, C-263, C-291, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205502) $660.01
No Picture Cylinder Head, Remanufactured, 387972R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 387972R, 383666R, 387718R, Engine C-221, C-263, C-291, Cylinders 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200211) $1225.01
Cylinder Head, Used - For International tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine(s) 615, 715 (Gas), Replaces International Casting number 380938R, 382099R, Engine(s): C-221, C-263, C-291, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205502, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405502) $332.01
Cylinder Head, Used - For International tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine(s) 615, 715 (Gas), Replaces International Casting number 387718R, 383666R, 387972R, Engine(s): C-221, C-263, C-291, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200211, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400211) $315.01
No Picture Cylinder Head - with Valves, Remanufactured, 323771R - For International / Farmall tractor models 560 (Late), 606, 656, 706, Compatible with International Combine (s) 715, Replaces International Casting number 323771R, 323773R, Engine D282, Cylinders: 6, Casting No. 323771R, 323773R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 205421) $1999.01
Drive Shaft Coupling, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, Splines: 14, For a new version of this item use Item #: 113408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435618) $31.01
No Picture Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.10
No Picture Flywheel - With Ring Gear. For 656 with D282 Engine. Replaces OEM number 388302R21. (Item #: 122026, Ref: R2923) $1039.01
No Picture Flywheel With Ring Gear - For International / Farmall tractor models 656 (gas engine with gear drive), 666 (gas engine with gear drive), 686 (gas engine with gear drive), Replaces International OEM number 396420R91, Size: 11", Step: 1.437", Teeth: 133, Engine: C-263, C-291, (Item #: 122027) $771.00
Mechanical TA Back Gear - For International / Farmall tractor models 656, 666, 686, Replaces International OEM number 389156R1, (Item #: 111215) $236.00
Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90
Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40
Ring Gear, Flywheel - Has 133 teeth. Fits tractors: HYDRO 70 (with C-291, D-312 Engines), HYDRO 86 (with C-291, D-310, D-312 Engines), 504 (Gear and Hydro Drive with D-188 Engine serial number 13676->), 544 (with C-200 Engine), 656 (Gear and Hydro Drive with C-263 engine/Hydro Drive with D-282 Engine, 666 (Gear and Hydro Drive with C-291 Engine/Hydro Drive with D-312 Engine, 686 (Gear Drive with C-291 Engine).INDUSTRIAL/CONSTRUCTION: 2504 (gear and Hydro Drive with D-188 Engine 2544 (with C-200 Engine), 3500A (with C-200 Engine), 3514 (Gear and Hydro Drive with D-188 Engine, 3514 (with Synchromesh Transmission with C-175 Engine), 3514 (without Hydra-Shuttle Trans. with C-153 Engine, 8000 (Forklift with C-200 Engine). Measures 12 5/16 inch inside diameter and .485 inch width. (Item #: 116898, Ref: 396421R1) $61.00
Ring Gear, Flywheel - This Flywheel Ring Gear measures 12.332 Inch Inside Diameter, 13.560 Inch Outside Diameter, Has 134 Teeth and is .485 Inches wide. Fits International Tractors; 300 diesel, 330 diesel, 340 diesel, 350 diesel, 424 gas, 444, 460, (504 diesel serial number 13675 and earlier, gas serial number 29632 and earlier), 544 with Synchromesh Transmission, 606 gas, 656, 666, 686, 2424, 2444, 2544 with Synchromesh Transmission, 2606, 3514 engine serial number 29632 and earlier. Also fits Construction and Industrials; T340, 4000. Replaces 367042R1 (Item #: 121882, Ref: 367042R1) $61.00
Second Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388149R1, Teeth: 33, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496798) $204.01
Set Of Three Sungears - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, (Item #: 113409) $156.00
TA Clutch Carrier, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359895R3, For a new version of this item use Item #: 165256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441430) $45.01
Torque Amplifier Carrier - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces Case IH OEM number 359895R3, Teeth: 27, Flywheel Step: .900", (Item #: 165256) $167.00
Torque Amplifier Drive Shaft, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 360676R51, Splines: 10/ 14, Diameter: 1.128", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436810) $231.01
Valve, Exhaust - Price shown is for (1) exhaust valve. Stellite Faced Valve. Fits models: 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). (Item #: 128502, Ref: 372699R3) $23.80
Valve, Exhaust - Price shown is for each, sold only in multiples of 2 items. For tractor models 606, 2606, 656, 706, 2656, 2706. (D236 CID Diesel 6-cylinder engine. Cupped head piston) and models 560, 660 engine serial number 40699 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 166557, Ref: 612312C1) $19.90
Valve Guide - VALVE GUIDE For 2504, 2606, 2656, 2706, 3514, 460, 504, 560, 606, 656, 660, 706. (Item #: 173029, Ref: 278300R1) $10.10
Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70
Valve, Intake - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). (Item #: 191128, Ref: 234276R1) $16.50
Valve, Intake - Price shown is for 1 Intake Valve. MUST BE ORDERED IN MULTIPLES OF 2. For tractor models 606, 2606, 656, 706, 2656, 2706. (D236 CID Diesel 6-cylinder engine. Cupped head piston) and models 560, 660 engine serial number 40699 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Replaces 323774R1, S1956, 323774R2 (Item #: 173795, Ref: 323774R1) $12.70
Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $58.00
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 2656, 2706, 2756, 656, 666, 686, 706, 756, 766, HYDRO 70, HYDRO 86. Contains: springs, guides, locks, (no valves). (Item #: VSKH263S) $124.14
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 2606, 2656, 2706, 460, 560, 606, 656, 660, 706. Contains: springs, guides, locks, (no valves). (Item #: VSKH282B) $150.76
No Picture Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.70
Valve Tappet 0.999 Inch - These tappets are used in the following engines: C221, C263, C291, C301, (DT436 Engine serial number <121624), (DT436B Engine serial number <121624), (DT466 Engine serial number <140087), (DT466B Engine serial number <140087), D188, D236, D282, D360, D361, (D414 Engine serial number <155806), (D436 Engine serial number <121624), (D466 Engine serial number <140087). They are 0.999 inch diameter. Replaces original part numbers 72524R3, 684729C1, 911776R3, 91176R2, 911776R1, 76952R2, 677541C1, 606492, 28708A, 75524R3, 75524R2, 75524R1. (Item #: 108437, Ref: 911776R3) $7.80
Valve Train Kit - For International / Farmall tractor models 460 (engine s/n 5610-later), 560, 606, 656, 660, 706, 2606, 2656, 2706 (engine s/n 44822-71777), 3616 (engine s/n 16620-later), Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 315, 403, 453, 503, 615 (engine s/n 44821-later), 715 (s/n 23000-earlier), Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9 (92 series), TD9B (engine s/n 6903-11440), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) D236, D282, DT282, D301 (all 6 cylinder diesel), For applications with rotator below spring, Kit includes: Intake and exhaust valves, guides, springs and keepers, Intake Valves: 1.680" head diameter, 6.040" length, 45 degrees, Exhaust Valves: 1.370" head diameter, 6.060" length, 45 degrees, (Item #: 120319) $311.00
Valve Train Set - For International / Farmall tractor models 656, 666, 686, 706, 756, 766, 2656, 2706, 2756, Replaces International OEM number 237248R1, Replaces Intake Valves 234276R1, Exhaust Valve 372699R3, Valve Springs 367192R1, Valve Guides 535229R1, 237248R1, Valve Keepers 33K701, Stellite Exhaust Valves, (Item #: 114736) $279.17

Engine Pistons and Sleeves
Cylinder Sleeve - Used on C221 gas engines on 460, 606, 2606, 3616 and C263 gas engines on 560, 656, 660, 706, 2656, 2706, 3600A, 3800, 3850, this is a standard bore cylinder sleeve. It measures; Bore Diameter: 3.5625 inches / 90.4875mm, Flange Outer Diameter: 4.052 inches / 102.9208mm Flange Width: 0.189 inches / 4.8006mmm, Sleeve O.D. at Barrel: 3.6890 inches / 93.7006mm, Length: 7.625 inches / 193.6750mm. Replaces 367645R1, 3803698, RP141294, SD372 (Item #: 128647, Ref: 367645R1) $62.00
Piston Pin Bushing - Piston pin bushing, 4 or 6 used per engine depending on application. .875 inch inside diameter, .935 inch outside diameter. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2856, 300, 350, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 109736, Ref: 364913R1) $6.50
Sleeve and Piston Kit - Sleeve and Piston Kit for tractor models 560 engine serial number 6766 to serial number 44821 and 660 engine serial number 4370 to serial number 44821 and models 656, 706, 2656 to engine serial number 44821. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 3-11/16 inch standard bore. (Item #: PK174) $713.49
Sleeve and Piston Kit - Models 656, 706, 2656, 2706 to engine serial number 71778 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers for 1 engine. For 3-11/16 inch standard bore. (Item #: PK184) $441.01
Sleeve and Piston Kit, For Single Cylinder - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons). Sleeves, pistons and rings, pins and retainers. For 3-9/16 inch standard bore. Compression height is 2.024 inches. Uses pin bushing number 64913R1. (Item #: 169735, Ref: PK177) $72.00

Engine Rings
Piston Ring Set - PISTON RING SET. For 2656, 2706, 560, 656, 660, 706 all with 282 CID 6 cylinder diesel with standard bore 3 11/16 inches, to engine serial number 29264, cupped head piston, 4.165 inch sleeve flange diameter, 1 5/16 inch exhaust valve head diameter, 3 3/4 inch thrust bearing flange. Piston ring set, 2 at 1/8 inch (top ring is half keystone), 1 at 1/4 inch. 1 kit per engine. (Item #: 174314, Ref: PRS174) $102.00
No Picture Piston Ring Set - Ring set for 6 pistons, 1 used per engine. For C263 CID gas 6 cylinder engine. Contains 2 compression 3/32 and oil ring 1/4 per cylinder. For 2656, 2706, 656, 706 (Item #: 174314, Ref: PRS177) $102.00
Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Standard Bore: 3.5625", Ring Size: .030” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 120862, (Item #: 120861) $38.98
Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Standard Bore: 3.5625", Ring Size: .040” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 120861, (Item #: 120862) $43.00
Piston Ring Set - Standard - 2 Cylinder - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6, TD9B, TD340, 2500, Compatible with International Engine (s) D166, D188, D236, D282, DT282, Bore: 3.6875", Compression Rings per Piston: (2) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Half Keystone, Chrome 10 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a 2 cylinder set, (Item #: 128966) $75.00
Piston Ring Set - Standard - 2 Cylinder - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6, TD9B, TD340, 2500, Compatible with International Engine (s) D166, D188, D236, D282, DT282, Bore: 3.6875", Compression Rings per Piston: (2) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Half Keystone, Chrome 10 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a 2 cylinder set, For single cylinder set use Item #: 108754, (Item #: 179121) $99.00
No Picture Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Replaces International OEM number 539379R2, Bore: 3.5625", Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .030" use Item #: 120862, (Item #: 108033) $16.70