International Harvester / Farmall 660 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Accessories / Supplies
Engine Block Heater - Frost plug heater with cord. 600 watt, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Replaces 407046R92. Cord is 12 inches long. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D. For 2504, 2806, 315, 340, 403, 453, 460, 503, 504, 560, 606, 615, 656, 660, 706, 715, 806. (Item #: 120027, Ref: 106725A1) $43.00

Brakes
Brake Actuating Spring - Used with disc brakes. For tractor models (M from serial number 294226 and up), (MD from serial number 285505 and up), Super M, Super MTA, Super MV, Super MDV, Super W6, Super W6TA, Super WD6, OS6, ODS6, 400, 450, W400, W450, 560, 656, 660, 664, 666, 686, Hydro 70, Hydro 86. Replaces A30897, A41816. Replaces 357116R1, 619731C1, 72504717V. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Item #: 113798, Ref: A155624) $1.70
Brake Actuator Assembly - For International / Farmall tractor models 560, 660, Compatible with International Combine (s) 403, Replaces International OEM number 369080R91, (Item #: 105440) $296.00
Brake Actuator Assembly, Used - For International tractor models 560, 660, Compatible with International Combine(s) 403, Replaces International OEM number 369080R91, For a new version of this item use Item #: 105440, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430956) $161.01
No Picture Brake Disc - Bonded lined brake discs. Fits tractors 560, 660 Combines, 151 Hillside diesel, 403 Hillside, 453 Hillside, 915, 460 to serial number 32000, 1480 to serial number 34000. 7-1/8 inch x 4 inches, 12 spline. For tractor models: 1460, 1480, 151, 403, 453, 460, 560, 660, 915. Replaces 369079R92, 369079R92, 1975446C2, 121963C91, 11963C91. (Item #: 105445, Ref: 1975446C3) $19.00
Brake Housing - For model 560 and 660 with 7 1/8 inch disc. Replaces OEM numbers 369065R2 and 369065R3. (Item #: 105413, Ref: R0356) $219.00
Brake Kit - For International / Farmall tractor models 560, 660, Replaces International OEM number 1975446C2, 16028R1, 619731C1, Kit Includes: 2 Discs, 5 Steel Balls, 3 Brake Springs, (Item #: 162745) $66.00
Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $13.20
Brake Pedal Return Spring - For tractor models: 300, Super M, Super MD, Super MTA, Super W6, Super W6TA, OS6, ODS6, Super H, Super HV, 350, 400, 450, W400, W450, 460, 560, 660. Replaces IHS873. (Item #: 165220, Ref: 357164R1) $11.40
Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $14.80
No Picture Brake Shaft - For 560, 660. (4178R) (Item #: 115110, Ref: 374850R1) $66.00
Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00
Disc Brake Boot - For tractor models 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 70, Hydro 86, 2544, 2606, 2656. (Item #: 112346, Ref: 368299R1) $9.30
Spring Clutch and Brake - Spring, torque amplifer clutch release spring, 3 5/8 inches overall length. For tractor models 100, 130, 140, 400, 450, 560, 660, Super MTA, Super W6TA. (Item #: 179264, Ref: 61084D) $28.10

Clutch
Bearing - Pilot - New Pilot Bearing. 25mm (.9843 inch) inside diameter, 52mm (2.0472 inch) outside diameter with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Item #: 100023, Ref: ST544) $5.40
Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $18.50
Clutch Bearing Seal Kit - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Contents: 1-832503 Release Bearing, 1-836205 Pilot Bearing, 2-360694 IPTO Seals, 1-285253 IPTO Bearing Cage O-Ring, (Item #: 108792) $94.00
Clutch Disc - 12 inch, 4 button, spring loaded, 1.1875 inch spline diameter, 11 spline. For tractor models 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 400, 450, 500, 560, 600, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Super MTA. (Item #: 112266, Ref: 384395R94) $154.00
Clutch Disc - 12 inch diameter, 1-3/16 inch hub, 11 spline. For tractor models Super MTA, Super W6, 400, 450, 560, 660. (Item #: 172291, Ref: 375564R91) $169.00
Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $128.00
Clutch Disc - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688 (All Diesel), Replaces International OEM number 384395HD6, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Large Pads, (Item #: 112265) $140.00
Clutch Disc - For International / Farmall tractor models 504 (Farmall Gas or Diesel, /60-12/68), 504 (Gas or Diesel, /60-12/68), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 560 (Farmall Gas or Diesel, 1/58-12/63), 560 (Gas or Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 660 (Gas or Diesel, 1/59-12/63), 664 (Diesel, 1/72-12/73), 666 (Gear Drive, 1/72-12/72), 686 (Gear Drive, 1/69-12/71), 2504, 2544 (Diesel), 2606 (Diesel, 1/61-12/67), 2656 (1/63-12/71), Replaces International OEM number 375701, 1-1/2", 6 Spline, (Item #: 166109) $122.00
Clutch Disc - Inner, Used - For International tractor models 330 (1/57-12/58), 340 (& Farmall, Gas and Diesel, 1/58-12/63), 460 (& Farmall, Gas and Diesel, 1/58-12/60), 504 (& Farmall, Gas and Diesel, 1/60-12/68), 560 (& Farmall, Gas and Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 660 (Gas and Diesel, 1/59-12/63), 2504, 2606 (Diesel, 1/61-12/67), Replaces Case IH OEM number 374033R1, For a new version of this item use Item #: 168580, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457216) $4.76
Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2826, 2856, 3088, 3288, Clutch Diameter: 12", Clutch Hub Diameter: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Pad, Extra Thick, (Item #: 205991) $120.01
Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2826, 2856, 3088, 3288, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Carbotic Pads, (Item #: 205992) $153.01
Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2856, 3088, 3288, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads Thick On Flywheel Side, (Item #: 205993) $141.01
Clutch Disc, Remanufactured, 1251681C91 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, Replaces International OEM number 1251681C91, Clutch Size: 12", Clutch Hub; 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: Woven, For a New version of this sku use Item #: 130143, (Item #: 204186) $120.50
Clutch Disc, Remanufactured, 167967C93 - For International / Farmall tractor models 560, 660, Compatible with International Combine (s) 815, 915, Replaces International OEM number 167967C93, 167967HD6, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 206001) $167.50
Clutch Disc, Remanufactured, 167967C93 - For International / Farmall tractor models 560, 660, Compatible with International Combine (s) 815, 915, Replaces International OEM number 167967C93, H167967, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206002) $104.00
Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00
Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 204187) $117.00
Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Lg Pads, (Item #: 204188) $142.50
Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 204189) $167.50
Clutch Kit - This new dual 12 inch clutch kit contains: 12 inch, 17 spline, 1.75 inch hub pressure plate assembly (405300R92); 12 inch, 11 spline, 1 3/16 inch hub, cerametallic clutch disc (384395R94); pilot (524598R91) and release (365867R91) bearings, and clutch alignment tool. For tractor models: 2706, 2756, 2806, 2826, 2856, 3088, 3288, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966. (Item #: 140640, Ref: 384395R94-KIT) $420.00
Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60
No Picture Clutch Release Bearing - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Compatible with Massey Ferguson tractor models 285, 1080, 1085, 1135, 1155, 1500, 1505, 1800, 1805, Replaces Massey Ferguson OEM number 834602M1, Inside Diameter: 2.500", Outside Diameter: 4.128", Width: 0.864", (Item #: 176789) $44.00
Clutch Release Fork, Used - For International tractor models M, MD, Super M, Super MTA, 400, 450, 560, 660, Replaces International OEM nos 5800DB, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497006) $77.01
Pressure Plate - Pressure Plate, 12 inch, 12 spring, 3 levers adjust on pivot point, 1.750 inch spline diameter, 17 spline. Flywheel step, 1.406 inch. For tractor models 400, 450, 500, 560, 600, 660, Super MTA. Replaces: 359121R97, 359121R96, 359121R95, 359121R94, 359121R93, 359121R92, 359121R91, 360079R94, 360079R93, 360079R91, 359041R93, 360080R91. (Item #: 166108, Ref: 359121R98) $459.00
Pressure Plate Assembly - For International / Farmall tractor models 660, 706, 756, 766, 2706, 2756, 2806, 2826, 2856, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub Diameter: 1-3/4", Pressure Plate Splines: 17, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 206075, (Item #: 122041) $291.00
Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50
Pressure Plate Assembly, Remanufactured, 405300R92 - For International / Farmall tractor models 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 405300R92, 405300R92R, Type: Single Stage, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204193) $135.72
Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01
Pressure Plate, Remanufactured - For International / Farmall tractor models 660, 706, 756, 766, 2706, 2756, 2806, 2826, 2856, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 122041, (Item #: 206075) $145.01
Pressure Plate, Remanufactured - For International / Farmall tractor models 660, 706, 756, 766, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, (Item #: 206076) $151.01
Release Bearing - Clutch Release Bearing, inside diameter 2.49 inches, outside diameter 4.06 inches, width .820 inches, sealed roller. For mechanical release systems. For tractors: 400, W400, 450, W450, 560, 660, 756 766, 786, 886, 966, 986, 1066, 1086, 1206, 1256, 1456D, 1466, 1468, 1486, 1566, 1586, 21206, 21256, 21456, 2756, 3288, 3388, 3588, 3688, 3788 For 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. Replaces original part numbers 361407R91, 362026R91, 362027R91, 365867R91, 365868R91, 367153R91, 58612D, 69789C1 and 69789C91. (Item #: 112189, Ref: N1585) $22.50
Release Bearing - Greasable. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3688, 3788, 400, 4100, 4156, 4166, 4186, 4366, 4386, 450, 4568, 560, 6388, 6588, 660, 6788, 706, 756, 786, 806, 826, 856, 886, 966, 986, Hydro 100, W400, W450. It has an inside diameter of 2.50 inches, an outside diameter of 4.125 inches, and is .83 inches wide. Please verify measurements before ordering. (Item #: 107274, Ref: 365867R91) $24.80
T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.10

Cooling System
Belt - This Fan Belt measures 1/2 inch wide and 48 5/8 inches long. For Diesel models 2706, 2806, 656, 660, 706, 806. Verify measurements before ordering. (Item #: 123127, Ref: 378113R2) $6.70
Fan and Generator Belt - Fits engines C221, C263, C301 on tractors: 2606, 2806, 460, 560, 606, 650, 660, 806. This is also an alternator belt for D282 diesel engine in: 560, 660. Generator and water pump belt in: 706, 2706. Belt is 1/2 inches wide and 46 inches in length. (Item #: 172612, Ref: 403348R1) $16.00
Fan Belt - Generator belt measures 49.77 inches Length and 0.50 inch Width, fits engines: D236, and D282. For tractor models: 460, 560, 660. Also, for engine D282 Alternator for tractor models 656, 706, 2706. For 2706, 460, 560, 656, 660, 706. Please verify measurements before ordering (Item #: 123129, Ref: 385674R1) $10.40
Heater, Engine Block - This is a Frost Plug Heater with cord. It is 600 watts, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Power Cord is about one foot long. Replaces 407046R92. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D301. Tractors: 340, 460, 504, 560, 606, 656, 660, 706, 806, 2504, 2806. Combines: 315, 403, 503 Hillside, 503, 615, 715. (Item #: 120027, Ref: 106725A1) $43.00
Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.60
Radiator Cap - 4 pound Pressure Cap. For tractor models 100, 140, 200, 230, 300, 330, 350, 400, 450, B450, 460, 560, 600, 650, 660. Replaces: 361705R91, 370871R91, 362323R91. Not for short filler neck. (Item #: 108081, Ref: D25826) $10.00
Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.60
Radiator Cap Pressurized - For International / Farmall tractor models 100, 130, 140 (s/n 13967-earlier), 200, 230, 240, 330, 340, 460, 560, 600, 650, 660, Replaces International OEM number 393229R91, 362323R91, 370871R91, 2.050 radiator neck I.D.. Measure radiator neck before ordering, 7 PSI, (Item #: 112332) $7.98
Radiator Hose, Lower - Radiator hose, lower. For tractors to serial numbere 5274, and Farmall to serial number 37237. For tractor models Farmall 460, 560, 656, 660, 706. (Item #: 115648, Ref: 369922R1) $16.80
Radiator Hose, Lower - Radiator hose, lower for diesel tractors. International tractor to serial number 5274, and Farmall tractors to serial number 37237. For 460, 560, 656, 660, 706. (Item #: 115646, Ref: 371307R1) $13.30
Radiator Hose Upper - For model 660. (Item #: 116809, Ref: 372640R1) $26.50
Radiator Mounting Pad - For International / Farmall tractor models 460, 560, 660, Compatible with International Harvester (s) 414, 420, Replaces International OEM number 369932R1, Sold individually, (Item #: 126211) $15.40
Thermostat - Thermostat. For tractor models Gas 460, 560, 656, 660, 806, 706, 2606, 2706, 2806. Does not come with gasket. We do not have a gasket available. (Item #: 109692, Ref: 108120R92) $11.70
Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Item #: 110010, Ref: R1852) $39.00
Thermostat - This Thermostat opens at 180 degrees F. It is used on the following Diesel tractors: 2606, 2706, 300, 350, 3616, 400, 450, 460, 560, 606, 656, 660, 706, TD6. Replaces 262882R1, 313942R91 (Item #: 110455, Ref: 70229927) $20.80
Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $86.00
Water Pump By-Pass Hose - For International / Farmall tractor models 340 (Diesel), 460 (Gas), 504 (Diesel), 560, 606, 660, 706, 806 (all Gas), 2504 (Diesel), Replaces International OEM number 437575C3, 169192R1, 224563R1, 381547R1, 437575C2, 43757C1, ID: .590", OD: .926", Length 6.41", (Item #: 128128) $9.90
No Picture Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30
Water Pump Hub - Used with water pumps 601816C92, 375742R92, 375793R92. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 330, 340, 404, 460, 504, 560, 606, 660, 706, 806. (Item #: 121936, Ref: 368501R2) $36.20
Water Pump Pulley - Used with 601816C92 water pump. For tractor models Hydro 70, Hydro 86, 2606, 2656, 2706, 2756, 403, 460, 560, 606, 656, 660, 666, 706, 756, 766, 806, 826, 856. (Item #: 167558, Ref: 395815R2) $58.00
Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01

Decals and Emblems
No Picture Decal Set - Chassis only set for 560, 660, both Gas. Replaces R3609. (Item #: 100960, Ref: R3609V) $39.00
No Picture Decal Set - Chassis only set for 560, 660, both Diesel. Available as Die-Cut only. Make of vinyl. (Item #: 100960, Ref: R3610V) $39.00
Hood Ornament, Chrome - For tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544. (Item #: 108483, Ref: 369180R1) $76.00
Hood Ornament, Used - For International tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2826, Replaces International OEM number 369180R1, Chrome finish, For a new version of this item use Item #: 108483, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435392) $43.20
International 560, 660 Diesel Decal Set, Vinyl - For International / Farmall tractor models 560, 660 (Diesel), Mylar decal set use Item #: 101090, (Item #: 100961) $46.40
International Decal Set, 560, 660 Diesel, Mylar - For International / Farmall tractor models 560, 660 (Diesel), Vinyl decal set use Item #: 100961, (Item #: 101090) $52.00
International Decal Set, 560, 660, Mylar - For International / Farmall tractor models 560, 660 (Gas), Vinyl decal set use Item #: 100960, (Item #: 101089) $50.00

Drive Train
Final Drive Flanged Axle Outer Seal - This final drive flanged axle outer seal has a 2.375 inch Inside Diameter, a 3.255 inch Outside Diameter and is .5 inch wide. It Fits: 100, 130, 140, 660, 770, 780. Replaces: Felt washer: 362777R1, Seal: 363771R91, 536144R91, 362767R91 (Item #: 179297, Ref: 362777R1) $25.80
Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $25.90
Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90
PTO Disc - For International / Farmall tractor models 330, 340, 460, 504, 560, 606, 660, 2504, 2606, Compatible with International Construction and industrial models 2504, Replaces International OEM number 376825R91, 374032R91, ID: 3-3/4" (95mm), OD: 6-7/16" (163mm), 12 Teeth, (Item #: 153769) $52.00
Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01
Reverse Idler Gear Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a reverse idler gear bushing: 400, 450, 560, 660, B-450, BM, BMD, M, MD, MDV, MTA, MV, O6, ODS6, SBM, SBMD, Super M, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W6, Super WD6, W400, W450, W6, W6TA, WD6, WD6TA; Replaces: 48841D (Item #: 109669, Ref: 48841D) $13.50
Shift Lever Repair Pin Kit - For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300, Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1, (Item #: 167881) $24.50
Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $316.00
Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $45.20
Torque Amplifier Eliminator Assembly, Remanufactured - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Universal hydraulic oil (2.5 gallon) use Item #: 124173, $150.00 Core charge (Item #: 204456, Ref: 0.0) $526.00
Torque Amplifier Eliminator Kit, Remanufactured - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 204450) $395.01
Torque Amplifier Gasket Kit - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Includes: Gaskets, IPTO seals and O-Ring, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 111245) $111.00
Torque Amplifier Heavy, Remanufactured - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Iincludes: sprag kit, nut and belt pulley gear, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 204449) $1339.00
Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Item #: 113413, Ref: 361283R32) $188.00

Electrical System
Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $15.00
Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $7.70
Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: 424, 444, 450, W450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 806, 826, 856, 3514, 3616. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.20
Distributor, Remanufactured, 368051R - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2806, 2856, Replaces International OEM number 368051R, Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, (Item #: 203534) $265.01
Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.70
Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20
Generator, Delco Type, 12 Volt - For tractor models 140, 214, 220, 37, 404, 420, 424, 450, 460, 504, 560, 600, 606, 660, 700, 770, 780, 806, 2404, 2424, 2504, 2606, Cub, Lo-Boy, T6, TD6, TD9, Power Unit. Replaces Delco numbers 1100305, 1100335, 1100363, 1100364, 1100369, 1100394, 1100401, 1100409, 1100426, 1100424. Remanufactured. Refundable $25.00 core charge will be added to your order. (Item #: 203181, Ref: TG-59) $370.72
Glow Plug - For tractor models 504, 706, 656, 560, 660, 2504, 2706, 2656, 403, 405, (715 serial number 23001 and up) with engines D188, D236, D282, D301. Replaces 343894R1, 343977R1. (Item #: 111187, Ref: 304131R3) $17.00
Glow Plug - Sold individually. 0.197 inch tip diameter, 5 inch overall length and 0.311 inch outside diameter where it slides into the head. For combines: 101, 151, 181, 315, 403, 453, 503, 715. For Tractors TD6, TD9, 340, 460, 504, 560, 606, 656, 660, 706, 3514, 3616, 3800, 3850, TD340. Replaces 304131R1, 343977R1, 343894R1, 304131R3, 304131R2. (Item #: 111187, Ref: 304131R3) $17.00
Glow Plug Meter Gauge - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2606, 2656, 2706, Compatible with International Combine (s) 101, 151, 181, 403, 453, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD340, 2500, 2504, 3514, 3616, Replaces International OEM number 370380R91, 370380R92, 378352R91, 404740R1, (Item #: 121659) $49.94
Point Set - For International / Farmall tractor models 504, 606, 660, 706, 806, 2504, 2606, 2706, 2806, Replaces International OEM number 372951R91, 21A163, 1962 and later, For distributor with a gap of .020", (Item #: 111107) $16.60
Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $29.00
No Picture Starter - Delco Replaces OEM 1107543, 1107564, 1108657. TYPE: DR 20MT, 9 teeth, CCW rotation, volt/KW: 12. NOTE :C-221 Gas/LPG, LPG Engine (YR.59-58). Fits these models: 340 DSL (1962-63), 350 DSL (1956-58), 350 DSL (1957), 3514 DSL (1965-66), 3616 DSL (1965-66), 460 DSL (1958-59), 460 DSL (1962-64), 460 GAS, LPG, (1960-61), 460 GAS, LPG, (1960-64), 460 GAS with LPG, (1958-59), 460HC GAS, LPG, (1960-64), 504 DSL (1961-66), 560 GAS with LPG, (1958), 560 GAS with LPG, (1958-64), 560HC GAS with LPG, (1958-64), 606 DSL (1961-66), 606 GAS, LPG, (1961-64), 656 GAS, LPG, (1965-66), 660 GAS, LPG, (1960-61), 660 GAS with LPG (1958-59), T340 (1960-62), TD340 (1962-64), TD340 (1967), 560 GAS with LPG, (1959-64). Refundable $55.00 core charge will be added to your order. (Item #: 203447, Ref: TS-1032) $381.10
No Picture Starter - For tractor models (460 Gas, 1958 to 1959), (460, 560, 660, 606, 706 Gas, 1960 to 1967), (T340, 3515 Gas, 1958 to 1959 and 1965 to 1967), (T6 Crawler 1958 to 1963), (F504 Gas 1961 to 1965), (F656 Gas 1965 to 1966) (3616 1965). REBUILT Starter. 12 Volt. Also replaces 1107229, 1107744. (Item #: 203200, Ref: 1107720) $360.50
Starter - Delco Style DD (3853) - For International / Farmall tractor models W400, 400, 560, 660, 2606, Replaces Case OEM number 368844R91, Replaces Delco Remy manufacturer number 1113034, 1113053, Replaces manufacturer number 3853, 141-103, 91-01-3681, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For a Remanufactured version of this sku use Item #: 203410, (Item #: 182074) $405.00
Starter - Delco Style DD (3853), Remanufactured, 368844R91, Delco Remy, 1113034 - For International / Farmall tractor models W400, 400, 560, 660, 2606, Replaces Case OEM number 368844R91, Replaces Delco Remy manufacturer number 1113034, 1113053, Replaces manufacturer number 3853, 141-103, 91-01-3681, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For a New version of this sku use Item #: 182074, (Item #: 203410) $606.30
No Picture Starter - Delco Style DD (4212) - For International / Farmall tractor models 460, 504, 560, 606, 656, 660, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models T6, T340, 3514, 3616, Replaces International OEM number 374582R91, 377100R91, Replaces Case OEM number 104189A1, A480683Z, Replaces Delco Remy manufacturer number 1107229, 1108321, 1107744, 12301285, 19136156, 1107720, Replaces manufacturer number 4212, 140-747, 140-747A, 91-01-3689, For gas applications, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 9, For a Remanufactured version of this sku use Item #: 203200, (Item #: 160358) $338.18
Starter Drive - Starter drive, services Delco starters: 1108640, 1113176, 1113439, 1113649, 1108646, 1113197, 1113440, 1113684, 1113034, 1113398, 1113489, 1113685, 1113053. 10 teeth For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 186, 21206, 21256, 21456, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 400, 4166, 4186, 450, 6388, 650, 6588, 660, 6788, 706, 756, 766, 786, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186 (Item #: 110778, Ref: 1877350) $32.00
Starter Drive - Starter drive, services Delco starters: 1107228, 1107275, 1107720, 1108642, 1107229, 1107543, 1107744. For tractor models 404, 460, 504, 560, 606, 656, 660, 706, 2404, 2504, 2606, 2656, 2706. 9 teeth. (Item #: 110776, Ref: 1939109) $41.20
Starter Drive - Replaces; 1877350, 1948877, 1933838, 800965. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21456, 21256, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 350, 3588, 3688, 3788, 4166, 4186, 450, 560, 6388, 6588, 660, 6788, 706, 756, 766, 786, 806, 815, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 3488. With spiral shaft. (Item #: 117546, Ref: 1651487C1) $34.80
Starter Drive - Delco Style - Ratchet Type - For International / Farmall tractor models Hydro 100, Hydro 186, W450, 350, 350U, 400, 450, 460, 560, 660, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4166, 4186, 6388, 6588, 6788, Compatible with International Combine (s) 815, 915, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 500, Replaces International manufacturer number 1107341, 1108640, 1108646, 1107544, 1108659, 1113034, 1113053, 1113176, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, Replaces Delco Remy Starter Drive number 1877350, Replaces Delco Remy Starter number 1108640, 1108646, 1108336, 1109433, 1107390, 1109425, 10455339, 10455354, 10465416, 10465430, 1107341, 1998392, 1998290, 1998300, 10455323, 1107532, 1998332, 1998375, 1107873, 1109260, 1109271, 1107544, 1108659, 1107779, 1113034, 1113053, 1113176, 1113149, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, 1108475, 1113071, 1113117, 1113118, 10455320, Delco Style, Teeth: 10, Outer Diameter: 39.5mm, Inner Diameter: 14.3mm, Rotation: Counter Clockwise, Overall Length: 96.5mm, Clutch Type: Ratchet, Splines: 3, (Item #: 111104) $28.70
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.60
Starting Button - Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Item #: 112232, Ref: A36948) $7.60
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.00
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.00
Tune-up Kit - Tune-up Kit for an IH Distributor, 1963 and later. 6 cylinder engine (C221, C263, C291, C301). For tractor models 460, 560, 656, 660, 706, Hydro 70, Hydro 86, 666, 686, 756, 766, 806, 826, 856. With 18 mm, 1/2 inch reach, 7/8 inch spark plugs (AL 386), points, condenser, rotor and gap gauge. Verify correct spark plug size and type. (Item #: 111813, Ref: IHTK3) $36.00
Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70
No Picture Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models (560, 660 both with gas engine). (Item #: 182739, Ref: 370437R92) $379.00
No Picture Wiring Harness, Rear Light - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models (560, 660 both with gas engine). (Item #: 182732, Ref: 370386R91) $90.01

Engine Bearings
No Picture Cam Bearing Set - Camshaft bearing kit, 4 bearings. Individual bearings not available. For C291 CID gas 6 cylinder. For engine in tractors 666, 686, 706, 756, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106671, Ref: CBK-H221) $36.10
Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10
Connecting Rod Bearing Set - .020" - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 376667R91, Size: .020", (Item #: 184148) $198.00
Main Bearing Set, .010 - .010 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376679R91, 332276R91, 376670R91, 376673R91, YTO MBK221-010 (Item #: 106613, Ref: MBK221-010) $124.00
Main Bearing Set, .010 - Main Bearing Kit (.010 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 376670R91, 332276R91, 376673R91, 376679R91 (Item #: 167378) $111.00
Main Bearing Set, .020 - .020 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376683R91, 332279R91, 376686R91, 376692R91, YTO MBK221-020 (Item #: 106614, Ref: MBK221-020) $121.00
Main Bearing Set, .020 - Main Bearing Kit (.020 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 190746) $225.00
Main Bearing Set - .030 - 0.030 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used for the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382358R91, 332270R91, 367291R91, 367297R91 (Item #: 106615) $165.00
Main Bearing Set, .030 - Main Bearing Kit (.030 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 167101) $89.00
Main Bearing Set, Standard - Standard main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382357R91: 1-367276R91, 1-367282R91, 1-367279R91 and 1-367285R91 YTO MBK221 (Item #: 106612, Ref: MBK221) $111.00
Main Bearing Set, Standard - Main Bearing Kit (standard) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 382357R91, YTO MBK221A (Item #: 185622, Ref: MBK221A) $100.00
Release Bearing Carrier - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380109R1, 69789C1, I.D.: 2.500", O.D.: 4.154", Thickness: .865", (Item #: 112251) $119.00
Rod Bearing - Rod Bearing in .002. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.372 inches. Replaces YTO CRK221-002 and 367632R11. Sold individually. (Item #: 106486) $12.20
Rod Bearing - Rod Bearing in 0.010. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.364 inches. Replaces YTO CRK221-010 and 376666R11. Sold individually. (Item #: 106487) $7.40
Rod Bearing - Rod Bearing in .020. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.354 inches. Replaces YTO CRK221-020 and 376668R11. Sold individually. (Item #: 106488) $9.90
Rod Bearing - Rod Bearing in .030. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.344 inches. Replaces YTO CRK221-030 and 367631R11. Sold individually. (Item #: 106489) $12.20
Rod Bearing - Rod Bearing in standard. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Standard journal measures 2.374 inches. Replaces YTO CRK221-STD and 367408R11. Sold individually. (Item #: 106485) $13.20
Seal - For International / Farmall tractor models 400 (Farmall), 450 (Farmall), 560 (Farmall), 560, 660, Replaces International OEM number 359126R94, 19236, (Item #: 167914) $8.40
Torque Amplifier Clutch Release Fork, Used - For International tractor models 560, 660, Replaces International OEM nos 359902R4, 359902R1, 359902R2, 359902R3, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497005) $89.01
Transmission Shift Pattern Plate - For International / Farmall tractor models 340, 460, 504, 560, 606, 660, 2504, 2606, Replaces International OEM number 371371R1, (Item #: 126759) $25.80

Engine Gaskets
Conversion Gasket Set - For International / Farmall tractor models 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6 (62 Series), TD9B, Compatible with International Engine (s) D236, D282, DT282, D301, (Item #: 168998) $84.00
Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.20
Full Gasket Set - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Engine (s) C221 (6 cylinder), C263 (6 cylinder), C291 (6 cylinder), C301 (6 cylinder), Includes crankshaft seals, (Item #: 186637) $155.00
No Picture Full Gasket Set - For 560, 656, 660, 706 with D282 Diesel Engine (Item #: 106721, Ref: FS3843) $205.00
Gasket set, full - For gas C221, C263, C291 and C301 6 cylinder engines. Complete gasket set with crankshaft seals (where required). 1 used per engine. (Item #: GK7799S) $155.94
Head Gasket Set - For C291 or C301 CID gas 6 cylinder engines in tractors: 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (upper gasket set with head gasket). (Item #: 106689, Ref: VGK7799S) $100.00
Head Gasket Set - For 282 CID 6-cyl Diesel Engines in: 2606, 2656, 2706, 460, 560, 606, 656, 660, 706. (Upper gasket set with head gasket). (Item #: 106690, Ref: VGK8334SB) $140.00
Head Gasket Set - Used on International D301, UD236, UD282, UDT282, D236, D282, DT282 6 Cylinder Engines. It includes nozzle and precup gaskets. Replaces 134403A1 (Item #: 106690, Ref: HS3843) $140.00
No Picture Lower Gasket Set - For tractor models 560, 656, 660, 706 with C263 gas engine. (Item #: 106725, Ref: CS3153) $68.00
Oil Pan Gasket - Oil Pan Gasket. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106706, Ref: 369984R1) $10.80
Push Rod Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301, D236, D282, Replaces International OEM number 369982R1, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128736) $17.20
Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $22.20
Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301 (Gas), Replaces International OEM number 369983R2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128683) $10.50

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - For tractor models 560 to serial number 36693 and 660 to serial number 38981. (C263 CID Gas 6-cylinder engine. Stepped head pistons.) Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. YTO BEKH1170-LCB (Item #: 130604) $687.00
Basic Engine Overhaul Kit, Less Bearings - For tractor models 560 serial number 36694 and up and 660 serial number 38982 and up. (C263 CID Gas 6-cylinder engine. Stepped head pistons.) Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. YTO BEKH1170A-LCB. (Item #: 184323, Ref: BEKH1170A-LCB) $1299.98
Basic Engine Overhaul Kit, Less Bearings - D282 Diesel - For D282 CID Diesel 6-cylinder engine. Cupped head piston. Tractor models 560 and 660 using Engine serial number 40699 to serial number 44821 AND tractor models 656, 706, 2656 and 2706 using up to Engine serial number 44821. Sleeve flange diameter 4.165 inch. Kit contains sleeves and sleeve seals, pistons and piston rings (3-11/16 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130605, Ref: BEKH1174-LCB) $843.00
Basic Engine Overhaul Kit, Less Bearings - D282 Diesel - For D282 CID Diesel 6-cylinder engine, cupped head piston. For tractor models 560 and 660 Engine serial number 44822 and up and models 656, 706, 2656 and 2706 all with Engine serial number 44822 to serial number 71777. Kit contains sleeves and sleeve seals, pistons and piston rings (3-11/16 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: BEKH1174B-LCB) $925.00
No Picture Basic In-Frame Engine Kit - For tractor models 560 and 660. (C263 CID Gas 6-cylinder engine. Stepped head pistons.) Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: BIFH1170) $1034.00
Basic In-Frame Engine Kit - D239 Diesel - For tractor models 560, engine serial number 6766 and up, 660 engine serial number 4370 and up and models 656, 706, 2656 engine serial number 44821 to serial number 71777. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers (3-11/16 inch standard bore), upper gasket set (with head gasket) and pan gasket. (Item #: 189588, Ref: BIFH1174) $818.65
Engine Cylinder Sleeve - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9, TD9B, TD340, 2500, Compatible with International Engine (s) D166 (early), D188 (early), D236, D282 (.875" pin, wide flange liner), DT282 (1.125" pin, wide flange liner), Replaces International OEM number 278272R1, Bore: 3.6875", Flange O.D.: 4.165", Flange Thickness: .1875", (Item #: 108753) $67.00
No Picture Valve Overhaul Kit - Fits 460, 606, 2606, 560, 660 (gas 6 cylinder C221, C263). Kit includes valves (intake valve head DIAMETER 1-21/32 inch), Stellite Exhaust Valve, valve springs, valve keys, valve guides. (Item #: VOKH221S) $298.18
Valve Overhaul Kit - Fits 460 engine serial number 5611 to 10983, 560 engine serial number 6766 to 29264, 660 engine serial number 4370 to 29264, (6 cylinder D236, D282 CID). Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH282A) $339.99
No Picture Valve Overhaul Kit - Fits 460 (engine serial number 10984 and up), 560, 660 (engine serial number 29265 to 40698), 6 cylinder Diesel D236, D282. Kit includes 12 - 315744R1 valve springs, 12 - 278300R1 valve guides, 24 - 70209103 valve keys, 6 - 278301R1 intake valves, 6 - 278302R1 exhaust valves. (Item #: 185433, Ref: VOKH282B) $337.00

Engine Parts
No Picture Belt Pulley Block Off Plate - For International / Farmall tractor models I6, M, MD, OS6, Super M, Super W6, W6, 400, 450, 560, 660, Replaces International OEM number 49053DB, 365128RI, (Item #: 126478) $42.70
Bushing, Connecting Rod - Connecting rod bushing used with 1.250 inch wrist pin only. Does not fit .875 inch wrist pin. For tractor models 460, 560, 606, 660 (engine serial number 40699 to serial number 48821), 656, 706, 2606, 2656, 2706 (to serial number 44821). (Item #: 115590, Ref: 306708R1) $11.00
Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01
Clutch Shaft Coupler - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, For applications with mechanical TA, Coupler Does Not Include Part 364411R1 Snap Ring, (Item #: 113408) $59.00
Connecting Rod Bolt - For International / Farmall tractor models 330 (1/57-12/58), 340 (Farmall, Diesel, 1/58-12/63), 340 (Diesel, 1/58-12/63), 340 (Utility, Gas, 1/58-12/63), 460 (Diesel, 1/58-12/63), 460 (Utility, Gas, 1/58-12/63), 460 (Farmall Diesel, 1/58-12/60), 460 (Farmall, Gas, 1/58-12/63), 504 (Farmall 1/60-12/68), 504 (Diesel, 1/60-12/68), 560 (Farmall, Diesel, 1/58-12/63), 560 (Diesel, 1/58-12/63), 560 (Utility, Gas, 1/58-12/63), 606 (1/61-12/67), 660 (Diesel, 1/63-12/67), 660 (Gas, 1/59-12/63), 706 (Farmall, 1/63-12/67), 706 (1/63-12/67), 806, 806 (Farmall), 2504, 2606 (Diesel, 1/61-12/67), 2706 (s/n 1/63-12/67), Compatible with International Combine (s) 303 (Bean Special, 1/62-12/68), Compatible with International Harvester (s) 55 (With Row Crop Unit), 350 (With Row Crop Unit), 414, 420, 550 (With Row Crop Unit), 650, Replaces International OEM number 316366R1, (Item #: 165562) $21.20
Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01
Connecting Rod, Used - For International tractor models 330, 340, 460, 504, 560, 656, 660, 706, 2500, 2504, 2606, 2706, 3514, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D166, D188, D236, D282, D301, Replaces International OEM nos 306280R12, Replaces Casting nos 306280, 306280R, 306280R1, Diesel Engines, Length Center to Center: 7.250", Housing Bore: 2.4995" - 2.5000", Pin Diameter: 1.1252" - 1.1258", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498382) $50.01
Crankshaft Pulley, Used - For International tractor models 560, 660, 706, 806, Replaces International OEM nos 338952R91, Oter Pulley O.D.: 5", Inner Pulley O.D.: 6-3/4", Grooves: 2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498378) $176.01
Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30
Drive Shaft Coupling, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, Splines: 14, For a new version of this item use Item #: 113408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435618) $31.01
No Picture Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.10
No Picture Fan Pulley, Used - For International tractor models 460, 560, 660, Compatible with International Engine(s) C263, Replaces International OEM nos 368509R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441261) $120.01
Flywheel Ring Gear - For International / Farmall tractor models 560 (Gas), 660 (Gas), Compatible with International Harvester (s) 616 (Gas engine C-291), 622 (Gas engine C-291), Replaces Case IH OEM number 367507R1, 160 Teeth, 14.945" I.D., (Item #: 159132) $55.00
No Picture Head Biolt Kit - For International / Farmall tractor models 560 (Engine s/n 6766-44821), 606 (Engine s/n 13754-16620), 660 (Engine s/n 4370-44821), 2606 (Engine s/n 13754-16620), 2656 (Engine s/n 7177-later), 3616 (Engine s/n 13754-16620), Compatible with International Combine (s) 151, 181, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6 (62 Series), Compatible with International Engine (s) D236, D282, Replaces International OEM number 7326896, 53268128, NR76126, (Item #: 170117) $224.00
Intake Rocker Arm, Used - For International tractor models 560, 660, 706, 2606, 2706, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D188, D236, D282, D301, Replaces International OEM nos 323727R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441146) $22.51
No Picture Intake Valve - For International / Farmall tractor models 460 (Engine C221 CID, s/n 35093-earlier), 460 (Engine C221 CID, s/n 35094-later), 560 (Engine C263 CID, s/n 36693-earlier), 560 (Engine C263 CID, s/n 36694-later), 606 (Engine C221 CID, s/n 35093-earlier), 606 (Engine C221 CID, s/n 35094-later), 660 (Engine C263 CID, s/n 38981-earlier), 660 (Engine C263 CID, s/n 38982-later), 2606 (Engine C221 CID, s/n 35093-earlier), 2606 (Engine C221 CID, s/n 35094-later), Compatible with International Combine (s) 303 (Engine C221 CID), Compatible with International Harvester (s) 414 (Engine C263 CID), 420 (Engine C263 CID), Compatible with International Engine (s) C221 (CID), C263 (CID), Replaces International OEM number 234275R1, Diameter: 1.66", (Item #: 173268) $15.00
Mechanical TA Back Gear - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Replaces International OEM number 361288R3, (Item #: 113410) $334.00
Mechanical TA Back Gear - Less belt pulley gear - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Replaces International OEM number 361288R3, Does not have belt pulley gear, (Item #: 113412) $358.00
Pre-Combustion Chamber, Used - For International tractor models 560, 660, 706, 2706, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D282, D301, Replaces International OEM nos 278275R3, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429624) $117.01
Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90
Push Rod, Used - For International tractor models 330, 340, 350, 460, 504, 560, 606, 660, 706, 806, 2504, 2606, 2706, Compatible with International Combine(s) 303, Compatible with International Harvester(s) 55, 414, 420, 550, 650, Replaces International OEM nos 164436R91, Length: 12 3/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430417) $7.51
Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40
Ring Gear, Flywheel - For tractor models M, MD, 0DS6, Super M, Super MD, Super W6, WD6, W400, W450, W6, 400, 450, (560, 660 ALL DIESEL ONLY). This ring gear has 125 teeth, 15.72 inch outside diameter, .80 inches wide. (Item #: 103907, Ref: 266142R1) $84.00
No Picture Ring Gear, Flywheel - 125 Teeth For M, MD, Super M, Super MD, W-6, WD-6, 400, 450 Gas or Diesel460, 660 Diesel (Item #: 103907, Ref: R1849) $84.00
Second Speed Drive Gear, Used - For International tractor models Super M, Super MTA, 400, 450, 560, 660, Replaces International OEM nos 358857R1, Teeth: 28, 2nd Speed Driving Gear, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498376) $147.01
Set Of Three Sungears - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, (Item #: 113409) $156.00
TA Clutch Carrier, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359895R3, For a new version of this item use Item #: 165256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441430) $45.01
Torque Amplifier Carrier - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces Case IH OEM number 359895R3, Teeth: 27, Flywheel Step: .900", (Item #: 165256) $167.00
No Picture Valve Cover, Used - For International tractor models 460, 560, 660, 706, 2606, 2706, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D236, D282, D301, Replaces International OEM nos 278307R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440572) $101.01
No Picture Valve, Exhaust - This exhaust valve is for tractor models 460 (221 CID Gas 6-cylinder engine)and Models 560 and 660 (C263 CID Gas 6-cylinder engine). Price shown is for each, sold only in multiples of 2 items. Order one and you will receive one valve. Order two and you will receive 2 valves. (Item #: 128502, Ref: 367191R2) $23.80
No Picture Valve, Exhaust - Exhaust Valve for tractor models 460. (D236 CID Diesel 6-cylinder engine. Cupped head piston and models 560 engine serial number 6766 to serial number 40698 and 660 engine serial number 4370 to serial number 40698. (D282 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 173263, Ref: 278302R1) $21.20
Valve, Exhaust - Price shown is for each, sold only in multiples of 2 items. For tractor models 606, 2606, 656, 706, 2656, 2706. (D236 CID Diesel 6-cylinder engine. Cupped head piston) and models 560, 660 engine serial number 40699 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 166557, Ref: 612312C1) $19.90
Valve Guide - VALVE GUIDE For 2504, 2606, 2656, 2706, 3514, 460, 504, 560, 606, 656, 660, 706. (Item #: 173029, Ref: 278300R1) $10.10
Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70
No Picture Valve, Intake - Intake Valve. For tractor models 460. (D236 CID Diesel 6-cylinder engine. Cupped head piston and models 560 engine serial number 6766 to serial number 40698 and 660 engine serial number 4370 to serial number 40698. (D282 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 278301R1) $9.75
Valve, Intake - Price shown is for 1 Intake Valve. MUST BE ORDERED IN MULTIPLES OF 2. For tractor models 606, 2606, 656, 706, 2656, 2706. (D236 CID Diesel 6-cylinder engine. Cupped head piston) and models 560, 660 engine serial number 40699 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Replaces 323774R1, S1956, 323774R2 (Item #: 173795, Ref: 323774R1) $14.10
No Picture Valve, Intake Set - Set of 6 Intake Valves. For model 460 (221 CID Gas 6-cylinder engine) and models 560 and 660 (C263 CID Gas 6-cylinder engine). (Item #: 234275R1) $61.85
Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $58.00
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 2606, 460, 560, 606, 660. Contains: springs, guides, locks, (no valves). (Item #: 131580, Ref: VSKH221) $234.00
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 460, 560, 660. Contains: springs, guides, locks, (no valves). (Item #: VSKH282A) $141.92
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 2606, 2656, 2706, 460, 560, 606, 656, 660, 706. Contains: springs, guides, locks, (no valves). (Item #: VSKH282B) $150.76
No Picture Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.70
Valve Tappet 0.999 Inch - These tappets are used in the following engines: C221, C263, C291, C301, (DT436 Engine serial number <121624), (DT436B Engine serial number <121624), (DT466 Engine serial number <140087), (DT466B Engine serial number <140087), D188, D236, D282, D360, D361, (D414 Engine serial number <155806), (D436 Engine serial number <121624), (D466 Engine serial number <140087). They are 0.999 inch diameter. Replaces original part numbers 72524R3, 684729C1, 911776R3, 91176R2, 911776R1, 76952R2, 677541C1, 606492, 28708A, 75524R3, 75524R2, 75524R1. (Item #: 108437, Ref: 911776R3) $7.80
Valve Train Kit - For International / Farmall tractor models 460 (engine s/n 5610-later), 560, 606, 656, 660, 706, 2606, 2656, 2706 (engine s/n 44822-71777), 3616 (engine s/n 16620-later), Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 315, 403, 453, 503, 615 (engine s/n 44821-later), 715 (s/n 23000-earlier), Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9 (92 series), TD9B (engine s/n 6903-11440), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) D236, D282, DT282, D301 (all 6 cylinder diesel), For applications with rotator below spring, Kit includes: Intake and exhaust valves, guides, springs and keepers, Intake Valves: 1.680" head diameter, 6.040" length, 45 degrees, Exhaust Valves: 1.370" head diameter, 6.060" length, 45 degrees, (Item #: 120319) $311.00
No Picture Valve Train Kit - For International / Farmall tractor models 460, 560, 606, 660, 2606, 3616, Compatible with International Combine (s) 205, 303, 315, 403, Compatible with International Harvester (s) 414, Compatible with International Engine (s) C221, C263, Includes: Valve Keeper, Intake Valve, Valve Guide, Exhaust Valve, Valve Spring, Valve Guide and Valve Rotator, (Item #: 169083) $363.00

Engine Pistons and Sleeves
Cylinder Sleeve - Used on C221 gas engines on 460, 606, 2606, 3616 and C263 gas engines on 560, 656, 660, 706, 2656, 2706, 3600A, 3800, 3850, this is a standard bore cylinder sleeve. It measures; Bore Diameter: 3.5625 inches / 90.4875mm, Flange Outer Diameter: 4.052 inches / 102.9208mm Flange Width: 0.189 inches / 4.8006mmm, Sleeve O.D. at Barrel: 3.6890 inches / 93.7006mm, Length: 7.625 inches / 193.6750mm. Replaces 367645R1, 3803698, RP141294, SD372 (Item #: 128647, Ref: 367645R1) $62.00
Piston Pin Bushing - Piston pin bushing, 4 or 6 used per engine depending on application. .875 inch inside diameter, .935 inch outside diameter. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2856, 300, 350, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 109736, Ref: 364913R1) $6.50
Sleeve and Piston Kit - Sleeve and Piston Kit for tractor models 560 engine serial number 6766 to serial number 44821 and 660 engine serial number 4370 to serial number 44821 and models 656, 706, 2656 to engine serial number 44821. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 3-11/16 inch standard bore. (Item #: PK174) $713.49
Sleeve and Piston Kit, Single Cylinder - For tractor models 560 and 660. (C263 CID Gas 6-cylinder engine. Stepped head pistons). Sleeves, pistons and rings, pins and retainers. For 3-9/16 inch standard bore. Compression height of 1.812 inches. (Item #: 131625, Ref: PK170) $123.00

Engine Rings
Piston - For International / Farmall tractor models 560 (s/n 36693-earlier), 660 (s/n 38961-earlier), Compatible with International Harvester (s) 414 (s/n 25964-32459), 420 (s/n 25964-32459), Compatible with International Construction and industrial models T6 (s/n 36693-earlier), Compatible with International Engine (s) C263 (Gas and LP), Replaces International OEM number 367642R1, (Item #: 166786) $93.00
No Picture Piston Ring Set - Ring set for 6 pistons, 1 used per engine. For 3-9/16 std. bore. For C263 CID gas 6 cylinder engine. Contains 3 compression 3/32 and oil ring 3/16 for each cylinder. For 560, 660 (Item #: 187026, Ref: PRS170) $258.00
Piston Ring Set - PISTON RING SET. For 2656, 2706, 560, 656, 660, 706 all with 282 CID 6 cylinder diesel with standard bore 3 11/16 inches, to engine serial number 29264, cupped head piston, 4.165 inch sleeve flange diameter, 1 5/16 inch exhaust valve head diameter, 3 3/4 inch thrust bearing flange. Piston ring set, 2 at 1/8 inch (top ring is half keystone), 1 at 1/4 inch. 1 kit per engine. (Item #: 174314, Ref: PRS174) $102.00
Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Standard Bore: 3.5625", Ring Size: .030” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 120862, (Item #: 120861) $38.98
Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Standard Bore: 3.5625", Ring Size: .040” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 120861, (Item #: 120862) $43.00
Piston Ring Set - Standard - 2 Cylinder - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6, TD9B, TD340, 2500, Compatible with International Engine (s) D166, D188, D236, D282, DT282, Bore: 3.6875", Compression Rings per Piston: (2) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Half Keystone, Chrome 10 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a 2 cylinder set, (Item #: 128966) $75.00
Piston Ring Set - Standard - 2 Cylinder - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6, TD9B, TD340, 2500, Compatible with International Engine (s) D166, D188, D236, D282, DT282, Bore: 3.6875", Compression Rings per Piston: (2) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Half Keystone, Chrome 10 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a 2 cylinder set, For single cylinder set use Item #: 108754, (Item #: 179121) $99.00
No Picture Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Replaces International OEM number 539379R2, Bore: 3.5625", Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .030" use Item #: 120862, (Item #: 108033) $16.70

Exhaust System
Exhaust Manifold Pipe - 2 1/2 inch inside diameter x 2 15/16 inch outside diameter x 18 used with 384290R1 manifold. For tractor models 460, 560, 606, 660, 686, 656, 666, 706, 756, 766, 806, 826, 2826, 2856, Hydro 70, Hydro 86, 856. (Item #: 113422, Ref: 383974R2_) $33.00
Exhaust Pipe - For tractor models 2544, 2656, 460, 544, 560, 656, 660. (Item #: 126744, Ref: 369613R1) $31.20
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Style: Curved, Inlet I.D.: 2-3/8", O.D.Pipe: 2-1/2", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115481) $165.88
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number A29991, Style: Curved, Inlet I.D.: 2-3/8", O.D. Pipe: 4", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115486) $209.00
Exhaust Stack - 2-3/8" X 36", Straight Chrome - For International / Farmall tractor models Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number 62476D, Style: Straight, Inlet I.D.: 2-3/8", O.D. Pipe: 3", Length: 36", Chrome Plated, Eliminates Muffler, (Item #: 115487) $134.11
Intake Manifold Pilot - Ferrule - For International / Farmall tractor models Hydro 70, Hydro 86, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2806, 2826, Compatible with International Harvester (s) 414, 420, 616, 622, Replaces International OEM number 138733R1, 1.630" Step, 1.690" Outside Diameter, (Item #: 167365) $23.70
Manifold, Exhaust - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 Gas Engines. This also fits 460, 560, 606, 656, 660 if you cut the hole in the hood larger, or if you use R0057A offset adapter. Gasket set is R0057G, If needed please add to your order. (Item #: 101556, Ref: 384290R1) $234.00
Manifold Heat Control Spring - Used on Farmall and International models 560, 806, 2606, 2656, 2706, Hydro 70, 2756, 2806, 2826, Hydro 86, 460, 606, 656, 660, 666, 706, 756, 766, 826, 856, 686, this part replaces 82958R2, 82958R1 (Item #: 179404, Ref: 82958R2) $36.30
Manifold Heat Control Weight - Made of cast iron. For gas Models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856. (Item #: 121566, Ref: 85699R1) $23.70
Manifold, Intake - This Intake manifold is for tractor models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2826, 2856, Hydro 70, Hydro 86 all with C263 or C291 gas engines. MIncludes Heat Valve Assembly. Replaces 367261R11 383705R11, IHS154. (Item #: 101554, Ref: 393705R11) $216.00
Muffler - Vertical muffler for gas and diesel tractor, fits engines C200, 221, C263, D166, D188, D236, D239, D282. Inlet inside diameter 1-7/8 inch, outlet outside diameter 1-7/8 inch length 22-1/2 inches, diameter 4-1/2 inches, round body. For tractor models 544, 2544, 460, 606, 2606, 560, 656, 660, 2656, 340 For 2504, 2544, 2606, 2656, 340, 460, 504, 544, 560, 606, 656, 660, 664. (Item #: 100806, Ref: 371039R91) $60.00
Muffler - For International / Farmall tractor model 660 (C-263 gas), Replaces International OEM number 376352R91, Replaces manufacturer number IH-15, Muffler mount: Vertical, Overall Length: 29", Shell Diameter: 4-1/4", Shell Length: 20", Inlet I.D.: 2-3/8", Inlet Length: 4-1/4", Outlet O.D.: 2-1/2", Outlet Length: 5", Color: Silver, Inlet Clamp use Item #: 108635, (Item #: 100812) $61.00
Muffler - Horizontal Exhaust Inlet inside diameter 1 7/8 inch, outlet outside diameter 2 inches, overall length 22 1/2 inches. For International 460, 460 Grove, 606 with C221 Gas or D236 Diesel Engines 504 (from serial number 3104) with D188 Diesel 560, 656, 660 with C263 Gas or D282 Diesel Engines. OEM number use R1750 inlet clamp, use R1751 outlet clamp. (Item #: 100806, Ref: R1658) $60.00
Muffler - Vertical Exhaust Inlet inside diameter 2 3/8 inch, outlet outside diameter 2 1/2 inch, overall length 29 inches. For International 660 with C263 Gas Engine. OEM number use MC212 clamp, use R1802 rain cap. (Item #: 102684, Ref: R1099) $52.00
Muffler Clamp - Muffler clamp. For 100, 130, 140, 200, 230, 240, 340, 404, 424, 460, 504, 560, 606, 656, 660, 664, A, B, C, Super AV, Super C, Super A bad part (Item #: 180044, Ref: 48889DA) $13.70
Muffler Clamp With Hardware - Muffler clamp with hardware. 2 1/2". For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Item #: 178185, Ref: 350602R1) $14.50
Muffler Eliminator - 2-3/8" X 24", Straight Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Inlet I.D: 2-3/8", O.D. Pipe: 3", Length: 24", Straight Pipe, Chrome Plated, Eliminates Muffler, (Item #: 115491) $81.17
Muffler - Restoration Quality - For International / Farmall tractor models 340, 460, 504, 544, 560, 606, 656, 660, 2606, 2656, Replaces International OEM number 370644R91, 370773R91, 403551R1, High Temperature Paint, IH logo and part number stamped to muffler, Inlet Length: 2.063", Inlet ID:2.400", Inlet OD: 2.540", Shell Length: 12", Shell Diameter: 6", Outlet Length: 13", Outlet OD: 2-1/2', Overall Length: 27-1/2", (Item #: 164540) $83.00
Offset Exhaust Manifold Adapter - Used with 384290R1 manifold to realign the exhaust with the hole in the hood, on models 560, 2606, 460, 606, 660. This is a 2 inch NPT adapter designed to fit and offsets the pipe and steps down the diameter so that the exhaust pipe is in the same place and has the same diameter as a factory exhaust (Item #: 125212, Ref: R0057A) $45.00
Stainless Steel Muffler - Show Quality - For International / Farmall tractor models 340, 460, 504, 544, 560, 606, 656, 660, 2606, 2656, Replaces International OEM number 370644R91, 370773R91, 403550R1, Polished Stainless Steel, Inlet Length: 2.063", Inlet ID: 2.400", Inlet OD: 2.540", Shell Length: 12", Shell Diameter: 6', Outlet Length: 13", Outlet OD: 2-1/2", Overall Length: 27-1/2', (Item #: 164541) $197.87